SEARCH · Geology Reports
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Post-earthquake financial decision-making is a realm beyond that of many people. In the immediate aftermath of a damaging earthquake, billions of dollars of relief, recovery, and insurance funds are in the balance through new financial instruments that allow those with resources to hedge against disasters and those at risk to limit their earthquake losses and receive funds for response and recovery.
The catastrophic Christ Church Earthquake is a strong reminder to engineers and scientists of the hazards pose by fault lines, both mapped and unknown, near major cities. In February 2011, the relatively moderate earthquake that struck the cities of Christchurch and Lyttleton in the Canterbury region of New Zealand's South Island surprised many with its destructive power. The magnitude 6.2 temblor killed 181 people, 118 of whom were killed in the collapse of a single building in the city center. The quake damaged or destroyed more than 100,000 buildings. It was the deadliest quake to strike the nation in 80 years-since the 1931 earthquake that struck the Napier and Hastings area of the North Island. The Christchurch quake was part of the aftershock sequence following the September 2010 magnitude 7.1 earthquake near Darfield, 40 kilometers west of the city. The Darfield earthquake was in a sparsely populated area, causing to loss of life. By contrast, the Christchurch earthquake was generated on a fault in close proximity to the city.
Observational networks enhance real‐time situational awareness for emergency and water resource management during extreme weather events. We present examples of how a diverse, multitiered observational network in California provided insights into hydrometeorological processes and impacts during a 3‐day atmospheric river storm centered on 14 February 2019. This network, which has been developed over the past two decades, aims to improve understanding and mitigation of effects from extreme storms influencing water resources and natural hazards. We combine atmospheric reanalysis output and additional observations to show how the network allows: (1) the validation of record cool season precipitable water observations over southern California; (2) the identification of phenomena that produce natural hazards and present difficulties for short‐term weather forecast models, such as extreme precipitation amounts and snow level variability; (3) the use of soil moisture data to improve hydrologic model forecast skill in northern California's Russian River basin; and (4) the combination of meteorological data with seismic observations to identify when a large avalanche occurred on Mount Shasta. This case study highlights the value of investments in diverse observational assets and the importance of continued support and synthesis of these networks to characterize climatological context and advance understanding of processes modulating extreme weather.
Executive Summary The mission of the U.S. Geological Survey (USGS) in natural hazards is to develop and apply hazard science to help protect the safety, security, and economic well-being of the Nation. The costs and consequences of natural hazards can be enormous, and each year more people and infrastructure are at risk. USGS scientific research—founded on detailed observations and improved understanding of the responsible physical processes—can help to understand and reduce natural hazard risks and to make and effectively communicate reliable statements about hazard characteristics, such as frequency, magnitude, extent, onset, consequences, and where possible, the time of future events. To accomplish its broad hazard mission, the USGS maintains an expert workforce of scientists and technicians in the earth sciences, hydrology, biology, geography, social and behavioral sciences, and other fields, and engages cooperatively with numerous agencies, research institutions, and organizations in the public and private sectors, across the Nation and around the world. The scientific expertise required to accomplish the USGS mission in natural hazards includes a wide range of disciplines that this report refers to, in aggregate, as hazard science. In October 2010, the Natural Hazards Science Strategy Planning Team (H–SSPT) was charged with developing a long-term (10-year) Science Strategy for the USGS mission in natural hazards. This report fulfills that charge, with a document hereinafter referred to as the Strategy, to provide scientific observations, analyses, and research that are critical for the Nation to become more resilient to natural hazards. Science provides the information that decisionmakers need to determine whether risk management activities are worthwhile. Moreover, as the agency with the perspective of geologic time, the USGS is uniquely positioned to extend the collective experience of society to prepare for events outside current memory. The USGS has critical statutory and nonstatutory roles regarding floods, earthquakes, tsunamis, landslides, coastal erosion, volcanic eruptions, wildfires, and magnetic storms—the hazards considered in this plan. There are numerous other hazards of societal importance that are considered either only peripherally or not at all in this Strategy because they are either in another of the USGS strategic science plans (such as drought) or not in the overall mission of the USGS (such as tornados).
