Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Wisconsin Geological & Natural History Survey Information Circular”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources
USGS1972

Trends in ground-water levels in Wisconsin, 1967-1971

This report supplements the Wisconsin Geological and Natural History Survey, Information Circular No.9, "Trends in Ground-Water Levels in Wisconsin through 1966". It describes, by hydrographs, the ground-water level trends in Wisconsin for the period 1967-1971. All current observation wells with more than three years of record are included; records of observation wells discontinued since 1967 and records of wells with less than three years of record are not included. Explanatory and interpretive material is in Circular 9.

Wisconsin↗
USGS1976

Ground-water resources and geology of Walworth County, Wisconsin

Population growth in Walworth County, Wisconsin, requires an increasing amount of ground water. Good quality water is available from the sand-and gravel, Niagara, Galena-Platteville, and sandstone aquifers in the county. As much as 15 gallons per minute (0.95 liters per second) can be obtained from individual wells almost everywhere in the county. Well yields of 1,000 gallons per minute (63 liters per second) are available from glacial drift where it contains sufficient thickness of saturated sand and gravel. The sand-and-gravel aquifer is an important source of municipal water. Estimated well yields from most of the Niagara aquifer, a Silurian age dolomite as thick as 125 feet (38.1 meters), exceed 100 gallons per minute (6.3 liters per second). The Niagara aquifer occurs in the eastern third of the county. The Galena-Platteville aquifer, chiefly dolomite, is present in the western half of the county where it is as thick as 325 feet (99.1 meters). Estimated yields from this aquifer exceed 500 gallons per minute (32 liters per second). The sandstone aquifer underlies the entire county and ranges from less than 800 feet (240 meters) thick in the northwest corner to more than 2,200 feet (670 meters) in the east. This aquifer is capable of yielding 1,000 gallons per minute (63 liters per second) to individual wells and is a principal source of municipal water.

Wisconsin↗
USGS1989

Hydrogeology of Wood County, Wisconsin

The presence of low-permeability Precambrian rocks near land surface limits ground-water availability in the northern two-thirds of Wood County. Sand and gravel deposits provide large amounts of water (more than 500 gallons per minute) to some wells in the southeastern part of the county. Fine-grained unconsolidated deposits generally are less than 20 feet thick in the northern two-thirds of the county, but sand and gravel deposits 40- to 100-feet thick underlie the extreme southeastern part of the county. Horizontal hydraulic conductivity of the sand and gravel deposits ranges from about 155 to about 280 feet per day. The horizontal hydraulic conductivity of fine-grained unconsolidated deposits in the northern part of the county ranges from about 0.02 to 2 feet per day. Where unconsolidated deposits do not yield dependable water supplies, wells are finished in Precambrian rocks. Fractures occurring at shallow depths are the primary source of water for wells finished in Precambrian rocks. Because the number of fractures tends to decrease with depth, the horizontal hydraulic conductivity of these rocks generally decreases from about 11 feet per day in wells less than 50-feet deep to about 0.02 foot per day in wells greater than 160 feet deep. Estimates of ground-water recharge to sand and gravel deposits in the southeastern part of the county range from about 7 to 12 inches per year. Recharge estimates for the central and northern parts of the county range from about 1 to 4 inches per year. The total dissolved-solids concentration in ground water in Wood County is relatively low. Concentrations in water samples from 124 wells ranged from 21 to 578 milligrams per liter, with a median concentration of about 190 milligrams per liter. Major dissolved constituents are calcium, magnesium, and bicarbonate; sodium, potassium, chloride, and sulfate are present in low concentrations. The most common water-quality problem in Wood County is elevated iron concentrations. Iron concentrations greater than 300 micrograms per liter were found in 54 of 124 samples, and 15 samples contained iron concentrations greater than 5,000 micrograms per liter. Nitrate as nitrogen concentrations exceeded Wisconsin's drinking-water standard (10 milligrams per liter) in water from just 4 of 124 wells. The pesticide aldicarb was detected in 7 of 36 samples, and various volatile organic compounds were detected in 24 of 102 ground-water samples collected by the Wisconsin Department of Natural Resources since 1980. Wells in which these chemicals were detected are near irrigated agricultural fields and in commercially developed areas where buried gasoline-storage tanks and chemical spills are more likely to occur. A reconnaissance approach combining electromagnetic surveys and sampling for water-quality indicators was used to assess effects of leachate on ground water near seven landfills. Results of the electromagnetic surveys were used to site water-quality observation wells. Total dissolved-solids concentrations and concentrations of volatile organic compounds, chloride, sulfate, iron, chemical oxygen demand, and organic carbon are some of the chemical constituents analyzed in samples collected from these wells. The average rate of ground·water pumpage in Wood County in 1985 was 9.7 million gallons per day. Of this rate, about 6 million gallons per day is pumped from municipal-supply wells in seven communities.An additional 1.08 million gallons per day is pumped for agricultural irrigation.

