Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal of Geophysical Research--Solid Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources
USGS2024

Physics-based forecasts of eruptive vent locations at calderas

Constraining stresses in the Earth's crust in volcanic regions is critical for understanding many mechanical processes related to eruptive activity. Dike pathways, in particular, are shaped by the orientation of principal stress axes. Therefore, accurate models of dike trajectories and future vent locations rely on accurate estimates of stresses in the subsurface. This work presents a framework for probabilistic constraint of the stress state of calderas by combining three-dimensional physics-based dike pathway models with observed past vent locations using a Monte Carlo approach. The retrieved stress state is then used to produce probability maps of future vent opening across a caldera. We test our stress inversion and vent forecast approach on synthetic scenarios, and find it successful depending on the distribution of the available vents and the complexity of the volcano's structural history. We explore the potential and limitations of the approach, show how its performance is sensitive to the assumptions in the models and available prior information, and discuss how it may be applied to real calderas.

Journal of Geophysical Research: Solid Earth↗
USGS2024

Controls on the stratigraphic architecture of the US Atlantic margin: Processes forming the accommodation space

Accommodation space governs the spatial and temporal distributions of sediments in continental margins. Mapping the sedimentation patterns, therefore, offers insights into the solid-Earth processes that shape accommodation space. We assembled an unprecedented amount of seismic and borehole data along the Eastern North American Margin and used it to divide the margin's sedimentary package into eight chronostratigraphic intervals, identifying temporal shifts in depocenters under the continental shelf, slope, and rise. The Jurassic depocenters follow the syn-rift structure and its thermal subsidence loci. The Long Island Platform is the only margin segment where the early post-rift sediment thickness matches subsidence predictions from uniform-stretching models, whereas in Georges Bank Basin (GBB) and Baltimore Canyon Trough (BCT), sediment thickness is 1.5–3 times higher than predicted, pointing to other factors at play. A margin-wide Jurassic transient shoulder uplift is inferred from the occurrence of stratigraphic onlaps above thinned crust. Unlike the Jurassic, the Cretaceous and Cenozoic depocenters disregard the inherited subsidence pattern. The accommodation space over the shelf and coastal plain during the Cretaceous was affected by regional isostatic compensation of the sedimentary loads accumulated on the shelf and rise. Accommodation space development in the GBB was interrupted during the Cretaceous after the margin crossed the Great Meteor Hotspot track, resulting in a widespread permanent uplift, erosion, and sediment redistribution. The distribution of anomalous Neogene subsidence in the BCT challenges previous suggestions of mantle dynamic control on the accommodation space and favors flexural downwarping of the shelf by sediment accumulation on the rise.

Journal of Geophysical Research: Solid Earth↗
USGS2026

Constraining the permeability and outer-rise hydration at the Central America margin

Subduction zones are important drivers of Earth's geochemical evolution; the presence of water within the subduction system has substantial implications for geohazards, including the style of seismicity and the volume of magma generated at arc volcanoes. We utilize estimates of pore fluid distributions in the outer-rise region of the Central American margin imaged using controlled-source electro-magnetic surveys and novel two-dimensional forward models simulating poro-elastic deformation of slab bending to constrain the background permeability structure of the Cocos Plate and within outer-rise fault damage zones. The model results suggest that a relatively low background permeability structure is required to match the observed porosity at depths greater than 3 km (less than ~10 −21 m 2 . Similarly, increasing the permeability within the damage zones of outer-rise faults by more than a factor of 10 also over-predicts observed porosity distributions at depths greater than 3 km. However, the simulations consistently underpredict pore fluid distributions between depths of 1–3 km, which may reflect nonlinear elastic or anelastic deformation processes not included in the simulations or inherent uncertainty in the conversion of resistivity measurements to porosity distributions. The best-fitting depth-permeability relationship is relatively low, which has important implications for the timing of pore fluid release down-dip of the trench, as it restricts shallow fluid release, likely leading to higher pore fluid pressures, more widespread hydraulic fracturing, and deeper release of pore fluid along the plate interface.