The mission of the U.S. Geological Survey (USGS) in natural hazards is to develop and apply hazard science to help protect the safety, security, and economic well-being of the Nation. The costs and consequences of natural hazards can be enormous, and each year more people and infrastructure are at risk. USGS scientific research—founded on detailed observations and improved understanding of the responsible physical processes—can help to understand and reduce natural hazard risks and to make and effectively communicate reliable statements about hazard characteristics, such as frequency, magnitude, extent, onset, consequences, and where possible, the time of future events. To accomplish its broad hazard mission, the USGS maintains an expert workforce of scientists and technicians in the earth sciences, hydrology, biology, geography, social and behavioral sciences, and other fields, and engages cooperatively with numerous agencies, research institutions, and organizations in the public and private sectors, across the Nation and around the world. The scientific expertise required to accomplish the USGS mission in natural hazards includes a wide range of disciplines that this report refers to, in aggregate, as hazard science. In October 2010, the Natural Hazards Science Strategy Planning Team (H–SSPT) was charged with developing a long-term (10-year) Science Strategy for the USGS mission in natural hazards. This report fulfills that charge, with a document hereinafter referred to as the Strategy, to provide scientific observations, analyses, and research that are critical for the Nation to become more resilient to natural hazards. Science provides the information that decisionmakers need to determine whether risk management activities are worthwhile. Moreover, as the agency with the perspective of geologic time, the USGS is uniquely positioned to extend the collective experience of society to prepare for events outside current memory. The USGS has critical statutory and nonstatutory roles regarding floods, earthquakes, tsunamis, landslides, coastal erosion, volcanic eruptions, wildfires, and magnetic storms—the hazards considered in this plan. There are numerous other hazards of societal importance that are considered either only peripherally or not at all in this Strategy because they are either in another of the USGS strategic science plans (such as drought) or not in the overall mission of the USGS (such as tornados).
Seismic hazard assessments that are based on a variety of data and the best available science, coupled with rapid synthesis of real-time information from continuous monitoring networks to guide post-earthquake response, form a solid foundation for effective earthquake loss reduction. With this in mind, the Earthquake Hazards Program (EHP) of the U.S. Geological Survey (USGS) Natural Hazards Mission Area (NHMA) engages in a variety of undertakings, both established and emergent, in order to provide high quality products that enable stakeholders to take action in advance of and in response to earthquakes. Examples include the National Seismic Hazard Model (NSHM), development of tools for improved situational awareness such as earthquake early warning (EEW) and operational earthquake forecasting (OEF), research about induced seismicity, and new efforts to advance comprehensive subduction zone science and monitoring. Geodetic observations provide unique and complementary information directly relevant to advancing many aspects of these efforts (fig. 1). EHP scientists have long leveraged geodetic data for a range of influential studies, and they continue to develop innovative observation and analysis methods that push the boundaries of the field of geodesy as applied to natural hazards research. Given the ongoing, rapid improvement in availability, variety, and precision of geodetic measurements, considering ways to fully utilize this observational resource for earthquake loss reduction is timely and essential. This report presents strategies, and the underlying scientific rationale, by which the EHP could achieve the following outcomes: The EHP is an authoritative source for the interpretation of geodetic data and its use for earthquake loss reduction throughout the United States and its territories. The USGS consistently provides timely, high quality geodetic data to stakeholders. Significant earthquakes are better characterized by incorporating geodetic data into USGS event response products and by expanded use of geodetic imaging data to assess fault rupture and source parameters. Uncertainties in the NSHM, and in regional earthquake models, are reduced by fully incorporating geodetic data into earthquake probability calculations. Geodetic networks and data are integrated into the operations and earthquake information products of the Advanced National Seismic System (ANSS). Earthquake early warnings are improved by more rapidly assessing ground displacement and the dynamic faulting process for the largest earthquakes using real-time geodetic data. Methodology for probabilistic earthquake forecasting is refined by including geodetic data when calculating evolving moment release during aftershock sequences and by better understanding the implications of transient deformation for earthquake likelihood. A geodesy program that encompasses a balanced mix of activities to sustain missioncritical capabilities, grows new competencies through the continuum of fundamental to applied research, and ensures sufficient resources for these endeavors provides a foundation by which the EHP can be a