Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Interpretation”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93Linked to original sources
USGS2019

Joint 3-D tomographic imaging of Vp, Vs and Vp/Vs and hypocenter relocation at Sinabung volcano, Indonesia from November to December 2013

We conducted travel time tomography using P- and S-wave arrival times of volcanic-tectonic (VT) events that occurred between November and December 2013 to determine the three-dimensional (3D) seismic velocity structure (Vp, Vs, and Vp/Vs) beneath Sinabung volcano, Indonesia in order to delineate geological subsurface structure and to enhance our understanding of the volcanism itself. This was a time period when phreatic explosions became phreatomagmatic and then magma migrated to the surface forming a summit lava dome. We used 4846 VT events with 16,138 P- and 16,138 S-wave arrival time phases recorded by 6 stations for the tomographic inversion. The relocated VTs collapse into three clusters at depths from the surface to sea level, from 2 to 4 km below sea level, and from 5 to 8.5 km below sea level. The tomographic inversion results show three prominent regions of high Vp/Vs (~ 1.8) beneath Sinabung volcano at depths consistent with the relocated earthquake clusters. We interpret these anomalies as intrusives associated with previous eruptions and possibly surrounding the magma conduit, which we cannot resolve with this study. One anomalous region might contain partial melt, at sea level and below the eventual eruption site at the summit. Our results are important for the interpretation of a conceptual model of the “plumbing system” of this hazardous volcano.

Sinabung Volcano↗
USGS2019

The Miocene Atastra Creek sinter (Bodie Hills volcanic field, California and Nevada): 4D evolution of a geomorphically intact siliceous hot spring deposit

The Atastra Creek siliceous hot spring deposit, or sinter, occurs in the Paramount-Bald Peak alteration zone, due north of the Bodie precious metals mining district in the Miocene Bodie Hills volcanic field, California and Nevada, U.S.A. Distinctive features include its geomorphically intact geyser vent mounds, the presence of growth-fault-stepped sinter terraces that developed westward along a NNW trending fault, and atypical Hg, Sb and As concentrations. High-temperature (>75 °C), subaerial, proximal apron sinter occurs in two settings – (1) radiating botryoidal geyserite in vent mounds and (2) bedded geyserite (columnar, nodular, size-sorted geyser eggs) intercalated with mid- to low-temperature (<60 °C), middle to distal apron terrace sinter. The active geyser vent mounds migrated from south to north across the apron terrace through time. A newly recognized, visually striking type of sinter – termed silica infiltrate herein – formed directly beneath the subaerial geyserite deposits. It is characterized by mainly parallel, thin, irregular beds of white silica with narrow borders of dark blue-gray silica, as well as swirly to globular white silica, all chaotically linked together by silica ‘necks’ and ‘bridges’. The silica infiltrate permeates the pre-existing sinter, and is interpreted to represent super-heated fluid injections into the immediately overlying geyser vent mounds and pools. The adjacent sinter sheets preserve fluid-flow directions of warm-water channels that traversed the discharge apron, including microbial streamer fabric and wavy laminated sinter with flattened bubbles. More distal sinter textures are recorded by rimmed terracettes with mammillated and palisade microbial fabrics and rare, warm pool-related stromatolites. However, plants are absent, probably due to the high metalloids, in particular As. Post-depositional events include an inferred hydrothermal eruption breccia and an interpreted drop in the water table accompanied by incursion of steam acid condensate, as evidenced by pervasive hydrothermal alteration of the Atastra Creek deposits. Hence, the well-exposed sedimentary facies distributions, well-preserved geomorphology, and stratigraphic and structural relationships together allow an unusually complete, paleoenvironmental reconstruction of the Atastra Creek paleohydrothermal deposit.

Journal of Volcanology and Geothermal Research↗
USGS2020

Post-1978 tumescence at Long Valley Caldera, California: A geophysical perspective

Long Valley Caldera has been restless since at least 1978. Prominent symptoms of this unrest include earthquake swarms and tumescence (inflation) centered on the resurgent dome. Over the years, interpretations of physical processes underlying this unrest have varied considerably. Results from a collection of geophysical studies infer the presence and/or active intrusion of magma in the crust. Geologic evidence, however, does not support recent magmatic activity in the caldera, leading to an interpretation that the caldera volcanic system is moribund, and the current unrest is a result of second boiling (aqueous fluids released during crystallization of the rhyolitic magma that produced the Bishop Tuff). Here, we examine the collective constraints provided by geophysical studies over the past four decades. Although the current geophysical evidence does not conclusively discriminate between unrest driven by recent crustal magmatic intrusion versus second boiling, it does provide evidence that a large volume of partial melt persists within the mid- and lower crust. This implies that the Long Valley Caldera system as a whole is long-lived, and the magma reservoir remains at least partially molten. In the shallow crust, the possibility of small pockets of magma remains. In aggregate, the data suggest commonality with other large, long-lived silicic caldera systems, such as Yellowstone and Campi Flegrei. Although the possibility of eruption within Long Valley Caldera remains unlikely, the geophysical evidence argues that Long Valley has an active magmatic system at depth and we must retain the possibility of eruptive hazards.

