Geology topics

Byron R. Berger

Publications and source records attributed to Byron R. Berger.

At least 19 recordsLinked to original sources

USGS2017

Antimony

Antimony is an important mineral commodity used widely in modern industrialized societies. The element imparts strength, hardness, and corrosion resistance to alloys that are used in many areas of industry, including in lead-acid storage batteries. Antimony’s leading use is as a fire retardant in safety equipment and in household goods, such as mattresses. The U.S. Government has considered antimony to be a critical mineral mainly because of its use in military applications. The great majority of the world’s antimony comes from China, and much of the remainder is shipped to China for smelting. Antimony resources are unevenly distributed around the world. China has the bulk of the world’s identified resources; other countries that have identified antimony resources include Bolivia, Canada, Mexico, Russia, South Africa, Tajikistan, and Turkey. Resources in the United States are located mainly in Alaska, Idaho, Montana, and Nevada. The most significant antimony mineral deposits occur in geologic environments with a thick sequence of siliciclastic sedimentary rocks in areas with significant fault and fracture systems. The most common antimony ore mineral is stibnite (Sb2 S3 ), but more than 100 other minerals also contain antimony. The presence of antimony in surface waters and groundwaters results primarily from rock weathering, soil runoff, and anthropogenic sources. Global emissions of antimony to the atmosphere average 6,100 metric tons per year. Empirical data suggest that the acid-generating potential of antimony mine waste is low.

Professional Paper↗

USGS2017

Tellurium

Tellurium (Te) is a very rare element that averages only 3 parts per billion in Earth’s upper crust. It shows a close association with gold and may be present in orebodies of most gold deposit types at levels of tens to hundreds of parts per million. In large-tonnage mineral deposits, such as porphyry copper and seafloor volcanogenic massive sulfide deposits, sulfide minerals may contain hundreds of parts per million tellurium, although the orebodies likely have overall concentrations of 0.1 to 1.0 parts per million tellurium. Tellurium is presently recovered as a primary ore from only two districts in the world; these are the gold-tellurium epithermal vein deposits located adjacent to one another at Dashuigou and Majiagou (Sichuan Province) in southwestern China, and the epithermal-like mineralization at the Kankberg deposit in the Skellefteå VMS district of Västerbotten County, Sweden. Combined, these two groups of deposits account for about 15 percent (about 70 metric tons) of the annual global production of between 450 and 470 metric tons of tellurium. Most of the world’s tellurium, however, is produced as a byproduct of the mining of porphyry copper deposits. These deposits typically yield concentrations of 1 to 4 percent tellurium in the anode slimes recovered during copper refining. Present production of tellurium from the United States is solely from the anode slimes at ASARCO LLC’s copper refinery in Amarillo, Texas, and may total about 50 metric tons per year. The main uses of tellurium are in photovoltaic solar cells and as an additive to copper, lead, and steel alloys in various types of machinery. The environmental data available regarding the mining of tellurium are limited; most concerns to date have focused on the more-abundant metals present in the large-tonnage deposits from which tellurium is recovered as a byproduct. Global reserves of tellurium are estimated to be 24,000 metric tons, based on the amount of tellurium likely contained in global copper reserves and on a 50 percent recovery rate from refinery anode slimes during the commonly used electrolytic process, also known as solvent extraction-electrolytic refining. If the more economical solvent-leach process—a process that does not recover tellurium—is increasingly used in the future to recover lower grades of copper from porphyry and other large-tonnage deposits, then additional high-grade tellurium-rich gold deposits may become new primary sources for tellurium, particularly epithermal vein deposits associated with alkaline magmatism.

Professional Paper↗

USGS2017

Undiscovered porphyry copper resources in the Urals—A probabilistic mineral resource assessment