Wisconsin↗
USGS1987

Analysis of water-level fluctuations in Wisconsin wells

More than 60 percent of the residents of Wisconsin use ground water as their primary water source. Water supplies presently are abundant, but ground-water levels continually fluctuate in response to natural factors and human-related stresses. A better understanding of the magnitude, duration, and frequency of past fluctuations, and the factors controlling these fluctuations may help anticipate future changes in ground-water levels. This report presents the results of statistical analyses of historical ground-water level fluctuations in Wisconsin. Short- and long-term fluctuations are discussed in terms of their relation to components of the hydrogeologic system. Water-level measurements from 124 wells with at least 20 years of record each were used in the study. The mean, highest and lowest monthly mean, median, and selected quantiles were obtained using the SAS Proc Univariate procedure. The frequency values from the Univariate table were used to construct stage-duration graphs. Pearson Type ill frequency analyses were used to obtain probabilities of exceedance of particular water levels. The data were divided into seasonal data sets for each well. The stage-duration and Pearson Type III analyses are based on past fluctuations but may be useful for estimating future water-level changes under similar conditions. Multiple-regression analyses were run on data from groups of wells representing different ground-water districts. The SAS Proc Stepwise method was used. The regression model used average annual amplitude as the dependent variable and mean water level, mean annual precipitation, standard deviation of the seasonal mean precipitation, aquifer type, and topographic setting as the independent variables.This procedure produced different regression equations for each hydrogeologic district. Regression analyses also were done on data from groups of wells representing different aquifers. These regression models used average annual amplitude as the dependent variable and mean water level, topographic setting, and standard deviation of seasonal mean precipitation as the independent variables. Because of the many factors influencing ground-water level fluctuations, it was difficult to obtain a regression model that accurately reproduced average annual amplitude. The results of the regression analyses are helpful in recognizing the important variables; however, the equations are not effective in predicting the amplitude of a particular well because local conditions were omitted in the regional analyses. Hydrographs of average annual water level and frequency distribution analyses of annual maximum and minimum water levels were inspected for possible long-term trends. Analysis of annual maximum and minimum water levels indicates several periods in the annual cyclic fluctuations-two periods of recession (winter and summer), and two periods of rising levels (spring and fall). Usually, water levels are lowest in late winter and highest in spring for every annual cycle. The summer-fall minimum and the fall maximum are less distinct and do not occur every year. A composite frequency analysis of extreme annual water levels on 71 of the wells shows that the lowest levels most frequently occur in December, February, or March. However, the record low usually occurs in August, September, or October during drought. Ground-water levels most often peak in May, April, or June. In the fan they may peak from September through December, depending upon complexities of meteorological, geomorphological, and geological factors. The long-term cyclicity of ground-water level fluctuations is shown on hydrographs of wells Sw-7, Ln-25a, Mt-7, Ju-8, and Ju-98. Seasonal variations that tend to obscure the long-term trends are eliminated by plotting the average annual water levels. The hydrographs are similar even though the wells are 80 to 100 miles apart and constructed in different geologic materials. The long-term trends and the duration of the cycles apparently depend little on the location and on the lithologic composition of the aquifers, but rather on precipitation. The hydrographs show several periods of welldefined peaks and lows. The ground-water levels reached peaks in 1946, 1952, 1960, 1966, 1973, 1979. The average interval between these peaks is 6.6 years. The low levels occurred in 1949, 1955-59, 1964, 1970, and 1977; average interval between the low levels is 7.0 years, which is similar to that for the high levels. Long-term trends are apparent on hydrographs of wells Br-46, Mr-2S, Pt-276, Ro-3, and Ve-8. The trend of average annual water levels has been generally increasing since the late 1950's and is in general agreement with the increasing trend of precipitation. Hydrographs of well Ve-8, which has the longest period of record in Wisconsin, indicate that the generally rising trend started even earlier at the end of an extensive drought period in the 1930's.

