Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal of Water Process Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,711 records · Page 93Linked to original sources
USGS2026

Ductile and brittle Rio Grande Rift deformation in Oligocene granite records a two-stage rift history in southern Colorado

The timing and nature of early deformation in the Rio Grande Rift remains poorly constrained. We present evidence for the earliest structural signature of rift extension in the Sangre de Cristo Range, southern Colorado, based on new geologic mapping, structural analysis, rock magnetic data, and thermochronology. These analyses focus on the ~30.0 Ma granite of Chokecherry Canyon, which hosts discrete low-angle mylonitic shear zones and a distributed, gently SW-dipping protomylonitic fabric. Incremental stretching axes, stretching lineations, and Kmax magnetic lineations plunge gently WSW. Quartz microstructures and crystallographic orientations indicate dominantly coaxial strain in the protomylonite and general shear in the discrete shear zones. Quartz c-axis opening-angle thermometry suggests deformation at ~420–540°C. Thermal modeling of ⁴⁰Ar/³⁹Ar K-feldspar data indicates rapid post magmatic cooling below the brittle–plastic transition, supporting shear-zone formation immediately after emplacement. Slow cooling from ~20–13 Ma was followed by renewed rapid cooling at ~13 Ma, interpreted as the onset of extensional exhumation along the Sangre de Cristo Fault System. These results show that extension in the northern Rio Grande Rift was active by ~30 Ma, earlier than previously recognized. We propose a two-stage model for northern Rio Grande Rift evolution: Stage I (30–23 Ma) records ENE–WSW extension localized in low-angle mylonitic shear zones associated with mid-crustal intrusions; Stage II (≤18 Ma) reflects brittle high-angle normal faulting, focused exhumation, and rift narrowing. Stage I magmatism and deformation along the western range front likely established crustal weaknesses that guided later fault development.

Colorado↗
USGS2024

Telecommunications fiber for sensing earthquake aftershocks: Progress and hurdles

Aftershocks offer valuable clues to earthquake behavior. The challenge: quickly deploying sensors to capture the early details of earthquake ruptures within the zone of aftershocks. Telecommunication fibers might be an answer, providing denser networks in otherwise difficult areas, potentially faster than traditional methods.

Conference Paper↗
USGS2025

Preventing overfitting when using tree-based methods for mapping hydrothermal favorability

Ensemble tree-based algorithms are robust tools for estimating sparsely distributed resources with non-linear dependencies (e.g., hydrothermal systems). These algorithms naturally accommodate the threshold conditions necessary to enable and support hydrothermal systems (e.g., having sufficient heat and permeability) and are simpler than many other non-linear machine learning strategies (e.g., artificial neural networks), which is an advantage when working with few labeled examples from which to learn. In previous work, we used eXtreme Gradient Boosting (XGBoost) to produce regional prediction and uncertainty maps of hydrothermal favorability; however, recent studies suggest that, even when properly applied, XGBoost has some risk of overfitting when there are few labeled examples from which to learn. To evaluate overfitting when constructing hydrothermal favorability maps with tree-based methods, we compare XGBoost with Extremely Randomized Trees (ExtraTrees), another ensemble tree-based algorithm that has the potential to underfit when using few labeled examples. We hold all other modeling parameters constant, resulting in two contrasting favorability maps of conventional geothermal resources for the Great Basin. Our results indicate that ExtraTrees demonstrably reduces overfitting compared with XGBoost. After considering overall performance, we conclude that ExtraTrees provides a more suitable modeling approach than XGBoost for the purposes of conventional hydrothermal resource assessments.

Conference Paper↗
USGS2026

A practical framework for identifying genetic subpopulations and ESUs: Insights for IUCN assessments and broader management

Species conservation assessments evaluate extinction risk, and recovery potential, advancing species persistence through guiding resource prioritization and planning. Assessment frameworks, including the International Union for Conservation of Nature Red List and Green Status of Species, typically focus on species as a whole. Importantly, they do not routinely account for genetically distinct units or do not have standardized methods of unit delineation. This limits the representation of genetically distinct components, including adaptive genetic diversity that underpins long-term resilience and recovery. Incorporating standardized within-species units like subpopulations and Evolutionarily Significant Units (ESUs) into species assessments could help address this oversight. However, identifying and delineating such units remain challenging, particularly when molecular data are limited. Here, we propose a flexible framework that integrates molecular and non-molecular evidence to identify both subpopulations and ESUs across taxa, providing a practical tool to incorporate within-species diversity into conservation assessments.