A probabilistic mineral resource assessment of metal resources in undiscovered porphyry copper deposits of the Ural Mountains in Russia and Kazakhstan was done using a quantitative form of mineral resource assessment. Permissive tracts were delineated on the basis of mapped and inferred subsurface distributions of igneous rocks assigned to tectonic zones that include magmatic arcs where the occurrence of porphyry copper deposits within 1 km of the Earth's surface are possible. These permissive tracts outline four north-south trending volcano-plutonic belts in major structural zones of the Urals. From west to east, these include permissive lithologies for porphyry copper deposits associated with Paleozoic subduction-related island-arc complexes preserved in the Tagil and Magnitogorsk arcs, Paleozoic island-arc fragments and associated tonalite-granodiorite intrusions in the East Uralian zone, and Carboniferous continental-margin arcs developed on the Kazakh craton in the Transuralian zone. The tracts range from about 50,000 to 130,000 km 2 in area. The Urals host 8 known porphyry copper deposits with total identified resources of about 6.4 million metric tons of copper, at least 20 additional porphyry copper prospect areas, and numerous copper-bearing skarns and copper occurrences. Probabilistic estimates predict a mean of 22 undiscovered porphyry copper deposits within the four permissive tracts delineated in the Urals. Combining estimates with established grade and tonnage models predicts a mean of 82 million metric tons of undiscovered copper. Application of an economic filter suggests that about half of that amount could be economically recoverable based on assumed depth distributions, availability of infrastructure, recovery rates, current metals prices, and investment environment.

Urals↗

USGS2015

Porphyry copper assessment of the Tethys region of western and southern Asia: Chapter V in Global mineral resource assessment

A probabilistic mineral resource assessment of undiscovered resources in porphyry copper deposits in the Tethys region of western and southern Asia was carried out as part of a global mineral resource assessment led by the U.S. Geological Survey (USGS). The purpose of the study was to delineate geographic areas as permissive tracts for the occurrence of porphyry copper deposits at a scale of 1:1,000,000 and to provide probabilistic estimates of amounts of copper likely to be contained in undiscovered porphyry copper deposits in those tracts. The team did the assessment using the USGS three-part form of mineral resource assessment, which is based on (1) mineral deposit and grade-tonnage models constructed from known deposits as analogs for undiscovered deposits, (2) delineation of permissive tracts based on geoscientific information, and (3) estimation of numbers of undiscovered deposits. The assessment area includes the Asian part of Turkey and Georgia, Armenia, Azerbaijan, Iran, western Pakistan, and southwestern Afghanistan. Selected tracts also extend marginally into southwesternmost Russia and northeasternmost Iraq. This region is located in the central part of the larger Tethyan Eurasian Metallogenic Belt, which extends from western Europe to eastern Asia. Mining in this part of the Tethyan Eurasian Metallogenic Belt has occurred for thousands of years; in 2011 the region produced 420,000 metric tons (t) of copper (2.6 percent of global production), 8,300 t of molybdenum (3 percent), and 29,600 kilograms of gold (1 percent). The assessment team defined 26 tracts permissive for Late Triassic to Holocene porphyry copper-molybdenum and porphyry copper-gold deposits. Permissive tracts range in extent from 2,960 to 194,000 square kilometers (km 2 ) and cover a total area of 924,000 km 2 . Younger tracts overlap older tracts in several areas. Three permissive tracts include sub-tracts in order to separate tract segments on the basis of geography, data quality, or likelihood of occurrence of undiscovered deposits. About 65 percent of all known porphyry sites occur in only five tracts, which also host most of the identified copper resources. In terms of tectonic setting, 58 percent of the permissive tracts are related to continental arcs; 19 percent to island arcs or back arcs; and 24 percent to postcollisional settings. Of the known porphyry copper deposits, subequal fractions are spread among these three settings. The spatial distribution of known porphyry deposits and prospects is also related to the level of erosion. Magmatic belts with numerous known porphyry sites exhibit subequal areas of coeval plutonic and volcanic units and lesser amounts of cover rocks. Belts with fewer known porphyry sites display either high or low volcanic-to-plutonic ratios and (or) greater cover, indicating crustal levels that are too shallow or too deep for exposure of porphyry deposits. Probabilistic estimates of numbers of undiscovered porphyry copper deposits were made for 18 of the 26 tracts. The undiscovered porphyry copper endowment for 8 tracts is discussed qualitatively. The assessment estimates that the Tethys region contains 47 undiscovered deposits within 1 kilometer of the surface. Probabilistic estimates of numbers of undiscovered deposits were combined with grade and tonnage models in a Monte Carlo simulation to estimate probable amounts of contained metal. The 47 undiscovered deposits are estimated to contain a mean of 180 million metric tons (Mt) of copper distributed among the 18 tracts for which probabilistic estimates were made, in addition to the 62 Mt of copper already identified in the 42 known porphyry deposits in the study area. Results of Monte Carlo simulations show that 80 percent of the estimated undiscovered porphyry copper resources in the Tethys region are located in four tracts or sub-tracts.

