Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Water Investigation”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98Linked to original sources
USGS2000

Predevelopment water-level map of the Santa Fe Group aquifer system in the middle Rio Grande basin between Cochiti Lake and San Acacia, New Mexico

Because of its increasing population and limited water resources, the Middle Rio Grande Basin between Cochiti Lake and San Acacia, New Mexico, has recently become the subject of intense study. In particular, the U.S. Geological Survey (USGS) in cooperation with the City of Albuquerque has constructed a series of ground-water-flow models of the Tertiary and Quaternary basin-fill deposits of the Santa Fe Group aquifer system (Kernodle and Scott, 1986; Kernodle and others, 1987; Kernodle and others, 1995; Kernodle, 1998; Tiedeman and others, 1998). The ground-water-flow system also has been the focus of hydrochemical studies and other efforts intended largely to help develop an improved flow model. Among the information critical to a thorough understanding of the ground-water-flow system are water-level data that indicate the directions of ground-water flow and the magnitudes of hydraulic gradients in the aquifer prior to perturbation by substantial ground-water withdrawals (under predevelopment conditions).

Water-Resources Investigations Report↗
USGS2000

Guidelines and standard procedures for continuous water-quality monitors: Site selection, field operation, calibration, record computation, and reporting

The U.S. Geological Survey uses continuous water-quality monitors to assess variations in the quality of the Nation's surface water. A common system configuration for data collection is the four-parameter water-quality monitoring system, which collects temperature, specific conductance, dissolved oxygen, and pH data, although systems can be configured to measure other properties such as turbidity or chlorophyll. The sensors that are used to measure these water properties require careful field observation, cleaning, and calibration procedures, as well as thorough procedures for the computation and publication of final records. Data from sensors can be used in conjunction with collected samples and chemical analyses to estimate chemical loads. This report provides guidelines for site-selection considerations, sensor test methods, field procedures, error correction, data computation, and review and publication processes. These procedures have evolved over the past three decades, and the process continues to evolve with newer technologies.

Water-Resources Investigations Report↗
USGS2001

Historical water-quality data for the High Plains Regional Ground-Water Study Area in Colorado, Kansas, Nebraska, New Mexico, Oklahoma, South Dakota, Texas, and Wyoming, 1930-98

The High Plains aquifer underlies 174,000 square miles in parts of eight States and includes eight primary hydrogeologic units, including the well-known Ogallala Formation. The High Plains aquifer is an important resource, providing water for 27 percent of the Nation?s irrigated agricultural lands in an otherwise dry landscape. Since the 1980?s there has been concern over the sustainability of the aquifer due to water-level declines caused by substantial pumping. Water quality of the aquifer is a more recent concern. As part of the U.S. Geological Survey?s National Water-Quality Assessment Program, historical water-quality data have been gathered for the High Plains Regional Ground-Water Study Area into a retrospective data base, which can be used to evaluate the occurrence and distribution of water-quality constituents of concern.Data from the retrospective data base verify that nitrate, pesticides, and dissolved solids (salinity) are important water-quality concerns in the High Plains study area. Sixteen percent of all measured nitrate concentrations were larger than the U.S. Environmental Protection Agency drinking-water standard of 10 milligrams per liter. In about 70 percent of the counties within the High Plains study area, nitrate concentrations for 1980-98 were significantly larger than for 1930-69. While nitrate concentrations are largest where depth to water is shallow, concentrations also have increased in the Ogallala Formation where depth to water is large. Pesticide data primarily are available only in the northern half of the study area. About 50 pesticides were detected in the High Plains study area, but only four pesticides (atrazine, alachlor, cyanazine, and simazine) had concentrations exceeding a drinking-water standard. The occasional detection of pesticides in deeper parts of the Ogallala Formation indicates that contamination pathways exist. Dissolved solids, which are a direct measure of salinity, had 29 percent of measured concentrations in excess of the secondary drinking-water standard of 500 milligrams per liter. Comparison of dissolved-solids concentrations prior to 1980 to concentrations after 1980 indicates dissolved-solids concentrations have increased in the alluvial valleys of the Platte, the Republican, and the Arkansas Rivers, as well as in the Ogallala Formation?South hydrogeologic unit.Water-quality results indicate that human activities are affecting the water of the High Plains aquifer. Because there is a potential for water quality to become impaired relative to the historical uses of the aquifer, water quality needs to be considered when evaluating the sustainability of the High Plains aquifer. Data collected as part of the High Plains Regional Ground-Water Study will help to fill in gaps in water-quality information and provide additional information for understanding the factors that govern ambient water quality.

