Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Mining Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98Linked to original sources
USGS2018

Sediment transport monitoring of the Yankee Fork of the Salmon River near Stanley, Idaho, 2012–15

The Yankee Fork of the Salmon River is one of the larger watersheds in the upper Salmon River subbasin of central Idaho. Mining activities since the late 19th century, specifically placer mining and associated dredging from 1940 to 1953, have left the fluvial system in a highly altered and unnatural state. To improve aquatic and terrestrial habitat in the Yankee Fork, the Bureau of Reclamation and other stakeholders collaborated on the Dredge Tailings Restoration Project and Yankee Fork Rehabilitation Project. In conjunction with these rehabilitation efforts, the U.S. Geological Survey monitored suspended-sediment transport and discharge between 2012 and 2015 at three sites in the lower reaches of the Yankee Fork. Pseudo-hydrographs were developed for the Bonanza and Confluence sites using data from the streamgage site as a surrogate. Results showed a good fit between measured and calculated discharge with R2 values of 0.96 for the Bonanza site and 0.98 for the Confluence site. Both regressions have high hypothesis test statistics (t>23) and low probability values (p<0.0001), indicating a strong linear correlation. Suspended-sediment samples collected mostly during snowmelt runoff showed a positive correlation with stream discharge. Hysteresis in the sample results indicates a supply-limited suspended-sediment transport regime. Percent sand by weight of suspended-sediment samples identified a possible discharge threshold for sand suspension at about 400 cubic feet per second (ft 3 /s) at the Bonanza site and about 1,000 ft 3 /s at the Confluence and Gage sites.

Idaho↗
USGS2019

Economic analysis for U.S. Geological Survey Coal Basin Assessments

This report presents economic principles and applications as they pertain to the U.S. Geological Survey’s U.S. Coal Resources and Reserves Assessment Project. This report compares commercial and governmental applications of economic principles and evaluation techniques. Common practices are described for evaluating the commercial investment potential of coal properties and calculating the government reserve potential of major U.S. coal basins. This report discusses economic principles that are applicable to typical mining feasibility studies as well as those categories and cost items that are often misused.

Open-File Report↗
USGS2021

GIS-based identification of areas that have resource potential for sediment-hosted Pb-Zn deposits in Alaska

A state-wide Geographic Information System analysis was conducted to assess prospectivity for lead (Pb) and zinc (Zn) in sediment-hosted deposits in Alaska. The datasets that were utilized include publicly available geospatial datasets of lithologic, geochemical, and mineral occurrence data. Key characteristics of Pb-Zn deposits were identified in available datasets and scored with respect to relative importance. To evaluate resource potential, drainage basins of the smallest size were chosen, each of which covers approximately 100 square kilometers (km 2 ). Drainage basins are the most logical and efficient unit for evaluation because the most regionally robust dataset comes from stream sediment geochemistry. Sediment-hosted Pb-Zn deposits in Alaska include those contained in carbonate rocks (similar to Mississippi Valley Type or MVT deposits) and those contained in clastic-dominated (CD) sequences (CD Pb-Zn), historically referred to as SEDEX (sedimentary exhalative). The latter include the deposits currently being mined in the Red Dog district in the western Brooks Range. Host rocks for the two subtypes are distinct: carbonate versus fine-grained clastic rocks for CD Pb-Zn deposits. However, there are exceptions: some CD Pb-Zn deposits are hosted in carbonate layers within a thick clastic-dominated rock sequence. The statewide geologic map database contains units that commonly include mixed carbonate-clastic sequences that cannot be subdivided. The most significant difference between the two deposit types is their respective depositional environments and tectonic settings, but at the reconnaissance level of mapping in most areas of the state, these distinctions are not possible. Furthermore, nearly all critical geochemical parameters (silver [Ag], barium [Ba], Pb, Zn) are common to both types, and therefore it was not possible to do separate assessments for carbonate-hosted and CD Pb-Zn deposits. Areas identified that have moderate to high potential for sediment-hosted Pb-Zn deposits include the (1) western and central Brooks Range, referred to in this report as the Brooks Range zinc belt; (2) Seward Peninsula (and adjacent St. Lawrence Island); (3) Farewell terrane in Interior Alaska; (4) two spatially distinct belts in east-central Alaska; and (5) the central Alaska Range. All areas contain some known deposits, and that provides credibility to the scoring process. Some hydrologic unit codes (HUCs) that have high potential for sediment-hosted Pb-Zn deposits are located adjacent to areas of known deposits and indicate the potential for expansion of known Pb-Zn districts. There are a few areas that have high potential but contain no known sediment hosted Pb-Zn occurrences, prospects, or deposits. In such areas, future investigations could be focused on better defining and constraining prospectivity with additional data.

