Geology topics

Christoph Kern

Publications and source records attributed to Christoph Kern.

At least 37 records · Page 2Linked to original sources

USGS2021

Synoptic analysis of a decade of daily measurements of SO2 emission in the troposphere from volcanoes of the global ground-based Network for Observation of Volcanic and Atmospheric Change

Volcanic plumes are common and far-reaching manifestations of volcanic activity during and between eruptions. Observations of the rate of emission and composition of volcanic plumes are essential to recognize and, in some cases, predict the state of volcanic activity. Measurements of the size and location of the plumes are important to assess the impact of the emission from sporadic or localized events to persistent or widespread processes of climatic and environmental importance. These observations provide information on volatile budgets on Earth, chemical evolution of magmas, and atmospheric circulation and dynamics. Space-based observations during the last decades have given us a global view of Earth's volcanic emission, particularly of sulfur dioxide ( SO 2 ). Although none of the satellite missions were intended to be used for measurement of volcanic gas emission, specially adapted algorithms have produced time-averaged global emission budgets. These have confirmed that tropospheric plumes, produced from persistent degassing of weak sources, dominate the total emission of volcanic SO 2 . Although space-based observations have provided this global insight into some aspects of Earth's volcanism, it still has important limitations. The magnitude and short-term variability of lower-atmosphere emissions, historically less accessible from space, remain largely uncertain. Operational monitoring of volcanic plumes, at scales relevant for adequate surveillance, has been facilitated through the use of ground-based scanning differential optical absorption spectrometer (ScanDOAS) instruments since the beginning of this century, largely due to the coordinated effort of the Network for Observation of Volcanic and Atmospheric Change (NOVAC). In this study, we present a compilation of results of homogenized post-analysis of measurements of SO 2 flux and plume parameters obtained during the period March 2005 to January 2017 of 32 volcanoes in NOVAC. This inventory opens a window into the short-term emission patterns of a diverse set of volcanoes in terms of magma composition, geographical location, magnitude of emission, and style of eruptive activity. We find that passive volcanic degassing is by no means a stationary process in time and that large sub-daily variability is observed in the flux of volcanic gases, which has implications for emission budgets produced using short-term, sporadic observations. The use of a standard evaluation method allows for intercomparison between different volcanoes and between ground- and space-based measurements of the same volcanoes. The emission of several weakly degassing volcanoes, undetected by satellites, is presented for the first time. We also compare our results with those reported in the literature, providing ranges of variability in emission not accessible in the past. The open-access data repository introduced in this article will enable further exploitation of this unique dataset, with a focus on volcanological research, risk assessment, satellite-sensor validation, and improved quantification of the prevalent tropospheric component of global volcanic emission.

Earth System Science Data↗

USGS2020

Linking subsurface to surface using gas emission and melt inclusion data at Mount Cleveland volcano, Alaska

Mount Cleveland is one of Alaska's most active volcanoes, yet little is known about the magmatic system driving persistent and dynamic volcanic activity. Volcanic gas and melt inclusion (MI) data from 2016 were combined to investigate shallow magmatic processes. SO 2 emission rates were between 166 and 324 t/day and the H 2 O/SO 2 was 600 ± 53, whereas CO 2 and H 2 S were below detection. Olivine‐, clinopyroxene‐, and plagioclase‐hosted MIs have up to 3.8 wt.% H 2 O, 514 ppm CO 2 , and 2,320 ppm S. Equilibration depths, based on MI H 2 O contents, suggest that a magmatic column extended from 0.5 to 3.0 km (~10–60 MPa). We used MI data to empirically model open‐system H‐C‐S degassing from 0 to 12 km and found that a column of magma between 0.5 and 3 km could produce the measured gas H 2 O/SO 2 ratio. However, additional magma deeper than 3 km is required to sustain emissions over periods greater than days to weeks, if the observed vent dimension is a valid proxy for the conduit. Assuming an initial S content of 2,320 ppm, the total magma supply needed to sustain the annual SO 2 flux was 5 to 9.8 Mm 3 /yr, suggesting a maximum intrusive‐to‐extrusive ratio of 13:1. The model predicts degassing of <50 t/day CO 2 for July 2016, which corresponds to a maximum predicted CO 2 /SO 2 of 0.2. Ultimately, frequent recharge from deeper, less degassed magma is required to drive the continuous activity observed over multiple years. During periods of recharge we would expect lower H 2 O/SO 2 and measurable volcanic CO 2 .

