SEARCH · Geology Reports

Results for “Water Resource Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94Linked to original sources

USGS2003

Simulation of net infiltration and potential recharge using a distributed-parameter watershed model of the Death Valley region, Nevada and California

This report presents the development and application of the distributed-parameter watershed model, INFILv3, for estimating the temporal and spatial distribution of net infiltration and potential recharge in the Death Valley region, Nevada and California. The estimates of net infiltration quantify the downward drainage of water across the lower boundary of the root zone and are used to indicate potential recharge under variable climate conditions and drainage basin characteristics. Spatial variability in recharge in the Death Valley region likely is high owing to large differences in precipitation, potential evapotranspiration, bedrock permeability, soil thickness, vegetation characteristics, and contributions to recharge along active stream channels. The quantity and spatial distribution of recharge representing the effects of variable climatic conditions and drainage basin characteristics on recharge are needed to reduce uncertainty in modeling ground-water flow. The U.S. Geological Survey, in cooperation with the Department of Energy, developed a regional saturated-zone ground-water flow model of the Death Valley regional ground-water flow system to help evaluate the current hydrogeologic system and the potential effects of natural or human-induced changes. Although previous estimates of recharge have been made for most areas of the Death Valley region, including the area defined by the boundary of the Death Valley regional ground-water flow system, the uncertainty of these estimates is high, and the spatial and temporal variability of the recharge in these basins has not been quantified. To estimate the magnitude and distribution of potential recharge in response to variable climate and spatially varying drainage basin characteristics, the INFILv3 model uses a daily water-balance model of the root zone with a primarily deterministic representation of the processes controlling net infiltration and potential recharge. The daily water balance includes precipitation (as either rain or snow), snow accumulation, sublimation, snowmelt, infiltration into the root zone, evapotranspiration, drainage, water content change throughout the root-zone profile (represented as a 6-layered system), runoff (defined as excess rainfall and snowmelt) and surface water run-on (defined as runoff that is routed downstream), and net infiltration (simulated as drainage from the bottom root-zone layer). Potential evapotranspiration is simulated using an hourly solar radiation model to simulate daily net radiation, and daily evapotranspiration is simulated as an empirical function of root zone water content and potential evapotranspiration. The model uses daily climate records of precipitation and air temperature from a regionally distributed network of 132 climate stations and a spatially distributed representation of drainage basin characteristics defined by topography, geology, soils, and vegetation to simulate daily net infiltration at all locations, including stream channels with intermittent streamflow in response to runoff from rain and snowmelt. The temporal distribution of daily, monthly, and annual net infiltration can be used to evaluate the potential effect of future climatic conditions on potential recharge. The INFILv3 model inputs representing drainage basin characteristics were developed using a geographic information system (GIS) to define a set of spatially distributed input parameters uniquely assigned to each grid cell of the INFILv3 model grid. The model grid, which was defined by a digital elevation model (DEM) of the Death Valley region, consists of 1,252,418 model grid cells with a uniform grid cell dimension of 278.5 meters in the north-south and east-west directions. The elevation values from the DEM were used with monthly regression models developed from the daily climate data to estimate the spatial distribution of daily precipitation and air temperature. The elevation values were also used to simulate atmosp

Water-Resources Investigations Report↗

USGS1997

Evaluation of agricultural best-management practices in the Conestoga River headwaters, Pennsylvania: Hydrology of a small carbonate site near Ephrata, Pennsylvania, prior to implementation of nutrient management

The U.S. Geological Survey, in cooperation with the U.S. Department of Agriculture and Pennsylvania Department of Environmental Protection, investigated the effects of agricultural best-management practices on water quality in the Conestoga River headwaters watershed. This report describes environmental factors and the surface-water and ground-water quality of one 47.5-acre field site, Field-Site 2, from October 1984 through September 1986, prior to implementation of nutrient management. The site is partially terraced agricultural cropland underlain by carbonate rock. Twenty-seven acres are terraced, pipe-drained, and are under no-till cultivation. The remaining acreage is under minimum-till cultivation. Corn is the primary crop. The average annual rate of fertilization at the site was 480 pounds per acre of nitrogen and 110 pounds per acre of phosphorus. An unconfined limestone and dolomitic aquifer underlies the site, Depth to bedrock ranges from 5 to 30 feet below land surface. Estimated specific yields range from 0.05 to 0.10, specific capacities of wells range from less than 1 to about 20 gallons per minute per foot of drawdown, and estimates of transmissivities range from 10 to 10,000 square feet per day. Average ground-water recharge was estimated to be about 23 inches per year. The specific capacity and transmissivity data indicate that two aquifer regimes are present at the site. Wells drilled into dolomites in the eastern part of the site have larger specific capacities (averaging 20 gallons per minute per foot of drawdown) relative to specific capacities (averaging less than 1 gallon per minute per foot of drawdown) of wells drilled into limestones in the western part of the site. Median concentrations of soil-soluble nitrate and soluble phosphorus in the top 4 feet of silt- or silty-clay-loam soil ranged from 177 to 329 and 8.5 to 35 pounds per acre, respectively. Measured runoff from the pipe-drained terraces ranged from 10 to 48,000 cubic feet and was 1.7 and 0.8 percent, respectively, of the 1985 and 1986 annual precipitation. An estimated 90,700 cubic feet of surface runoff carried 87 pounds to total nitrogen and 37 pounds of total phosphorus, or less that 0.65 percent of the amount of either nutrient applied during the study period. Rainfall on the snow-covered, frozen ground produced more that half of the runoff and nitrogen and phosphorus loads measured in pipe-drained runoff. Graphical and regression analyses of surface runoff suggest that (1) mean-storm concentrations of total nitrogen species and total phosphorus decreased with increasing time between a runoff event and the last previous nutrient application, and (2) mean total-phosphorus concentrations approached a baseline value (estimated at 2 to 5 milligrams per liter for total-phosphorus concentrations) after several months without nutrient applications. Dissolved nitrate concentrations in ground water in wells unaffected by an on-site ammonia spill ranged from 7.4 to 100 milligrams per liter. Average annual additions and removals of nitrogen were estimated. Nitrogen was added to the site by applications of manure and commercial fertilizer nitrogen, as well as by precipitation and ground water entering across the western site boundary. These sources of nitrogen accounted for 95, 3, 1, and 1 percent, respectively, of estimated additions. Nitrogen was removed from the site in harvested crops, by ground-water discharge, by volatilization, and in surface runoff, which accounted for 42, 28, 29, and less than 1 percent, respectively, of estimated removals.

