SEARCH · Geology Reports

Results for “Himalayan Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

17 recordsLinked to original sources

USGS2011

Neotectonic inversion of the Hindu Kush-Pamir mountain region

The Hindu Kush-Pamir region of southern Asia is one of Earth's most rapidly deforming regions and it is poorly understood. This study develops a kinematic model based on active faulting in this part of the Trans-Himalayan orogenic belt. Previous studies have described north-verging thrust faults and some strike-slip faults, reflected in the northward-convex geomorphologic and structural grain of the Pamir Mountains. However, this structural analysis suggests that contemporary tectonics are changing the style of deformation from north-verging thrusts formed during the initial contraction of the Himalayan orogeny to south-verging thrusts and a series of northwest-trending, dextral strike-slip faults in the modern transpressional regime. These northwest-trending fault zones are linked to the major right-lateral Karakoram fault, located to the east, as synthetic, conjugate shears that form a right-stepping en echelon pattern. Northwest-trending lineaments with dextral displacements extend continuously westward across the Hindu Kush-Pamir region indicating a pattern of systematic shearing of multiple blocks to the northwest as the deformation effects from Indian plate collision expands to the north-northwest. Locally, east-northeast- and northwest-trending faults display sinistral and dextral displacement, respectively, yielding conjugate shear pairs developed in a northwest-southeast compressional stress field. Geodetic measurements and focal mechanisms from historical seismicity support these surficial, tectono-morphic observations. The conjugate shear pairs may be structurally linked subsidiary faults and co-seismically slip during single large magnitude (> M7) earthquakes that occur on major south-verging thrust faults. This kinematic model provides a potential context for prehistoric, historic, and future patterns of faulting and earthquakes.

Himalayan Geology↗

USGS1975

Reconnaissance of the geology and ore mineralization in part of the Chagai District, Pakistan

The Chagai District of the Quetta Division is in the northwestern part of Pakistan. Igneous activity during the Himalayan orogeny included the extrusion of horizontally layered andesites of the Cretaceous Sinjrani Volcanic Group, emplacement of monzonitic stocks of the Cretaceous Chagai intrusions, and the extrusion of flows and tuffs of the Koh-i-Sultan Volcanic Group during the Pleistocene.

Open-File Report↗

USGS2013

Sedimentary history of the Tethyan margins of eastern Gondwana during the Mesozoic

A composite Mesozoic geological history for the Gondwana margins to the Eastern Tethys Ocean can be assembled from stratigraphic successions on the Australian and Himalayan margins and from drill sites of Ocean Drilling Program Legs 122 and 123. During the Triassic, this region drifted northwards, entering tropical paleolatitudes during the Late Triassic-Early Jurassic, then returned to mid-latitudes for the Middle Jurassic through Early Cretaceous. Shallow-water carbonates are restricted to the tropical-latitude interval; at other times, the margins are dominated by clastic deposition. Episodes of deltaic sandstone progradation over the shelves are caused by eustatic sealevel fluctuations, by wet climatic conditions within the source regions and by local tectonic activity. A major hiatus between Callovian shallow-water shelf deposits and Oxfordian deep-water sediments is an ubiquitous feature, which may be related to a widespread plate tectonic reorganization and the cascading effects of associated sealevel rise and elevated carbon dioxide levels. Off Northwest Australia, this Callovian/Oxfordian event also coincides with an episode of block faulting. Marginal sediments deposited during the Late Jurassic are mainly marine claystone containing abundant terrigenous organic matter. Shallow depths of carbonate compensation (CCD) during the Late Jurassic through Early Cretaceous prevented the preservation of carbonate over most of the Argo basin off Northwest Australia, and these deep-sea sediments consist mainly of condensed, oxygenated radiolarian-rich claystone. During the late Kimmeridgian-early Tithonian, a downward excursion in the CCD enabled limited preservation of some larger nannofossils and mollusc fragments within the pelagic deposits, a feature also recorded in coeval deposits in the Atlantic. Explosive volcanism accompanied the final stages of rifting between India and Australia during the late Berriasian and Valanginian, producing volcaniclastic debris washing into the deltas and widespread ash deposits. The late Barremian and Aptian sediments indicate a rise in the CCD, accompanied by warming of the region and an increased delivery of organic-rich claystone into the basins.

