SEARCH · Geology Reports

Results for “Geological & Geophysical Surveys”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93Linked to original sources

USGS2025

Surface-wave relocation and characterization of the October 2023 tsunamigenic seismic unrest near Sofugan volcano, Izu Islands, Japan

A moderate-magnitude earthquake swarm occurred in the remote Izu Islands region of Japan between October 1 and 8, 2023. The swarm included 151 shallow earthquakes cataloged by the U.S. Geological Survey, which notably included a roughly 2.5-hr episode of 15 successive magnitude (M) < 5.5 earthquakes. Origin times were coincident with regionally recorded tsunami waves, but tsunamigenesis for moderate-magnitude earthquakes is uncommon, indicating that volcanic activity generated the ocean displacements. Leveraging a surface-wave relative relocation approach, we estimate precise epicentroid locations for the remote swarm. Final epicentroids and caldera analogs indicate a three-stage model to explain swarm activity: (a) caldera pressurization due to magma intrusion, (b) depressurization via dike propagation away from the caldera, and (c) eruption corresponding with caldera reactivation either by collapse or additional intrusion.

Sofugan volcano, Izu Islands↗

USGS1992

Geohydrologic systems in Kansas: Physical framework of the upper aquifer unit in the western interior plains aquifer system

The purpose of this Hydrologic Investigations Atlas is to provide a description of the principal geohydrologic systems in Upper Cambrian through Lower Cretaceous rocks in Kansas. This investigation was made as part of the Central Midwest Regional Aquifer-System Analysis (CMRASA). The CMRASA is one of several major investigations by the U.S. Geological Survey of regional aquifer systems in the United States. These regional investigations are designed to increase knowledge of the flow regime and hydrologic properties of major aquifer systems and to provide quantitative information for the assessment, development, and management water supplies. The CMRASA study area includes all or parts of 10 Central Midwestern States (Jorgensen and Signor, 1981), as shown on the envelope cover. This Hydrologic Investigations Atlas, which consists of a series of nine chapters, presents a description of the physical framework and the geohydrology of principal aquifers and confining systems in Kansas. Chapter D presents maps that show the areal extent, altitude and configuration of the top, and thickness of Mississippian rocks that compose the upper aquifer unit of the Western Interior Plains aquifer system in Kansas, The chapter is limited to the presentation of the physical framework of the upper aquifer unit. The interpretation of the physical framework of the upper aquifer unit is based on selected geophysical and lithologic logs and published maps of stratigraphically equivalent units. Maps indicating the thickness and the altitude and configuration of the top of the upper aquifer unit in the Western Interior Plains aquifer system have been prepared as part of a series of interrelated maps that describe the stratigraphic interval from the Precambrian basement through Lower Cretaceous rocks. A concerted effort was made to ensure that maps of each geohydrologic unit are consistent with the maps of underlying and overlying units. Chapter A of this atlas series (Wolf and others, 1990) describes the relation of principal geohydrologic systems in Kansas and presents a more detailed discussion of the methods and data used to prepare and ensure consistency among the sets of maps.

Kansas↗

USGS2006

Analytical results from samples collected during coal-bed methane exploration drilling in Caldwell Parish, Louisiana

In 2001, and 2002, the U.S. Geological Survey (USGS) and the Louisiana Geological Survey (LGS), through a Cooperative Research and Development Agreement (CRADA) with Devon SFS Operating, Inc. (Devon), participated in an exploratory drilling and coring program for coal-bed methane in north-central Louisiana. The USGS and LGS collected 25 coal core and cuttings samples from two coal-bed methane test wells that were drilled in west-central Caldwell Parish, Louisiana. The purpose of this report is to provide the results of the analytical program conducted on the USGS/LGS samples. The data generated from this project are summarized in various topical sections that include: 1. molecular and isotopic data from coal gas samples; 2. results of low-temperature ashing and X-ray analysis; 3. palynological data; 4. down-hole temperature data; 5. detailed core descriptions and selected core photographs; 6. coal physical and chemical analytical data; 7. coal gas desorption results; 8. methane and carbon dioxide coal sorption data; 9. coal petrographic results; and 10. geophysical logs.

