Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Biofouling”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources
USGS2016

Spatial variation in biofouling of a unionid mussel ( Lampsilis siliquoidea ) across the western basin of Lake Erie

Invasion of North American waters by nonnative Dreissena polymorpha and D. rostriformis bugensis has resulted in declines of the Unionidae family of native North American mussels. Dreissenid mussels biofoul unionid mussels in large numbers and interfere with unionid movement, their acquisition of food, and the native mussels' ability to open and close their shells. Initial expectations for the Great Lakes included extirpation of unionids where they co-occurred with dreissenids, but recently adult and juvenile unionids have been found alive in several apparent refugia. These unionid populations may persist due to reduced dreissenid biofouling in these areas, and/or due to processes that remove biofoulers. For example locations inaccessible to dreissenid veligers may reduce biofouling and habitats with soft substrates may allow unionids to burrow and thus remove dreissenids. We deployed caged unionid mussels ( Lampsilis siliquoidea ) at 36 sites across the western basin of Lake Erie to assess spatial variation in biofouling and to identify other areas that might promote the persistence or recovery of native unionid mussels. Biofouling ranged from 0.03 – 26.33 g per mussel, reached a maximum in the immediate vicinity of the mouth of the Maumee River, and appeared to primarily consist of dreissenid mussels. A known mussel refugium in the vicinity of a power plant near the mouth of the Maumee actually exhibited very high biofouling rates, suggesting that low dreissenid colonization did not adequately explain unionid survival in this refugium. In contrast, the southern nearshore area of Lake Erie, near another refugium, had very low biofouling. A large stretch of the western basin appeared to have low biofouling rates and muddy substrates, raising the possibility that these open water areas could support remnant and returning populations of unionid mussels. Previous observations of unionid refugia and the occurrence of low biofouling rates in large areas of the western basin of Lake Erie raise the possibility that unionid and dreissenid coexistence may be possible here and elsewhere.

Michigan, Ohio↗
USGS2022

Biofouling of a unionid mussel by dreissenid mussels in nearshore zones of the Great Lakes

In North America, native unionid mussels are imperiled due to factors such as habitat degradation, pollution, and invasive species. One of the most substantial threats is that posed by dreissenid mussels, which are invasive mussels that attach to hard substrates including unionid shells and can restrict movement and feeding of unionids. This dreissenid mussel biofouling of unionids varies spatially in large ecosystems, such as the Great Lakes, with some areas having low enough biofouling to form effective refugia where unionid mussels might persist. Here, we measured biofouling on mussels suspended in cages over the growing season (generally first week in June to last week of August) over 3 years in nearshore areas in Lake Erie (2014–2016), Lake Michigan (Grand Traverse Bay, 2015 and Green Bay, 2016), and Lake Huron (2015). Biofouling varied substantially by years within Lake Erie, with increasingly higher biofouling rates each year. Although dreissenid mussels are present throughout these lakes, we observed very low biofouling in Grand Traverse Bay (Lake Michigan) and Saginaw Bay (Lake Huron), with no dreissenid mussels in 8 of 9 sites across these two bays. Sampling in the rivermouth of the Fox River (Wisconsin) and the Maumee River (Ohio) both showed very high biofouling in areas adjacent to the outlet of these tributaries into Green Bay and Maumee Bay (Lake Erie), respectively. These watersheds are dominated by agriculture, and we would expect high growth of primary producers (i.e., mussel food) and primary consumers (unionids and zebra mussels) in these areas compared to the other sampled bays or the open waters of the Great Lakes.

Michigan, Wisconsin↗
USGS1997

Geochemistry and microbiology of iron-related well-screen encrustation and aquifer biofouling in Suffolk County, Long Island, New York

