Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Estuaries”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94Linked to original sources

Preliminary analysis of cores from north San Francisco Bay, California

During the mid-to late-1800's, large quantities of tailings from hydraulic gold mining in the Sierra Nevada were deposited in San Francisco Bay (Gilbert, 1917; Jaffe et al., 1998; Capiella et al., 1999). This rapid deposition also choked river systems and deposited mercury-contaminated sediments in the rivers and Bay. Hydraulic mining was stopped in 1884 by a California Supreme Court decision. Deposition in the Bay slowed in the late 1800's and early 1900's as a result of this decrease in sediment supply (Jaffe et al., 1998; Capiella et al., 1999). During the mid-1900's, sediment supply was further reduced by water works projects (dams, diversions, etc.), creating an erosional system in the study area by the late 1900's. The re-working of these sediments poses environmental and biological concerns regarding mercury in the bay. The location of these deposits is important for understanding the health of the bay waters. In March 2000, the U.S. Geological Survey collected sediment cores in the study area to determine the location of mercury-contaminated hydraulic mining debris. The study area (Figure 1) comprises 400 km2 and consists of San Pablo Bay and Suisun Bay, both of which are part of the San Francisco Bay estuary. Grizzly Bay, a subembayment of Suisun Bay, is also part of the study area. For the purpose of this report the term Suisun Bay will be used collectively for both areas. The present channel system in Suisun Bay is composed of three channels that flow through the bay. The primary channel runs in the southern section of Suisun Bay. A smaller channel flows between Roe Island and Ryer Island. The deepest channel flows through Suisun Cutoff, north of Ryer Island, and past Grizzly Bay. All three channels join at Carquinez Strait where they continue through the southern section of San Pablo Bay, and into San Francisco Bay. The average depths in San Pablo and Suisun Bays at mean sea level are 3.7 m and 5.8 m, respectively (Smith et al., 2002).

California↗

African dust carries microbes across the ocean: are they affecting human and ecosystem health?

Atmospheric transport of dust from northwest Africa to the western Atlantic Ocean region may be responsible for a number of environmental hazards, including the demise of Caribbean corals; red tides; amphibian diseases; increased occurrence of asthma in humans; and oxygen depletion (eutrophication) in estuaries. Studies of satellite images suggest that hundreds of millions of tons of dust are trans-ported annually at relatively low altitudes across the Atlantic Ocean to the Caribbean Sea and southeastern United States. The dust emanates from the expanding Sahara/Sahel desert region in Africa and carries a wide variety of bacteria and fungi. The U.S. Geological Survey, in collaboration with the NASA/Goddard Spaceflight Center, is conducting a study to identify microbes--bacteria, fungi, viruses--transported across the Atlantic in African soil dust. Each year, millions of tons of desert dust blow off the west African coast and ride the trade winds across the ocean, affecting the entire Caribbean basin, as well as the southeastern United States. Of the dust reaching the U.S., Florida receives about 50 percent, while the rest may range as far north as Maine or as far west as Colorado. The dust storms can be tracked by satellite and take about one week to cross the Atlantic.

Open-File Report↗

A Synopsis of Technical Issues for Monitoring Sediment in Highway and Urban Runoff