Journal of Geophysical Research, Solid Earth↗
USGS2024

GRACE and GRACE Follow-On gravity observations of intermediate-depth earthquakes contrasted with those of shallow events

Earthquakes involve mass redistribution within the solid Earth and the ocean, and as a result, perturb the Earth's gravitational field. For most of the shallow (<60 km) earthquakes with M w > 8.0, the GRACE satellite gravity measurements suggest considerable volumetric disturbance of rocks. At a spatial scale of hundreds of km, the effect of volumetric change exceeds gravity change by vertical deformation; for example, negative gravity anomalies associated with volumetric expansion are characteristic patterns after shallow thrust events. In this study, however, we report contrasting observations of gravity change from two intermediate-depth (100–150 km) earthquakes of 2016 & 2017 Mw 8.0 (two combined) Papua New Guinea thrust faulting events and 2019 Mw 8.0 Peru normal faulting and highlight the importance of compressibility in earthquake deformation. The combined 2016/17 thrust events resulted in a positive gravity anomaly of 5–6 microGal around the epicenter, while the 2019 normal faulting produced a negative gravity anomaly of 3–4 microGal. Our modeling found that these gravity changes are manifestation of vertical deformation with limited volumetric change, distinct from gravity changes after the shallow earthquakes. The stronger resistance of rocks to volume change at intermediate-depth results in largely incompressible deformation and thus in a gravity change dominated by vertical deformation. In addition, malleable rocks under high pressure and temperature at depth facilitated substantial afterslip and/or fast viscoelastic relaxation causing additional vertical deformation and gravity change equivalent to the coseismic change. For the Papua New Guinea events, this means that postseismic relaxation enhanced coseismic uplift and relative sea level decrease.

Journal of Geophysical Research: Solid Earth↗
USGS2022

Off-fault deformation in regions of complex fault geometries: the 2013, Mw7.7, Baluchistan rupture (Pakistan)

Observations of recent earthquake surface ruptures show that ground deformations include a localized component occurring on faults, and an off-fault component affecting the surrounding medium. This second component is also referred to as off-fault deformation (OFD). The localized component generally occurs on complex networks of faults that connect at depth onto a unique fault plane, whereas OFD consists of distributed fracturing and diffuse deformation of the bulk volume, and occurs over scales of hundreds of meters to kilometers around the faults. High-resolution optical image correlation presents a unique potential to characterize the complexity of the surface displacements, including on-fault displacements and OFDs. In this study, we used sub-pixel correlation of 0.5-m resolution optical images to measure the surface displacement field with a <20 cm accuracy for a 30-km long section of the 2013 M w 7.7 Baluchistan, Pakistan, rupture. Our results document significant variability in the fault displacements, associated with large proportions of OFD in regions of fault geometrical complexity. Conversely, in regions where the fault geometry is simple, surface deformation is entirely accommodated by the primary faults with 0% OFD. When combining the localized deformation on faults with the OFD, we show that the total surface displacement budget is constant along the strike of the rupture, despite strong variations observed in the rupture geometry. Based on this analysis, we propose an idealized scenario of earthquake surface deformation as a function of the rupture geometrical variations.

Journal of Geophysical Research, Solid Earth↗
USGS2023

Spatial and temporal analysis of geologic slip rates, Cucamonga Fault, California, USA: Implications for along-strike applications and multi-fault rupture

