Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Mining Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources
USGS1999

Mining geology of the Pond Creek seam, Pikeville Formation, Middle Pennsylvanian, in part of the Eastern Kentucky Coal Field, USA

The Pond Creek seam is one of the leading producers of coal in the Eastern Kentucky Coal Field. The geologic factors that affect mining were investigated in several underground mines and categorized in terms of coal thickness, coal quality, and roof control. The limits of mining and thick coal are defined by splitting along the margin of the coal body. Within the coal body, local thickness variation occurs because of (1) leader coal benches filling narrow, elongated depressions, (2) rider coal benches coming near to or merging with the main bench, (3) overthrust coal benches being included along paleochannel margins, (4) cutouts occuring beneath paleochannels, and (5) very hard and unusual rock partings occuring along narrow, elongated trends. In the study area, the coal is mostly mined as a compliance product: sulfur contents are less than 1% and ash yields are less than 10%. Local increases in sulfur occur beneath sandstones, and are inferred to represent post-depositional migration of fluids through porous sands into the coal. Run-of-mine quality is also affected by several mine-roof conditions and trends of densely concentrated rock partings, which lead to increased in- and out-of-seam dilution and overall ash content of the mined coal. Roof control is largely a function of a heterolithic facies mosaic of coastal-estuarine origin, regional fracture trends, and unloading stress related to varying mine depth beneath the surface. Lateral variability of roof facies is the rule in most mines. The largest falls occur beneath modern valleys and parallel fractures, along paleochannel margins, within tidally affected 'stackrock,' and beneath rider coals. Shale spalling, kettlebottoms, and falls within other more isolated facies also occur. Many of the lithofacies, and falls related to bedding weaknesses within or between lithofacies, occur along northeast-southwest trends, which can be projected in advance of mining. Fracture-related falls occur independently of lithofacies trends along northwest-southeast trends, especially beneath modern valleys where overburden thickness decreases sharply. Differentiating roof falls related to these trends can aid in predicting roof quality in advance of mining.The Pond Creek-Lower Elkhorn seam has been an important exploration target because it typically has very low sulfur contents and ash yields. Geologic research in several large Pond Creek mines suggested variability in roof quality and coal thickness. Due to mine access, geologic problems encountered during mining are documented and described.

International Journal of Coal Geology↗
USGS1937

Isometric block diagrams in mining geology

In the past five years members of the Geological Survey have gained experience in making isometric block diagrams of mines and mining districts as well as of surface features. This paper presents nothing new, but aims to assemble scattered information on a much neglected method of geological illustration. Plotting mine workings on isometric paper is the usual method but is extremely time-consuming. For most purposes the use of some form of isometric pantograph greatly lessens the labor of constructing the diagram. The devices of Dufour, Wentworth, Wilson, and Van der Hoop are described

Economic Geology↗
USGS2001

Eagle Mountain Mine: Geology of the former Kaiser Steel Operation in Riverside County, California

This investigation of the Eagle Mountain Mine area, though cursory, revealed new structural, alteration, and stratigraphic relations. Eagle Mountain ores were previously an important source of iron to the western U. S. Ore (where fresh) is magnetite-pyrite rock forming two stratabound horizons virtually continuous for 11 km. Gneissic basement rocks are overlain by two sedimentary units, separated by unconformities. The lower unit contains carbonate rocks and quartzite; the "vitreous quartzite" of previous workers, however, is an alteration feature rather than a stratigraphic one. The upper unit contains thick conglomerates. This layered sequence of rocks is deformed into a west-plunging anticline. Intrusion by Jurassic quartz monzonite apparently followed this deformation. Quartz monzonite forms a branching network of sills, some of which dilate the contact between the upper and lower sedimentary sequences. Intrusion resulted in extensive, mostly-anhydrous skarns, but stratabound iron ore is just as closely related to some other features: regional alteration of quartz monzonite, with iron ore adjacent to little-altered rocks along the boundary between sodic and potassic domains, the two unconformities, which apparently formed stratigraphic traps for precipitation of stratabound iron ores, a north-facing monoclinal plane between folds, which was preferentially replaced. Iron ore replaces a variety of host rocks along the two unconformities, forming massive to globular bodies, and its mineralogy correlates with deuteric alteration features, not anhydrous skarn. Its pyrite contains as much as 3% cobalt. Iron was only one of five elements that showed mobility in this region on a scale that suggests basic crustal processes. The others in probable order of flux magnitude are silica, magnesium, sodium, and potassium, to form regionally distributed “vitreous quartzite”, dolomite, and secondary feldspars, respectively.