Alaska↗

USGS2020

Quantifying gas emissions associated with the 2018 rift eruption of Kīlauea Volcano using ground-based DOAS measurements

Starting on 3 May 2018, a series of eruptive fissures opened in Kīlauea Volcano’s lower East Rift Zone (LERZ). Over the course of the next 3 months, intense degassing accompanied lava effusion from these fissures. Here, we report on ground-based observations of the gas emissions associated with Kīlauea’s 2018 eruption. Visual observations combined with radiative transfer modeling show that ultraviolet light could not efficiently penetrate the gas and aerosol plume in the LERZ, complicating SO 2 measurements by differential optical absorption spectroscopy (DOAS). By applying a statistical method that integrates a radiative transfer model with the DOAS retrievals, we were able to calculate sulfur dioxide (SO 2 ) emission rates along with estimates of their uncertainty. We find that sustained SO 2 emissions were highest in June and early July, when approximately 200 kt SO 2 were emitted daily. At the 68% confidence interval, we estimate that 7.1–13.6 Mt SO 2 were released from the LERZ during the entire May to September eruptive episode. Scaling our results with in situ measurements of plume composition, we calculate that 11–21 Mt H 2 O and 1.5–2.8 Mt CO 2 were also emitted. The gas and aerosol emissions caused hazardous conditions in areas proximal to the active vents, but plume dispersion modeling shows that the eruption also significantly impacted air quality hundreds of kilometers downwind. Combined with petrologic studies of the erupted lavas, our measurements indicate that 1.1–2.3 km 3 dense-rock equivalent of lava were erupted from the LERZ, which is approximately twice the concomitant collapse volume of the volcano’s summit.

Hawaii↗

USGS2020

Chemical evaluation of water and gases collected from hydrothermal systems located in the central Aleutian arc, August 2015

Five volcanic-hydrothermal systems in the central Aleutians Islands were sampled for water and gas geochemistry in 2015 to provide baseline data to help predict future volcanic unrest. Some areas had not been sampled in 20–30 years (Makushin volcano, Geyser Bight), and other areas had minimal to no prior sampling (Tana volcano and Fisher Caldera). The chemical and isotopic data of the waters show a wide variety of characteristics typical of hydrothermal settings. Stable isotopic analyses of the waters show no evidence for primary magmatic water, rather that waters have a meteoric origin that is variably influenced by boiling and evaporation processes. The carbon and helium isotopic analyses of gases suggest they contain a primary magmatic component typical of the upper mantle at most locations, and the CO 2 /S ratios show that these gases have been modified by interactions with groundwater along the flow paths. Some areas demonstrate stable compositions since the last sampling (for example, Akutan hydrothermal areas), with some being remarkably steady over very long periods (for example, Geyser Bight). Other areas show modifications because of either lower amounts of upwelling from hydrothermal sources or lower amounts of magmatic influence on the surface chemistry (for example, Upper Glacial valley of Makushin, an informally named valley leading south of the volcano toward Makushin Bay to the south). Finally, this report highlights that previously unsampled regions in the Aleutian Islands, such as Tana volcano and Fisher Caldera (the latter found to have one of the highest helium isotopic signatures ever measured in the Aleutian Islands), show evidence of ongoing subsurface magmatism that warrants continued investigation in terms of volcanic hazard.

Alaska↗

USGS2020

Spatial and temporal variations in SO2 and PM2.5 levels around Kīlauea volcano, Hawai'i during 2007–2018