Open-File Report↗

USGS2014

Recent investigations of Thiem's method for determining permeability of water‐bearing materials

This paper presents results obtained in an investigation of the ground-water resources of the Platte River Valley that is being conducted in cooperation between the Conservation and Survey Department of the University of Nebraska and the United States Geological Survey. Most quantitative ground-water studies are concerned with the amount of water that percolates into the discharge-area of an investigated region from the recharge-area in order to determine the amount of water that can be safely withdrawn from the discharge-area without an excessive lowering of the ground-water level. D'Arcy found that the quantity of water discharged through a column of water-bearing material was proportional t o the hydraulic gradient, the cross-sectional area, and a constant which depends upon the material. If these three factors are known, the discharge through any cross section of a water-bearing formation may be computed.

Eos, Transactions, American Geophysical Union↗

USGS1984

Evaluation of the ground-water resources of coastal Georgia; preliminary report on the data available as of July 1983

A compilation of ground-water data that have been collected for nearly 100 years in the coastal area of Georgia as part of cooperative activities between the U.S. Geological Survey and other agencies is presented in this report. The compilation of pertinent data indicates that information is available for use in the evaluation of the ground-water resources of the 13 counties of coastal Georgia. Included in this report is a fairly complete discussion of previous and ongoing investigations and monitoring networks, and an extensive list of references. Maps at 1:24,000, 1:100,000; and 1:1000,000 scales contain well locations and identifers for all wells in the Ground Water Site Inventory (GWSI) data base of the National Water Data Storage and Retrieval System (WATSTORE). Tabular summaries of selected site information from GWSI, including well identifiers and names , latitude-longitude location, depth of well, altitude of land surface, and use of water are presented. Water-use data from the National Water Use Data System, and water use for irrigation from the University of Georgia, Department of Agriculture survey , are tabulated. Also included are pertinent information on geophysical surveys and data obtained, and proposed project activities, particularly test-monitor well drilling.

Georgia↗

USGS2005

Studies of the Chesapeake Bay impact structure - Introduction and discussion

The late Eocene Chesapeake Bay impact structure on the Atlantic margin of Virginia is the largest known impact crater in the United States, and it may be the Earth's best preserved example of a large impact crater that formed on a predominantly siliciclastic continental shelf. The 85-kilometer-wide (53-milewide) crater also coincides with a region of saline ground water. It has a profound influence on ground-water quality and flow in an area of urban growth. The USGS-NASA Langley corehole at Hampton , Va., is the first in a series of new coreholes being drilled in the crater, and it is the first corehole to penetrate the entire crater-fill section and uppermost crystalline basement rock. The Langley corehole is located in the southwestern part of the crater's annular trough. A comprehensive effort to understand the crater's materials, architecture, geologic history , and formative processes, as well as its influence on ground water, includes the drilling of coreholes accompanied by high-resolution seismic-reflection and seismic-refraction surveys, audio-magnetotelluric surveys, and related multidisciplinary research. The studies of the core presented in this volume provide detailed information on the outer part of the crater, including the crystalline basement , the overlying impact -modified and impact -generated sediments (physical geology, paleontology, shocked minerals, and crystalline ejecta), and the upper Eocene to Quaternary postimpact sedimentary section (stratigraphy, paleontology, and paleoenvironments). The USGS-NASA Langley corehole has a total depth below land surface of 635.1 meters (m; 2,083.8 feet (ft)). The deepest unit in the corehole is the Neoproterozoic Langley Granite. The top of this granite at 626.3 m (2,054.7 ft) depth is overlain by 390.6 m (1,281.6 ft) of impact -modified and impact -generated siliciclastic sediments. These crater-fill materials are preserved beneath a 235.6-m-thick (773.12-ft-thick) blanket of postimpact sediments. A high-resolution seismic-reflection and seismic-refraction profile that crosses the Langley drill site is tied to the core by borehole geophysical logs, and it reveals the details of extensional collapse structures in the western annular trough. Electrical cross sections based on audio-magnetotelluric (AMT) soundings image a nearly vertical zone of high resistivity at the outer margin of the annular trough, possibly indicating fresh ground water at that location, and they show impedance trends that match the curvature of the structure . They also image the subsurface contact between conductive sediments and resistive crystalline basement , showing that the depth to crystalline basement is relatively constant in the western part of the annular trough. Chemical and isotopic data indicate that saline ground water of the Virginia inland saltwater wedge or bulge is a mixture of freshwater and seawater, and evidence for a mixing zone at the crater's outer margin supports the concept of differential flushing of residual seawater to create the bulge. Ground-water brine in the central part of the crater was produced by evaporation, and brine production from the heat of the impact is at least theoretically possible.

