Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal of Geophysical Research Planets”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources
USGS2011

Sources and physical processes responsible for OH/H2O in the lunarsoil as revealed by the Moon Mineralogy Mapper (M3)

Analysis of two absorption features near 3 μ m in the lunar reflectance spectrum, observed by the orbiting M 3 spectrometer and interpreted as being due to OH and H 2 O, is presented, and the results are used to discuss the processes producing these molecules. This analysis focuses on the dependence of the absorptions on lunar physical properties, including composition, illumination, latitude, and temperature. Solar wind proton-induced hydroxylation is proposed as the creation process, and its products could be a source for other reported types of hydrogen-rich material and water. The irregular and damaged fine-grained lunar soil seems especially adapted for trapping solar wind protons and forming OH owing to abundant dangling oxygen bonds. The M 3 data reveal that the strengths of the two absorptions are correlated and widespread, and both are correlated with lunar composition but in different ways. Feldspathic material seems richer in OH. These results seem to rule out water from the lunar interior and cometary infall as major sources. There appear to be correlations of apparent band strengths with time of day and lighting conditions. However, thermal emission from the Moon reduces the apparent strengths of the M 3 absorptions, and its removal is not yet completely successful. Further, many of the lunar physical properties are themselves intercorrelated, and so separating these dependencies on the absorptions is difficult, due to the incomplete M 3 data set. This process should also operate on other airless silicate surfaces, such as Mercury and Vesta, which will be visited by the Dawn spacecraft in mid-2011.

Journal of Geophysical Research E: Planets↗
USGS2008

First in situ investigation of a dark wind streak on Mars

Prominent low‐albedo wind streaks issue from embayments at the north end of Victoria crater in Meridiani Planum, the site of surface investigations by the Mars Exploration Rover Opportunity. Opportunity was sent to examine the darkest of these wind streaks and compare it to the adjacent soil in the brighter corridor between the streaks. Two nearby sites inside and outside of the streak were selected for visible and infrared remote sensing and for elemental abundance measurements and images of the microscopic soil morphology. The rover was next sent to study the interaction of the wind streak with an obstacle, a small rock near the source of the streak. Opportunity's observations suggest that the Victoria wind streaks are deposits of basaltic sand blown out of the crater from the dark dunes nestled below the crater rim, particularly at the base of the alcove leading up to the darkest streak. No local sources of sand have been identified within the Victoria crater wall rock, suggesting that the sand is supplied from outside the crater and is presently escaping its temporary topographic trap. This process presents a possible explanation for the serrated margin of Victoria crater through abrasion of the soft rock as trapped sands are blown out of the crater and carve alcoves under various seasonal winds. Some indication of the rate of activity of these wind streaks will be provided by continued monitoring of the erasure of the rover's tracks.

Journal of Geophysical Research E: Planets↗
USGS2021

A rock record of complex aeolian bedforms in a Hesperian desert landscape: The Stimson formation as exposed in the Murray Buttes, Gale Crater, Mars

Lithified aeolian strata encode information about ancient planetary surface processes and the climate during deposition. Decoding these strata provides insight regarding past sediment transport processes, bedform kinematics, depositional landscape, and the prevailing climate. Deciphering these signatures requires a detailed analysis of sedimentary architecture to reconstruct dune morphology, motion, and the conditions that enabled their formation. Here, we show that a distinct sandstone unit exposed in the foothills of Mount Sharp, Gale crater, Mars, records the preserved expression of compound aeolian bedforms that accumulated in a large dune field. Analysis of Mastcam images of the Stimson formation shows that it consists of cross‐stratified sandstone beds separated by a hierarchy of erosive bounding surfaces formed during dune migration. The presence of two orders of surfaces with distinct geometrical relations reveals that the Stimson‐era landscape consisted of large dunes (draas) with smaller, superimposed dunes migrating across their lee slopes. Analysis of cross‐lamination and subset bounding surface geometries indicate a complex wind regime that transported sediment toward the north, constructing oblique dunes. This dune field was a direct product of the regional climate and the surface processes active in Gale crater during the fraction of the Hesperian Period recorded by the Stimson formation. The environment was arid, supporting a large aeolian dune field; this setting contrasts with earlier humid depositional episodes, recorded by the lacustrine sediments of the Murray formation (also Hesperian). Such fine‐scale reconstruction of landscapes on the ancient surface of Mars is important to understanding the planet’s past climate and habitability.