Alaska↗
USGS1991

Reconnaissance geochemical survey of the Farah Garan-Kutam mineral belt, Kingdom of Saudi Arabia

Wadi-sediment samples were collected from 450 sites in a 580-km 2 area (sample density 1.5 per km 2 ) as part of an exploration program designed to assess the mineral potential of the Farah Garan - Kutam mineral belt and to evaluate mineralization at the Farah Garan ancient working (DGMR Project 3.03.10). Demagnetized panned-concentrate and sieved minus-80-mesh fractions were prepared from each bulk sample of approximately 5 kg. The fractions were analyzed for silver, arsenic, copper, lead, and zinc by atomic-absorption methods and for gold by an atomic-absorption graphite-furnace method. The analytical results for the panned-concentrate samples delineate 21 anomalies, and the results for the minus-80-mesh samples delineate 24. Of the latter, 14 are coincident with panned-concentrate anomaly areas, whereas 10 are uniquely defined. The analytical results of the panned-concentrate samples uniquely define two areas. Overall, the panned-concentrate samples yielded threshold values higher than the threshold values for the minus-80-mesh samples (for gold, 10 times higher), and delineate anomalous areas larger than those for the minus-80-mesh samples. This observation is consistent with the results of similar surveys elsewhere in the Arabian Shield, which indicate that panned-concentrate samples more effectively outline geochemical anomalies than sieved fine-grained samples. In the present survey, geochemical anomalies locate all the sites of mineralization known from previous work. The survey is therefore technically a success. However, a large number of these anomalies probably result from contamination of the wadi systems by metal dispersed from ancient mine workings, and this particular survey, overall, may be of limited value as a guide to the discovery of hitherto unknown mineralization. Nevertheless, the survey outlines two areas that may mark extensions to known mineralization, and a number of other areas in which no mineralization is known. Based on a consideration of the character of the bedrock geology, the value of each reported analytical result in relation to the respective element thresholds, and the number of anomalous samples that cluster in any given area, four areas are recommended for high-priority follow-up sampling.

Open-File Report↗
USGS2012

Hydrologic, water-quality, and biological characteristics of the North Fork Flathead River, Montana, water years 2007-2008

In water year 2007, the U.S. Geological Survey, in cooperation with the National Park Service, began a 2-year study to collect hydrologic, water-quality, and biological data to provide a baseline characterization of the North Fork Flathead River from the United States-Canada border to its confluence with the Middle Fork of the Flathead River near Columbia Falls, Montana. Although mining in the Canadian portion of the North Fork Basin was banned in 2010 by a Memorandum of Understanding issued by the Province of British Columbia, baseline characterization was deemed important for the evaluation of any potential future changes in hydrology, water quality, or aquatic biology in the basin. The North Fork Basin above Columbia Falls (including Canada) drains an area of 1,564 square miles, and the study area encompasses the portion of the basin in Montana, which is 1,126 square miles. Seasonal patterns in the hydrology of the North Fork are dominated by the accumulation and melting of seasonal snowpack in the basin. Low-flow conditions occurred during the late-summer, fall, and winter months, and high-flow conditions coincided with the spring snowmelt. Substantial gains in streamflow occurred along the study reach of the North Fork, 85 percent of which were accounted for by tributary inflows during low-flow conditions, indicating unmeasured streamflow inputs along the main stem were 15 percent or less.

