Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal of Geomorphology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources
USGS2004

Spatial and temporal patterns of debris flow deposition in the Oregon Coast Range, USA

Patterns of debris-flow occurrence were investigated in 125 headwater basins in the Oregon Coast Range. Time since the previous debris-flows was established using dendrochronology, and recurrence interval estimates ranged from 98 to 357 years. Tributary basins with larger drainage areas had a greater abundance of potential landslide source areas and a greater frequency of scouring events compared to smaller basins. The flux rate of material delivered to the confluence with a larger river influenced the development of small-scale debris-flow fans. Fans at the mouths of tributary basins with smaller drainage areas had a higher likelihood of being eroded by the mainstem river in the interval between debris-flows, compared to bigger basins that had larger, more persistent fans. Valley floor width of the receiving channel also influenced fan development because it limited the space available to accommodate fan formation. Of 63 recent debris-flows, 52% delivered sediment and wood directly to the mainstem river, 30% were deposited on an existing fan before reaching the mainstem, and 18% were deposited within the confines of the tributary valley before reaching the confluence. Spatial variation in the location of past and present depositional surfaces indicated that sequential debris-flow deposits did not consistently form in the same place. Instead of being spatially deterministic, results of this study suggest that temporally variable and stochastic factors may be important for predicting the runout length of debris-flows.

Oregon↗
USGS2015

Trends in publications in fluvial geomorphology over two decades: A truly new era in the discipline owing to recent technological revolution?

Trends in the field of fluvial geomorphology have been reviewed by a number of authors, who have emphasized the dramatic change occuring in the field in the last two decades of the twentieth century, largely as a result of technological advances. Nevertheless, no prior authors have systematically compiled data on publications in fluvial geomorphology over a long period and statistically analyzed the resulting data set. In this contribution we present a quantitative analysis of fluvial geomorphology papers published in the twenty-two-year period 1987–2009 in five journals of the discipline with a more specific focus on Geomorphology and Earth Surface Processes and Landforms ( ESPL ), identifying authorships, geographic origin of authors, and spatial and temporal scales covered. We also documented the tools employed, demonstrating the transformation of the field with the emergence of new tools over this period, and conducted a cluster to highlight links between tools and a set of factors (country of author's origin, journals, time, and spatial and temporal scales). Of the 1717 papers published in the five journals during this period, the results showed an increased diversity in the nationality of the first author, mainly when dealing with present time scale, and channel feature. Our data show a significant change in methods used in the field as a result of the increase in data availability and new sources of information from remote sensing (ground, airborne and, satellite). Clearly, a new era in knowledge production is observed since 2000, showing the emergence of a second period of active quantification and an internationalization of the fields.

Geomorphology↗
USGS1994

A 4500-year record of large floods on the Colorado River in the Grand Canyon, Arizona

A sequence of flood deposits left by the Colorado River in the Grand Canyon, Arizona, provides evidence of at least 15 floods with peak discharges greater than over the last 4500 yr. Ten floods during the last 2000-2300 yr had discharges greater than . One flood, 1600-1200 yr ago, had a discharge exceeding , a flow rate more than twice the largest gaged flood. This record of flooding is one of the longest for a major U.S. river, and, combined with the gaged record of twentieth century floods, allows determination of the frequency and history of large floods that have affected key aspects of Colorado River geomorphology.

Journal of Geology↗
USGS2005

A note on the comparative turbidity of some estuaries of the Americas

Field data from 27 estuaries of the Americas are used to show that, in broad terms, there is a large difference in turbidity between the analyzed east and west-coast estuaries and that tidal range and tidal length have an important influence on that turbidity. Generic, numerical sediment-transport modeling is used to illustrate this influence, which exists over a range of space scales from, e.g., the Rogue River Estuary (few km, few mg l-1) to the Bay of Fundy (hundreds of km, few g l-1). The difference in Pacific and Atlantic seaboard estuarine turbidity for the analyzed estuaries is ultimately related to the broad-scale geomorphology of the two continents.