Chesapeake Bay↗

USGS2007

Evolving plans for the USA National Phenology Network

Phenology is the study of periodic plant and animal life cycle events, how these are influenced by seasonal and interannual variations in climate, and how they modulate the abundance, diversity, and interactions of organisms. The USA National Phenology Network (USA-NPN) is currently being organized to engage federal agencies, environmental networks and field stations, educational institutions, and citizen scientists. The first USA-NPN planning workshop was held August 2005, in Tucson, Ariz. (Betancourt et al. [2005]; http://www.uwm.edu/Dept/Geography/npn/; by 1 June 2007, also see http://www.usanpn.org). With sponsorship from the U.S. National Science Foundation, the U.S. Geological Survey (USGS), the U.S. Fish and Wildlife Service, and NASA, the second USA-NPN planning workshop was held at the University of Wisconsin-Milwaukee on 10–12 October 2006 to (1) develop lists of target species and observation protocols; (2) identify existing networks that could comprise the backbone of nationwide observations by 2008; (3) develop opportunities for education, citizen science, and outreach beginning in spring 2007; (4) design strategies for implementing the remote sensing component of USA-NPN; and (5) draft a data management and cyberinfrastructure plan.

Eos, Transactions, American Geophysical Union↗

USGS2025

Completion summary for monitor wells NRF-17 and NRF-18 at the Naval Reactors Facility, Idaho National Laboratory, Idaho

The U.S. Geological Survey (USGS)—in cooperation with the U.S. Department of Energy (DOE) for the Naval Reactors Laboratory Field Office that supports operations for the Naval Reactors Facility (NRF) located at the Idaho National Laboratory (INL)—drilled and constructed well NRF-17 (formerly borehole USGS 151) and well NRF-18 (formerly borehole USGS 152) for stratigraphic framework analyses and water-quality monitoring at the Idaho National Laboratory (INL) near the NRF, in southeastern Idaho. Borehole USGS 151 was continuously cored from about 48 to 1,070 feet (ft) below land surface (BLS); rotary drilled from approximately 1,070 to 1,720 ft BLS; and re-drilled to complete construction as a monitor well NRF-17, completed to 461 ft BLS. Borehole USGS 152 was continuously cored from approximately 19 to 1,259 ft BLS; rotary drilled from approximately 1,259 to 1,630 ft BLS; and re-drilled to complete construction as a monitor well NRF-18, completed to 450 ft BLS. Geophysical data were examined with photographed core material to record lithologic descriptions and to suggest zones where groundwater flow was anticipated. Basalt flows varied from highly fractured to dense, with high-to-low vesiculation. Well NRF-17 generally was constructed in mostly dense basalt (greater than 75 percent), and well NRF-18 was constructed in primarily fractured and (or) vesicular basalt. In well NRF-17, the well capacity is directly affected by the limited amount of fractured basalt, which serves as the primary pathway for groundwater. This effect was observed during the pumping test conducted after the well's final construction. Single-well aquifer tests were done at wells NRF-17 and NRF-18 to provide estimates of transmissivity and hydraulic conductivity after final well construction and initial well development. Estimated values of transmissivity and hydraulic conductivity for well NRF-17 were 8.81 feet squared per day (ft 2 /d) and 1.04×10 -2 feet per day (ft/d), respectively. Estimated values of transmissivity and hydraulic conductivity for well NRF-18 were 4.77×10 3 ft 2 /d and 5.61 ft/d, respectively. The NRF-17 pump test resulted in 19.41 ft of measured drawdown at a sustained average pumping rate of 3.3 gallons per minute (gal/min). The NRF-18 pump test resulted in 0.55 ft of measured drawdown at a sustained average pumping rate of 31.0 gal/min. Water-quality samples collected from the two wells were analyzed for cations, anions, metals, nutrients, volatile organic compounds, stable isotopes, and radionuclides. Water samples for select inorganic constituents showed concentrations consistent with signatures from tributary valley groundwater with influences from ephemeral surface-water recharge from the Big Lost River. Water-quality samples analyzed for stable isotopes of oxygen and hydrogen are consistent with signatures from tributary valley groundwater and surface-water recharge inputs to the aquifer. No measured water-quality results were greater than their respective maximum contaminant levels for public drinking-water supplies. Inorganic and nutrient water-quality results for well NRF-17 and well NRF-18 suggest the groundwater in this area is potentially affected by industrial wastewater disposal.