Book chapter↗

USGS1986

Geology of the petroleum and coal deposits in the North China basin, eastern China

The North China basin evolved initially from a rifted intracratonic graben system on the east-central Sino-Korean platform during the Jurassic and Cretaceous Yanshanian orogeny. The basin reached its maximum stage of development in the Neogene owing to rift reactivation by the Himalayan orogeny. As indicated by geophysical data, extensional rifting within the basin is still active today.

North China basin↗

USGS1994

Block versus continuum deformation in the Western United States

The relative role of block versus continuum deformation of continental lithosphere is a current subject of debate. Continuous deformation is suggested by distributed seismicity at continental plate margins and by cumulative seismic moment sums which yield slip estimates that are less than estimates from plate motion studies. In contrast, block models are favored by geologic studies of displacement in places like Asia. A problem in this debate is a lack of data from which unequivocal conclusions may be reached. In this paper we apply the techniques of study used in regions such as the Alpine-Himalayan belt to an area with a wealth of instrumental data-the Western United States. By comparing plate rates to seismic moment release rates and assuming a typical seismogenic layer thickness of 15 km it appears that since 1850 about 60% of the Pacific-North America motion across the plate boundary in California and Nevada has occurred seismically and 40% aseismically. The San Francisco Bay area shows similar partitioning between seismic and aseismic deformation, and it can be shown that within the seismogenic depth range aseismic deformation is concentrated near the surface and at depth. In some cases this deformation can be located on creeping surface faults, but elsewhere it is spread over a several kilometer wide zone adjacent to the fault. These superficial creeping deformation zones may be responsible for the palaeomagnetic rotations that have been ascribed elsewhere to the surface expression of continuum deformation in the lithosphere. Our results support the dominant role of non-continuum deformation processes with the implication that deformation localization by strain softening must occur in the lower crust and probably the upper mantle. Our conclusions apply only to the regions where the data are good, and even within the Western United States (i.e., the Basin and Range) deformation styles remain poorly resolved. Nonetheless, we maintain that block motion is the deformation style of choice for those continental regions where the data are best.

Earth and Planetary Science Letters↗

USGS2010

Proceedings of the 25th Himalaya-Karakoram-Tibet Workshop

For a quarter of a century the Himalayan-Karakoram-Tibet (HKT) Workshop has provided scientists studying the India-Asia collision system a wonderful opportunity for workshop-style discussion with colleagues working in this region. In 2010, HKT returns to North America for the first time since 1996. The 25th international workshop is held from June 7 to10 at San Francisco State University, California. The international community was invited to contribute scientific papers to the workshop, on all aspects of geoscience research in the geographic area of the Tibetan Plateau and its bounding ranges and basins, from basic mapping to geochemical and isotopic analyses to large-scale geophysical imaging experiments. In recognition of the involvement of U.S. Geological Survey (USGS) scientists in a wide range of these activities, the USGS agreed to publish the extended abstracts of the numerous components of HKT-25 as an online Open-File Report, thereby ensuring the wide availability and distribution of these abstracts, particularly in the HKT countries from which many active workers are precluded by cost from attending international meetings. In addition to the workshop characterized by contributed presentations, participants were invited to attend a pre-meeting field trip from the Coast Ranges to the Sierra Nevada, to allow the international group to consider how the tectonic elements of the Pacific margin compare to those of the Himalayan belt. Following the workshop, the National Science Foundation (NSF) sponsored a workshop on the 'Future directions for NSF-sponsored geoscience research in the Himalaya/Tibet' intended to provide NSF Program Directors with a clear statement and vision of community goals for the future, including the scientific progress we can expect if NSF continues its support of projects in this geographic region, and to identify which key geoscience problems and processes are best addressed in the Himalaya and Tibet, what key datasets are needed, and how NSF can best support the evolving need for interdisciplinary investigations. This workshop also has clear societal relevance. Recent earthquakes have brought international attention to active tectonics and earthquake hazards in the HKT region. Prominent examples include the Mw 7.8 Kokoxili (Qinghai, China) earthquake of 2001, the Mw 7.6 Kashmir (Pakistan) earthquake of 2005, the Mw 7.9 Wenchuan (Sichuan, China) earthquake of 2008, and this year the Mw 6.9 Yushu (Qinghai, China) earthquake. Geological and geophysical field work conducted both before these earthquakes, as well as in response to them, has helped to define the active faults and regional tectonics in the HKT region. The research presented at this workshop provides the framework necessary for improved seismic hazard assessments in this region. The organizers gratefully acknowledge the support of NSF's Continental Dynamics Program and its Office of International Science and Engineering, through award EAR-0965796. We thank San Francisco State University's Sheldon Axler, Dean of the College of Science and Engineering, and Toby Garfield, Director of the Romberg Tiburon Center, for use of their conference facilities; and the Department of Geosciences, particularly Deb Shulman and Miriam Knof, for administrative support. The California Academy of Sciences generously hosted a reception for visiting delegates, and Brad Ritts (Chevron Exploration Technology Company), Todd Greene (California State University, Chico) and John Shervais (Utah State University) together co-led the pre-conference field trip. Technical editing of this volume was led by Roxanne Renedo (U.S. Geological Survey) with assistance from Margaret Milia (Stanford University). We are grateful to the U.S. Geological Survey (USGS) Earthquake Hazards Program and the USGS Menlo Park (California) Publishing Service Center for making this online report possible.