BioScience↗
USGS2024

Reduced injection rates and shallower depths mitigated induced seismicity in Oklahoma

The proximity of wastewater disposal to the Precambrian basement is a critical factor influencing induced earthquake rates in the Central United States, but the impact of reducing injection depths has not been widely demonstrated. Beginning in 2015, state regulatory efforts in Oklahoma and Kansas mandated that wells injecting into the lower Arbuckle Group, a basal sedimentary unit, be backfilled with cement (i.e. “plugged back”) so that they inject into shallower formations. This plug back activity gives us a unique opportunity to investigate the relationship between injection depth and induced seismicity rate. To evaluate the impact that decreased injection rates and plug backs had on the seismicity rates, we create a suite of rate-state earthquake models. Observed seismicity rates are best fit when only lower Arbuckle volumes are considered, suggesting the lower Arbuckle injectors were primarily responsible for the seismicity and that plug backs were effective at isolating the injected volumes to shallower formations. Our models demonstrate that if these wells had not been plugged back, seismicity rates would be multiple times larger than they are today. We find that the combination of well plug backs and injection volume decreases can be effective strategies for reducing induced seismicity rates.

Oklahoma↗
USGS2026

Comparative crop yield forecasting using satellite-derived biophysical and agro-climatic predictors in Sub-Saharan Africa

Timely and accurate crop yield forecasting is central to food security early warning systems, particularly in climate-vulnerable regions. While operational forecasting frameworks commonly rely on precipitation and vegetation indices such as NDVI, their ability to provide actionable lead time remains limited. Here, we evaluate the added value of satellite-derived biophysical Essential Climate Variables (ECVs): Leaf Area Index (LAI) and Fraction of Photosynthetically Active Radiation (FAPAR), for forecasting millet yield in Burkina Faso (BF) and maize yield in South Africa (ZA) and Malawi (MW). Using Random Forest models, we quantify forecast skill across the growing season at both national and sub-national scales. Results show that LAI and FAPAR provide effective forecast lead times of approximately 4 months in BF, 2 months in ZA, and up to 6 months in MW relative to harvest. At peak performance, Mean Absolute Percentage Error (MAPE) reaches 19.8% (LAI) and 23.8% (FAPAR) in BF, 12.0% and 9.8% in ZA, and 21.8% and 20.8% in MW, respectively. Across countries, biophysical parameters often outperform NDVI and precipitation, particularly in arid and semi-arid regions. At the sub-national level, LAI and FAPAR enable classification of administrative units into high and moderate-skill forecast units, revealing strong spatial heterogeneity linked to crop dominance. However, forecast skill declines where the target crop is not the dominant type, highlighting an important limitation for operational deployment. Overall, the findings suggest that satellite-derived biophysical parameters can provide earlier and more spatially resolved yield signals than commonly used predictors, with potential to improve the timeliness and effectiveness of food security early warning systems.

Remote Sensing Applications: Society and Environme↗
USGS2025

USGS addresses needs for lithium calibration and quality control materials for pLIBS analysis

Lithium (Li) is a globally important commodity used for energy storage, national defense, human health, and advanced technologies. Lithium resource development requires identifying deposits with elevated concentrations and optimal mineralogy, typically associated with select clays and pegmatites. Lithium is a light, highly reactive alkali metal with low atomic mass that is difficult to detect and quantify using conventional portable geochemical techniques such as X-ray fluorescence (XRF). However, portable laser-induced breakdown spectroscopy (pLIBS) is a powerful analytical technique for lithium exploration due to its ability to analyze solids quickly with minimal preparation. The expanded utility of pLIBS is hampered by the lack of matrix-matched calibration and quality control (QC) materials. The United States Geological Survey (USGS) has developed in-house lithium calibration and QC materials for lithium in clay and pegmatite matrices to address this limitation. We present the workflow and implementation of a custom-built matrix specific calibration on a SciAps Z-300 pLIBS, using proprietary Profile Builder software. The implementation of the custom calibration and quality control standards enables us to collect semiquantitative results directly from the pLIBS while in the field. Ultimately, this calibration has improved confidence in sample selection and collection in the field, providing more efficient site characterization.