Among the hazards posed by volcanoes are the emissions of gases and particles that can affect air quality and damage agriculture and infrastructure. A recent intense episode of volcanic degassing associated with severe impacts on air quality accompanied the 2018 lower East Rift Zone (LERZ) eruption of Kīlauea volcano, Hawai'i. This resulted in a major increase in gas emission rates with respect to usual emission values for this volcano, along with a shift in the source of the dominant plume to a populated area on the lower flank of the volcano. This led to reduced air quality in downwind communities. We analyse open-access data from the permanent air quality monitoring networks operated by the Hawai'i Department of Health (HDOH) and National Park Service (NPS), and report on measurements of atmospheric sulfur dioxide (SO 2 ) between 2007 and 2018 and PM 2.5 (aerosol particulate matter with diameter <2.5 μm) between 2010 and 2018. Additional air quality data were collected through a community-operated network of low-cost PM 2.5 sensors during the 2018 LERZ eruption. From 2007 to 2018 the two most significant escalations in Kīlauea's volcanic emissions were: the summit eruption that began in 2008 (Kīlauea emissions averaged 5–6 kt/day SO 2 from 2008 until summit activity decreased in May 2018) and the LERZ eruption in 2018 when SO 2 emission rates reached a monthly average of 200 kt/day during June. In this paper we focus on characterizing the airborne pollutants arising from the 2018 LERZ eruption and the spatial distribution and severity of volcanic air pollution events across the Island of Hawai'i. The LERZ eruption caused the most frequent and severe exceedances of the Environmental Protection Agency (EPA) PM 2.5 air quality threshold (35 μg/m 3 as a daily average) in Hawai'i in the period 2010–2018. In Kona, for example, the maximum 24-h-mean mass concentration of PM 2.5 was recorded as 59 μg/m 3 on the twenty-ninth of May 2018, which was one of eight recorded exceedances of the EPA air quality threshold during the 2018 LERZ eruption, where there had been no exceedances in the previous 8 years as measured by the HDOH and NPS networks. SO 2 air pollution during the LERZ eruption was most severe in communities in the south and west of the island, as measured by selected HDOH and NPS stations in this study, with a maximum 24-h-mean mass concentration of 728 μg/m 3 recorded in Ocean View (100 km west of the LERZ emission source) in May 2018. Data from the low-cost sensor network correlated well with data from the HDOH PM 2.5 instruments, confirming that these low-cost sensors provide a robust means to augment reference-grade instrument networks.

Hawaii↗

USGS2019

The 2017-19 activity at Mount Agung in Bali (Indonesia): Intense unrest, monitoring, crisis response, evacuation, and eruption

After 53 years of quiescence, Mount Agung awoke in August 2017, with intense seismicity, measurable ground deformation, and thermal anomalies in the summit crater. Although the seismic unrest peaked in late September and early October, the volcano did not start erupting until 21 November. The most intense explosive eruptions with accompanying rapid lava effusion occurred between 25 and 29 November. Smaller infrequent explosions and extrusions continue through the present (June 2019). The delay between intense unrest and eruption caused considerable challenges to emergency responders, local and national governmental agencies, and the population of Bali near the volcano, including over 140,000 evacuees. This paper provides an overview of the volcanic activity at Mount Agung from the viewpoint of the volcano observatory and other scientists responding to the volcanic crisis. We discuss the volcanic activity as well as key data streams used to track it. We provide evidence that magma intruded into the mid-crust in early 2017, and again in August of that year, prior to intrusion of an inferred dike between Mount Agung and Batur Caldera that initiated an earthquake swarm in late September. We summarize efforts to forecast the behavior of the volcano, to quantify exclusion zones for evacuations, and to work with emergency responders and other government agencies to make decisions during a complex and tense volcanic crisis.

Scientific Reports↗

USGS2019

Gas and ash emissions associated with the 2010–present activity of Sinabung Volcano, Indonesia