Iron-related well-screen encrustation and aquifer biofouling has decreased the specific capacity of several production wells in Suffolk County, N.Y., and has forced the Suffolk County Water Authority to adopt a costly well-reconditioning and replacement program. The specific-capacity declines are the result of the precipitation of iron oxyhydroxides and the growth of iron bacteria on the well screens and in the pore spaces of the surrounding formation. Mineralogic and chemical analyses indicate that the inorganic part of the encrusting material consists primarily of amorphous ferric hydroxide (Fe(OH)3 ); minor components of the material include goethite (FeOOH), hematite (Fe2 O 3 ), and quartz (SiO 2 ). The weight percent of ferric hydroxide in the material ranged from 32.3 to 98.6 percent and averaged 64.3 percent. Equilibrium modeling indicated that during pumping the well waters were supersaturated with respect to goethite, hematite, magnetite, and quartz and were under-saturated with respect to ferric hydroxide. Theoretical Eh values computed for the ferrous/ferric-iron redox couple and the oxygen/water redox couple averaged 390 millivolts and 810 millivolts, respectively, indicating that the waters were in a state of redox disequilibrium. The disequilibrium condition arises from the mixing of ground water with a low dissolved-oxygen concentration with oxygenated ground water during operation of the well. The low pH of the ground water contributes to the disequilibrium condition by slowing the rate of iron oxidation after the introduction of oxygen. Chemical and mineralogical data indicate that most of the encrusting material in the wells was deposited while the wells were shut down, probably in response to the use of treated water of higher pH to keep pump turbines wet while the wells were not in operation; the increased pH of water in the static water column increases the rate of ferrous-iron oxidation and causes the well water to become increasingly saturated with respect to ferric hydroxide. The median half-time of oxidation in samples of untreated ground water (pH 4-5) was 4.19 days, whereas the average half-time of oxidation in treated water (pH 7-8) was 11.9 minutes Equilibrium modeling indicated that treated waters generally were supersaturated with respect to ferric hydroxide, whereas untreated well waters were not. Field and laboratory data indicate that iron bacteria play an important role in the encrustation and biofouling process in Suffolk County. Filamentous iron bacteria were common in the affected wells. The most common species was Gallionella ferruginea, an effective biofouling agent that prefers water with low, but detectable, dissolved-oxygen concentrations and high dissolved-iron concentrations; this species was more common in biofilm samples from the Magothy aquifer than in those from the upper glacial aquifer. Iron bacteria also were found in sediment cores from several locations in the aquifer and in drilling water. Lignite could act as a carbon source for heterotrophic iron bacteria, which could accelerate the formation of iron-bacteria biofilms in wells screened in some parts of the Magothy aquifer. Iron-bacteria biofilms alter the chemistry of well water by removing iron, manganese, and sulfate from solution and by increasing the pH. Sulfur-reducing bacteria and iron-sulfide mineral phases were observed in some samples of encrusting material, indicating that these bacteria could contribute to well-screen encrustation in some geochemical environments.

Water-Resources Investigations Report↗
USGS2025

Carbon dioxide infusion reduces invasive mussel biofouling (quagga mussel; Dreissena rostriformis bugensis) in raw water systems

The efficacy of carbon dioxide (CO 2 ) to reduce biofouling by quagga mussels ( Dreissena rostriformis bugensis ) in raw water systems was investigated. Experiments were conducted in a mobile laboratory located at Bureau of Reclamation Davis Dam Hydropower Facility and supplied with raw water from Lake Mohave, a reservoir of the Colorado River, USA. Incoming water was split between five chambers, each infused with CO 2 at a different rate. Raw reservoir water containing quagga larvae (veligers) was mixed with CO 2 chamber outflows and delivered to tanks containing settlement plates. Two experiments were conducted. Experiment 1 tested continuous infusion at target concentrations of 30, 45, 60, 75, and 100 mg L -1 dCO 2 (dissolved CO 2 ). Experiment 2 evaluated intermittent infusion schedules: 24 h on/off with 50, 75, and 100 mg L -1 dCO 2 and 24 h once/week with 100 mg L -1 dCO 2 . In Experiment 1, the percent settlement decreased with mean CO 2 concentration, ranging from 5.0% to < 0.1% in 28.7 and 92.2 mg L -1 dCO 2 , respectively. In Experiment 2, the efficacy of 24 h on/off at dCO 2 > 72.2 mg L -1 was similar to continuous treatment. The least effective treatment was 24 h once weekly at 95 mg L -1 dCO 2 . These results demonstrate that CO 2 treatment may reduce mussel biofouling in raw water systems.