Conference Paper↗
USGS2026

A diatom-based quantitative sea-ice proxy for the Bering and Chukchi seas

Sea ice affects Earth's climate system on both regional and global scales. Its incorporation into climate can be used to achieve more accurate predictions of future climate. However, instrumental records of sea-ice concentration do not extend earlier than 1978. In an effort to extend this record, we constructed a proxy using the generalized additive model based on relative abundances of five easy-to-identify diatom species found in sediment samples across the Bering and Chukchi seas. Here we present the first quantitative diatom-based sea-ice proxy developed for Beringia. The developed proxy has been applied to two sediment cores in the Bering Sea ranging from 0 to 25.7 ka (HLY0204 51JPC) and 369 to 430 ka (IODP Exp 323 Site U1345) and one in the Chukchi Sea ranging from 2.7 to 10 ka (HLY0204 24JPC). The obtained reconstructions of sea-ice concentrations are similar, but not identical to previously published qualitative and nearby records based on other proxies. Because our results are quantitative, they can be incorporated into regional climate models. The proxy is publicly available as an R Shiny application (app) and can be applied to any diatom count from marine sediments in the region.

Bering Sea, Chukchi Sea↗
USGS2024

GRAPES: Earthquake early warning by passing seismic vectors through the grapevine

Estimating an earthquake's magnitude and location may not be necessary to predict shaking in real time; instead, wavefield-based approaches predict shaking with few assumptions about the seismic source. Here, we introduce GRAph Prediction of Earthquake Shaking (GRAPES), a deep learning model trained to characterize and propagate earthquake shaking across a seismic network. We show that GRAPES’ internal activations, which we call “seismic vectors”, correspond to the arrival of distinct seismic phases. GRAPES builds upon recent deep learning models applied to earthquake early warning by allowing for continuous ground motion prediction with seismic networks of all sizes. While trained on earthquakes recorded in Japan, we show that GRAPES, without modification, outperforms the ShakeAlert earthquake early warning system on the 2019 M7.1 Ridgecrest, CA earthquake.

Shimane/HiroshimaPrefectures↗
USGS2024

Field observations and logs from the Rose Hip trench exposure across a north-facing scarp within the Seattle Fault Zone, southern Bainbridge Island, Washington

The Seattle Fault Zone is an approximately 70-km-long, east-west-trending zone of south-dipping blind reverse faults within the Puget lowland region in Washington. Because of the proximity, the Seattle Fault Zone poses a significant earthquake hazard to the Puget sound and Seattle metropolitan regions. We present preliminary mapping and trench-site information from a paleoseismic investigation across a newly identified active fault scarp located within the hanging wall of the Seattle Fault Zone on southern Bainbridge Island, Washington. The trench exposed monoclinally folded Miocene bedrock, fractured and faulted glacial-related deposits, and laminated lacustrine deposits capped by slope-derived colluvium. The observations from this investigation record late Pleistocene to Holocene north-vergent folding and faulting along this new fault scarp.

Washington↗
USGS2026

Special issue “The 2024 M7.6 Noto Peninsula earthquake and seismic swarm”

The 2024 Mw7.5 (M JMA 7.6) Noto Peninsula earthquake struck the Noto Peninsula, central Japan on January 1, 2024, causing widespread damage. This Mw7.5 mainshock, together with the prolonged seismic swarm that persisted in the northeastern Noto Peninsula since the end of 2020, of which the largest event was the 2023 M JMA 6.5 earthquake, constitutes one of the most significant seismic sequences in Japan in recent decades. The sequence provides a rare opportunity to investigate the complex interplay among swarm activity, fluid migration, fault geometry and distribution, and the preparatory conditions required for a large inland crustal earthquake. Motivated by this scientific context, this special issue brings together studies examining the sequence from diverse disciplinary perspectives, incorporating seismic, geodetic, and tsunami-related observations and modelling.

