Geology ReportsSearch

SEARCH · Geology Reports

Results for “Structure”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources

Point and line geologic structure information in "Structure, outcrop, and subcrop of the geologic structure information for the Arapahoe and Laramie-Fox Hills aquifers."

This digital geospatial data set consists of points and lines representing symbolization of geologic structure information for the Arapahoe and Laramie-Fox Hills aquifers. The symbols were developed as part of the report in "Structure, Outcrop, and Subcrop of the Bedrock Aquifers Along the Western Margin of the Denver Basin, Colorado" (Robson and others, 1998).

Colorado

Geologic structure and occurrence of gas in part of southwestern New York. Part 1, Structure and gas possibilities of the Oriskany sandstone in Steuben, Yates, and parts of the adjacent counties

The area covered by this report is in southwestern New York and includes a little more than 3,000 square miles in Steuben and Yates counties and parts of the six adjacent counties. This area has been mapped to determine the structural attitude of the exposed rocks, so as to aid those interested in prospecting for natural gas in the Oriskany sandstone of Lower Devonian age. Because of the gentle regional dip toward the southwest, the youngest beds are exposed in the southwest corner of the area, and progressively older beds crop out northeastward in successive bands that strike generally northwest. All the exposed rocks are of Upper Devonian age except those in a narrow belt at the extreme north edge of the area, where a small thickness of Middle Devonian rocks crops out. The maximum thickness of beds so exposed is nearly 4,000 feet, of which the lower part is predominantly soft dark shale and the upper part predominantly fine-grained sandstone and gray shale. All the beds are marine except a few tongues of continental deposits red shale and sandstone and gray mudstone in the youngest beds. All the beds thicken southeastward, so that there is a northwestward convergence between any two lithologic units in the series. More than 30 key horizons that are persistent and distinctive were mapped, and altitudes on these key horizons served as a basis for constructing the structure contour map. Many of the key horizons are formation or member boundaries, but others are the tops or bottoms of limestone or sandstone beds within formations. All the stratigraphic units mapped are purely lithologic. (See pi. 2.) The Tully limestone, which crops out along the northern border of the area, is an easily recognizable and therefore valuable key bed for subsurface correlations in this part of the State. Below the Tully limestone is a thick body of Middle Devonian shales of the Hamilton group which rests on another valuable key bed, the hard, cherty Onondaga limestone, also of Middle Devonian age. Below the Onondaga limestone is the Lower Devonian Oriskany sandstone, which is the gas-producing bed. Unlike the Onondaga, the Oriskany is locally thin or absent. The structure of most of the area is shown by contour lines at 25-foot intervals, but where key horizons are lacking the structure is indicated by dip symbols. Upon the regional south and southwest dip are superposed numerous gentle folds whose axes trend approximately northeastward in the greater part of the area but more nearly eastward in the eastern part. The folds generally tend to become narrower and steeper, and therefore more closely spaced, southwestward. Many of the anticlines fork southwestward, whereas the synclines. tend to fork northeastward. All the folds have a westward or southwestward plunge. Throughout the area the rocks are jointed in two dominant sets one that trends northwest and the other east or northeast. No evident relation .between these joints, which were measured only in the hard, relatively brittle beds, and the individual folds or domes was discernible. The faults are concentrated in the northeastern and southwestern parts of the area and trend either northeastward or northwestward. Some are nearly vertical normal faults; others are steep reverse faults. Subsurface data show that most of the faults increase in throw downward and also that many subsurface faults do not reach the surface. A group of faults in the northwestern part of the Greenwood quadrangle and the southwestern part of the Hornell quadrangle were active during Upper Devonian time, while the Gowanda shale and overlying beds were being deposited. At this stratigraphic horizon the beds in a zone a few hundred feet thick are highly deformed in a wide belt on both sides of the faults. Sandstone layers are thinned out into long stringers or swollen into thick masses and in places are bent acutely without fracture. Thin layers of shale, coquina, and sand have flowed together into intricately plicated zones that lack cleavage and joints. These features show that the sediments were deformed while wet and plastic and buried only a little way below the sea floor. The beds that were laid down over these disturbed zones were not involved in this deformation. Many of the sharper flexures and most of the faults are not evident in the beds several hundred feet stratigraphically higher. Accordingly, broad, gentle folds in these higher beds in parts of the area south and west of the northwest corner of the Greenwood quadrangle may conceal, at considerable depths below them, narrow folds separated by abrupt flexures or faults. Several of the larger streams and rivers occupy strike valleys, and their j courses swing to follow the changing strike of the rocks where they cross ( successive folds. But, with few exceptions, the small streams are not adjusted to the bedrock structure. Domes likely to serve as traps for natural gas are concentrated in the northeastern and southwestern parts of the area. The Wayne-Dundee gas field is in the northeastern part. All the other potentially valuable domes in this part of the area have been drilled and found valueless except one small structural feature in the southern part of the Ovid quadrangle, which, if the Oriskany is present, may trap a small quantity of gas. In the Greenwood quadrangle in the southwestern part of the area there is one gas field and four well-defined domes, all of which may be productive if the Oriskany sandstone is present. In the northwest corner of the quadrangle the dips indicate at least two domes that can be adequately defined and evaluated only by geophysical prospecting. The State Line gas field is in tbe Wellsville quadrangle. In the southeast corner of this quadrangle there are three other domes of comparable size that may also be productive if underlain by the Oriskany sandstone. At other places in the Wellsville quadrangle the dips suggest several anticlinal axes on which analogous productive domes maybe found. The structural features in this quadrangle, however, are defined by contours only in the southeastern part. In the Woodhull quadrangle a large dome east of Jasper may be productive, and the western top of the large Woodhull dome in the southwestern part of the quadrangle seems to warrant drilling, despite the absence of the Oriskany in a well on the eastern top. Two wells drilled in 1936 and 1937 a little northeast of a broad, nearly flat-topped dome in the Hornell quadrangle, a few miles east of Hornell,, struck small flows of gas, suggesting that wells drilled higher on this dome may be productive. In much of the southwestern part of the area seismograph surveys should be of great value in determining the structure at the Tully and Onondaga horizons. Without abundant subsurface control of this sort, the danger of drilling into subsurface faults can hardly be overemphasized. Three closed or nearly closed synclines in the Greenwood and Wellsville quadrangles appear to be favorable places to drill for oil in the shallow sands presumably parts of the Dunkirk sandstone.