Pennsylvania↗

USGS2004

Characterization of aquifer heterogeneity using cyclostratigraphy and geophysical methods in the upper part of the Karstic Biscayne Aquifer, Southeastern Florida

This report identifies and characterizes candidate ground-water flow zones in the upper part of the shallow, eogenetic karst limestone of the Biscayne aquifer in the Lake Belt area of north-central Miami-Dade County using cyclostratigraphy, ground-penetrating radar (GPR), borehole geophysical logs, and continuously drilled cores. About 60 miles of GPR profiles were used to calculate depths to shallow geologic contacts and hydrogeologic units, image karst features, and produce qualitative views of the porosity distribution. Descriptions of the lithology, rock fabrics, and cyclostratigraphy, and interpretation of depositional environments of 50 test coreholes were linked to the geophysical interpretations to provide an accurate hydrogeologic framework. Molluscan and benthic foraminiferal paleontologic constraints guided interpretation of depositional environments represented by rockfabric facies. Digital borehole images were used to characterize and quantify large-scale vuggy porosity. Preliminary heat-pulse flowmeter data were coupled with the digital borehole image data to identify candidate ground-water flow zones. Combined results show that the porosity and permeability of the karst limestone of the Biscayne aquifer have a highly heterogeneous and anisotropic distribution that is mostly related to secondary porosity overprinting vertical stacking of rock-fabric facies within high-frequency cycles (HFCs). This distribution of porosity produces a dual-porosity system consisting of diffuse-carbonate and conduit flow zones. The nonuniform ground-water flow in the upper part of the Biscayne aquifer is mostly localized through secondary permeability, the result of solution-enlarged carbonate grains, depositional textures, bedding planes, cracks, root molds, and paleokarst surfaces. Many of the resulting pore types are classified as touching vugs. GPR, borehole geophysical logs, and whole-core analyses show that there is an empirical relation between formation porosity, permeability, formation electrical conductivity, and GPR reflection amplitudes? as porosity and permeability increase, formation electrical conductivity increases and reflection amplitude decreases. This relation was observed throughout the entire vertical and lateral section of the upper part of the Biscayne aquifer in the study area. Further, upward-shallowing brackish- or freshwatercapped cycles of the upper part of the Fort Thompson Formation show low-amplitude reflections near their base that correspond to relatively higher porosity and permeability. This distribution is related to a systematic vertical stacking of rock-fabric facies within the cycle. Inferred flow characteristics of the porosity distribution within the upper part of the Biscayne aquifer were used to identify four ground-water flow classes, with each characterized by a discrete pore system that affects vertical and horizontal groundwater flow: (1) a low-permeability peat, muck, and marl ground-water flow class; (2) a horizontal conduit ground-water flow class; (3) a leaky, low-permeability ground-water flow class; and (4) a diffuse-carbonate ground-water flow class. At the top of the Biscayne aquifer, peat, muck, and marl can combine to form a relatively low-permeability layer of Holocene sediment that water moves through slowly. Most horizontal conduit flow is inferred to occur along touching vugs in portions of the following rock-fabric facies: (1) touchingvug pelecypod floatstone and rudstone, (2) sandy touching-vug pelecypod floatstone and rudstone, (3) vuggy wackestone and packstone, (4) laminated peloid grainstone and packstone, (5) peloid grainstone and packstone, and (6) peloid wackestone and packstone. Gastropod floatstone and rudstone, mudstone and wackestone, and pedogenic limestone rock-fabric facies are the main hosts for leaky, low-permeability units.

Florida↗

USGS2000

Geothermal hydrology of Valles Caldera and the southwestern Jemez Mountains, New Mexico

The Jemez Mountains in north-central New Mexico are volcanic in origin and have a large central caldera known as Valles Caldera. The mountains contain the Valles geothermal system, which was investigated during 1970-82 as a source of geothermal energy. This report describes the geothermal hydrology of the Jemez Mountains and presents results of an earlier 1972-75 U.S. Geological Survey study of the area in light of more recent information. Several distinct types of thermal and nonthermal ground water are recognized in the Jemez Mountains. Two types of near-surface thermal water are in the caldera: thermal meteoric water and acid sulfate water. The principal reservoir of geothermal fluids is at depth under the central and western parts of the caldera. Nonthermal ground water in Valles Caldera occurs in diverse perched aquifers and deeper valley-fill aquifers. The geothermal reservoir is recharged by meteorically derived water that moves downward from the aquifers in the caldera fill to depths of 6,500 feet or more and at temperatures reaching about 330 degrees Celsius. The heated geothermal water rises convectively to depths of 2,000 feet or less and mixes with other ground water as it flows away from the geothermal reservoir. A vapor zone containing steam, carbon dioxide, and other gases exists above parts of the liquid-dominated geothermal zone. Two subsystems are generally recognized within the larger geothermal system: the Redondo Creek subsystem and the Sulphur Creek subsystem. The permeability in the Redondo Creek subsystem is controlled by stratigraphy and fault-related structures. Most of the permeability is in the high-angle, normal faults and associated fractures that form the Redondo Creek Graben. Faults and related fractures control the flow of thermal fluids in the subsystem, which is bounded by high-angle faults. The Redondo Creek subsystem has been more extensively studied than other parts of the system. The Sulphur Springs subsystem is not as well defined. The upper vapor-dominated zone in the Sulphur Creek subsystem is separated from the liquid-dominated zone by about 800 feet of sealed caldera-fill rock. Acid springs occur at the top of the vapor zone in the Sulphur Springs area. Some more highly permeable zones within the geothermal reservoir are interconnected, but the lack of interference effects among some wells during production tests suggests effective hydraulic separation along some subsystem boundaries. Chemical and thermal evidence suggests that the Sulphur Springs subsystem may be isolated from the Redondo Creek subsystem and each may have its own zone of upflow and lateral outflow. The area of the entire geothermal reservoir is estimated to be about 12 to 15 square miles; its western limit generally is thought to be at the ring-fracture zone of the caldera. The top of the reservoir is generally considered to be the bottom of a small- permeability 'caprock' that is about 2,000 to 3,000 feet below land surface. Estimated thicknesses to the bottom of the reservoir range from 2,000 to 6,000 feet. Reservoir temperatures measured in exploration wells range from 225 degrees Celsius just below the caprock to about 330 degrees Celsius in deeper drill holes. Pressures measured in exploration wells in the Redondo Creek area ranged from 450 to 1,850 pounds per square inch. Steam-producing zones have been encountered above the liquid- dominated zones in wells, but the extent of steam zones is not well defined. The reservoir contains a near-neutral, chloride-type water containing about 7,000 milligrams per liter dissolved solids. No thermal springs in the caldera have geochemical characteristics similar to those of the geothermal reservoir fluids sampled in wells. Oxygen-18 and deuterium isotope concentrations of geothermal reservoir fluid indicate a meteoric origin. The moat valleys in

Water-Resources Investigations Report↗

USGS1999

Traveltimes along Clear Creek and selected tributaries upstream from Golden, Colorado, 1996-97

Increased traffic along mountainous stretches of Interstate Highway 70, U.S. Highway 40, and U.S. Highway 6 in Colorado has resulted in a corresponding increase in the movement of hazardous materials. The proximity of Clear Creek and its tributaries to these highways places downstream water users at risk in the event of an accidental hazardous-material release. A traveltime study was performed on two reaches of Clear Creek and two of its tributaries to provide the necessary information to allow downstream water managers to protect water supplies in the event of a hazardous-material release. The information also can be used by hazardous-materialresponse teams to intercept contaminants as they move downstream. This report summarizes the methods and findings of the traveltime study. Traveltime measurements were made using rhodamine-WT dye as a tracer in two reaches of Clear Creek and two Clear Creek tributaries in Clear Creek and Jefferson Counties, Colorado. The reaches were Clear Creek from the town of Berthoud Falls to the city limits of Golden; Clear Creek from the eastern edge of the Loveland Basin Ski Area parking lot to the town of Georgetown; the headwaters of two Clear Creek tributaries near Loveland Pass to the Loveland Valley Ski Area; and two unnamed tributaries of Hoop Creek (a tributary of Clear Creek) near Berthoud Pass to the confluence with the West Fork of Clear Creek. Measurements were made at three times of the year to obtain data from different flow conditions. Traveltime and average velocities were determined for each stream reach. During high flow, dye-cloud leading-edge traveltimes ranged from about 0.6 hour along the Loveland Pass to the Loveland Valley Ski Area drainage to about 8.8 hours between Berthoud Falls and Golden. During low flow, leading-edge traveltimes ranged from about 2.6 hours along the same drainage from Loveland Pass to about 28.6 hours between Berthoud Falls and Golden. Average velocity between the Loveland Pass sites ranged from about 1.3 miles per hour during high flow to about 0.3 mile per hour during low flow. Average velocities between Berthoud Falls and Golden ranged from about 4.4 miles per hour during high flow to about 1.3 miles per hour during low flow. A curve-fitting program was used to fit Lorentz and Gaussian distributions to the data generated from the traveltime measurements. Because discrete (not continuous) traveltime measurements were made, an estimate of the actual time of the leading edge, peak, and trailing edge needed to be determined from the sample data. The curve-fitting program provided the means to calculate the timing of events (leading edge, peak, and trailing edge) that were not precisely measured. Calculated leading-edge, peak, and trailing-edge times were used to generate a series of graphs for each study reach. Traveltime estimation tables were generated from the data for a range of Clear Creek discharges. Because of the high variability of discharge within the basin, the Lawson surface-water gage located near the center of the basin was used as the reference location. Discharge measurements for the Lawson gage are available on the Internet, which can be accessed by most hazardous-material-team dispatchers. Traveltimes determined during the individual studies were plotted against the corresponding discharge at the reference location. A curve-fitting program was used to generate a series of curves, which were used to produce traveltime estimation tables.

