SEARCH · Geology Reports

Results for “Alaska”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93Linked to original sources

USGS1994

Seismic images of the Brooks Range fold and thrust belt, Arctic Alaska, from an integrated seismic reflection/refraction experiment

We describe results of an integrated seismic reflection/refraction experiment across the Brooks Range and flanking geologic provinces in Arctic Alaska. The seismic acquisition was unusual in that reflection and refraction data were collected simultaneously with a 700 channel seismograph system deployed numerous times along a 315 km profile. Shot records show continuous Moho reflections from 0–180 km offset, as well as numerous upper- and mid-crustal wide-angle events. Single and low-fold near-vertical incidence common midpoint (CMP) reflection images show complex upper- and middle-crustal structure across the range from the unmetamorphosed Endicott Mountains allochthon (EMA) in the north, to the metamorphic belts in the south. Lower-crustal and Moho reflections are visible across the entire reflection profile. Travel-time inversion of PmP arrivals shows that the Moho, at 33 km depth beneath the North Slope foothills, deepens abruptly beneath the EMA to a maximum of 46 km, and then shallows southward to 35 km at the southern edge of the range. Two zones of upper- and middle-crustal reflections underlie the northern Brooks Range above ~ 12–15 km depth. The upper zone, interpreted as the base of the EMA, lies at a maximum depth of 6 km and extends over 50 km from the range front to the north central Brooks Range where the base of the EMA outcrops above the metasedimentary rocks exposed in the Doonerak window. We interpret the base of the lower zone, at ~ 12 km depth, to be from carbonate rocks above the master detachment upon which the Brooks Range formed. The seismic data suggest that the master detachment is connected to the faults in the EMA by several ramps. In the highly metamorphosed terranes south of the Doonerak window, the CMP section shows numerous south-dipping events which we interpret as a crustal scale duplex involving the Doonerak window rocks. The basal detachment reflections can be traced approximately 100 km, and dip southward from about 10–12 km near the range front, to 14–18 km beneath the Doonerak window, to 26–28 km beneath the metamorphic belts in the central Brooks Range. The section documents middle- and lower-crustal involvement in the formation of the Brooks Range.

Alaska↗

USGS1981

Seismic evidence for an extensive gas-bearing layer at shallow depth, offshore from Prudhoe Bay, Alaska

High-resolution seismic reflection data, recorded offshore from Prudhoe Bay, Alaska, were processed digitally to determine the reflectivity structure of the uppermost layers of the seafloor. A prominent reflector, found at 27 m below the mud line (water depths 7-9 m), has a negative reflection coefficient greater than 0.5. The large acoustic impedance contrast, coupled with a report of gas encountered at a corresponding depth in a nearby drillhole, shows that the reflector is the upper boundary of a zone containing gas. The gas exists in sandy gravel capped by stiff, silty clay. Analysis of unprocessed conventional high-resolution records from the region indicates that the gas-bearing layer may extend over an area of at least 50 km2 at a depth of 20-35 m below the mud line. Similar-appearing reflectors (Reimnitz, 1972), previously unexplained, occur in patches over wide regions of the shelf where offshore oil development is beginning at a rapid pace. This suggests the exercise of caution with respect to possible hazards from shallow gas pockets.

Alaska↗

USGS1989

Changes in floral diversities, floral turnover rates, and climates in Campanian and Maastrichtian time, North Slope of Alaska

One-hundred-and-ten angiosperm pollen taxa have been found in upper Campanian to Masstrichtian rocks of the Colville River region, North Slope of Alaska. These are the highest paleolatitude Campanian and Maastrichtian floras known from North America. Total angiosperm pollen diversity rose during the Campanian and declined toward the end of the Maastrichtian. However, anemophilous porate pollen of the Betulaceae-Myricaceae-Ulmaceae complex increased gradually in diversity during the late Campanian and Maastrichtian and into the Paleocene. Turnover of angiosperm taxa was active throughout most of late Campanian and Maastrichtian time; rapid turnover affected mainly the taxa of zoophilous herbs, representing an bundant but ecologically subordinate element of the vegetation. Last appearances of pollen taxa during the late Campanian and Maastrichtian probably represented mainly extinctions rather than emigrations; end- Cretaceous angiosperm extinctions in the North American Arctic began well before the Cretaceous-Tertiary boundary event. The last appearances in the late Maastrichtian took place in bursts; they appear to represent stepwise rather than gradual events, which may indicate the existence of pulses of climatic change particularly in late Maastrichtian time. ?? 1989.