leader in the application of geodesy to earthquake science. With this in mind the following objectives provide a framework to guide EHP efforts: Fully utilize geodetic information to improve key products, such as the NSHM and EEW, and to address new ventures like the USGS Subduction Zone Science Plan. Expand the variety, accuracy, and timeliness of post-earthquake information products, such as PAGER (Prompt Assessment of Global Earthquakes for Response), through incorporation of geodetic observations. Determine if geodetic measurements of transient deformation can significantly improve estimates of earthquake probability. Maintain an observational strategy aligned with the target outcomes of this document that includes continuous monitoring, recording of ephemeral observations, focused data collection for use in research, and application-driven data processing and analysis systems. Collaborate on research, development, and operation of affordable, high-precision seafloor geodetic methods that improve earthquake forecasting and event response. Advance computational techniques and instrumentation to enable use of strategies like repeat-pass imagery and low-cost geodetic sensors for earthquake response, monitoring, and research. Engage stakeholders and collaborate with partner institutions to foster operational and research objectives and to safeguard the continued health of geodetic infrastructure upon which we mutually depend. Maintaining a vibrant internal research program provides the foundation by which the EHP can remain an effective and trusted source for earthquake science. Exploiting abundant new data sources, evaluating and assimilating the latest science, and pursuing novel avenues of investigation are means to fulfilling the EHP’s core responsibilities and realizing the important scientific advances envisioned by its scientists. Central to the success of such a research program is engaging personnel with a breadth of competencies and a willingness and ability to adapt these to the program’s evolving priorities, enabling current staff to expand their skills and responsibilities, and planning holistically to meet shared workforce needs. In parallel, collaboration with external partners to support scientific investigations that complement ongoing internal research enables the EHP to strengthen earthquake information products by incorporating alternative perspectives and approaches and to study topics and geographic regions that cannot be adequately covered internally. With commensurate support from technical staff who possess diverse skills, including engineering, information technology, and proficiency in quantitative analysis combined with basic geophysical knowledge, the EHP can achieve the geodetic outcomes identified in this document.
The National Geophysical Data Center (NGDC), a part of the National Oceanic and Atmospheric Administration, has been given the task of collecting, managing, and disseminating the great mass of inofmation produced by scientific observations of the geophysical environment. This article describes NGDC data bases that speifically relate to natural hazards.
Data from Earth observation systems are used extensively in managing and monitoring natural resources, natural hazards, and the impacts of climate change, but the value of such data can be difficult to estimate, particularly when it is available at no cost. Assessing the socioeconomic and scientific value of these data provides a better understanding of the existing and emerging research, science, and applications related to this information and contributes to the decision making process regarding current and future Earth observation systems. Recent USGS research on Landsat data has advanced the literature in this area by using a variety of methods to estimate value. The results of a 2012 survey of Landsat users, a 2013 requirements assessment, and 2013 case studies of applications of Landsat imagery are discussed.
The 11 October 1918 devastating tsunami in northwest Puerto Rico had been used as an example for earthquake‐induced landslide tsunami hazard. Three pieces of evidence pointed to a landslide as the origin of the tsunami: the discovery of a large submarine landslide scar from bathymetry data collected by shipboard high‐resolution multibeam sonar, reported breaks of submarine cable within the scar, and the fit of tsunami models to flooding observations. Newly processed seafloor imagery collected by remotely operated vehicle (ROV) show, however, pervasive Fe–Mn crust (patina) on the landslide walls and floor, indicating that the landslide scar is at least several hundred years old. C 14 "> 14 C dates of sediment covering the landslide floor verify this interpretation. Although we have not searched the region systematically for an alternative tsunami source, we propose a possible source—a two‐segment normal‐fault rupture along the eastern wall of Mona rift. The proposed fault location matches the published normal faults with steep bathymetry and is close to the International Seismological Center–Global Earthquake Model catalog locations of the 1918 mainshock and aftershocks. The ROV observations further show fresh vertical slickensides and rock exposure along the proposed fault trace. Hydrodynamic models from an M w "> M w 7.2 earthquake rupture along the eastern wall of the rift faithfully reproduce the reported tsunami amplitudes, polarities, and arrival times. Our analysis emphasizes the value of close‐up observations and physical samples to augment remote sensing data in natural hazard studies.