Montana↗
USGS1997

U.S. Geological Survey Subsidence Interest Group Conference; proceedings of the Technical Meeting, Las Vegas, Nevada, February 14-16, 1995

Introduction to Papers: This report is a compilation of short papers that are based on oral presentations summarizing the results of recent research that were given at the third meeting of the Subsidence Interest Group held in Las Vegas, Nevada, February 14-16, 1995. The report includes case studies of land subsidence and aquifer-system deformation resulting from fluid withdrawal, geothermal development, and mine collapse. Methods for monitoring land subsidence using Global Positioning System technology for the rapid and accurate measurement of changes in land-surface altitude also are described. The current status of numerical simulation of land subsidence in the USGS is summarized, and several of the short papers deal with the development and application of new numerical techniques for simulation and quantification of aquifer system deformation. Not all oral presentations made at the meeting are documented in this report. Several of the presentations were of ongoing research and as such, the findings were provisional in nature and were offered at the meeting to stimulate scientific discussion and debate among colleagues. The information presented in this report, although only a subset of the proceedings of the meeting in Las Vegas, should help expand the scientific basis for management decisions to mitigate or control the effects of land subsidence. The short papers describing the results of these studies provide a cross section of ongoing research in aquifer mechanics and land subsidence and also form an assessment of the current technology and 'state of the science.' The analytical and interpretive methods described in this report will be useful to scientists involved in studies of ground-water hydraulics and aquifer-system deformation.

Open-File Report↗
USGS1964

Geology and mineral deposits of the Osgood Mountains quadrangle, Humboldt County, Nevada

The Osgood Mountains quadrangle is in north-central Nevada northeast of Winnemucca, the principal town in the region. The quadrangle includes two north-northeast-trending mountain ranges, the Osgood Mountains on the east and the Hot Springs Range on the west, which are separated by a narrow valley and are bounded on the east and west by broad alluviated basins. Large deposits of tungsten and gold have been mined in the northeastern part of the Osgood Mountains; small deposits of quicksilver, lead, zinc, and gold are known in the Hot Springs Range, and some prospecting has been done on barite deposits in the Osgood Mountains. Some quartzite beds are potential sources of silica.

Nevada↗
USGS2025

Geology and geochemistry of Ni-Co laterite occurrences of northern California and southern Oregon

Ni-Co laterite occurrences in the Klamath Mountains of southern Oregon and northern California contain Ni, Co, and Sc values comparable to global deposits. However, they are thin and limited in extent, often occurring as landslides and slumps. Olivine in the parent material contains Ni and Co and enstatite contains Sc. Through pervasive weathering, these elements where concentrated in Fe- and Mn-oxides. Unlike the mined Nickel Mountian deposit near Riddle, Oregon, these occurrences have no hydrous-Mg silicate minerals. Although the region experienced pervasive weathering in the Eocene, preservation of the laterite profiles was limited in the Klamath Mountains due to accelerated uplift and erosion compared to the Coast Range Provence.

Conference Paper↗
USGS2015

Geologic framework and evidence for neotectonism in the epicentral area of the 2011 Mineral, Virginia, earthquake

The epicenters of the main shock and associated aftershocks of the 2011 moment magnitude, M w 5.8 Mineral, Virginia (USA), earthquake, and the updip projection of the possible fault plane that triggered the quakes, are contained in the areas of 2 adjoining 7.5′ quadrangles in the central Virginia Piedmont. These quadrangles have therefore been the focus of concentrated geologic study in the form of bedrock and surficial mapping and near-surface trenching in order to identify potential seismogenic structures. Bedrock mapping has outlined a series of northeast-southwest–trending lithologic belts that include the Ordovician Chopawamsic and Quantico Formations, the narrow neck of the Late Ordovician Ellisville pluton, and mélange zone III of the Mine Run Complex. The region was affected by at least two ductile deformational events, one in the early Paleozoic that was broadly synchronous with the intrusion of the pluton, and one later in the Paleozoic. The earlier deformation produced the Quantico synclinorium and other regional folds, and the later deformation produced faults with associated high-strain zones. Two of these faults have been trenched at their intersection along the east-dipping eastern contact of the Ellisville neck, near where the causative fault for the earthquake projects to the surface. The trenches have exposed abundant evidence of post-Paleozoic fracturing and faulting, including brecciated quartz-tourmaline veins, slickensided thrust and strike-slip faults, and clay-filled fractures. Fluvial and colluvial gravels that overlie these brittle structures have yielded optically stimulated luminescence ages ranging from ca. 27 to 10 ka. These structures are likely representative of surface features associated with Quaternary earthquakes in the Central Virginia seismic zone.