Open-File Report↗

USGS2003

Phanerozoic strike-slip faulting in the continental interior platform of the United States: examples from the Laramide Orogen, Midcontinent, and Ancestral Rocky Mountains

The continental interior platform of the United States is that part of the North American craton where a thin veneer of Phanerozoic strata covers Precambrian crystalline basement. N- to NE-trending and W- to NW-trending fault zones, formed initially by Proterozoic/Cambrian rifting, break the crust of the platform into rectilinear blocks. These zones were reactivated during the Phanerozoic, most notably in the late Palaeozoic Ancestral Rockies event and the Mesozoic-Cenozoic Laramide orogeny — some remain active today. Dip-slip reactivation can be readily recognized in cross section by offset stratigraphic horizons and monoclinal fault-propagation folds. Strike-slip displacement is hard to document because of poor exposure. Though offset palaeochannels, horizontal slip lineations, and strain at fault bends locally demonstrate strike-slip offset, most reports of strike-slip movements for interior-platform faults are based on occurrence of map-view belts of en echelon faults and anticlines. Each belt overlies a basement-penetrating master fault, which typically splays upwards into a flower structure. In general, both strike-slip and dip-slip components of displacement occur in the same fault zone, so some belts of en echelon structures occur on the flanks of monoclinal folds. Thus, strike-slip displacement represents the lateral component of oblique fault reactivation; dip-slip and strike-slip components are the same order of magnitude (tens of metres to tens of kilometres). Effectively, faults with strike-slip components of displacement act as transfers accommodating jostling of rectilinear crustal blocks. In this context, the sense of slip on an individual strike-slip fault depends on block geometry, not necessarily on the trajectory of regional σ 1 . Strike-slip faulting in the North American interior differs markedly from that of southern and central Eurasia, possibly because of a contrast in lithosphere strength. Weak Eurasia strained significantly during the Alpine-Himalayan collision, forcing crustal blocks to undergo significant lateral escape. The strong North American craton strained relatively little during collisional-convergent orogeny, so crustal blocks underwent relatively small displacements.

Geological Society Special Publication↗

USGS1959

Ground-water provinces of India

This paper gives a general resume of ground-water utilization and development and describes the occurrence of water in eight ground-water provinces of India. The paper is based in part on observations of the writer during 1951-55 and in part on earlier work of the Geological Survey of India. Ground water has been utilized extensively in India since before the beginning of the Christian era. Currently (1956) ground water is an important source of supply for domestic, stock, municipal, and industrial needs throughout the Republic and is widely used for irrigation in the Peninsular and Ganges-Brahmaputra regions west of longitude 85°. Dug, bored, and drilled wells are the principal means by which ground water is developed, although locally infiltration tunnels or improved springs are used. Methods of lifting or pumping water from wells include the hand line and bucket, the hand-lift pump, the counterpoised sweep, bullocks, and "mote," the water wheel, horizontal and vertical centrifugal pumps, and deep-well turbine pumps. The most common device for lifting water for irrigation is still the time-honored bullock and "mote" (leather bag). However, in modern India there is increasing use of mechanical pumps. With respect to the occurrence of ground water, India can be divided into eight provinces, lying in three major regions, (1) the Peninsular region, (2) the Ganges-Brahmaputra region, and (3) the Himalayan region. The Peninsular region contains six ground-water provinces. Precambrian igneous, metamorphic, and indurated sedimentary rocks and early Tertiary volcanic rocks in three of these provinces yield many small supplies of water, which generally is of good quality but locally is brackish or salty. Cretaceous water-bearing sandstones in another province are moderately productive and in places are developed for large water supplies. Late Tertiary and Quaternary water-bearing sands and gravels in two other provinces sustain many small water supplies and several large water supplies-particularly in the coastal areas of southern India. The Ganges-Brahmaputra region is a single ground-water province in which many tens of thousands of small water supplies and several thousand large supplies are obtained from water-bearing sands and gravels in late Tertiary and Quaternary alluvium. This province constitutes a vast groundwater reservoir, which is the most productive in India. The Himalayan region also is considered as a single province, in which ground water occurs in a series of narrow valleys filled with moderately to highly permeable Quaternary alluvium. These alluvial valleys transmit large quantities of water to the ground-water reservoir in the Ganges-Brahmaputra region.

