Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “International Journal of Mining and Geological Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

5 recordsLinked to original sources
USGS1989

Behaviour of abandoned room and pillar mines in Illinois

Little comprehensive information has been reported on the behaviour of room-and-pillar mines. The objective of this paper is to present case data on mine failures in the Illinois basin for use in practice. Presented are results of an ongoing study and details on the site characteristics of cases where sags have developed on the surface. Site data are reported to show the geologic, mining, and sag conditions that existed. Sags mainly develop from pillar, floor, or pillar-floor failure. The character of the sags depends upon the type of mine failure as well as the overburden response. Preliminary results show that the statistical no-risk tributary pressure decreases over 300% as the mine age increases from about 2 to 100 years at a long-term value of approximately 300 psi (2070 kPa). As more information is collected and more analysis is done, the allowable tributary pressure can be determined for different site conditions. A plot is also reported that depicts the relationship of the maximum subsidence to site conditions. It was found that the modified subsidence factor was heavily dependent upon the overburden rock thickness. ?? 1989 Chapman & Hall Ltd.

International Journal of Mining and Geological Eng↗
USGS2008

Mineral Commodity Summaries 2008

Each chapter of the 2008 edition of the U.S. Geological Survey (USGS) Mineral Commodity Summaries (MCS) includes information on events, trends, and issues for each mineral commodity as well as discussions and tabular presentations on domestic industry structure, Government programs, tariffs, 5-year salient statistics, and world production and resources. The MCS is the earliest comprehensive source of 2007 mineral production data for the world. More than 90 individual minerals and materials are covered by two-page synopses. National reserves and reserve base information for most mineral commodities found in this report, including those for the United States, are derived from a variety of sources. The ideal source of such information would be comprehensive evaluations that apply the same criteria to deposits in different geographic areas and report the results by country. In the absence of such evaluations, national reserves and reserve base estimates compiled by countries for selected mineral commodities are a primary source of national reserves and reserve base information. Lacking national assessment information by governments, sources such as academic articles, company reports, common business practice, presentations by company representatives, and trade journal articles, or a combination of these, serve as the basis for national reserves and reserve base information reported in the mineral commodity sections of this publication. A national estimate may be assembled from the following: historically reported reserves and reserve base information carried for years without alteration because no new information is available; historically reported reserves and reserve base reduced by the amount of historical production; and company reported reserves. International minerals availability studies conducted by the U.S. Bureau of Mines, before 1996, and estimates of identified resources by an international collaborative effort (the International Strategic Minerals Inventory) are the basis for some reserves and reserve base estimates. The USGS collects information about the quantity and quality of mineral resources but does not directly measure reserves, and companies or governments do not directly report reserves or reserve base to the USGS. Reassessment of reserves and reserve base is a continuing process and the intensity of this process differs for mineral commodities, countries, and time period. Abbreviations and units of measure, and definitions of selected terms used in the report, are in Appendix A and Appendix B, respectively. A resource/reserve classification for minerals, based on USGS Circular 831 (published with the U.S. Bureau of Mines) is Appendix C, and a directory of USGS minerals information country specialists and their responsibilities is Appendix D. The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the MCS 2008 are welcomed.

Mineral Commodity Summaries↗
USGS2009

Mineral Commodity Summaries 2009

Each chapter of the 2009 edition of the U.S. Geological Survey (USGS) Mineral Commodity Summaries (MCS) includes information on events, trends, and issues for each mineral commodity as well as discussions and tabular presentations on domestic industry structure, Government programs, tariffs, 5-year salient statistics, and world production and resources. The MCS is the earliest comprehensive source of 2008 mineral production data for the world. More than 90 individual minerals and materials are covered by two-page synopses. For mineral commodities for which there is a Government stockpile, detailed information concerning the stockpile status is included in the two-page synopsis. Because specific information concerning committed inventory was no longer available from the Defense Logistics Agency, National Defense Stockpile Center, that information, which was included in earlier Mineral Commodity Summaries publications, has been deleted from Mineral Commodity Summaries 2009. National reserves and reserve base information for most mineral commodities found in this report, including those for the United States, are derived from a variety of sources. The ideal source of such information would be comprehensive evaluations that apply the same criteria to deposits in different geographic areas and report the results by country. In the absence of such evaluations, national reserves and reserve base estimates compiled by countries for selected mineral commodities are a primary source of national reserves and reserve base information. Lacking national assessment information by governments, sources such as academic articles, company reports, common business practice, presentations by company representatives, and trade journal articles, or a combination of these, serve as the basis for national reserves and reserve base information reported in the mineral commodity sections of this publication. A national estimate may be assembled from the following: historically reported reserves and reserve base information carried for years without alteration because no new information is available; historically reported reserves and reserve base reduced by the amount of historical production; and company reported reserves. International minerals availability studies conducted by the U.S. Bureau of Mines, before 1996, and estimates of identified resources by an international collaborative effort (the International Strategic Minerals Inventory) are the basis for some reserves and reserve base estimates. The USGS collects information about the quantity and quality of mineral resources but does not directly measure reserves, and companies or governments do not directly report reserves or reserve base to the USGS. Reassessment of reserves and reserve base is a continuing process, and the intensity of this process differs for mineral commodities, countries, and time period. Abbreviations and units of measure, and definitions of selected terms used in the report, are in Appendix A and Appendix B, respectively. A resource/reserve classification for minerals, based on USGS Circular 831 (published with the U.S. Bureau of Mines) is Appendix C, and a directory of USGS minerals information country specialists and their responsibilities is Appendix D. The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the MCS 2009 are welcomed.