Arizona, Nevada↗
USGS2006

Biofouling and the continuous monitoring of underwater light from a seagrass perspective

For more than a decade, inexpensive electronic instruments have made continuous underwater light monitoring an integral part of many seagrass studies. Although biofouling, if not controlled, compromises the utility of the record. A year-long assessment of the time course of sensor fouling, in the Laguna Madre of Texas established that light transmitted through the fouling layer after 2 wk of exposure exceeded 90% except for a 6–8 wk period in May and June. On that basis, a 2-wk interval was chosen for routine servicing. Subsequent monitoring proved this choice to be grossly in error. The period of sub-90% transmittance after 2 wk extended to 4–6 mo annually over the next 3 yr. Fouling was strongly correlated with temperature, ambient light, and year. Since an algal bloom of 7-yr duration finally waned during this study, increased ambient light seemed most likely to explain increased fouling later in the study. The explanatory value of light was less than temperature or year in multiple regression, requiring some other explanation of the date effect than change in ambient light. Allelopathic and suspension-feeding depressant effects of the brown tide are offered as the most likely cause of unusually low fouling in the first year. Biofouling was so unpredictable and rapid in this study that at least weekly maintenance would be required to assure reliability of the light monitoring record.

Texas↗
USGS1999

Iron in the aquifer system of Suffolk County, New York, 1990-98

High concentrations of dissolved iron in ground water contribute to the biofouling of public-supply wells, and the treatment and remediation of biofouling are costly. Water companies on Long Island, N.Y., spend several million dollars annually to recondition, redevelop, and replace supply wells and distribution lines; treat dissolved iron with sequestering agents or by filtration; and respond to iron-related complaints by customers. This report summarizes the results of studies done by the U.S. Geological Survey, in cooperation with the Suffolk County Water Authority, to characterize the geochemistry and microbiology of iron in the aquifer system of Suffolk County. This information should be helpful for the siting and operation of supply wells. Concentrations of dissolved iron in Long Island's ground water, and the frequency of iron biofouling of wells, are highest in ground-water-discharge zones, particularly near the south shore. Ground water along a deep north-south flowpath of the Magothy aquifer in southwestern Suffolk County becomes anaerobic (oxygen deficient) and Fe(III) reducing at a distance of 8 to 10 kilometers south of the ground-water divide, and this change coincides with the downgradient increase in dissolved iron concentrations. The distribution of organic carbon, and the distribution and local variations in reactivity of Fe(III), in Magothy aquifer sediments have resulted in localized differences in redox microenvironments. For example, Fe(III)-reducing zones are associated with anaerobic conditions, where relatively large amounts of Fe(III) oxyhydroxide grain coatings are present, whereas sulfate-reducing zones are associated with lignite-rich lenses of silt and clay and appear to have developed in response to the depletion of available Fe(III) oxyhydroxides. The sulfate-reducing zones are characterized by relatively low concentrations of dissolved iron (resulting from iron-disulfide precipitation) and may be large enough to warrant water-supply development. Specific-capacity and water-quality data from wells screened in the Magothy aquifer indicate that water from biofouled wells contains higher median concentrations of total and dissolved iron and manganese, total phosphate, and dissolved sulfate, and lower median concentrations of dissolved oxygen and alkalinity, and lower pH, than does water from unaffected wells. Corresponding data from wells screened in the upper glacial aquifer indicate that water from biofouled wells contains higher median concentrations of total and dissolved manganese and dissolved sulfate, and lower pH, than does water from unaffected wells. Filamentous bacteria were detected in 31 (or 72 percent) of the 43 biofilm samples obtained from biofouled wells during reconditioning. The predominant filamentous organism was Gallionella ferruginea, a major biofouling agent in the upper glacial and Magothy aquifers throughout Suffolk County. Mineral-saturation indices indicate that most of the well-encrusting material is deposited when the wells are shut down. Furthermore, the use of treated water (which has a high pH and sometimes high concentrations of dissolved iron) for pump prelubrication when wells are shut down could greatly increase the rate of iron oxidation.