Wisconsin↗
USGS1987

Water resources of Langlade County, Wisconsin

Langlade County depends almost exclusively on ground water pumped from the glacial sand and gravel deposits for its water needs. Well yields of 10 to 20 gallons per minute can be obtained from these deposits throughout most of the county. Yields of 500 to 1,000 gallons per minute are obtained for irrigation of crops from glacial outwash deposits in some areas of the county and particularly in the extensive 125-square-mile outwash plain in south-central Langlade County. Very low yields of less than 5 gallons per minute are obtainable for private domestic use from Precambrian crystalline rocks in areas of the county where overlying glacial material is thin. Glacial deposits are more than 400 feet thick in glacial moraine areas of east-central Langlade County; saturated thicknesses exceed 250 feet in the north-central part of the county. Horizontal hydraulic conductivity values of glacial material range from less than 1 foot per day in fine-grained glacial tills in western parts of the county to approximately 145 feet per day in outwash deposits. The transmissivity of glacial deposits ranges from essentially zero in areas of unsaturated glacial material to more than 40,000 feet squared per day in the outwash plain of southcentral Langlade County. Most surface and ground water originates from precipitation falling within the county. Streams and ground water flow into the county only in areas along its northern edge. Ground water supplies about 70 percent of the annual streamflow. Ground-water composition in Langlade County is similar to most ground water in the State and is of suitable quality for most uses. It is a calcium magnesium bicarbonate type. Concentrations of total dissolved solids are relatively low and range from 71 to 369 milligrams per liter, with a median value of 144 milligrams per liter. Dissolved iron and manganese concentrations exceeded secondary (aesthetic) standards in about 30 percent of all ground-water analyses. Values for total hardness as calcium carbonate ranged from 48 to 280 milligrams per liter for all samples. Ground water classified as very hard was confined to the southern part of the county where glacial deposits are higher in carbonate mineral content. An average of about 4.7 million gallons of water was pumped daily in Langlade County in 1983. Irrigation and fish rearing are the major ground-water uses in the county. An average of about 4.2 million gallons per day was pumped for irrigation during the months of June, July, and August. Results of this study show that present irrigation pumpage rates have little effect on groundwater levels in the Antigo Flats area.