Scientific Investigations Report↗

USGS2014

The Lepanto Cu–Au deposit, Philippines: A fossil hyperacidic volcanic lake complex

Hyperacidic lakes and associated solfatara in active volcanoes are the expression of magmatic gas expansion from source to surface. Here we show for the first time, that the vein system that comprises the ~ 2 Ma high-sulfidation, Lepanto copper–gold deposit in the Mankayan district (Philippines) was associated with a contemporary hyperacidic volcanic lake complex—possibly the first such lake recognized in the geological record. A 15–20‰ difference in sulfur isotopic composition between barite and sulfides and sulfosalts in the vent fumarole encrustations supports the interpretation that SO 2 -rich volcanic gas vented into the base of the lake and marginal to it and ties the mineralization directly to magmatic gas expansion, fracture propagation, and mineralization that occurred through a series of decompression steps within the feeder fracture network. These data confirm that crater lake environments such as Kawah Ijen (Java, Indonesia) provide modern day analogs of the Lepanto and other high sulfidation Cu–Au depositing environments. We also provide extensive analysis of sulfosalt–sulfide reactions during vein formation within the hyperacidic lake complex. Pyrite ± silica deposited first at high temperature followed by enargite that preserves the vapor–solid diffusion of, for example, antimony, tin, and tellurium into the vapor from the crystallizing solid. Subsolidus, intra-crystalline diffusion continued as temperature declined. Pyrite and enargite are replaced by Fe-tennantite in the lodes which initially has low Sb/(Sb + As) atomic ratios around 13.5% close to the ideal tennantite formula, but evolves to higher ratios as crystallization proceeds. Fumarole encrustation clasts and sulfosalts in the lake sediment are more highly evolved with a larger range of trace element substitutions, including antimony. Substitution of especially Zn, Te, Ag, and Sn into tennantite records metal and semi-metal fractionation between the expanding magmatic gas and deposited sulfide sublimates provides a rare insight into the fate of metals and semi-metals in the shallower parts of fracture arrays that feed modern hyperacidic lakes. These data support a growing understanding of the formation of high-sulfidation gold deposits as the consequence of single-phase expansion of gas from magmatic-gas reservoirs beneath the surface of active volcanoes without the intervention of a later aqueous fluid including groundwater. Aggressive sulfide–sulfosalt reactions, including pitting and the almost complete dissolution of earlier minerals, are persistent characteristics of the vein assemblages and precious metals typically occur late in pits or along brittle fractures. These characteristics support a hypothesis of mineral deposition at temperatures of the order of 600 °C in contrast to available fluid inclusion data from enargite that record temperatures following phase transitions in the sulfosalt during the retrograde devolution of the deposit in the presence of groundwater.

Benguet↗

USGS2014

Petrology and chemistry of the Green Acres gabbro complex near Winchester, Riverside County, California

The Cretaceous Green Acres layered igneous complex, northeast of Winchester, California, is composed of a suite of olivine- and hornblende-bearing gabbros in the Peninsular Ranges batholith within the Perris tectonic block. A consistent mineral assemblage is observed throughout the complex, but there is considerable textural and modal heterogeneity. Both preclude a consistent set of principles based on appearance and mineralogy on which to delineate map units. Distinct changes in the chemistry of olivine, pyroxene, and hornblende, however, serve to define discrete mappable units, and the complex has been divided into five geochemical map units on this basis. Limited whole-rock data show the Green Acres complex is chemically comparable to other Peninsular Ranges batholith gabbroic rocks, and rare earth element (REE) concentrations and patterns are typical of magmas generated in convergent margin settings. For the complex as a whole, olivine is Fo 80–35 , plagioclase is An 100–64 , clinopyroxene is Wo 49–41 En 48–38 Fs 18–6 and Wo 36–26 En 65–42 Fs 30–8 , and orthopyroxene is Wo 5–0 En 78–42 Fs 50–21 , where Fo is forsterite, An is anorthite, Wo is wollastonite, En is enstatite, and Fs is ferrosilite. The Mg/(Mg + ΣFe) atomic ratio in hornblende ranges from 0.84 to 0.50. Magmatic lineations and modal and textural layering are prevalent throughout the complex. Mineral chemistry does not change in any systematic way within and between layers in any map unit. Although the strike of layering varies, in any map unit at any given location it is the same in all units irrespective of intrusive order. Thin dikes, typically late-stage hornblende gabbro, commonly intrude parallel to layering. The strikes of magmatic lineations and modal layers are consistent with the populations of strikes of fabrics in the metamorphic basement as well as tectonic features in surrounding, postgabbro granitic rocks. These relations imply that the regional state of stress at the time of gabbro emplacement played a role in layer formation in conjunction with thermal and hydraulic pressure perturbations.