Colorado, Kansas, Nebraska, New Mexico, Oklahoma, ↗
USGS2001

Comparison of U.S. Geological Survey and Ohio Environmental Protection Agency fish-collection methods using the index of biotic integrity and modified index of well-being, 1996–97

The U.S. Geological Survey (USGS) and Ohio Environmental Protection Agency (OEPA) collected data on fish from 10 stream sites in 1996 and 3 stream sites in 1997 as part of a comparative study of fish community assessment methods. The sites sampled represent a wide range of basin sizes (ranging from 132–6,330 square kilometers) and surrounding land-use types (urban, agricultural, and mixed). Each agency used its own fish-sampling protocol. Using the Index of Biotic Integrity and Modified Index of Well-Being, differences between data sets were tested for significance by means of the Wilcoxon signed-ranks test ( α = 0.05). Results showed that the median of Index of Biotic Integrity differences between data sets was not significantly different from zero ( p = 0.2521); however, the same statistical test showed the median differences in the Modified Index of Well-Being scores to be significantly different from zero ( p = 0.0158). The differences observed in the Index of Biotic Integrity scores are likely due to natural variability, increased variability at sites with degraded water quality, differences in sampling methods, and low-end adjustments in the Index of Biotic Integrity calculation when fewer than 50 fish were collected. The Modified Index ofWell-Being scores calculated by OEPA were significantly higher than those calculated by the USGS. This finding was attributed to the comparatively large numbers and biomass of fish collected by the OEPA. By combining the two indices and viewing them in terms of the percentage attainment of Ohio Warmwater Habitat criteria, the two agencies’ data seemed comparable, although the Index of Biotic Integrity scores were more similar than the Modified Index of Well-Being scores.

Michigan, New York, Ohio, Pennsylvania↗
USGS2001

Benthic invertebrate assemblages and their relation to physical and chemical characteristics of streams in the Eastern Iowa Basins, 1996-98

Over 250 benthic invertebrate taxa were identified from snags and woody debris in streams and rivers of the Wapsipinicon, Cedar, Iowa, and Skunk River Basins in the Eastern Iowa Basins (EIWA) study unit of the U.S. Geological Survey National Water-Quality Assessment Program. The composition, distribution, and abundance of 74 predominant taxa were related to environmental conditions in the study unit, using habitat, hydrologic, and water-quality data. Four groups of sites were defined, based on the distribution and relative abundance of taxa. Detrended correspondence analysis was used to identify relations in the structure of the invertebrate assemblages, and the correspondence of taxa and sites in the groups was related to habitat, hydrologic, and water-quality information. Responses of invertebrate assemblages were explained by natural factors, such as surficial geology or physical habitat conditions, as well as human influences, such as agriculture or high-density hog-feeding operations. Mayflies, caddisflies, and true flies were well represented in streams and rivers of the EIWA study unit. The mayflies Tricorythodes and Baetis intercalaris , the net-spinning caddisflies Hydropsyche bidens and H. simulans, and the Chironomidae Glyptotendipes , Polypedilum , and Rheotanytarsus predominated. Spatial variation in benthic invertebrate assemblages within a site was less than that observed among sites. Assemblages from 3 years of sampling generally were grouped by site, with exceptions related to differences in discharge among years. The benthic invertebrate assemblages associated with the four groups of sites reflected the cumulative effects of agricultural and urban land use, sources of nutrient and organic enrichment, and longitudinal stream succession—the natural sequence of communities in streams from headwaters to large rivers. These factors, especially the natural changes from upstream to downstream, were influential in characterizing the benthic invertebrate assemblages of the site groups. Stream size, a reflection of basin area, was a principal influence in categorizing the benthic invertebrate assemblages, with sites that have the largest basin areas forming a separate group. Although it is difficult to distinguish among the contributions of large basin area, increased concentrations of nutrients and pesticides, and decreasing instream habitat diversity, the resulting invertebrate assemblage described was distinct. The remaining sites were headwater or tributary streams that reflected conditions more common to smaller streams, such as higher gradients and the potential for more diverse or extensive riparian habitat, but were distinguished by landform. Following basin area in importance, landform contributed to the differences observed among the benthic invertebrate communities at the remaining sites.