To constrain fault processes and hazard, fault slip rates may be extrapolated over different fault lengths or time intervals. Here, we investigate slip rates for the Cucamonga Fault (CF). The CF is located at the junction of the Transverse Range fault system with the San Andreas and San Jacinto Faults, and it is hypothesized to connect with these faults, promoting the propagation of large, multi-fault earthquakes. Previous work has shown that CF displacements on late Quaternary alluvial fan surfaces are highly variable along strike. We present two new 10 Be surface exposure ages from depth profiles on the alluvial fans. Slip rates are consistent with a rate of 1.4 ± 0.3 m/kyr over time intervals of ∼20, ∼30, and ∼40 kyr. If the CF participates in multi-fault ruptures, then these earthquakes occur either rarely or with sufficient regularity to maintain apparently steady rates over multiple intervals. We also explore along-strike fault displacement variability using a calibrated morphological model. The model successfully reproduces scarp profiles and indicates that fault displacement variability can be explained in part by scarp age but not uplift rate. We infer that both erosion by ephemeral gullying and distributed deformation contribute to fault displacement variability, although both are difficult to detect confidently without excavations across the scarp. These investigations show that better characterization of cumulative-slip variability along strike may improve accuracy and precision of slip rates. Slip rates that do not consider epistemic uncertainties may not be suitable for extrapolation over longer fault sections.

California↗
USGS2022

Toward next-generation lava flow forecasting: Development of a fast, physics-based lava propagation model

During effusive volcanic crises, the eruption and propagation of lava flows pose a significant hazard to nearby populations, homes, and infrastructure. Consequently, timely lava flow forecasts are a critical need for volcano observatory and emergency management operations. Previous lava flow modeling tools are typically either too slow to produce timely forecasts, or are fast, but lack critical aspects of lava physics or important forecasting outputs. In particular, the strong thermal stratification present in laminar, high-Prandtl number flows has generally been neglected. Bulk rheological changes have previously been computed from cell-averaged temperatures, assuming that the flow is thermally mixed. Here, we detail the development and initial testing of Lava2d, a new two-dimensional depth-averaged finite volume model of lava flow propagation over natural terrain which accounts for bulk rheological changes due to thermorheological stratification. We use a novel approach to energy conservation based on tracking cooling and solidifying at the flow base and at the moving flow surface, allowing for the estimation of more realistic vertical thermorheological profiles, while maintaining computational efficiency, producing very timely model runs. We validate our approach with three examples: comparison with theoretical propagation of crust-dominated lava flows, comparison with a large-scale molten basalt experiment from the Syracuse University Lava Project, and efficiency testing and comparison with the initial phase of the 1984 Mauna Loa lava flows. Our model is shown to produce rapid, realistic forecasts, making it a good candidate for operationalization in active volcanic regions such as in Hawai'i.

Journal of Geophysical Research - Solid Earth↗
USGS2022

On the use of high-resolution and deep-learning seismic catalogs for short-term earthquake forecasts: Potential benefits and current limitations

Enhanced earthquake catalogs provide detailed images of evolving seismic sequences. Currently, these data sets take some time to be released but will soon become available in real time. Here, we explore whether and how enhanced seismic catalogs feeding into established short-term earthquake forecasting protocols may result in higher predictive skill. We consider three enhanced catalogs for the 2016–2017 Central Italy sequence, featuring a bulk completeness lower by at least two magnitude units compared to the real-time catalog and an improved hypocentral resolution. We use them to inform a set of physical Coulomb Rate-and-State (CRS) and statistical Epidemic-Type Aftershock Sequence (ETAS) models to forecast the space-time occurrence of M3+ events during the first 6 months of the sequence. We track model performance using standard likelihood-based metrics and compare their skill against the best-performing CRS and ETAS models among those developed with the real-time catalog. We find that while the incorporation of the triggering contributions from new small magnitude detections of the enhanced catalogs is beneficial for both types of forecasts, these models do not significantly outperform their respective near real-time benchmarks. To explore the reasons behind this result, we perform targeted sensitivity tests that show how (a) the typical spatial discretizations of forecast experiments ( 2 km) hamper the ability of models to capture highly localized secondary triggering patterns and (b) differences in earthquake parameters (i.e., magnitude and hypocenters) reported in different catalogs can affect forecast evaluation. These findings will contribute toward improving forecast model design and evaluation strategies for next-generation seismic catalogs.