Journal of Coastal Research↗
USGS2017

Observations and a linear model of water level in an interconnected inlet-bay system

A system of barrier islands and back-barrier bays occurs along southern Long Island, New York, and in many coastal areas worldwide. Characterizing the bay physical response to water level fluctuations is needed to understand flooding during extreme events and evaluate their relation to geomorphological changes. Offshore sea level is one of the main drivers of water level fluctuations in semienclosed back-barrier bays. We analyzed observed water levels (October 2007 to November 2015) and developed analytical models to better understand bay water level along southern Long Island. An increase (∼0.02 m change in 0.17 m amplitude) in the dominant M 2 tidal amplitude (containing the largest fraction of the variability) was observed in Great South Bay during mid-2014. The observed changes in both tidal amplitude and bay water level transfer from offshore were related to the dredging of nearby inlets and possibly the changing size of a breach across Fire Island caused by Hurricane Sandy (after December 2012). The bay response was independent of the magnitude of the fluctuations (e.g., storms) at a specific frequency. An analytical model that incorporates bay and inlet dimensions reproduced the observed transfer function in Great South Bay and surrounding areas. The model predicts the transfer function in Moriches and Shinnecock bays where long-term observations were not available. The model is a simplified tool to investigate changes in bay water level and enables the evaluation of future conditions and alternative geomorphological settings.

Journal of Geophysical Research C: Oceans↗
USGS2010

Testing statistical self-similarity in the topology of river networks

Recent work has demonstrated that the topological properties of real river networks deviate significantly from predictions of Shreve's random model. At the same time the property of mean self-similarity postulated by Tokunaga's model is well supported by data. Recently, a new class of network model called random self-similar networks (RSN) that combines self-similarity and randomness has been introduced to replicate important topological features observed in real river networks. We investigate if the hypothesis of statistical self-similarity in the RSN model is supported by data on a set of 30 basins located across the continental United States that encompass a wide range of hydroclimatic variability. We demonstrate that the generators of the RSN model obey a geometric distribution, and self-similarity holds in a statistical sense in 26 of these 30 basins. The parameters describing the distribution of interior and exterior generators are tested to be statistically different and the difference is shown to produce the well-known Hack's law. The inter-basin variability of RSN parameters is found to be statistically significant. We also test generator dependence on two climatic indices, mean annual precipitation and radiative index of dryness. Some indication of climatic influence on the generators is detected, but this influence is not statistically significant with the sample size available. Finally, two key applications of the RSN model to hydrology and geomorphology are briefly discussed.

Journal of Geophysical Research F: Earth Surface↗
USGS2009

Review of the geologic history of the Pontchartrain Basin, northern Gulf of Mexico

The Pontchartrain Basin extends over 44,000 km² from northern Mississippi to the Gulf of Mexico and includes one of the largest and most important estuarine systems in the United States. The basin supports a variety of environments, from woodlands in the north to wetlands in the south, and a growing socioeconomic infrastructure that has led to rapid development of the southern half of the basin over the past two centuries. To properly administer this infrastructure, managers need to understand the complex geologic framework of the basin and how it will respond to continued sea-level rise, variable rates and magnitudes of land subsidence, and human alteration of the landscape. This article summarizes the body of work that describes the regional evolution and stratigraphic architecture of the Pontchartrain Basin. The northern two-thirds of the basin is underlain by a stratigraphy of undifferentiated sands and clays deposited throughout the Plio-Pleistocene by glacially influenced rivers. These deposits were weathered and incised by rivers during sea-level low stands, forming a series of terraces that increase with age from south to north. The southern third of the basin is composed of estuaries formed during the Holocene, while shoreline processes created a series of sandy barriers that restricted communication to the Gulf of Mexico. The Mississippi River completed the geologic development of the basin by building a sequence of subdelta lobes along this southern margin over the past 5000 years, further sealing it from the open Gulf of Mexico. Presently, the modern Mississippi River bypasses the estuarine environment and only contributes sediments during flood events when the river overtops the levee system. Sea-level rise, subsidence within the Holocene delta-plain deposits, and movement along numerous fault systems are the active natural processes that continue to affect basin geomorphology.

Louisiana, Mississippi↗
USGS2026

Statewide surficial geologic map of Nebraska underscores Quaternary landscape evolution from the High Plains to the Central Lowland

Surficial geologic mapping in Nebraska has been conducted primarily at the 1:24,000 scale since the mid-1990s, although there have also been limited efforts to map generalized Quaternary and surficial geology within the state and the region. We compiled and evaluated disparate maps (1:24,000–1:1,000,000) and datasets—including geologic, soil and soil parent material, and geomorphic maps as well as LiDAR derivatives—to produce a single 1:500,000 scale surficial geologic map of Nebraska that is the first of its kind. This new map provides a coarse-scale surficial geologic map that will be incorporated into a nationwide U.S. Geological Survey Quaternary geologic map. It also reflects the variation and uniqueness of physical landscapes in the state, where the Great Plains and Central Lowland physiographic provinces meet, further developing a richer interdisciplinary understanding of regional geomorphology in the heart of North America.