Accurate and representative sediment data are critical for assessing the potential effects of highway and urban runoff on receiving waters. The U.S. Environmental Protection Agency identified sediment as the most widespread pollutant in the Nation's rivers and streams, affecting aquatic habitat, drinking water treatment processes, and recreational uses of rivers, lakes, and estuaries. Representative sediment data are also necessary for quantifying and interpreting concentrations, loads, and effects of trace elements and organic constituents associated with highway and urban runoff. Many technical issues associated with the collecting, processing, and analyzing of samples must be addressed to produce valid (useful for intended purposes), current, complete, and technically defensible data for local, regional, and national information needs. All aspects of sediment data-collection programs need to be evaluated, and adequate quality-control data must be collected and documented so that the comparability and representativeness of data obtained for highway- and urban-runoff studies may be assessed. Collection of representative samples for the measurement of sediment in highway and urban runoff involves a number of interrelated issues. Temporal and spatial variability in runoff result from a combination of factors, including volume and intensity of precipitation, rate of snowmelt, and features of the drainage basin such as area, slope, infiltration capacity, channel roughness, and storage characteristics. In small drainage basins such as those found in many highway and urban settings, automatic samplers are often the most suitable method for collecting samples of runoff for a variety of reasons. Indirect sediment-measurement methods are also useful as supplementary and(or) surrogate means for monitoring sediment in runoff. All of these methods have limitations in addition to benefits, which must be identified and quantified to produce representative data. Methods for processing raw sediment samples (including homogenization and subsampling) for subsequent analysis for total suspended solids or suspended-sediment concentration often increase variance and may introduce bias. Processing artifacts can be substantial if the methods used are not appropriate for the concentrations and particle-size distributions present in the samples collected. Analytical methods for determining sediment concentrations include the suspended-sediment concentration and the total suspended solids methods. Although the terms suspended-sediment concentration and total suspended solids are often used interchangeably to describe the total concentration of suspended solid-phase material, the analytical methods differ and can produce substantially different results. The total suspended solids method, which commonly is used to produce highway- and urban-runoff sediment data, may not be valid for studies of runoff water quality. Studies of fluvial and highway-runoff sediment data indicate that analyses of samples by the total suspended solids method tends to under represent the true sediment concentration, and that relations between total suspended solids and suspended-sediment concentration are not transferable from site to site even when grain-size distribution information is available. Total suspended solids data used to calculate suspended-sediment loads in highways and urban runoff may be fundamentally unreliable. Consequently, use of total suspended solids data may have adverse consequences for the assessment, design, and maintenance of sediment-removal best management practices. Therefore, it may be necessary to analyze water samples using the suspended-sediment concentration method. Data quality, comparability, and utility are important considerations in collection, processing, and analysis of sediment samples and interpretation of sediment data for highway- and urban-runoff studies. Results from sediment studies must be comparable and readily transf

Open-File Report↗

Hydrologic Data Collected in Small Watersheds on Mount Desert Island, Maine, 1999-2000

The US Geological Survey, in cooperation with Acadia National Park, began collecting data for two projects related to nutrient loading to coastal estuaries on Mount Desert Island in 1999. Streamflow data from 16 sites and chemical concentration data from 14 sites in 13 small watersheds on the island are presented in this report. Data were collected from January 1999 to September 2000. Continuous streamflow data from April 1, 1999 to September 30, 2000 at 3 gages in these watersheds are presented. Graphs and tables of 264 monthly streamflow and waterquality analyses from January 1999 to September 2000 at 14 monitoring stations also are presented.

Open-File Report↗

Sidescan sonar imagery and surficial geologic interpretation of the sea floor off Branford, Connecticut

The U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration (NOAA) and the Connecticut Department of Environmental Protection (CT DEP), Figure 1 - Map of Study Areahas produced detailed geologic maps of the sea floor in Long Island Sound, a major East Coast estuary surrounded by the most densely populated region of the United States. These studies have built upon cooperative research between the USGS and the State of Connecticut that was initiated in 1982. The current phase of this research program is directed toward studies of sea-floor sediment distribution, processes that control sediment distribution, nearshore environmental concerns, and the relation of benthic community structures to the sea-floor geology. Anthropogenic wastes, toxic chemicals, and changes in land-use patterns resulting from residential, commercial, and recreational development have stressed the environment of the Sound, causing degradation and potential loss of benthic habitats (Koppelman and others, 1976; Long Island Sound Study, 1994). Detailed maps of the sea floor are needed to help evaluate the extent of adverse impacts and to help wisely manage resources in the future. Therefore, in a continuing effort to better understand Long Island Sound, we are constructing and interpreting sidescan sonar mosaics (complete-coverage acoustic images of the sea floor) within specific areas of special interest (Poppe and Polloni, 1998). The mosaic presented herein, which was produced during survey H11043 by NOAA 's Atlantic Hydrographic Branch, covers approximately 41.1 km 2 of the sea floor in north-central Long Island Sound off Branford, Connecticut. Shell bed provides shelter for juvenille skate.The mosaic and its interpretation serve many purposes, including: (1) defining the geological variability of the sea floor, which is one of the primary controls of benthic habitat diversity; (2) improving our understanding of the processes that control the distribution and transport of bottom sediments and the distribution of benthic habitats and associated infaunal community structures; and (3) providing a detailed framework for future research, monitoring, and management activities. The sidescan sonar mosaic also serves as a base map for subsequent sedimentological, geochemical, and biological observations, because precise information on environmental setting is important for selection of sampling sites and for appropriate interpretation of point measurements.