Colorado↗

USGS1996

Water quality of the lower Columbia River Basin: Analysis of current and historical water-quality data through 1994

The lower Columbia River Basin includes the river basins draining into the Columbia River below Bonneville Dam—the largest of which is the Willamette River. This report presents the results of a study by the U.S. Geological Survey, done in cooperation with the Lower Columbia River Bi-State Water- Quality Program, to describe the water-quality conditions in the lower Columbia River Basin by interpreting historical data collected and data collected in 1994. Historical water-quality data spanning more than 50 years and comprising more than 200 parameters were collated for interpretation in this report. The U.S. Geological Survey, the Oregon Department of Environmental Quality, and the Washington Department of Ecology collected water-quality data at 10 sites in the lower Columbia River Basin from January to December of 1994. Water-quality constituents measured in 1994 were screened against U.S. Environmental Protection Agency (EPA) and State guidelines. Arsenic, a human carcinogen, was detected in 15 of 16 samples in the lower Columbia River, but was not detected in any of the sampled tributaries. All 15 arsenic detections had concentrations that exceeded both the EPA ambient water-quality criteria for the protection of human health and the EPA human-health advisories for drinking water. Chromium was detected at all four Columbia River sites—most frequently in the Columbia River at Hayden Island. None of the chromium concentrations detected, however, exceeded water-quality criteria or guidelines. Measurements of suspended trace-element concentrations (trace-element concentrations associated with the suspended-sediment fraction) showed that the suspended form is the dominant transport phase for aluminum, iron, and manganese, whereas the dissolved form is the dominant transport phase for arsenic, barium, chromium, and copper. On the basis of tributary loads during summer low-flow months, sources of suspended silver, nickel, aluminum, and antimony exist in the lower Columbia River Basin, whereas the sources of suspended zinc and arsenic exist outside of the lower basin. Twenty organic compounds were detected of the 47 compounds analyzed for this study. None of the organic compounds measured exceeded EPA’s ambient water-quality criteria or drinking-water guidelines. The Willamette River at Portland had the largest number of detections, and all 20 compounds were detected at one time or another at that site. The largest concentrations of the agricultural pesticides, atrazine, metolachlor, and simazine were detected in the Willamette River, where they were detected in 93, 86, 93 percent, respectively, of the samples collected. The highest concentrations of atrazine in the Willamette River were associated with the spring application and fall runoff periods. Both historical and current data showed that the highest water temperatures in the lower Columbia River Basin are present during August. For water years 1977–81 in the Columbia River at Bradwood (river mile 38.9), 75 percent of the daily mean water temperatures during August exceeded 20 degrees Celsius, a “special condition” criterion for the State of Washington. The special condition criterion was exceeded at four sites on the lower Columbia River during July and August, 1994—a period coinciding with season-high air temperatures and low streamflow. Trend tests using data from 1974 to 1994 showed significant (r < 0.05) upward trends for water temperature at the Columbia River at Warrendale and the Willamette River at Portland. Concentrations of dissolved oxygen and total dissolved gas were above saturation levels during high stormflows in the lower Columbia River and the Willamette River during 1994. The high concentrations of total dissolved gas in the Columbia River exceeded Oregon and Washington State standards of 110 percent of saturation and were caused by spilling water at the Columbia River dams. Aquatic life in the lower Columbia River Basin was not subjected to low dissolved-oxygen concentrations. Comparison of dissolved-oxygen concentrations in the Willamette River from 1949–58 to 1972–94 showed a significant increase in dissolved-oxygen concentrations during the low-streamflow months of summer. Trend tests showed significant (r < 0.05) downward trends from 1973 to 1994 for three constituents at the Columbia River at Warrendale: phosphorus in unfiltered water, total dissolved solids, and specific conductance. These trends may be a consequence of more conservative agricultural practices in the area upstream from Warrendale.

Oregon↗

USGS1996

Effects of coal-mine discharges on the quality of the Stonycreek River and its tributaries, Somerset and Cambria counties, Pennsylvania

This report describes the results of a study by the U.S. Geological Survey, done in cooperation with the Somerset Conservation District, to locate and sample abandoned coal-mine discharges in the Stonycreek River Basin, to prioritize the mine discharges for remediation, and to determine the effects of the mine discharges on water quality of the Stonycreek River and its major tributaries. From October 1991 through November 1994, 270 abandoned coal-mine discharges were located and sampled. Discharges from 193 mines exceeded U.S. Environmental Protection Agency effluent standards for pH, discharges from 122 mines exceeded effluent standards for total-iron concentration, and discharges from 141 mines exceeded effluent standards for total-manganese concentration. Discharges from 94 mines exceeded effluent standards for all three constituents. Only 40 mine discharges met effluent standards for pH and concentrations of total iron and total manganese. A prioritization index (PI) was developed to rank the mine discharges with respect to their loading capacity on the receiving stream. The PI lists the most severe mine discharges in a descending order for the Stonycreek River Basin and for subbasins that include the Shade Creek, Paint Creek, Wells Creek, Quemahoning Creek, Oven Run, and Pokeytown Run Basins. Passive-treatment systems that include aerobic wetlands, compost wetlands, and anoxic limestone drains (ALD's) are planned to remediate the abandoned mine discharges. The successive alkalinity-producing-system treatment combines ALD technology with the sulfate reduction mechanism of the compost wetland to effectively remediate mine discharge. The water quality and flow of each mine discharge will determine which treatment system or combination of treatment systems would be necessary for remediation. A network of 37 surface-water sampling sites was established to determine stream-water quality during base flow. A series of illustrations show how water quality in the mainstem deteriorates downstream because of inflows from tributaries affected by acidic mine discharges. From the upstream mainstem site (site 801) to the outflow mainstem site (site 805), pH decreased from 6.8 to 4.2, alkalinity was completely depleted by inflow acidities, and total-iron discharges increased from 30 to 684 pounds per day. Total-manganese and total-sulfate discharges increased because neither constituent precipitates readily. Also, discharges of manganese and sulfate entering the mainstem from tributary streams have a cumulative effect. Oven Run and Pokeytown Run are two small tributary streams significantly affected by acidic mine drainage (AMD) that flow into the Stonycreek River near the town of Hooversville. The Pokeytown Run inflow is about 0.5 mile downstream from the Oven Run inflow. These two streams are the first major source of AMD flowing into the Stonycreek River. Data collected on the Stonycreek River above the Oven Run inflow and below the Pokeytown Run inflow show a decrease in pH from 7.6 to 5.1, a decrease in alkalinity concentration from 42 to 2 milligrams per liter, an increase in total sulfate discharge from 18 to 41 tons per day, and an increase in total iron discharge from 29 to 1,770 pounds per day. Data collected at three mainstem sites on the Stonycreek River below Oven Run and Pokeytown Run show a progressive deterioration in river water quality from AMD. Shade Creek and Paint Creek are other tributary streams to the Stonycreek River that have a significant negative effect on water quality of the Stonycreek River. One third of the abandoned-mine discharges sampled were in the Shade Creek and Paint Creek Basins.

