Geologic map of parts of the Patriot and Florence quadrangles, north-central Kentucky
Explore the source record for details and available documents.
Geologic Quadrangle↗
SEARCH · Geology Reports
Results for “Geologic Quadrangle”
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Geologic map of the Palisade quadrangle, Mesa County, Colorado
The Palisade 1:24,000 quadrangle is in Mesa County in western Colorado. Because the map area is dominated by various surficial deposits, the map depicts 22 different Quaternary units. Two prominent river terraces are present in the quadrangle containing gravels deposited by the Colorado River. The map area contains many mass movement deposits. Extensive landslide deposits are present along the eastern part of the quadrangle. These massive landslides originate on the flanks of Grand Mesa, in the Green River and Wasatch Formations, and flow west onto the Palisade quadrangle. In addition, large areas of the eastern and southern parts of the map are covered by extensive pediment surfaces. These pediment surfaces are underlain by debris flow deposits also originating from Grand Mesa. Material in these deposits consists of mainly subangular basalt cobbles and boulders and indicate that these debris flow deposits have traveled as much as 10 km from their source area. The pediment surfaces have been divided into 5 age classes based on their height above surrounding drainages. Two common bedrock units in the map area are the Mancos Shale and the Mesaverde Group both of Upper Cretaceous age. The Mancos shale is common in low lying areas near the western map border. The Mesaverde Group forms prominent sandstone cliffs in the north-central map area. The map is accompanied by a separate pamphlet containing unit descriptions, a section on geologic hazards (including landslides, piping, gullying, expansive soils, and flooding), and a section on economic geology (including sand and gravel, and coal). A table indicates what map units are susceptible to a given hazard. Approximately twenty references are cited at the end of the report.
Colorado↗
Geology and coal deposits of the Hymera quadrangle, Sullivan County, Indiana
The Hymera quadrangle is the fourth of a series of quadrangles that are being mapped by the Geological Survey, Indiana Department of Conservation, in cooperation with the United States Geological Survey, as part of a program of study and reappraisal of Indiana coal resources. The field work was done by the writer, assisted by Harold Hutchinson and Frank E. Kottlowski, during the summer of 1948. Corrections to the map were mad in the field in the summer of 1950. The purpose of the mapping is to show in detail the areal geology, the stratigraphy of the Pennsylvanian rocks, the extent and structure of the principal coal beds, the location and extent of mined-out areas, and the coal reserves. Outcrops were located on aerial photographs and on the topographic quadrangle map, which was enlarged to a scale of 1:16,000. Mined areas were plotted from mine maps and strip mine areas. Information on mines and drill holes was obtained from various published sources, from mine operators, and from records of the Indiana Bureau of Mines and Mining.
Indiana↗
Preliminary Surficial Geologic Map of the Mesquite Lake 30' X 60' Quadrangle, California and Nevada
The Quaternary surficial geologic map of the Mesquite Lake, California-Nevada 30'X60' quadrangle depicts deposit age and geomorphic processes of erosion and deposition, as identified by a composite of remote sensing investigations, laboratory analyses, and field work, in the arid to semi-arid Mojave Desert area, straddling the California-Nevada border. Mapping was motivated by the need to address pressing scientific and social issues such as understanding and predicting the effects of climate and associated hydrologic changes, human impacts on landscapes, ecosystem function, and natural hazards at a regional scale. As the map area lies just to the south of Las Vegas, Nevada, a rapidly expanding urban center, land use pressures and the need for additional construction materials are forecasted for the region. The map contains information on the temporal and spatial patterns of surface processes and hazards that can be used to model specific landscape applications. Key features of the geologic map include: (1) spatially extensive Holocene alluvial deposits that compose the bulk of Quaternary units (~25%), (2) remote sensing and field studies that identified fault scarps or queried faults in the Kingston Wash area, Shadow Mountains, southern Pahrump Valley, Bird Spring Range, Lucy Gray Mountains and Piute Valley, (3) a lineament indicative of potential fault offset is located in Mesquite Valley, (4) active eolian dunes and sand ramps located on the east side of Mesquite, Ivanpah, and Hidden Valleys adjacent to playas, (4) groundwater discharge deposits in southern Pahrump Valley, Spring Mountains, and Lucy Gray Mountains and (5) debris-flow deposits spanning almost the entire Quaternary period in age.