Economic Geology↗

USGS2006

Terrestrial cosmogenic nuclide surface exposure dating of the oldest glacial successions in the Himalayan orogen: Ladakh Range, northern India

Terrestrial cosmogenic nuclide surface exposure dating of moraine boulders and alluvial fan sediments define the timing of five glacial advances over at least the last five glacial cycles in the Ladakh Range of the Transhimalaya. The glacial stages that have been identified are: the Indus Valley glacial stage, dated at older than 430 ka; the Leh glacial stage occurring in the penultimate glacial cycle or older; the Karglacial stage, occurring during the early part of the last glacial cycle; the Bazgo glacial stage, at its maximum during the middle of the last glacial cycle; and the early Holocene Khalling glacial stage. The exposure ages of the Indus Valley moraines are the oldest observed to date throughout the Himalayan orogen. We observe a pattern of progressively more restricted glaciation during the last five glacial cycles, likely indicating a progressive reduction in the moisture supply necessary to sustain glaciation. A possible explanation is that uplift of Himalayan ranges to the south and/or of the Karakoram Mountains to the west of the region may have effectively blocked moisture supply by the south Asian summer monsoon and mid-latitude westerlies, respectively. Alternatively, this pattern of glaciation may reflect a trend of progressively less extensive glaciation in mountain regions that has been observed globally throughout the Pleistocene. ?? 2006 Geological Society of America.

Geological Society of America Bulletin↗

USGS1991

Sedimentation and tectonics of the Sylhet trough, Bangladesh

The Sylhet trough, a sub-basin of the Bengal Basin in northeastern Bangladesh, contains a thick fill (12 to 16 km) of late Mesozoic and Cenozoic strata that record its tectonic evolution. Stratigraphic, sedimentologic, and petrographic data collected from outcrops, cores, well logs, and seismic lines are here used to reconstruct the history of this trough. The Sylhet trough occupied a slope/basinal setting on a passive continental margin from late Mesozoic through Eocene time. Subsidence may have increased slightly in Oligocene time when the trough was located in the distal part of a foreland basin paired to the Indo-Burman ranges. Oligocene fluvial-deltaic strata (Barail Formation) were derived from incipient uplifts in the eastern Himalayas. Subsidence increased markedly in the Miocene epoch in response to western encroachment of the Indo-Burman ranges. Miocene to earliest Pliocene sediments of the Surma Group were deposited in a large, mud-rich delta system that may have drained a significant proportion of the eastern Himalayas. Subsidence rates in the Sylhet trough increased dramatically (3-8 times) from Miocene to Pliocene-Pleistocene time when the fluvial Tipam Sandstone and Dupi Tila Formation were deposited. This dramatic subsidence change is attributed to south-directed overthrusting of the Shillong Plateau on the Dauki fault for the following reasons. (1) Pliocene and Pleistocene strata thin markedly away from the Shillong Plateau, consistent with a crustal load emplaced on the northern basin margin. (2) The Shillong Plateau is draped by Mesozoic to Miocene rocks, but Pliocene and younger strata are not represented, suggesting that the massif was an uplifted block at this time. (3) South-directed overthrusting of the Shillong Plateau is consistent with gravity data and with recent seismotectonic observations. Sandstone in the Tioam has a marked increase in sedimentary lithic fragments compared to older rocks, reflecting uplift and erosion of the sedimentary cover of the Shillong Plateau. If the Dauki fault has a dip similar to that of other Himalayan overthrusts, then a few tens of kilometers of horizontal tectonic transport would be required to carry the Shillong Plateau to its present elevation. Uplift of the Shillong Plateau probably generated a major (∼300 km) westward shift in the course of the Brahmaputra River.