Pennsylvania↗

USGS1995

Characteristics, transport, and yield of sediment in Juday Creek, St. Joseph County, Indiana, 1993-94

Juday Creek is a tributary of the St. Joseph River in St. Joseph County, north-central Indiana. The creek has been identified as one of the few streams in the State that can support a naturally reproducing brown trout population. A recent study of benthic invertebrates shows a decline in the production rate of insect species and suggests that this decline may be caused by increased sedimen- tation. This report presents the results of a study of the sediment conditions in Juday Creek from April 1993 through June 1994. Measurements of streamflow, suspended sediment, and bedload were made at six sampling sites during three storms and a period of low flow. A total of 11 samples were collected during storms, and 1 sample was collected during low flow at each site. Bed-material samples were collected at the six sites. Sediment cores were collected from the delta of an instream pond and at a sediment trap near the mouth of the stream. Scour and fill at the six sites were monitored by means of scour chains and surveyed cross sections. The instream pond was surveyed twice, and the volume weight of the sediment was determined to estimate the yield of sediment for the upper reach of Juday Creek. Particle-size distributions indicate that the bed material is predominantly sand and gravel and that very little of the bed material is silt or finer (less than 0.062 millimeter). Analysis of sediment cores showed that most of the sediment deposited in the sediment trap and instream pond was sand. Sediment sampling during a period of low flow detected only minimal concentrations of suspended sediment; the maximum concentration was 6 milligrams per liter, equivalent to a daily load of 0.32 ton. Bedload ranged from 5.2 to 76.7 grams per cross- channel sampling, equivalent to 0.11 to 1.70 tons per day. Sediment sampling during the storms indicates that bedload discharge is the primary mode of sediment transport. Suspended-sediment concentration ranged from 4 to 67 milligrams per liter; the median was 17 milligrams per liter. Bedload ranged from 3.4 to 862 grams per cross- channel sampling; the median was 109 grams. Only 15 percent of the samples were less than 50 grams. Scour chains and surveyed cross sections documented some scour and fill at most of the sites.Scour and fill tended to balance out; after a 1-year period, the net change in the streambed altitude was minimal. Some infilling was the net result at most of the sites. Surveys of the instream pond determined that the volume of sediment delivered to the pond from April 1993 to April 1994 was approximately 26,500 cubic feet. The average volume weight of the sediment was determined to be 102 pounds per cubic foot. The sediment yield for the upper reach of Juday Creek from April 1993 to April 1994 was estimated to be 48 tons per square mile.

Indiana↗

USGS2003

Aquifer tests and simulation of ground-water flow in Triassic sedimentary rocks near Colmar, Bucks and Montgomery Counties, Pennsylvania

This report presents the results of a study by the U.S. Geological Survey in cooperation with the U.S. Environmental Protection Agency to evaluate ground-water flow in Triassic sedimentary rocks near Colmar, in Bucks and Montgomery Counties, Pa. The study was conducted to help the U.S. Environmental Protection Agency evaluate remediation alternatives at the North Penn Area 5 Superfund Site near Colmar, where ground water has been contaminated by volatile organic solvents (primarily trichloroethene). The investigation focused on determining the (1) drawdown caused by separately pumping North PennWater Authority wells NP–21 and NP–87, (2) probable paths of groundwater movement under present-day (2000) conditions (with NP–21 discontinued), and (3) areas contributing recharge to wells if pumping from wells NP-21 or NP–87 were restarted and new recovery wells were installed. Drawdown was calculated from water levels measured in observation wells during aquifer tests of NP–21 and NP–87. The direction of ground-water flow was estimated by use of a three-dimensional ground-water-flow model. Aquifer tests were conducted by pumping NP–21 for about 7 days at 257 gallons per minute in June 2000 and NP–87 for 3 days at 402 gallons per minute in May 2002. Drawdown was measured in 45 observation wells during the NP–21 test and 35 observation wells during the NP–87 test. Drawdown in observation wells ranged from 0 to 6.8 feet at the end of the NP–21 test and 0.5 to 12 feet at the end of the NP–87 test. The aquifer tests showed that ground-water levels declined mostly in observation wells that were completed in the geologic units penetrated by the pumped wells. Because the geologic units dip about 27 degrees to the northwest, shallow wells up dip to the southeast of the pumped well showed a good hydraulic connection to the geologic units stressed by pumping. Most observation wells down dip from the pumping well penetrated units higher in the stratigraphic section that were not well connected to the units stressed by pumping. The best hydraulic connection to the pumped wells was indicated by large drawdown in observation wells that penetrate the water-bearing unit encountered below 400 feet below land surface in wells NP–21 and NP–87. The hydraulic connection between wells NP–21 (or NP–87) and observation wells in the southern area of ground-water contamination near the BAE Systems facility is good because the observation wells probably penetrate this water-bearing unit. A 3-dimensional, finite-difference, groundwater- flow model was used to simulate flow paths and areas contributing recharge to wells for current (2000) conditions of pumping in the Colmar area and for hypothetical situations of pumping suggested by the U.S. Environmental Protection Agency that might be used for remediation. Simulations indicate that under current conditions, ground water in the northern area of contamination near the former Stabilus facility moves to the northwest and discharges mostly to West Branch Neshaminy Creek; in the southern area of contamination near BAE Systems facility, ground water probably moves west and discharges to a tributary of West Branch Neshaminy Creek near well NP–21. Model simulations indicate that if NP–21 or NP–87 are pumped at 400 gallons per minute, groundwater recharge is likely captured from the southern area of contamination, but ground-water recharge from the northern area of contamination is less likely to be captured by the pumping. Simulations also indicate that pumping of a new recovery well near BAE Systems facility at 8 gallons per minute and two new recovery wells near the former Stabilus facility at a total of about 30 gallons per minute probably would capture most of the ground-water recharge in the areas where contamination is greatest.

Water-Resources Investigations Report↗

USGS1997

Hydrogeology and ground-water quality of confined aquifers in buried valleys in Rock County, Minnesota and Minnehaha County, South Dakota

