Geology Reports⌕ Search

Geology topics

Byron R. Berger

Publications and source records attributed to Byron R. Berger.

30 records · Page 2Linked to original sources
USGS2004

Assessment of metallic mineral resources in the Humboldt River Basin, Northern Nevada, with a section on Platinum-Group-Element (PGE) potential of the Humboldt mafic complex

The Humboldt River Basin is an arid to semiarid, internally drained basin that covers approximately 43,000 km2 in northern Nevada. The basin contains a wide variety of metallic and nonmetallic mineral deposits and occurrences, and, at various times, the area has been one of the Nation's leading or important producers of gold, silver, copper, mercury, and tungsten. Nevada currently (2003) is the third largest producer of gold in the world and the largest producer of silver in the United States. Current exploration for additional mineral deposits focuses on many areas in northern Nevada, including the Humboldt River Basin.

Nevada↗
USGS2003

Environmental controls on water quality: Case studies from Battle Mountain mining district, north-central Nevada

The environmental controls on water quality were the focus of our study in a portion of the Battle Mountain mining district, north-central Nevada. Samples representing areas outside known mineralized areas, in undisturbed mineralized areas, and in mined areas were chemically and isotopically analyzed. The results are related to geologic, hydrologic, and climatic data. Streams in background areas outside the mineralized zones reflect normal weathering of volcanically derived rocks. The waters are generally dilute, slightly alkaline in pH, and very low in metals. As these streams flow into mineralized zones, their character changes. In undisturbed mineralized areas, discharge into streams of ground water through hydrologically conductive fractures can be traced with chemistry and, even more effectively, with sulfur isotopic composition of dissolved sulfate. Generally, these tracers are much more subtle than in those areas where mining has produced adits and mine-waste piles. The influence of drainage from these mining relicts on water quality is often dramatic, especially in unusually wet conditions. In one heavily mined area, we were able to show that the unusually wet weather in the winter and spring greatly degraded water quality. Addition of calcite to the acid, metalrich mine drainage raised the stream pH and nearly quantitatively removed the metals through coprecipitation and (or) adsorption onto oxyhydroxides. This paper is divided into four case studies used to demonstrate our results. Each addresses the role of geology, hydrology, mining activity and (or) local climate on water quality. Collectively, they provide a comprehensive look at the important factors affecting water quality in this portion of the Battle Mountain mining district.

Nevada↗
USGS2001

Results of chemical and stable isotopic analyses of water samples collected in the Patagonia Mountains, southern Arizona

Water samples were collected in the Patagonia Mountains in February, 1997. Most of the samples were collected from portals of abandoned mines, or from stream drainages immediately downstream from abandoned mines. Most of the samples have low pH (<4) and high total dissolved solids (> 1000 mg/L). Anion composition of the water samples is dominated by sulfate, while cation compositions range from calcium-dominated to mixed calcium-magnesium or calcium-sodium-dominated waters. Metals such as iron, manganese, copper, zinc, and aluminum contribute a significant portion (>10%) of the cation content to the water samples. Because of the low pH?s, protons contribute up to several percent of the cation character of the waters in some of the samples. The data are presented in tabular and graphical formats, with descriptions of data quality and brief descriptions of results.

Open-File Report↗
USGS2000

Self-ordering and complexity in epizonal mineral deposits

Epizonal base and precious metal deposits makeup a range of familiar deposit styles including porphyry copper-gold, epithermal veins and stockworks, carbonate-replacement deposits, and polymetallic volcanic rock-hosted (VHMS) deposits. They occur along convergent plate margins and are invariably associated directly with active faults and volcanism. They are complex in form, variable in their characteristics at all scales, and highly localized in the earth’s crust. More than a century of detailed research has provided an extensive base of observational data characterizing these deposits, from their regional setting to the fluid and isotope chemistry of mineral deposition. This has led to a broad understanding of the large-scale hydrothermal systems within which they form. Low salinity vapor, released by magma crystallization and dispersed into vigorously convecting groundwater systems, is recognized as a principal source of metals and the gases that control redox conditions within systems. The temperature and pressure of the ambient fluid anywhere within these systems is close to its vapor-liquid phase boundary, and mineral deposition is a consequence of short timescale perturbations generated by localized release of crustal stress. However, a review of occurrence data raises questions about ore formation that are not addressed by traditional genetic models. For example, what are the origins of banding in epithermal veins, and what controls the frequency of oscillatory lamination? What controls where the phenomenon of mineralization occurs, and why are some porphyry deposits, for example, so much larger than others? The distinctive, self-organized characteristics of epizonal deposits are shown to be the result of repetitive coupling of fracture dilation consequent on brittle failure, phase separation (“boiling”), and heat transfer between fluid and host rock. Process coupling substantially increases solute concentrations and triggers fast, far-from-equilibrium depositional processes. Since these coupled processes lead to localized transient changes in fluid characteristics, paragenetic, isotope, and fluid inclusion data relate to conditions at the site of deposition and only indirectly to the characteristics of the larger-scale hydrothermal system and its longer-term behavior. The metal concentrations (i.e. grade) of deposits and their internal variation is directly related to the geometry of the fracture array at the deposit scale, whereas finer-scale oscillatory fabrics in ores may be a result of molecular scale processes. Giant deposits are relatively rare and develop where efficient metal deposition is spatially focused by repetitive brittle failure in active fault arrays. Some brief case histories are provided for epithermal, replacement, and porphyry mineralization. These highlight how rock competency contrasts and feedback between processes, rather than any single component of a hydrothermal system, govern the size of individual deposits. In turn, the recognition of the probabilistic nature of mineralization provides a firmer foundation through which exploration investment and risk management decisions can be made.

