Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Cells”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96Linked to original sources

Use of modflow drain package for simulating inter-basin transfer in abandoned coal mines

Simulation of groundwater flow in abandoned mines is difficult, especially where flux to and from mines is unknown or poorly quantified, and inter-basin transfer of groundwater occurs. A 3-year study was conducted in the Elkhorn area, West Virginia to better understand groundwater-flow processes and inter-basin transfer in above drainage abandoned coal mines. The study area was specifically selected, as all mines are located above the elevation of tributary receiving streams, to allow accurate measurements of discharge from mine portals and tributaries for groundwater model calibration. Abandoned mine workings were simulated in several ways, initially as a layer of high hydraulic conductivity bounded by lower permeability rock in adjacent strata, and secondly as rows of higher hydraulic conductivity embedded within a lower hydraulic conductivity coal aquifer matrix. Regardless of the hydraulic conductivity assigned to mine workings, neither approach to simulate mine workings could accurately reproduce the inter-basin transfer of groundwater from adjacent watersheds. To resolve the problem, a third approach was developed. The MODFLOW DRAIN package was used to simulate seepage into and through mine workings discharging water under unconfined conditions to Elkhorn Creek, North Fork, and tributaries of the Bluestone River. Drain nodes were embedded in a matrix of uniform hydraulic conductivity cells that represented the coal mine aquifer. Drain heads were empirically defined from well observations, and elevations were based on structure contours for the Pocahontas No. 3 mine workings. Use of the DRAIN package to simulate mine workings as an internal boundary condition resolved the inter-basin transfer problem, and effectively simulated a shift from a topographic- dominated to a dip-dominated flow system, by dewatering overlying unmined strata and shifting the groundwater drainage divide up dip within the Pocahontas No. 3 coal seam several kilometers into the adjacent Bluestone River Watershed. Model simulations prior to use of the DRAIN package for simulating mine workings produced estimated flows of 0.32 to 0.34 m3/s in each of the similar sized Elkhorn Creek and North Fork Watersheds, but failed to estimate inter-basin transfer of groundwater from the adjacent Bluestone River Watershed. The simulation of mine entries and discharge using the MODFLOW DRAIN package produced estimated flows of 0.46 and 0.26 m3/s for the Elkhorn Creek and North Fork watersheds respectively, which matched well measured flows for the respective watersheds of 0.47 and 0.26 m3/s.

West Virginia↗

Towards a comprehensive water quality modeling of Barnegat Bay: Development of ROMS to WASP Coupler

The Regional Ocean Modeling System (ROMS) has been coupled with the Water Quality Analysis Simulation Program (WASP) to be used in a comprehensive analysis of water quality in Barnegat Bay, New Jersey. The coupler can spatially aggregate hydrodynamic information in ROMS cells into larger WASP segments. It can also be used to resample ROMS output at a finer temporal scale to meet WASP time-stepping requirements. The coupler aggregates flow components, temperature, and salinity in ROMS output for input to WASP via a hydrodynamic linkage file. The coupler was tested initially with idealized cases designed to verify the water mass balance and conservation of constituent mass using one-to-one and one-to-many connectivity options between segments. A realistic example from the Toms River embayment, a subdomain of Barnegat Bay, was used to demonstrate the functionality of the coupling. A WASP eutrophication model accounting for dissolved oxygen (DO), nitrogen, and constant phytoplankton concentrations was applied to explore the distribution and trends in DO and nitrogen in the embayment for the period of July–August 2012. Results of DO modeling indicate satisfactory agreement with measurements collected at in-bay stations and also indicate that this coupled approach, despite substantial differences in spatiotemporal discretization between the models, provides adequate predictive capabilities.

New Jersey↗

Transient hazard model using radar data for predicting debris flows in Madison County, Virginia

During the rainstorm of June 27, 1995, roughly 330-750 mm of rain fell within a 16-hour period, initiating floods and over 600 debris flows in a small area (130 km2) of Madison County, VA. We developed a distributed version of Iverson's transient response model for regional slope stability analysis for the Madison County debris flows. This version of the model evaluates pore-pressure head response and factor of safety on a regional scale in areas prone to rainfall-induced shallow (<2-3 m) landslides. These calculations used soil properties of shear strength and hydraulic conductivity from laboratory measurements of soil samples collected from field sites where debris flows initiated. Rainfall data collected by radar every 6 minutes provided a basis for calculating the temporal variation of slope stability during the storm. The results demonstrate that the spatial and temporal variation of the factor of safety correlates with the movement of the storm cell. When the rainstorm was treated as two separate rainfall events and a larger hydraulic conductivity and friction angle than the laboratory values were used, the timing and location of landslides predicted by the model were in closer agreement with eyewitness observations of debris flows. Application of spatially variable initial pre-storm water table depth and soil properties may improve both the spatial and temporal prediction of instability.