Journal of Geophysical Research - Planets↗
USGS2024

Likely ferromagnetic minerals identified by the Perseverance rover and implications for future paleomagnetic analyses of returned Martian samples

Although Mars today does not have a core dynamo, magnetizations in the Martian crust and in meteorites suggest a magnetic field was present prior to 3.7 billion years (Ga) ago. However, the lack of ancient, oriented Martian bedrock samples available on Earth has prevented accurate estimates of the dynamo's intensity, lifetime, and direction. Constraining the nature and lifetime of the dynamo are vital to understanding the evolution of the Martian interior and the potential habitability of the planet. The Perseverance rover, which is exploring Jezero crater, is providing an unprecedented opportunity to address this gap by acquiring absolutely oriented bedrock samples with estimated ages from ∼2.3 to >4.1 Ga. As a first step in establishing whether these samples could contain records of Martian paleomagnetism, it is important to determine their ferromagnetic mineralogy, the grain sizes of the phases, and the forms of any natural remanent magnetization. Here, we synthesize data from various Perseverance instruments to achieve those goals and discuss the implications for future laboratory paleomagnetic analyses. Using the rover's instrument payload, we find that cored samples likely contain iron oxides enriched in Cr and Ti. The relative proportions of Fe, Ti, and Cr indicate that the phases may be titanomagnetite or Fe-Ti-Cr spinels that are ferromagnetic at room temperature, but we cannot rule out the presence of non-ferromagnetic ulvöspinel, ilmenite, and chromite due to signal mixing. Importantly, the inferred abundance of iron oxides in the samples suggests that even <1 mm-sized samples will be easily measurable by present-day magnetometers.

Journal of Geophysical Research: Planets↗
USGS2021

Mars: Abundant recurring slope lineae (RSL) following the planet-encircling dust event (PEDE) of 2018

Recurring slope lineae (RSL) are dark linear markings on Mars that regrow annually and likely originate from the flow of either liquid water or granular material. Following the great dust storm (or planet-encircling dust event, PEDE) of Mars year (MY) 34, Mars Reconnaissance Orbiter/High Resolution Imaging Science Experiment has seen many more candidate RSL than in typical Mars years. They have been imaged at more than 285 unique locations from August 2018 (when the atmosphere was clearing as the PEDE decayed) to August 2019, about half (157) of which are locations where RSL have not been documented previously. In MY34, 150 active RSL sites were identified in the southern middle latitudes (SML, -60° to -30°), whereas an average of 36 active sites were observed in each previous year (MY28–33). Post-PEDE RSL are also present during southern summer over a wider range of latitude, slope aspect, and L s (areocentric longitude of the sun) than in prior years. These RSL sites usually show evidence for recent dust deposition: obscuration of relatively dark areas, an overall brighter and redder surface than in prior years, and dust devil tracks, which indicate dust lifting by several mechanisms. We speculate that dust-lifting processes may initiate and sustain RSL activity. The RSL may form from flows of dust (perhaps clumped) and/or sand that is destabilized by dust movement or directly mobilized by dust devils. If this is the case, then the otherwise puzzling recurrence and year-to-year variability of RSL activity can be at least partly explained. The dust replenishment varies from year to year, which could explain interannual variations in RSL activity.

Journal of Geophysical Research: Planets↗
USGS1999

Does Europa have a subsurface ocean? Evaluation of the geological evidence

It has been proposed that Jupiter's satellite Europa currently possesses a global subsurface ocean of liquid water. Galileo gravity data verify that the satellite is differentiated into an outer H 2 O layer about 100 km thick but cannot determine the current physical state of this layer (liquid or solid). Here we summarize the geological evidence regarding an extant subsurface ocean, concentrating on Galileo imaging data. We describe and assess nine pertinent lines of geological evidence: impact morphologies, lenticulae, cryovolcanic features, pull‐apart bands, chaos, ridges, surface frosts, topography, and global tectonics. An internal ocean would be a simple and comprehensive explanation for a broad range of observations; however, we cannot rule out the possibility that all of the surface morphologies could be due to processes in warm, soft ice with only localized or partial melting. Two different models of impact flux imply very different surface ages for Europa; the model favored here indicates an average age of ∼50 Myr. Searches for evidence of current geological activity on Europa, such as plumes or surface changes, have yielded negative results to date. The current existence of a global subsurface ocean, while attractive in explaining the observations, remains inconclusive. Future geophysical measurements are essential to determine conclusively whether or not there is a liquid water ocean within Europa today.