California↗
USGS2016

Mountains, glaciers, and mines—The geological story of the Blue River valley, Colorado, and its surrounding mountains

This report describes, in a nontechnical style, the geologic history and mining activity in the Blue River region of Colorado, which includes all of Summit County. The geologic story begins with the formation of ancient basement rocks, as old as about 1700 million years, and continues with the deposition of sedimentary rocks on a vast erosional surface beginning in the Cambrian Period (about 530 million years ago). This deposition was interrupted by uplift of the Ancestral Rocky Mountains during the late Paleozoic Era (about 300 million years ago). The present Rocky Mountains began to rise at the close of the Mesozoic Era (about 65 million years ago). A few tens of millions years ago, rifting began to form the Blue River valley; a major fault along the east side of the Gore Range dropped the east side down, forming the present valley. The valley once was filled by sediments and volcanic rocks that are now largely eroded. During the last few hundred-thousand years, at least two periods of glaciation sculpted the mountains bordering the valley and glaciers extended down the Blue River valley as far south as present Dillon Reservoir. Discovery of deposits of gold, silver, copper, and zinc in the late 1800s, particularly in the Breckenridge region, brought an influx of early settlers. The world-class molybdenum deposit at Climax, mined since the First World War, reopened in 2012 after a period of closure. The report includes a glossary to explain geologic terms used in the text, and numerous photos, maps, and diagrams illustrate the geologic principles discussed. References for further reading are also included.

Colorado↗
USGS1981

Seismology program; California Division of Mines and Geology

The year 1980 marked the centennial of the California Division of Mines and Geology (CDMG) and a decade of the Division's involvement in seismology. Factors which contributed to the formation of a Seismology Group within CDMG included increased concerns for environmental and earthquake safety, interest in earthquake prediction, the 1971 San Fernando earthquake and the 1973 publication by CDMG of an urban geology master plan for California. Reasons to be concerned about California's earthquake problem are demonstrated by the accompanying table and the figures. Recent seismicity in California, the Southern California uplift reflecting changes in crustal strain, and other possible earthquake precursors have heightened concern among scientific and governmental groups about the possible occurrence of a major damaging earthquake )M>7) in California.

Earthquake Information Bulletin (USGS)↗
USGS2011

Recovery and reprocessing of legacy geophysical data from the archives of the State Company of Geology and Mining (GEOSURV) of Iraq and Iraq Petroleum Company (IPC)

Aeromagnetic data belonging to the State Company of Geology and Mining of Iraq (GEOSURV) have been recovered from magnetic tapes and early paper maps. In 1974 a national airborne survey was flown by the French firm Compagnie General de Geophysique (CGG). Following the survey the magnetic data were stored on magnetic tapes within an air conditioned archive run by GEOSURV. In 1990, the power supply to the archive was cut resulting in the present‐day poor condition of the tapes. Frontier Processing Company and the U.S. Geological Survey (USGS) have been able to recover over 99 percent of the original digital data from the CGG tapes. Preliminary reprocessing of the data yielded a total magnetic field anomaly map that reveals fine structures not evident in available published maps. Successful restoration of these comprehensive, high quality digital datasets obviates the need to resurvey the entire country, thereby saving considerable time and money. These data were delivered to GEOSURV in a standard format for further analysis and interpretation. A parallel effort by GETECH concentrated on recovering the legacy gravity data from the original field data sheets archived by IPC (Iraq Petroleum Company). These data have been compiled with more recent GEOSURV sponsored surveys thus allowing for the first time a comprehensive digital and unified national gravity database to be constructed with full principal facts. Figure 1 shows the final aeromagnetic and gravity data coverage of Iraq. The only part of Iraq lacking gravity and aeromagnetic data coverage is the mountainous areas of the Kurdish region of northeastern Iraq. Joint interpretation of the magnetic and gravity data will help guide future geophysical investigations by GEOSURV, whose ultimate aim is to discover economical mineral and energy resources.