Geological Society of America Bulletin↗

USGS1989

Geology of the Ulugh Muztagh area, northern Tibet

Within the Ulugh Muztagh area, north central Tibet, an east-west-trending ophiolitic melange marks a suture that apparently was formed during a late Triassic or slightly younger collision between a continental fragment to the south and the rest of Asia. The southern continental fragment carries a thick sequence of upper Triassic sandstone, but the contact between the sandstone and the ophiolitic melange is covered by a younger redbed sequence of unknown age. A suite of 2-mica, tourmaline-bearing leucogranite plutons and dikes intruded the Triassic sandstone at shallow crustal levels 10.5 to 8.4 Ma. These rocks range from granite to tonalite in composition, are geochemically very similar to slightly older High Himalayan leucogranite and are interpreted to have been derived by the partial melting of crustal material. We interpret this to mean that crustal thickening began in this part of the Tibetan plateau at least by 10.5 Ma. Welded rhyolitic tuff rests on a conglomerate that consists of abundant debris from the Ulugh Muztagh intrusive rocks and has yielded Ar Ar ages of about 4 Ma. The tuffs are geochemically identical to the intrusive rocks suggesting that crustal thickening may have continued to 4 Ma. Crustal thickening probably occurred by distributed crustal shortening similar to shortening now occurring north of Ulugh Muztagh along the northern margin of the Tibetan Plateau.

Earth and Planetary Science Letters↗

USGS2007

Map and Database of Probable and Possible Quaternary Faults in Afghanistan

The U.S. Geological Survey (USGS) with support from the U.S. Agency for International Development (USAID) mission in Afghanistan, has prepared a digital map showing the distribution of probable and suspected Quaternary faults in Afghanistan. This map is a key component of a broader effort to assess and map the country's seismic hazards. Our analyses of remote-sensing imagery reveal a complex array of tectonic features that we interpret to be probable and possible active faults within the country and in the surrounding border region. In our compilation, we have mapped previously recognized active faults in greater detail, and have categorized individual features based on their geomorphic expression. We assigned mapped features to eight newly defined domains, each of which contains features that appear to have similar styles of deformation. The styles of deformation associated with each domain provide insight into the kinematics of the modern tectonism, and define a tectonic framework that helps constrain deformational models of the Alpine-Himalayan orogenic belt. The modern fault movements, deformation, and earthquakes in Afghanistan are driven by the collision between the northward-moving Indian subcontinent and Eurasia. The patterns of probable and possible Quaternary faults generally show that much of the modern tectonic activity is related to transfer of plate-boundary deformation across the country. The left-lateral, strike-slip Chaman fault in southeastern Afghanistan probably has the highest slip rate of any fault in the country; to the north, this slip is distributed onto several fault systems. At the southern margin of the Kabul block, the style of faulting changes from mainly strike-slip motion associated with the boundary between the Indian and Eurasian plates, to transpressional and transtensional faulting. North and northeast of the Kabul block, we recognized a complex pattern of potentially active strike-slip, thrust, and normal faults that form a conjugate shear system in a transpressional region of the Trans-Himalayan orogenic belt. The general patterns and orientations of faults and the styles of deformation that we interpret from the imagery are consistent with the styles of faulting determined from focal mechanisms of historical earthquakes. Northwest-trending strike-slip fault zones are cut and displaced by younger, southeast-verging thrust faults; these relations define the interaction between northwest-southeast-oriented contraction and northwest-directed extrusion in the western Himalaya, Pamir, and Hindu Kush regions. Transpression extends into north-central Afghanistan where north-verging contraction along the east-west-trending Alburz-Marmul fault system interacts with northwest-trending strike-slip faults. Pressure ridges related to thrust faulting and extensional basins bounded by normal faults are located at major stepovers in these northwest-trending strike-slip systems. In contrast, young faulting in central and western Afghanistan indicates that the deformation is dominated by extension where strike-slip fault zones transition into regions of normal faults. In addition to these initial observations, our digital map and database provide a foundation that can be expanded, complemented, and modified as future investigations provide more detailed information about the location, characteristics, and history of movement on Quaternary faults in Afghanistan.