GSA Special Papers↗
USGS2016

Potash—A vital agricultural nutrient sourced from geologic deposits

This report summarizes the primary sources of potash in the United States. Potash is an essential nutrient that, along with phosphorus and nitrogen, is used as fertilizer for growing crops. Plants require sufficient potash to activate enzymes, which in turn catalyze chemical reactions important for water uptake and photosynthesis. When potassium is available in quantities necessary for healthy plant growth, disease resistance and physical quality are improved and crop yield and shelf life are increased. Potash is a water-soluble compound of potassium formed by geologic and hydrologic processes. The principal potash sources discussed are the large, stratiform deposits that formed during retreat and evaporation of intracontinental seas. The Paradox, Delaware, Holbrook, Michigan, and Williston sedimentary basins in the United States are examples where extensive potash beds were deposited. Ancient marine-type potash deposits that are close to the surface can be mined using conventional underground mining methods. In situ solution mining can be used where beds are too deep, making underground mining cost-prohibitive, or where underground mines are converted to in situ solution mines. Quaternary brine is another source of potash that is recovered by solar evaporation in manmade ponds. Groundwater from Pleistocene Lake Bonneville (Wendover, Utah) and the present-day Great Salt Lake in Utah are sources of potashbearing brine. Brine from these sources pumped to solar ponds is evaporated and potash concentrated for harvesting, processing, and refinement. Although there is sufficient potash to meet near-term demand, the large marine-type deposits are either geographically restricted to a few areas or are too deep to easily mine. Other regions lack sources of potash brine from groundwater or surface water. Thus, some areas of the world rely heavily on potash imports. Political, economic, and global population pressures may limit the ability of some countries from securing potash resources in the future. In this context, a historical perspective on U.S. potash production in a global framework is discussed.

Open-File Report↗
USGS1974

Geologic and hydrologic considerations for various concepts of high-level radioactive waste disposal in conterminous United States

The purpose of this investigation is to evaluate and identify which geohydrologic environments in conterminous United States are best suited for various concepts or methods of underground disposal of high-level radioactive wastes and to establish geologic and hydrologic criteria that are pertinent to high-level waste disposal. The unproven methods of disposal include (1) a very deep drill hole (30,000-50,000 ft or 9,140-15,240 m), (2) a matrix of (an array of multiple) drill holes (1,000-20,000 ft or 305-6,100 m), (3) a mined chamber (1,000-10,000 ft or 305-3,050 m), (4) a cavity with separate manmade structures (1,000-10,000 ft or 305-3,050 m), and (5) an exploded cavity (2,000-20,000 ft or 610-6,100 m) o The geohydrologic investigation is made on the presumption that the concepts or methods of disposal are technically feasible. Field and laboratory experiments in the future may demonstrate whether or not any of the methods are practical and safe. All the conclusions drawn are tentative pending experimental confirmation. The investigation focuses principally on the geohydrologic possibilities of several methods of disposal in rocks other than salt. Disposal in mined chambers in salt is currently under field investigation, and this disposal method has been intensely investigated and evaluated by various workers under the sponsorship of the Atomic Energy Commission. Of the various geohydrologic factors that must be considered in the selection of optimum waste-disposal sites, the most important is hydrologic isolation to assure that the wastes will be safely contained within a small radius of the emplacement zone. To achieve this degree of hydrologic isolation, the host rock for the wastes must have very low permeability and the site must be virtually free of faults. In addition, the locality should be in (1) an area of low seismic risk where the possibility of large earthquakes rupturing the emplacement zone is very low, (2) where the possibility- of flooding by rise is very low, (3) where a possible return of glacial or pluvial climate will not cause potentially hazardous changes in surface- or ground-water regimens, and (4) where danger of exhumation by erosion is nil. The geographic location for an optimum site is one that is far removed from major drainages, lakes, and oceans, where population density is low, and where the topographic relief is gentle in order to avoid steep surface-water drainage gradients that would allow rapid distribution of contaminants in case of accident. The most suitable medium for the unproven deep drill-hole, matrix-holes, and exploded-cavity methods appears to be crystalline rocks, either intrusive igneous or metamorphic because of their potentially low permeabilities and high mechanical strengths. Salt (either in thick beds or stable domes), tuff, and possibly shale appear to be suitable for mined chambers and cavities with separate manmade structures. Salt appears to be suitable because of its very low permeability, high thermal conductivity, and natural plasticity. Tuff and shale appear suitable because of their very low permeabilities and high ion-exchange capacities. Sedimentary rocks other than shale and volcanic rocks, exclusive of tuff, are considered to be generally unsuitable for waste emplacement because of their potentially high permeabilities. Areas that appear to satisfy most geohydrologic requirements for the deep drill hole and the matrix holes include principally (1) the stable continental interior where the sedimentary cover is thin or absent, (2) the shield area of the North-Central States, and (3) the metamorphic belt of Eastern United States--primarily the Piedmont. These areas are possibly suitable also for the exploded cavity and the mined chamber because the possibility of finding rock with very- permeability at depths from 1,000? feet (305? m) to 20,000 feet (6,100 m) appears to be high. The Basin and Range province of Western United States, particula