Environmental & Engineering Geoscience↗

Bobjonesite, V4+ O (SO4) (H2O)3, a new mineral species from Temple Mountain, Emery County, Utah, U.S.A

Bobjonesite, V 4+ O (SO 4 ) (H 2 O) 3 , is a new mineral species from Temple Mountain, Emery County, Utah, U.S.A. It occurs as blue-green crusts and efflorescences in fractures in a fossil (Triassic) tree; individual crystals are <<1 mm and are intimately intergrown. Bobjonesite hydrates very easily, and is unstable in all but the driest atmosphere. Its structure was determined on a crystal of bobjonesite; however, the physical properties, optical properties and X-ray powder-diffraction pattern were recorded on the synthetic equivalent, and an electron-microprobe analysis was not possible. Bobjonesite has a pale blue streak, a vitreous luster and no observable fluorescence under ultraviolet light. It has no cleavage or parting. The Mohs hardness is ~1, and the calculated density is 2.28 g/cm 3 . Bobjonesite is biaxial positive, with α 1.555(2), β 1.561(1), γ 1.574(2), 2 V (obs.) = 72(1)°, 2 V (calc.) = 69°; it is non-pleochroic, X = b , Y ≈ a , Z ∧ c ≈ 19° (in β obtuse). Bobjonesite is monoclinic, space group P 2 1 / n , cell dimensions from single-crystal data: a 7.3940(5), b 7.4111(3), c 12.0597(9) Å, β 106.55(1)°, V 633.5(1) Å 3 , Z = 4. The strongest seven lines in the X-ray powder-diffraction pattern [ d in Å( I )( hkl )] are as follows: 5.795(100)(002), 3.498(90)(112), 3.881(48)(1̅03), 5.408(37) (101), 4.571(20)(012), 6.962(11)(1̅01) and 6.254(11)(011). The chemical formula was derived from crystal-structure analysis; the end-member formula is V O (SO 4 ) (H 2 O) 3 . The crystal structure of bobjonesite was refined to an R index of 3.6% for 1105 observed (| F o | > 5> F ) reflections measured with an automated four-circle X-ray diffractometer using Mo K α X-radiation. There is one V site occupied by V 4+ and surrounded by three O atoms and three (H 2 O) groups in an octahedral arrangement, with one short vanadyl bond (1.577 Å), four similar equatorial bonds (<2.022 Å>), and one longer V–O bond (2.278 Å) trans to the vanadyl bond. The structure consists of isolated [V 4+ 2 O 2 (H 2 O) 6 (SO 4 ) 2 ] clusters linked by hydrogen bonds.

Utah↗

Comment about the origin of micrinite

The granular micrinite in coal may result from the same process that acts during the peat stage to form fusain but dispersed humic matter, rather than organized plant tissue, seems to be involved in micrinite formation. The closely sized micrinite granules that occur in cell lumens of fragments of woody tissue in a few Paleozoic coals are exceptional and may be the result of selective infiltration. The morphologic distinction between micrinite and fusinite should not obscure the fundamental genetic relationship of these macerals.

Economic Geology↗

Genesis of ore deposits in the San Juan Volcanic Field, Southwestern Colorado-lead isotope evidence