Journal of Geophysical Research: Planets↗
USGS2000

Identification of a basaltic component on the Martian surface from Thermal Emission Spectrometer data

The Mars Global Surveyor Thermal Emission Spectrometer (TES) instrument collected 4.8×10 6 spectra of Mars during the initial aerobraking and science‐phasing periods of the mission (September 14, 1997, through April 29, 1998). Two previously developed atmosphere‐removal models were applied to data from Cimmeria Terra (25°S, 213°W). The surface spectra derived for these two models agree well, indicating that the surface and atmosphere emission can be separated and that the exact atmosphere‐removal model used has little effect on the derived surface composition. The Cimmeria spectra do not match terrestrial high‐silica igneous rocks (granite and rhyolite), ultramafic igneous rocks, limestone, or quartz‐ and clay‐rich sandstone and siltstone. A particulate (sand‐sized) sample of terrestrial flood basalt does provide an excellent match in both spectral shape and band depth to the Cimmeria spectrum over the entire TES spectral range. No unusual particle size effects are required to account for the observed spectral shape and depth. The implied grain size is consistent with the thermal inertia and albedo of this region, which indicate a sand‐sized surface with little dust. The identification of basalt is consistent with previous indications of pyroxene and basalt‐like compositions from visible/near‐infrared and thermal‐infrared spectral measurements. A linear spectral deconvolution model was applied to both surface‐only Cimmeria spectra using a library of 60 minerals to determine the composition and abundance of the component minerals. Plagioclase feldspar (45%; 53%) and clinopyroxene (26%; 19%) were positively identified above an estimated detection threshold of 10–15% for these minerals. The TES observations provide the first identification of feldspars on Mars. The best fit to the Mars data includes only clinopyroxene compositions; no orthopyroxene compositions are required to match the Cimmeria spectra. Olivine (12%; 12%) and sheet silicate (15%; 11%) were identified with lower confidence. Carbonates, quartz, and sulfates were not identified in Cimmeria at detection limits of ∼5, 5, and 10%, respectively. Their presence elsewhere, however, remains open. The Cimmeria spectra are not well matched by any one SNC meteorite spectrum, indicating that this region is not characterized by a single SNC lithology. The occurrence of unweathered feldspar and pyroxene in Cimmeria, together with the inferred presence of pyroxene and unweathered basalts in other dark regions and at the Viking and Pathfinder landing sites, provides evidence that extensive global chemical weathering of materials currently exposed on the Martian surface has not occurred.

Journal of Geophysical Research: Planets↗
USGS2001

Nomad Rover field experiment, Atacama Desert, Chile 1. Science results overview

Nomad was deployed for a 45 day traverse in the Atacama Desert, Chile, during the summer of 1997. During this traverse, 1 week was devoted to science experiments. The goal of the science experiments was to test different planetary surface exploration strategies that included (1) a Mars mission simulation, (2) a science on the fly experiment, where the rover was kept moving 75% of the operation time. (The goal of this operation was to determine whether or not successful interpretation of the environment is related to the time spent on a target. The role of mobility in helping the interpretation was also assessed.) (3) a meteorite search using visual and instrumental methods to remotely identify meteorites in extreme environments, and (4) a time-delay experiment with and without using the panospheric camera. The results were as follow: the remote science team positively identified the main characteristics of the test site geological environment. The science on the fly experiment showed that the selection of appropriate targets might be even more critical than the time spent on a study area to reconstruct the history of a site. During the same operation the science team members identified and sampled a rock from a Jurassic outcrop that they proposed to be a fossil. The presence of paleolife indicators in this rock was confirmed later by laboratory analysis. Both visual and instrumental modes demonstrated the feasibility, in at least some conditions, of carrying out a field search for meteorites by using remote-controlled vehicles. Finally, metrics collected from the observation of the science team operations, and the use team members made of mission data, provided critical information on what operation sequences could be automated on board rovers in future planetary surface explorations.