Open-File Report↗
USGS2003

Mercury from mineral deposits and potential environmental impact

Mercury deposits are globally distributed in 26 mercury mineral belts. Three types of mercury deposits occur in these belts: silica-carbonate, hot-spring, and Almaden. Mercury is also produced as a by-product from several types of gold-silver and massive sulfide deposits, which account for 5% of the world's production. Other types of mineral deposits can be enriched in mercury and mercury phases present are dependent on deposit type. During processing of mercury ores, secondary mercury phases form and accumulate in mine wastes. These phases are more soluble than cinnabar, the primary ore mineral, and cause mercury deposits to impact the environment more so than other types of ore deposits enriched in mercury. Release and transport of mercury from mine wastes occur primarily as mercury-enriched particles and colloids. Production from mercury deposits has decreased because of environmental concerns, but by-product production from other mercury-enriched mineral deposits remains important.

Environmental Geology↗
USGS1998

Front Range Infrastructure Resources Project--Aggregate Resources Activities

Infrastructure, such as roads, buildings, airports, and dams, is built and maintained by use of large quantities of aggregate—sand, gravel, and stone. As urban areas expand, local sources of these resources become inaccessible. Other competitive land uses have a higher value than aggregate resources. For example, gravel cannot be mined from under a subdivision. The failure to plan for the protection and extraction of infrastructure resources often results in increased consumer cost, environmental damage, and an adversarial relationship between the industry and the community.

Fact Sheet↗
USGS1957

Results of U.S. Geological Survey exploration for uranium-vanadium deposits in the Club Mesa area, Uravan district, Montrose County, Colorado

Between 1948 and 1953, the U. S. Geological Survey conducted diamond-drill exploration in the Club Mesa. area in the western part of the Uravan district, Montrose County, Colo. This drilling, consisting of 662 holes totaling 170,095 feet, was done to find minable uranium-vanadium deposits and to appraise uranium-vanadium reserves of the Club Mesa area. Rocks exposed in the area are gently dipping sedimentary formations of Mesozoic age. Sandstone units in the upper part of the Salt Wash member of the Morrison formation of Jurassic age contain most of the known uranium-vanadium deposits in the area; all of the large deposits are in the uppermost sandstone unit of that member. Of the 195 holes that penetrated mineralized rock, 74 holes penetrated ore layers, and 37 penetrated mineralized layers of ore grade but less than 1 foot thick. All of the ore layers and ore-grade layers are in sandstone units in the upper part of the Salt Wash member. The ore layers are in the bottom half of the host sandstone unit in about 90 percent of the holes in ore and in the bottom quarter of the unit in over 60 percent of these holes. Indicated and inferred reserves of ore discovered by the drilling total about 200,000 short tons averaging about 0.35 percent U308 and 1.80 percent V205. About 80 percent of the estimated reserves were included in six mining leases granted by the U. S. Atomic Energy Commission on deposits discovered by the drilling. Nearly all of the ore layers and most of the mineralized layers penetrated, are in sandstone units 30 feet or more thick that are in contact with at least 6 inches of green or gray mudstone. If these minimum thicknesses are used as cutoffs to determine ground favorable for ore, about 10 percent of the Club Mesa area explored by the U.S. Geological Survey can be classified as favorable and contains nearly all of the ore reserves discovered.