California↗
USGS2022

Olivine and glass chemistry record cycles of plumbing system recovery after summit collapse events at Kīlauea Volcano, Hawai‘i

The eruptive activity of Kīlauea Volcano (Hawai‘i) in the past 2500 years has alternated between centuries-long periods dominated either by explosive or effusive eruptions. The onset of explosive periods appears to be marked by caldera collapse events at the volcano's summit accompanied by draining of Kīlauea's magmatic plumbing system. Here we leverage >1800 olivine forsterite (Fo) contents, >900 glass MgO contents, and estimated magma supply rates from the past six centuries to describe the relationships between summit collapse and the composition of erupted material. On a first order basis, the major element chemistry of the centuries-long eruptive periods largely originates from fundamental differences between fractional crystallization of shallowly stored magmas during high-supply effusive-dominated periods versus little evolution of mafic recharge magmas during low-supply explosive-dominated periods. The modern effusive period (1820s-present) is dominated by relatively evolved olivine forsterite contents (Fo81–82) for Kīlauea, which is interpreted to reflect a buffered crustal reservoir system in which shallow storage and fractional crystallization control the composition of magmas. In contrast, olivine crystals from the explosive Keanakāko‘i Tephra (1500 - early 1800s C.E.) are dominated by higher olivine forsterite contents (Fo89) which are interpreted to reflect more primitive compositions, are correlated with glass MgO compositions extending to high values (e.g.,11.0 wt%), and show signs of magma mixing (zoned olivine, bimodal Fo populations). These signatures reflect a disrupted reservoir system in which high-MgO recharge melts mix with melts left over from draining of the shallow (<5 km) magma plumbing. Superimposed on these explosive-effusive periods are three decades- to centuries long periods of progressively evolving olivine and glass compositions. Eruptions that occur after caldera collapse in ~1500C.E. and smaller scale crater collapse events in 1790 (inferred) and 1924 have heterogeneous olivine populations dominated by ≥Fo88 and typically high MgO glasses. These compositions reflect inefficient mixing of stored and primitive recharge magmas after the disruption of the shallow plumbing system. After these collapses, olivine Fo and glass MgO subsequently evolve to <Fo82 and <7.0 wt% compositions, reflecting the recovery of the crustal plumbing system to an end-member system state characterized by efficient mixing of recharge and stored magmas that serve to buffer the shallow magma reservoirs. These evolved signatures suggest that a mature and buffered reservoir system may be a key condition for significant disruptions of volcanic plumbing systems. Plumbing system recovery is slower following large-scale caldera collapse (hundreds of years) compared to recovery following smaller crater collapse (tens of years), which may be modulated by differences in magma supply rates. Following the 2018 crater collapse olivine populations have high-Fo but glasses are low MgO, suggesting that this collapse might have disrupted shallow magma pathways but not strongly impacted the reservoir(s). Ultimately, olivine and glass major element chemistry record the impacts of caldera and smaller but significant summit crater collapse events at Kīlauea and could be used to provide a framework for better characterizing long-term volcano evolution in Hawai‘i and shield volcanoes elsewhere.

Hawaii↗
USGS2025

Identifying precursors and tracking pulses of magma ascent in multidisciplinary data during the 2018–2023 phreatomagmatic eruption at Semisopochnoi Island, Alaska