In the San Juan volcanic area of southwestern Colorado, the isotopic composition of lead in ores and ore prospects of Cenozoic age ranges widely: 17.72 to 21.13 for 206 Pb/ 204 Pb; 15.50 to 15.81 for 207 Pb/ 204 Pb; and 37.21 to 38 for 208 Pb/ 204 Pb. Examination of the lead isotope data indicates that once deposition of lead minerals begins, further exchange of lead between fluid and wall rock is insignificant. This conclusion is supported by the relatively constant isotopic composition of the lead in these ores, which is not affected by the grade of ore mineralization or type of wall rock. The values of 206 Pb/ 204 Pb in some vein-type deposits exceed the maximum value known for all Mesozoic and Cenozoic igneous rocks of the Rocky Mountain region. These isotopic relations show that if ore-forming solutions are composed of meteoric water, as indicated in studies of light stable isotopes, they must have penetrated deep enough to acquire lead from Pre-cambrian rocks or sediments derived from them. The fact that some of these vein ores are now in Cenozoic igneous rocks indicates the ore fluid had an upward vertical component to its movement. The lead isotope data therefore support a circulating cell hypothesis for these kinds of ores, as suggested by many recent studies of light stable isotopes as related to mineralization. Some other deposits (Summitville, Jasper, Red Mountain district) have values of 206 Pb/ 204 Pb similar to those of the large volumes of altered rock that enclose them ( 206 Pb/ 204 Pb ∼ 18.5), suggesting that in places the lead may have been locally derived by leaching of the adjacent rocks or from magmatogenic fluids. When the lead isotope data are treated in detail, the rocks and galenas of the Platoro caldera complex, of the central San Juan caklera complex, and of the Baughman Creek center appear to contain significant components derived from 1,400- to l,500-m.y.-old and 1,700- to 1,800 m.y.-old source materials. These also are the ages of the two main groups of rocks that comprise the Precambrian basement under the San Juan volcanic area. Although the data from the western San Juan caldera complex scatter considerably, the only obvious source for the lead seems to be the 1,700- to l,800-m.y.-old rocks or detritus of such age in Phanerozoic sediments. Where the involvement of 1,400- to l,500-m.y.-old sources is greatest, the Th/U ratio in the source material is small (calculated to be about 0.7), whereas the Th/U ratio of the 1,700- to l,800-m.y.-old source material appears to be 2.3 to 3.3. The largest Th/U values are from the western San Juan caldera complex. © 1979 Society of Economic Geologists, Inc.

Colorado↗

Trace element content of gossans at four mines in the West Shasta massive sulfide district

We evaluated the trace element content of gossans at four mines in the West Shasta Cu-Zn mining district in California. We found little difference in trace element content between the chipped rock rind and whole-rock gossan samples. Gossans derived from disseminated sulfides were found to have a lower trace element content as well as a narrower range of values than did gossans derived from massive sulfides. Extreme differences in trace element concentrations in field duplicates of both chip and whole-rock gossan samples due to variations within the gossan bodies prevented use of the data at individual sampling sites for areal pattern studies. A computer program (REM), which uses a cell concept and groups the analysis of gossan at each mine, was used to characterize the trace element content. The gossan at the Mammoth mine had the highest anomaly magnitude and the highest element magnitudes for the most elements. Gossan at the Spread Eagle mine had a much different assemblage of elements relative to the other mines studied and had the lowest anomaly magnitude.

Economic Geology↗

Environment of ore deposition in the creede mining district, San Juan Mountains, Colorado: Part V. Epithermal mineralization from fluid mixing in the OH vein

Detailed fluid inclusion studies on coarse-grained sphalerite from the OH vein, Creede, Colorado, have shown that the abrupt color changes between growth zones correspond to abrupt changes in the nature of the ore fluids. Within each growth zone, however, the composition of the fluids remained constant. The base of a distinctive orange-brown growth zone marks a sharp increase in both temperature and salinity relative to the preceding yellow-white zone. The orange-brown growth zone can be correlated along much of the vein and is believed to represent a time-stratigraphic interval. Along the vein, temperatures and salinities of fluid inclusions within this interval show a systematic decrease from about 285??C and 11.5 wt percent NaCl equiv near the base of the vein to about 250??C and 8 wt percent NaCl equiv, respectively, near the top of the vein. The iron concentration of this sphalerite growth zone shows a similar pattern, decreasing from about 2.8 to 1.2 mole percent FeS. When plotted on an enthalpy-salinity diagram, the fluid inclusion data define a spatial trend indicating the progressive mixing of deeply circulating hydrothermal brines with overlying, dilute ground waters. The hydrothermal brines entered the OH vein from below at a temperature, salinity, and density of approximately 285??C, 11.5 wt percent NaCl equiv, and 860 kg/m3, respectively, whereas the overlying ground waters appear to have been preheated to roughly 150??C and had an assumed salinity of 0 wt percent and a density of 920 kg/m3. The greater density of the heated ground water promoted mixing with the hydrothermal brine within the open fractures, causing sphalerite deposition. Although there were also episodes of boiling during vein mineralization, boiling appears unimportant for this sphalerite. Isotopic evidence and geochemical modeling studies also indicate that mixing was the depositional mechanism for sphalerite. An important aspect of the mixing hydrology of the Creede system involves an aquitard overlying the OH vein. This low permeability zone restricted the flow of ground water into the vein from above and forced the upwelling hydrothermal fluids to flow laterally along the vein. The mixing environment thus occurred along the interface between a deeply circulating hydrothermal convection cell and a topographically driven shallow ground-water system.