Open-File Report↗
Digital version of "Open-File Report 92-182: Geologic map of the Marl Mountains quadrangle, San Bernardino County, California"
This is a digital map database version of a previous U.S. Geological Survey Open-File Report, OF92-182. It contains 3 Arc/Info formatted coverages, distributed in Arc Interchange format, a plottable map representation of the database at 1:24,000 scale in Postscript and Adobe PDF formats, and the original map explanation pamphlet in text, Postscript, and Adobe PDF formats.
California↗
Digital version of "Open-File Report 92-181: Geologic map of the Indian Spring quadrangle, San Bernardino County, California"
This is a digital map database version of a previous printed geologic map, U.S. Geological Survey Open-File Report 92–181. The original paper map has been faithfully reproduced as a geologic map database for use in a GIS, and thus does not contain updated geologic information for the map area. This publication consists of three parts: Documentation in the form of a this publication's Open File text, or readme, describing the digital data, how to obtain it, as well as the original map explanation pamphlet. The documentation also consists of FGDC metadata, and a file describing any revisions to the data in this report. All of the documentaion components are available in a variety of file formats. Three Arc/Info (ESRI) formatted coverages of the geologic database, distributed in Arc Interchange (e00) format. The spatial databases in this component of the report consist vector-based GIS datasets that represent geologic contacts, faults, map units, and volcanic vents in the study area, as well as localities of K/Ar samples discussed in the original report, and geologic structure measurements. Plottable map representations of the database at 1:24,000 scale in PostScript and Adobe PDF formats. The plottable files consist of a color geologic map derived from the spatial database, composited with a topographic base map in the form of the USGS Digital Raster Graphic for the map area. Color symbology from each of these datasets is maintained, which can cause plot file sizes to be large.
California↗
Digital version of "Open-File Report 92-183: Geologic map of the Granite Spring Quadrangle, San Bernardino County, California"
This is a digital map database version of a previous printed geologic map, U.S. Geological Survey Open-File Report 92–183. The original paper map has been faithfully reproduced as a geologic map database for use in a GIS, and thus does not contain updated geologic information for the map area. This publication consists of three parts: 1. Documentation in the form of a this publication's Open File text, or readme, describing the digital data, how to obtain it, as well as the original map explanation pamphlet. The documentation also consists of FGDC metadata, and a file describing any revisions to the data in this report. All of the documentaion components are available in a variety of file formats. 2. Three Arc/Info (ESRI) formatted coverages of the geologic database, distributed in Arc Interchange (e00) format. The spatial databases in this component of the report consist vector-based GIS datasets that represent geologic contacts, faults, map units, and volcanic vents in the study area, as well as localities of K/Ar samples discussed in the original report, and geologic structure measurements. 3. Plottable map representations of the database at 1:24,000 scale in PostScript and Adobe PDF formats. The plottable files consist of a color geologic map derived from the spatial database, composited with a topographic base map in the form of the USGS Digital Raster Graphic for the map area. Color symbology from each of these datasets is maintained, which can cause plot file sizes to be large.
California↗
Digital version of "Open-File Report 92-179: Geologic map of the Cow Cove Quadrangle, San Bernardino County, California"
This is a digital map database version of a previous printed geologic map, U.S. Geological Survey Open-File Report 92–179. The original paper map has been faithfully reproduced as a geologic map database for use in a GIS, and thus does not contain updated geologic information for the map area. This publication consists of three parts: 1. Documentation in the form of a this publication's Open File text, or readme, describing the digital data, how to obtain it, as well as the original map explanation pamphlet. The documentation also consists of FGDC metadata, and a file describing any revisions to the data in this report. All of the documentaion components are available in a variety of file formats. 2. Three Arc/Info (ESRI) formatted coverages of the geologic database, distributed in Arc Interchange (e00) format. The spatial databases in this component of the report consist vector-based GIS datasets that represent geologic contacts, faults, map units, and volcanic vents in the study area, as well as localities of K/Ar samples discussed in the original report, and geologic structure measurements. 3. Plottable map representations of the database at 1:24,000 scale in PostScript and Adobe PDF formats. The plottable files consist of a color geologic map derived from the spatial database, composited with a topographic base map in the form of the USGS Digital Raster Graphic for the map area. Color symbology from each of these datasets is maintained, which can cause plot file sizes to be large.