Modeling strong ground motions from great subduction zone earthquakes is one of the great challenges of computational seismology. To separate the rupture characteristics from complexities caused by 3D sub-surface geology requires an extraordinary data set such as provided by the recent Mw9.0 Tohoku-Oki earthquake. Here we combine deterministic inversion and dynamically guided forward simulation methods to model over one thousand high-rate GPS and strong motion observations from 0 to 0.25 Hz across the entire Honshu Island. Our results display distinct styles of rupture with a deeper generic interplate event (~Mw8.5) transitioning to a shallow tsunamigenic earthquake (~Mw9.0) at about 25 km depth in a process driven by a strong dynamic weakening mechanism, possibly thermal pressurization. This source model predicts many important features of the broad set of seismic, geodetic and seafloor observations providing a major advance in our understanding of such great natural hazards.
We evaluated the spatial and seasonal responses of precipitation in the Ganges and Brahmaputra basins as modulated by the El Niño Southern Oscillation (ENSO) and Indian Ocean Dipole (IOD) modes using Global Precipitation Climatology Centre (GPCC) full data reanalysis of monthly global land-surface precipitation data from 1901 to 2010 with a spatial resolution of 0.5° × 0.5°. The GPCC monthly total precipitation climatology targeting the period 1951–2000 was used to compute gridded monthly anomalies for the entire time period. The gridded monthly anomalies were averaged for the years influenced by combinations of climate modes. Occurrences of El Niño alone significantly reduce (88% of the long-term average (LTA)) precipitation during the monsoon months in the western and southeastern Ganges Basin. In contrast, occurrences of La Niña and co-occurrences of La Niña and negative IOD events significantly enhance (110 and 109% of LTA in the Ganges and Brahmaputra Basin, respectively) precipitation across both basins. When El Niño co-occurs with positive IOD events, the impacts of El Niño on the basins' precipitation diminishes. When there is no active ENSO or IOD events (occurring in 41 out of 110 years), precipitation remains below average (95% of LTA) in the agriculturally intensive areas of Haryana, Uttar Pradesh, Rajasthan, Madhya Pradesh, and Western Nepal in the Ganges Basin, whereas precipitation remains average to above average (104% of LTA) across the Brahmaputra Basin. This pattern implies that a regular water deficit is likely, especially in the Ganges Basin, with implications for the agriculture sector due to its reliance on consistent rainfall for successful production. Historically, major droughts occurred during El Niño and co-occurrences of El Niño and positive IOD events, while major flooding occurred during La Niña and co-occurrences of La Niña and negative IOD events in the basins. This observational analysis will facilitate well-informed decision making in minimizing natural hazard risks and climate impacts on agriculture, and supports development of strategies ensuring optimized use of water resources in best management practice under a changing climate.
Our understanding of fault mechanics and earthquake processes remains limited, largely due to minimal direct observations near active faults at seismogenic depths. This lack of data restricts our ability to accurately assess and mitigate both natural and human-induced seismic hazards. However, recent advancements in drilling capabilities and downhole sensing technologies offer an opportunity: the ability to observe the physical conditions within a volume near active fault zones. In this contribution, we highlight how scientific drilling can provide access to the near-fault environment, enabling measurements of the stress, temperature, fluid pressure, and rock properties at depths where ruptures initiate, propagate, and arrest. These observations are essential to refine models of earthquake nucleation and dynamic rupture, bridging gaps between laboratory experiments, numerical simulations, and surface observations. These insights can advance fundamental understanding in earthquake science but also support the development of more effective seismic hazard assessments and risk mitigation strategies.