SEG Technical Program Expanded Abstracts↗
USGS1899

Geology and mining industry of the Tintic district, Utah: Section in Nineteenth Annual Report of the United States Geological Survey to the Secretary of the Interior 1897 - 1898: Part III - Economic Geology

The field work upon which this report is based was begun in July, 1897, and continued without interruption until December of the same year. The area studied is approximately 15 miles square and contains 234 square miles. The topographic maps, which are two in number, were prepared under the direction of Mr. R. U. Goode, Mr. S. S. Gannett doing the triangulation and Messrs. Marshall and Griswold the topography in the fall of 1896 and summer of 1897. The mapping is done on two scales; the larger area, approximately 15 miles square, is mapped on a scale of 1: 62,500. This map is designed to form a part of the Geologic Atlas of the United States. The other map represents the portion of the larger area in which the majority of the mines are located. It is on a scale of 1: 9,600, and covers an area of 12 square miles. The work has been greatly facilitated through the assistance rendered by the mining men of the district, among whom special thanks are due to Messrs. G. H. Robinson, W. J. Craig, W. M. Nesbit, and C. H. Blanchard. The chemical work on the ores and country rocks from the district has been done in the laboratory of the Survey by Messrs. H. N. Stokes and George Steiger, and the determination of the fossils collected is to be credited to Mr. G. H. Girty, also of the Geological Survey. In the field work the authors have cooperated constantly on every phase of the varied problems. The same is true for the office work, except that the stratigraphic and economic problems have been the especial studies of Mr. Tower, while the petrologic and remaining problems have been the special studies of Mr. Smith. In pursuance of this system of work the introduction has been written conjointly, Chapter II of Part I and all of Part II have been written by Mr. Tower, and Chapters I and III to VII of Part I by Mr. Smith.

Utah↗
USGS2017

Geology and mining history of the Southeast Missouri Barite District and the Valles Mines, Washington, Jefferson, and St. Francois Counties, Missouri