Atacama Desert↗
USGS2003

Effects of spectrometer band pass, sampling, and signal‐to‐noise ratio on spectral identification using the Tetracorder algorithm

[1] Estimates of spectrometer band pass, sampling interval, and signal‐to‐noise ratio required for identification of pure minerals and plants were derived using reflectance spectra convolved to AVIRIS, HYDICE, MIVIS, VIMS, and other imaging spectrometers. For each spectral simulation, various levels of random noise were added to the reflectance spectra after convolution, and then each was analyzed with the Tetracorder spectral identification algorithm [ Clark et al. , 2003]. The outcome of each identification attempt was tabulated to provide an estimate of the signal‐to‐noise ratio at which a given percentage of the noisy spectra were identified correctly. Results show that spectral identification is most sensitive to the signal‐to‐noise ratio at narrow sampling interval values but is more sensitive to the sampling interval itself at broad sampling interval values because of spectral aliasing, a condition when absorption features of different materials can resemble one another. The band pass is less critical to spectral identification than the sampling interval or signal‐to‐noise ratio because broadening the band pass does not induce spectral aliasing. These conclusions are empirically corroborated by analysis of mineral maps of AVIRIS data collected at Cuprite, Nevada, between 1990 and 1995, a period during which the sensor signal‐to‐noise ratio increased up to sixfold. There are values of spectrometer sampling and band pass beyond which spectral identification of materials will require an abrupt increase in sensor signal‐to‐noise ratio due to the effects of spectral aliasing. Factors that control this threshold are the uniqueness of a material's diagnostic absorptions in terms of shape and wavelength isolation, and the spectral diversity of the materials found in nature and in the spectral library used for comparison. Array spectrometers provide the best data for identification when they critically sample spectra. The sampling interval should not be broadened to increase the signal‐to‐noise ratio in a photon‐noise‐limited system when high levels of accuracy are desired. It is possible, using this simulation method, to select optimum combinations of band‐pass, sampling interval, and signal‐to‐noise ratio values for a particular application that maximize identification accuracy and minimize the volume of imaging data.

Journal of Geophysical Research: Planets↗
USGS2010

Detection and mapping of hydrocarbon deposits on Titan

We report the identification of compounds on Titan's surface by spatially resolved imaging spectroscopy methods through Titan's atmosphere, and set upper limits to other organic compounds. We present evidence for surface deposits of solid benzene (C 6 H 6 ), solid and/or liquid ethane (C 2 H 6 ), or methane (CH 4 ), and clouds of hydrogen cyanide (HCN) aerosols using diagnostic spectral features in data from the Cassini Visual and Infrared Mapping Spectrometer (VIMS). Cyanoacetylene (2-propynenitrile, IUPAC nomenclature, HC 3 N) is indicated in spectra of some bright regions, but the spectral resolution of VIMS is insufficient to make a unique identification although it is a closer match to the feature previously attributed to CO 2 . We identify benzene, an aromatic hydrocarbon, in larger abundances than expected by some models. Acetylene (C 2 H 2 ), expected to be more abundant on Titan according to some models than benzene, is not detected. Solid acetonitrile (CH 3 CN) or other nitriles might be candidates for matching other spectral features in some Titan spectra. An as yet unidentified absorption at 5.01- μ m indicates that yet another compound exists on Titan's surface. We place upper limits for liquid methane and ethane in some locations on Titan and find local areas consistent with millimeter path lengths. Except for potential lakes in the southern and northern polar regions, most of Titan appears “dry.” Finally, we find there is little evidence for exposed water ice on the surface. Water ice, if present, must be covered with organic compounds to the depth probed by 1–5- μ m photons: a few millimeters to centimeters.