Executive Summary Managers of our Nation’s resources face unprecedented challenges driven by the convergence of increasing, competing societal demands and a changing climate that affects the stability, vulnerability, and predictability of those resources. To help meet these challenges, the scientific community must take advantage of all available technologies, data, and integrative Earth systems modeling capacity to better inform resource and risk management decisions. This is the overarching goal of the U.S. Geological Survey (USGS) Earth Monitoring, Analysis, and Prediction (EarthMAP) vision: “By 2030, the USGS will deliver well integrated observations and predictions of the future state of natural systems—water, ecosystems, energy, minerals, hazards—at regional and national scales, working primarily with federal, state, and academic partners to develop and operate the capability” (U.S. Geological Survey, 2021). Providing more integrated Earth systems science and actionable information to decision makers, stakeholders, and the public requires a better understanding of the depth and distribution of existing capacity (capabilities, tools, and techniques) across the Bureau. Identifying existing capacity is also a critical first step toward gap analysis and targeted investments to increase capacity over time. The USGS formed a Capacity Assessment Team (CAT) and charged it with (1) conducting a Request for Information (RFI) to identify existing USGS expertise and activities supportive of integrated and predictive science to inform decision making, (2) developing a strategy and proof-of-concept for a continuously updated capacity assessment capability, and (3) identifying lessons learned to inform development of best practices for future capacity assessment efforts. The RFI took the form of a survey, with content guided by the science and technology needs identified in a USGS report titled “Grand Challenges for Integrated U.S. Geological Survey Science—A Workshop Report” (Jenni and others, 2017). The 44-question survey provided respondents the ability to rate their level of experience with a suite of priority disciplines, analysis and modeling approaches, technologies, and stakeholder engagement strategies and to enter optional narrative text for supporting context. An introductory portion focused on general science capacity assessment, followed by three sections targeting capabilities related to the foundational components of EarthMAP: (1) data and information integration, (2) integrated predictive science, and (3) actionable information. The survey results provided a high-level snapshot of USGS capacity in the targeted areas. Respondents (1,035 individuals) represented approximately 13 percent of the USGS across all mission areas and regions. Seventy-four percent of the respondents held a science-focused position title and the remainder had position titles in information technology, computer science, management, administrative, or other (contractors, volunteers, emeritus, and unknown). To provide greater insight into respondent capabilities and activities, information from the U.S. Department of the Interior and USGS enterprise information systems were used to further characterize topical expertise and organizational associations of survey respondents. To address the ongoing need to assess the Bureau’s capacity to address integrated predictive science priorities, the CAT developed a software-based proof-of-concept called the Integrated Science Assessment Information Database (iSAID) for assembling various information sources together toward making the full extent of USGS capabilities and scientific assets available for routine capacity assessment. This proof-of-concept is intended to serve as a catalyst for further development. The process of implementing the EarthMAP capacity assessment survey, analyzing survey responses, and developing the proof-of-concept resulted in lessons learned, findings, and recommendations. Example scenarios throughout the report demonstrate how capacity assessment data can inform science planning. Three overarching findings and recommendations are: (1) Finding: Capacity is limited in some critical disciplines, skills, and technology applications, but “sufficient” depends on the question and the need relative to availability at a given point in time. Recommendation: Develop an on-demand capacity assessment framework that enables rapid identification and evaluation of existing and available expertise to support decision needs as they arise. (2) Finding: Institutional barriers and lack of awareness constrain the ability of USGS staff to adopt new technologies, collaborate across administrative boundaries, and deliver actionable information to stakeholders in a timely manner. However, these barriers are not universally experienced. Recommendation: Pursue more targeted inquiries to clarify which institutional barriers are obstructing the adoption of new technologies and approaches or the sharing of expertise and equipment across organizational and regional boundaries. These inquiries should inform USGS leadership, mission areas, and regions whether policies can be revised or whether a lack of understanding is creating perceived obstacles. Highlight cases when staff have successfully adopted new technologies and approaches to advance EarthMAP priorities and provide actionable information in a timely manner to spread awareness of how perceived obstacles can be navigated and overcome when appropriate. (3) Finding: Examples of people and projects integrating across disciplines and scales and applying advanced approaches to meet complex stakeholder needs exist. Such examples provide transfer value across the spectrum from approach to decision making. Many projects, already underway, appear to meet elements of the EarthMAP vision, and the USGS has people who can provide leadership in multiple types of specific integrated science efforts. Recommendation: Use these findings as a starting point for near-term strategic planning for integrated science. Highlight, incentivize, and build on existing interdisciplinary predictive science and information delivery activities across the USGS to advance toward further realization of an EarthMAP capacity. The CAT efforts to develop and assess existing USGS capacity to advance the EarthMAP vision revealed a fundamental challenge for not only this effort but any effort to assess existing capacity: A considerable amount of thought, time, and effort is required to survey and assess capabilities and tools available to support a given need, yet best results are still likely to provide an incomplete assessment. To better meet the frequent need to assess capabilities, tools, products, and projects that address an expressed strategic priority, the CAT proposes the concept of an on-demand capacity assessment framework supported by a software package that dynamically pulls and integrates information from existing USGS information systems and public domain registries. Although existing USGS enterprise information systems currently lack the structure, cross-system consistency, interoperability, and stability to support a continuously updated capacity assessment capability, we identify reasonable near-term steps to improve the utility of information gathered on expertise and project capacity and to improve the consistency and completeness of information and the ability of USGS systems to share that information. The ability to search and characterize this information will make future assessments of capacity faster, more complete, more efficient, and more targeted. This approach would grow the Bureau’s capacity knowledge over time, iteratively improving the ability to access, leverage, and synthesize existing capabilities and assets as well as identify and fill critical gaps. The greatest promise for developing integrated science could lie in linking across existing projects and expertise to create a multi-project capacity for addressing large, complex environmental issues.