Sinabung Volcano (Sumatra, Indonesia) awoke from over 1200 years of dormancy with multiple phreatic explosions in 2010. After a period of quiescence, Sinabung activity resumed in 2013, producing frequent explosions, lava dome extrusion, and pyroclastic flows from dome collapses, becoming one of the world's most active volcanoes and displacing over 20,000 citizens. This study presents a compilation of the geochemical datasets collected by the Indonesian Center for Volcanology and Geological Hazard Mitigation (CVGHM) from 2010 - current (2016), which provides insights into the evolution of the eruption. Based on observations of SO2 emissions, ash componentry, leachate chemistry, and bulk ash geochemistry, the eruption can be split into five distinct phases. The initial stage of phreatic summit explosions occurred from August - October 2010, during which background SO2 emissions averaged ~550 ± 180 t/d (1 s.d.). An eruptive pause (phase two) starting in October 2010 abruptly ended in September 2013 with a resumption of conduit-clearing eruptions. This third phase had a relatively modest background SO2 emission rate (avg. ~410 ± 275 t/d) and produced ash consisting entirely of accidental ejecta with high S/Cl leachate ratios (up to 30), suggestive of deep-sourced magma and the incorporation of hydrothermal sulfur-bearing phases. The most intense phase of the eruption (phase four) occurred from December 2013 to February 2014, when juvenile magma first reached the surface. This period included dozens of large eruptions per day, high SO2 emission rates (average: 1,120 ± 1,030 t/d, peak: ~3,800 t/d), the onset of lava dome extrusion, and a dramatic drop in S/Cl ash leachates to ratios < 5, all reflecting increased degassing from shallow magma and the clearing out of sulfurous phases from the old hydrothermal system. From late February 2014 through the time of writing (September 2016), Sinabung settled into a relatively steady state of lower activity (phase five). Ash emissions now consist of dominantly juvenile material, and background SO2 emission rates have been progressively decreasing to an average of ~250 - 300 t/d. Starting August 2016, SO2 emissions started being measured in a continuous manner using a network of permanent scanning DOAS instruments. We find that long-term SO2 emission rates have been gradually declining at Sinabung since early 2014, consistent with an apparent decrease in magma supply. Our degassing model suggests that large explosions and pyroclastic flows could continue in the near-term owing to conduit plugging and dome collapses, remaining a major threat until the magma supply rate decreases further and the eruption ends.

Sumatra↗

USGS2019

Construction of probabilistic event trees for eruption forecasting at Sinabung volcano, Indonesia 2013–14

Eruptions of Sinabung volcano , Indonesia have been ongoing since 2013. Since that time, the character of eruptions has changed, from phreatic to phreatomagmatic to magmatic explosive eruptions, and from production of a lava dome that collapsed to a subsequent thick lava flow that slowly ceased to be active, and later, to a new lava dome. As the eruption progressed, event trees were constructed to forecast eruptive behavior six times, with forecast windows that ranged from 2 weeks to 1 year: November 7–10, December 12–14, and December 27, 2013; and January 9–10, May 13, and October 7, 2014. These event trees were successful in helping to frame the forecast scenarios, to collate current monitoring information, and to document outstanding questions and unknowns. The highest probability forecasts closely matched outcomes of eruption size (including extrusion of the first dome), production of pyroclastic density currents, and pyroclastic density current runout distances. Events assigned low probabilities also occurred, including total collapse of the lava dome in January 2014 and production of a small blast pyroclastic density current in February 2014.

Sinabung volcano↗

USGS2019

The 2018 rift eruption and summit collapse of Kilauea Volcano

In 2018, Kīlauea Volcano experienced its largest lower East Rift Zone (LERZ) eruption and caldera collapse in at least 200 years. After collapse of the Pu'u 'Ō'ō vent on 30 April, magma propagated downrift. Eruptive fissures opened in the LERZ on 3 May, eventually extending ~6.8 km. A 4 May earthquake (M6.9) produced ~5 m of fault slip. Lava erupted at rates exceeding 100 m3/s, eventually covering 35.5 km2. The summit magma system partially drained, producing minor explosions and near-daily collapses releasing energy equivalent to M4.7-M5.4 earthquakes. Activity declined rapidly on 4 August. Summit collapse and lava flow volume estimates are roughly equivalent--about 0.8 km3. Careful historical observation and monitoring of Kīlauea enabled successful forecasting of hazardous events.

Hawaii↗

USGS2018

Measuring SO2 emission rates at Kīlauea Volcano, Hawaii, using an array of upward-looking UV spectrometers, 2014-2017