Iowa, Minnesota↗
USGS2000

Stream discharge measurements under ice cover

This training presentation shows procedures used by the U.S. Geological Survey to measure streamflow when streams are covered by ice. Although 'Ice Measurements' are generally more difficult to make than open-water measurements and are often made under uncomfortable conditions it is very important that ice measurements be made regularly during the winter. This is because a large part of many winter discharge records depend on such measurements.

Water-Resources Investigations Report↗
USGS2000

One-dimensional simulation of stratification and dissolved oxygen in McCook Reservoir, Illinois

As part of the Chicagoland Underflow Plan/Tunnel and Reservoir Plan, the U.S. Army Corps of Engineers, Chicago District, plans to build McCook Reservoir.a flood-control reservoir to store combined stormwater and raw sewage (combined sewage). To prevent the combined sewage in the reservoir from becoming anoxic and producing hydrogen sulfide gas, a coarse-bubble aeration system will be designed and installed on the basis of results from CUP 0-D, a zero-dimensional model, and MAC3D, a three-dimensional model. Two inherent assumptions in the application of MAC3D are that density stratification in the simulated water body is minimal or not present and that surface heat transfers are unimportant and, therefore, may be neglected. To test these assumptions, the previously tested, one-dimensional Dynamic Lake Model (DLM) was used to simulate changes in temperature and dissolved oxygen in the reservoir after a 1-in-100-year event. Results from model simulations indicate that the assumptions made in MAC3D application are valid as long as the aeration system, with an air-flow rate of 1.2 cubic meters per second or more, is operated while the combined sewage is stored in the reservoir. Results also indicate that the high biochemical oxygen demand of the combined sewage will quickly consume the dissolved oxygen stored in the reservoir and the dissolved oxygen transferred through the surface of the reservoir; therefore, oxygen must be supplied by either the rising bubbles of the aeration system (a process not incorporated in DLM) or some other technique to prevent anoxia.

Illlinois↗
USGS2001

Ground-water quality in Quaternary deposits of the central High Plains aquifer, south-central Kansas, 1999

Water samples from 20 randomly selected domestic water-supply wells completed in the Quaternary deposits of south-central Kansas were collected as part of the High Plains Regional Ground-Water Study conducted by the U.S. Geological Survey's National Water-Quality Assessment Program. The samples were analyzed for about 170 water-quality constituents that included physical properties, dissolved solids and major ions, nutrients and dissolved organic carbon, trace elements, pesticides, volatile organic compounds, and radon. The purpose of this study was to provide a broad overview of ground-water quality in a major geologic subunit of the High Plains aquifer. Water from five wells (25 percent) exceeded the 500-milligrams-per-liter of dissolved solids Secondary Maximum Contaminant Level for drinking water. The Secondary Maximum Contaminant Levels of 250 milligrams per liter for chloride and sulfate were exceeded in water from one well each. The source of these dissolved solids was probably natural processes. Concentrations of most nutrients in water from the sampled wells were small, with the exception of nitrate. Water from 15 percent of the sampled wells had concentrations of nitrate greater than the 10-milligram-per-liter Maximum Contaminant Level for drinking water. Water from 80 percent of the sampled wells showed nitrate enrichment (concentrations greater than 2.0 milligrams per liter), which is more than what might be expected for natural background concentrations. This enrichment may be the result of synthetic fertilizer applications, the addition of soil amendment (manure) on cropland, or livestock production. Most trace elements in water from the sampled wells were detected only in small concentrations, and few exceeded respective water-quality standards. Only arsenic was detected in one well sample at a concentration (240 micrograms per liter) that exceeded its proposed Maximum Contaminant Level (5.0 micrograms per liter). Additionally, one concentration of iron and two concentrations of manganese were larger than the Secondary Maximum Contaminant Levels of 300 and 50 micrograms per liter, respectively. Some occurrences of trace elements may have originated from human-related sources; however, the generally small concentrations that were measured probably reflect mostly natural sources for these constituents. A total of 47 pesticide compounds from several classes of herbicides and insecticides that included triazine, organophosphorus, organochlorine, and carbamate compounds and three pesticide degradation products were analyzed in ground-water samples during this study. Water from 50 percent of the wells sampled had detectable concentrations of one or more of these 47 compounds. The herbicide atrazine and its degradation product deethylatrazine were detected most frequently (in water from eight and nine wells, respectively); other pesticides detected were the insecticides carbofuran (in water from one well) and diazinon (in water from one well), and the herbicide metolachlor (in water from two wells). However, all concentrations of these compounds were small and substantially less than established Maximum Contaminant Levels. The use of pesticides in crop production probably is largely responsible for the occurrence of pesticides in the ground-water samples collected during this study. Although concentrations of detected pesticides were small (relative to established Maximum Contaminant Levels), the synergistic effect of these concentrations and long-term exposure to multiple pesticides on human health are unknown. Water samples from the Quaternary deposits were analyzed for 85 volatile organic compounds. Water from two wells (10 percent) had a detectable concentration of a volatile organic compound. Chloroform was detected at concen-trations of 0.18 and 0.25 microgram per liter, substantially less than the 100-microgram-per-liter Maximum Contaminant Level for total trihalomethanes. In general, the occurrence and detectio