Wisconsin↗
USGS1986

Hydrogeology and ground-water use and quality, Brown County, Wisconsin

The Paleozoic rock of Brown County includes formations of Cambrian, Ordovician, and Silurian age. These formations are eastward-dipping sedimentary rock that rest on Precambrian crystalline rock and are overlain by Pleistocene deposits. The units that are the principal sources of ground water were grouped into three aquifers (upper, St. Peter, and Elk Mound), and the less permeable units are grouped into three confining units (Maquoketa-Sinnipee, St. Lawrence, and Precambrian). The geologic and hydraulic characteristics of the aquifers and confining units are estimated from logs of more than 1,000 Brown County wells, from results of a packer test, and from published values. Recharge to the water table, which was estimated at five monitored sites, ranges from 1 to 6 inches a year; most recharge is contributed by spring snowmelt and rainfall. A cone of depression caused by pumping the deeper aquifers in the Green Bay metropolitan area induces flow from the upper aquifer to the underlying st. Peter aquifer throughout most of the county. Several reaches of Duck Creek and the Suamico River also contribute water to the aquifers. A bout 13 million gallons per day of ground water was pumped in Brown County during 1979, 63 percent of which was from wells open to both the St. Peter and Elk Mound aquifers. Municipal and industrial water users pumped 9.44 million gallons per day or 72 percent of the ground water withdrawn in 1979. Most ground :water in the county is a calcium magnesium bicarbonate type. However, water from wells sampled in an area between the Fox River and Silurian escarpment have elevated levels of sodium (44 milligrams per liter) and sulfate (226 milligrams per liter). Water from wells that tap rocks older than Silurian dolomite contains high concentrations of strontium (more than 2.4 milligrams per liter) and fluoride (more than 0.85 milligrams per liter). A three-dimensional digital model was used to simulate flow in the ground-water system. Model results indicate that sources of ground water pumped from wells tapping the St. Peter and Elk Mound aquifers in Brown County, 1979, include 4.8 million gallons per day of underflow, most of which enters the county across the west border; 1.9 million gallons per day of flow from vertical leakage within the county; and 1.5 million gallons per day from storage. The model is most sensitive to the horizontal hydraulic conductivity of the upper aquifer. Vertical hydraulic conductivity of the confining units and recharge rates to the water-table aquifer are the least well-defined model parameters.

Wisconsin↗
USGS1983

Ground-water resources and geology of Dodge County, Wisconsin

The ground-water resources of Dodge County were evaluated to aid planners in meeting the needs resulting from growth in population and industry. The sand-and-gravel, Silurian dolomite, Galena-Platteville, and sandstone aquifers are the principal sources of ground water. Probable well yields from the sand- and-gravel aquifer and the Galena-Platteville aquifer range from 100 to 500 gallons per minute. Probable well yields for the Silurian dolomite, which depend in part on the degree of fracturing, are about 100 gallons per minute. Probable well yields from the sandstone aquifer range from less than 100 to more than 1,000 gallons per minute. Calcium and bicarbonate are the principal ions in ground water in Dodge County. The water is very hard, and the concentration of iron commonly exceeds the recommended limit for drinking water and the desirable concentration for water used for high-pressure boiler feed, some food processing, and leather finishing industries. The ground water generally is of suitable chemical quality for domestic, agricultural, and most industrial purposes. In 1979, an average of about 13 million gallons of ground water was pumped daily for residential, industrial, commercial, irrigation, stock watering, and other purposes.

Wisconsin↗
USGS1983

Trends in ground-water levels in Wisconsin through 1981

Hydrographs of ground-water levels in Wisconsin display fluctuations in the potentiometric surface of confined and unconfined aquifers. The graphs are plotted from periodic (weekly or monthly) measurements and from continuous recording gage records. Two hundred and ten hydrographs having periods of record of at least 5 years between 1934 and 1981 are included. The water-level changes shown represent both natural fluctuations reflecting climatic control and declines or recovery brought about by pumping or cessation of pumping of ground water.

Wisconsin↗
USGS1982

Hydrology of Wisconsin wetlands

Data from 15 wetland study sites, supplemented by data from reconnaissance visits to 219 additional wetlands, were used to describe the hydrologic characteristics of Wisconsin wetlands and to suggest a simple hydrologic classification system. Wisconsin's wetlands OCCUf in depressions and on slopes. They may be in contact with ground water or totally surface-water supported. Hydrologically, wetlands may be classed as surface-water depression, surface-water slope, ground-water depression, or ground-water slope wetlands. Precipitation comprises more than half of the inflow to all but the ground-water slope wetlands, where ground water may provide as much as 90 percent of the inflow. Flood peaks may be as much as 80 percent lower in basins with much wetland area than in similar basins with little or no wetland area. Ground-water recharge appears to be less in basins with much wetland area than in basins with little or no wetland area. Wetlands retain sediment, and sediment loads in streams draining basins with much wetland area may be 90 percent lower than those in streams draining basins with little or no wetland area.