New York

Strong-acid, carboxyl-group structures in fulvic acid from the Suwannee River, Georgia. 1. Minor structures

An investigation of the strong-acid characteristics (pKa 3.0 or less) of fulvic acid from the Suwannee River, Georgia, was conducted. Quantitative determinations were made for amino acid and sulfur-containing acid structures, oxalate half-ester structures, malonic acid structures, keto acid structures, and aromatic carboxyl-group structures. These determinations were made by using a variety of spectrometric (13C-nuclear magnetic resonance, infrared, and ultraviolet spectrometry) and titrimetric characterizations on fulvic acid or fulvic acid samples that were chemically derivatized to indicate certain functional groups. Only keto acid and aromatic carboxyl-group structures contributed significantly to the strong-acid characteristics of the fulvic acid; these structures accounted for 43% of the strong-acid acidity. The remaining 57% of the strong acids are aliphatic carboxyl groups in unusual and/or complex configurations for which limited model compound data are available.

Environmental Science & Technology

Linkage between mantle and crustal structures and its bearing on inherited structures in northwestern Scotland

Deep seismic reflection profiles in Scotland reveal mantle structures beneath a crust with a polyphase tectonic history that resulted in several generations of structures. Continuum mechanics suggests that coeval mantle and crustal structures must be kinematically linked. Inherited structures imply relative ages for the reflectors, ages that can be placed into the context of the geological history of the near-surface rocks of northern Scotland. Thus, some mantle reflectors are assigned Triassic ages related to the opening of the West Orkney and related marginal basins of the Atlantic Ocean. Other mantle reflectors are cut by late Caledonian structures associated with the Great Glen Fault Zone and therefore older than c. 400 Ma. Many of these structures also track the late Precambrian margin of Laurentia and may be related to either the opening (900–600 Ma) or closing (500–600 Ma) of the Iapetus Ocean. Some reflective structures may also be attributed to 1800–1700 Ma Laxfordian deformation that was part of a global-scale orogenic belt.