Noto Peninsula↗
USGS2025

Simulating human behavior under earthquake early warning

Earthquakes are a rapid-onset hazard where advance planning and learning plays a key role in mitigating injuries and death to individuals. Recent advances in earthquake detection have resulted in the development of earthquake early warning (EEW) systems. These systems can provide advance warning to predetermined geographic regions that an earthquake is in progress, which may result in individuals receiving warning seconds before significant shaking is felt at their location. This additional time could allow individuals to take more effective protective actions during the immediate disaster. To demonstrate this, we created an agent-based simulation of a basic apartment that allowed us to randomly and repeatedly simulate an individual receiving and responding to an EEW message. The results of our preliminary simulation show that, in our study environment, earthquake early warning alerts have the potential to allow for sufficient time for individuals to take protective actions.

Washington↗
USGS2025

Updating regional‐scale geospatial liquefaction models with locally available geotechnical data

We present a method to update the geospatial liquefaction model used by the U.S. Geological Survey’s near‐real‐time ground failure product with subsurface geotechnical data. The geospatial model estimates liquefaction probability from peak ground velocity (via ShakeMap) and geospatial susceptibility proxies. In many regions, additional information relevant to constraining liquefaction likelihood is also available, including surface geology maps and subsurface geotechnical measurements. There is currently no mechanism to use these data in the ground failure product liquefaction model, even though these data could provide more precise constraints on spatial variations in the lithologic character of the soil (surface geology) and direct measurements of the subsurface mechanical properties that affect liquefaction occurrence and severity (geotechnical measurements). In this study, we develop a method to integrate these data with the geospatial model and assess how these data can improve regional‐scale predictions. We develop a Bayesian updating framework and apply it to the 1989 magnitude 6.9 Loma Prieta, California, earthquake, for which mapped observations are available to evaluate performance. We constrain the Bayesian framework with 373 Northern California cone penetration tests and liquefaction susceptibility classes based on the mapped surface geology. This Bayesian model incorporates geotechnical information into the geospatial model and more accurately predicts liquefaction occurrences than the geospatial model, while sacrificing less accuracy in terms of predicting the absence of liquefaction than the geotechnical model. In future applications, this approach could be adapted to update other geospatial models using locally available subsurface data.

California↗
USGS2025

Extreme plate boundary localization promotes shallow earthquake slip at the Japan Trench

The 2011 Mw9.1 Tohoku-oki earthquake is exceptional among great earthquakes for having peak slip of ~50-70 m on the shallowest portion of the plate boundary megathrust. International Ocean Discovery Program Expedition 405 drilled multiple holes through the megathrust in the large slip region and at a Pacific Plate input site. The megathrust preferentially develops at the top or base of the pelagic clay in the input section where pronounced contrasts in physical properties are present. This results in a narrow, weak fault located at a major mechanical contact between frontal prism mud and subducted clay. Localization imposed by the input section enhances the tendency for shallow seismic slip, showing the Japan Trench may be more susceptible to ruptures with large shallow slip than margins without weak clays.

Japan Trench↗
USGS2026

Key minerals in energy transmission

The electrical grid relies on minerals with unique properties to transform, transmit, and convert electricity. Transmission needs are growing—to support the expansion of data centers and link diverse energy resources into the grid. This expansion will require greater quantities of minerals. Although some minerals are produced in the United States, the United States relies on imports for others. This infographic shows the key minerals that support energy transmission, and how reliant the United States is on imports for these minerals.