Kansas↗
USGS2001

Quantification of metal loads by tracer injection and synoptic sampling in Daisy Creek and the Stillwater River, Park County, Montana, August 1999

A metal-loading study using tracer-injection and synoptic-sampling methods was conducted in Daisy Creek and a short reach of the Stillwater River during baseflow in August 1999 to quantify the metal inputs from acid rock drainage in the New World Mining District near Yellowstone National Park and to examine the downstream transport of these metals into the Stillwater River. Loads were calculated for many mainstem and inflow sites by combining streamflow determined using the tracer-injection method with concentrations of major ions and metals that were determined in synoptic water-quality samples. Water quality and aquatic habitat in Daisy Creek have been affected adversely by drainage derived from waste rock and adit discharge at the McLaren Mine as well as from natural weathering of pyrite-rich mineralized rock that comprises and surrounds the ore zones. However, the specific sources and transport pathways are not well understood. Knowledge of the main sources and transport pathways of metals and acid can aid resource managers in planning and conducting effective and cost-efficient remediation activities. The metals cadmium, copper, lead, and zinc occur at concentrations that are sufficiently elevated to be potentially lethal to aquatic life in Daisy Creek and to pose a toxicity risk in part of the Stillwater River. Copper is of most concern in Daisy Creek because it occurs at higher concentrations than the other metals. Acidic surface inflows had dissolved concentrations as high as 20.6 micrograms per liter (μg/L) cadmium, 26,900 μg/L copper, 76.4 μ g/L lead, and 3,000 μ g/L zinc. These inflows resulted in maximum dissolved concentrations in Daisy Creek of 5.8 μ g/L cadmium, 5,790 μ g/L copper, 3.8 μ g/L lead, and 848 μ g/L zinc. Significant copper loading to Daisy Creek occurred only in the upper half of the stream. Sources included subsurface inflow and right-bank (mined side) surface inflows. Copper loads in left-bank (unmined side) surface inflows were negligible. Most (71 percent) of the total copper loading in the study reach occurred along a 341-foot reach near the stream’s headwaters. About 53 percent of the total copper load was contributed by five surface inflows that drain a manganese bog and the southern part of the McLaren Mine. Copper loading from subsurface inflow was substantial, contributing 46 percent of the total dissolved copper load to Daisy Creek. More than half of this subsurface copper loading occurred downstream from the reaches that received significant surface loading. Flow through the shallow subsurface appears to be the main copper-transport pathway from the McLaren Mine and surrounding altered and mineralized bedrock to Daisy Creek during base-flow conditions. Little is known about the source of acid and copper in this subsurface flow. However, possible sources include the mineralized rocks of Fisher Mountain upgradient of the McLaren Mine area, the surficial waste rock at the mine, and the underlying pyritic bedrock.