Journal of Geophysical Research--Solid Earth↗
USGS2023

Using corrected and imputed polarity measurements to improve focal mechanisms in a regional earthquake catalog near the Mt. Lewis Fault Zone, California

We utilized relative polarity measurements and machine learning techniques to better resolve focal mechanisms and stress orientations considering a catalog of ∼29,000 relocated earthquakes that occurred during 1984–2021 in the southeastern San Francisco Bay Area. Earthquake focal mechanisms are commonly produced using P wave first motion polarities, which traditionally requires events to be well-recorded across a seismic network with good focal sphere coverage. We adapted recently developed approaches that are less dependent on high signal-to-noise records and exploit similar waveforms to produce relative polarity and amplitude measurements between earthquake pairs. These techniques were previously only applied on localized earthquake sequences, and we further developed these approaches so that they can be utilized for regional catalogs. We validated or corrected manually identified polarities by performing polarity consensuses using earthquake pairs. Missing and unreliable polarity measurements were imputed using iterative random forests, an unsupervised ensemble machine learning method. Relative P and S wave amplitude measurements were made between earthquakes, constraining S / P ratios for low signal-to-noise waveforms. Using these techniques, we were able to reduce focal mechanism uncertainties by an average of ∼13° and produced well-constrained focal mechanisms for ∼6 times as many earthquakes than those produced using only the traditionally derived polarities. We performed stress inversions using the focal mechanisms by grouping the focal mechanism results into a quadtree structure. Our stress results are consistent with previous work, albeit at a higher spatial resolution, and demonstrate these techniques can aid our understanding of fault structures and kinematics in more detail than was previously possible.

California↗
USGS2023

Strength recovery in quartzite is controlled by changes in friction in experiments at hydrothermal conditions up to 200°C

The rate of fault zone restrengthening between earthquakes can be influenced by both frictional and cohesive healing processes. Friction is dependent on effective normal stress while cohesion is independent of normal stress, potentially explaining—in part—the lack of depth dependence of earthquake stress drops. Although amenable to laboratory testing, few studies have systematically addressed the normal stress dependence of restrengthening rate. This is partially due to difficulty in separating relative contributions of friction and cohesion in recovery of fault strength. We present results from a series of slide-hold-slide tests on thin layers (≤10 𝜇m) of ultrafine quartz gouge that develop during shearing of initially bare-surface quartzite. Tests were conducted at 10 MPa constant pore pressure, 20–200 MPa constant effective normal stress, and temperatures of 22°–200°C. Restrengthening, defined as the difference between peak shear stress measured after resumption of sliding and steady-state sliding shear stress, increases with the log of hold duration. The 200°C healing rate, 0.014 per e-fold increase in time, is comparable to that determined from seismological observations along the Calaveras Fault, California. Construction of Mohr-Coulomb failure envelopes shows that changes in cohesion are small (<1 MPa) and independent of hold durations to 10 5 s, indicating that the increased strength is due to changes in the friction coefficient. These experimental results are inconsistent with the hypothesis that cohesive healing explains the depth independence of earthquake stress drop, but higher temperatures, longer time-scales, and more complex mineralogy could facilitate cohesive healing in natural fault systems.

Journal of Geophysical Research - Solid Earth↗
USGS2023

Accuracy of finite fault slip estimates in subduction zone regions with topographic Green's functions and seafloor geodesy