Connecticut↗

Submarine ground-water discharge and its role in coastal processes and ecosystems

Submarine ground-water discharge (SGD) has recently been recognized as a phenomenon that can strongly influence coastal water and geochemical budgets and drive ecosystem change. For example, the discharge of nutrient-enriched ground water into coastal waters may contribute significantly to eutrophication and blooms of harmful algae. Similarly, the quantity of SGD can also directly affect the availability of fresh water to coastal communities, impact fragile coastal ecosystems such as estuaries and coral reefs, and influence geomorphology of shoreline features. Moore raised awareness of the global importance of SGD and much effort has been devoted to developing new tracer techniques and methods for the identification and quantification of SGD. Because the discharge of coastal ground water commonly occurs as diffuse seepage rather than focused discharge through identifiable springs, assessing SGD has remained difficult for both oceanographers and hydrologists. Through national and international research programs, Burnett, Moore, Charette, and others have developed a rigorous, systematic approach for quantifying SGD using a wide assortment of tracers and methods. Intercalibration experiments, such as those conducted in coastal waters off Australia, Brazil, and Long Island, NY, demonstrate that careful measurements can accurately quantify SGD, confirm some of the driving mechanisms (e.g. climatic and tidal forcing), and constrain the spatial and temporal scales at which these mechanisms operate. Now that approaches for rigorously quantifying SGD are becoming better established, scientists can now begin to investigate the wide variety of coastal processes affected by SGD.

Open-File Report↗

An autonomous, electromagnetic seepage meter to study coastal groundwater/surface-water exchange

The bi-directional exchange of groundwater with coastal surface waters may influence not only coastal-water and geochemical budgets, but may also impact and direct coastal ecosystem change. For example, the widespread discharge of nutrient-enriched submarine groundwater into an estuary or lagoon may contribute directly to the onset and duration of eutrophication, as well as the development of harmful algal/bacterial blooms. Most often, this submarine groundwater discharge (SGD) (defined here as a composite of meteoric, connate and sea water) occurs as hard-to-constrain diffuse seepage, rather than as focused discharge either through vent or collapse features. As a result, quantifying SGD rates has remained difficult for both oceanographers and hydrologists alike. This report describes an adaptation of an old tool, the Lee-type manual seepage meter, with a state-of-the-art electromagnetic flow meter that enables rapid, autonomous, bi-directional measurements of fluid exchange rates across the sediment/water interface. When such measurements are coupled and interpreted with surface and groundwater pressure, salinity and temperature data, as well as other complementary measurements such as excess watercolumn 222 Rn activities, then realistic groundwater/surface-water exchange rates can be obtained in dynamic coastal environments.

Open-File Report↗

Gulf of Mexico Integrated Science - Tampa Bay Study Overview

The U.S. Geological Survey's Gulf of Mexico Integrated Science - Tampa Bay Study combines the expertise of federal, state, and local partners to address some of the most pressing ecological problems of the Tampa Bay estuary. This project serves as a template for integrated research projects in other coastal ecosystems in the nation. The Tampa Bay Study focuses on the scientific needs of the Bay, as identified by resource managers.

Open-File Report↗

Gulf of Mexico integrated science - Tampa Bay study, the impact of groundwater and contaminants on Tampa Bay

Despite the recreational and economic value of coastal bays and estuaries, these ecosystems are often among our most 'troubled' natural environments. Urbanization, agriculture, mining, and shipping are just a few activities that can have a profound and lasting impact on the coastal zone. In order to maintain a healthy coastal ecosystem, it is crucial to develop reasonable management practices around expert scientific information. We still have much to learn about the quantity and quality of groundwater being discharged into Tampa Bay, Florida. We also need to improve our knowledge of a wide range of contaminants entering the bay and must be able to determine where they accumulate in seafloor sediments. Such buried contaminants can potentially be harmful to biota if they are released to the water column. U.S. Geological Survey (USGS) scientists and research partners from the University of South Florida (USF), the University of Florida (UF), and the Florida Marine Research Institute (FMRI) are mapping sources of groundwater, measuring groundwater flow into Tampa Bay, and assessing the impact of contaminants and sediments on bay water quality and ecosystem health.