Trace Elements Memorandum↗
USGS2008

Mineral resource of the month: antimony

The article describes the characteristics and industrial uses of antimony. Antimony, which is produced as a byproduct of mining other metals such as gold, lead or silver, is used in everything from flame retardants, batteries, ceramics and glass. It is also used in glass for television picture tubes, computer monitors, pigments and catalysts.

Earth↗
USGS2009

Mineral Commodity Summaries 2009

Each chapter of the 2009 edition of the U.S. Geological Survey (USGS) Mineral Commodity Summaries (MCS) includes information on events, trends, and issues for each mineral commodity as well as discussions and tabular presentations on domestic industry structure, Government programs, tariffs, 5-year salient statistics, and world production and resources. The MCS is the earliest comprehensive source of 2008 mineral production data for the world. More than 90 individual minerals and materials are covered by two-page synopses. For mineral commodities for which there is a Government stockpile, detailed information concerning the stockpile status is included in the two-page synopsis. Because specific information concerning committed inventory was no longer available from the Defense Logistics Agency, National Defense Stockpile Center, that information, which was included in earlier Mineral Commodity Summaries publications, has been deleted from Mineral Commodity Summaries 2009. National reserves and reserve base information for most mineral commodities found in this report, including those for the United States, are derived from a variety of sources. The ideal source of such information would be comprehensive evaluations that apply the same criteria to deposits in different geographic areas and report the results by country. In the absence of such evaluations, national reserves and reserve base estimates compiled by countries for selected mineral commodities are a primary source of national reserves and reserve base information. Lacking national assessment information by governments, sources such as academic articles, company reports, common business practice, presentations by company representatives, and trade journal articles, or a combination of these, serve as the basis for national reserves and reserve base information reported in the mineral commodity sections of this publication. A national estimate may be assembled from the following: historically reported reserves and reserve base information carried for years without alteration because no new information is available; historically reported reserves and reserve base reduced by the amount of historical production; and company reported reserves. International minerals availability studies conducted by the U.S. Bureau of Mines, before 1996, and estimates of identified resources by an international collaborative effort (the International Strategic Minerals Inventory) are the basis for some reserves and reserve base estimates. The USGS collects information about the quantity and quality of mineral resources but does not directly measure reserves, and companies or governments do not directly report reserves or reserve base to the USGS. Reassessment of reserves and reserve base is a continuing process, and the intensity of this process differs for mineral commodities, countries, and time period. Abbreviations and units of measure, and definitions of selected terms used in the report, are in Appendix A and Appendix B, respectively. A resource/reserve classification for minerals, based on USGS Circular 831 (published with the U.S. Bureau of Mines) is Appendix C, and a directory of USGS minerals information country specialists and their responsibilities is Appendix D. The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the MCS 2009 are welcomed.

Mineral Commodity Summaries↗
USGS2016

Aeromagnetic map of northwest Utah and adjacent parts of Nevada and Idaho

Two aeromagnetic surveys were flown to promote further understanding of the geology and structure in northwest Utah and adjacent parts of Nevada and Idaho by serving as a basis for geophysical interpretations and by supporting geological mapping, water and mineral resource investigations, and other topical studies. Although this area is in general sparsely populated, (except for cities and towns along the Wasatch Front such as Ogden and Brigham City), it encompasses metamorphic core complexes in the Grouse Creek and Raft River Mountains (figure 1) of interest to earth scientists studying Cenozoic extension. The region was shaken in 1909 and 1934 by M6+ earthquakes east of the Hansel Mountains (Doser, 1989; Arabasz and others, 1994); damage from the 1934 earthquake occurred as far east as Logan, Utah (http:// www.seis.utah.edu/lqthreat/nehrp_htm/1934hans/n1934ha1. shtml#urbse). The presence of Quaternary shield volcanoes and bimodal Pleistocene volcanism in Curlew Valley (Miller and others, 1995; Felger and others, 2016) as well as relatively high temperature gradients encountered in the Indian Cove drillhole in the north arm of Great Salt Lake (Blackett and others, 2014) may indicate some potential for geothermal energy development in the area (Miller and others, 1995). The area also hosts four significant mining districts, in the northern Pilot Range, the Goose Creek Mountains in the northwest corner of the map, the southern end of the Promontory Mountains, and the southwest part of the Raft River Mountains, although production notably waned after World War II (Doelling, 1980). Other prospects of interest include those in the southern Grouse Creek Mountains, Silver Island, and the northern Newfoundland Mountains. Large areas of northwest Utah are covered by young, surficial deposits or by Great Salt Lake or are down-dropped into deep Cenozoic basins, making extrapolation of bedrock geology from widely spaced exposures difficult or tenuous (figure 1). Local spatial variations in the Earth's magnetic field (evident as anomalies on aeromagnetic maps) reflect the distribution of magnetic minerals, primarily magnetite, in the underlying rocks. In many cases the volume content of magnetic minerals can be related to rock type, and abrupt spatial changes in the amount of magnetic minerals commonly mark lithologic or structural boundaries. Magnetic data reflect magnetization variations within the crust and are well suited for mapping the distribution of mafic igneous rocks, although felsic igneous rocks, some mineralized zones, and other rock types also can produce measurable magnetic anomalies. For these reasons, the U.S. Geological Survey (USGS) and Utah Geological Survey (UGS) contracted for the collection of aeromagnetic data in this area.