The 2018–2023 phreatomagmatic eruptions at Semisopochnoi Island, Alaska produced abundant long-period (LP) seismicity, harmonic and broadband tremor, and explosion signals over several well-monitored periods of eruption and quiescence. The corresponding dataset provides an excellent opportunity to investigate precursory and syn -eruptive geophysical signals of long-lived phreatomagmatic eruptions using multiparameter observations. We generated explosion and LP event catalogs through novel implementations of the REDPy ( Hotovec-Ellis, 2024 ) repeating event detector in mid-2021 following a network upgrade and the onset of a new phase of the eruption. The hundreds of detected explosions show a high degree of infrasound waveform similarity over more than a year, indicating a repeating source mechanism likely associated with explosive magma-water interaction. The seismic LP catalog shows that events began over a month prior to renewed explosive activity at the beginning of August 2021, and that lower frequency index (FI) LPs were generated in the week prior to the onset of explosions. We applied a recently developed machine learning tool (VOISS-Net, Tan et al., 2024 ) to catalog abundant broadband and harmonic seismic tremor recorded before and during the renewed explosive activity, along with LPs and explosions. The tremor catalogs complement the LP and explosion catalogs by filling out the seismic sequence with the dominant signal types. Together, these catalogs reveal a seismic sequence of renewed unrest that started with several weeks of LP events, followed by LPs with lower FI values and harmonic tremor in the days prior to explosive activity, and finally the onset of discrete explosions and broadband eruption tremor. We interpret this sequence as the ascent of a new pulse of magma that first interacted with the hydrothermal/groundwater system to produce LPs, followed by harmonic tremor, and that ultimately drove explosive magma-water interactions and periods of continuous ash emissions. The 2021 seismic sequence, in combination with long-term records of satellite SO 2 emissions, deformation from interferometric synthetic aperture radar (InSAR) analysis, ash sample analysis, infrasound, and volcano tectonic seismicity, allows us to interpret the entire 9-year period of unrest and eruption that began with an intrusion and earthquake swarm in 2014.

Alaska↗
USGS2011

U-Pb SHRIMP-RG zircon ages and Nd signature of lower Paleozoic rifting-related magmatism in the Variscan basement of the Eastern Pyrenees

The ages of orthogneisses exposed in massifs of the Variscan chain can determine whether they are part of a pre-Neoproterozoic basement, a Neoproterozoic, Panafrican arc, or are, in fact, lower Paleozoic, and their isotopic compositions can be used to probe the nature of their source rocks, adding to the understanding of the types, distribution, and tectonic evolution of peri-Gondwanan crystalline basement. .Using SHRIMP U-Pb zircon geochronology and Nd isotopic analysis, pre-Variscan metaigneous rocks from the Núria massif in the Eastern Pyrenean axial zone and the Guilleries massif, 70 km to the south, have been dated and their Nd signatures characterized.. All dated orthogneisses from the Núria massif have the same age within error, ~457 Ma, including the Ribes granophyre, interpreted as a subvolcanic unit within Caradocian sediments contemporaneous with granitic magmas intruded into Cambro-Ordovician sediments at deeper levels. Orthogneisses in the Guilleries massif record essentially continuous magmatic activity during the Ordovician, beginning at the Cambro-Ordovician boundary (488 ± 3 Ma) and reaching a peak in the volume of magma in the early Late Ordovician (~ 460 Ma). Metavolcanic rocks in the Guilleries massif were extruded at 452 ± 4 Ma and appear to have their intrusive equivalent in thin, deformed veins of granitic gneiss (451 ± 7 Ma) within metasedimentary rocks. In orthogneisses from both massifs, the cores of some zircons yield Neoproterozoic ages between ~ 520 and 900 Ma. The age of deposition of a pre-Late Ordovician metapelite in the Guilleries massif is bracketed by the weighted average age of the youngest detrital zircon population, 582 ± 11 Ma, and the age of cross-cutting granitic veins, 451 ± 7 Ma. Older detrital zircons populations in this metapelite include Neoproterozoic (749–610 Ma; n = 10), Neo- to Mesoproterozoic (1.04–0.86 Ga; n = 7), Paleoproterozoic (2.02–1.59 Ga; n = 5), and Neoarchean (2.74–2.58 Ga; n = 3). Nd isotopic analyses of the Núria and Guilleries orthogneisses yielded negative ε Nd values ranging between − 2.1 and − 5.2 at 450 Ma, the same as Ediacaran sediments from northwestern Iberia. We interpret these slightly negative ε Nd values as a signature of Panafrican arc rocks, mixed with an older crustal component as indicated by the inherited and detrital zircon ages we analyzed. The crustal level in which Ordovician melting occurred has not been recognized and the absence of pre-Neoproterozoic basement is a striking feature of the southern part of the Variscan Chain.