Alaska↗

USGS1988

Columbia Bay, Alaska: An 'upside down' estuary

Circulation and water properties within Columbia Bay, Alaska, are dominated by the effects of Columbia Glacier at the head of the Bay. The basin between the glacier terminus and the terminal moraine (sill depth of about 22 m) responds as an ‘upside down’ estuary with the subglacial discharge of freshwater entering at the bottom of the basin. The intense vertical mixing caused by the bouyant plume of freshwater creates a homogeneous water mass that exchanges with the far-field water through either a two- or a three-layer flow. In general, the glacier acts as a large heat sink and creates a water mass which is cooler than that in fjords without tidewater glaciers. The predicted retreat of Columbia Glacier would create a 40 km long fjord that has characteristics in common with other fjords in Prince William Sound.

Alaska↗

USGS1986

Field observations of bed shear stress and sediment resuspension on continental shelves, Alaska and California

Bed shear stress was estimated using wave and current measurements obtained with the GEOPROBE bottom-tripod system during resuspension events in Norton Sound, Alaska, and on the northern California shelf. The boundary-layer model of Grant and Madsen (1979, Journal of Geophysical Research, 84, 1797-1808) was used to compute the bed shear stress under combined wave-generated and quasi-steady currents. Resuspension events were identified by sudden, large increases in light scattering at 1.9 m above the sea floor. The shear-stress values were used to compute the Shields parameter (??). The results for Norton Sound are in excellent agreement with the Shields threshold criterion; the data for the California shelf plot somewhat above the Shields threshold curve, though generally within the scatter envelope. Although the surface sediments in each area contain substantial fine-grained fractions (mean diameters were 0.007 cm in Norton Sound and 0.002 cm on the California shelf), the results do not indicate significant cohesion, because the sediment was entrained at bed shear-stress values close to those predicted by the modified Shields curve for cohesionless fine-grained particles. We suspect that frequent wave stirring and observed plowing of the surface sediment by benthonic animals maintain a high water content and contribute to the ease with which these materials are resuspended.

Alaska, California↗

USGS1989

Geochemistry of placer gold, Koyukuk-Chandalar mining district, Alaska

The Koyukuk-Chandalar mining district of the Brooks Range mineral belt in north-central Alaska contains numerous placer gold deposits but few known lode gold sources. Gold grains, collected from 46 placer localities and 6 lode gold sites in the district, were analyzed for Ag and 37 trace elements utilizing direct current-arc optical emission spectroscopy. When possible, several measurements were made on each sample and averaged. Gold content was calculated by the summation of the 38 elements determined and subtracting from 100. The objectives of our study were to characterize the deposits by defining the type and number of distinct geochemical characteristics for the Au, to determine relationships of Au in placer deposits to possible lode sources (placer and lode), to identify possible primary sources of placer gold, and to study processes of placer formation. Interpretation of results emphasize that the Au grains are almost invariably ternary (Au-Ag-Cu) alloys. The average Cu content is 0.040% and the average Ag content and fineness [(Au/Au+Ag)×1,000] are 10.5% and 893 parts per thousand, respectively, for the 46 placer localities.

Journal of Geochemical Exploration↗

USGS1991

Geochemistry and exploration criteria for epithermal cinnabar and stibnite vein deposits in the Kuskokwim River region, southwestern Alaska

Cinnabar- and stibnite-bearing epithermal vein deposits are found throughout the Kuskokwim River region of southwestern Alaska. A geochemical orientation survey was carried out around several of these epithermal lodes to obtain information for planning regional geochemical surveys and to develop procedures which maximize the anomaly: threshold contrast of the deposits. Stream sediment, heavy-mineral concentrate, stream water, and vegetation samples were collected in drainages surrounding the Red Devil, Cinnabar Creek, White Mountain, Rhyolite, and Mountain Top deposits. Three sediment size fractions; nonmagnetic, paramagnetic and magnetic splits of the concentrate samples; stream waters; and the vegetation samples were analyzed for multi-element suites by a number of different chemical procedures. Nonmagnetic, heavy-mineral concentrates were also examined microscopically to identify their mineralogy.