Economic Geology↗

Application of a hollow-fiber, tangential-flow device for sampling suspended bacteria and particles from natural waters

The design and application of a hollow-fiber tangential-flow filtration device has been used to concentrate bacteria and suspended particles from large volume surface water and groundwater samples (i.e., hundreds of liters). Filtrate tlux rates (4&ndash;8 L min &minus;1 ) are equal to or faster than those of other devices that are based on continuous flow centrifugation and plate and frame filtration. Particle recovery efficiencies for inorganic particles (approximately 90%) were similar to other dewatering devices, but microbial cell recoveries (30&ndash;90%) were greatly improved by this technique relative to other currently available methods. Although requirements for operation and maintenance of the device are minimal, its size, as with other dewatering devices, limits its applicability at remote sample sites. Nevertheless, it has proven useful for sample collection in studies involving microbial transport and analysis of particle-associated trace inorganic solutes.

Journal of Environmental Quality↗

Characterizing the two-dimensional thermal conductivity distribution in a sand and gravel aquifer

Both hydrologic and thermal transport properties play a significant role in the movement of heat through permeable sedimentary material; however, the thermal conductivity is rarely characterized in detailed spatial resolution. As part of a study of the movement of thermal plumes through a sand and gravel aquifer, we have constructed a two-dimensional profile of thermal conductivity. This work consisted of: (i) measuring the thermal conductivity of the soil solids, λ s , for the main stratigraphic units using the steady-state divided-bar apparatus and estimating conductivity from mineral composition; (ii) measuring the volumetric water content and porosity using crosshole ground-penetrating radar; (iii) evaluating four models used to predict the apparent thermal conductivity, λ, of variably saturated soils and selecting the best model using the information-theoretic approach, (iv) calculating the λ field on a 0.25-m square cell grid using measured data and the selected model, and (v) simulating thermal transport within the two-dimensional domain using a finite element numerical model. The apparent thermal conductivity in the saturated aquifer ranges from 2.14 to 2.69 W m −1 K −1 with a mean of 2.42 W m −1 K −1 Numerical simulations show that the heterogeneous thermal conductivity field results in increased thermal dispersion that is most pronounced at the plume front. Our values for λ and λ s may be used for glacial soils with similar mineralogy and texture. Our methods may also be used at other sites to construct the thermal conductivity distribution.

Ontario↗

Determination of melanterite-rozenite and chalcanthite-bonattite equilibria by humidity measurements at 0.1 MPa

Melanterite (FeSO 4 ·7H 2 O)-rozenite (FeSO 4 ·4H 2 O) and chalcanthite (CuSO 4 ·5H 2 O)-bonattite (CuSO 4 ·3H 2 O) equilibria were determined by humidity measurements at 0.1 MPa. Two methods were used; one is the gas-flow-cell method (between 21 and 98 °C), and the other is the humiditybuffer method (between 21 and 70 °C). The first method has a larger temperature uncertainty even though it is more efficient. With the aid of humidity buffers, which correspond to a series of saturated binary salt solutions, the second method yields reliable results as demonstrated by very tight reversals along each humidity buffer. These results are consistent with those obtained by the first method, and also with the solubility data reported in the literature. Thermodynamic analysis of these data yields values of 29.231 ± 0.025 and 22.593 ± 0.040 kJ/mol for standard Gibbs free energy of reaction at 298.15 K and 0.1 MPa for melanterite-rozenite and chalcanthite-bonattite equilibria, respectively. The methods used in this study hold great potential for unraveling the thermodynamic properties of sulfate salts involved in dehydration reactions at near ambient conditions.