LITHOS↗
USGS2017

The role of deep-water sedimentary processes in shaping a continental margin: The Northwest Atlantic

The tectonic history of a margin dictates its general shape; however, its geomorphology is generally transformed by deep-sea sedimentary processes. The objective of this study is to show the influences of turbidity currents, contour currents and sediment mass failures on the geomorphology of the deep-water northwestern Atlantic margin (NWAM) between Blake Ridge and Hudson Trough, spanning about 32° of latitude and the shelf edge to the abyssal plain. This assessment is based on new multibeam echosounder data, global bathymetric models and sub-surface geophysical information. The deep-water NWAM is divided into four broad geomorphologic classifications based on their bathymetric shape: graded, above-grade, stepped and out-of-grade. These shapes were created as a function of the balance between sediment accumulation and removal that in turn were related to sedimentary processes and slope-accommodation. This descriptive method of classifying continental margins, while being non-interpretative, is more informative than the conventional continental shelf, slope and rise classification, and better facilitates interpretation concerning dominant sedimentary processes. Areas of the margin dominated by turbidity currents and slope by-pass developed graded slopes. If sediments did not by-pass the slope due to accommodation then an above grade or stepped slope resulted. Geostrophic currents created sedimentary bodies of a variety of forms and positions along the NWAM. Detached drifts form linear, above-grade slopes along their crests from the shelf edge to the deep basin. Plastered drifts formed stepped slope profiles. Sediment mass failure has had a variety of consequences on the margin morphology; large mass-failures created out-of-grade profiles, whereas smaller mass failures tended to remain on the slope and formed above-grade profiles at trough-mouth fans, or nearly graded profiles, such as offshore Cape Fear.

Marine Geology↗
USGS2020

Seismic stratigraphic framework of the continental shelf offshore Delmarva, U.S.A.: Implications for Mid-Atlantic Bight evolution since the Pliocene

Understanding how past coastal systems have evolved is critical to predicting future coastal change. Using over 12,000 trackline kilometers of recently collected, co-located multi-channel boomer, sparker and chirp seismic reflection profile data integrated with previously collected borehole and vibracore data, we define the upper (< 115 m below mean lower low water) seismic stratigraphic framework offshore of the Delmarva Peninsula, USA. Twelve seismic units and 11 regionally extensive unconformities (U1-U11) were mapped over 5900 km 2 of North America's Mid-Atlantic continental shelf. We interpret U3, U7, U9, U11 as transgressive ravinement surfaces, while U1,2,4,5,6,8,10 are subaerial unconformities illustrating distinct periods of lower sea-level. Based on areal distribution, stratigraphic relationships and dating results (Carbon 14 and amino acid racemization estimates) from earlier vibracore and borehole studies, we interpret the infilled channels as late Neogene and Quaternary courses of the Susquehanna, Potomac, Rappahannock, York, James rivers and tributaries, and a broad flood plain. These findings indicate that the region's geologic framework is more complex than previously thought and that Pleistocene paleochannels are abundant in the Mid-Atlantic. This study synthesizes and correlates the findings of other Atlantic Margin studies and establishes a large-scale Quaternary framework that enables more detailed stratigraphic analysis in the future. Such work has implications for inner continental shelf systems tract evolution, the relationship between antecedent geology and modern coastal systems, assessments of eustacy, glacial isostatic adjustment, and other processes and forcings that play a role in passive margin evolution.

Delaware, Maryland, Virginia↗
USGS2005

Petroleum geochemistry of oil and gas from Barbados: Implications for distribution of Cretaceous source rocks and regional petroleum prospectivity

Petroleum produced from the Barbados accretionary prism (at Woodbourne Field on Barbados) is interpreted as generated from Cretaceous marine shale deposited under normal salinity and dysoxic conditions rather than from a Tertiary source rock as previously proposed. Barbados oils correlate with some oils from eastern Venezuela and Trinidad that are positively correlated to extracts from Upper Cretaceous La Luna-like source rocks. Three distinct groups of Barbados oils are recognized based on thermal maturity, suggesting petroleum generation occurred at multiple levels within the Barbados accretionary prism. Biodegradation is the most significant process affecting Barbados oils resulting in increased sulfur content and decreased API gravity. Barbados gases are interpreted as thermogenic, having been co-generated with oil, and show mixing with biogenic gas is limited. Gas biodegradation occurred in two samples collected from shallow reservoirs at the Woodbourne Field. The presence of Cretaceous source rocks within the Barbados accretionary prism suggests that greater petroleum potential exists regionally, and perhaps further southeast along the passive margin of South America. Likewise, confirmation of a Cretaceous source rock indicates petroleum potential exists within the Barbados accretionary prism in reservoirs that are deeper than those from Woodbourne Field.