Journal of the Geological Society

Fish assemblages at engineered and natural channel structures in the lower Missouri river: implications for modified dike structures

Large rivers throughout the world have been modified by using dike structures to divert water flows to deepwater habitats to maintain navigation channels. These modifications have been implicated in the decline in habitat diversity and native fishes. However, dike structures have been modified in the Missouri River USA to increase habitat diversity to aid in the recovery of native fishes. We compared species occupancy and fish community composition at natural sandbars and at notched and un-notched rock dikes along the lower Missouri River to determine if notching dikes increases species diversity or occupancy of native fishes. Fish were collected using gill nets, trammel nets, otter trawls, and mini fyke nets throughout the lower 1212 river km of the Missouri River USA from 2003 to 2006. Few differences in species richness and diversity were evident among engineered dike structures and natural sandbars. Notching a dike structure had no effect on proportional abundance of fluvial dependents, fluvial specialists, and macrohabitat generalists. Occupancy at notched dikes increased for two species but did not differ for 17 other species (81%). Our results suggest that dike structures may provide suitable habitats for fluvial species compared with channel sand bars, but dike notching did not increase abundance or occupancy of most Missouri River fishes. Published in 2011 by John Wiley & Sons, Ltd.

River Research and Applications

Crust and lithospheric structure – Global crustal structure

The Earth’s crust has played an important role in all aspects of this planet’s evolution. This chapter presents a review of our current understanding of the physical properties of the crust on a global basis. This understanding comes from extensive seismic measurements using many techniques, as well as nonseismic geophysics, including gravity, magnetic, geoelectric, and heat flow measurements. Seismic measurements include those that employ active (man-made) sources and those that use passive (naturally occurring) sources. Deep seismic reflection profiles provide a seismic image of the crust in twodimensions with a high (50–100m) resolution. Local earthquake tomography can provide three-dimensional (3-D) seismic images at moderate (500–1000m) resolution and higher, depending on the number and spacing of seismographs. Nonseismic methods provide estimates of crustal density, magnetic properties, conductivity and geotherms (temperature vs depth). The crust in deep ocean basins is 6–7km thick and has a relatively uniform seismic velocity structure, but there are numerous oceanic regions with anomalous crustal structure, including mid-ocean ridges, trenches, volcanic islands, and oceanic plateaux. Ocean–continent passive margins are also highly variable in structure, and may be classified as volcanic versus nonvolcanic margins. Continental crust ranges in thickness from 16 to 80km, and has a highly variable seismic velocity and density structure. The proportions of continental crust, by area, are 69% shield and platform (cratons), 15% old and young orogens, 9% extended (stretched) crust, 6 % magmatic arc, and 1% rifts. The weighted mean continental crustal thickness and average crustal velocity are 41km (SD 6.2km) and 6.45kms−1 (SD 0.21kms−1), respectively. A global geographic distribution of seismic data has made it possible to create global crustal models with cell sizes as small as 2°×2°. These models provide a complete description of seismic velocities and density within the crust and uppermost mantle, including, where present, ice, water, and sedimentary layers and the crystalline crust (parameterized in three layers, upper, middle and lower crust), and sub-Moho properties. The crust is the most intensely studied region of the Earth’s interior and consequently is the best understood in terms of its structure, composition, and evolution. © 2007 Elsevier B.V. All rights reserved.

Book chapter

Strong-acid, carboxyl-group structures in fulvic acid from the Suwannee River, Georgia. 2. Major structures

Polycarboxylic acid structures that account for the strong-acid characteristics (pKa1 near 2.0) were examined for fulvic acid from the Suwannee River. Studies of model compounds demonstrated that pKa values near 2.0 occur only if the a-ether or a-ester groups were in cyclic structures with two to three additional electronegative functional groups (carboxyl, ester, ketone, aromatic groups) at adjacent positions on the ring. Ester linkage removal by alkaline hydrolysis and destruction of ether linkages through cleavage and reduction with hydriodic acid confirmed that the strong carboxyl acidity in fulvic acid was associated with polycarboxylic a-ether and a-ester structures. Studies of hypothetical structural models of fulvic acid indicated possible relation of these polycarboxylic structures with the amphiphilic and metal-binding properties of fulvic acid.