Nebraska↗
USGS2018

A spatio-contextual probabilistic model for extracting linear features in hilly terrain from high-resolution DEM data

This paper introduces our research in developing a probabilistic model to extract linear terrain features from high resolution DEM (Digital Elevation Model) data. The proposed model takes full advantage of spatio-contextual information to characterize terrain changes. It first derives a quantifiable measure of spatio-contextual patterns of linear terrain feature, such as ridgelines, valley lines and crater boundaries, and then adopts multiple neighborhood analysis and a probability model to address data uncertainty in terrain surface modeling. Different from traditional approaches, the proposed model has the ability to achieve near-automated processing, and to support effective extraction of terrain features in both smooth and rough surfaces. Through a series of experiments, we demonstrate that the proposed approach outperforms existing techniques, including: thresholding, stream/drainage network analysis, visual descriptor, object-based image analysis and edge detection. We hope this work contributes to both the geospatial data science and geomorphology communities with a new way of utilizing high-resolution imagery in terrain analysis.

International Journal of Geographical Information ↗
USGS2020

Selective sediment transport during Hurricane Sandy on Fire Island (New York, USA): Inferences from heavy-mineral assemblages

In October 2012, Hurricane Sandy caused severe erosion on beaches and dunes of Fire Island (New York, USA). Major shoreline changes occurred with erosional dominance in the upper shoreline and aggradation in the lowermost section of the beach due to the deposition of eroded upper beach and dune sediment. Sand laminations with a high concentration of heavy minerals (“black sand laminations”) were observed in three excavated trenches located on a washover terrace and fan on the east side of Fire Island. The mineralogical composition of these laminations reveals the presence of high quantities of magnetite, ilmenite (as opaque minerals), and garnet (as main translucent mineral). These heavy mineral enriched laminations were formed as waves eroded and transported sand from the primary dune and smaller relict dunes under specific hydrodynamic conditions that promoted grain sorting according to differences in size and specific gravity. Based on the concentrations of certain heavy minerals, the threshold for primarily density-driven sorting probably lies between the specific gravity of a less dense mineral (ilmenite, 4.7) and Garnet almandine (4.3), the most common transparent heavy mineral. The number of laminations and concentrations of heavy minerals vary between trenches on the overwash terrace and appear to be controlled by their distance from sediment sources. The trench with a greatest number of laminations and higher heavy mineral concentrations is located furthest from the main dune but is just 10 m inland of a relict dune that acts as the primary source of sediment of the washover deposit in this trench. A conceptual model for heavy mineral layer deposition is presented based on geomorphological and sedimentological evidences allowing the definition of a density threshold.

New York↗
USGS2014

Spatial distribution of loggerhead turtle ( Caretta caretta ) emergences along a highly dynamic beach in the northern Gulf of Mexico

As coastlines change due to sea level rise and an increasing human presence, understanding how species, such as marine turtles, respond to alterations in habitat is necessary for proper management and conservation. Survey data from a major nesting beach in the northern Gulf of Mexico, where a revetment was installed, was used to assess spatial distribution of loggerhead emergences. Through use of Quadrat analysis and piecewise linear regression with breakpoint, we present evidence to suggest that nest site selection in loggerheads is determined in the nearshore environment, and by characteristics such as wave height, alongshore currents, depth and patterns of erosion and accretion. Areas of relatively dense nesting were found in areas with relatively strong alongshore currents, relatively small waves, a steep offshore slope and the largest historical rates of erosion. Areas of relatively dense nesting also corresponded to areas of low nesting success. Both nesting and non-nesting emergences were clustered immediately adjacent to the revetment and at other eroding sites along the beach. These results suggest that alterations to the nearshore environment from activities such as construction of a jetty, dredging or installation of pilings, may impact sea turtle nest distribution alongshore. We also show that piecewise linear regression with breakpoint is a technique that can be used with geomorphological and oceanographic data to predict locations of nest clumping and may be useful for managers at other nesting beaches.

Florida↗
USGS2001

Digital terrain modelling and industrial surface metrology - Converging crafts

Quantitative characterisation of surface form, increasingly from digital 3-D height data, is cross-disciplinary and can be applied at any scale. Thus, separation of industrial-surface metrology from its Earth-science counterpart, (digital) terrain modelling, is artificial. Their growing convergence presents an opportunity to develop in surface morphometry a unified approach to surface representation. This paper introduces terrain modelling and compares it with metrology, noting their differences and similarities. Examples of potential redundancy among parameters illustrate one of the many issues common to both disciplines. ?? 2001 Elsevier Science Ltd. All rights reserved.