Wisconsin↗
USGS1981

Ground-water quality atlas of Wisconsin

This report summarizes data on ground-water quality stored in the U.S. Geological Survey's computer system (WATSTORE). The summary includes water quality data for 2,443 single-aquifer wells, which tap one of the State's three major aquifers (sand and gravel, Silurian dolomite, and sandstone). Data for dissolved solids, hardness, alkalinity, calcium, magnesium, sodium, potassium, iron, manganese, sulfate, chloride, fluoride, and nitrate are summarized by aquifer and by county, and locations of wells for which data are available 1 are shown for each aquifer. Calcium, magnesium, and bicarbonate (the principal component of alkalinity) are the major dissolved constituents in Wisconsin's ground water. High iron concentrations and hardness cause ground-water quality problems in much of the State. Statewide ,summaries of trace constituent (selected trace metals; arsenic, boron, and organic carbon) concentrations show that these constituents impair water quality in only a few isolated wells.

Wisconsin↗
USGS1980

Ground-water resources and geology of Washington and Ozaukee Counties, Wisconsin

Population growth is placing increased demands on water supplies in Washington and Ozaukee Counties. Water from three principal aquifers supplies most municipal, industrial, irrigation, residential, and farm water needs in these counties. These are the sand-and-gravel, Niagara, and sandstone aquifers. As much as 15 gallons per minute can be obtained from wells almost everywhere in these counties. Yields of 500 to 1,000 gallons per minute are available from the sand-and-gravel aquifer in parts of Washington County. The Niagara aquifer underlies most of the area and can yield as much as 500 gallons per minute in most of Ozaukee and eastern Washington Counties. It yields less than 100 gallons per minute in some areas, notably eastern Mequon in Ozaukee County and parts of western Washington County. The sandstone aquifer underlies the entire area and generally can yield more than 1,000 gallons per minute to wells. However, yields of less than 500 gallons per minute are common in southwestern Washington County, where the aquifer is thinnest.

Wisconsin↗
USGS1978

Ground-water resources and geology of Columbia County, Wisconsin

The increasing need for water of good Quality in Columbia County, caused by a steadily increasing population, can be met from the sand-and-gravel and sandstone aquifers. As much as 15 gallons per minute can be obtained from wells almost everywhere. Yields of more than 1,000 gallons per minute are available from drift where it contains a sufficient thickness of saturated sand and gravel (the sand-and-gravel aquifer). The sandstone aquifer underlies nearly all the county except for areas west of the Wisconsin River and northwest of Pardeeville. It is more than 700 feet thick in the south-central part. The sandstone aquifer includes all bedrock younger than Precambrian age and is capable of yielding more than 1,000 gallons per minute to wells in about three-fourths of the county. It is the principal source of municipal-water supply. The chemical quality of water from the two aquifers is similar. It is very hard (mean concentration of about 300 milligrams per liter as calcium carbonate), and much of it contains excessive amounts of iron and manganese. Concentrations of dissolved solids and chloride are higher in areas underlain by bedrock of Ordovician age than elsewhere. About 5.0 million gallons per day of water was pumped in the county in 1974, 90 percent from the sandstone aQuifer. About 45 percent of the total water pumped was for industrial and commercial purposes~ 37 percent was for residential use, 16 percent for municipal use, and 2 percent for irrigation.