New York↗
USGS1999

Determination of uptake kinetics (sampling rates) by lipid-containing semipermeable membrane devices (SPMDs) for polycyclic aromatic hydrocarbons (PAHs) in water

The use of lipid-containing semipermeable membrane devices (SPMDs) is becoming commonplace, but very little sampling rate data are available for the estimation of ambient contaminant concentrations from analyte levels in exposed SPMDs. We determined the aqueous sampling rates (R(s)s; expressed as effective volumes of water extracted daily) of the standard (commercially available design) 1-g triolein SPMD for 15 of the priority pollutant (PP) polycyclic aromatic hydrocarbons (PAHs) at multiple temperatures and concentrations. Under the experimental conditions of this study, recovery- corrected R(s) values for PP PAHs ranged from ???1.0 to 8.0 L/d. These values would be expected to be influenced by significant changes (relative to this study) in water temperature, degree of biofouling, and current velocity- turbulence. Included in this paper is a discussion of the effects of temperature and octanol-water partition coefficient (K(ow)); the impacts of biofouling and hydrodynamics are reported separately. Overall, SPMDs responded proportionally to aqueous PAH concentrations; i.e., SPMD R(s) values and SPMD-water concentration factors were independent of aqueous concentrations. Temperature effects (10, 18, and 26 ??C) on Rs values appeared to be complex but were relatively small.The use of lipid-containing semipermeable membrane devices (SPMDs) is becoming commonplace, but very little sampling rate data are available for the estimation of ambient contaminant concentrations from analyte levels in exposed SPMDs. We determined the aqueous sampling rates (Rss; expressed as effective volumes of water extracted daily) of the standard (commercially available design) 1-g triolein SPMD for 15 of the priority pollutant (PP) polycyclic aromatic hydrocarbons (PAHs) at multiple temperatures and concentrations. Under the experimental conditions of this study, recovery-corrected Rs values for PP PAHs ranged from ???1.0 to 8.0 L/d. These values would be expected to be influenced by significant changes (relative to this study) in water temperature, degree of biofouling, and current velocity-turbulence. Included in this paper is a discussion of the effects of temperature and octanol-water partition coefficient (KOW); the impacts of biofouling and hydrodynamics are reported separately. Overall, SPMDs responded proportionally to aqueous PAH concentrations; i.e., SPMD RS values and SPMD-water concentration factors were independent of aqueous concentrations. Temperature effects (10, 18, and 26??C) on RS values appeared to be complex but were relatively small.

Environmental Science & Technology↗
USGS2013

In situ spectrophotometric measurement of dissolved inorganic carbon in seawater

Autonomous in situ sensors are needed to document the effects of today&rsquo;s rapid ocean uptake of atmospheric carbon dioxide (e.g., ocean acidification). General environmental conditions (e.g., biofouling, turbidity) and carbon-specific conditions (e.g., wide diel variations) present significant challenges to acquiring long-term measurements of dissolved inorganic carbon (DIC) with satisfactory accuracy and resolution. SEAS-DIC is a new in situ instrument designed to provide calibrated, high-frequency, long-term measurements of DIC in marine and fresh waters. Sample water is first acidified to convert all DIC to carbon dioxide (CO 2 ). The sample and a known reagent solution are then equilibrated across a gas-permeable membrane. Spectrophotometric measurement of reagent pH can thereby determine the sample DIC over a wide dynamic range, with inherent calibration provided by the pH indicator&rsquo;s molecular characteristics. Field trials indicate that SEAS-DIC performs well in biofouling and turbid waters, with a DIC accuracy and precision of &sim;2 &mu;mol kg &ndash;1 and a measurement rate of approximately once per minute. The acidic reagent protects the sensor cell from biofouling, and the gas-permeable membrane excludes particulates from the optical path. This instrument, the first spectrophotometric system capable of automated in situ DIC measurements, positions DIC to become a key parameter for in situ CO 2 -system characterizations.

Environmental Science & Technology↗
USGS2001

Development of the permeability/performance reference compound approach for in situ calibration of semipermeable membrane devices

Permeability/performance reference compounds (PRCs) are analytically noninterfering organic compounds with moderate to high fugacity from semipermeable membrane devices (SPMDs) that are added to the lipid prior to membrane enclosure. Assuming that isotropic exchange kinetics (IEK) apply and that SPMD-water partition coefficients are known, measurement of PRC dissipation rate constants during SPMD field exposures and laboratory calibration studies permits the calculation of an exposure adjustment factor (EAF). In theory, PRC-derived EAF ratios reflect changes in SPMD sampling rates (relative to laboratory data) due to differences in exposure temperature, membrane biofouling, and flow velocity-turbulence at the membrane surface. Thus, the PRC approach should allow for more accurate estimates of target solute/vapor concentrations in an exposure medium. Under some exposure conditions, the impact of environmental variables on SPMD sampling rates may approach an order of magnitude. The results of this study suggest that most of the effects of temperature, facial velocity-turbulence, and biofouling on the uptake rates of analytes with a wide range of hydrophobicities can be deduced from PRCs with a much narrower range of hydrophobicities. Finally, our findings indicate that the use of PRCs permits prediction of in situ SPMD sampling rates within 2-fold of directly measured values.