International Journal of Machine Tools and Manufac↗
USGS2020

Geomorphological mapping and anthropogenic landform change in an urbanizing watershed using structure-from-motion photogrammetry and geospatial modeling techniques

Increasing urbanization and suburban growth in cities globally has highlighted the importance of land planning using detailed geomorphologic maps that depict anthropogenic landform changes. Such mapping provides information crucial for land management, hazard identification, and the management of the challenges arising from urbanization. The development and use of quantitative and repeatable methods to map anthropogenic and natural processes are required to advance the science of urban geomorphological mapping. This study investigated the application of geospatial modeling, structure-from-motion (SfM) photogrammetric methods and DEM differencing as means of quantifying anthropogenic landform changes from archival aerial imagery. Anthropogenic landforms were incorporated into a detailed geomorphologic map in an urbanizing watershed located in the Washington, D.C. metropolitan suburb of Vienna, Virginia.

Virginia↗
USGS2007

Ground water stratification and delivery of nitrate to an incised stream under varying flow conditions

Ground water processes affecting seasonal variations of surface water nitrate concentrations were investigated in an incised first-order stream in an agricultural watershed with a riparian forest in the coastal plain of Maryland. Aquifer characteristics including sediment stratigraphy, geochemistry, and hydraulic properties were examined in combination with chemical and isotopic analyses of ground water, macropore discharge, and stream water. The ground water flow system exhibits vertical stratification of hydraulic properties and redox conditions, with sub-horizontal boundaries that extend beneath the field and adjacent riparian forest. Below the minimum water table position, ground water age gradients indicate low recharge rates (2-5 cm yr-1) and long residence times (years to decades), whereas the transient ground water wedge between the maximum and minimum water table positions has a relatively short residence time (months to years), partly because of an upward increase in hydraulic conductivity. Oxygen reduction and denitrification in recharging ground waters are coupled with pyrite oxidation near the minimum water table elevation in a mottled weathering zone in Tertiary marine glauconitic sediments. The incised stream had high nitrate concentrations during high flow conditions when much of the ground water was transmitted rapidly across the riparian zone in a shallow oxic aquifer wedge with abundant outflow macropores, and low nitrate concentrations during low flow conditions when the oxic wedge was smaller and stream discharge was dominated by upwelling from the deeper denitrified parts of the aquifer. Results from this and similar studies illustrate the importance of near-stream geomorphology and subsurface geology as controls of riparian zone function and delivery of nitrate to streams in agricultural watersheds.

Maryland↗
USGS2021

Developing bare-earth digital elevation models from structure-from-motion data on barrier islands

Unoccupied aerial systems can collect aerial imagery that can be used to develop structure-from-motion products with a temporal resolution well-suited to monitoring dynamic barrier island environments. However, topographic data created using photogrammetric techniques such as structure-from-motion represent the surface elevation including the vegetation canopy . Additional processing is required for estimating bare-earth elevation, which is critical for understanding the underlying geomorphology of these islands. In this study, we used a vegetation and elevation survey to produce bare-earth digital elevation models from structure-from-motion-derived elevation products for two sites on Dauphin Island, Alabama (USA). One site was exposed to high wave energy and included a mix of beach, dune, and barrier flat habitats that were dominated by supratidal/upland herbaceous vegetation. The second site was exposed to low wave energy and was dominated by intertidal marsh. Aerial imagery was collected in late fall of 2018 and spring of 2019. We tested several machine learning algorithms for predicting and removing elevation bias for vegetated areas using predictors that included spectral indices from unoccupied aerial systems-based multispectral imagery and landscape position information (e.g., relative topography and distance from shore). Models were developed for each site and season. We also explored how well the model from one season generalized to data from a different season for the same site. For developing initial digital surface models, we found that utilizing a minimum bin algorithm, as opposed to interpolation, led to lower elevation bias. For bias removal, Gaussian process regression performed the best and led to a root mean square error for the bare-earth digital elevation models of around 0.10 m for the high energy site and 0.15 m for the low energy site. Compared to the digital surface models, the root mean square error for the bare-earth digital elevation models was reduced by at least 29 percent for the high energy site and 69 percent for the low energy site. For all models, common predictors included surface elevation, vegetation greenness, and distance from the shoreline. The models produced comparable results when trained using data from a different season. The error estimates for all analyses were within published elevation standards for lidar data for vegetated areas. With calibration, this approach could be portable to other areas or data, such as aerial lidar (conventional or unoccupied), to provide an efficient and repeatable framework for monitoring geomorphology or provide baseline elevations for predicting changes to these environments under future conditions.