Open-File Report↗

Gulf of Mexico Integrated Science - Tampa Bay Study: Examining the Impact of Urbanization on Seafloor Habitats

Seafloor habitats, such as seagrass beds, provide essential habitat for fish and marine mammals. For many years, the study of seagrass vitality has been a priority for scientists and resource managers working in Tampa Bay. Seafloor habitats are extremely sensitive to changes in water quality. Like a canary in a coal mine, seagrass can serve as an ecological indicator of estuary health. Between the 1940s and the 1970s, seagrass gradually died in Tampa Bay. This loss has been attributed to a rise in urbanization and an increase in nutrient loading into the bay. Better treatment of industrial wastewater and runoff beginning in the 1980s resulted in the continuous recovery of seagrass beds. However, in the mid-1990s, the recovery began to level off in areas where good water quality was expected to support continued seagrass recovery, demonstrating that nutrient loading may be only one factor impacting seagrass health. Researchers now are trying to determine what might be affecting the recovery of seagrass in these areas. Currently, little is understood about the effects that other aspects of urbanization and natural change, such as groundwater and sediment quality, might have on seagrass vitality. This segment of the Tampa Bay integrated science study is intended to identify, quantify, and develop models that illustrate the impact that urbanization may have on seafloor habitat distribution, health, and restoration.

Open-File Report↗

Hydratools manual version 1.0, documentation for a MATLAB ® -based post-processing package for the Sontek Hydra

The Sediment Transport Instrumentation Group (STG) at the U.S. Geological Survey (USGS) Woods Hole Science Center has a long-standing comitment to providing scientists with high quality oceanographic data. To meet this commitment, STG personnel are vigilant in checking data as well as hardware for signs of instrument malfunction. STG data sets are accompanied by processing histories to detail data processing procedures that may have modified the natural data signal while removing noise from the data. The history also allows the data to be reprocessed in the ligth of new insight into instrument function and moored conditions. This toolbox was compiled to meet these data quality commitments for data generated by Sontek Hydra systems using both ADV and PCADP probes. In the mid 1900's, the USGS Coastal and Marine Program began frequent deployments of Sontek Hydra systems in support of projects in estuaries, coastal, and continental shelf regions nationwide. Hydra data sets are large and complex in structure, and existing processing and editing tools consisted of fragments of MATLAB code written by USGS scientists to satisfy personal research needs. This code did not meet STG quality control criteria. This toolbox permits engineers and scientists to monitor data quality by: 1. processing data with interactive critical review; 2. preserving data quality indicators; 3. preserving minimally processed and partially processed versions of data sets. STG usually deploys ADV and PCADP probes configured as downward looking, mounted on bottom tripods, with the objective of measuring high-resolution near-bed currents. The velocity profiles are recorded with minimal internal data processing. Also recorded are parameters such as temperature, conductivity, optical backscatter, light transmission, and high frequency pressure. Sampling consists of high-frequency bursts(1–10 Hz) bursts of long duration (5–30 minutes) at regular and recurring intervals for a duration of 1 to 6 months. The result is very large data files, often 500 MB per Hydra, per deployment, in Sontek's compressed binary format. This section introduces the Hydratools toolbox and provides information about the history of the system's development. The USGS philosophy regarding data quality is discussed to provide an understating of the motivation for creating the system. General information about the following topics will also be discussed: hardware and software required for the system, basic processing steps, limitations of program usage, and features that are unique to the programs.

Open-File Report↗

Interpolation of reconnaissance multibeam bathymetry from north-central Long Island Sound

Introduction The U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration (NOAA) and the Connecticut Department of Environmental Protection (CT DEP), has produced detailed maps of the sea floor in Long Island Sound, a major East Coast estuary surrounded by the most densely populated region of the United States (fig. 1). The current phase of this cooperative research program is directed toward studies of sea-floor topography and its effect on the distributions of sedimentary environments and benthic communities. Because anthropogenic wastes, toxic chemicals, and changes in land-use patterns resulting from residential, commercial, and recreational development have stressed the environment of the Sound, causing degradation and potential loss of benthic habitats (Koppelman and others, 1976; Long Island Sound Study, 1994), detailed maps of the sea floor are needed to help evaluate the extent of adverse impacts and to help manage resources wisely in the future.

Connecticut, New York↗

Gulf of Mexico integrated science - Tampa Bay study - Characterization of tidal wetlands

Tidal wetlands in Tampa Bay, Florida, consist of mangrove forests and salt marshes. Wetlands buffer storm surges, provide fish and wildlife habitat, and enhance water quality through the removal of water-borne nutrients and contaminants. Substantial areas of both mangroves and salt marshes have been lost to agricultural, residential, and industrial development in this urban estuary. Wetlands researchers are characterizing the biological components of tidal wetlands and examining the physical factors such as salinity, tidal flushing, and sediment deposition that control the composition of tidal wetland habitats. Wetlands restoration is a priority of resource managers in Tampa Bay. Baseline studies such as these are needed for successful restoration planning and evaluation.