Confined glacial and bedrock aquifers are present within Quaternary and Cretaceous deposits that fill buried valleys incised in the Sioux Quartzite surface in Rock County, in southwestern Minnesota and Minnehaha County, South Dakota. This report describes the areal extent, thickness, water-bearing characteristics, water-supply potential, and water-quality characteristics of confined aquifers within buriedvalley deposits in Rock County. Hydrogeologic units present within buried-valley deposits in Rock County include unconfined and confined drift aquifers, undifferentiated Cretaceous aquifers, the Split Rock Creek aquifer, and interbedded confining units. The undifferentiated Cretaceous aquifers consist of sandstone layers within interbedded claystone and siltstone overlying the Split Rock Creek Formation or Sioux Quartzite. The Split Rock Creek Formation consisting of sand units (comprising the Split Rock Creek aquifer) and interbedded layers of siltstone and claystone, is present in buried valleys incised in the Sioux Quartzite surface in southern and possibly northeastern Rock County, Minnesota. Confined drift aquifers with thicknesses greater than 5 feet were penetrated in 6 of 10 test holes. Thicknesses of the confined drift aquifers in Rock County range from at least 2 to greater than 32 feet. Estimated horizontal hydraulic conductivity for a confined drift aquifer derived from specific-capacity information from one domestic well log was 73 feet per day. No major (thickness greater than 5 feet) undifferentiated Cretaceous aquifers were penetrated in 10 test holes. Thicknesses of the undifferentiated Cretaceous aquifers compiled from the geologic logs for four domestic wells ranged from at least 7 feet to greater than 46 feet. Estimated horizontal hydraulic conductivity for an undifferentiated Cretaceous aquifer derived from specific-capacity information from one domestic well log was 55 feet per day. Cumulative sand thicknesses for the Split Rock Creek aquifer in 10 test holes ranged from zero to 128.5 feet in 2 to 6 layers. The largest cumulative sand thicknesses were penetrated near the southern margin of the Sioux Quartzite high in northern Rock County and in an east-west trending buried valley (Brandon Embayment) entering Rock County from Minnehaha County, South Dakota. These comparatively large cumulative sand thicknesses are probably due to a high-energy depositional environment. Estimated horizontal hydraulic conductivities for the Split Rock Creek aquifer in Rock County derived from analysis of three slug tests were 0.1, 0.2, and 1 foot per day. The corresponding aquifer transmissivities, calculated as the horizontal hydraulic conductivity multiplied by the cumulative sand thickness, were 3, 16, and 130 feet squared per day. The greatest horizontal hydraulic conductivity and transmissivity estimates were for a site near the southern margin of the Sioux Quartzite high. The watersupply potential of the Split Rock Creek aquifer in Rock County is generally limited by the low transmissivity of the aquifer due to the fineness of the aquifer material (generally very fine- to fine-grained sand). Recharge to the Split Rock Creek aquifer is thought to be derived primarily from hydraulic connection to the Sioux Quartzite aquifer as infiltration of precipitation moves through the fractures and joints of the Sioux Quartzite to the Split Rock Creek aquifer. The regional directions of flow in the aquifer are to the south away from the Sioux Quartzite high and to the west in the Brandon Embayment in Minnehaha County and its east-west trending extension into Rock County. The predominant ions in water from two wells screened in confined drift aquifers in Rock County were calcium and bicarbonate and in water from a third well were calcium and sulfate. The predominant ions in water from one well screened in an undifferentiated Cretaceous aquifer in Rock County were calcium and bicarbonate and in water from a second well were calcium and sulfate. The predominant ions in water from two wells screened in the Split Rock Creek aquifer in Rock County were calcium and bicarbonate and in water from a third well were calcium and sulfate.

Minnesota, South Dakota↗

USGS1987

An evaluation of the bedrock aquifer system in northeastern Wisconsin

Ground water is a major source of water in northeastern Wisconsin. The lower Fox River valley, located between Lake Winnebago and Green Bay in northeastern Wisconsin, is the second largest population center in Wisconsin. By 1957, ground-water withdrawals had lowered the potentiometric surface of the aquifer system as much as 440 feet below prepumping levels. With the exception of the city of Green Bay, which converted from ground water to surface water (Lake Michigan) for their municipal water supply in 1957, ground-water withdrawals have continually increased. The report evaluates the bedrock aquifer system in northeastern Wisconsin and describes how the flow regimes in the system have been altered due to ground-water withdrawals. A three-dimensional finite-difference groundwater flow model was used to aid in evaluation of the regional flow system. In order to simplify the study of the aquifer system, the geologic units were grouped into eight geohydrologic units consisting of four aquifers and four confining beds. The aquifers are the more permeable sand and gravel layers in the surficial deposits (aquifer 4), Devonian dolomite-Silurian dolomite (aquifer 3), St. Peter Sandstone- Prairie du Chien Group-Jordan Sandstone Member of the Trempealeau Formation (aquifer 2), and the Galesville Sandstone-Eau Claire Sandstone-Mount Simon Sandstone (aquifer 1). The confining beds are the less permeable silts and clays in the surficial deposits (confining bed 4), Maquoketa Shale-Galena Dolomite-Decorah Shale-Platteville Formation (confining bed 3), St. Lawrence Member of the Trempealeau Formation-Franconia Sandstone (confining bed 2), and the Precambrian crystalline rock (confining bed 1). The following aquifer and confining-bed characteristics were determined to represent the aquifer system of northeastern Wisconsin and were used in the development of the model. Aquifer 4 acts as an upper boundary of the bedrock aquifer system. The hydraulic conductivity of aquifer 3 was 7.9 feet per day and the storage coefficient was estimated to be 0.01. Transmissivity input values to the model for aquifer 2 are based on hydraulic conductivities ranging from 3 to 8 feet per day. The storage coefficient for aquifer 2 was 0.0002. The transmissivity input values to the model for aquifer 1 are based on hydraulic conductivities ranging from 2.5 to 8 feet per day and the storage coefficient was 0.0002. Confining bed 4 acts as an upper confining unit for the underlying bedrock aquifers. A vertical hydraulic conductivity of 0.007 foot per day was assigned to represent confining bed 4. The vertical hydraulic conductivity of confining bed 3 was assigned values of 0.0001 to 0.000004 foot per day. A value of 0.00001 foot per day was used as the vertical hydraulic conductivity for confining bed 2. Confining bed 1 is a lower boundary of the system and was not modeled. Model simulations indicate that, by 1914, ground-water withdrawals from the aquifer system had already impacted the study area. Pumping in the Green Bay metropolitan area had lowered the potentiometric heads in aquifer 1 by 69 feet and in aquifer 2 by 55 feet. Model simulations indicate that, by 1981, ground-water withdrawals have caused a cone of depression centered in the city of De Pere area. The influence of the cone affects almost the entire study area and has significantly altered the horizontal and vertical flow regimes in the aquifer system. In 1981, computed drawdowns below the prepumping potentiometric surface of aquifer 1 range from 0 feet on the western side of the study area to 330 feet in the center of the cone of depression. In aquifer 2, the computed drawdown ranges from 0 feet on the western side of the study area to 253 feet in the center of the cone.

Wisconsin↗

USGS2000

Water-quality assessment of part of the Upper Mississippi River Basin, Minnesota and Wisconsin: Trace elements in streambed sediment and fish livers, 1995-96

Trace elements were analyzed in streambed sediment and fish livers in part of the Upper Mississippi River Basin as part of the U.S. Geological Survey’s National Water-Quality Assessment Program. The purpose of this report was to describe the occurrence and distribution of trace elements, describe the relations of concentrations measured to natural and anthropogenic factors, and describe any relation between concentrations in streambed sediment and fish livers. The study unit included the part of the Upper Mississippi River Basin from the river’s source in northern Minnesota to the outlet of Lake Pepin, a natural lake on the river located near Red Wing, Minnesota. Streambed sediment samples were collected from 27 sites located throughout the study unit, and fish were obtained from 25 sites. The occurrence and distribution of trace elements in streambed sediment were related to land use and the composition of surficial glacial deposits covering the study unit. Concentrations of antimony, arsenic, cadmium, copper, lead, mercury, nickel, and zinc in streambed sediment were primarily related to urban land use. Concentrations of these elements generally were greatest in streambed sediment collected at sites within or near urban areas in the study unit. The greatest concentrations of most of these elements were measured in streambed sediment obtained from Shingle Creek. Lead concentrations in streambed sediment Shingle Creek increased in the downstream direction. This pattern probably reflects the past use of leaded gasoline, pesticides, or paints. Cadmium concentrations in sediment from the Mississippi River were greatest at Nininger, Minnesota and in Lake Pepin. This pattern suggested that inputs of cadmium into the river were from the TCMA. Arsenic concentrations were greatest in streambed sediment collected from Cedar Creek, Shingle Creek, and the Vermillion River. Increased arsenic and iron concentrations in sediment from Cedar Creek, the Vermillion River, and the most upstream site on Shingle Creek suggested a local source of sulfide minerals or preferential sorption of arsenic to streambed sediment. The greatest concentrations of mercury were measured in streambed sediment collected from the Mississippi River at Grand Rapids and Minneapolis, Minnesota; Shingle Creek at 46th Street in Minneapolis, Minnesota; the Namekagon River above Spring Lake Creek near Hayward, Wisconsin; the St. Croix River at Hudson, Wisconsin; and the Vermillion River near Empire, Minnesota. In fish livers, all of the trace elements analyzed were detected except antimony, beryllium, cobalt, and uranium. Trace element concentrations in fish livers generally did not show any pronounced patterns. Ranges for concentrations of arsenic, cadmium, chromium, copper, lead, mercury, nickel, selenium, and zinc were similar to those measured in 20 other NAWQA studies across the United States. Cadmium concentrations in fish livers were moderately correlated to fish length and weight. There were no relations between trace element concentrations in fish livers and streambed sediment.