American Mineralogist↗

Wangyanite, PdNi8S8, a new Pd end-member mineral of the pentlandite group from the J-M reef, Stillwater Complex, Montana, USA

Wangyanite (IMA2024-008a), ideally PdNi 8 S 8 , is a Pd end-member mineral of the pentlandite group that was discovered in the J-M reef of the Stillwater Complex, Montana, USA. Wangyanite occurs as anhedral-subhedral granular crystals 200–400 µm in size, associated with isoferroplatinum, braggite, pentlandite, and chalcopyrite interstitial to plagioclase grains within anorthosite. Wangyanite exhibits a yellowish brown color with a black streak and a metallic luster. It is brittle with uneven fractures, and has a calculated density of 5.14 g/cm 3 . The mineral does not show discernible pleochroism, bireflectance, or anisotropy. It has an average composition of 9.95 wt.% Pd, 31.95 wt.% Ni, 25.02 wt.% Fe, 0.57 wt.% Co, 31.74 wt.% S, totaling 99.23 wt.%. The empirical formula, based on eight sulfur atoms per formula unit, is (Pd 0.76 Co 0.08 ) Σ0.84 (Ni 4.39 Fe 3.60 ) Σ7.99 S 8 . Wangyanite has a cubic cell with a space group of Fm -3 m (#225), having lattice parameters of a = 10.1167(12) Å, V = 1035.4(4) Å 3 , and Z = 4. Its crystal structure has been solved by single-crystal three-dimensional electron diffraction study. The strongest X-ray diffraction lines of wangyanite are claculated at [ d in Å ( I %)( hkl )]: 5.841(14.03)(111), 3.050(100)(311), 1.947(29.16)(115,333), 1.264(11.66)(800), 3.577(8.79)(220), 2.920(20.82)(222), and 2.321(9.34)(331). Wangyanite shares the same crystal structure as pentlandite, but the octahedrally coordinated site is mainly occupied by Pd in wangyanite. Based on the textural features and previous experimental Pd-Fe-Ni-S phase system, wangyanite could form by peritectic reaction between braggite, pentlandite and sulfide liquid. These mineral associations are stable in a Ni-Pd-rich sulfide melt system at about 550 °C or even lower temperature. Therefore, wangyanite can potentially serve as an indicator of the presence of Pd-rich residual melts. The mineral is named in honor of Prof. Christina Yan Wang, a well-known researcher on platinum-group element (PGE) occurrences and enrichment mechanisms in mafic-ultramafic intrusions, notably those deposits related to the Emeishan large igneous province in China.

Montana↗

Identification of larval Pacific lampreys (Lampetra tridentata), river lampreys (L. ayresi), and western brook lampreys (L. richardsoni) and thermal requirements of early life history stages of lampreys. Annual report 2002-2003

Two fundamental aspects of lamprey biology were examined to provide tools for population assessment and determination of critical habitat needs of Columbia River Basin (CRB) lampreys (the Pacific lamprey, Lampetra tridentata, and the western brook lamprey, L. richardsoni). We evaluated the usefulness of current diagnostic characteristics for identification of larval lampreys (i.e., pigment patterns) and collected material for development of meristic and morphometric descriptions of early life stage CRB lampreys, and we determined the effects of temperature on survival and development of early life stage CRB lampreys. Thirty-one larval lampreys were collected from locations throughout the CRB and transported to the Columbia River Research Laboratory. Lampreys were sampled at six-week intervals at which time they were identified to the species level based on current diagnostic characteristics. Sampling was repeated until lampreys metamorphosed, at which time species identification was validated based on dentition, or until they died, at which time they were preserved for genetic examination. These lampreys were sampled 30 times with two individuals metamorphosing, both of which were consistently identified, and subsequently validated, as Pacific lampreys. Of the remaining lampreys, only one was inconsistently identified (Pacific lamprey in 83% of the sampling events and western brook lamprey in 17% of the sampling events). These data suggest that pigmentation patterns do not change appreciably through time. In 2001 and 2002 we artificially spawned Pacific and western brook lampreys in the laboratory to provide material for meristic and morphometric descriptions. We collected, digitized, preserved, and measured the mean chorion diameter of Pacific and western brook lamprey embryos. Embryos ranged in development from 1 d post fertilization to just prior to hatch, and were incubated at 14 C. Mean chorion diameter was greater and more variable for Pacific lampreys (mean {+-} SD; 1.468 {+-} 0.107 mm, N = 320) than for western brook lampreys (1.237 {+-} 0.064 mm, N = 280). An unpaired t-test showed that the difference in mean chorion diameter between species was highly significant (t = 32.788, df = 528.62, P < 0.0001). For larvae, we collected, digitized, and preserved 156 individuals from each species. Eight homologous landmarks defining a two-cell truss network with two appended triangles were selected for morphometric analyses and species discrimination. A full model discriminant analysis correctly classified 92% of the Pacific lampreys and 93% of the western brook lampreys in a classification data set. When applied to a test data set, the classification functions correctly classified 91% of the Pacific lampreys and 85% of the western brook lampreys. A backward elimination discriminant analysis removed four variables from the full model, and the reduced model correctly classified 91% of the Pacific lampreys and 93% of the western brook lampreys in a classification data set. The reduced model classification functions correctly classified 91% of the Pacific lampreys and 85% of the western brook lampreys in a test data set. In 2001 and 2002 Pacific and western brook lampreys were artificially spawned and resulting progeny were reared in the laboratory at 10 C, 14 C, 18 C, and 22 C. The estimated temperature for zero development was 4.85 C for Pacific and 4.97 C for western brook lampreys. Survival was greatest at 18 C followed by 14 C, 10 C, and 22 C, with significant differences observed between 22 C and other temperatures. Overall survival was significantly greater for western brook than for Pacific lampreys, although the difference in proportion of individuals surviving was only 0.02. Survival to hatch was significantly greater than survival to the larval stage with a difference of only 0.03. The proportion of individuals exhibiting abnormalities at the larval stage was greatest at 22 C followed by 18 C, 10 C, and 14 C, with significant differences observed between 22 C and other temperatures.