California↗

USGS2014

Characterization of potential mineralization in Afghanistan: four permissive areas identified using imaging spectroscopy data

As part of the U.S. Geological Survey and Department of Defense Task Force for Business and Stability Operations natural resources revitalization activities in Afghanistan, four permissive areas for mineralization, Bamyan 1, Farah 1, Ghazni 1, and Ghazni 2, have been identified using imaging spectroscopy data. To support economic development, the areas of potential mineralization were selected on the occurrence of selected mineral assemblages mapped using the HyMap™ data (kaolinite, jarosite, hydrated silica, chlorite, epidote, iron-bearing carbonate, buddingtonite, dickite, and alunite) that may be indicative of past mineralization processes in areas with limited or no previous mineral resource studies. Approximately 30 sites were initially determined to be candidates for areas of potential mineralization. Additional criteria and material used to refine the selection and prioritization process included existing geologic maps, Landsat Thematic Mapper data, and published literature. The HyMapTM data were interpreted in the context of the regional geologic and tectonic setting and used the presence of alteration mineral assemblages to identify areas with the potential for undiscovered mineral resources. Further field-sampling, mapping, and supporting geochemical analyses are necessary to fully substantiate and verify the specific deposit types in the four areas of potential mineralization.

Bamyan;Farah;Ghazni↗

USGS2014

Porphyry copper assessment of western Central Asia

The U.S. Geological Survey conducted an assessment of resources associated with porphyry copper deposits in the western Central Asia countries of Kyrgyzstan, Uzbekistan, Kazakhstan, and Tajikistan and the southern Urals of Kazakhstan and Russia as part of a global mineral resource assessment. The purpose of the study was to (1) delineate permissive areas (tracts) for undiscovered porphyry copper deposits; (2) compile a database of known porphyry copper deposits and significant prospects; (3) where data permit, estimate numbers of undiscovered deposits within those permissive tracts; and (4) provide probabilistic estimates the amounts of copper (Cu), molybdenum (Mo), gold (Au), and silver (Ag) that could be contained in those undiscovered deposits. Western Central Asia, a region diverse in its geologic complexity, is situated north of the Tarim and North China tectonic blocks and sandwiched between the East European and Siberian cratons. The Ural Mountains form the western margin of the region; the southern margin is formed by the high-standing ranges that make up the Tian Shan mountain range in the border regions of Kazakhstan, Kyrgyzstan, and western China, where the effects of collisional tectonics are well displayed. The tectonic collage that makes up the core of western Central Asia is perhaps the geologically least understood part of the region. There is broad agreement that the early Paleozoic is made up of tectonically juxtaposed blocks that vary from Precambrian-cored microcontinents to magmatic arc and related complexes to subduction-related accretionary complexes. The rudiments of an incipient, contiguous single Kazakhstan block were formed by the end of the Silurian. In the middle to late Paleozoic, the block was unconformably superposed by two large, nested magmatic-arc belts, one Devonian, the other Carboniferous. Both magmatic-arc complexes were folded into a horseshoe-shaped, southeast-opening orocline in response to the final collisions of the various surrounding cratonic blocks with the Kazakhstan block. Additional deformation in the upper Cenozoic derived from the collision of India and China significantly redistributed fragments of the various mosaicked blocks, particularly in the central and southern parts of the western Central Asian region. Porphyry copper deposits are associated with many of the magmatic-arc fragments and belts throughout the geologically complex region, and economically important deposits are found in arc sequences of all Paleozoic Periods. The economically most productive arcs are Carboniferous. The assessment includes a discussion of the tectonic and geologic setting of porphyry copper deposits in western Central Asia (chapter 1), an application of remote sensing data for hydrothermal alteration mapping as a tool for porphyry copper assessment in the region (chapter 2), and a probabilistic assessment of undiscovered porphyry copper resources in four areas that represent Ordovician and Late Paleozoic (Carboniferous-Permian) magmatic arcs (chapter 3). The principal litho-tectonic terrane concept used to delineate permissive tracts was that of a magmatic arc that formed in the subduction boundary zone above a subducting plate. Eight permissive tracts are delineated on the basis of mapped and inferred subsurface distributions of igneous rocks assigned to magmatic arcs of specified age ranges that define areas where the occurrence of porphyry copper deposits within 1 kilometer of the Earth’s surface is possible. These tracts range in area from about 8,000 to 200,000 square kilometers and host 18 known porphyry copper deposits that contain about 54 million metric tons of copper. Available data included geologic maps, the distribution of significant porphyry copper occurrences and potentially related deposit types, the distribution of hydrothermal alteration patterns that are consistent with porphyry copper mineralization, and information on possible subsurface extensions of permissive rocks. On the basis of analyses of these data, the assessment team estimated a mean of 25 undiscovered porphyry copper deposits for the study area. Estimates of numbers of undiscovered deposits were combined with grade and tonnage models in a Monte Carlo simulation to yield a mean estimate of 95 million metric tons of copper in undiscovered porphyry copper deposits; this represents about twice the amount of identified porphyry copper resources (54 million metric tons). Detailed descriptions of each permissive tract, including the rationales for delineation and assessment, are given in appendixes, along with a geographic information system (GIS) that includes permissive tract boundaries, point locations of known porphyry copper deposits and significant occurrences, and hydrothermal alteration data based on analysis of remote sensing data.