Caldera-forming eruptions are among Earths most hazardous natural phenomena, yet the architecture of subcaldera magma reservoirs and the conditions that trigger collapse are poorly understood. Observations from the formation of a 0.8cubic kilometer basaltic caldera at Klauea Volcano in 2018 included the draining of an active lava lake, which provided a window into pressure decrease in the reservoir. We show that failure began after <4% of magma was withdrawn from a shallow reservoir beneath the volcanos summit, reducing its internal pressure by ~17 megapascals. Several cubic kilometers of magma were stored in the reservoir, and only a fraction was withdrawn before the end of the eruption. Thus, caldera formation may begin after withdrawal of only small amounts of magma and may end before source reservoirs are completely evacuated.
Increased volcanic activity on Mount Baker, which began in March 1975, represents the greatest known activity of a Cascade Range volcano since eruptions at Lassen Peak, Calif. during 1914-17. Emissions of dust and increased emanations of steam, other gases, and heat from the Sherman Crater area of the mountain focused attention on the possibility of hazardous events, including lava flows, pyroclastic eruptions, avalanches, and mudflows. However, the greatest undesirable natural results that have been observed after one year of the increased activity are an increase in local atmospheric pollution and a decrease in the quality of some local water resources, including Baker Lake. Baker Lake, a hydropower reservoir behind Upper Baker Dam, supports a valuable fishery resource and also is used for recreation. The lake's feedwater is from Baker River and many smaller streams, some of which, like Boulder Creek, drain parts of Mount Baker. Boulder Creek receives water from Sherman Crater, and its channel is a likely route for avalanches or mudflows that might originate in the crater area. Boulder Creek drains only about 5 percent of the total drainage area of Baker Lake, but during 1975 carried sizeable but variable loads of acid and dissolved minerals into the lake. Sulfurous gases and the fumarole dust from Sherman Crater are the main sources for these materials, which are brought into upper Boulder Creek by meltwater from the crater. In September 1973, before the increased volcanic activity, Boulder Creek near the lake had a pH of 6.0-6.6; after the increase the pH ranged as low as about 3.5. Most nearby streams had pH values near 7. On April 29, in Boulder Creek the dissolved sulfate concentration was 6 to 29 times greater than in nearby creeks or in Baker River; total iron was 18-53 times greater than in nearby creeks; and other major dissolved constituents generally 2 to 7 times greater than in the other streams. The short-term effects on Baker Lake of the acidic, mineral-rich inflow depend mainly on: (1) the rate of flow and the character of Boulder Creek water at the time; (2) the relative rate of inflow of the feedwater from other streams; and (3) whether the reservoir is temperature-stratified (summer) or homothermal (winter). A distinct layer of Boulder Creek water was found in the lake in September 1975 extending at least 0.3 miles (.5 km) downreservoir. The greatest opportunity for water from Boulder Creek to persist as a layer and extend farthest before mixing with the other reservoir water is when Baker Lake is strongly stratified and Boulder Creek flow rate is large in relation to other feedwater. Baker Lake probably could assimilate indefinitely the acid loads measured during 1975, by dilution, chemical neutralization, and buffering of the acid-rich Boulder creek water. Minor elements found in Boulder Creek water included arsenic, selenium, and mercury; however, none of these would reach the limits recommended by the U.S. Environmental Protection Agency for public water supplies unless their concentrations increased to several times the amounts found during this study. Under the prevailing conditions, acid-rich Boulder Creek water apparently cannot accumulate as a pool, or persist as a layer long enough to reach Upper Baker Dam and attack the concrete. However, even if the acid load from Boulder Creek does not greatly increase, occasional light fish mortalities may result near the mouth of the creek. Greater acid and mineral loads, resulting from further increases in volcanic activity or other possible causes, could be more harmful, especially to the fish. Continued monitoring of Boulder Creek flow and water quality is needed to rapidly any changes in conditions at Sherman Crater, and to provide warning of possible greater impacts on Baker Lake from any future increases in Mount Baker activity.