Report↗

Commentary: A cautionary tale regarding use of the National Land Cover Dataset 1992

Digital land-cover data are among the most popular data sources used in ecological research and natural resource management. However, processes for accurate land-cover classification over large regions are still evolving. We identified inconsistencies in the National Land Cover Dataset 1992, the most current and available representation of land cover for the conterminous United States. We also report means to address these inconsistencies in a bird-habitat model. We used a Geographic Information System (GIS) to position a regular grid (or lattice) over the upper midwestern United States and summarized the proportion of individual land covers in each cell within the lattice. These proportions were then mapped back onto the lattice, and the resultant lattice was compared to satellite paths, state borders, and regional map classification units. We observed mapping inconsistencies at the borders between mapping regions, states, and Thematic Mapper (TM) mapping paths in the upper midwestern United States, particularly related to grass I and-herbaceous, emergent-herbaceous wetland, and small-grain land covers. We attributed these discrepancies to differences in image dates between mapping regions, suboptimal image dates for distinguishing certain land-cover types, lack of suitable ancillary data for improving discrimination for rare land covers, and possibly differences among image interpreters. To overcome these inconsistencies for the purpose of modeling regional populations of birds, we combined grassland-herbaceous and pasture-hay land-cover classes and excluded the use of emergent-herbaceous and small-grain land covers. We recommend that users of digital land-cover data conduct similar assessments for other regions before using these data for habitat evaluation. Further, caution is advised in using these data in the analysis of regional land-cover change because it is not likely that future digital land-cover maps will repeat the same problems, thus resulting in biased estimates of change.

Wildlife Society Bulletin↗

Use of buccal swabs for sampling DNA from nestling and adult birds

We evaluated the feasibility and efficiency of using swabs to collect buccal epithelial cells from small (2‐ to 13‐ g ) birds as a source of DNA for genetic studies. We used commercially available buccal swab kits to collect samples from 42 adult and 39 nestling (4‐ to 8‐day‐old) black‐capped chickadees (Poecile atricapillus) and from 6 4‐day‐old nestling boreal chickadees (P. hudsonica). We compared DNA from buccal epithelial samples to that from blood samples from the same individuals. We extracted sufficient quantities of DNA for analysis from all buccal samples, and samples remained viable even after being stored in original plastic sampling tubes at room temperature for up to 18 months. Yields were equivalent whether extracted using the proprietary quick‐extraction solution provided with buccal swab kits or using a salt‐extraction process with inexpensive reagents. Yields of DNA from buccal samples were consistently lower than those from blood samples, but quantities were sufficient for all analyses. Assignment of sex, based on DNA extracted from paired buccal and blood samples, was identical for all 87 birds. We found no difference in the genotypes obtained from buccal and blood samples for 12 individuals tested using 5 microsatellite loci and found perfect concordance in sequencing of an 823‐base‐pair segment within the control region of mitochondrial DNA for 7 individuals tested. Use of buccal swabs is highly recommended as a rapid, noninvasive technique for sampling avian genomic DNA, especially for extremely young altricial nestlings or small‐bodied adults, or for any birds for which blood sampling may be impossible or stressful.