Wisconsin↗
USGS1975

Ground-water resources and geology of Jefferson County, Wisconsin

A steadily increasing population in Jefferson County, Wisconsin, is expanding the need for good-quality ground water. This need can be met by good-quality water available from the sand-and-gravel, Galena-Platteville, and sandstone aquifers. As much as 15 gallons per minute (0.95 liters per second) can be obtained from wells almost everywhere in the county. Yields of more than 1,000 gallons per minute (63 liters per second) are available from glacial drift where it contains a sufficient thickness of saturated sand and gravel. The Galena-Platteville aquifer is a dolomite that occurs mainly in the eastern one-half of the county and is locally more than 300 feet (90 meters) thick. Estimated well yields from this aquifer exceed 500 gallons per minute (32 liters per second). The sandstone aquifer underlies nearly the entire county except for small areas in the northwest corner. It is more than 1,100 feet (330 meters) thick in the southwest along the Dane-Jefferson County line. This aquifer is capable of yielding more than 1,000 gallons per minute (63 liters per second) to wells in much of the county and is the principal source of municipal water. The chemical quality of water from the three aquifers is similar. The water is very hard, having a median hardness between 315 and 325 milligrams per liter. Median values for dissolved solids range between 325 and 349 milligrams per liter. Iron and manganese commonly are present in bothersome amounts (combined total exceeding 0.3 milligrams per liter. About 13.0 million gallons per day (0.570 cubic meters per second) of ground water was pumped in the county in 1972, 87 percent from the sandstone aquifer. About 62 percent of the total water pumped was for industrial and commercial purposes, 26 percent for residential use, and 12 percent for municipal, irrigation, and institutional use.

Wisconsin↗
USGS1976

Ground-water resources and geology of St. Croix County, Wisconsin

The increasing need for good-quality ground water in St. Croix County, caused by a steadily increasing population, can be met from the sand-and-gravel and sandstone aquifers. As much as 15 gallons per minute (0.95 litres per second) can be obtained from wells almost everywhere in the county. Yields of more than 1,000 gallons per minute (63 litres per second) are available from glacial deposits and alluvium where there is sufficient thickness of saturated sand and gravel. The sandstone aquifer underlies the entire county and is more than 1,000 feet (300 metres) thick in the southwest near River Falls. In St. Croix County the sandstone aquifer is all bedrock younger than Precambrian age and includes, in ascending order, from oldest to youngest, sandstones of Cambrian age (in ascending order, the Mount Simon, Eau Claire, Galesville, and Franconia Sandstones, and the Trempealeau Formation); and the Prairie du Chien Group, St. Peter Sandstone, and Galena-Platteville unit (Platteville and Decorah Formations and Galena Dolomite, undifferentiated), all of Ordovician age. This aquifer is capable of yielding more than 1,000 gallons per minute (63 litres per second) to wells in much of the county and is the principal source of municipal water. The chemical quality of water from the two aquifers is similar. The water from both aquifers is hard to very hard, having a median hardness between 180 and 190 milligrams per litre. Iron and manganese are locally present in botherSome amounts (combined total exceeding 0.3 milligrams per litre). Nitrate is a minor problem in both aquifers, with median concentrations more than 10 milligrams per litre, possibly indicating some contamination of ground water by organic matter. About 3.83 million gallons per day (0.168 cubic metres per second) of ground water was pumped in the county in 1974, of which 94 percent was from the sandstone aquifer. About 44 percent of the total water pumped was for industrial and commercial use, 42 percent for residential

Wisconsin↗
USGS1975

The availability of ground water for irrigation in the Rice Lake-Eau Claire Area, Wisconsin

An abundance of ground water of excellent chemical quality for irrigating crops is available from glacial outwash sand and gravel and from the underlying sandstones in the Rice Lake-Eau Claire area. Thick deposits of glacial outwash sand and gravel in the valleys of the Red Cedar and lower Chippewa Rivers yield more than 1,000 gallons per minute (63 lit res per second) to many wells. Large tracts of irrigable soils, delineated in two subareas (Rice Lake and Cameron) in Barron County and one subarea (Menomonie) in Dunn County, lie within the outwash plains where ground water is available in large quantities. Yields are especially large in the Rice Lake and Cameron subareas where the sand and gravel is highly permeable and the thickness of saturated aquifer exceeds 250 feet (75 metres). Yields generally are less than 1,000 gallons per minute (63 litres per second) in the Menomonie subarea where large amounts of clay locally reduce the permeability of the aquifer and the thickness of saturated aquifer is less than 200 feet (60 metres). Adequate water for irrigation is available also from sandstone underlying the glacial outwash plains. Because the two aquifers generally are connected hydraulically, wells penetrating the sandstone also withdraw water indirectly from the glacial drift. Most irrigation wells in Barron County withdraw water from glacial outwash; more than half the irrigation wells in Dunn County withdraw water from sandstone. In most years, recharge to the ground-water reservoir is 6 to 8 inches (150 to 200 millimetres), which is more than ample to sustain pumping for irrigation without lowering the water table significantly. Ground water in the area is a calcium bicarbonate water that ranges in dissolved-solids concentration from 35 to 330 milligrams per litre. Concentrations of sodium and' boron are very low.