Open-File Report↗

USGS1998

Geological setting and petrogenesis of symmetrically zoned, miarolitic granitic pegmatites at Stak Nala, Nanga Parbat - Haramosh Massif, northern Pakistan

Miarolitic granitic pegmatites in the Stak valley in the northeast part of the Nanga Parbat - Haramosh Massif, in northern Pakistan, locally contain economic quantities of bi- and tricolored tourmaline. The pegmatites form flat-lying sills that range from less than 1 m to more than 3 m thick and show symmetrical internal zonation. A narrow outer or border zone of medium-to coarse-grained oligoclase - K-feldspar - quartz grades inward to a very coarse-grained wall zone characterized by K-feldspar - oligoclase - quartz - schorl tourmaline. Radiating sprays of schorl and flaring megacrysts of K-feldspar (intermediate microcline) point inward, indicating progressive crystallization toward the core. The core zone consists of variable mixtures of blocky K-feldspar (intermediate microcline), oligoclase, quartz, and sparse schorl or elbaite, with local bodies of sodic aplite and miarolitic cavities or "pockets". Minor spessartine-almandine garnet and lo??llingite are disseminated throughout the pegmatite, but were not observed in the pockets. The pockets contain well-formed crystals of albite, quartz, K-feldspar (maximum microcline ?? orthoclase overgrowths), schorl-elbaite tourmaline, muscovite or lepidolite, topaz, and small amounts of other minerals. Elbaite is color-zoned from core to rim: green (Fe2+- and Mn2+-bearing), colorless (Mn2+-bearing), and light pink (trace Mn3+). Within ???10 cm of the pegmatites, the granitic gneiss wallrock is bleached owing to conversion of biotite to muscovite, with local quartz and albite added. Schorl is disseminated through the altered gneiss, and veins of schorl with bleached selvages locally traverse the wallrock up to 1 m from the pegmatite contact. The schorl veins can be traced into the outer part of the wall zone, which suggests that they formed from aqueous fluids derived during early saturation of the pegmatite-forming leucogranitic magma rich in H2O, F, B, and Li. Progressive crystallization resulted in a late-stage sodic magma and abundant aqueous fluids. Two late stages of volatile escape are recognized: the first stage caused pressure-quenching of the last magma, which produced aplite and caused albitization (An3 to An8) of earlier crystallized K-feldspar and oligoclase. The second stage, released during the rupture of miarolitic cavities, produced platy albite ("cleavelandite," An1) locally associated with F-rich moscovite and elbaite. Albitization is likely due to cooling of alkali-fluoride-dominated fluids at less than 2 kbar pressure. The pegmatites are derived from Himalayan leucogranitic magma emplaced prior to 5 Ma into granulitic gneiss that was at 300?? to 550??C and 1.5 to 2 kbar. The pegmatites were emplaced during uplift of the Haramosh Massif, since they cross-cut ductile normal faults but are cut by brittle normal faults. Economically important pink tourmaline mineralization formed in pockets concentrated near the crest of a broad antiform, as a result of trapping of late magmatic aqueous fluids that had become Fe-poor owing to the prior crystallization of schorl.

Canadian Mineralogist↗

USGS2014

Himalayan gneiss dome formation in the middle crust and exhumation by normal faulting: New geochronology of Gianbul dome, northwestern India

A general lack of consensus about the origin of Himalayan gneiss domes hinders accurate thermomechanical modeling of the orogen. To test whether doming resulted from tectonic contraction (e.g., thrust duplex formation, antiformal bending above a thrust ramp, etc.), channel flow, or via the buoyant rise of anatectic melts, this study investigates the depth and timing of doming processes for Gianbul dome in the western Himalaya. The dome is composed of Greater Himalayan Sequence migmatite, Paleozoic orthogneiss, and metasedimentary rock cut by multiple generations of leucogranite dikes. These rocks record a major penetrative D2 deformational event characterized by a domed foliation and associated NE-SW–trending stretching lineation, and they are flanked by the top-down-to-the-SW (normal-sense) Khanjar shear zone and the top-down-to-the-NE (normal sense) Zanskar shear zone (the western equivalent of the South Tibetan detachment system). Monazite U/Th-Pb geochronology records (1) Paleozoic emplacement of the Kade orthogneiss and associated granite dikes; (2) prograde Barrovian metamorphism from 37 to 33 Ma; (3) doming driven by upper-crustal extension and positive buoyancy of decompression melts between 26 and 22 Ma; and (4) the injection of anatectic melts into the upper levels of the dome—neutralizing the effects of melt buoyancy and potentially adding strength to the host rock—by ca. 22.6 Ma on the southwestern flank and ca. 21 Ma on the northeastern flank. As shown by a northeastward decrease in 40 Ar/ 39 Ar muscovite dates from 22.4 to 20.2 Ma, ductile normal-sense displacement within the Zanskar shear zone ended by ca. 22 Ma, after which the Gianbul dome was exhumed as part of a rigid footwall block below the brittle Zanskar normal fault, tilting an estimated 5°–10°SW into its present orientation.