Montana↗
USGS2001

Summary of water-quality data, October 1987 through September 1997, for Fountain and Monument Creeks, El Paso and Pueblo Counties, Colorado

Fountain and Monument Creeks, which drain parts of El Paso and Pueblo Counties in Colorado, have been sampled systematically by the U.S. Geological Survey for many years to obtain records of water-quality properties and constituents; the data are stored in the National Water Inventory System. Statistical summaries of these data indicate that they have spatial and temporal trends. Comparison of water-quality data to in-stream regulatory standards, some of which were calculated in this report, indicate that some exceedances are widespread in the system and that some occur locally. Nonparametric tests to quantitatively detect monotonic trends in water-quality data indicate that many water-quality properties and constituents do not have significant monotonic trends; detected trends were mostly downward.

Water-Resources Investigations Report↗
USGS2000

Aquifer test to determine hydraulic properties of the Elm aquifer near Aberdeen, South Dakota

The Elm aquifer, which consists of sandy and gravelly glacial-outwash deposits, is present in several counties in northeastern South Dakota. An aquifer test was conducted northeast of Aberdeen during the fall of 1999 to determine the hydraulic properties of the Elm aquifer in that area. An improved understanding of the properties of the aquifer will be useful in the possible development of the aquifer as a water resource. Historical water-level data indicate that the saturated thickness of the Elm aquifer can change considerably over time. From September 1977 through November 1985, water levels at three wells completed in the Elm aquifer near the aquifer test site varied by 5.1 ft, 9.50 ft, and 11.1 ft. From June 1982 through October 1999, water levels at five wells completed in the Elm aquifer near the aquifer test site varied by 8.7 ft, 11.4 ft, 13.2 ft, 13.8 ft, and 19.7 ft. The water levels during the fall of 1999 were among the highest on record, so the aquifer test was affected by portions of the aquifer being saturated that might not be saturated during drier times. The aquifer test was conducted using five existing wells that had been installed prior to this study. Well A, the pumped well, has an operating irrigation pump and is centrally located among the wells. Wells B, C, D, and E are about 70 ft, 1,390 ft, 2,200 ft, and 3,100 ft, respectively, in different directions from Well A. Using vented pressure transducers and programmable data loggers, water-level data were collected at the five wells prior to, during, and after the pumping, which started on November 19, 1999, and continued a little over 72 hours. Based on available drilling logs, the Elm aquifer near the test area was assumed to be unconfined. The Neuman (1974) method theoretical response curves that most closely match the observed water-level changes at Wells A and B were calculated using software (AQTESOLV for Windows Version 2.13-Professional) developed by Glenn M. Duffield of HydroSOLVE, Inc. These best fit theoretical response curves are based on a transmissivity of 24,000 ft 2 /d or a hydraulic conductivity of about 600 ft/d, a storage coefficient of 0.05, a specific yield of 0.42, and vertical hydraulic conductivity equal to horizontal hydraulic conductivity. The theoretical type curves match the observed data fairly closely at Wells A and B until about 2,500 minutes and 1,000 minutes, respectively, after pumping began. The increasing rate of drawdown after these breaks is an indication that a no-flow boundary (an area with much lower hydraulic conductivity) likely was encountered and that Wells A and B may be completed in a part of the Elm aquifer with limited hydraulic connection to the rest of the aquifer. Additional analysis indicates that if different assumptions regarding the screened interval for Well B and aquifer anisotropy are used, type curves can be calculated that fit the observed data using a lower specific yield that is within the commonly accepted range. When the screened interval for Well B was reduced to 5 ft near the top of the aquifer and horizontal hydraulic conductivity was set to 20 times vertical hydraulic conductivity, the type curves calculated using a specific yield of 0.1 and a transmissivity of 30,200 ft 2 /d also matched the observed data from Wells A and B fairly well. A version of the Theim equilibrium equation was used to calculate the theoretical drawdown in an idealized unconfined aquifer when a perfectly efficient well is being pumped at a constant rate. These calculations were performed for a range of pumping rates, drawdowns at the wells, and distances between wells that might be found in a production well field in the Elm aquifer. Although the aquifer test indicates that hydraulic conductivity near the well may be adequate to support a production well, the comparison of drawdown and recovery curves indicates the possibility that heterogeneities may limit the productive capacity of specific locations in the Elm aquifer during certain times. Additional test hole drilling and geophysical studies could help characterize these heterogeneities in the aquifer.