The Southeast Missouri Barite District and the Valles Mines are located in Washington, Jefferson, and St. Francois Counties, Missouri, where barite and lead ore are present together in surficial and near-surface deposits. Lead mining in the area began in the early 1700’s and extended into the early 1900’s. Hand mining of lead in the residuum resulted in widespread pits (also called shafts or diggings), and there was some underground mining of lead in bedrock. By the 1860’s barite was recovered from the residuum by hand mining, also resulting in widespread diggings, but generally not underground mines in bedrock. Mechanized open-pit mining of the residuum for barite began in the 1920’s. Barite production slowed by the 1980’s, and there has not been any barite mining since 1998. Mechanized barite mining resulted in large mined areas and tailings ponds containing waste from barite mills. The U.S. Environmental Protection Agency (EPA) has determined that lead is present in surface soils in Washington and Jefferson Counties at concentrations exceeding health-based screening levels. Also, elevated concentrations of barium, arsenic, and cadmium have been identified in surface soils, and lead concentrations exceeding the Federal drinking-water standard of 15 micrograms per liter have been identified in private drinking-water wells. Potential sources of these contaminants are wastes associated with barite mining, wastes associated with lead mining, or unmined natural deposits of barium, lead, and other metals. As a first step in helping EPA determine the source of soil and groundwater contamination, the U.S. Geological Survey (USGS), in cooperation with the EPA, investigated the geology and mining history of the Southeast Missouri Barite District and the Valles Mines. Ore minerals are barite (barium sulfate), galena (lead sulfide), cerussite (lead carbonate), anglesite (lead sulfate), sphalerite (zinc sulfide), smithsonite (zinc carbonate), and chalcopyrite (copper-iron sulfide). The Cambrian Potosi Dolomite is the most important formation for the ore deposits, followed by the Eminence Dolomite. Because galena, sphalerite, and barite are less soluble than dolomite, chemical weathering of the ore-bearing dolomite bedrock resulted in the concentration of ore minerals in the residuum. Most of the barite and lead mining was in the residuum, which averages 10 to 15 feet thick. Lead mining by French explorers may have begun in 1719 along Old Mines Creek at Cabanage de Renaudiere, which was followed shortly by the discovery of lead and the development of lead mines at Mine Renault (also called Forche a Renault Mine), Old Mines, and at other places along the Big River, Mineral Fork, and Forche a Renault Creek. Lead mining began sometime between 1775 and 1780 at Mine a Breton, the name of which was later changed to Potosi. Other mining areas were developed in the early part of the 19th century, including Fourche a Courtois (Palmer Mines), the French Diggings, and the Richwoods Mines. Zinc became a valuable resource after the Civil War, and the Valles Mines was an important supplier of zinc as well as lead, with at least some production up until the 1920’s. Lead mining declined in the early part of the 20th century as mining in the Old Lead Belt, Mine La Motte, and the Tri-State District expanded. The earliest lead mines were diggings in the residuum and were round holes (shafts) about 4 feet in diameter dug with pick and shovel about 15–20 feet deep, with drifts dug a short distance laterally from the bottom of the shafts. This mining process was repeated a short distance away until a large area was covered with pits. Some mining in bedrock began by about 1800, with shafts as deep as 170 feet and as much as several hundred feet of lateral drifts. Smelting of the lead ore to elemental lead was first done using a log furnace, which was inefficient; estimates have been made that only about 50 percent of the lead was recovered, and the remainder was lost to the ashes (slags) and to volatilization. Starting in 1798, ash furnaces were used to smelt the ashes from the log furnaces. These two furnaces were worked in tandem for many years but were gradually replaced by other furnaces, including the Scotch hearth. Estimates of lead recovery as high as 80–90 percent have been made for the Scotch hearth. By the mid-1870’s the air furnace was being used, also with estimated lead recovery as high as 80–90 percent. Zinc furnaces were built when zinc became a valuable commodity, but much of the zinc ore was shipped out of the area, either to a smelter in St. Louis, Missouri, or to other smelters. The total lead and zinc production from the Southeast Missouri Barite District and the Valles Mines is estimated at 180,000 tons of lead and 60,000 tons of zinc. An estimated 97,000 tons of lead and an estimated 120,000 tons of zinc were lost during smelting. The estimated losses do not include losses at the mine site during mining and preparation for smelting, such as the loss of fine-grained galena during hand cleaning or the discarding of zinc ore before its value was known, for which no estimates are available. Hand mining for barite in the residuum was active by at least the 1860’s and peaked from 1905 to the 1930’s when several thousand people were engaged in barite mining. Hand mining (diggings) and cleaning of the ore was done in much the same way as earlier lead mining, with the additional use of a rattle box to further clean the barite. Mechanized open-pit mining of old barite diggings began in 1924 to recover barite left behind by hand mining, and washing plants were used to clean the clay from the barite. Hand mining, however, continued to thrive, and washer plants began to close temporarily in 1931; nearly all of the barite produced before 1937 was by hand mining. By the 1940’s, however, all barite mining was mechanized. Mechanized mining used shovels powered by steam, gasoline, or electricity (and by the 1950’s draglines and front-end loaders) to mine the residuum. The ore was loaded onto rail cars (and by the 1940’s, trucks) for shipment to washer plants. Clay was removed from the barite using a log washer, and a jig was used to concentrate the barite. Overflow from the log washers was waste and went to a mud (tailings) pond. The coarse jig tailings went to tailings piles or were used as railroad ballast and, later, to create roads within the mine pit. Some barite was ground, depending on its final use, and some ground barite was bleached using a hot solution of sulfuric acid to remove impurities such as iron minerals and lead sulfide (galena). An earlier bleaching process used lead-lined tanks. Large quantities of water were required for milling the barite; some was recirculated water and the remainder came from dammed streams or was pumped from wells. Tailings and wastewater were impounded behind dikes that were built across small valleys and were increased in height as necessary using washer waste and any overburden that had been stripped. In some cases, dikes were built across valleys that had already been mined for barite. The total production of barite from the Southeast Missouri Barite District and the Valles Mines is estimated to have been about 13.1 million tons. Most of the barite production was from Washington County. Hand mining and processing of barite was inefficient. Estimates of barite recovery range from less than one-fourth to about one-half because pillars between the shafts in the residuum needed to be left unmined for stability. With mechanized mining, large amounts of barite were lost during the milling process. It has been estimated that about 30 percent of the barite was lost and that about two-thirds of the lost barite was fine-grained and was discharged to the tailings ponds. Some galena was lost to the tailings ponds. A 1972 inventory of tailings ponds by the Missouri Geological Survey identified 67 ponds in the Southeast Missouri Barite District (there are more than this currently documented). Results from samples from four ponds that were drilled were used to estimate that the 67 ponds contained almost 39 million tons (or cubic yards) of tailings averaging about 5 percent barite, for a potential reserve of 1.935 million tons of barite. It is not known how much lead was removed during barite mining, either by hand or mechanized mining and processing, how much lead was recovered, or how much lead went as fines to the tailing ponds or as coarse material to mine roads or was otherwise lost.