Alabama↗
USGS2019

The Miocene Atastra Creek sinter (Bodie Hills volcanic field, California and Nevada): 4D evolution of a geomorphically intact siliceous hot spring deposit

The Atastra Creek siliceous hot spring deposit, or sinter, occurs in the Paramount-Bald Peak alteration zone, due north of the Bodie precious metals mining district in the Miocene Bodie Hills volcanic field, California and Nevada, U.S.A. Distinctive features include its geomorphically intact geyser vent mounds, the presence of growth-fault-stepped sinter terraces that developed westward along a NNW trending fault, and atypical Hg, Sb and As concentrations. High-temperature (>75 °C), subaerial, proximal apron sinter occurs in two settings – (1) radiating botryoidal geyserite in vent mounds and (2) bedded geyserite (columnar, nodular, size-sorted geyser eggs) intercalated with mid- to low-temperature (<60 °C), middle to distal apron terrace sinter. The active geyser vent mounds migrated from south to north across the apron terrace through time. A newly recognized, visually striking type of sinter – termed silica infiltrate herein – formed directly beneath the subaerial geyserite deposits. It is characterized by mainly parallel, thin, irregular beds of white silica with narrow borders of dark blue-gray silica, as well as swirly to globular white silica, all chaotically linked together by silica ‘necks’ and ‘bridges’. The silica infiltrate permeates the pre-existing sinter, and is interpreted to represent super-heated fluid injections into the immediately overlying geyser vent mounds and pools. The adjacent sinter sheets preserve fluid-flow directions of warm-water channels that traversed the discharge apron, including microbial streamer fabric and wavy laminated sinter with flattened bubbles. More distal sinter textures are recorded by rimmed terracettes with mammillated and palisade microbial fabrics and rare, warm pool-related stromatolites. However, plants are absent, probably due to the high metalloids, in particular As. Post-depositional events include an inferred hydrothermal eruption breccia and an interpreted drop in the water table accompanied by incursion of steam acid condensate, as evidenced by pervasive hydrothermal alteration of the Atastra Creek deposits. Hence, the well-exposed sedimentary facies distributions, well-preserved geomorphology, and stratigraphic and structural relationships together allow an unusually complete, paleoenvironmental reconstruction of the Atastra Creek paleohydrothermal deposit.

Journal of Volcanology and Geothermal Research↗
USGS2013

Mitigating the effects of landscape development on streams in urbanizing watersheds

This collaborative study examined urbanization and impacts on area streams while using the best available sediment and erosion control (S&EC) practices in developing watersheds in Maryland, United States. During conversion of the agricultural and forested watersheds to urban land use, land surface topography was graded and vegetation was removed creating a high potential for sediment generation and release during storm events. The currently best available S&EC facilities were used during the development process to mitigate storm runoff water quality, quantity, and timing before entering area streams. Detailed Geographic Information System (GIS) maps were created to visualize changing land use and S&EC practices, five temporal collections of LiDAR (light detection and ranging) imagery were used to map the changing landscape topography, and streamflow, physical geomorphology, and habitat data were used to assess the ability of the S&EC facilities to protect receiving streams during development. Despite the use of the best available S&EC facilities, receiving streams experienced altered flow, geomorphology, and decreased biotic community health. These impacts on small streams during watershed development affect sediment and nutrient loads to larger downstream aquatic ecosystems such as the Chesapeake Bay.

Maryl↗
USGS2004

Fish assemblage structure and relations with environmental conditions in a Rocky Mountain watershed

Fish and habitat were sampled from 110 reaches in the Salt River basin (Idaho and Wyoming) during 1996 and 1997 to assess patterns in fish assemblage structure across a Rocky Mountain watershed. We identified four distinct fish assemblages using cluster analysis: (1) allopatric cutthroat trout (Oncorhynchus clarki (Richardson, 1836)); (2) cutthroat trout - brook trout (Salvelinus fontinalis (Mitchell, 1814)) - Paiute sculpin (Cottus beldingi Eigenmann and Eigenmann, 1891); (3) cutthroat trout - brown trout (Salmo trutta L., 1758) - mottled sculpin (Cottus bairdi Girard, 1850); and (4) Cyprinidae-Catostomidae. The distribution of fish assemblages was explained by thermal characteristics, stream geomorphology, and local habitat features. Reaches with allopatric cutthroat trout and the cutthroat trout - brook trout - Paiute sculpin assemblage were located in high-elevation, high-gradient streams. The other two fish assemblages were generally located in low-elevation streams. Associations between habitat gradients, locations of reaches in the watershed, and occurrence of species were further examined using canonical correspondence analysis. The results suggest that stream geomorphology, thermal conditions, and local habitat characteristics influence fish assemblage structure across a Rocky Mountain watershed, and they provide information on the ecology of individual species that can guide conservation activities. ?? 2004 NRC Canada.

Canadian Journal of Zoology↗