Annual Review of Earth and Planetary Sciences↗
USGS1999

Environmental models of mineral deposits- A state of the art

Although mineral deposits have been classified by their geologic and mineralogical characteristics for decades, the recognition that mineral deposits also could be classified by their environmental characteristics is relatively new. In the past 5 years, numerous advancements have been made in this subject area, building on the earlier work of economic geologists who classified geologic characteristics. Several different approaches to understanding the environmental behavior of mineral deposits and associated altered areas have been taken, ranging from wholesale assessments of large areas (millions of km 2 ) to detailed assessments of individual watersheds or individual mines. While these first attempts have succeeded in describing some of the environmental characteristics of ore deposits in a number of ways, many important “environmental variables” are not included in present descriptive models. For example, the models should be expanded in scope to include a more thorough treatment of climatic and ecoregional effects- embodying such physical environmental characteristics as precipitation, evaporation, temperature, and ground water-surface water interactions. More complete model descriptions will have applications to the determination of baselines and natural backgrounds in mined and unmined areas, as well as possible anticipated effects of new mining in a given area, and mitigation and remediation strategies. The challenge to geologists and geochemists is to incorporate a widely disparate set of physical and chemical characteristics of mineralized and altered zones at scales ranging from microscopic (sub-millimeter) to macroscopic (10’s to 100’s of kilometers). This paper presents an overview of the development of mineral deposit environmental models, the current state of the art, an evaluation of needed improvements, and expected advancements in this field.

Geologica Hungarica. Series geologica↗
USGS1985

Geologic characteristics of sediment- and volcanic-hosted disseminated gold deposits - Search for an occurrence model

The current expansion of resource information, particularly on "disseminated" gold, and the improved technologies now available for resource investigations should place us in an enhanced position for developing a better predictive methodology for meeting one of the important responsibilities of the U.S. Geological Survey-to examine and assess the mineral resources of the geologic terranes composing the public (and privately owned) lands of the United States. The first step is systematic organization of these data. Geologic-occurrence models are an effective systematic method by which to organize large amounts of resource information into a logical sequence facilitating its use more effectively in meeting several industry and Survey objectives, which include the exploration for resources and the assessment of resource potential for land-use decisions. Such models also provide a scientific basis for metallogenesis research, which considers the observable features or attributes of ore occurrence and their "fit" into the Earth's resource puzzle. The use of models in making resource assessments/appraisals was addressed by Shawe (1981), who reported the results of a workshop on methods for resource appraisal of Wilderness and Conterminous United States Mineral Appraisal Program (CUSMAP; 1:250,000-scale quadrangles) areas. The Survey's main objective in the 1982 workshop was to evaluate the status of knowledge about disseminated or very fine grained gold deposits and, if possible, to develop an occurrence model(s). This report on the workshop proceedings has three main objectives: (1) Education through the publication of a summary review and presentation of new thinking and observations about the scientific bases for those geologic processes and environments that foster disseminated gold-ore formation; (2) systematic organization of available geologic, geochemical, and geophysical information for a range of typical disseminated gold deposits (including recognition of gaps in those data); and (3) assessment of current understanding (as presented in objective 2) toward formulating an empirical ore-occurrence model for this type of deposit. As such, this volume represents a preliminary first step at classification and provides a source of pertinent background information. Readers of this volume will soon discover, however, that full agreement has not yet been achieved in the interpretation of some of the geologic evidence. The resulting variations in tentative occurrence models for these controversial deposits ultimately will be resolved by filling the gaps in information that have already been identified. Thus, this volume does not report a U.S. Geological Survey consensus; the conclusions expressed in each chapter represent the particular interpretations of the various workshop participants.

Arizona, California, Idaho, Nevada, Utah↗