Idaho, Nevada, Utah↗
USGS2013

Descriptive models, grade-tonnage relations, and databases for the assessment of sediment-hosted copper deposits: with emphasis on deposits in the Central Africa Copperbelt, Democratic Republic of the Congo and Zambia: Chapter J in Global mineral resource assessment

The Central African Copperbelt (CACB) is one of the most important copper-producing regions of the world. The majority of copper produced in Africa comes from this region defined by the Neoproterozoic Katanga sedimentary basin of the southern Democratic Republic of the Congo (DRC) and northern Zambia. Copper in the CACB is mined from sediment-hosted stratabound copper deposits associated with red beds and includes the giant deposits in the Kolwezi and Tenge-Fungurume districts in the DRC and the Konkola-Musoshi and Nchanga-Chingola districts in Zambia. In recent years, sediment-hosted structurally controlled replacement and vein (SCRV) copper deposits, such as the giant Kansanshi deposit in Zambia have become important exploration targets in the CACB region. In 2011, the CACB accounted for 7.2 percent of the estimated global mine production of copper. Global production of copper is principally derived from porphyry and sediment-hosted copper deposits (57 and 23 percent, respectively). Almost 50 percent of the copper known to exist in sediment-hosted deposits (past production plus identified resources) is contained in the CACB, 25 percent is contained in the Zechstein Basin of northern Europe, and the remainder is contained in an additional 29 sedimentary basins distributed around the globe. The U.S. Geological Survey (USGS) led an assessment of undiscovered copper resources in the CACB as part of a global mineral resource assessment for undiscovered resources of potash, copper, and platinum-group elements in selected mineral deposit types. As part of the assessment process, available data for the CACB were compiled and evaluated. This report describes the results of that work, including new descriptive mineral-deposit and grade and tonnage models and spatial databases for deposits and occurrences, ore bodies and open pits. Chapter 1 of this report summarizes a descriptive model of sediment-hosted stratabound copper deposits. General characteristics and subtypes of sediment-hosted stratabound copper deposits are described based upon worldwide examples. Chapter 2 provides a global database of 170 sediment-hosted copper deposits, along with a statistical evaluation of grade and tonnage data for stratabound deposits, a comparison of stratabound deposits in the CACB with those found elsewhere, a discussion of the distinctive characteristics of the subtypes of sediment-hosted copper deposits that occur within the CACB, and guidelines for using grade and tonnage distributions for assessment of undiscovered resources in sediment-hosted stratabound deposits in the CACB. Chapter 3 presents a new descriptive model of sediment-hosted structurally controlled replacement and vein (SCRV) copper deposits with descriptions of individual deposits of this type in the CACB and elsewhere. Appendix A describes a relational database of tonnage, grade, and other information for more than 100 sediment-hosted copper deposits in the CACB. These data are used to calculate the pre-mining mineral endowment for individual deposits in the CACB and serve as the basis for the grade and tonnage models presented in chapter 2. Appendix B describes three spatial databases (Esri shapefiles) for (1) point locations of more than 500 sediment-hosted copper deposits and prospects, (2) projected surface extent of 86 selected copper ore bodies, and (3) areal extent of 77 open pits, all within the CACB.

Scientific Investigations Report↗