Florida↗

Wave data processing toolbox manual

Researchers routinely deploy oceanographic equipment in estuaries, coastal nearshore environments, and shelf settings. These deployments usually include tripod-mounted instruments to measure a suite of physical parameters such as currents, waves, and pressure. Instruments such as the RD Instruments Acoustic Doppler Current Profiler (ADCP(tm)), the Sontek Argonaut, and the Nortek Aquadopp(tm) Profiler (AP) can measure these parameters. The data from these instruments must be processed using proprietary software unique to each instrument to convert measurements to real physical values. These processed files are then available for dissemination and scientific evaluation. For example, the proprietary processing program used to process data from the RD Instruments ADCP for wave information is called WavesMon. Depending on the length of the deployment, WavesMon will typically produce thousands of processed data files. These files are difficult to archive and further analysis of the data becomes cumbersome. More imperative is that these files alone do not include sufficient information pertinent to that deployment (metadata), which could hinder future scientific interpretation. This open-file report describes a toolbox developed to compile, archive, and disseminate the processed wave measurement data from an RD Instruments ADCP, a Sontek Argonaut, or a Nortek AP. This toolbox will be referred to as the Wave Data Processing Toolbox. The Wave Data Processing Toolbox congregates the processed files output from the proprietary software into two NetCDF files: one file contains the statistics of the burst data and the other file contains the raw burst data (additional details described below). One important advantage of this toolbox is that it converts the data into NetCDF format. Data in NetCDF format is easy to disseminate, is portable to any computer platform, and is viewable with public-domain freely-available software. Another important advantage is that a metadata structure is embedded with the data to document pertinent information regarding the deployment and the parameters used to process the data. Using this format ensures that the relevant information about how the data was collected and converted to physical units is maintained with the actual data. EPIC-standard variable names have been utilized where appropriate. These standards, developed by the NOAA Pacific Marine Environmental Laboratory (PMEL) (http://www.pmel.noaa.gov/epic/), provide a universal vernacular allowing researchers to share data without translation.

Open-File Report↗

A Semi-Implicit, Three-Dimensional Model for Estuarine Circulation

A semi-implicit, finite-difference method for the numerical solution of the three-dimensional equations for circulation in estuaries is presented and tested. The method uses a three-time-level, leapfrog-trapezoidal scheme that is essentially second-order accurate in the spatial and temporal numerical approximations. The three-time-level scheme is shown to be preferred over a two-time-level scheme, especially for problems with strong nonlinearities. The stability of the semi-implicit scheme is free from any time-step limitation related to the terms describing vertical diffusion and the propagation of the surface gravity waves. The scheme does not rely on any form of vertical/horizontal mode-splitting to treat the vertical diffusion implicitly. At each time step, the numerical method uses a double-sweep method to transform a large number of small tridiagonal equation systems and then uses the preconditioned conjugate-gradient method to solve a single, large, five-diagonal equation system for the water surface elevation. The governing equations for the multi-level scheme are prepared in a conservative form by integrating them over the height of each horizontal layer. The layer-integrated volumetric transports replace velocities as the dependent variables so that the depth-integrated continuity equation that is used in the solution for the water surface elevation is linear. Volumetric transports are computed explicitly from the momentum equations. The resulting method is mass conservative, efficient, and numerically accurate.

Open-File Report↗

Submarine Hydrogeological Data from Cape Cod National Seashore

In order to test hypotheses about ground water flow under and into estuaries and the Atlantic Ocean, geophysical surveys, geophysical probing, submarine ground-water sampling, and sediment coring were conducted by U.S. Geological Survey (USGS) scientists at Cape Cod National Seashore (CCNS) in Massachusetts from 2004 through 2006. This USGS Open-File Report presents the data collected as a result of these field efforts.