Idaho↗

USGS1983

Stratigraphic framework and distribution of lignite on Crowleys Ridge, Arkansas

The purpose of this report is to establish a stratigraphic framework of lignite beds and associated strata of Crowleys Ridge, Arkansas. Drill hole data provided by the Arkansas Geological Commission is used in the synthesis and interpretation. Areas containing lignite of potential resource value are also delineated. To illustrate the regional stratigraphic framework of Crowleys Ridge, a cross section was constructed from logs of selected oil and gas test wells, along or adjacent to the north-south trending ridge over a distance of about 115 miles. This section reveals that lignite-bearing Tertiary formations dip gently southward along the ridge. The Paleocene-Eocene Wilcox Group forms the bedrock in the northern part of the ridge and successively younger bedrock of the Eocene Claiborne and Jackson Groups is identified in the central and southern part of the ridge. Crowleys Ridge is mantled with alluvium and loess of Quaternary age, and sand and gravel beds of the Lafayette Formation of Pliocene (?) age that unconformably overlie the Paleocene and Eocene rocks. The thickness of lignite-bearing sedimentary deposits ranges from 830 feet in the north to 2,480 feet in the south. The Wilcox, Claiborne, and Jackson Groups of Paleocene and Eocene age are believed to be fluvial-deltaic in origin. The detailed vertical and horizontal stratigraphic characteristics and distribution of lignite beds in the sediments were determined by constructing seven cross sections from lithologic and geophysical logs of the lignite investigations on Crowleys Ridge by the Arkansas Geological Commission and private companies. Correlation and interpretation of the lignite-bearing strata reveal ten lignite beds of resource potential. These lignite beds range from a few inches to 9.5 ft in thickness and are assigned to stratigraphic intervals that are designated as zone 1 through 7. Zone 1 is near the middle of the Wilcox Group and zone 7 is near the middle of the overlying Claiborne Group. Some of these lignite beds are correlated over distances as much as 30 miles. Other lignite beds thin to a few inches thick and disappear within short distances. Four areas are delineated on Crowleys Ridge that contain one or more lignite beds each 2.5 feet or more thick. Strippable lignite is limited to 300 feet in this area, therefore, all holes were drilled to 300 feet or less. Chemical analyses of eight lignite samples from Crowleys Ridge are on record with the U.S. Geological Survey's National Coal Resources Data System. Two of the samples are from the Wilcox Group, and six are from the Claiborne Group, but the lignite beds from which the samples were taken are unidentified. However, the analyses are believed to be representative of the lignite within the lignite-bearing sequence. The two Wilcox samples had moisture values of 36.3 and 40.1 percent; ash, 30.5 and 20.5 percent (U.S. Bureau of Mines); sulfur content, 0.3 and 1.0 percent; and Btu values, 3,910 and 4,590 on an as received basis. The six Claiborne samples had moisture values ranging from 34.7 to 43.7 percent; ash from 11.9-28.2 percent (USBM); sulfur content, 0.3-3 percent; and Btu values, 3,400 to 5,160. U.S. Geological Survey average ash content for the eight samples was 36.22 percent, and the major oxides are SiO2 (60.75 percent), Al2O3 (15.23 percent), CaO (6.96 percent), Fe2O3 (6.65 percent), and SO3 (5.64 percent). No anomalous values were recorded for the trace element content. Lignite is not currently mined on Crowleys Ridge. It has potential for use as a fuel for direct firing of boilers to generate electricity. It also has potential for gasification to produce pipeline gas, and for liquefaction to produce fuel oil. More drilling and analyses are needed to better define the quantity and quality of lignite beds within the four significant areas with resource potential and to determine the extent of lignite beds 2.5 ft or more thick that occur in several isolated areas.