Wildlife Society Bulletin↗

Ontogeny and evolution of salinity tolerance in anadromous salmonids: Hormones and heterochrony

Use of estuaries and oceans by salmonids varies greatly, from no use in nonanadromous species, to movement toward the sea soon after hatching and emergence in some Pacific salmon. This variation is accompanied by large differences in the ontogeny of salinity tolerance among salmonids. Some species acquire increased salinity tolerance early in development, whereas others develop this characteristic much later, indicating there is a heterochrony (change in timing) in the development of salinity tolerance in salmonids. The basic physiological mechanisms for ion regulation in seawater (such as increased gill chloride cells, gill Na + ,K + -ATPase activity, membrane permeability, and drinking rate) are common to all salmonids. What determines the differences in salinity tolerance among the salmonids is not the basic mechanisms for salt secretion but the environmental and ontogenetic control of these mechanisms. In salmonids such as pink and chum salmon that enter seawater soon after emergence, acclimation to seawater may be controlled largely by internal (ontogenetic) information. In smolting salmonids that acquire increased salinity tolerance 1–2 yr after hatching, photoperiod is the dominant environmental cue. In nonsmolting species that migrate 2–3 yr after hatching, salinity itself may be the primary stimulus for salt secretory mechanisms. Physiological changes triggered by developmental and environmental cues are mediated by endocrine factors. Treatments with cortisol, growth hormone, and insulin-like growth factor I have been shown to increase seawater tolerance of salmonids, whereas prolactin is inhibitory. Differences in developmental patterns of endocrine activity (such as secretion, binding proteins, and receptors) are hypothesized to be responsible for the differences in timing (heterochrony) of increased salinity tolerance among and within salmonid species.

Estuaries↗

Lead concentrations and reproduction in highway-nesting barn swallows

Swallows (Hirundo rustica) collected within the right-of-way of a major Maryland highway were greater than those found in Barn Swallows nesting within a rural area. Lead concentrations in the feathers of adults from the highway colony were also greater than Lead concentrations in the carcasses and stomach contents of adult and nestling Barn those of rural adults, but concentrations in the feathers of nestlings from the two locations were similar. Activity of u-aminolevulinic acid dehydratase in red blood cells was lower in highway-nesting adults and their young than in their rural counterparts, although hemoglobin concentrations and hematocrits did not differ. The number of eggs, nestlings, and body weights of the latter at 16-18 days of age were similar in the two colonies, as were body weights of adults from the two areas. These results suggest that contamination of roadside habitats by lead from automotive emissions does not pose a serious hazard to birds that are aerial feeders.

Condor↗

Metabolizability and partitioning of energy and protein in green plants by yearling lesser snow geese

We measured apparent metabolizability of organic matter, gross energy, nitrogen and cell wall constituents of pelleted alfalfa by Lesser Snow Geese ( Chen caerulescens caerulescens . We also used simultaneous measurements of energy expenditure and apparent metabolizable energy intake to estimate heat increment of feeding and net energy for production and maintenance. Apparent metabolizability of energy was 46% as a result of substantial retention of dietary cellulose (45%). Mean slope of the relationship between energy expenditure and apparent metabolizable energy intake, which estimates heat increment at feeding, was 0.33. One minus the slope, 0.67, was our estimate of the proportion of apparent metabolizable energy available for maintenance and production. Resting metabolic rate at zero apparent metabolizable energy intake ranged from 361 kJ· kg -1 · day -1 to 432 kJ· kg -1 · da y-1 , while apparent metabolizable energy intake required for energy balance ranged from 455 kJ· kg -1 · day -1 to 871 kJ· kg -1 · day -1 . Lesser Snow Geese (>2 kg mass) were more efficient at retaining dietary energy but possibly lost more of this energy as heat than smaller Black Brant ( Branta bernicla nigricans )(∼1 kg mass), suggesting a possible relationship between body size and processing of energy in herbivorous birds.

Alaska, Northwest Territories↗