Gianbul dome↗

USGS2022

Quaternary fans and terraces in the Khumbu Himal south of Mount Everest: their characteristics, age and formation

Large fans and terraces are frequent in the Khumbu Himal within the high Himalayan valleys south of Mt. Everest. These features are composed of massive matrix- and clast-supported diamicts that were formed from both hyperconcentrated flows and coarse-grained debris flows. Cosmogenic radionuclide (CRN) exposure ages for boulders on fans and terraces indicate that periods of fan and terrace formation occurred at c. 16, c. 12, c. 8, c. 4 and c. 1.5 ka, and are broadly coincident with the timing of glaciation in the region. The dating precision is insufficient to resolve whether the surfaces formed before, during or after the correlated glacial advance. However, the sedimentology, and morphostratigraphic and geomorphological relationships suggest that fan and terrace sedimentation in this part of the Himalaya primarily occurs during glacier retreat and is thus paraglacial in origin. Furthermore, modern glacial-lake outburst floods and their associated deposits are common in the Khumbu Himal as the result of glacial retreat during historical times. We therefore suggest that Late Quaternary and Holocene fan and terrace formation and sediment transfer are probably linked to temporal changes in discharge and sediment load caused by glacier oscillations responding to climate change. The timing of major sedimentation events in this region can be correlated with fans and terraces in other parts of the Himalaya, suggesting that major sedimentation throughout the Himalaya is synchronous and tied to regional climatic oscillations. Bedrock incision rates calculated from strath terrace ages average c. 3.9 mm a −1 , suggesting that the overall rate of incision is set by regional uplift.

Imja Khola Valley, Khumbu Himal, Mount Everest↗

USGS2000

Growth response of a deep-water ferromanganese crust to evolution of the Neogene Indian Ocean

A deep-water ferromanganese crust from a Central Indian Ocean seamount dated previously by 10Be and 230Th(excess) was studied for compositional and textural variations that occurred throughout its growth history. The 10Be/9Be dated interval (upper 32 mm) yields an uniform growth rate of 2.8 ?? 0.1 mm/Ma [Frank, M., O'Nions, R.K., 1998. Sources of Pb for Indian Ocean ferromanganese crusts: a record of Himalayan erosion. Earth Planet. Sci. Lett., 158, pp. 121-130.] which gives an extrapolated age of ~ 26 Ma for the base of the crust at 72 mm and is comparable to the maximum age derived from the Co-model based growth rate estimates. This study shows that Fe-Mn oxyhydroxide precipitation did not occur from the time of emplacement of the seamount during the Eocene (~ 53 Ma) until the late Oligocene (~ 26 Ma). This paucity probably was the result of a nearly overlapping palaeo-CCD and palaeo-depth of crust formation, increased early Eocene productivity, instability and reworking of the surface rocks on the flanks of the seamount, and lack of oxic deep-water in the nascent Indian Ocean. Crust accretion began (older zone) with the formation of isolated cusps of Fe-Mn oxide during a time of high detritus influx, probably due to the early-Miocene intense erosion associated with maximum exhumation of the Himalayas (op. cit.). This cuspate textured zone extends from 72 mm to 42 mm representing the early-Miocene period. Intense polar cooling and increased mixing of deep and intermediate waters at the close of the Oligocene might have led to the increased oxygenation of the bottom-water in the basin. A considerable expansion in the vertical distance between the seafloor depth and the CCD during the early Miocene in addition to the influx of oxygenated bottom-water likely initiated Fe-Mn crust formation. Pillar structure characterises the younger zone, which extends from 40 mm to the surface of the crust, i.e., ~ 15 Ma to Present. This zone is characterised by > 25% higher content of oxide-bound elements than in the older zone, possibly corresponding to further increased oxygenation of bottom-waters, increased stability of the seamount slope, and gradually reduced input of continental detritus from the erosion of the Himalayas. Middle Miocene Antarctic glaciation, which peaked ~ 12-13 Ma ago, increased the oxic bottom-water influx to the basin resulting in accretion of the crust with low detritus. Therefore, the younger crust started to accrete in response to a shift in bottom-water circulation towards the contemporary pattern, which produced a uniform growth rate and pillar structure up to the present. (C) 2000 Published by Elsevier Science B.V.