California↗
Preliminary Geologic Map of the Lake Mead 30' X 60' Quadrangle, Clark County, Nevada, and Mohave County, Arizona
Introduction The geologic map of the Lake Mead 30' x 60' quadrangle was completed for the U.S. Geological Survey's Las Vegas Urban Corridor Project and the National Parks Project, National Cooperative Geologic Mapping Program. Lake Mead, which occupies the northern part of the Lake Mead National Recreation Area (LAME), mostly lies within the Lake Mead quadrangle and provides recreation for about nine million visitors annually. The lake was formed by damming of the Colorado River by Hoover Dam in 1939. The recreation area and surrounding Bureau of Land Management lands face increasing public pressure from rapid urban growth in the Las Vegas area to the west. This report provides baseline earth science information that can be used in future studies of hazards, groundwater resources, mineral and aggregate resources, and of soils and vegetation distribution. The preliminary report presents a geologic map and GIS database of the Lake Mead quadrangle and a description and correlation of map units. The final report will include cross-sections and interpretive text. The geology was compiled from many sources, both published and unpublished, including significant new mapping that was conducted specifically for this compilation. Geochronologic data from published sources, as well as preliminary unpublished 40Ar/39Ar ages that were obtained for this report, have been used to refine the ages of formal Tertiary stratigraphic units and define new informal Tertiary sedimentary and volcanic units.
Open-File Report↗
Geologic map of the Yacolt quadrangle, Clark County, Washington
The Yacolt 7.5' quadrangle is situated in the foothills of the western Cascade Range of southwestern Washington approximately 35 km northeast of Portland, Oregon. Since late Eocene time, the Cascade Range has been the locus of an active volcanic arc associated with underthrusting of oceanic lithosphere beneath the North American continent along the Cascadia Subduction Zone. Volcanic and shallow-level intrusive rocks emplaced early in the history of the arc underlie most of the Yacolt quadrangle, forming a dissected and partly glaciated terrain with elevations between 250 and 2180 ft (75 and 665 m). The bedrock surface slopes irregularly but steeply to the southwest, forming the eastern margin of the Portland Basin, and weakly consolidated Miocene and younger basin-fill sediments lap up against the bedrock terrain in the southern part of the map area. A deep canyon, carved by the East Fork Lewis River that flows westward out of the Cascade Range, separates Yacolt and Bells Mountains, the two highest points in the quadrangle. Just west of the quadrangle, the river departs from its narrow bedrock channel and enters a wide alluvial floodplain. Bedrock of the Yacolt quadrangle consists of near-horizontal strata of Oligocene volcanic and volcaniclastic rocks that comprise early products of the Cascade volcanic arc. Basalt and basaltic andesite flows predominate. Most were emplaced on the flanks of a large mafic shield volcano and are interfingered with crudely bedded sections of volcanic breccia of probable lahar origin and a variety of well bedded epiclastic sedimentary rocks. At Yacolt Mountain, the volcanogenic rocks are intruded by a body of Miocene quartz diorite that is compositionally distinct from any volcanic rocks in the map area. The town of Yacolt sits in a north-northwest-trending valley apparently formed within a major fault zone. Several times during the Pleistocene, mountain glaciers moved down the Lewis River valley and spread southward into the map area. The largest glacier(s) covered the entire map area north of the East Fork Lewis River except for the summit of Yacolt Mountain. As the ice receded, it left behind a sculpted bedrock topography thickly mantled by drift, and deposited outwash in the fault-bounded valley at Yacolt and along the East Fork Lewis River valley. This map is a contribution to a program designed to improve geologic knowledge of the Portland Basin region of the Pacific Northwest urban corridor, the densely populated Cascadia forearc region of western Washington and Oregon. More detailed information on the bedrock and surficial geology of the basin and its surrounding area is necessary to refine assessments of seismic risk, ground-failure hazards and resource availability in this rapidly growing region.