Environmental Science & Technology↗
USGS2012

Field comparison of optical and clark cell dissolved-oxygen sensors

Three multi-parameter water-quality monitors equipped with either Clark cell type or optical type dissolved-oxygen sensors were deployed for 30 days in a brackish (salinity <10 parts per thousand) environment to determine the sensitivity of the sensors to biofouling. The dissolved-oxygen sensors compared periodically to a hand-held dissolved oxygen sensor, but were not serviced or cleaned during the deployment. One of the Clark cell sensors and the optical sensor performed similarly during the deployment. The remaining Clark cell sensor was not aged correctly prior to deployment and did not perform as well as the other sensors. All sensors experienced substantial biofouling that gradually degraded the accuracy of the dissolved-oxygen measurement during the last half of the deployment period. Copyright ASCE 2005.

Conference Paper↗
USGS1989

The zebra mussel, Dreissena polymorpha (Pallas, 1771), in North America: impact on raw water users

The zebra mussel, Dreissena polymorpha (Pallas), is a small mollusc native to the Black, Caspian, and Azov Seas that was discovered in Lake Erie of the Laurentian Great Lakes of North America in 1988. Its presence there raises immediate concerns for users of raw water because it can become abundant enough to obstruct the flow of water through pipes, hoses, screens, and condensers. Biofouling attributed to this mussel was observed at several power plants, water treatment plants, and food processing and industrial facilities along Lake Erie in 1989. Estimated densities at one power plant intake canal were as high as 700,000 per m2. In addition, large numbers were found in main steam condensors and in the service water system, threatening the water supply for cooling, fire protection, and dust suppression systems. Municipal water intakes along the Canadian and United States shorelines have also been impaired. In one southeast Michigan city, drinking water withdrawal from Lake Erie was reduced 45% by the mussel. Routine checks of raw water supplies for free-floating zebra mussel veligers are reommended to determine if reproducing adult populations are present in local water bodies. After an early alert, raw water intakes could be protected to alleviate damage from the biofouling zebra mussel.

Lake Erie↗
USGS2023

Identifying invasive species threats, pathways, and impacts to improve biosecurity

Managing invasive species with prevention and early-detection strategies can avert severe ecological and economic impacts. Horizon scanning, an evidence-based process combining risk screening and consensus building to identify threats, has become a valuable tool for prioritizing invasive species management and prevention. We assembled a working group of experts from academic, government, and nonprofit agencies and organizations, and conducted a multi-taxa horizon scan for Florida, USA, the first of its kind in North America. Our primary objectives were to identify high-risk species and their introduction pathways, to detail the magnitude and mechanism of potential impacts, and, more broadly, to demonstrate the utility of horizon scanning. As a means to facilitate future horizon scans, we document the process used to generate the list of taxa for screening. We evaluated 460 taxa for their potential to arrive, establish, and cause negative ecological and socioeconomic impacts, and identified 40 potential invaders, including alewife, zebra mussel, crab-eating macaque, and red swamp crayfish. Vertebrates and aquatic invertebrates posed the greatest invasion threat, over half of the high-risk taxa were omnivores, and there was high confidence in the scoring of high-risk taxa. Common arrival pathways were ballast water, biofouling of vessels, and escape from the pet/aquarium/horticulture trade. Competition, predation, and damage to agriculture/forestry/aquaculture were common impact mechanisms. We recommend full risk analysis for the high-risk taxa; increased surveillance at Florida's ports, state borders, and high-risk pathways; and periodic review and revision of the list. Few horizon scans detail the comprehensive methodology (including list-building), certainty estimates for all scoring categories and the final score, detailed pathways, and the magnitude and mechanism of impact. Providing this information can further inform prevention efforts and can be efficiently replicated in other regions. Moreover, harmonizing methodology can facilitate data sharing and enhance interpretation of results for stakeholders and the general public.