South Dakota↗
USGS2001

Water, ice, meteorological, and speed measurements at South Cascade Glacier, Washington, 1999 balance year

Winter snow accumulation and summer snow, firn, and ice melt were measured at South Cascade Glacier, Washington, to determine the winter and net balances for the 1999 balance year. The 1999 winter snow balance, averaged over the glacier, was 3.59 meters, and the net balance was 1.02 meters. Since the winter balance record began in 1959, only three winters have had a higher winter balance. Since the net balance record began in 1953, only 2 years have had a greater positive net balance than 1999. Runoff was measured from the glacier and an adjacent non-glacierized basin. Air temperature, precipitation, and humidity were measured nearby, and ice speed was measured. This report makes these data available to the glaciological and climatological community.

Washington↗
USGS2001

Surface-water and ground-water quality in the Yucaipa area, San Bernardino and Riverside Counties, California, 1996-98

The quality of surface water and ground water in the Yucaipa area was evaluated to determine general chemical characteristics and to identify areas of recent ground-water recharge. Water samples, collected from 8 sites on 3 creeks and from 25 wells, were analyzed for general chemistry, nutrients, tritium, and stable isotopes of hydrogen and oxygen. At one production well (1S/2W-25R4), water samples were collected at discrete depths during pumping and a continuous profile of the vertical flow rate inside the well casing was recorded. In addition to general-chemistry samples, tritium and carbon-14 samples were collected at this well to interpret the age of water at different depths.Results indicate that most water in the Yucaipa area is a calcium-bicarbonate type. The general chemical composition of surface water resembles that of ground water, although the concentration of most constituents is higher in ground water. The chemical composition of most ground-water samples is similar. Elevated concentrations of nitrate in some ground-water samples may indicate recharge from agricultural areas.In surface water that recharges ground water tritium activity ranged from 7 to 18 picocuries per liter. The range of tritium activity found in ground water indicates different times since recharge and possible mixing along ground-water flow paths. The oldest ground-water sample had a tritium activity less than 0.3 picocuries per liter, indicating more than 50 years since recharge. Water samples that had tritium activity greater than 0.3 picocuries per liter indicate that some of the water was recharged since 1952. The youngest ground water (greater than 7 picocuries per liter) was found near the hills and mountains surrounding the Yucaipa area; the oldest ground water (less than 0.3 picocuries per liter) was found in the Western Heights subbasin. Testing of the vertical contribution of ground water to well 1S/2W-25R4 showed that more than one-half of the water flowed into the well between depths of about 450 and 600 feet below land surface; the rest of the water flowed into the well between 600 and about 850 feet below land surface. At a discharge rate of 750 gallons per minute, virtually no water was contributed to the well below a depth of about 850 feet. The water samples collected at this well ranged in age from less than 50 to less than 400 years before present.

Water-Resources Investigations Report↗
USGS2001

Analysis of water levels in the Frenchman Flat area, Nevada Test Site

Analysis of water levels in 21 wells in the Frenchman Flat area, Nevada Test Site, provides information on the accuracy of hydraulic-head calculations, temporal water-level trends, and potential causes of water-level fluctuations. Accurate hydraulic heads are particularly important in Frenchman Flat where the hydraulic gradients are relatively flat (less than 1 foot per mile) in the alluvial aquifer. Temporal water-level trends with magnitudes near or exceeding the regional hydraulic gradient may have a substantial effect on ground-water flow directions. Water-level measurements can be adjusted for the effects of barometric pressure, formation water density (from water-temperature measurements), borehole deviation, and land-surface altitude in selected wells in the Frenchman Flat area. Water levels in one well were adjusted for the effect of density; this adjustment was significantly greater (about 17 feet) than the adjustment of water levels for barometric pressure, borehole deviation, or land-surface altitude (less than about 4 feet). Water-level measurements from five wells exhibited trends that were statistically and hydrologically significant. Statistically significant water-level trends were observed for three wells completed in the alluvial aquifer (WW-5a, UE-5n, and PW-3), for one well completed in the carbonate aquifer (SM-23), and for one well completed in the quartzite confining unit (Army-6a). Potential causes of water-level fluctuations in wells in the Frenchman Flat area include changes in atmospheric conditions (precipitation and barometric pressure), Earth tides, seismic activity, past underground nuclear testing, and nearby pumping. Periodic water-level measurements in some wells completed in the carbonate aquifer indicate cyclic-type water-level fluctuations that generally correlate with longer term changes (more than 5 years) in precipitation. Ground-water pumping fromthe alluvial aquifer at well WW-5c and pumping and discharge from well RNM-2s appear to cause water-level fluctuations in nearby observation wells. The remaining known sources of water-level fluctuations do not appear to substantially affect water-level changes (seismic activity and underground nuclear testing) or do not affect changes over a period of more than 1 year (barometric pressure and Earth tides) in wells in the Frenchman Flat area.