Environmental Science & Technology

Physical modeling of river spanning rock structures: Evaluating interstitial flow, local hydraulics, downstream scour development, and structure stability

Rock weir and ramp structures uniquely serve a necessary role in river management: to meet water deliveries in an ecologically sound manner. Uses include functioning as low head diversion dams, permitting fish passage, creating habitat diversity, and stabilizing stream banks and profiles. Existing information on design and performance of in-stream rock structures does not provide the guidance necessary to implement repeatable and sustainable construction and retrofit techniques. As widespread use of rock structures increases, the need for reliable design methods with a broad range of applicability at individual sites grows as well. Rigorous laboratory testing programs were implemented at the U.S. Bureau of Reclamation (Reclamation) and at Colorado State University (CSU) as part of a multifaceted research project focused on expanding the current knowledge base and developing design methods to improve the success rate of river spanning rock structures in meeting project goals. Physical modeling at Reclamation is being used to measure, predict, and reduce interstitial flow through rock ramps. CSU is using physical testing to quantify and predict scour development downstream of rock weirs and its impact on the stability of rock structures. ?? 2009 ASCE.

Conference Paper

Visualizing impact structures using high-resolution LiDAR-derived DEMs: A case study of two structures in Missouri

Evidence suggests that a crypto-explosive hypothesis and a meteorite impact hypothesis may be partly correct in explaining several anomalous geological features in the middle of the United States. We used a primary geographic information science (GIScience) technique of creating a digital elevation model (DEM) of two of these features that occur in Missouri. The DEMs were derived from airborne light detection and ranging, or LiDAR. Using these DEMs, we characterized the Crooked Creek structure in southern Crawford County and the Weaubleau structure in southeastern St. Clair County, Missouri. The mensuration and study of exposed and buried impact craters implies that the craters may have intrinsic dimensions which could only be produced by collision. The results show elevations varying between 276 and 348 m for Crooked Creek and between 220 and 290 m for Weaubleau structure. These new high- resolution DEMs are accurate enough to allow for precise measurements and better interpretations of geological structures, particularly jointing in the carbonate rocks, and they show greater definition of the central uplift area in the Weaubleau structure than publicly available DEMs.

Missouri

Genetic structure of Smallmouth Bass in the Lake Michigan and Upper Mississippi River drainages relates to habitat, distance, and drainage boundaries: Smallmouth bass population genetic structure

Analysis of genetic connectivity helps to define stock boundaries and provides information on interpopulation dynamics, such as migration and spawning site fidelity. We used 16 microsatellite loci to describe the genetic population structure of 1,215 Smallmouth Bass Micropterus dolomieu from 32 sites throughout the upper Mississippi River and Lake Michigan watersheds. We found that Smallmouth Bass populations formed two genetically distinct units separated by the Mississippi River–Lake Michigan drainage boundary. Smallmouth Bass from the Lake Michigan drainage could be parsimoniously grouped into two or six genetically distinct units that largely corresponded with either river or lake habitats, while fish from the Mississippi River drainage grouped into two, six, or nine genetic units that were mostly associated with watershed boundaries. In the Lake Michigan and Mississippi River drainages, relative migration was limited between lake and river sites, suggesting that gene flow between neighboring sites with different habitat attributes can be low. Our research provides a higher‐resolution assessment of Smallmouth Bass genetic structure in a core portion of the species’ range and provides strong evidence that Smallmouth Bass populations are structured at small spatial scales that are potentially associated with habitat type. These results demonstrate the importance of evaluating genetic structure at small spatial scales and adopting management strategies that preserve genetic diversity of black bass populations at both the watershed level and the habitat level.

Michigan, Wisconsin

Is new actually better? A structural comparison of collaborative governance structures for the management of Atlantic salmon (Salmo salar) in Maine

Collaborative governance structures (CGS) have been increasingly adopted to address joint-jurisdictional management challenges. While the establishment of CGSs has been widely studied, their practical development has remained a conspicuous gap. CGSs are variable systems with several developmental stages (activation, collectivity, and institutionalization) which eventually lead to stabilization, decline, re-creation, or re-orientation. CGSs in decline may need to revisit earlier developmental stages if members choose to re-create or re-orient the structure. The Atlantic Salmon Recovery Framework (ASRF) was the CGS responsible for managing the Gulf of Maine Distinct Population Segment of Atlantic Salmon ( Salmo salar ) from 2011 until 2019 when it was replaced by the Collaborative Management Strategy (CMS) pilot program. The CMS was designed to address concerns identified in the ASRF; 1. slow and ineffective decision-making, 2. confusion surrounding leadership, and 3. low adaptive capacity. Building upon a previous evaluation of the ASRF, we used a parallel design to compare the structural components and participant perceptions of the two structures using a comparative case study methodology. The changes that occurred between the ASRF and the CMS constitute a re-creation, providing a unique opportunity to study this developmental phase of a CGS. The issues observed in the CMS may result from a misalignment between participant expectations and the current developmental stage of the re-created CGS. The CMS reorganized ASRF members and created roles for participants without direct management jurisdiction. The implementation of the CMS addressed many concerns identified in the ASRF while others remained (i.e., high membership uncertainty and confusion surrounding decision-making procedures). Formal leadership roles have created more equal representation, but participants still reported uncertainty regarding status and formalization of non-leadership roles.