Ecosphere↗
USGS2020

Temperature‐related responses of an invasive mussel and 2 unionid mussels to elevated carbon dioxide

Zebra mussels (Dreissena polymorpha) have exacerbated the decline of native freshwater mussels (Order Unionida) in North America since their arrival in the 1980s. Options for controlling invasive mussels, particularly in unionid mussel habitats, are limited. Previously, carbon dioxide (CO2) showed selective toxicity for zebra mussels, relative to unionids, when applied in cool water (12 °C). We first determined 96 h lethal concentrations of CO2 at 5 and 20 °C to zebra mussels and responses of juvenile plain pocketbook (Lampsilis cardium). Next, we compared the time to lethality for zebra mussels at 5, 12, and 20 °C during exposure to partial pressure of CO2 (PCO2) 110¬–120 atmospheres (atm; 1 atm = 101.325 kPa) and responses of juvenile plain pocketbook and fragile papershell (Leptodea fragilis). We found efficacious CO2 treatment regimens at each temperature that were minimally lethal to unionids. At 5 °C, plain pocketbook survived 96 h exposure to the highest PCO2 treatment (139 atm). At 20 °C, the 96 h LC10 (lethal concentration to 10% of animals) for plain pocketbook [173 atm PCO2, 95% confidence interval (CL) 147–198 atm] was higher than the LC99 for zebra mussels (118 atm PCO2, CL 109–127 atm). Lethal time to 99% mortality (LT99) of zebra mussels in 110 to 120 atm PCO2 ranged from 100 h at 20 °C to 300 h at 5 °C. Mean survival of juvenile unionids exceeded 85% in LT99 CO2 treatments at all temperatures. Short-term infusion of 100 to 200 atm PCO2 at a range of water temperatures could reduce biofouling by zebra mussels with limited adverse effects on unionid mussels.

Environmental Toxicology and Chemistry↗
USGS2020

Assessment of two techniques for remediation of lacustrine rocky reef spawning habitat

Rocky reef habitats in lacustrine systems constitute important areas for lithophilic‐spawning fishes. Interstitial spaces created by the structure of rocky reefs form microenvironments where incubating embryos and juvenile fish are potentially protected from predators and physical displacement. However, if interstitial spaces are filled or blocked by sediment or biofouling, the reef structure may lose these benefits. Common practices to restore reef habitat include augmentation of existing reef structures or construction of new reefs, though these practices can be costly. We explored an alternative approach for reef remediation. In 2018, we developed two benthic sled cleaning devices that used either propulsion or pressurized water jets and were towed behind a small vessel to clean reefs. We used the devices to clean two impaired natural rocky reefs in Saginaw Bay, Lake Huron. We indexed effectiveness of cleaning by measured changes in substrate relative hardness before and after cleaning. A biological response to reef cleaning was also measured by egg deposition of fall (Lake Whitefish Coregonus clupeaformis ) and spring (Walleye Sander vitreus ) lithophilic spawners. We found that our propulsion cleaning device was more effective in increasing substrate relative hardness than was the water jet device, although this was not consistent among all study locations. We also found that egg deposition on study plots was variable, but in general, egg deposition was highest on study plots that had the greatest increases in relative hardness post‐cleaning. The practicality of cleaning devices is likely related to the magnitude of site‐specific degradation. Our results indicate that the use of these or similar devices can potentially increase the quality of spawning habitat by displacing sediments that have deposited on reef structures.

North American Journal of Fisheries Management↗
USGS2010

Aquifer geochemistry at potential aquifer storage and recovery sites in coastal plain aquifers in the New York city area, USA