Marine and Petroleum Geology↗
USGS2009

Unique problems associated with seismic analysis of partially gas-saturated unconsolidated sediments

Gas hydrate stability conditions restrict the occurrence of gas hydrate to unconsolidated and high water-content sediments at shallow depths. Because of these host sediments properties, seismic and well log data acquired for the detection of free gas and associated gas hydrate-bearing sediments often require nonconventional analysis. For example, a conventional method of identifying free gas using the compressional/shear-wave velocity (V p /V s ) ratio at the logging frequency will not work, unless the free-gas saturations are more than about 40%. The P-wave velocity dispersion of partially gas-saturated sediments causes a problem in interpreting well log velocities and seismic data. Using the White, J.E. [1975. Computed seismic speeds and attenuation in rocks with partial gas saturation. Geophysics 40, 224-232] model for partially gas-saturated sediments, the difference between well log and seismic velocities can be reconciled. The inclusion of P-wave velocity dispersion in interpreting well log data is, therefore, essential to identify free gas and to tie surface seismic data to synthetic seismograms.

Marine and Petroleum Geology↗
USGS2011

Petroleum prospectivity of the Canada Basin, Arctic Ocean

Reconnaissance seismic reflection data indicate that Canada Basin is a >700,000 sq. km. remnant of the Amerasia Basin of the Arctic Ocean that lies south of the Alpha-Mendeleev Large Igneous Province, which was constructed across the northern part of the Amerasia Basin between about 127 and 89–83.5 Ma. Canada Basin was filled by Early Jurassic to Holocene detritus from the Beaufort–Mackenzie Deltaic System, which drains the northern third of interior North America, with sizable contributions from Alaska and Northwest Canada. The basin contains roughly 5 or 6 million cubic km of sediment. Three fourths or more of this volume generates low amplitude seismic reflections, interpreted to represent hemipelagic deposits, which contain lenses to extensive interbeds of moderate amplitude reflections interpreted to represent unconfined turbidite and amalgamated channel deposits. Extrapolation from Arctic Alaska and Northwest Canada suggests that three fourths of the section in Canada Basin is correlative with stratigraphic sequences in these areas that contain intervals of hydrocarbon source rocks. In addition, worldwide heat flow averages suggest that about two thirds of Canada Basin lies in the oil or gas windows. Structural, stratigraphic and combined structural and stratigraphic features of local to regional occurrence offer exploration targets in Canada Basin, and at least one of these contains bright spots. However, deep water (to almost 4000 m), remoteness from harbors and markets, and thick accumulations of seasonal to permanent sea ice (until its possible removal by global warming later this century) will require the discovery of very large deposits for commercial success in most parts of Canada Basin.

Conference Paper↗
USGS2020

Organic petrography of Leonardian (Wolfcamp A) mudrocks and carbonates, Midland Basin, Texas: The fate of oil-prone sedimentary organic matter in the oil window

To better understand evolution of oil-prone sedimentary organic matter to petroleum and expulsion from source rock, we evaluated organic petrographic features of Leonardian Wolfcamp A repetitive siliceous and calcareous mudrock and fine-grained carbonate lithofacies cycles occurring in the R. Ricker #1 core from Reagan County, Midland Basin, Texas. The objectives of the petrographic investigation were to estimate thermal maturity, identify organic matter types and abundances, and identify the presence or absence of migrated hydrocarbons in organic-lean carbonate layers. An integrated analytical program included geochemical screening [total organic carbon (TOC) content by LECO, programmed pyrolysis by hydrocarbon analyzer with kinetics (HAWK) including analysis of solvent-extracted samples], X-ray diffraction mineralogy, organic petrography, scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS) including correlative light and electron microscopy (CLEM), and micro-Fourier transform infrared spectroscopy (μ-FTIR) analyses of solid bitumen. The data indicate all samples are early to middle oil window thermal maturity with solid bitumen reflectance (BR o ) values of 0.55–0.86% and T max of 440–455 °C. Organic matter is predominantly solid bitumen (as identified by optical microscopy) in all lithofacies with minor contributions from inertinite. Solid bitumen abundance decreases from siliceous mudrock (TOC >3.0 wt%) to calcareous mudrock (TOC 1.0 to 3.0 wt%) to fine-grained carbonate (TOC <1.0 wt%) lithofacies. Interpretations of petrographic data suggest siliceous and calcareous mudrocks are source rock lithofacies and contain solid bitumen (with petroleum generation potential) that is residual (what remains) from conversion of an original Type II sedimentary organic matter. In turn, fine-grained carbonates are interpreted as reservoir lithofacies which contained little or no original oil-prone sedimentary organic matter and at present-day contain only a minor component of migrated solid petroleum sourced from adjacent siliceous and calcareous mudrock lithofacies. This work helps to document petroleum generation and migration processes, improve unconventional reservoir characterization and better define areas of oil window thermal maturity in an area critical to United States hydrocarbon production.