Journal of Geophysical Research - Planets↗
USGS2011

Regional-scale stratigraphy of surface units in Tyrrhena and Iapygia Terrae, Mars: Insights into highland crustal evolution and alteration history

The compositional, thermophysical and geologic characteristics of surface units in Iapygia and Tyrrhena Terra (60°E–100°E, 0°–30°S) provide new insights into the compositional stratigraphy of the region. Intercrater plains are dominated by two surface units. The older unit (unit 1) is deficient in olivine and more degraded and likely consists of a mixture of impact, volcanic and sedimentary materials. The younger unit (unit 2) is enriched in olivine, exhibits a resistant morphology and higher thermal inertia, and likely represents volcanic infilling of plains. Units 1 and 2 bear a strong resemblance to those previously mapped in Mare Serpentis, a section of highlands crust located northwest of Hellas Basin. Thus, the two major intercrater plains units are even more widespread than previously thought and therefore likely constitute important components of Mars' highland stratigraphy. Many craters in the region contain high thermal inertia deposits (unit 3) that are compositionally identical to unit 2. These may have formed via volcanic infilling or may represent sedimentary materials that have been eroded from crater walls and lithified. Less common units include olivine and/or pyroxene‐rich massifs and crater central peaks. These are primarily found within Hellas Basin rim units and may represent mantle materials brought toward the surface during the Hellas impact. Putative chloride deposits are primarily associated with olivine‐deficient surfaces (unit 1) that may be heavily degraded occurrences of unit 2. The observations raise a variety of questions related to Martian crustal evolution and alteration that may have more widespread implications outside the study region.

Journal of Geophysical Research - Planets↗
USGS2018

The thermophysical properties of the Bagnold Dunes, Mars: Ground truthing orbital data

We compare the thermophysical properties and particle sizes derived from the Mars Science Laboratory rover's Ground Temperature Sensor of the Bagnold dunes, specifically Namib dune, to those derived orbitally from Thermal Emission Imaging System, ultimately linking these measurements to ground truth particle sizes determined from Mars Hand Lens Imager images. In general, we find that all three datasets report consistent particle sizes for the Bagnold dunes (~110–350 μm and are within measurement and model uncertainties), indicating that particle sizes of homogeneous materials inferred from temperature measurements and thermophysical models are reliable. Furthermore, we examine the effects of two physical characteristics that could influence the modeled thermal inertia and particle sizes, including (1) fine‐scale (centimeter to meter scale) ripples and (2) thin layering of indurated/armored materials. To first order, we find that small‐scale ripples and thin (approximately centimeter scale) layers do not significantly affect the determination of bulk thermal inertia from orbital thermal data using a single nighttime temperature. Modeling of a layer of coarse or indurated material reveals that a thin layer (< ~5 mm; similar to what was observed by the Curiosity rover) would not significantly change the observed thermal properties of the surface and would be dominated by the properties of the underlying material. Thermal inertia and particle sizes of relatively homogeneous materials derived from nighttime orbital data should be considered as reliable, as long as there are no significant subpixel anisothermality effects (e.g., lateral mixing of multiple thermophysically distinct materials).

Journal of Geophysical Research: Planets↗
USGS2018

Degradation of 100‐m‐scale rocky ejecta craters at the InSight Landing Site on Mars and implications for surface processes and erosion rates in the hesperian and amazonian

Rocky ejecta craters (RECs) at the Interior Exploration using Seismic Investigations, Geodesy and Heat Transport (InSight) landing site on Elysium Planitia, Mars, provide constraints on crater modification and rates for the Hesperian and Amazonian. The RECs are between 10 m and 1.2 km in diameter and exhibit five classes of preservation. Class 1 represents pristine craters with sharp rims and abundant ejected rocks. From Classes 2 to 5, rims become more subdued, craters are infilled, and the ejecta become discontinuously distributed. High‐Resolution Imaging Science Experiment digital elevation models indicate a maximum depth to diameter ratio of ~0.15, which is lower than pristine models for craters of similar size. The low ratio is related to the presence of a loosely consolidated regolith and early‐stage eolian infill. Rim heights have an average height to diameter ratio of ~0.03 for the most pristine class. The size‐frequency distribution of RECs, plotted using cumulative and differential methods, indicates that crater classes within the diameter range of 200 m to 1.2 km are separated by ~100 to 200 Myr. Smaller craters degrade faster, with classes separated by <100 Myr. Rim erosion can be entirely modeled by nonlinear diffusional processes using the calculated timescales and a constant diffusivity of 8 × 10 −7 m 2 /year for craters 200 to 500 m in diameter. Diffusion models only partly capture depth‐related degradation, which requires eolian infill. Depth degradation and rim erosion rates are 10 −2 to 10 −3 m/Myr, respectively. The rates are consistent with relatively slow modification that is typical of the last two epochs of Martian history.