The effects of injecting oxic water from the New York city (NYC) drinking-water supply and distribution system into a nearby anoxic coastal plain aquifer for later recovery during periods of water shortage (aquifer storage and recovery, or ASR) were simulated by a 3-dimensional, reactive-solute transport model. The Cretaceous aquifer system in the NYC area of New York and New Jersey, USA contains pyrite, goethite, locally occurring siderite, lignite, and locally varying amounts of dissolved Fe and salinity. Sediment from cores drilled on Staten Island and western Long Island had high extractable concentrations of Fe, Mn, and acid volatile sulfides (AVS) plus chromium-reducible sulfides (CRS) and low concentrations of As, Pb, Cd, Cr, Cu and U. Similarly, water samples from the Lloyd aquifer (Cretaceous) in western Long Island generally contained high concentrations of Fe and Mn and low concentrations of other trace elements such as As, Pb, Cd, Cr, Cu and U, all of which were below US Environmental Protection Agency (USEPA) and NY maximum contaminant levels (MCLs). In such aquifer settings, ASR operations can be complicated by the oxidative dissolution of pyrite, low pH, and high concentrations of dissolved Fe in extracted water.The simulated injection of buffered, oxic city water into a hypothetical ASR well increased the hydraulic head at the well, displaced the ambient groundwater, and formed a spheroid of injected water with lower concentrations of Fe, Mn and major ions in water surrounding the ASR well, than in ambient water. Both the dissolved O2 concentrations and the pH of water near the well generally increased in magnitude during the simulated 5-a injection phase. The resultant oxidation of Fe2+ and attendant precipitation of goethite during injection provided a substrate for sorption of dissolved Fe during the 8-a extraction phase. The baseline scenario with a low (0.001M) concentration of pyrite in aquifer sediments, indicated that nearly 190% more water with acceptably low concentrations of dissolved Fe could be extracted than was injected. Scenarios with larger amounts of pyrite in aquifer sediments generally resulted in less goethite precipitation, increased acidity, and increased concentrations of dissolved Fe in extracted water. In these pyritic scenarios, the lower amounts of goethite precipitated and the lower pH during the extraction phase resulted in decreased sorption of Fe2+ and a decreased amount of extractable water with acceptably low concentrations of dissolved Fe (5.4??10-6M). A linear decrease in recovery efficiency with respect to dissolved Fe concentrations is caused by pyrite dissolution and the associated depletion of dissolved O2 (DO) and increase in acidity. Simulations with more than 0.0037M of pyrite, which is the maximum amount dissolved in the baseline scenario, had just over a 50% recovery efficiency. The precipitation of ferric hydroxide minerals (goethite) at the well screen, and a possible associated decrease in specific capacity of the ASR well, was not apparent during the extraction phase of ASR simulations, but the model does not incorporate the microbial effects and biofouling associated with ferric hydroxide precipitation.The host groundwater chemistry in calcite-poor Cretaceous aquifers of the NYC area consists of low alkalinity and moderate to low pH. The dissolution of goethite in scenarios with unbuffered injectate indicates that corrosion of the well could occur if the injectate is not buffered. Simulations with buffered injectate resulted in greater precipitation of goethite, and lower concentrations of dissolved Fe, in the extracted water. Dissolved Fe concentrations in extracted water were highest in simulations of aquifers (1) in which pyrite and siderite in the aquifer were in equilibrium, and (2) in coastal areas affected by saltwater intrusion, where high dissolved-cation concentrations provide a greater exchange of Fe2+ (FeX2). Results indicate that ASR in pyrite-beari

Applied Geochemistry↗
USGS2025

Potential interactions between birds and floating photovoltaic solar energy: Spatially informed species vulnerabilities, techno-ecological risks, and sustainability trade-offs

Floating photovoltaics (floating solar panels; FPV) can reduce the negative impacts of solar energy development in terrestrial environments, but their effects on freshwater ecosystems remain poorly understood. We examined potential FPV interactions with avian biodiversity, using previously modeled technical potential of FPV in the northeastern United States. We developed a vulnerability index based on avian species’: (i) morphological traits, (ii) level of conservation concern, and (iii) habitat requirements. Using eBird participatory science data, we assessed the risk of FPV to 291 species of birds occurring at FPV-suitable waterbodies based on their vulnerability index and estimated relative abundance at each location. The greatest risk of FPVs to birds was associated with waterbodies near the Atlantic coast and Great Lakes, and most (80%) of these high-risk waterbodies were smaller waterbodies. Because the avian risk at FPV-suitable waterbodies was not correlated with estimated energy generation, reducing risk to birds might not require energy trade-offs. Moreover, avoiding FPV installations at waterbodies predicted to pose high risk to birds is likely to return social and recreational benefits while minimizing risk of biofouling. Our analysis provides a framework for proactively evaluating risk, reducing potential adverse impacts of FPV to birds, and identifying cobenefits of sustainable FPV siting across waterscapes.

Connecticut, Delaware, Maine, Maryland, Massachuse↗