Missouri↗
USGS1973

Summary of seismic activity and its relation to geology and mining in the Sunnyside mining district, Carbon and Emery Counties, Utah, during 1967-1970

In the Sunnyside mining district, Utah, coal is mined under thick and variable overburden which is locally weakened by faults and other structural discontinuities. Stress changes and local stress concentrations produced by mining under these conditions often cause sudden and violent ruptures in the coal and surrounding rock mass. The strain energy released by this type of failure, which can produce shock waves and may discharge coal and rock with explosive force, is often a serious threat to life and property. These releases of strain energy are called bumps or bounces by miners if they occur in the coal, and rock bursts if they occur in the surrounding rock mass. Many of these releases are so violent that they generate seismic waves that can be felt, or at least detected by seismic instruments, miles from the site of the rupture, whereas others are smaller and can be detected only by those sensitive seismic instruments within a few thousand feet of the site of the rupture. In 1969 and 1970, about 27,000 and about 15,000 earth tremors, respectively, were recorded by the five-station seismic monitoring network that is located at the surface and encompasses most of the mine workings in the district. Of these totals, 512 and 524 earth tremors, respectively, were of sufficient magnitude (greater than 1. 5 on the Richter scale) so that the hypocenters could be accurately located. In 1968 about 20,000 tremors were recorded, with 281 large enough to plot, but in 1967 over 50,000 were recorded, of which 540 were plotted. In this report we discuss the way in which seismic activity, geology, and mining are related or seem to be related for the period 1967 through 1970, with emphasis on the period 1969-70. We also suggest certain mining procedures which, based on studies during the period, might increase the safety and efficiency of mining operations in the Sunnyside district. A complete tabulation of the larger magnitude earth tremors which occurred during 1969-70 and descriptions of how they relate to mining are given in the appendix. Similar tabulations and descriptions for 1967 and 1968 are available in earlier reports (Barnes and others, 1969; Dunrud and others, 1970).

Open-File Report↗
USGS1886

Geology and mining industry of Leadville, Colorado, with atlas

The present work was undertaken at the instance of the Ron. Clarence King, first Director of the United States Geological Survey, in 1879. It was his intention that it should form part of a series of monographs which would in time include all the important mining districts of the country, and thus furnish an accurate and permanent record of the manner of occurrence and geological relation of the metallic deposits of the United States, as well a of all substantial improvement in the methods of obtaining the metals from their ores.

Colorado↗
USGS2016

New perspectives on a 140-year legacy of mining and abandoned mine cleanup in the San Juan Mountains, Colorado