Ural Mountains↗

USGS2013

A framework for quantitative assessment of impacts related to energy and mineral resource development

Natural resource planning at all scales demands methods for assessing the impacts of resource development and use, and in particular it requires standardized methods that yield robust and unbiased results. Building from existing probabilistic methods for assessing the volumes of energy and mineral resources, we provide an algorithm for consistent, reproducible, quantitative assessment of resource development impacts. The approach combines probabilistic input data with Monte Carlo statistical methods to determine probabilistic outputs that convey the uncertainties inherent in the data. For example, one can utilize our algorithm to combine data from a natural gas resource assessment with maps of sage grouse leks and piñon-juniper woodlands in the same area to estimate possible future habitat impacts due to possible future gas development. As another example: one could combine geochemical data and maps of lynx habitat with data from a mineral deposit assessment in the same area to determine possible future mining impacts on water resources and lynx habitat. The approach can be applied to a broad range of positive and negative resource development impacts, such as water quantity or quality, economic benefits, or air quality, limited only by the availability of necessary input data and quantified relationships among geologic resources, development alternatives, and impacts. The framework enables quantitative evaluation of the trade-offs inherent in resource management decision-making, including cumulative impacts, to address societal concerns and policy aspects of resource development.

Natural Resources Research↗

USGS2013

Nature's refineries — Metals and metalloids in arc volcanoes

Chemical data for fumaroles and for atmospheric gas and ash plumes from active arc volcanoes provide glimpses of the rates of release of metal and metalloids, such as Tl and Cd, from shallow and mid-crust magmas. Data from copper deposits formed in ancient volcanoes at depths of up to about 1500 m in the fractures below paleo-fumaroles, and at around 2000–4000 m in association with sub-volcanic intrusions (porphyry copper deposits) provide evidence of sub-surface deposition of Cu–Au–Ag–Mo and a range of other minor elements including Te, Se, As and Sb. These deposits, or ‘sinks’, of metals consistently record sustained histories of magmatic gas streaming through volcanic systems interspersed by continuing intrusive and eruptive activity. Here we integrate data from ancient and modern volcanic systems and show that the fluxes of metals and metalloids are controlled by a) the maintenance of fracture permeability in the stressed crust below volcanoes and b) the chemical processes that are triggered as magmatic gas, initially undersaturated with metals and metalloids, expands from lithostatic to very low pressure conditions through fracture arrays. The recognition of gas streaming may also account for the phenomenon of ‘excess degassing’, and defines an integral, but generally understated, component of active volcanic systems – a volcanic gas core – that is likely to be integral to the progression of eruptions to Plinean state. Destabilization of solvated molecular metal and metalloid species in magmatic gas mixtures and changes in their redox state are triggered, as it expands to the surface by abrupt pressure drops, or throttles' in the fracture array that guides expansion to the surface. The electronically harder, low electronegativity metals, such as copper and iron, deposit rapidly in response to expansion followed more slowly by arsenic with antimony as sulfosalts. Heavy, large radius, softer elements such as bismuth, lead, and thallium along with cadmium are strongly fractionated along the way, eventually venting their excess along with SO 2 , CO 2 , and other components of the carrier gas, into the atmosphere. These elements, many of which are toxic, may also be dispersed by mixing with groundwater in the permeable crust below volcanoes and generate potential health risks due to Hg, As, and Se contamination of drinking water resources.