Until recently, the lack of seafloor geodetic instrumentation and the use of unrealistically simple, half-space based forward models have resulted in poor resolution of near-trench slip in subduction zone settings. Here, we use a synthetic framework to investigate the impact of topography and geodetic data distribution on coseismic slip estimates in various subduction zone settings. We calculate surface displacements in two synthetic topographic domains that have topography similar to that of Chile and Japan, respectively. We then attempt to image target slip distributions by using a Bayesian approach to solve for slip with two sets of Green's functions—one that accounts for topography and one that does not—and five sets of 50 or more observation points selected from the synthetic surface displacements. Three of these sets of observation points are entirely onland, and two include 5–10 seafloor geodetic sites. We find that the use of topographic Green's functions always improves inferred slip models, and with seafloor geodetic data, it enables an almost perfect recovery of a target slip model, even in the near-trench region. Critically, our results demonstrate that it would be impossible for non-topographic Green's functions to properly recover the true slip distribution, particularly in the near-trench region. We also perform a parameter study with approximately 4,000 slip models estimated using a least-square approach, and find that topographic Green's functions yield significantly more accurate slip models in cases where good data (well distributed and reasonably dense) are available, even in the absence of seafloor geodetic sites.

Journal of Geophysical Research: Solid Earth↗
USGS2023

Pre-eruptive outgassing and pressurization, and post-fragmentation bubble nucleation, recorded by vesicles in breadcrust bombs from vulcanian activity at Guagua Pichincha Volcano, Ecuador

Breadcrust bombs formed during Vulcanian eruptions are assumed to originate from the shallow plug or dome. Their rim to core texture reflects the competition between cooling and degassing timescales, which results in a dense crust with isolated vesicles contrasting with a highly vesicular vesicle network in the interior. Due to relatively fast quenching, the crust can shed light on pre- and syn-eruptive conditions prior to or during fragmentation, whereas the interior allows us to explore post-fragmentation vesiculation. Investigation of pre- to post-fragmentation processes in breadcrust bombs from the 1999 Vulcanian activity at Guagua Pichincha, Ecuador, via 2D and 3D textural analysis reveals a complex vesiculation history, with multiple, spatially localized nucleation and growth events. Large vesicles (Type 1), present in low number density in the crust, are interpreted as pre-eruptive bubbles formed by outgassing and collapse of a permeable bubble network during ascent or stalling in the plug. Haloes of small, syn-fragmentation vesicles (Type 2), distributed about large vesicles, are formed by pressurization and enrichment of volatiles in these haloes. The nature of the pressurization process in the plug is discussed in light of seismicity and ground deformation signals, and previous textural and chemical studies. A third population (Type 3) of post-fragmentation small vesicles appears in the interior of the bomb, and growth and coalescence of Type 2 and 3 vesicles causes the transition from isolated to interconnected bubble network in the interior. We model the evolution of viscosity, bubble growth rate, diffusion timescales, bubble radius and porosity during fragmentation and cooling. These models reveal that thermal quenching dominates in the crust whereas the interior undergoes a viscosity quench caused by degassing, and that the transition from crust to interior corresponds to the onset of percolation and development of permeability in the bubble network.

Guagua Pichincha Volcano↗
USGS2023

Quantifying site effects and their influence on earthquake source parameter estimations using a dense array in Oklahoma

We investigate the effects of site response on source parameter estimates using earthquakes recorded by the LArge-n Seismic Survey in Oklahoma (LASSO). While it is well known that near-surface unconsolidated sediments can cause an apparent breakdown of earthquake self-similarity, the influence of laterally varying site conditions remains unclear. We analyze site conditions across the 1825-station array on a river plain within an area of 40 km by 23 km using vertical ground motions from 14 regional earthquakes. While the source radiation pattern controls P-wave ground motions below 8 Hz, the surface geology correlates with P-wave ground motions above 8 Hz and S-wave ground motions at 2–21 Hz. Stations installed in alluvial sediments have vertical ground motions that can exceed three times the array median. We use the variation of ground motion of regional earthquakes across the array as a proxy for site effects. The corner frequencies and stress drops of local earthquakes ( M L = 0.01–3) estimated using a standard single-spectra approach show negative correlations with the site-effect proxy, while the seismic moments show positive correlations. In contrast, the spectral-ratio approach effectively shows no correlation. The overall bias is small as expected for this relatively homogeneous structure; accurate estimation of site-related biases requires at least 30 stations. Correcting for site-related biases reduces the standard deviations of the source parameters by less than 13% of the total variations. Remaining variations are partially associated with source directivity and model misfits— as small earthquakes can have complex ruptures.