Journal of Geophysical Research - Planets↗
USGS2020

A lacustrine paleoenvironment recorded at Vera Rubin ridge, Gale crater: Overview of the sedimentology and stratigraphy observed by the Mars Science Laboratory Curiosity rover

For ~500 Martian solar days (sols), the Mars Science Laboratory team explored Vera Rubin ridge (VRR), a topographic feature on the northwest slope of Aeolis Mons. Here we review the sedimentary facies and stratigraphy observed during sols 1,800–2,300, covering more than 100 m of stratigraphic thickness. Curiosity's traverse includes two transects across the ridge, which enables investigation of lateral variability over a distance of ~300 m. Three informally named stratigraphic members of the Murray formation are described: Blunts Point, Pettegrove Point, and Jura, with the latter two exposed on VRR. The Blunts Point member, exposed just below the ridge, is characterized by a recessive, fine-grained facies that exhibits extensive planar lamination and is crosscut by abundant curvi-planar veins. The Pettegrove Point member is more resistant, fine-grained, thinly planar laminated, and contains a higher abundance of diagenetic concretions. Conformable above the Pettegrove Point member is the Jura member, which is also fine-grained and parallel stratified, but is marked by a distinct step in topography, which coincides with localized meter-scale inclined strata, a thinly and thickly laminated facies, and occasional crystal molds. All members record low-energy lacustrine deposition, consistent with prior observations of the Murray formation. Uncommon outcrops of low-angle stratification suggest possible subaqueous currents, and steeply inclined beds may be the result of slumping. Collectively, the rocks exposed at VRR provide additional evidence for a long-lived lacustrine environment (in excess of 10 6 years via comparison to terrestrial records of sedimentation), which extends our understanding of the duration of habitable conditions in Gale crater.

Journal of Geophysical Research: Planets↗
USGS2020

The chemostratigraphy of the Murray formation and role of diagenesis at Vera Rubin ridge in Gale crater, Mars, as observed by the ChemCam instrument

Geochemical results are presented from Curiosity’s exploration of the Vera Rubin ridge (VRR), in addition to the full chemostratigraphy of the predominantly lacustrine mudstone Murray formation up to and including VRR. VRR is a prominent ridge flanking Aeolis Mons (informally Mt. Sharp), the central mound in Gale crater, Mars, and was a key area of interest for the Mars Science Laboratory mission. ChemCam data show that VRR is overall geochemically similar to lower-lying members of the Murray formation, even though the top of VRR is characterized by strong hematite spectral signatures as observed from orbit. While overall geochemically similar, VRR is characterized by a prominent decrease in Li abundance and Chemical Index of Alteration across the ridge. This decrease follows the morphology of the ridge rather than elevation and is inferred to reflect a non-depositionally controlled decrease in clay mineral abundance in VRR rocks. Additionally, a notable enrichment in Mn above baseline levels is observed on VRR. While not supporting a single model, the results suggest that VRR rocks were likely affected by multiple episodes of post-depositional groundwater interactions that made them more erosionally resistant than surrounding Murray rocks – thus resulting in the modern-day ridge after subsequent erosion.