Open-File Report↗

USGS1997

Geologic studies in Alaska by the U.S. Geological Survey, 1995

This collection of 20 papers continues the annual series of U.S. Geological Survey (USGS) reports on geologic investigations in Alaska1 . Contributions cover a broad spectrum of earth science topics and report results from all parts of the State (fig. 1). USGS activities in Alaska include studies of environment and climate, hazards, resources, and geologic framework. Five papers in this volume discuss aspects of environment and climate. Environmental geochemistry of parts of southwestern and south-central Alaska is the focus of four articles; a fifth study, of emergent postglacial lake shorelines in southwestern Alaska, contributes to ongoing investigations of paleoclimate. Two papers address geologic hazards. The first assesses ground deformation in Katmai National Park at Novarupta dome, site of the largest volcanic eruption in this century, and the second evaluates earthquake risks related to the "Twin Peak fault" near Anchorage. Resources, including metallic minerals in northern, southwestern, and southeastern Alaska and coal in south-central Alaska, are discussed in four articles. Nine geologic framework studies apply a variety of techniques to a wide range of subjects throughout Alaska, including tectonics, geophysics, geochronology, bio stratigraphy, sedimentology, paleogeography, and paleomagnetism. Two bibliographies at the end of the volume list reports about Alaska in USGS publications released in 1995 and reports about Alaska by USGS authors in non-USGS publications in 1995.

Alaska↗

USGS2026

Extreme Potomac floods at Washington D.C. during the past 500 years

Washington D.C. faces one of the highest 100-year flood risks of any major city along the U.S. East Coast. In addition to storm-surge inundation during hurricanes and nor'easters, water-level observations for Washington are strongly skewed by major floods on the Potomac River. Using geologic and historic records we find new evidence for ice-jam flooding at Georgetown during the Little Ice Age, as recently as 1784, that was up to ∼2x the magnitude of the largest events of the past hundred years (1936, 1942). Over the 19th century (a) human modifications to the Potomac estuary as well as (b) increasingly heavy rainfall and (c) land-clearance in the watershed may have contributed to increasingly frequent large floods at Washington. Early surveys of the U.S. Capitol Building and other local landmarks also suggest sea level on the Potomac estuary at Washington has risen by upwards of 0.7 m (2.2 ft) since the 1790s.

Maryland, Virginia↗

USGS2014

The U. S. Geological Survey's gravity program in Washington, Idaho, Montana, and Wyoming

The following summary of the U . S . Geological Survey gravity program in Washington , Idaho , Montana , and Wyoming is one of a series of short papers that outline Geological Survey gravity projects in the western United States. The substance of this summary is a list of references of published papers on U . S . Geological Survey gravity projects in the northwestern states together with an index map (Figure 1) showing the location of the project, the approximate a real coverage reported in the publication, and the contour map given in the publication. Areas in Figure 1 are related to the References (part 2) by a number code. In addition, the gravity projects in progress are listed in Table 1, indicating the area in which the work is being done and the person in charge of the project. Capital letter relate the locations of the projects in Figure 1 to the list of projects in Table 1. No attempt has been made to indicate the areal coverage or contour interval of the projects in progress.

Washington, Idaho, Montana, Wyoming↗

USGS2014

Hydrology of limestone terrane in Schoharie County, New York

During the summer of 1946 the writer studied the ground‐water resources of Schoharie County, New York, as a part of the program of ground‐water investigation being carried on in cooperation between the United States Geological Survey and the New York State Water Power and Control Commission. Because the outcrop belt of Devonian and Upper Silurian carbonate rocks is wider in Schoharie County than in other parts of the State, the effects of solution on these formations is better displayed here than elsewhere. The conditions described below probably apply on a smaller scale to the areas to the west, where the upper formations are cut out by an unconformity, and to the east in the Helderberg area, where similar effects have been described by Goldring [see “References” at end of paper, 1935]. However, it is probable that solution in the limestones in the Hudson Valley is not comparable because of the folded condition of the rocks.

New York↗

USGS2011

Global multi-resolution terrain elevation data 2010 (GMTED2010)