Water-Resources Investigations Report↗
USGS2001

Occurrence of selected radionuclides in ground water used for drinking water in the United States: A reconnaissance survey, 1998

The U.S. Geological Survey, in collaboration with the U.S. Environmental Protection Agency, the American Water Works Association, and the American Water Works Service Company, completed a targeted national reconnaissance survey of selected radionuclides in public ground-water supplies. Radionuclides analyzed included radium-224 (Ra-224), radium-226 (Ra-226), radium-228 (Ra-228), polonium-210 (Po-210) and lead-210 (Pb-210).This U.S. Geological Survey reconnaissance survey focused intentionally on areas with known or suspected elevated concentrations of radium in ground water to determine if Ra-224 was also present in the areas where other isotopes of radium had previously been detected and to determine the co-occurrence characteristics of the three radium isotopes (Ra-224, Ra-226, and Ra-228) in those areas. Ninety-nine raw-water samples (before water treatment) were collected once over a 6-month period in 1998 and 1999 from wells (94 of which are used for public drinking water) in 27 States and 8 physiographic provinces. Twenty-one of the 99 samples exceeded the current U.S. Environmental Protection Agency drinking-water maximum contaminant level of 5 picocuries per liter (pCi/L) for combined radium (Ra-226 + Ra-228). Concentrations of Ra-224 were reported to exceed 1 pCi/L in 30 percent of the samples collected, with a maximum concentration of 73.6 pCi/L measured in water from a nontransient, noncommunity, public-supply well in Maryland. Radium-224 concentrations generally were higher than those of the other isotopes of radium. About 5 percent of the samples contained concentrations of Ra-224 greater than 10 pCi/L, whereas only 2 percent exceeded 10 pCi/L for either Ra-226 or Ra-228. Concentrations of Ra-226 greater than 1 pCi/L were reported in 33 percent of the samples, with a maximum concentration of 16.9 pCi/L measured in water from a public-supply well in Iowa. Concentrations of Ra-228 greater than 1 pCi/L were reported in 22 samples, with a maximum concentration of 72.3 pCi/L measured in water from a non-transient, noncommunity, public-supply well in Maryland.Radium-224, which is a decay product of Ra-228 in the Th-232 decay series, was significantly correlated with Ra-228 (Spearman?s rank correlation coefficient ?r? equals 0.82) and to a lesser degree with Ra-226 (r equals 0.69), which is an isotope in the U-238 decay series. The rank correlation coefficient between Ra-226 and Ra-228 was 0.63. The high correlation between Ra-224 and Ra-228 concentrations and the corresponding isotopic ratios of the two (about 1:1 in 90 percent of the samples) indicates that the two radionuclides occur in approximately equal concentrations in most ground water sampled. Thus, Ra-228 can be considered as a reasonable proxy indicator for the occurrence of Ra-224 in ground water.The maximum concentration of Po-210 was 4.85 pCi/L and exceeded 1 pCi/L in only two samples. The maximum concentration of Pb-210 was 4.14 pCi/L, and about 10 percent of the samples exceeded 1 pCi/L. Areas with known, or suspected, elevated concentrations of polonium and lead were not targeted in this survey.Three major implications are drawn for future radionuclide monitoring on the basis of this information: (1) grossalpha particle analyses of ground water should be done within about 48-72 hours after collection to determine the presence of the short-lived, alpha-particle emitting isotopes, such as Ra-224, which was detected in elevated concentrations in many of the samples collected for this survey; (2) the isotope ratios of Ra-224 to Ra-228 in ground water are variable on a national scale, but the two radioisotopes generally occur in ratios near 1:1, therefore, the more commonly measured Ra-228 can be used as an indicator of Ra-224 occurrence for some general purposes other than compliance; and (3) the isotopic ratios of Ra-226 to Ra-228 were less than 3:2 in many samples. These ratios corroborate results of previous studies that have shown the presence of Ra-228.