Texas↗
USGS2020

Characterization of the unconventional Tuscaloosa marine shale reservoir in southwestern Mississippi, USA: Insights from optical and SEM petrography

This study presents new optical petrography and electron microscopy data, interpreted in the context of previously published petrophysical, geochemical, and mineralogical data, to further characterize the Tuscaloosa marine shale (TMS) as an unconventional reservoir in southwestern Mississippi. The basal high resistivity zone has a higher proportion of Type II sedimentary organic matter than the overlying TMS, indicating it is more prone to oil generation. Optical petrography and electron microscopy reveal a heterogeneous clay matrix with ubiquitous pyrite grains, quartz, feldspar, glaucony, foraminifera, shell fragments, and rarer occurrences of apatite and crinoid fragments as well as liptinite, alginite, inertinite, and vitrinite. Our petrographic observations suggest that higher abundances of detrital quartz grains coupled with minimal authigenic cements result in higher porosity and permeability. However, the TMS is also more clay-rich than other unconventional shale oil and gas plays, which can impair the effectiveness of hydraulic fracture stimulation. Thin section observations reveal alternating clay and calcium carbonate laminae that are interpreted to reflect changes in sediment flux. Planktonic foraminifera indicate an overlying oxygenated water column while benthic inoceramid fragments and pervasive authigenic pyrite suggest anoxic or dysoxic bottom water conditions. Apatite fragments in thin section suggest mixing events and an influx of nutrient-rich sediments. Overall, these observations suggest that a variety of paleodepositional environments occurred in the TMS and the lithofacies diversity resulting from these small-scale depositional cycles makes it difficult to determinatively identify areas conducive to enhanced economic hydrocarbon recovery.

Mississippi, Lousianna↗
USGS2017

Origin and evolution of mineralizing fluids and exploration of the Cerro Quema Au-Cu deposit (Azuero Peninsula, Panama) from a fluid inclusion and stable isotope perspective

Cerro Quema is a high sulfidation epithermal Au-Cu deposit with a measured, indicated and inferred resource of 35.98 Mt. @ 0.77 g/t Au containing 893,600 oz. Au (including 183,930 oz. Au equiv. of Cu ore). It is characterized by a large hydrothermal alteration zone which is interpreted to represent the lithocap of a porphyry system. The innermost zone of the lithocap is constituted by vuggy quartz with advanced argillic alteration locally developed on its margin, enclosed by a well-developed zone of argillic alteration, grading to an external halo of propylitic alteration. The mineralization occurs in the form of disseminations and microveinlets of pyrite, chalcopyrite, enargite, tennantite, and trace sphalerite, crosscut by quartz, barite, pyrite, chalcopyrite, sphalerite and galena veins. Microthermometric analyses of two phase (L + V) secondary fluid inclusions in igneous quartz phenocrysts in vuggy quartz and advanced argillically altered samples indicate low temperature (140–216 °C) and low salinity (0.5–4.8 wt% NaCl eq.) fluids, with hotter and more saline fluids identified in the east half of the deposit (Cerro Quema area). Stable isotope analyses (S, O, H) were performed on mineralization and alteration minerals, including pyrite, chalcopyrite, enargite, alunite, barite, kaolinite, dickite and vuggy quartz. The range of δ 34 S of sulfides is from − 4.8 to − 12.7‰, whereas δ 34 S of sulfates range from 14.1 to 17.4‰. The estimated δ 34 S ΣS of the hydrothermal fluid is − 0.5‰. Within the advanced argillic altered zone the δ 34 S values of sulfides and sulfates are interpreted to reflect isotopic equilibrium at temperatures of ~ 240 °C. The δ 18 O values of vuggy quartz range from 9.0 to 17.5‰, and the δ 18 O values estimated for the vuggy quartz-forming fluid range from − 2.3 to 3.0‰, indicating that it precipitated from mixing of magmatic fluids with surficial fluids. The δ 18 O of kaolinite ranges from 12.7 to 18.1‰ and δD from − 103.3 to − 35.2‰, whereas the δ 18 O of dickite varies between 12.7 and 16.3‰ and δD from − 44 to − 30. Based on δ 18 O and δD, two types of kaolinite/dickite can be distinguished, a supergene type and a hypogene type. Combined, the analytical data indicate that the Cerro Quema deposit formed from magmatic-hydrothermal fluids derived from a porphyry copper-like intrusion located at depth likely towards the east of the deposit. The combination of stable isotope geochemistry and fluid inclusion analysis may provide useful exploration vectors for porphyry copper targets in the high sulfidation/lithocap environment.