Scientific Investigations Map↗
Geologic map of the Camas Quadrangle, Clark County, Washington, and Multnomah County, Oregon
The Camas 7.5' quadrangle is in southwestern Washington and northwestern Oregon approximately 20 km east of Portland. The map area, bisected by the Columbia River, lies on the eastern margin of the Portland Basin, which is part of the Puget-Willamette Lowland that separates the Cascade Range from the Oregon Coast Range. Since late Eocene time, the Cascade Range has been the locus of an episodically active volcanic arc associated with underthrusting of oceanic lithosphere beneath the North American continent along the Cascadia Subduction Zone. Bedrock consists largely of basalt and basaltic andesite flows that erupted during late Oligocene time from one or more vents located outside the map area. These rocks crop out only north of the Columbia River: at the base of Prune Hill in Camas, where they dip southward at about 5°; and east of Lacamas Creek, where they dip to the southeast at 15 to 30°. The volcanic bedrock is unconformably overlain by Neogene sediments that accumulated as the Portland Basin subsided. In the Camas quadrangle, most of these sediments consist of basaltic hyaloclastic debris generated in the volcanic arc to the east and carried into the Portland Basin by the ancestral Columbia River. The dominant structures in the map area are northwest-striking dextral strike-slip faults that offset the Paleogene basin floor as well as the lower part of the basin fill. The Oligocene rocks at Prune Hill and to the east were uplifted in late Pliocene to early Pleistocene time within a restraining bend along one of these dextral faults. In Pleistocene time, basaltic andesite flows issued from a volcano centered on the west side of Prune Hill; another flow entered the map area from the east. These flows are part of the Boring volcanic field, which comprises several dozen late Pliocene and younger monogenetic volcanoes scattered throughout the greater Portland region. In latest Pleistocene time, the Missoula floods of glacial-outburst origin inundated the Portland Basin. The floods deposited huge bars of poorly sorted gravel in the lee of Prune Hill and west of the Sandy River. Volcanic debris from Mount Hood form a prominent delta at the mouth of the Sandy River. This map is a contribution to a program designed to improve geologic knowledge of the Portland Basin region of the Pacific Northwest urban corridor, the densely populated Cascadia forearc region of western Washington and Oregon. More detailed information on the bedrock and surficial geology of the basin and its surrounding area is necessary to refine assessments of seismic risk, ground-failure hazards and resource availability in this rapidly growing region.
Oregon, Washington↗
Geologic map of the Washougal quadrangle, Clark County, Washington, and Multnomah County, Oregon
The Washougal 7.5’ quadrangle spans the boundary between the Portland Basin and the Columbia River Gorge, approximately 30 km east of Portland, Oregon. The map area contains the westernmost portion of the Columbia River Gorge National Scenic area as well as the rapidly growing areas surrounding the Clark County, Washington, cities of Camas and Washougal. The Columbia River transects the map area, and two major tributaries, the Washougal River in Washington and the Sandy River in Oregon, also flow through the quadrangle. The Columbia, Washougal, and Sandy Rivers have all cut deep valleys through hilly uplands, exposing Oligocene volcanic bedrock in the north part of the map area and lava flows of the Miocene Columbia River Basalt Group in the western Columbia River Gorge. Elsewhere in the map area, these older rocks are buried beneath weakly consolidated to well-consolidated Neogene and younger basin-fill sedimentary rocks and Quaternary volcanic and sedimentary deposits. The Portland Basin is part of the Coastal Lowland that separates the Cascade Range from the Oregon Coast Range. The basin has been interpreted as a pull-apart basin located in the releasing stepover between two en echelon, northwest-striking, right-lateral fault zones. These fault zones are thought to reflect regional transpression, transtension, and dextral shear within the forearc in response to oblique subduction of the Pacific plate along the Cascadia Subduction Zone. The southwestern margin of the Portland Basin is a well-defined topographic break along the base of the Tualatin Mountains, an asymmetric anticlinal ridge that is bounded on its northeast flank by the Portland Hills Fault Zone, which is probably an active structure. The nature of the corresponding northeastern margin of the basin is less clear, but a series of poorly defined and partially buried dextral extensional structures has been hypothesized from topography, microseismicity, potential-field anomalies, and reconnaissance geologic mapping. This map is a contribution to a program designed to improve the geologic database for the Portland Basin region of the Pacific Northwest urban corridor, the densely populated Cascadia forearc region of western Washington and Oregon. Updated, more detailed information on the bedrock and surficial geology of the basin and its surrounding area will facilitate improved assessments of seismic risk, and resource availability in this rapidly growing region.