Minnesota, Wisconsin↗

USGS1996

Sources and loads of nutrients in the South Platte River, Colorado and Nebraska, 1994-95

The South Platte River Basin was one of 20 river basins selected in 1991 for investigation as part of the U.S. Geological Survey's National Water- Quality Assessment (NAWQA) Program. Nationwide, nutrients have been identified as one of the primary nationwide water-quality concerns and are of particular interest in the South Platte River Basin where nutrient concentrations are large compared to concentrations in other NAWQA river basins. This report presents estimates of the magnitude of nutrient-source inputs to the South Platte River Basin, describes nutrient concen- trations and loads in the South Platte River during different seasons, and presents comparisons of nutrient inputs to instream nutrient loads. Annual nutrient inputs to the basin were estimated to be 306,000 tons of nitrogen and 41,000 tons of phosphorus. The principal nutrient sources were wastewater-treatment plants, fertilizer and manure applications, and atmospheric deposition. To characterize nutrient concentrations and loads in the South Platte River during different seasons, five nutrient synoptic samplings were conducted during 1994 and 1995. Upstream from Denver, Colorado, during April 1994 and January 1995, total nitrogen concentrations were less than 2 milligrams per liter (mg/L), and total phosphorus concentrations were less than 0.2 mg/L. The water in the river at this point was derived mostly from forested land in the mountains west of Denver. Total nutrient concentrations increased through the Denver metropolitan area, and concentration peaks occurred just downstream from each of Denver's largest wastewater-treatment plants with maximum concentrations of 13.6 mg/L total nitrogen and 2.4 mg/L total phosphorus. Nutrient concen- concentrations generally decreased downstream from Denver. Upstream from Denver during April 1994 and January 1995, total nitrogen loads were less than 1,000 pounds per day (lb/d), and total phosphorus loads were less than 125 lb/d. Total nutrient loads increased through the Denver metropolitan area, and load peaks occurred just downstream from each of Denver's largest wastewater-treatment plants, with a maximum load of 14,000 lb/d total nitrogen and 2,300 lb/d total phosphorus. In April 1994, nutrient loads generally decreased from Henderson, Colorado, to North Platte, Nebraska. In January 1995, however, nutrient loads increased from Henderson to Kersey, Colorado (maximum loads of 31,000 lb/d total nitrogen and 3,000 lb/d total phosphorus), and then decreased from Kersey to North Platte. Seasonal nutrient loads primarily were dependent on streamflow. Total nitrogen loads were largest in June 1994 and January 1995 when streamflows also were largest. During June, streamflow was large, but nitrogen concentrations were small, which indicated that snowmelt runoff diluted the available supply of nitrogen. Total phosphorus loads were largest in June, when streamflow and phosphorus concentrations were large, which indicated an additional source of phosphorus during snowmelt runoff. Streamflow along the South Platte River was smallest in April and August 1994, and nutrient loads also were smallest during these months. The downstream pattern for nutrient loads did not vary much by season. Loads were large at Henderson, decreased between Henderson and Kersey, and usually were largest at Kersey. The magnitude of the decrease in loads between Henderson and Kersey varied between synoptics and was dependent on the amount of water removed by irrigation ditches. Nutrient loads leaving the basin were very small compared to the estimated total nutrient inputs to the basin. Streamflow balances indicated that the South Platte River is a gaining river throughout much of its length; streamflow-balance residuals were as large as 15 cubic feet per second per mile. Nutrient-load balances indicated that increases in river nitrate loads were, in some places, due to nitrification and, elsewhere, were due to the influx of nitrate-enriched ground water to

Water-Resources Investigations Report↗

USGS2000

Regional evaluation of evapotranspiration in the Everglades

Nine sites in the Florida Everglades were selected and instrumented for collection of data necessary for evapotranspiration-determination using the Bowen-ratio energy-budget method. The sites were selected to represent the sawgrass or cattail marshes, wet prairie, and open-water areas that constitute most of the natural Everglades system. At each site, measurements necessary for evapotranspiration (ET) calculation and modeling were automatically made and stored on-site at 15- or 30-minute intervals. Data collected included air temperature and humidity at two heights, wind speed and direction, incoming solar radiation, net solar radiation, water level and temperature, soil moisture content, soil temperature, soil heat flux, and rainfall. Data summarized in this report were collected from January 1996 through December 1997, and the development of site-specific and regional models of ET for this period is described. Latent heat flux is the energy flux density equivalent of the ET rate. Modified Priestley-Taylor models of latent heat flux as a function of selected independent variables were developed at each site. These models were used to fill in periods of missing latent heat flux measurement, and to develop regional models of the entire Everglades region. The regional models may be used to estimate ET in wet prairie, sawgrass or cattail marsh, and open-water portions of the natural Everglades system. The models are not applicable to forested areas or to the brackish areas adjacent to Florida Bay. Two types of regional models were developed. One type of model uses measurements of available energy at a site, together with incoming solar energy and water depth, to estimate hourly ET. This available-energy model requires site data for net radiation, water heat storage, and soil heat flux, as well as data for incoming solar radiation and water depth. The other type of model requires only incoming solar energy, air temperature, and water depth data to provide estimates of hourly ET. The second model thus uses data that are more readily available than the data required for the available-energy model. Computed ET mean annual totals for all nine sites for the 1996-97 period ranged from 42.4 inches per year at a site where the water level is below land surface for several months each year to 57.4 inches per year at an open-water site with no emergent vegetation. Although the density of photosynthetically-active plant leaves has been shown to relate directly to ET in some studies, it does not appear to relate directly to ET in the Everglades, based on comparison of annual ET data with leaf-area index, defined as the Normalized Difference Vegetation Index (NDVI), data from satellite imagery. NDVI and ET appear to be inversely related in the Everglades. The greatest ET rates occurred at open-water sites where the NDVI data indicated the lowest leaf-area index. Among the remaining vegetated sites, there is no clear relation between ET and NDVI, though the highest ET rate corresponded to the lowest NDVI and one of the lowest ET rates corresponded to the highest NDVI value. The variation in ET follows a seasonal pattern, with lowest monthly ET totals occurring in December through February, and highest ET occurring in May through August. The greatest range in monthly ET among all nine sites for the 2-year period occurred at site 3: from 1.81 inches in December 1997 to 6.84 inches in July 1996. A study to compare the Bowen-ratio/energy balance method of ET measurement with the eddy-correlation method was done at one site from June 22, 1998, through September 28, 1998. This comparison indicated that both methods gave comparable values of the Bowen ratio, but there was a considerable difference in available energy measured by the two methods. The mean of all 30-minute measured turbulent heat fluxes from the eddy-correlation apparatus for June 22 through September 29, 1998, was 137.4 watts per square meter, and the mean of the corresponding measured energy was 163.6 watts per square meter, or about 20 percent greater. The disagreement in mean energy fluxes measured by the two methods is problematical and is not fully understood. Although the difference seems to be related to friction velocity, and is practically non-existent at values of friction velocity greater than 0.3 meter per second, the "correctness" of either method cannot be determined with the data available.