Marine Geology↗

USGS2007

Nature, diversity of deposit types and metallogenic relations of South China

The South China Region is rich in mineral resources and has a wide diversity of deposit types. The region has undergone multiple tectonic and magmatic events and related metallogenic processes throughout the earth history. These tectonic and metallogenic processes were responsible for the formation of the diverse styles of base and precious metal deposits in South China making it one of the resource-rich regions in the world. During the Proterozoic, the South China Craton was characterised by rifting of continental margin before eruption of submarine volcanics and development of platform carbonate rocks, and the formation of VHMS, stratabound copper and MVT deposits. The Phanerozoic metallogeny of South China was related to opening and closing of the Tethyan Ocean involving multiple orogenies by subduction, back-arc rifting, arc-continent collision and post-collisional extension during the Indosinian (Triassic), Yanshanian (Jurassic to Cretaceous) and Himalayan (Tertiary) Orogenies. The Late Palaeozoic was a productive metallogenic period for South China resulting from break-up and rifting of Gondwana. Significant stratabound base and precious metal deposits were formed during the Devonian and Carboniferous (e.g., Fankou and Dabaoshan deposits). These Late Palaeozoic SEDEX-style deposits have been often overprinted by skarn systems associated with Yanshanian magmatism (e.g., Chengmenshan, Dongguashan and Qixiashan). A number of Late Palaeozoic to Early Mesozoic VHMS deposits also developed in the Sanjiang fold belt in the western part of South China (e.g., Laochang and Gacun). South China has significant sedimentary rock-hosted Carlin-like deposits, which occur in the Devonian- to Triassic-aged accretionary wedge or rift basins at the margin of the South China Craton. They are present in a region at the junction of Yunnan, Guizhou, and Guangxi Provinces called the 'Southern Golden Triangle', and are also present in NW Sichuan, Gansu and Shaanxi, in an area known as the 'Northern Golden Triangle' of China. These deposits are mostly epigenetic hydrothermal micron-disseminated gold deposits with associated As, Hg, Sb + Tl mineralisation similar to Carlin-type deposits in USA. The important deposits in the Southern Golden Triangle are Jinfeng (Lannigou), Zimudang, Getang, Yata and Banqi in Guizhou Province, and the Jinya and Gaolong deposits in Guangxi District. The most important deposits in the Northern Golden Triangle are the Dongbeizhai and Qiaoqiaoshang deposits. Many porphyry-related polymetallic copper-lead-zinc and gold skarn deposits occur in South China. These deposits are related to Indosinian (Triassic) and Yanshanian (Jurassic to Cretaceous) magmatism associated with collision of the South China and North China Cratons and westward subduction of the Palaeo-Pacific Plate. Most of these deposits are distributed along the Lower to Middle Yangtze River metallogenic belt. The most significant deposits are Tonglushan, Jilongshan, Fengshandong, Shitouzui and Jiguanzui. Au-(Ag-Mo)-rich porphyry-related Cu-Fe skarn deposits are also present (Chengmenshan and Wushan in Jiangxi Province and Xinqiao, Mashan-Tianmashan, Shizishan and Huangshilaoshan in Anhui Province). The South China fold belt extending from Fujian to Zhejiang Provinces is characterised by well-developed Yanshanian intrusive to subvolcanic rocks associated with porphyry to epithermal type mineralisation and mesothermal vein deposits. The largest porphyry copper deposit in China, Dexing, occurs in Jiangxi Province and is hosted by Yanshanian granodiorite. The high-sulphidation epithermal system occurs at the Zijinshan district in Fujian Province and epithermal to mesothermal vein-type deposits are also found in the Zhejiang Province (e.g., Zhilingtou). Part of Shandong Province is located at the northern margin of the South China Craton and the province has unique world class granite-hosted orogenic gold deposits. Occurrences of Pt-Pd-Ni-Cu-Co are found in Permian

Ore Geology Reviews↗