Wisconsin↗
USGS1975

Ground-water resources and geology of Waukesha County, Wisconsin

Good-quality water is available from the sand-and-gravel, Niagara, and sandstone aquifers in Waukesha County, Wis. As much as 15 gallons per minute (0.95 litres per second) can be obtained from wells almost everywhere in the county. Several hundred gallons per minute are available from aquifers in the glacial drift that fill bedrock valleys to thicknesses of 300 feet (91 metres) or more. Estimated well yields from much of the surficial outwash in western Waukesha County exceed 500 gallons per minute (31 litres per second). Estimated well yields from most of the Niagara aquifer, a dolomite as much as 325 feet (99 metres) thick in the eastern two-thirds of the county, exceed 50 gallons per minute (3.2 litres per second). The sandstone aquifer underlies the entire county and ranges in thickness from about 400 feet (120 metres) in the northwest corner to about 2,400 feet (730 metres) in the southeast corner. This aquifer yields more than 1,000 gallons per minute (63 litres per second) to wells over most of the county and is the principal source for municipal and subdivision water. Ground water in Waukesha County is of good quality and is suitable for most uses. Most of the water is a calcium magnesium bicarbonate type, is very hard [more than 180 mg/l (milligrams per litre) hardness], and requires softening for some uses. The ground water locally contains iron and manganese concentrations that exceed the limits (0.3 and 0.05 mg/l, respectively) recommended by the U.S. Public Health Service (1962, p. 7). Water high in sulfate and dissolved solids (saline water) is present locally in the Niagara and sandstone aquifers. Water from one well contained excessive nitrate (more than 45 mg/l). With one exception, wells sampled at irregular intervals indicated no significant changes in their chemical characteristics with time. About 24.3 million gallons per day (1.06 cubic metres per second) of ground water was pumped in the county in 1970. Sixty-two percent was withdrawn from the sandstone aquifer. More than one-half of the latter amount was for domestic use, and more than one-third was for industrial and commercial uses.

Wisconsin↗
USGS1972

Ground-water quality in Wisconsin through 1972

Ground water, a plentiful and largely underdeveloped resource of Wisconsin, has good to excellent chemical quality in most places. This resource is readily available in most parts of the State for municipal, industrial, and rural uses. In 1970, about 0.5 billion gallons of ground water a day was pumped in Wisconsin for all uses (Murray and Reeves, 1972). In addition, underground reservoirs discharge an average of 16 billion gallons per day of water of relatively constant temperature and uniform quality, which maintains the base flow of streams and the level of lakes (Holt, 1964).

Wisconsin↗
USGS1970

Field trip guidebook to the hydrogeology of the Rock-Fox River basin of Southeastern Wisconsin

On this trip we will examine some hydrogeologic characteristics of glacial features and emphasize ground-water management within the Rock-Fox River basin. Field stops will include the hydrogeology of a classical glacial terrane--the Kettle moraine--and the management of ground-water resources for industrial, municipal, agricultural, and fish-culture purposes. Descriptions of the geology, soils, water availability and characteristics, water quality, water use, and water problems within the basin are given in the accompanying U.S. Geological Survey Hydrologic Atlas (HA-360). This atlas is a product of the cooperative program of University Extension--the University of Wisconsin Geological and Natural History Survey.

Wisconsin↗