Azuero Peninsula↗
USGS2017

Effects of thermal maturation and thermochemical sulfate reduction on compound-specific sulfur isotopic compositions of organosulfur compounds in Phosphoria oils from the Bighorn Basin, USA

Compound-specific sulfur isotope analysis was applied to a suite of 18 crude oils generated from the Permian Phosphoria Formation in the Bighorn Basin, western USA. These oils were generated at various levels of thermal maturity and some experienced thermochemical sulfate reduction (TSR). This is the first study to examine the effects of thermal maturation on stable sulfur isotopic compositions of individual organosulfur compounds (OSCs) in crude oil. A general trend of 34 S enrichment in all of the studied compounds with increasing thermal maturity was observed, with the δ 34 S values of alkyl-benzothiophenes (BTs) tending to be enriched in 34 S relative to those of the alkyl-dibenzothiophenes (DBTs) in lower-maturity oils. As thermal maturity increases, δ 34 S values of both BTs and DBTs become progressively heavier, but the difference in the average δ 34 S value of the BTs and DBTs (Δ 34 S BT-DBT) decreases. Differences in the isotopic response to thermal stress exhibited by these two compound classes are considered to be the result of relative differences in their thermal stabilities. TSR-altered Bighorn Basin oils have OSCs that are generally enriched in 34 S relative to non-TSR-altered oils, with the BTs being enriched in 34 S relative to the DBTs, similar to the findings of previous studies. However, several oils that were previously interpreted to have been exposed to minor TSR have Δ 34 S BT-DBT values that do not support this interpretation. The δ 34 S values of the BTs and DBTs in some of these oils suggest that they did not experience TSR, but were derived from a more thermally mature source. The heaviest δ 34 S values observed in the OSCs are enriched in 34 S by up to 10‰ relative to that of Permian anhydrite in the Bighorn Basin, suggesting that there may be an alternate or additional source of sulfate in some parts of the basin. These results indicate that the sulfur isotopic composition of OSCs in oil provides a sensitive indicator for the extent of TSR, which cannot be determined from other bulk geochemical parameters. Moreover, when combined with additional geochemical and geologic evidence, the sulfur isotopic composition of OSCs in oils can help to identify the source of sulfate for TSR alteration in petroleum reservoirs.

Montana, Wyoming↗
USGS2007

Sequence stratigraphic controls on synsedimentary cementation and preservation of dinosaur tracks: Example from the lower Cretaceous, (Upper Albian) Dakota Formation, Southeastern Nebraska, U.S.A.

A thin cemented sandstone bed in the Upper Albian Dakota Formation of southeastern Nebraska contains the first dinosaur tracks to be described from the state. Of equal importance to the tracks are stable-isotope (C, O) analyses of cements in the track bed, especially in the context of data derived from generally correlative strata (sandstones and sphaerosiderite-bearing paleosols) in the region. These data provide the framework for interpretations of paleoenvironmental conditions, as well as a novel approach to understanding mechanisms of terrestrial vertebrate track preservation. High minus-cement-porosity (> 47%) and low grain-to-grain contacts (???2.5) in the track bed indicate early (pre-compaction) lithification. Although phreatic cements dominate, the history of cementation within this stratigraphic interval is complex. Cathodoluminescence petrography reveals two distinct calcite zones in the track-bearing horizon and four cement zones in stratigraphically equivalent strata from a nearby section. The earliest calcite cements from both localities are likely coeval because they exhibit identical positive covariant trends (??18O values of - 9.89 to - 6.32??? and ??13C values of - 28.01 to - 19.33??? VPDB) and record mixing of brackish and meteoric groundwaters. All other calcite cements define meteoric calcite lines with ??18O values clustering around - 9.42??? and - 8.21??? VPDB from the track-bearing horizon, and - 7.74???, - 5.81???, and - 3.95??? VPDB from the neighboring section. Distinct meteoric sphaerosiderite lines from roughly correlative paleosols serve as a proxy for locally recharged groundwaters. Back-calculated paleogroundwater ??18O estimates from paleosol sphaerosiderites range from - 7.4 to - 4.2??? SMOW; whereas, meteoric calcite lines from the track horizon are generally more depleted. Differences in cement ??18O values record changes in paleogroundwater recharge areas over time. Early calcite cements indicate mixing of fresh and brackish groundwaters during the syndepositional lithification of the track horizon. Later calcite cements, however, indicate recharge from a larger catchment basin that extended far inland. Therefore, the cements likely record a rise and subsequent fall in relative sea level. We conclude that scrutiny of the cement isotope geochemistry of genetically significant surfaces, especially track beds, can provide new data for interpreting sea level change. ?? 2006 Elsevier B.V. All rights reserved.