The Landsat program provides the longest continuous global record of thermal infrared observations of the Earth's surface, underpinning critical applications in climate monitoring, water resources, ecosystem dynamics, urban heat analysis, and natural hazard assessment. The release of a global inventory of Landsat Collection 2 Level 2 surface temperature products by the U.S. Geological Survey (USGS) marked a major milestone in operational provision of Landsat thermal infrared analysis-ready data. Ongoing validations and community uses of Collection 2 have identified opportunities to further improve accuracy, uncertainty characterization, and emissivity correction across diverse atmospheric and surface conditions. In preparation for the planned Landsat Collection 3 reprocessing of the Landsat data record in the late 2020s, the USGS is implementing a coordinated set of enhancements to the Level 2 surface temperature products. These include revised emissivity estimation that leverages external datasets, improved atmospheric characterization and uncertainty propagation, expanded dynamic range for high temperature targets, consideration of split window atmospheric correction algorithm for Landsat 8 and 9, and decoupling of thermal infrared processing from visible to shortwave infrared constraints to enable surface temperature retrievals under low or no solar illumination conditions. These changes are designed to improve product quality and consistency across the Landsat record. Beyond near-term performance gains, the Collection 3 design establishes a scalable processing architecture to accommodate the expanded spectral and radiometric measurement capabilities of the forthcoming Landsat 10 mission. By preserving continuity across the Landsat 4–9 record while enabling future algorithm evolution, Landsat Collection 3 will provide a foundation for long-term, multi-decadal Earth system thermal infrared observations.
Cyanobacteria (also referred to as blue-green algae) are naturally present members of phytoplankton assemblages that may detract from beneficial uses of water because some strains produce cyanotoxins that pose health hazards to people and animals. Cyanobacteria populations observed in Willow Creek Lake during 2012 through 2014 were compared to external nutrient loading from the Willow Creek drainage basin and several other physicochemical properties within the lake, including internal nutrient loading. This report is part of a cooperative study between the U.S. Geological Survey, the Lower Elkhorn Natural Resources District, the Nebraska Department of Environmental Quality, the Nebraska Game and Parks Commission, the Nebraska Department of Natural Resources, the Nebraska Environmental Trust, and the University of Nebraska–Lincoln. Cyanobacteria concentrations were quantified using weekly microcystin sampling, intermittent algal taxonomy, and hourly in-situ phycocyanin measurements. External and internal nutrient loads, lake water physical characteristics, and local meteorological conditions were evaluated as potential causes of cyanobacterial blooms. A water balance approach that estimated Willow Creek Lake inflow and outflow volumes identified Willow Creek as the major inflow and groundwater flux as the major outflow for the lake. Nutrient concentrations from several water sources were quantified and combined with flow volumes to compute nutrient loads during the study period. Surface flows contributed most external nutrients to the lake, whereas lake nutrients were exported during groundwater losses. The main stem of Willow Creek accounted for most nitrate loads to the lake, whereas total Kjeldahl nitrogen, total phosphorus, and phosphate loads to the lake were more evenly distributed between Willow Creek and the North Tributary, a smaller drainage. Sediment core incubations determined internal phosphorus loading was a negligible component of the overall nutrient load to the lake. Cyanobacterial responses were compared to nutrient loads and other external factors that could potentially affect algal growth. A series of univariate comparisons were made by plotting those factors against phycocyanin using biweekly summaries of each and a multivariate model that incorporated seasonality and cumulative nitrate loading. Although the multivariate model only incorporated cumulative nitrate, both nitrogen and phosphorus are likely contributing to cyanobacterial population growth, and management efforts may benefit from the recognition of differences in nutrient loading characteristics between the monitored basins.