Mineral Commodity Summaries↗
USGS2010

Mineral Commodity Summaries 2010

Each chapter of the 2010 edition of the U.S. Geological Survey (USGS) Mineral Commodity Summaries (MCS) includes information on events, trends, and issues for each mineral commodity as well as discussions and tabular presentations on domestic industry structure, Government programs, tariffs, 5-year salient statistics, and world production and resources. The MCS is the earliest comprehensive source of 2009 mineral production data for the world. More than 90 individual minerals and materials are covered by two-page synopses. For mineral commodities for which there is a Government stockpile, detailed information concerning the stockpile status is included in the two-page synopsis. National reserves information for most mineral commodities found in this report, including those for the United States, are derived from a variety of sources. The ideal source of such information would be comprehensive evaluations that apply the same criteria to deposits in different geographic areas and report the results by country. In the absence of such evaluations, national reserves estimates compiled by countries for selected mineral commodities are a primary source of national reserves information. Lacking national assessment information by governments, sources such as academic articles, company reports, presentations by company representatives, and trade journal articles, or a combination of these, serve as the basis for national reserves information reported in the mineral commodity sections of this publication. A national estimate may be assembled from the following: historically reported reserves information carried for years without alteration because no new information is available; historically reported reserves reduced by the amount of historical production; and company reported reserves. International minerals availability studies conducted by the U.S. Bureau of Mines (USBM), before 1996, and estimates of identified resources by an international collaborative effort (the International Strategic Minerals Inventory) are the basis for some reserves estimates. The USGS collects information about the quantity and quality of mineral resources but does not directly measure reserves, and companies or governments do not directly report reserves to the USGS. Reassessment of reserves is a continuing process, and the intensity of this process differs for mineral commodities, countries, and time period. Throughout the history of Mineral Commodity Summaries and its predecessor prior to 1978, Commodity Data Summaries, the presentation of resource data has evolved. Although world resources have been discussed each year, presentation of reserves and reserve base data varied. From 1957 through 1979, only reserves information was published in the reports, but from 1980 through 1987, only estimates of reserve base, a concept introduced by the U.S. Bureau of Mines (USBM) and the USGS in 1980, were published. Beginning in 1988, both reserves and reserve base information were listed for each mineral commodity where applicable and available. Prior to 1996, the minerals availability studies conducted by the USBM and work with international collaborators were the basis for reserve base data reported in Mineral Commodity Summaries. When the USBM was closed in 1996, this function was discontinued. Since that time, reserve base estimates have been updated to be consistent with changes in reserves, but the nonreserves component of the information upon which the reserve base data were estimated is not current enough to support defensible reserve base estimates. For that reason, publication of reserve base estimates was discontinued for Mineral Commodity Summaries 2010. Abbreviations and units of measure, and definitions of selected terms used in the report, are in Appendix A and Appendix B, respectively. A resource/reserve classification for minerals, based on USGS Circular 831 (published with the U.S. Bureau of Mines) is Appendix C, and a directory of USGS minerals information country specialists and their responsibilities is Appendix D. The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the MCS 2010 are welcomed.

Mineral Commodity Summaries↗
USGS1968

The relationship of geophysical measurements to engineering and construction parameters in the Straight Creek Tunnel pilot bore, Colorado

Seismic-refraction and electrical-resistivity measurements made along the walls of the Straight Creek Tunnel pilot bore indicate that both a low-velocity and a high-resistivity layer exist in the disturbed rock surrounding the excavation. Seismic measurements were analyzed to obtain the thickness and seismic velocity of rock in the low-velocity layer, the velocity of rock behind the layer and the amplitude of seismic energy received at the detectors. Electrical-resistivity measurements were analyzed to obtain the thickness and electrical resistivity of the high-resistivity layer and the resistivity of rock behind the layer. The electrical resistivity and the seismic velocity of rock at depth, the thickness of rock in the low-velocity layer, and the relative amplitude of seismic energy were correlated against the following parameters, all of which are important in tunnel construction: height of the tension arch, stable vertical rock load, rock quality, rate of construction and cost per foot, percentage of lagging and blocking, set spacing, and type and amount of steel support required, The correlations were statistically meaningful, having correlation coefficients ranging in absolute value from about 0·7 to nearly 1·0. This finding suggests the possibility of predicting parameters of interest in tunnel construction from geophysical measurements made in feeler holes drilled ahead of a working face. Predictions might be based on correlations established either during the early stages of construction or from geophysical surveys in other tunnels of similar design in similar geologic environments.

Colorado↗