Oregon↗
Geochemical, aeromagnetic, and generalized geologic maps showing distribution and abundance of antimony and tungsten, Golconda and Iron Point quadrangles, Humboldt County, Nevada
Detailed geologic and geochemical studies of the four 7 1/2-minute quadrangles that make up the Edna Mountain 15-minute quadrangle in Humboldt County, Nevada, were begun during the 1969 summer field season. The objectives of the project are to map the geology of this structurally complex area at 1:24,000 scale and to determine the regional distribution and abundance of metals in rocks of the area and the factors that control the distribution and abundance of those metals. Tungsten-bearing hot-spring tufa, metalliferous black shale in Ordovician rocks , base-metal and barite deposits in Paleozoic sedimentary rocks, and copper molydbenum in granodiorite plutons of Cretaceous age occur in the Edna Mountain area. None of these deposits have been of much economic significance, although tungsten was mined from the hot-spring deposits during World War II.
Miscellaneous Field Studies Map↗
Geochemical, aeromagnetic, and generalized geologic maps showing distribution and abundance of gold and copper, Golconda and Iron Point quadrangles, Humboldt County, Nevada
Detailed geologic and geochemical studies of the four 7 1/2-minute quadrangles that make up the Edna Mountain 15-minute quadrangle in Humboldt County, Nevada, were begun during the 1969 summer field season. The objectives of the project are to map the geology of this structurally complex area at 1:24,000 scale and to determine the regional distribution and abundance of metals in rocks of the area and the factors that control the distribution and abundance of those metals. Tungsten-bearing hot-spring tufa, metalliferous black shale in Ordovician rocks, base-metal and barite deposits in Paleozoic sedimentary rocks, and copper-molybdenum in granodiorite plutons of Cretaceous age occur in the Edna Mountain area. None of these deposits have been of much economic signigicance, although tungsten was mined from the hot-spring deposits during World War II.
Nevada↗
Geologic Map of the Woodland Quadrangle, Clark and Cowlitz Counties, Washington
The Woodland 7.5' quadrangle is situated in the Puget-Willamette Lowland approximately 50 km north of Portland, Oregon (fig. 1). The lowland, which extends from Puget Sound into west-central Oregon, is a complex structural and topographic trough that lies between the Coast Range and the Cascade Range. Since late Eocene time, the Cascade Range has been the locus of an active volcanic arc associated with underthrusting of oceanic lithosphere beneath the North American continent along the Cascadia Subduction Zone. The Coast Range occupies the forearc position within the Cascadia arc-trench system and consists of a complex assemblage of Eocene to Miocene volcanic and marine sedimentary rocks. The Woodland quadrangle lies at the northern edge of the Portland Basin, a roughly 2000-km2 topographic and structural depression that is the northernmost of several sediment-filled structural basins, which collectively constitute the Willamette Valley segment of the Puget-Willamette Lowland (Beeson and others, 1989; Swanson and others, 1993; Yeats and others, 1996). The Portland Basin is approximately 70 km long and 30 km wide; its long dimension is oriented northwest. Its northern boundary coincides, in part, with the lower Lewis River, which flows westward through the center of the quadrangle. The Lewis drains a large area in the southern Washington Cascade Range, including the southern flank of Mount St. Helens approximately 25 km upstream from the quadrangle, and joins the Columbia River about 6 km south of Woodland (fig. 1). Northwest of Woodland, the Columbia River exits the broad floodplain of the Portland Basin and flows northward through a relatively narrow bedrock valley at an elevation near sea level. The flanks of the Portland Basin consist of Eocene through Miocene volcanic and sedimentary rocks that rise to elevations exceeding 2000 ft (610 m). Seismic-reflection profiles (L.M. Liberty, written commun., 2003) and lithologic logs of water wells (Swanson and others, 1993; Mabey and Madin, 1995) indicate that as much as 550 m of late Miocene and younger sediments have accumulated in the deepest part of the basin near Vancouver. Most of this basin-fill material was carried in from the east by the Columbia River but sediment deposited by streams draining the adjacent highlands are locally important. The Portland Basin has been interpreted as a pull-apart basin located in the releasing stepover between two en echelon, northwest-striking, right-lateral fault zones (Beeson and others, 1985, 1989; Beeson and Tolan, 1990; Yelin and Patton, 1991; Blakely and others, 1995). These fault zones are thought to reflect regional transpression and dextral shear within the forearc in response to oblique subduction of the Pacific Plate along the Cascadia Subduction Zone (Pezzopane and Weldon, 1993; Wells and others, 1998). The southwestern margin of the Portland Basin is a well-defined