Retrieving accurate volcanic sulfur dioxide (SO 2 ) gas emission rates is important for a variety of purposes. It is an indicator of shallow subsurface magma, and thus may signal impending eruption or unrest. SO 2 emission rates are significant for accurately assessing climate impact, and providing context for assessing environmental, agricultural, and human health effects during volcanic eruptions. The U.S. Geological Survey Hawaiian Volcano Observatory uses an array of ten fixed, upward-looking ultraviolet spectrometer systems to measure SO 2 emission rates at 10-s sample intervals from the Kīlauea summit. We present Kīlauea SO 2 emission rates from the volcano’s summit and middle East Rift Zone during 2014–2017 and discuss the major sources of error for these measurements. Due to the wide range of SO 2 emissions encountered at the summit vent, we used a variable wavelength spectral analysis range to accurately quantify both high and low SO 2 column densities. We compare measured emission rates from the fixed spectrometer array to independent road and helicopter-based traverse measurements and evaluate the magnitudes and sources of uncertainties for each method. To address the challenge of obtaining accurate plume speed measurements, we examine ground-based wind-speed, plume speed tracking via spectrometer, and SO 2 camera derived plume speeds. Our analysis shows that: (1) the summit array column densities calculated using a dual fit window, are within -6 to +22% of results obtained with a variety of other conventional and experimental retrieval methods; (2) emission rates calculated from the summit array located ∼3 km downwind provide the best, practical estimate of summit SO 2 release under normal trade wind conditions; (3) ground-based anemometer wind speeds are 22% less than plume speeds determined by cross-correlation of plume features; (4) our best estimate of average Kīlauea SO 2 release for 2014–2017 is 5100 t/d, which is comparable to the space-based OMI emissions of 5518 t/d; and (5) short-term variability of SO 2 emissions reflects Kīlauea lava lake dynamics.

Hawaii↗

USGS2018

Spatial distribution of halogen oxides in the plume of Mount Pagan volcano, Mariana Islands

Halogens are emitted from volcanoes primarily as hydrogen halides (HCl, HF, HBr, and HI). Upon mixing with the atmosphere, chlorine and bromine species are partially converted to the halogen oxides OClO and BrO. Here we report on the spatial distribution of BrO and OClO in the gas plume emitted from Mount Pagan volcano, Northern Mariana Islands. We found enhanced BrO/SO 2 ratios near the plume edges and a lack of OClO in the plume's core. Our results highlight the importance of in‐mixing of atmospheric oxidants for halogen oxide formation. They indicate that OClO can only be formed after most bromide dissolved in plume aerosols has been released to the gas phase. We conclude that Mount Pagan's gas emissions originated from a shallow magma body and were transported to the surface along dry degassing pathways and that the volcano's halogen emissions likely had significant impact on the oxidation capacity of the downwind atmosphere.

Geophysical Research Letters↗

USGS2017

A new sulfur and carbon degassing inventory for the Southern Central American Volcanic Arc: The importance of accurate time-series datasets and possible tectonic processes responsible for temporal variations in arc-scale volatile emissions

This work presents a new database of SO 2 and CO 2 fluxes from the Southern Central American Volcanic Arc (SCAVA) for the period 2015–2016. We report ∼300 SO 2 flux measurements from 10 volcanoes and gas ratios from 11 volcanoes in Costa Rica and Nicaragua representing the most extensive available assessment of this ∼500 km arc segment. The SO 2 flux from SCAVA is estimated at 6,240 ± 1,150 T/d, about a factor of three higher than previous estimations (1972–2013). We attribute this increase in part to our more complete assessment of the arc. Another consideration in interpreting the difference is the context of increased volcanic activity, as there were more eruptions in 2015–2016 than in any period since ∼1980. A potential explanation for increased degassing and volcanic activity is a change in crustal stress regime (from compression to extension, opening volcanic conduits) following two large (Mw > 7) earthquakes in the region in 2012. The CO 2 flux from the arc is estimated at 22,500 ± 4,900 T/d, which is equal to or greater than estimates of C input into the SCAVA subduction zone. Time‐series data sets for arc degassing need to be improved in temporal and spatial coverage to robustly constrain volatile budgets and tectonic controls. Arc volatile budgets are strongly influenced by short‐lived degassing events and arc systems likely display significant short‐term variations in volatile output, calling for expansion of nascent geochemical monitoring networks to achieve spatial and temporal coverage similar to traditional geophysical networks.