Palaeogeography, Palaeoclimatology, Palaeoecology↗
USGS2008

Late Devonian glacial deposits from the eastern United States signal an end of the mid-Paleozoic warm period

A Late Devonian polymictic diamictite extends for more than 400 km from northeastern Pennsylvania across western Maryland and into east-central West Virginia. The matrix-supported, unbedded, locally sheared diamictite contains subangular to rounded clasts up to 2 m in diameter. The mostly rounded clasts are both locally derived and exotic; some exhibit striations, faceting, and polish. The diamictite commonly is overlain by laminated siltstone/mudstone facies associations (laminites). The laminites contain isolated clasts ranging in size from sand and pebbles to boulders, some of which are striated. The diamictite/laminite sequence is capped by massive, coarse-grained, pebbly sandstone that is trough cross-bedded. A stratigraphic change from red, calcic paleo-Vertisols in strata below the diamictite to non-calcic paleo-Spodosols and coal beds at and above the diamictite interval suggests that the climate became much wetter during deposition of the diamictite. The diamictite deposit is contemporaneous with regressive facies that reflect fluvial incision during the Late Devonian of the Appalachian basin. These deposits record a Late Devonian episode of climatic cooling so extreme that it produced glaciation in the Appalachian basin. Evidence for this episode of climatic cooling is preserved as the interpreted glacial deposits of diamictite, overlain by glaciolacustrine varves containing dropstones, and capped by sandstone interpreted as braided stream outwash. The Appalachian glacigenic deposits are contemporaneous with glacial deposits in South America, and suggest that Late Devonian climatic cooling was global. This period of dramatic global cooling may represent the end of the mid-Paleozoic warm interval that began in the Middle Silurian.

Pennsylvania, Maryland, West Virginia↗
USGS2023

A complex record of last interglacial sea-level history and paleozoogeography, Santa Rosa Island, Channel Islands National Park, California, USA

Studies of marine terraces and their fossils can yield important information about sea level history, tectonic uplift rates, and paleozoogeography, but some aspects of terrace history, particularly with regard to their fossil record, are not clearly understood. Marine terraces are well preserved on Santa Rosa Island, California, and the island is situated near a major marine faunal boundary. Two prominent low-elevation terraces record the ∼80 ka (marine isotope stage [MIS] 5a) and ∼120 ka (MIS 5e) high-sea stands, based on U-series dating of fossil corals and aminostratigraphic correlation to dated localities elsewhere in California and Baja California. Low uplift rates are implied by an interpretation of these ages, along with their elevations. The fossil assemblage from the ∼120 ka (2nd) terrace contains a number of northern, cool-water species, along with several southern, warm-water species, a classic example of what has been called a thermally anomalous fauna. Low uplift rates in the late Pleistocene, combined with glacial isostatic adjustment (GIA) processes, could have resulted in reoccupation of the ∼120 ka (MIS 5e), 2nd terrace during the ∼100 ka (MIS 5c) high-sea stand, explaining the mix of warm-water (∼120 ka?) and cool-water (∼100 ka?) fossils in the terrace deposits. In addition, however, sea surface temperature (SST) variability during MIS 5e may have been a contributing factor, given that Santa Rosa Island is bathed at times by the cold California Current with its upwelling and at other times is subject to El Niño warm waters, evident in the Holocene SST record. Study of an older, high-elevation marine terrace on the western part of Santa Rosa Island shows more obvious evidence of fossil mixing. Strontium isotope ages span a large range, from ∼2.3 Ma to ∼0.91 Ma. These analyses indicate an age range of ∼500 ka at one locality and ∼ 600 ka at another locality, interpreted to be due to terrace reoccupation and fossil reworking. Consideration of elevations and ages here also yield low, long-term uplift rates, which in part explains the potential for terrace reoccupation in the early Pleistocene. In addition, however, early Pleistocene glacial-interglacial cycles were of much shorter duration, linked to the ∼41 ka obliquity cycle of orbital forcing, a factor that would also enhance terrace reoccupation in regions of low uplift rate. It is likely that other Pacific Coast marine terrace localities of early Pleistocene age, in areas with low uplift rates, also have evidence of fossil mixing from these processes, an hypothesis that can be tested in future studies.

California↗