Journal of Geophysical Research: Planets↗
USGS2020

Ancient Martian aeolian sand dune deposits recorded in the stratigraphy of Valles Marineris and implications for past climates

Aeolian sediment transport, deposition, and erosion have been ongoing throughout Mars's history. This record of widespread aeolian processes is preserved in landforms and geologic units that retain important clues about past environmental conditions including wind patterns. In this study we describe landforms within Melas Chasma, Valles Marineris, that occur in distinct groups with linear to crescentic shapes, arranged with a characteristic wavelength; some possess slope profiles analogous to modern sand dunes yet show evidence for lithification. Based on the features' dimensions, asymmetry, and spatial patterns relative to modern equivalents, we interpret these landforms to be two classes of aeolian bedforms: decameter‐scale megaripples and sand dunes. The presence of superposed erosional features and depositional units indicates that these landforms were cemented and likely ancient. Melas paleodunes are found atop Hesperian‐aged layered deposits, but we estimate them to be younger, likely lithified in the Amazonian period. Although a range of degradation was observed, some paleodunes are >10 m tall and maintain steep lee sides (>25°), an uncommon scenario for terrestrial examples as other geologic processes lead to dune obliteration. The preserved paleobedform geometries are largely consistent with those of modern aeolian indicators, suggesting no major shifts in wind regime or contributing boundary conditions. Finally, we propose that their appearance and context require sequential periods of dune migration, stabilization following catastrophic burial, cementation, differential erosion, exposure, and burial. The presence of wholly preserved duneforms appears to be more common on Mars compared to the Earth and may signal something important about Martian landscape evolution.

Journal of Geophysical Research: Planets↗
USGS2020

Evidence for a diagenetic origin of Vera Rubin Ridge, Gale Crater, Mars: Summary and synthesis of Curiosity's exploration campaign

This paper provides an overview of the Curiosity rover's exploration at Vera Rubin ridge (VRR) and summarizes the science results. VRR is a distinct geomorphic feature on lower Aeolis Mons (informally known as Mount Sharp) that was identified in orbital data based on its distinct texture, topographic expression, and association with a hematite spectral signature. Curiosity conducted extensive remote sensing observations, acquired data on dozens of contact science targets, and drilled three outcrop samples from the ridge, as well as one outcrop sample immediately below the ridge. Our observations indicate that strata composing VRR were deposited in a predominantly lacustrine setting and are part of the Murray formation. The rocks within the ridge are chemically in family with underlying Murray formation strata. Red hematite is dispersed throughout much of the VRR bedrock, and this is the source of the orbital spectral detection. Gray hematite is also present in isolated, gray‐colored patches concentrated toward the upper elevations of VRR, and these gray patches also contain small, dark Fe‐rich nodules. We propose that VRR formed when diagenetic event(s) preferentially hardened rocks, which were subsequently eroded into a ridge by wind. Diagenesis also led to enhanced crystallization and/or cementation that deepened the ferric‐related spectral absorptions on the ridge, which helped make them readily distinguishable from orbit. Results add to existing evidence of protracted aqueous environments at Gale crater and give new insight into how diagenesis shaped Mars' rock record.

Journal of Geophysical Research: Planets↗
USGS2021

Widespread exposures of extensive clean shallow ice in the mid-latitudes of Mars

Although ice in the Martian midlatitudes is typically covered by a layer of dust or regolith, it is exposed in some locations by fresh impact craters or in erosional scarps. In both cases, the exposed ice is massive or excess ice with a low lithic content. We find that erosional scarps occur between 50° and 61° north and south latitude and that they are concentrated in and near Milankovič crater in the northern hemisphere and southeast of the Hellas basin in the southern hemisphere. These may represent locations of particularly thick or clean bodies of ice. Pits created by retreat of the scarps represent sublimation-thermokarst landforms that evolve in a manner distinct from other ice-loss landforms on Mars. New impact craters reveal that clean subsurface ice is widespread at middle- and high-latitudes in both hemispheres at depths less than 1 m. Both the depth to ice and the ice content appear to exhibit significant variability over tens to hundreds of meters. The lowest-latitude exposed ice is near 39°N and is at the edge of a region where impact exposures between 40° and 50°N are common, consistent with other indications of a high ice content. This lowest-latitude ice may be currently unstable and subliming. Impact craters on lineated valley fill excavate ice blocks that may represent the top of debris-covered glacial ice. Together, these landforms indicate widespread, clean subsurface ice at middle-latitudes on Mars. The distribution and properties of this ice could provide information about past climate conditions.

Journal of Geophysical Research: Planets↗