Earth-Science Reviews↗

USGS2013

Porphyry copper assessment of Europe, exclusive of the Fennoscandian Shield: Chapter K in Global mineral resource assessment

The U.S. Geological Survey (USGS) collaborated with European geologists to assess resources in porphyry copper deposits in Europe, exclusive of Scandinavia (Sweden, Denmark, Norway, and Finland) and Russia. Porphyry copper deposits in Europe are Paleozoic and Late Cretaceous to Miocene in age. A number of the 31 known Phanerozoic deposits contain more than 1 million metric tons of contained copper, including the Majdanpek deposit, Serbia; Assarel, Bulgaria; Skouries, Greece; and Rosia Poeni, Romania. Five geographic areas were delineated as permissive tracts for post-Paleozoic porphyry copper deposits. Two additional tracts were delineated to show the extent of permissive igneous rocks associated with porphyry copper mineralization related to the Paleozoic Caledonian and Variscan orogenies. The tracts are based on mapped and inferred subsurface distributions of igneous rocks of specific age ranges that define areas where the occurrence of porphyry copper deposits within 1 kilometer of the Earth’s surface is possible. These tracts range in area from about 4,000 to 93,000 square kilometers. Although maps at a variety of different scales were used in the assessment, the final tract boundaries are intended for use at a scale of 1:1,000,000. The post-Paleozoic deposits in Europe all formed in conjunction with the tectonic evolution of southern Europe as the former Tethyan Ocean closed by convergence of the African and Arabian Plates with Europe, accompanied by accretion of microcontinents to the southern Eurasian Plate and development and demise of magmatic arcs and ocean basins. Many of the deposits formed in extensional or post-collisional settings; these tectonic environments are increasingly being recognized as environments where porphyry copper deposits occur. Probabilistic estimates of undiscovered porphyry copper deposits were made for four Phanerozoic permissive tracts; the other tracts are discussed qualitatively. Assessment participants estimated numbers of undiscovered deposits at different levels of confidence for the four tracts. These estimates were then combined with grade and tonnage models using Monte Carlo simulation to generate probabilistic estimates of amounts of in-place undiscovered resources. Additional resources that may be present in extensions of known deposits were not evaluated. Assessment results are reported in tables and graphs as expected amounts of metal and rock in undiscovered deposits at different quantile levels, as well as the arithmetic mean for each commodity for each tract. This assessment estimated a mean of 14 undiscovered porphyry copper deposits within the four permissive tracts for which estimates were made. On the basis of global grade and tonnage models, mean (arithmetic) estimated resources that could be associated with undiscovered deposits are about 46 million metric tons of copper and about 2,600 metric tons of gold, as well as byproduct molybdenum and silver. Reliable reported identified resources for the 27 deposits in the assessed areas total about 44 million metric tons of copper and about 2,300 metric tons of gold. Exploration for gold-rich porphyry systems is ongoing in some parts of historical copper mining districts in central Europe and in northwesternmost (European) Turkey. Political and social conflicts, environmental concerns associated with historical mining, and the global economic situation have had negative effects on exploration, development, and mining in Europe for many years. The assessment includes an overview with summary tables. Detailed descriptions of each tract, including the rationales for delineation and assessment, are given in appendixes A–G. Appendix H describes a geographic information system (GIS) that includes tract boundaries and point locations of known porphyry copper deposits and significant prospects.

Scientific Investigations Report↗

USGS2012

Pyrite–sulfosalt reactions and semimetal fractionation in the Chinkuashih, Taiwan, copper–gold deposit: A 1 Ma paleo-fumarole

The mineralized fracture system that underlay paleo-fumarole field at Chinkuashih, Taiwan has been exposed by copper–gold mining to depths of about 550 m below the paleo-surface. Its mineralogy and systematic variations in metal and semimetal (Fe, Cu, As, Sb, Bi, Hg, Cd, Sn, Zn, Pb, Se, Te, Au, Ag) concentrations provide insights into the chemical responses of a magmatic-vapor phase as it expands through fracture arrays to the surface and discharges as fumaroles associated with more extensive solfatara. At Chinkuashih, following initial sealing of the fractures by silica-alunite alteration, brittle failure reestablished discharge from an underlying reservoir of magmatic vapor. Crystalline pyrite was deposited first in the fractures and was succeeded and replaced by ‘enargite’ (Cu 3 (As,Sb)S 4 ) as sulfosalt encrustations (‘sublimate’) on fracture surfaces and in extensional cracks. Subsequent recrystallization resulted in complex exsolution intergrowths with antimony fractionation to the evolving crystal–vapor interface. Heavy metal fractionation between sulfosalt and vapor enriched the vapor phase in heavy metals that subsequently precipitated as complex Bi–Hg–Sn sulfosalts in discrete areas (paleo-fumaroles) close to the paleo-surface in a manner analogous to modern-day fumaroles on active volcanoes such as Vulcano, Italy. As in similar paleo-fumaroles (e.g., El Indio, Chile and Lepanto, Philippines), the most characteristic reaction sequence is the partial replacement of the early pyrite by enargite and Fe-tennantite. It is proposed that this reaction tracks the decrease in the pressure of the underlying magmatic-vapor reservoir because of the sustained discharge of vapor to the surface.