Maine

Structural pattern in central uplifts of cryptoexplosion structures as typified by Sierra Madera

The pattern of deformation in central uplifts of Sierra Madera and other well-known cryptoexplosion structures indicates that inward as well as upward movement of strata formed the uplifts. This kind of movement is incompatible with structures not of impact origin with which they have been compared. The structural style of cryptoexplosion structures, together with features that suggest shock deformation, supports the belief that they are the eroded roots of impact craters.

Science

Pore-water chemistry from the ICDP-USGS coer hole in the Chesapeake Bay impact structure--Implications for paleohydrology, microbial habitat, and water resources

We investigated the groundwater system of the Chesapeake Bay impact structure by analyzing the pore-water chemistry in cores taken from a 1766-m-deep drill hole 10 km north of Cape Charles, Virginia. Pore water was extracted using high-speed centrifuges from over 100 cores sampled from a 1300 m section of the drill hole. The pore-water samples were analyzed for major cations and anions, stable isotopes of water and sulfate, dissolved and total carbon, and bioavailable iron. The results reveal a broad transition between fresh and saline water from 100 to 500 m depth in the post-impact sediment section, and an underlying syn-impact section that is almost entirely filled with brine. The presence of brine in the lowermost post-impact section and the trend in the dissolved chloride with depth suggest a transport process dominated by molecular diffusion and slow, compaction-driven, upward flow. Major ion results indicate residual effects of diagenesis from heating, and a pre-impact origin for the brine. High levels of dissolved organic carbon (6-95 mg/L) and the distribution of electron acceptors indicate an environment that may be favorable for microbial activity throughout the drilled section. The concentration and extent of the brine is much greater than had previously been observed, suggesting its occurrence may be common in the inner crater. However, groundwater flow conditions in the structure may reduce the salt-water-intrusion hazard associated with the brine.

Special Paper of the Geological Society of America

Lithospheric structure across the Transantarctic Mountains constrained by an analysis of gravity and thermal structure

The Transantarctic Mountains demarcate the boundary between the highly extended lithosphere of the West Antarctic Rift System and the Proterozoic East Antarctic Craton. Although the last stage of relief development was in the Eocene, the TAM retain peak elevations in excess of 4500 m. This combination of old age and high relief are difficult to reconcile, and the mechanism(s) responsible for uplift and support of this mountain range remain elusive and controversial. Recent seismic studies provide key constraints on the crustal structure. Here we constrain the lithospheric structure across this boundary by forward modeling of the gravity based on a density structure that reflects the thermal structure. Our results show that the observed very-long wavelength (>500km) gravity anomaly can be modeled by a West Antarctic lithosphere ~60 km thick, and an East Antarctic lithosphere ~250 km thick. In addition, the gravity anomaly associated with the TAM can be modeled by including the thermal effects of heat producing elements concentrated in the crust.

Open-File Report

Structure of the Hat Creek graben region: Implications for the structure of the Hat Creek graben and transfer of right-lateral shear from the Walker Lane north of Lassen Peak, northern California, from gravity and magnetic anomalies