topographic break along the base of the Tualatin Mountains, an asymmetric anticlinal ridge that is bounded on its northeast flank by the Portland Hills Fault Zone (Balsillie and Benson, 1971; Beeson and others, 1989; Blakely and others, 1995), which is probably an active structure (Wong and others, 2001; Liberty and others, 2003). The nature of the corresponding northeastern margin of the basin is less clear, but a poorly defined and partially buried dextral extensional fault zone has been hypothesized from topography, microseismicity, potential field-anomalies, and reconnaissance geologic mapping (Beeson and others, 1989; Beeson and Tolan, 1990; Yelin and Patton, 1991; Blakely and others, 1995). Another dextral structure may control the north-northwest-trending reach of the Columbia River between Portland and Longview (Blakely and others, 1995; Evarts, 2002; Evarts and others, 2002). This map is a contribution to a U.S. Geological Survey program designed to improve the geologic database for the Portland Basin part of the Pacific Northwest urban corridor,
Scientific Investigations Map↗
Geologic map of the Lead Mountain 15’ quadrangle, San Bernardino County, California
The Lead Mountain 15’ quadrangle in the Mojave Desert contains a record of Jurassic, Cretaceous, Tertiary, and Quaternary magmatism. Small amounts of Mesoproterozoic(?) augen gneiss and Paleozoic and Mesozoic(?) metasedimentary rocks are preserved in small patches; they are intruded by voluminous Jurassic plutons of quartz diorite to granite composition and by Late Cretaceous granite of the Cadiz Valley batholith. Jurassic intrusive rocks include part of the Bullion Mountain Intrusive Suite and also younger dikes inferred to be part of the Jurassic Independence dike swarm. A contact-metamorphosed aureole 2 km wide in the Jurassic plutonic rocks fringes the Cadiz Valley batholith. Early Miocene dacitic magmatism produced a dense swarm of dikes in the eastern Bullion Mountains and the volcanic-intrusive remnant of a volcano at Lead Mountain. Tilting of the dike swarm from inferred vertical orientations may have resulted from Miocene tectonic extension. Conglomerate of Pliocene and (or) Miocene age is also tilted. Younger volcanism is recorded by Pliocene basalt of the Deadman Lake volcanic field, basalt of Lead Mountain (approximately 0.36 Ma), and the even younger basalt of Amboy. Quaternary sedimentation built alluvial fans and filled playas in the map area. Faulting in the dextral eastern California shear zone produced several northwest-striking faults in the quadrangle, some of them active into the Pleistocene and some that may have many kilometers of right-lateral offset.
California↗
Geologic map of the Barrymore Quadrangle (V-59), Venus
The Barrymore quadrangle (V–59) is a predominantly ridged plains region south of Imdr Regio, incorporating portions of Helen, Nuptadi, and Nsomeka Planitiae. The map area extends from lat 50°–75° S. and long 180°–240°, with nearly 70% coverage by cycle 1 synthetic aperture radar (SAR) images (left-look, incidence angles 16°–23°) and complete coverage by cycle 2 images (right-look, incidence angles 20°–25°) (fig. 1). The majority of the map area is covered by regional plains material that may either be smooth or deformed by wrinkle ridges or ridge belts of variable spacing. The difference in elevation between highest and lowest points in the map area is about 2.3 km. A north-south-oriented, 1,375-km linear ridge belt named “Saule Dorsa” is in the center of the region. The southern tip of this belt is intersected by a stratigraphically complicated, east-west-trending intermittent series of disrupted material, arcuate depressions and rises, regional plains, and volcanic centers. This region (hereafter referred to as the “east-west disrupted zone”) lies within a belt between 63°–67° S. extending from Kadlu Dorsa to Moombi Corona. A high concentration of canali-type channels (long sinuous lava channels that may contain subsidiary channels that branch off from the main channel [Baker and others, 1992; Komatsu and others, 1992]) occurs in Nsomeka Planitia. This includes Xulab Vallis and Citlalpul Valles, which form the eastern extent of a 3,000-km-long canali system (Komatsu and others, 1993). Three instances of canali bifurcation from north-south to east-west orientations occur in this region (fig. 2). Several large impact craters with fluidized ejecta blanket (FEB) outflows occur in the map area, along with some impact crater extended deposits (parabolas). The latter are mapped as surficial material using stipple patterns over the plains materials. These surficial deposits show variations in radar backscatter properties between cycle 1 and cycle 2 images related to orientation of aeolian dune or ripple faces (for example, Weitz and others, 1994; table 1). This region provides an interesting geologic setting for interpreting the history of regional and local plains formation and evolution, mainly due to development and subsequent deformation of the areally extensive plains units and accompanying canali (Komatsu and Baker, 1994).