The Gold King mine water release that occurred on 5 August 2015 near the historical mining community of Silverton, Colorado, highlights the environmental legacy that abandoned mines have on the environment. During reclamation efforts, a breach of collapsed workings at the Gold King mine sent 3 million gallons of acidic and metal-rich mine water into the upper Animas River, a tributary to the Colorado River basin. The Gold King mine is located in the scenic, western San Juan Mountains, a region renowned for its volcano-tectonic and gold-silver-base metal mineralization history. Prior to mining, acidic drainage from hydrothermally altered areas was a major source of metals and acidity to streams, and it continues to be so. In addition to abandoned hard rock metal mines, uranium mine waste poses a long-term storage and immobilization challenge in this area. Uranium resources are mined in the Colorado Plateau, which borders the San Juan Mountains on the west. Uranium processing and repository sites along the Animas River near Durango, Colorado, are a prime example of how the legacy of mining must be managed for the health and well-being of future generations. The San Juan Mountains are part of a geoenvironmental nexus where geology, mining, agriculture, recreation, and community issues converge. This trip will explore the geology, mining, and mine cleanup history in which a community-driven, watershed-based stakeholder process is an integral part. Research tools and historical data useful for understanding complex watersheds impacted by natural sources of metals and acidity overprinted by mining will also be discussed.

Colorado↗
USGS2000

Hydrologic and geologic characteristics of the Yucca Mountain site relevant to the performance of a potential repository

Yucca Mountain, located ~100 mi northwest of Las Vegas, Nevada, has been designated by Congress as a site to be characterized for a potential mined geologic repository for high-level radioactive waste. This field trip will examine the regional geologic and hydrologic setting for Yucca Mountain, as well as specific results of the site characterization program. The first day focuses on the regional setting with emphasis on current and paleo hydrology, which are both of critical concern for predicting future performance of a potential repository. Morning stops will be southern Nevada and afternoon stops will be in Death Valley. The second day will be spent at Yucca Mountain. The field trip will visit the underground testing sites in the "Exploratory Studies Facility" and the "Busted Butte Unsaturated Zone Transport Field Test" plus several surface-based testing sites. Much of the work at the site has concentrated on studies of the unsaturated zone, an element of the hydrologic system that historically has received little attention. Discussions during the second day will compromise selected topics of Yucca Mountain geology, hydrology and geochemistry and will include the probabilistic volcanic hazard analysis and the seismicity and seismic hazard in the Yucca Mountain area. Evening discussions will address modeling of regional groundwater flow, the results of recent hydrologic studies by the Nye County Nuclear Waste Program Office, and the relationship of the geology and hydrology of Yucca Mountain to the performance of a potential repository. Day 3 will examine the geologic framework and hydrology of the Pahute Mesa-Oasis Valley Groundwater Basin and then will continue to Reno via Hawthorne, Nevada and the Walker Lake area.

Nevada↗
USGS2015

Evaluation of selected static methods used to estimate element mobility, acid-generating and acid-neutralizing potentials associated with geologically diverse mining wastes

A comparison study of selected static leaching and acid–base accounting (ABA) methods using a mineralogically diverse set of 12 modern-style, metal mine waste samples was undertaken to understand the relative performance of the various tests. To complement this study, in-depth mineralogical studies were conducted in order to elucidate the relationships between sample mineralogy, weathering features, and leachate and ABA characteristics. In part one of the study, splits of the samples were leached using six commonly used leaching tests including paste pH, the U.S. Geological Survey (USGS) Field Leach Test (FLT) (both 5-min and 18-h agitation), the U.S. Environmental Protection Agency (USEPA) Method 1312 SPLP (both leachate pH 4.2 and leachate pH 5.0), and the USEPA Method 1311 TCLP (leachate pH 4.9). Leachate geochemical trends were compared in order to assess differences, if any, produced by the various leaching procedures. Results showed that the FLT (5-min agitation) was just as effective as the 18-h leaching tests in revealing the leachate geochemical characteristics of the samples. Leaching results also showed that the TCLP leaching test produces inconsistent results when compared to results produced from the other leaching tests. In part two of the study, the ABA was determined on splits of the samples using both well-established traditional static testing methods and a relatively quick, simplified net acid–base accounting (NABA) procedure. Results showed that the traditional methods, while time consuming, provide the most in-depth data on both the acid generating, and acid neutralizing tendencies of the samples. However, the simplified NABA method provided a relatively fast, effective estimation of the net acid–base account of the samples. Overall, this study showed that while most of the well-established methods are useful and effective, the use of a simplified leaching test and the NABA acid–base accounting method provide investigators fast, quantitative tools that can be used to provide rapid, reliable information about the leachability of metals and other constituents of concern, and the acid-generating potential of metal mining waste.

Applied Geochemistry↗