Open-File Report↗

Surficial sediment character of the Louisiana offshore continental shelf region: A GIS compilation

The Louisiana coastal zone, comprising the Mississippi River delta plain stretching nearly 400 km from Sabine Pass at the Texas border east to the Chandeleur Islands at the Mississippi border, represents one of North America’s most important coastal ecosystems in terms of natural resources, human infrastructure, and cultural heritage. At the same time, this region has the highest rates of coastal erosion and wetland loss in the Nation due to a complex combination of natural processes and anthropogenic actions over the past century. Comparison of historical maps dating back to 1855 and recent aerial photography show the Louisiana coast undergoing net erosion at highly variable rates. Rates have increased significantly during the past several decades. Earlier published statewide average shoreline erosion rates were >6 m/yr; rates have increased recently to >10 m/yr. The increase is attributable to collective action of storms, rapid subsidence, and pervasive man-made alterations of the rivers and the coast. In response to the dramatic landloss, regional-scale restoration plans are being developed by a partnership of federal and state agencies for the delta plain that have the objectives of maintaining the barrier islands, reducing wetland loss, and enhancing the natural sediment delivery processes. There is growing awareness that the sustainability of coastal Louisiana's natural resources and human infrastructure depends on the successful restoration of natural geologic processes. Critical to the long term success of restoration is scientific understanding of the geologic history and processes of the coastal zone region, including interactions between the rivers, wetlands, coast, and inner shelf. A variety of geophysical studies and mapping of Late Quaternary sedimentary framework and coastal processes by U.S. Geological Survey and other scientists during the past 50 years document that the Louisiana delta plain is the product of a complex history of cyclic delta switching by the Mississippi River and its distributaries over the past ~10,000 years that resulted in laterally overlapping deltaic depocenters. The interactions among riverine, coastal, and inner shelf processes have been superimposed on the Holocene transgression resulting in distinctive landforms and sedimentary sequences. Four Holocene shelf-phase delta complexes have been identified using seismic reflection data and vibracores. Each delta complex is bounded by transgressive surfaces. Following each cycle of deposition and abandonment, the delta lobes undergo regional subsidence and marine reworking that forms transgressive coastal systems and barrier islands. Ultimately, the distal end of each of the abandoned delta lobes is marked by submerged marine sand bodies representing drowned barriers. These sand bodies (e.g. Ship Shoal, Outer Shoal, Trinity Shoal, Tiger Shoal, St. Bernard Shoal) offer the largest volumes and highest quality sand for beach nourishment and shoreline and wetlands restoration. These four large sand shoals on inner continental shelf, representing the reworked remnants of former prograded deltaic headlands that existed on the continental shelf at lower sea level, were generated in the retreat path of the Mississippi River delta plain during the Holocene transgression. Penland and others (1989) have shown these sand bodies represent former shoreline positions associated with lower still stands in sea level. Short periods of rapid relative sea-level rise led to the transgressive submergence of the shorelines which today can be recognized at the -10 m to -20 m isobaths on the Louisiana continental shelf. Trinity Shoal and Ship Shoal represent the -10 m middle-to-late Holocene shoreline trend, whereas Outer Shoal and the St. Bernard Shoals define the -20 m early Holocene shoreline trend (Penland and others, 1989). Collectively, these sand shoals constitute a large volume of high quality sandy sediment potentially suitable for barrier island nourishment and coastal restoration. The USGS has actively supported coastal and wetlands geologic research for the past two decades in partnership with universities (e.g., Louisiana State University, University of New Orleans), state agencies (e.g. Louisiana Geological Survey, Louisiana Department of Natural Resources), and private organizations (Williams and others, 1992a,b; Williams and Cichon, 1993; List and others, 1994). These studies have focused on regional-scale mapping of coastal and wetland change and developing a better understanding of the processes that cause coastal erosion and wetlands loss, particularly the rapid deterioration of Louisiana's barrier islands, estuaries, and wetlands environments. With a better understanding of these processes, the ability to model and predict erosion and wetlands loss will improve. More accurate predictions will, in turn, allow for proper management of coastal resources. Improved predictions will also allow for better assessments of the utility of different restoration alternatives.

Louisiana↗

Surficial geology in central Narragansett Bay, Rhode Island: interpretations of sidescan sonar and multibeam bathymetry

The United States Geological Survey (USGS) is working cooperatively with the National Oceanic and Atmospheric Association (NOAA) to interpret the surficial geology in estuaries along the coast of the northeastern United States. The purpose of our present study is to determine the distributions of surficial sediments and sedimentary environments in two areas of Narragansett Bay, Rhode Island, using sidescan sonar imagery, high-resolution bathymetry, and sediment data. This study provides a framework for future studies on topics such as benthic habitats and oceanographic processes that control the transport and distribution of bottom sediments. This study mapped two separate areas totalling about 33 km² One area lies in West Passage between Plum Point, Quonset Point and Conanicut Island; the other area lies in East Passage around Dyer Island and extends south of Prudence Island.

Rhode Island↗