IMAP↗
Geologic map of the Bonners Ferry 30' x 60' quadrangle, Idaho and Montana
This data set maps and describes the geology of the Bonners Ferry 30' x 60' quadrangle, Idaho and Montana. The bedrock geology of the Bonners Ferry quadrangle consists of sedimentary, metamorphic, and granitic rocks ranging in age from Middle Proterozoic to Eocene. Bedrock units include rocks of (1) the Middle Proterozoic Belt Supergroup (2) the Middle Proterozoic Deer Trail Group, (3) the Late Proterozoic Windermere Group, (4) miogeoclinal or shelf facies lower Paleozoic rocks, and (5) Mesozoic and Tertiary granitic rocks. The Belt Supergroup, a thick sequence of argillite, siltite, quartzite, and impure carbonate rocks up to 9,000 m thick, occurs in two non-contiguous sequences in the quadrangle: (1) the Clark Fork-Eastport Sequence east of the Purcell trench and (2) the Newport Sequence in the hanging wall of the Newport Fault. Only the two lowest Belt formations of the Newport Sequence are found in the Bonners Ferry quadrangle, but these two units are part of a continuous section, which extends southwestward to the town of Newport. Belt Supergroup rocks of the Clark Fork-Eastport Sequence are separated from those of the Newport Sequence by the Newport Fault, Priest River Complex, and Purcell Trench Fault. Some formations of the Belt Supergroup show differences in thickness and (or) lithofacies from one sequence to the other that are greater than those predicted from an empirical depositional model for the distances currently separating the sequences. These anomalous thickness and facies differences suggest that there has been a net contraction along structures separating the sequences despite Eocene extension associated with emplacement of the Priest River Complex. In addition to these two Belt sequences, probable Belt rocks are present in the Priest River Complex as high metamorphic grade crystalline schist and gneiss. Northwest of the Newport Sequence of Belt Supergroup is the Deer Trail Group, a distinct Middle Proterozoic sequence of argillite, siltite, quartzite, and carbonate rocks lithostratigraphically similar to the Belt Supergroup, but separated from all Belt Supergroup rocks by the Jumpoff Joe Fault. Rocks of the Deer Trail Group are pervasively phyllitic and noticeably more deformed than rocks in the Belt Supergroup sequences. Lithostratigraphically the Deer Trail Group is equivalent to part of the upper part of the Belt Supergroup. Differences in lithostratigraphy and thickness between individual Deer Trail and Belt units and between the Deer Trail and Belt sequences as a whole indicate that they were probably much farther apart when they were deposited. The Windermere Group is a lithologically varied sequence of volcanic rocks and coarse-grained, mostly immature, clastic sedimentary rocks up to 8,000 m thick. It is characterized by extreme differences in thickness and lithofacies over short distances caused by syndepositional faulting associated with initial stages of continental rifting in the Late Proterozoic. Strata of the Windermere Group unconformably overlie only the Deer Trail Group, and are nowhere found in depositional contact with Belt Supergroup rocks. Paleozoic rocks in the Bonners Ferry quadrangle consist of a thin, fault-bounded remnant preserved within the Clark Fork-Eastport Belt Supergroup Sequence. Mesozoic granitic rocks underlie at least 50 percent of the Bonners Ferry quadrangle. They fall into two petrogenetic suites, hornblende-biotite plutons and muscovite-biotite (two-mica) plutons, most of which are Cretaceous in age. Both suites are represented in the mid-crustal Priest River Complex and in the higher level plutons that flank the complex; by far the majority of the Priest River Complex are Cretaceous, two-mica bodies. Tertiary rocks are restricted to a single small stock, numerous hypabyssal dikes that are too small to show at the scale of the map, and to cataclastic rocks related to the Newport Fault. Quaternary deposits include unconsolidated to poorl
Miscellaneous Field Studies Map↗