Journal of Geochemical Exploration↗

USGS1991

Fluid inclusion gas chemistry as a potential minerals exploration tool: Case studies from Creede, CO, Jerritt Canyon, NV, Coeur d'Alene district, ID and MT, southern Alaska mesothermal veins, and mid-continent MVT's

Recent advances in instrumentation now permit quantitative analysis of gas species from individual fluid inclusions. Fluid inclusion gas data can be applied to minerals exploration empirically to establish chemical (gas composition) signatures of the ore fluids, and conceptually through the development of genetic models of ore formation from a framework of integrated geologic, geochemical, and isotopic investigations. Case studies of fluid inclusion gas chemistry from ore deposits representing a spectrum of ore-forming processes and environments are presented to illustrate both the empirical and conceptual approaches. We consider epithermal silver-gold deposits of Creede, Colorado, Carlin-type sediment-hosted disseminated gold deposits of Jerritt Canyon, Nevada, metamorphic silver-base-metal veins of the Coeur d'Alene district, Idaho and Montana, gold-quartz veins in accreted terranes of southern Alaska, and the mid-continent base-metal sulfide deposits of Mississippi Valley-Type (MVT's). Variations in gas chemistry determine the redox state of the ore fluids, provide compositional input for gas geothermometers, characterize ore fluid chemistry (e.g., CH 4 CO 2 , H 2 SSO 2 , CO 2 /H 2 S, organic-rich fluids, gas-rich and gas-poor fluids), identify magmatic, meteoric, metamorphic, shallow and deep basin fluids in ore systems, locate upwelling plumes of magmatic-derived volatiles, zones of boiling and volatile separation, interfaces between contrasting fluids, and important zones of fluid mixing. Present techniques are immediately applicable to exploration programsas empirical studies that monitor fluid inclusion gas threshold concentration levels, presence or absence of certain gases, or changes in gas ratios. We suggest that the greater contribution of fluid inclusion gas analysis is in the integrated and comprehensive chemical dimension that gas data impart to genetic models, and in the exploration concepts based on processes and environments of ore formation derived from these genetic models.

Journal of Geochemical Exploration↗

USGS1992

Reconnaissance exploration geochemistry in the central Brooks Range, northern Alaska: Implications for exploration of sediment-hosted zinc-lead-silver deposits

A reconnaissance geochemical survey was conducted in the southern Killik River quadrangle, central Brooks Range, northern Alaska. The Brooks Range lies within the zone of continuous permafrost which may partially inhibit chemical weathering and oxidation. The minus 30-mesh and nonmagnetic heavy-mineral concentrate fractions of sediment samples were chosen as the sample media for the survey so that mechanical rather than chemical dispersion patterns would be enhanced. A total of 263 sites were sampled within the southern half of the Killik River quadrangle at an average sample density of approximately one sample per 12 km 2 . All samples were submitted for multi-element analyses. In the western and central Brooks Range, several known sediment-hosted Zn-Pb-Ag(-Ba) deposits occur within a belt of Paleozoic rocks of the Endicott Mountains allochthon. Exploration for this type of deposit in the Brook Range is difficult, due to the inherently high background values for Ba, Zn and Pb in shale and the common occurrence of metamorphic quartz-calcite veins, many of which contain traces of sulfide minerals. Stream sediments derived from these sources produce numerous geochemical anomalies which are not necessarily associated with significant mineralization. R-mode factor analysis provides a means of distinguishing between element associations related to lithology and those related to possible mineralization. Factor analysis applied to the multi-element data from the southern Killik River quadrangle resulted in the discovery of two additional Zn-Pb-Ag mineral occurrences of considerable areal extent which are 80–100 km east of any previously known deposit. These have been informally named the Kady and Vidlee. Several lithogeochemical element associations, or factors, and three factors which represent sulfide mineralization were identified: Ag-Pb-Zn (galena and sphalerite) and Fe-Ni-Co-Cu (pyrite ± chalcopyrite) in the concentrate samples and Cd-Zn-Pb-As-Mn in the sediment samples. The distribution of high scores for each individual mineralization factor outlined several relatively large (200–250 km 2 ) geochemically favorable areas. When the distribution of high scores for all three factors were superimposed, samples characterized by high scores for one or both of the concentrate mineralization factors and the mineralization factor in sediments define basin areas of approximately 48 and 64 km 2 surrounding Kady and Vidlee, respectively.