Geofluids↗

USGS2011

Magmatic-vapor expansion and the formation of high-sulfidation gold deposits: Structural controls on hydrothermal alteration and ore mineralization

High-sulfidation copper–gold lode deposits such as Chinkuashih, Taiwan, Lepanto, Philippines, and Goldfield, Nevada, formed within 1500 m of the paleosurface in volcanic terranes. All underwent an early stage of extensive advanced argillic silica–alunite alteration followed by an abrupt change to spatially much more restricted stages of fracture-controlled sulfide–sulfosalt mineral assemblages and gold–silver mineralization. The alteration as well as ore mineralization stages of these deposits were controlled by the dynamics and history of syn-hydrothermal faulting. At the Sulfate Stage, aggressive advanced argillic alteration and silicification were consequent on the in situ formation of acidic condensate from magmatic vapor as it expanded through secondary fracture networks alongside active faults. The reduction of permeability at this stage due to alteration decreased fluid flow to the surface, and progressively developed a barrier between magmatic-vapor expansion constrained by the active faults and peripheral hydrothermal activity dominated by hot-water flow. In conjunction with the increased rock strength resulting from alteration, subsequent fault-slip inversion in response to an increase in compressional stress generated new, highly permeable fractures localized by the embrittled, altered rock. The new fractures focused magmatic-vapor expansion with much lower heat loss so that condensation occurred. Sulfide Stage sulfosalt, sulfide, and gold–silver deposition then resulted from destabilization of vapor phase metal species due to vapor decompression through the new fracture array. The switch from sulfate to sulfide assemblages is, therefore, a logical consequence of changes in structural permeability due to the coupling of alteration and fracture dynamics rather than to changes in the chemistry of the fluid phase at its magmatic source.

Ore Geology Reviews↗

USGS2011

Control of Precambrian basement deformation zones on emplacement of the Laramide Boulder batholith and Butte mining district, Montana, United States

What are the roles of deep Precambrian basement deformation zones in the localization of subsequent shallow-crustal deformation zones and magmas? The Paleoproterozoic Great Falls tectonic zone and its included Boulder batholith (Montana, United States) provide an opportunity to examine the importance of inherited deformation fabrics in batholith emplacement and the localization of magmatic-hydrothermal mineral deposits. Northeast-trending deformation fabrics predominate in the Great Falls tectonic zone, which formed during the suturing of Paleoproterozoic and Archean cratonic masses approximately 1,800 mega-annum (Ma). Subsequent Mesoproterozoic to Neoproterozoic deformation fabrics trend northwest. Following Paleozoic through Early Cretaceous sedimentation, a Late Cretaceous fold-and-thrust belt with associated strike-slip faulting developed across the region, wherein some Proterozoic faults localized thrust faulting, while others were reactivated as strike-slip faults. The 81- to 76-Ma Boulder batholith was emplaced along the reactivated central Paleoproterozoic suture in the Great Falls tectonic zone. Early-stage Boulder batholith plutons were emplaced concurrent with east-directed thrust faulting and localized primarily by northwest-trending strike-slip and related faults. The late-stage Butte Quartz Monzonite pluton was localized in a northeast-trending pull-apart structure that formed behind the active thrust front and is axially symmetric across the underlying northeast-striking Paleoproterozoic fault zone, interpreted as a crustal suture. The modeling of potential-field geophysical data indicates that pull-apart?stage magmas fed into the structure through two funnel-shaped zones beneath the batholith. Renewed magmatic activity in the southern feeder from 66 to 64 Ma led to the formation of two small porphyry-style copper-molybdenum deposits and ensuing world-class polymetallic copper- and silver-bearing veins in the Butte mining district. Vein orientations parallel joints in the Butte Quartz Monzonite that, in turn, mimic Precambrian deformation fabrics found outside the district. The faults controlling the Butte veins are interpreted to have formed through activation under shear of preexisting northeast-striking joints as master faults from which splay faults formed along generally east-west and northwest joint plane orientations.