Florida↗

USGS2002

Standard errors of annual discharge and change in reservoir content data from selected stations in the lower Colorado River streamflow-gaging station network, 1995-99

The Bureau of Reclamation is currently (1995–2001) testing the Lower Colorado River Accounting System as a method to estimate the consumptive use of Colorado River water by diverters from Hoover Dam to Mexico. Consumptive use is estimated in the Lower Colorado River Accounting System method, in part, on the basis of the annual discharge or annual change in reservoir contents, as well as the variance of estimate of the annual discharge or the annual change in reservoir contents at several surface-water gaging stations in the lower Colorado River stream-gaging network. The standard error and the variance of estimate were determined for the annual discharge at 14 streamflow-gaging stations and for the annual change in content at 2 reservoir-content gaging stations used in the Lower Colorado River Accounting System for calendar years 1995–99. The standard error of the annual discharge was determined by using modifications to an existing method that assumes that the uncertainty in the discharge-rating shift is the main source of uncertainty in computed discharges and that the discharge-rating shift behaves as a first-order Markovian process. The method uses Kalman filtering of a first-order Markovian process as a statistical analogy to computing streamflow with a shifted discharge rating. Temporally unbiased residuals from a discharge rating are used as a surrogate for the actual shifts used to compute discharge. The standard error of the annual discharge is determined by using Kalman-filter theory and estimates of four parameters: (1) the measurement variance of the discharge measurements used to determine the discharge-rating shift, (2) the process variance of the discharge-rating residuals, (3) the serial correlation of the discharge-rating residuals, and (4) the frequency of the discharge measurements. The existing methodology was improved by estimating the measurement variance from a semivariogram of the discharge-rating residuals, rather than on the basis of empirically derived error estimates for discharge measurements. The process variance and serial correlation of the discharge-rating residuals are estimated from the semivariogram, rather than a variogram, of the discharge-rating residuals. The empirically derived estimates are based on characteristics of the discharge measurements such as number of depth and velocity observation sections, type of current meter, and bed material composition and stability. Measurement variance determined from the semivariograms was site specific and is therefore considered a better estimate than measurement variance determined from the empirically-derived estimates. The method of estimating the standard error of the annual discharge requires the assumption of unbiased discharge-rating residuals, and for this reason, the standard errors presented in this report only represent the random error in the annual discharge data. Estimates of the standard error of the annual change in reservoir content were determined on the basis of the reservoir-surface area and the standard error of reservoir-stage readings. The standard error of the annual discharge, as a percentage, ranged from 0.11 percent for the All- American Canal near Imperial Dam in 1998 to 12.3 percent for the Colorado River below Imperial Dam in 1996. The standard error of the annual discharge was less than 2 percent for all 5 years for 11 of the 14 streamflow-gaging stations. In terms of flow volume, the standard error of the annual discharge ranged from 97 acre-feet for the Mittry Lake Diversions in 1995 to 77,000 acre-feet for the Colorado River at the northerly international boundary with Mexico in 1998. In general, the standard error of the annual discharge, as a percentage, was smallest at streamflow-gaging stations on the main stem of the Colorado River; however, the standard error of the annual discharge in acre-feet was largest at these stations because of the large annual discharge on the main stem. The standard error of the annual change in content for the two reservoirs ranged from 1,590 acre-feet for Lake Havasu in 1996 to 2,790 acre-feet for Lake Mohave in 1995. The variance of estimate of the annual discharge for a streamflow-gaging station can be reduced by making additional discharge measurements; either by increasing the number of discharge measurements made per site visit, or by increasing the frequency of site visits. Measurement error can be reduced by using the average shift for two or more discharge measurements made during a site visit. For a streamflow-gaging station where measurement error is much greater than process error and the serial correlation of the discharge-rating residuals is high, an improved gaging strategy would involve making multiple discharge measurements per site visit. In contrast, for a streamflow-gaging station where process error is much greater than measurement error and the serial correlation of discharge-rating residuals is low, the gaging strategy would consist of several single discharge-measurement site visits. For a given operating cost or for a given variance of estimate of the annual discharge at a streamflow-gaging station, the optimal site-visit and discharge-measurement strategy can be determined, providing that the travel costs as well as the measurement variance, process variance, and serial correlation of discharge-rating residuals are known.

Arizona;California↗

USGS1995

Surface-water-quality assessment of the lower Kansas River basin, Kansas and Nebraska: Dissolved oxygen and Escherichia coli bacteria in streams during low flow, July 1988 through July 1989

The 15,300-square-mile lower Kansas River Basin in Kansas and Nebraska was investigated, as one of the pilot study units of the U.S. Geological Survey's National Water-Quality Assessment (NAWQA) Program, to address a variety of water-quality issues. This report describes sanitary quality of streams as defined by concentrations of dissolved oxygen (DO) and densities of a fecal-indicator bacterium, Escherichia coli (E. coli). Sixty-one surface-water sampling sites were chosen for this investigation. Synoptic surveys were conducted in July 1988, November 1988, March 1989, and May 1989 to define the concentrations and diel and seasonal variability in concentrations of DO. Synoptic surveys were conducted in July 1988 and July 1989 to define densities of E. coli. Ancillary data included measurements of specific conductance, pH, water temperature. barometric pressure, and concentrations of nutrients, total organic carbon, chlorophyll, and suspended sediment. Surveys were conducted during stable-flow, dry-weather conditions. During the July 1988 synoptic survey for DO, emphasis was placed on the measurement of DO under maximum stress (high water temperature, low streamflow, and predawn conditions). Of 31 sites sampled just before dawn, 5 had DO concentrations less than the 5.0-milligrams-perliter, l-day minimum warmwater criterion for early life stages as established by the U.S. Environmental Protection Agency (USEPA), and 4 of these 5 sites had concentrations less than the 3.0-milligrams-per-liter criterion for all other life stages. For all four synoptic surveys, a total of 392 DO determinations were made, and 9 (2.3 percent) were less than water-quality criteria. Concentrations of DO less than water-quality criteria in the study unit are localized occurrences and do not reflect regional differences in DO. The most severe DO deficiencies are the result of discharges from wastewater-treatment plants into small tributary streams with inadequate assimilation capacity. Algal respiratory demand in combination with reduced physical reaeration associated with extreme low flow probably also contributes to temporary, localized deficiencies. Densities of E. coli were determined at 57 surface-water sampling sites during the syn- optic survey in July 1988. Results indicate large regional differences in E. coli densities within the study unit. Densities orE. coli in water at 19 sites in the Big Blue River subbasin, exclusive of the Little Blue River subbasin, ranged from 120 to 260,000 col/100 mL (colonies per 100 milliliters), with a median density of 2,400 col/100 mL. Densities at the 11 sites in the Little Blue River ranged from 100 to 30,000 col/100 mL, with a median density of 940 col/100 mL. Densities at the 27 sites in the Kansas River subbasin ranged from less than 1 to 1,000 col/100 mL, with a median density of 88 col/100 mL. Densities at 84 percent of the sites in the Big Blue River subbasin exceeded the USEPA E. coli criterion of 576 col/100 mL for infrequently used full-body contact recreation, and 53 percent exceeded the 2,000 cot/I00 mL fecal coliform criterion for uses other than full-body contact established by the Kansas Department of Health and Environment. Densities at 73 percent of the sites in the Little Blue River subbasin exceeded the 576 col/100 mL E. coli criterion, and 36 percent exceeded the 2,000 col/100 mL fecal coliform criterion. Densities at one of the sites in the Kansas River subbasin exceeded the 576 col/100 mL E. coli criterion, and none exceeded the 2,000 col/100 mL fecal-coliform criterion. The largest densities of E. coli in the study unit were the result of discharges from municipal wastewater-treatment plants; however, densities in the Big Blue and Little Blue River subbasins were generally larger than those in the Kansas River subbasin. These larger densities in the Big Blue and Little Blue River subbasins may have been the result of irrigation return flow from fields where manure was used as a soil