In 1996, the U.S. Geological Survey (USGS) developed a global topographic elevation model designated as GTOPO30 at a horizontal resolution of 30 arc-seconds for the entire Earth. Because no single source of topographic information covered the entire land surface, GTOPO30 was derived from eight raster and vector sources that included a substantial amount of U.S. Defense Mapping Agency data. The quality of the elevation data in GTOPO30 varies widely; there are no spatially-referenced metadata, and the major topographic features such as ridgelines and valleys are not well represented. Despite its coarse resolution and limited attributes, GTOPO30 has been widely used for a variety of hydrological, climatological, and geomorphological applications as well as military applications, where a regional, continental, or global scale topographic model is required. These applications have ranged from delineating drainage networks and watersheds to using digital elevation data for the extraction of topographic structure and three-dimensional (3D) visualization exercises (Jenson and Domingue, 1988; Verdin and Greenlee, 1996; Lehner and others, 2008). Many of the fundamental geophysical processes active at the Earth's surface are controlled or strongly influenced by topography, thus the critical need for high-quality terrain data (Gesch, 1994). U.S. Department of Defense requirements for mission planning, geographic registration of remotely sensed imagery, terrain visualization, and map production are similarly dependent on global topographic data. Since the time GTOPO30 was completed, the availability of higher-quality elevation data over large geographic areas has improved markedly. New data sources include global Digital Terrain Elevation Data (DTEDRegistered) from the Shuttle Radar Topography Mission (SRTM), Canadian elevation data, and data from the Ice, Cloud, and land Elevation Satellite (ICESat). Given the widespread use of GTOPO30 and the equivalent 30-arc-second DTEDRegistered level 0, the USGS and the National Geospatial-Intelligence Agency (NGA) have collaborated to produce an enhanced replacement for GTOPO30, the Global Land One-km Base Elevation (GLOBE) model and other comparable 30-arc-second-resolution global models, using the best available data. The new model is called the Global Multi-resolution Terrain Elevation Data 2010, or GMTED2010 for short. This suite of products at three different resolutions (approximately 1,000, 500, and 250 meters) is designed to support many applications directly by providing users with generic products (for example, maximum, minimum, and median elevations) that have been derived directly from the raw input data that would not be available to the general user or would be very costly and time-consuming to produce for individual applications. The source of all the elevation data is captured in metadata for reference purposes. It is also hoped that as better data become available in the future, the GMTED2010 model will be updated.

Open-File Report↗

USGS2017

Saltwater intrusion in the Floridan aquifer system near downtown Brunswick, Georgia, 1957–2015

Introduction The Floridan aquifer system (FAS) consists of the Upper Floridan aquifer (UFA), an intervening confining unit of highly variable properties, and the Lower Floridan aquifer (LFA). The UFA and LFA are primarily composed of Paleocene- to Oligocene-age carbonate rocks that include, locally, Upper Cretaceous rocks. The FAS extends from coastal areas in southeastern South Carolina and continues southward and westward across the coastal plain of Georgia and Alabama, and underlies all of Florida. The thickness of the FAS varies from less than 100 feet (ft) in aquifer outcrop areas of South Carolina to about 1,700 ft near the city of Brunswick, Georgia. Locally, in southeastern Georgia and the Brunswick– Glynn County area, the UFA consists of an upper water-bearing zone (UWBZ) and a lower water-bearing zone (LWBZ), as identified by Wait and Gregg (1973), with aquifer test data indicating the upper zone has higher productivity than the lower zone. Near the city of Brunswick, the LFA is composed of two permeable zones: an early middle Eocene-age upper permeable zone (UPZ) and a highly permeable lower zone of limestone (LPZ) of Paleocene and Late Cretaceous age that includes a deeply buried, cavernous, saline water-bearing unit known as the Fernandina permeable zone. Maslia and Prowell (1990) inferred the presence of major northeast–southwest trending faults through the downtown Brunswick area based on structural analysis of geophysical data, northeastward elongation of the potentiometric surface of the UFA, and breaches in the local confining unit that influence the area of chloride contamination. Pronounced horizontal and vertical hydraulic head gradients, caused by pumping in the UFA, allow saline water from the FPZ to migrate upward into the UFA through this system of faults and conduits. Saltwater was first detected in the FAS in wells completed in the UFA near the southern part of the city of Brunswick in late 1957. By the 1970s, a plume of groundwater with high chloride concentrations had migrated northward toward two major industrial pumping centers, and since 1965, chloride concentrations have steadily increased in the northern part of the city. In 1978, data obtained from a 2,720-ft-deep test well (33H188) drilled south of the city showed water with a chloride concentration of 33,000 milligrams per liter (mg/L), suggesting the saltwater source was located below the UFA in the Fernandina permeable zone (FPZ) of the LFA. All U.S. Geological Survey (USGS) data collected for this study, including groundwater levels in wells and water-chemistry data, are available in the USGS National Water Information System.