Interpretation of magnetic and new gravity data provides constraints on the geometry of the Hat Creek Fault, the amount of right-lateral offset in the area between Mt. Shasta and Lassen Peak, and confirmation of the influence of pre-existing structure on Quaternary faulting. Neogene volcanic rocks coincide with short-wavelength magnetic anomalies of both normal and reversed polarity, whereas a markedly smoother magnetic field occurs over the Klamath Mountains and its Paleogene cover. Although the magnetic field over the Neogene volcanic rocks is complex, the Hat Creek Fault, which is one of the most prominent normal faults in the region and forms the eastern margin of the Hat Creek Valley, is marked by the eastern edge of a north-trending magnetic and gravity high 20-30 km long. Modeling of these anomalies indicates that the fault is a steeply dipping (~75-85°) structure. The spatial relationship of the fault as modeled by the potential-field data, the youngest strand of the fault, and relocated seismicity suggests that deformation continues to step westward across the valley, consistent with a component of right-lateral slip in an extensional environment. Filtered aeromagnetic data highlight a concealed magnetic body of Mesozoic or older age north of Hat Creek Valley. The body’s northwest margin strikes northeast and is linear over a distance of ~40 km. Within the resolution of the aeromagnetic data (1-2 km), we discern no right-lateral offset of this body. Furthermore, Quaternary faults change strike or appear to end, as if to avoid this concealed magnetic body and to pass along its southeast edge, suggesting that pre-existing crustal structure influenced younger faulting, as previously proposed based on gravity data.

California, Nevada

Geologic structure and occurrence of gas in part of southwestern New York. Part 2. Subsurface structure in part of southwestern New York and mode of occurrence of gas in the Medina group

Based on the records of several hundred deep wells, contour maps have been prepared showing the monoclinal structure of part of western New York, and isopach lines have been drawn showing the westward convergence of the rocks. The mode of occurrence of natural gas in the Medina group is briefly discussed. The location of the gas fields has not been determined by structural traps, but rather stratigraphy and lithology are the controlling factors in trapping the gas, which occurs in porous lenses and streaks of sandstone sealed within impermeable beds. This mode of occurrences of the Medina gas makes the search for new fields in western New York more hazardous than in most natural gas regions. As structure has not formed traps for the gas there is no surface guide to favorable sites for testing, and new fields are found by haphazard drilling. It would be helpful, however, when wells are sunk, to study the lithology of the gas-bearing zone by an examination of the drill cuttings and core samples of the sand and to have electrical logs made of the wells to obtain measurements of permeability and porosity. Such tests may indicate the direction of greatest porosity in which the sand is more likely to contain gas.

New York

Petrography, structure, age, and thermal history of granitic coastal plain basement in the Chesapeake Bay impact structure, USGS-NASA Langley core, Hampton, Virginia

The USGS-NASA Langley corehole at Hampton , Va., was drilled in 2000 and was the first corehole to reach coastal plain basement in the late Eocene Chesapeake Bay impact structure . The Langley core provided samples of granite that had been concealed by 626.3 meters (2,054.7 feet) of preimpact, synimpact, and postimpact sediments. The granite, here named the Langley Granite, is pale red, medium grained, massive, and homogeneous in composition and fabric. It has a peraluminous composition (alumina saturation index 1.1) and a seriate-inequigranular, hypidiomorphic, isotropic fabric. A pervasive secondary mineral assemblage of chlorite + albite + clinozoisite is consistent with either deuteric alteration or lower greenschist-facies metamorphism. Chlorite, the principal mafic mineral, occurs as tabular masses that suggest pseudomorphous replacement of biotite. The top of the granite is weathered but not saprolitized and is nonconformably overlain by Lower Cretaceous clastic sediments. A SHRIMP 206 Pb/ 238 U weighted average zircon age of 612±10 Ma (2σ) indicates Neoproterozoic crystallization of the Langley Granite. The 40 Ar/ 39 Ar ages of microcline and plagioclase are consistent with regional cooling and uplift after the late Paleozoic Alleghanian orogeny. Zircon and apatite fission-track cooling ages of 375±44 Ma and 184±32 Ma (2σ), respectively, indicate no discernible impact -related thermal disturbance at the Langley corehole location in the annular trough of the structure about 19 kilometers (12 miles) outside the margin of the central crater. Modeling the apatite fission-track data places upper limits on the impact -related heating at this location. For an impact -related thermal disturbance equivalent to a modeled thermal spike having a duration of 1 to 0.1 million years, temperatures in this part of the impact structure could not have been higher than about 100°C-120°C. Most fractures, faults, and veins in the Langley Granite contain lower greenschist-facies minerals and are inferred to predate the impact . No shock-metamorphosed minerals or other features clearly attributable to the impact were found in the granite. Studies of the granite provide a glimpse into the nature of crystalline terranes beneath the Atlantic Coastal Plain and Chesapeake Bay and provide limits on the geographic extent of impact -generated shock and thermal effects.

Chesapeake Bay