Kansas, Nebraska↗

USGS2003

Main-channel slopes of selected streams in Iowa for estimation of flood-frequency discharges

This report describes a statewide study conducted to develop main-channel slope (MCS) curves for 138 selected streams in Iowa with drainage areas greater than 100 square miles. MCS values determined from the curves can be used in regression equations for estimating floodfrequency discharges. Multivariable regression equations previously developed for two of the three hydrologic regions defined for Iowa require the measurement of MCS. Main-channel slope is a difficult measurement to obtain for large streams using 1:24,000-scale topographic maps. The curves developed in this report provide a simplified method for determining MCS values for sites located along large streams in Iowa within hydrologic Regions 2 and 3. The curves were developed using MCS values quantified for 2,058 selected sites along 138 selected streams in Iowa. A geographic information system (GIS) technique and 1:24,000-scale topographic data were used to quantify MCS values for the stream sites. The sites were selected at about 5-mile intervals along the streams. River miles were quantified for each stream site using a GIS program. Data points for river-mile and MCS values were plotted and a best-fit curve was developed for each stream. An adjustment was applied to all 138 curves to compensate for differences in MCS values between manual measurements and GIS quantifications. The multivariable equations for Regions 2 and 3 were developed using manual measurements of MCS. A comparison of manual measurements and GIS quantifications of MCS indicates that manual measurements typically produce greater values of MCS compared to GIS quantifications. Median differences between manual measurements and GIS quantifications of MCS are 14.8 and 17.7 percent for Regions 2 and 3, respectively. Comparisons of percentage differences between flood-frequency discharges calculated using MCS values of manual measurements and GIS quantifications indicate that use of GIS values of MCS for Region 3 substantially underestimate flood discharges. Mean and median percentage differences for 2- to 500-year recurrence- interval flood discharges ranged from 5.0 to 5.3 and 4.3 to 4.5 percent, respectively, for Region 2 and ranged from 18.3 to 27.1 and 12.3 to 17.3 percent for Region 3. The MCS curves developed from GIS quantifications were adjusted by 14.8 percent for streams located in Region 2 and by 17.7 percent for streams located in Region 3. Comparisons of percentage differences between flood discharges calculated using MCS values of manual measurements and adjusted-GIS quantifications for Regions 2 and 3 indicate that the flood-discharge estimates are comparable. For Region 2, mean percentage differences for 2- to 500-year recurrence- interval flood discharges ranged between 0.6 and 0.8 percent and median differences were 0.0 percent. For Region 3, mean and median differences ranged between 5.4 to 8.4 and 0.0 to 0.3 percent, respectively. A list of selected stream sites presented with each curve provides information about the sites including river miles, drainage areas, the location of U.S. Geological Survey streamflowgaging stations, and the location of streams crossing hydrologic region boundaries or the Des Moines Lobe landform region boundary. Two examples are presented for determining river-mile and MCS values, and two techniques are presented for computing flood-frequency discharges.

Iowa↗

USGS1998

Geohydrology of Storage Unit III and a combined flow model of the Santa Barbara and foothill ground-water basins, Santa Barbara County, California

The city of Santa Barbara pumps most of its ground water from the Santa Barbara and Foothill ground-water basins. The Santa Barbara basin is subdivided into two storage units: Storage Unit I and Storage Unit III. The Foothill basin and Storage Unit I of the Santa Barbara basin have been studied extensively and ground-water flow models have been developed for them. In this report, the geohydrology of the Santa Barbara ground- water basin is described with a special emphasis on Storage Unit III in the southwestern part of the basin. The purposes of this study were to summarize and evaluate the geohydrology of Storage Unit III and to develop an areawide model of the Santa Barbara and Foothill basins that includes the previously unmodeled Storage Unit III. Storage Unit III is in the southwestern part of the city of Santa Barbara. It is approximately 3.5 miles long and varies in width from about 2,000 feet in the southeast to 4,000 feet in the north-west. Storage Unit III is composed of the Santa Barbara Formation and overlying alluvium. The Santa Barbara Formation (the principal aquifer) consists of Pleistocene and Pliocene(?) unconsolidated marine sand, silt, and clay, and it has a maximum saturated thickness of about 160 feet. The alluvium that overlies the Santa Barbara Formation has a maximum saturated thickness of about 140 feet. The storage unit is bounded areally by faults and low-permeability deposits and is underlain by rocks of Tertiary age. The main sources of recharge to Storage Unit III are seepage from Arroyo Burro and infiltration of precipitation. Most of the recharge occurs in the northwest part of the storage unit, and ground water flows toward the southeast along the unit's long axis. Lesser amounts of recharge may occur as subsurface flow from the Hope Ranch subbasin and as upwelling from the underlying Tertiary rocks. Discharge from Storage Unit III occurs as pumpage, flow to underground drains, underflow through alluvium in the vicinity of Arroyo Burro across the Lavigia Fault, evapotranspiration, and underflow to the Pacific Ocean. The faults that bound Storage Unit III generally are considered to be effective barriers to the flow of ground water. Interbasin ground-water flow occurs where deposits of younger alluvium along stream channels cross faults. Ground-water quality in Storage Unit III deposits varies with location and depth. Upward leakage of poor-quality water from the underlying Tertiary rocks occurs in the storage unit, and such leakage can be influenced by poor well construction or by heavy localized pumping. The highest dissolved-solids concentration (4,710 milligrams per liter) in ground water resulting from this upward leakage is found in the coastal part of the storage unit. The ground-water system was modeled as two horizontal layers. In the Foothill basin and Storage Unit I the layers are separated by a confining bed. The upper layer represents the upper producing zone and the shallow zone near the coast. The lower layer represents the lower producing zone. In general, the faults in the study area were assumed to be no-flow boundaries, except for the offshore fault that forms the southeast boundary; the southeast boundary was simulated as a general-head boundary. The Storage Unit III model was combined with the preexisting Storage Unit I and Foothill basin models, using horizontal flow barriers, to form an areawide model. The areawide model was calibrated by simulating steady-state predevelopment conditions and transient conditions for 1978-92. The nonpumping steady- state simulation was used to verify that the calibrated model yielded physically reasonable results for predevelopment conditions. The calibrated areawide model calculates water levels in Storage Unit III that are within 10 feet of measured water levels at all sites of comparison. In addition, the model adequately simulates water levels in the Storage Unit I and Foothill basin areas. A total of 33,430 acre-feet of water was pumped from the study area during the simulation period. Model results indicate that 2,833 acre-feet came from storage and 5, 332 acre-feet crossed the general-head boundary from the ocean, thus indicating that seawater intrusion could occur. A sensitivity analysis indicates that, in general, the model is most sensitive to changes in transmissivity and total recharge.

California↗