Georgia↗

USGS2007

U.S. Geological Survey Georgia Water Science Center and City of Brunswick–Glynn County Cooperative Water Program— Summary of activities, July 2005 through June 2006

Since 1959, the U.S. Geological Survey has conducted a cooperative water resources program (CWP) with the City of Brunswick and Glynn County in the Brunswick, Georgia, area. Since the late 1950s, the salinity of ground water in the Upper Floridan aquifer near downtown Brunswick, Georgia, has been increasing, and its occurrence has been detected across an area of increasing size. Pumping of the Upper Floridan aquifer near downtown Brunswick has lowered water levels in the aquifer and resulted in an upward hydraulic gradient between the highly saline parts of the Lower Floridan aquifer and the normally fresh Upper Floridan aquifer. Saltwater likely enters the Upper Floridan aquifer through localized, vertically oriented conduits of relatively high permeability and moves laterally in response to the distribution of stresses within the aquifer. The Brunswick-Glynn County CWP for fiscal year 2006 includes the operation and maintenance of 12 continuous water-level recorders. In addition, water-level data were collected from 52 wells and water from 70 wells was analyzed for chloride concentration during June 2005. Geophysical logs were obtained from one well to assess whether the cause of elevated chloride concentration could be due to leaky well casing. A summary of the Georgia Department of Natural Resources, Environmental Protection Division (GaEPD) Georgia Coastal Sound Science Initiative (CSSI) activities that directly benefit the CWP-Brunswick-Glynn County is included in this report. The GaEPD CSSI is a program of scientific and feasibility studies to support development of a final strategy to protect the Upper Floridan aquifer from saltwater contamination. These data presented in this report are needed by State and local authorities to manage water resources effectively in the coastal area of Georgia.

Georgia↗

USGS2026

Geologic map of the Sierra Nevada, California and western Nevada

THE GEOLOGIC MAP OF THE SIERRA NEVADA is a core component of the Sierra Nevada Earth Science Atlas, which also includes geophysical, neotectonic, economic, and geochronologic data. The map illustrates the distribution of geologic units across the Sierra Nevada and related adjacent areas. Geologic units are grouped by type and age into three categories: Principally Paleozoic and Mesozoic metasedimentary and metavolcanic wall rocks, most of which are grouped into terranes; Paleozoic and Mesozoic plutons and intrusive suites, which intrude the wall rocks and form the core batholith of the range; and Late Cretaceous and Cenozoic sedimentary and volcanic rocks and surficial deposits that unconformably overlap the older units. Related rock units were combined and simplified for presentation at a scale of 1:400,000, as shown in the list of map units and associated correlation of map units (Plate 1B) and description of map units (Appendix A). Tectonic faulting, folding and uplift have overprinted the rocks and have strongly influenced the spatial distribution of units and the distinct morphology of the Sierra Nevada as we see it today. The Atlas is the result of collaborative work by scientists and mapmakers from the California Geological Survey and the U.S. Geological Survey. The Atlas was originally envisioned by the late geologist Warren Nokleberg (1939-2021), who contributed much to the initial geologic map compilation

California, Nevada↗

USGS1982

Atlantic continental margin of the United States

The objective of this Decade of North American Geology (D-NAG) volume will be to focus on the Mesozoic and Cenozoic evolution of the U.S. Atlantic continental margin, including the onshore coastal plain, related onshore Triassic-Jurassic rift grabens, and the offshore basins and platforms. Following multiple compressional tectonic episodes between Africa and North America during the Paleozoic Era that formed the Appalachian Mountains, the Mesozoic and Cenozoic Eras were dominated by tensional tectonic processes that separated Africa and North America. Extensional rifting during Triassic and Early Jurassic times resulted in numerous tensional grabens both onshore and offshore, which filled with nonmarine continental red beds, lacustrine deposits, and volcanic flows and debris. The final stage of this breakup between Africa and North America occurred beneath the present outer continental shelf and continental slope during Early or Middle Jurassic time when sea-floor spreading began to form new oceanic crust and lithosophere between the two continents as they drifted apart. Postrift subsidence of the marginal basins continued in response to cooling of the lithosphere and sedimentary loading. Geophysical surveys and oil-exploration drilling along the U.S. Atlantic continental margin during the past 5 years are beginning to answer many questions concerning its deep structure and stratigraphy and how it evolved during the rifting and early sea-floor-spreading stages of the separation of this region from Africa. Earlier geophysical studies of the U.S. continental margin used marine refraction and submarine gravity measurements. Single-channel seismic-reflection, marine magnetic, aeromagnetic, and continuous gravity measurements became available during the 1960s.

DNAG Special Publication↗