General Information Product↗
USGS2026

Geochemical disequilibrium at the brittle-ductile transition

We investigate the microtextural, microchemical, and isotopic effects of late-stage ductile deformation in quartzite mylonites and kyanite–muscovite–quartz veins from the Raft River shear zone (Utah). Quartz microstructures record pervasive disequilibrium, expressed by unannealed features including undulatory extinction, deformation lamellae, and poorly defined fabrics, typical of waning deformation in shear zones. Microchemical disequilibrium is best preserved in kyanite quartzites, where CL-zoned kyanite records repeated fractures, overgrowth, and mineral precipitation, and in muscovite from muscovite-poor quartzite mylonites that shows minor-element zoning consistent with syn-deformational overgrowth on detrital cores. In contrast, muscovite from muscovite-rich kyanite quartzites exhibits minimal chemical zoning. These microchemical variations correlate with 40 Ar/ 39 Ar age systematics. Chemically zoned muscovite preserves variable single-step ages, including ∼150 Ma ages, reflecting retention of detrital cores. In contrast, syndeformational muscovite consistently yields Miocene ages, indicating recrystallization and new growth below argon closure temperatures that reset inherited isotopic signatures. Similar trends are observed in quartzite mylonites, where increasing quartz recrystallization and stronger crystallographic preferred orientations occur toward deeper structural levels. Together, these observations indicate increasing retrograde deformation and recrystallization with depth in the Raft River shear zone and demonstrate that strain-driven recrystallization exerts a first-order control on muscovite ages. We suggest that apparent thermochronologic gradients in retrograde shear zones may reflect recrystallization gradients rather than temperature gradients. Where cooling limits the thermal driving force for recrystallization, isotopic relics are preserved, and local deformation and fluid availability control re-equilibration. Consequently, isotopic disequilibrium—particularly in the 40 Ar/ 39 Ar system—may be the rule rather than the exception of retrograde tectonic environments.

Idaho, Utah↗
USGS2025

Megafaunal community structure on ferromanganese and phosphorite hardgrounds in the Southern California Borderland

The Southern California Borderland (SCB) is a topographically complex region on the active continental margin that hosts varied hardground habitats, including ferromanganese (FeMn) crusts and phosphorites, marine minerals being considered for resource extraction. The SCB is influenced by seasonal upwelling and terrestrial inputs, and has a well-defined oxygen-minimum zone (OMZ). We analyzed megafaunal community composition, density, and diversity across 41 ROV video transects at 10 SCB hard substrate sites spanning depth (378–2765 m), temperature (1.79–7.96 °C), and oxygen (3.91–105.67 μM) gradients, with varying rock types (FeMn crusts, phosphorites, other rocks). We counted 32,426 individuals representing 146 unique taxa over a total area of 21,935 m 2 . Echinodermata contributed 48 % of the total abundance; Cnidaria 24 %; Porifera 13 %; Annelida 6 %; Arthropoda 6 %; Chordata 2 %; Mollusca, Foraminifera, and Hemichordata <1 %. Megafauna communities showed clear heterogeneity, with density, diversity, and community composition varying among transects within sites and across sites. Rock type recorded no influence on megafaunal density, but habitats that included FeMn crusts had higher diversity and distinct taxonomic composition. Location, depth, and oxygen were the most important variables explaining variance among megafaunal communities, with distinct communities formed at deeper depths and within the OMZ. This study provides baseline information about the megafauna inhabiting SCB hardgrounds, particularly those associated with minerals considered for their resource potential. It extends existing documentation of such communities to greater depths, reveals increased representation of sponges and corals below 1000 m, and highlights the variability within and among deep-sea megafaunal communities, offering context for informed policy decisions.

Southern California borderland↗
USGS2026

Beaver dam analogs as nature-based solutions to mitigate snowpack loss in northern New Mexico

Reductions in snow have left many streams in northern New Mexico dry or with very low flows during the summer. Base flow, defined as the contribution of groundwater to streamflow, can sustain streamflow during the summer and during drought conditions. Beaver dam analogs can be used to “slow the flow,” or increase the infiltration of rain-based runoff to replenish shallow groundwater reservoirs and increase base flow and potentially increase summertime streamflow.

New Mexico↗