Water-Resources Investigations Report↗
USGS2001

Simulated ground-water flow and water quality of the Mississippi River alluvium near Burlington, Iowa, 1999

The City of Burlington, Iowa, obtains some of its public water supply by withdrawing ground water from the Mississippi River alluvium, an alluvial aquifer adjacent to the Mississippi River. The U.S. Geological Survey, in cooperation with the City of Burlington, conducted a hydrologic study of the Mississippi River alluvium near Burlington in 1999 to improve understanding of the flow system, evaluate the effects of hypothetical pumping scenarios on the flow system, and evaluate selected water-quality constituents in parts of the alluvium. A steady-state, ground-water flow model was constructed for a 7-square-mile area of the alluvium using October 1999 hydrologic conditions to help conceptualize the flow system, identify sources of water to the alluvium, and assess potential effects from additional hypothetical ground-water withdrawals from the lower alluvium. The model was discretized into a 70-row by 68-column grid using cells measuring 200 feet by 200 feet. Three model layers were used to represent flow in the upper part of the alluvium, lower part of the alluvium, and bedrock. The primary sources of ground water to the alluvium were subsurface flow from areas of the alluvium adjacent to the modeled area, recharge from precipitation, subsurface flow from Flint River streamchannel deposits adjacent to the alluvium, and river leakage. The primary components of outflow from the flow system were river leakage, municipal ground-water withdrawals (pumpage), and leakage to drainage ditches. Three hypothetical pumping scenarios were used to assess the potential effects of increased ground-water withdrawals from the lower part of the alluvium: (1) pumping a second existing municipal well at a rate of 0.5 million gallons per day, (2) pumping a hypothetical well completed in an area between the city water-treatment facility and Flint River at a rate of 1.0 million gallons per day, and (3) pumping a hypothetical well completed in an area south of the Flint River at a rate of 1.0 million gallons per day. Maximum additional simulated drawdown in the upper alluvium ranged from less than 3 feet (for scenario 1) to about 9 feet (for scenario 3). Maximum additional simulated drawdown in the lower alluvium ranged from about 12 feet (for scenario 1) to about 34 feet (for scenario 3). Water budgets for each scenario indicated future additional withdrawals from the flow system near Burlington’s existing municipal wells would significantly increase the amount of river leakage into the flow system. Water samples collected from the alluvium indicated ground water can be classified as a calcium-magnesium-bicarbonate type. Reducing conditions likely occur in some localized areas of the alluvium, as suggested by relatively large concentrations of dissolved iron (4,390 micrograms per liter) and manganese (2, 430 micrograms per liter) in some ground-water samples. Nitrite plus nitrate was detected at concentrations greater than or equal to 8 milligrams per liter in three samples collected from observation wells completed in close proximity to cropland; the nitrite plus nitrate concentration in one groundwater sample exceeded the U.S. Environmental Protection Agency Maximum Contaminant Level for nitrate in drinking water (10 milligrams per liter as N). Triazine herbicides (atrazine, cyanazine, propazine, simazine, and selected degradation products) and chloroacetanilide herbicides (acetochlor, alachlor, and metolachlor) were detected in some water samples. A greater number of herbicide compounds were detected in surface-water samples than in ground-water samples. Herbicide concentrations typically were at least an order of magnitude greater in surfacewater samples than in ground-water samples. The Maximum Contaminant Level for alachlor (2 micrograms per liter) was exceeded in a sample from Dry Branch Creek at Tama Road and for atrazine (3 micrograms per liter) was exceeded in samples collected from Dry Branch Creek at Tama Road and the county drainage ditch at Tama Road.

Iowa↗