Geochemistry, Geophysics, Geosystems↗

USGS2017

The difficulty of measuring the absorption of scattered sunlight by H2O and CO2 in volcanic plumes: A comment on Pering et al. “A novel and inexpensive method for measuring volcanic plume water fluxes at high temporal resolution,” Remote Sens. 2017, 9, 146

In their recent study, Pering et al. (2017) presented a novel method for measuring volcanic water vapor fluxes. Their method is based on imaging volcanic gas and aerosol plumes using a camera sensitive to the near-infrared (NIR) absorption of water vapor. The imaging data are empirically calibrated by comparison with in situ water measurements made within the plumes. Though the presented method may give reasonable results over short time scales, the authors fail to recognize the sensitivity of the technique to light scattering on aerosols within the plume. In fact, the signals measured by Pering et al. are not related to the absorption of NIR radiation by water vapor within the plume. Instead, the measured signals are most likely caused by a change in the effective light path of the detected radiation through the atmospheric background water vapor column. Therefore, their method is actually based on establishing an empirical relationship between in-plume scattering efficiency and plume water content. Since this relationship is sensitive to plume aerosol abundance and numerous environmental factors, the method will only yield accurate results if it is calibrated very frequently using other measurement techniques.

Remote Sensing↗

USGS2017

Remote measurement of high preeruptive water vapor emissions at Sabancaya volcano by passive differential optical absorption spectroscopy

Water (H 2 O) is by far the most abundant volcanic volatile species and plays a predominant role in driving volcanic eruptions. However, numerous difficulties associated with making accurate measurements of water vapor in volcanic plumes have limited their use as a diagnostic tool. Here we present the first detection of water vapor in a volcanic plume using passive visible-light differential optical absorption spectroscopy (DOAS). Ultraviolet and visible-light DOAS measurements were made on 21 May 2016 at Sabancaya Volcano, Peru. We find that Sabancaya's plume contained an exceptionally high relative water vapor abundance 6 months prior to its November 2016 eruption. Our measurements yielded average sulfur dioxide (SO 2 ) emission rates of 800–900 t/d, H 2 O emission rates of around 250,000 t/d, and an H 2 O/SO 2 molecular ratio of 1000 which is about an order of magnitude larger than typically found in high-temperature volcanic gases. We attribute the high water vapor emissions to a boiling-off of Sabancaya's hydrothermal system caused by intrusion of magma to shallow depths. This hypothesis is supported by a significant increase in the thermal output of the volcanic edifice detected in infrared satellite imagery leading up to and after our measurements. Though the measurement conditions encountered at Sabancaya were very favorable for our experiment, we show that visible-light DOAS systems could be used to measure water vapor emissions at numerous other high-elevation volcanoes. Such measurements would provide observatories with additional information particularly useful for forecasting eruptions at volcanoes harboring significant hydrothermal systems.

Journal of Geophysical Research B: Solid Earth↗

USGS2017

Magmatic degassing, lava dome extrusion, and explosions from Mount Cleveland volcano, Alaska, 2011–2015: Insight into the continuous nature of volcanic activity over multi-year timescales

Mount Cleveland volcano (1730 m) is one of the most active volcanoes in the Aleutian arc, Alaska, but heightened activity is rarely accompanied by geophysical signals, which makes interpretation of the activity difficult. In this study, we combine volcanic gas emissions measured for the first time in August 2015 with longer-term measurements of thermal output and lava extrusion rates between 2011 and 2015 calculated from MODIS satellite data with the aim to develop a better understanding of the nature of volcanic activity at Mount Cleveland. Degassing measurements were made in the month following two explosive events (21 July and 7 August 2015) and during a period of new dome growth in the summit crater. SO 2 emission rates ranged from 400 to 860 t d − 1 and CO 2 /SO 2 ratios were < 3, consistent with the presence of shallow magma in the conduit and the observed growth of a new lava dome. Thermal anomalies derived from MODIS data from 2011 to 2015 had an average repose time of only 4 days, pointing to the continuous nature of volcanic activity at this volcano. Rapid increases in the cumulative thermal output were often coincident with visual confirmation of dome growth or accumulations of tephra in the crater. The average rate of lava extrusion calculated for 9 periods of rapid increase in thermal output was 0.28 m 3 s − 1 , and the total volume extruded from 2011 to 2015 was 1.9–5.8 Mm 3 . The thermal output from the lava extrusion events only accounts for roughly half of the thermal budget, suggesting a continued presence of shallow magma in the upper conduit, likely driven by convection. Axisymmetric dome morphology and occasional drain back of lava into the conduit suggests low-viscosity magmas drive volcanism at Mount Cleveland. It follows also that only small overpressures can be maintained given the small domes and fluid magmas, which is consistent with the low explosivity of most of Mount Cleveland's eruptions. Changes between phases of dome growth and explosive activity are somewhat unpredictable and likely result from plugs that are related to the dome obtaining a critical dimension, or from small variations in the magma ascent rate that lead to crystallization-induced blockages in the upper conduit, thereby reducing the ability of magma to degas. We suggest the small magma volumes, slow ascent rates, and low magma viscosity lead to the overall lack of anomalous geophysical signals prior to eruptions, and that more continuous volcanic degassing measurements might lead to more successful eruption forecasting at this continuously-active open-vent volcano.