Oklahoma↗
USGS2024

Exploring the dynamic interactions between the Southern San Andreas Fault and a normal fault under the Salton Sea

We investigate the dynamic interactions between the Southern San Andreas Fault (SSAF) and a proximal normal fault (NF) beneath the Salton Sea in southern California. The NF, positioned near the SSAF terminus at Bombay Beach, exhibits 11–15 displacement events across 14 stratigraphic sequences, with a range of 0.2–1.4 m of vertical offset since ∼2–3 ka. Notably, four of these events may align temporally with SSAF earthquakes, raising questions about the possible interplay between the two faults. Utilizing dynamic rupture models, we analyze the coseismic interactions between the SSAF and NF, addressing under what conditions the SSAF induces slip on the NF. Our findings reveal that a suite of SSAF ruptures, particularly those propagating from north to south, can trigger slip on the normal fault and replicate observed vertical offsets. If the SSAF extends beneath the Salton Sea, earthquakes originating south of the NF intersection are less likely to trigger normal fault slip, although we cannot exclude this possibility. Some SSAF ruptures do not trigger discernible slip on the NF, rendering such events undetectable in the stratigraphic record. Our research contributes toward discussions regarding the seismic hazard in southern California, shedding light on the interplay between the SSAF and NF.

California↗
USGS2024

Limited preservation of strike-slip surface displacement in the geomorphic record

Offset geomorphic markers are commonly used to interpret slip history of strike-slip faults and have played an important role in forming earthquake recurrence models. These data sets are typically analyzed using cumulative probability methods to interpret average amounts of slip in past earthquakes. However, interpretation of the geomorphic record to infer surface slip history is complicated by slip variability, measurement uncertainty, and modification of offset features in the landscape. To investigate how well geomorphic data record surface slip, we use offset measurements from recent strike-slip surface ruptures ( n = 39), faults with geomorphic evidence of multiple strike-slip earthquakes ( n = 29), and synthetic slip distributions with added noise ( n > 10,000) to examine the constraints of the geomorphic record and the underlying assumptions of the cumulative offset probability distribution analysis method. We find that the geomorphic record is unlikely to resolve more than two paleo-slip distributions, except in specific cases with low slip variability, high slip-per-event, and semiarid climate. In cases where site-specific conditions allow for interpretation of more than two earthquakes, lateral extrapolation along a fault is not straightforward because on-fault displacement and distributed deformation may be spatially variable in each earthquake. We also find that average slip in modern earthquakes is adequately recovered by probability methods, but the reported prevalence of strike-slip faults with characteristic slip history is not supported by geomorphic data. We also propose updated methods to interpret slip history and construct uncertainty bounds for paleo-slip distributions.

Journal of Geophysical Research: Solid Earth↗
USGS2024

Earthquake cycle mechanics during caldera collapse: Simulating the 2018 Kīlauea eruption

In multiple observed caldera-forming eruptions, the rock overlying a draining magma reservoir dropped downward along ring faults in sequences of discrete collapse earthquakes. These sequences are analogous to tectonic earthquake cycles and provide opportunities to examine fault mechanics and collapse eruption dynamics over multiple events. Collapse earthquake cycles have been studied with zero-dimensional slider-block models, but these do not account for the complicated interplay between fluid and elastic dynamics or for factors such as the heterogeneous fault properties and non-vertical ring fault geometries often inferred at volcanoes. We present two-dimensional axisymmetric mafic piston-like collapse earthquake cycle models that include rate-and-state friction, fully-dynamic elasticity, and compressible viscous fluid magma flow. We demonstrate that collapse earthquake intervals and magnitudes are highly sensitive to inertial effects, evolving stress fields, fault geometry, and depth-varying fault friction. Given the consistent earthquake cycles observed in most eruptions, this suggests that ring faults can quickly stabilize and often become nearly vertical at depth. We use the well-monitored 2018 collapse sequence at Kı̄lauea as a case study. Our model can produce many features of Kı̄lauea seismic and geodetic observations, except for a significant amount of interseismic slip, which cannot be readily explained with simple rate-and-state friction parameterizations.