Scientific Investigations Report↗

USGS2010

Sulfosalt melts: Evidence of high-temperature cvapor transport of metals in the formation of high-sulfidation lode gold deposits

In enargite-gold (high-sulfidation) vein deposits, magmatic fluid is considered responsible for the transport of metals and sulfur into the depositional regime. New data from Field-Emission SEM analyses of sulfosalt mineral assemblages (primarily enargite and tennantite) from El Indio, Chile, and Summitville, Colorado, provide direct evidence of high-temperature deposition, including the following: (1) the preservation of delicate euhedral quartz assemblages in sulfosalts, (2) a range of discrete Sb-rich sulfosalt, quartz, feldspar, and flourapatite vug-filling minerals, and (3) symplectic sulfosalt-chalcopyrite textures that are arguably quenched melts. Together, these features indicate formation from the vapor phase at high temperatures. Furthermore, euhedral quartz crystals from El Indio contain high-temperature, vapor-rich fluid inclusions. Combined, these observations are interpreted as suggestive of deposition in response to vapor-phase decompression within fracture arrays that may be considered the analogues of the feeder fractures beneath large low-grade silver-gold deposits such as Yanacocha, Peru.

El Indio, Summitville↗

USGS2010

Characterization of Geologic Structures and Host Rock Properties Relevant to the Hydrogeology of the Standard Mine in Elk Basin, Gunnison County, Colorado

The Standard Mine Superfund Site is a source of mine drainage and associated heavy metal contamination of surface and groundwaters. The site contains Tertiary polymetallic quartz veins and fault zones that host precious and base metal sulfide mineralization common in Colorado. To assist the U.S. Environmental Protection Agency in its effort to remediate mine-related contamination, we characterized geologic structures, host rocks, and their potential hydraulic properties to better understand the sources of contaminants and the local hydrogeology. Real time kinematic and handheld global positioning systems were used to locate and map precisely the geometry of the surface traces of structures and mine-related features, such as portals. New reconnaissance geologic mapping, field and x-ray diffraction mineralogy, rock sample collection, thin-section analysis, and elemental geochemical analysis were completed to characterize hydrothermal alteration, mineralization, and subsequent leaching of metallic phases. Surface and subsurface observations, fault vein and fracture network characterization, borehole geophysical logging, and mercury injection capillary entry pressure data were used to document potential controls on the hydrologic system.

Open-File Report↗

USGS2008

Preliminary model of porphyry copper deposits

The U.S. Geological Survey (USGS) Mineral Resources Program develops mineral-deposit models for application in USGS mineral-resource assessments and other mineral resource-related activities within the USGS as well as for nongovernmental applications. Periodic updates of models are published in order to incorporate new concepts and findings on the occurrence, nature, and origin of specific mineral deposit types. This update is a preliminary model of porphyry copper deposits that begins an update process of porphyry copper models published in USGS Bulletin 1693 in 1986. This update includes a greater variety of deposit attributes than were included in the 1986 model as well as more information about each attribute. It also includes an expanded discussion of geophysical and remote sensing attributes and tools useful in resource evaluations, a summary of current theoretical concepts of porphyry copper deposit genesis, and a summary of the environmental attributes of unmined and mined deposits.

Open-File Report↗

USGS2006

Hydrogeochemical investigations in the Osgood Mountains, north-central Nevada

Field investigations performed in the Osgood Mountains during the summers of 1999 and 2000 were designed to test methods of combining geologic, hydrologic, and geochemical investigations. The goals were to develop a more thorough understanding of the movement of water through the study area and to understand the water-rock reactions that may occur along flow paths. The Osgood Mountains were chosen for study because they represent a well-defined geologic system, based on existing and new field data. New work in the area focused on gathering more data about fractures, faults, and joints and on collecting water samples to evaluate the role of geologic structures on hydrologic and geochemical properties of the ground-water/surface-water system. Chemical methods employed in the study included measuring traditional field parameters (e.g., pH, temperature, conductivity, dissolved oxygen) as well as Fe2+ and collecting a variety of samples that were preserved for later laboratory analysis. Hydrologic methods included closely spaced evaluations of substream hydraulic head to define ground-water discharge and recharge zones as well as some measurements of stream discharge. Geologic investigations focused on the locations and orientations of fractures and kinematic indicators of slip observable in outcrops.

Nevada↗