Alaska↗

USGS2016

The 2014 annual report for the Hawaiian Volcano Observatory

Introduction This report summarizes team activities and findings of the Hawaiian Volcano Observatory during the year 2014 in geology, geodesy, seismicity, and gas geochemistry. The eruption of Pu‘u ‘Ō‘ō continued into its 32nd year with flows active to the northeast of the vent. One of them, the June 27th lava flow, named for the date in 2014 that the flow started, advanced far and fast enough to threaten the town of Pāhoa and Highway 130 in the Puna District of the Island of Hawai‘i. In response, the alert level for Kīlauea was elevated from WATCH to WARNING on September 4, followed by the declaration of a State Disaster on September 5 and a National Disaster on November 3. During 2014, renewed inflation and increased seismicity was detected beneath the summit and upper west flank of Mauna Loa. Although above background, the frequency and magnitude of the earthquakes remained at such low levels that, by year’s end, the four-tier alert level code for Mauna Loa remained at its lowest level—NORMAL. These changes were discussed in several Volcano Watch articles. Hualālai, Haleakalā, Mauna Kea, and Lo‘īhi showed no signs of unrest during the year.

Scientific Investigations Report↗

USGS2016

An interface for simulating radiative transfer in and around volcanic plumes with the Monte Carlo radiative transfer model McArtim

This report describes two software tools that, when used as front ends for the three-dimensional backward Monte Carlo atmospheric-radiative-transfer model (RTM) McArtim, facilitate the generation of lookup tables of volcanic-plume optical-transmittance characteristics in the ultraviolet/visible-spectral region. In particular, the differential optical depth and derivatives thereof (that is, weighting functions), with regard to a change in SO 2 column density or aerosol optical thickness, can be simulated for a specific measurement geometry and a representative range of plume conditions. These tables are required for the retrieval of SO 2 column density in volcanic plumes, using the simulated radiative-transfer/differential optical-absorption spectroscopic (SRT-DOAS) approach outlined by Kern and others (2012). This report, together with the software tools published online, is intended to make this sophisticated SRT-DOAS technique available to volcanologists and gas geochemists in an operational environment, without the need for an indepth treatment of the underlying principles or the low-level interface of the RTM McArtim.

Open-File Report↗

USGS2016

Long period seismicity and very long period infrasound driven by shallow magmatic degassing at Mount Pagan, Mariana Islands

Long period (LP) seismicity and very long period infrasound (iVLP) were recorded during continuous degassing from Mount Pagan, Mariana Islands, in July 2013 to January 2014. The frequency content of the LP and iVLP events and delay times between the two arrivals were remarkably stable and indicate nearly co-located sources. Using phase-weighted stacking over similar events to dampen noise, we find that the LP source centroid is located 60 m below and 180 m west of the summit vent. The moment tensor reveals a volumetric source modeled as resonance of a subhorizontal sill intersecting a dike. We model the seismoacoustic wavefields with a coupled earth-air 3-D finite difference code. The ratios of pressure to velocity measured at the infrasound arrays are an order of magnitude larger than the synthetic ratios, so the iVLP is not the result of LP energy transmitting into the atmosphere at its epicenter. Based on crater shape and dimensions determined by structure from motion, we model the iVLP as acoustic resonance of an exponential horn. The source of the continuous plume from gas analysis is shallow magmatic degassing, which repeatedly pressurized the dike-sill portion of the conduit over the 7 months of observation. Periodic gas release caused the geologically controlled sill to partially collapse and resonate, while venting of gas at the surface triggered resonance in the crater. LP degassing only accounts for ~12% of total degassing, indicating that most degassing is relatively aseismic and that multiple active pathways exist beneath the vent.

Mount Pagan↗