Hawaii↗
USGS2024

Subduction zone geometry modulates the megathrust earthquake cycle: Magnitude, recurrence, and variability

Megathrust geometric properties exhibit some of the strongest correlations with maximum earthquake magnitude in global surveys of large subduction zone earthquakes, but the mechanisms through which fault geometry influences subduction earthquake cycle dynamics remain unresolved. Here, we develop 39 models of sequences of earthquakes and aseismic slip (SEAS) on variably-dipping planar and variably-curved nonplanar megathrusts using the volumetric, high-order accurate code tandem to account for fault curvature. We vary the dip, downdip curvature and width of the seismogenic zone to examine how slab geometry mechanically influences megathrust seismic cycles, including the size, variability, and interevent timing of earthquakes. Dip and curvature control characteristic slip styles primarily through their influence on seismogenic zone width: wider seismogenic zones allow shallowly-dipping megathrusts to host larger earthquakes than steeply-dipping ones. Under elevated pore pressure and less strongly velocity-weakening friction, all modeled fault geometries host uniform periodic ruptures. In contrast, shallowly-dipping and sharply-curved megathrusts host multi-period supercycles of slow-to-fast, small-to-large slip events under higher effective stresses and more strongly velocity-weakening friction. We discuss how subduction zones' maximum earthquake magnitudes may be primarily controlled by the dip and dimensions of the seismogenic zone, while second-order effects from structurally-derived mechanical heterogeneity modulate the recurrence frequency and timing of these events. Our results suggest that enhanced co- and interseismic strength and stress variability along the megathrust, such as induced near areas of high or heterogeneous fault curvature, limits how frequently large ruptures occur and may explain curved faults' tendency to host more frequent, smaller earthquakes than flat faults.

Journal of Geophysical Research: Solid Earth↗
USGS2024

Brittle regime slip partitioned damage and deformation mechanisms along the eastern Denali fault zone in southwestern, Yukon

Rare bedrock exposures of the eastern Denali fault zone in southwestern Yukon allow for the measurement, sampling, and analyses of brittle regime fault slip data and deformation mechanisms to explore relations to far field, oblique plate motions. Host rock lithologies and associated slip surfaces show episodic damage zone‐related deformation and calcite ± hematite ± chlorite related hydrothermal fluid flow. This regional scale network of asymmetric fault damage is spatially and kinematically linked to a discrete and narrow fault core. Fault network observations, orientations, slip data, and strain inversions document a slip partitioned strike‐slip fault system with locally and mutually overprinting strike‐, oblique‐, and dip‐slip components. Microstructural analyses reveal crystal plastic and co‐seismic brittle deformation mechanisms active in a narrow range of upper crustal temperature, pressure, fluid, and chemical conditions. The net damage related slip is not exclusively formed by a single kinematic system, but rather a fully partitioned, time integrated system likely operative for much of the fault's brittle regime evolution temporally constrained by previously published thermochronometric data. Although the fault slip data was collected from outcrop‐scale exposures at sites tens of kilometers apart, results show remarkable correlation between fault kinematics and plate motions along the ∼580 km long eastern Denali fault segment. End member, subhorizontal, northeast directed reverse and north directed dextral strike slip fault strain axes closely reflect relative plate motion interactions over at least the last 30 m.y. and act as a proxy for far‐field stresses compatible with the kinematics of the damage zone network.

Alaska↗