Journal of Geochemical Exploration↗

USGS1993

Reconnaissance guidelines for gold exploration in Central Alaska

Distribution of more than 300 gold-bearing samples from the Livengood (Tolovana) and parts of the Fairbanks and Rampart mining districts in central Alaska, USA, indicate that the concentration of gold in placers is spatially related both to structural features and to Late Cretaceous and (or) Tertiary felsic plutons. The regional consistency of these spatial relationships is demonstrated by proximity analysis using a Geographic Information System (GIS), and suggests a genetic association between faults, felsic plutons, and gold occurrences. The local presence of gold within several of the plutons indicates that these are the source of some of the gold. In addition, some gold occurs proximal to faults where plutons are not present, suggesting that some of the gold was also derived from the country rock. We envision a model whereby weakly mineralized solutions, thermally driven by latent plutonic heat, were enriched by circulation through clastic units that may have had a naturally elevated gold background. The resultant enriched solutions were channeled and reconcentrated along or adjacent to large-scale fault systems. Future exploration to define individual target areas should be directed toward areas where Late Cretaceous and (or) Tertiary felsic plutons occur near major faults. ?? 1993.

Journal of Geochemical Exploration↗

USGS1994

Precursory swarms of long-period events at Redoubt Volcano (1989-1990), Alaska: Their origin and use as a forecasting tool

During the eruption of Redoubt Volcano from December 1989 through April 1990, the Alaska Volcano Observatory issued advance warnings of several tephra eruptions based on changes in seismic activity related to the occurrence of precursory swarms of long-period (LP) seismic events (dominant period of about 0.5 s). The initial eruption on December 14 occurred after 23 years of quiescence and was heralded by a 23-hour swarm of LP events that ended abruptly with the eruption. After a series of vent-clearing explosions over the next few days, dome growth began on December 21. Another swarm, with LP events similar to those of the first, began on the 26th and ended in a major tephra eruption on January 2. Eruptions continued over the next two weeks and then ceased until February 15, when a large eruption initiated a long phase of repetitive dome-building and dome-destroying episodes that continued into April. Warnings were issued before the major events on December 14 and January 2, but as the eruptive sequence continued after January 2, the energy of the swarms decreased and forecasting became more difficult. A significant but less intense swarm preceded the February 15 eruption, which was not forecast. This eruption destroyed the only seismograph on the volcanic edifice and stymied forecasting until March 4, when the first of three new stations was installed within 3 km of the active vent. From March 4 to the end of the sequence on April 21, there were eight eruptions, six of which were preceded by detectable swarms of LP events. Although weak, these swarms provided the basis for warnings issued before the eruptions on March 23 and April 6. The initial swarm on December 13 had the following features: (1) short duration (23 hours); (2) a rapidly accelerating rate of seismic energy release over the first 18 hours of the swarm, followed by a decline of activity during the 5 hours preceding the eruption; (3) a magnitude range from −0.4 to 1.6; (4) nearly identical LP signatures with a dominant period near 0.5 s; (5) dilatational first motions everywhere; and (6) a stationary source location at a depth of 1.4 km beneath the crater. This occurrence of long-period events suggests a model involving the interaction of magma with groundwater in which magmatic gases, steam and water drive a fixed conduit at a stationary point throughout the swarm. The initiation of that sequence of events is analogous to the failure of a pressure-relief valve connecting a lower, supercharged magma-dominated reservoir to a shallow hydrothermal system. A three-dimensional model of a vibrating fluid-filled crack recently developed by Chouet is found to be compatible with the seismic data and yields the following parameters for the LP source: crack length, 280–380 m; crack width, 140–190 m; crack thickness, 0.05–0.20 m; crack stiffness, 100–200; sound speed of fluid, 0.8–1.3 km/s; compressional-wave speed of rock, 5.1 km/s; density ratio of fluid to rock, ≈0.4; and ratio of bulk modulus of fluid to rigidity of rock, 0.03–0.07. The fluid-filled crack is excited intermittently by an impulsive pressure drop that varies in magnitude within the range of 0.4 to 40 bar. Such disturbance appears to be consistent with a triggering mechanism associated with choked flow conditions in the crack.

Alaska↗

USGS1994

The 1989-1990 eruption of Redoubt Volcano, Alaska: impacts on aircraft operations

The December 1989–June 1990 eruption of Redoubt Volcano affected commercial and military air operations in the vicinity of Anchorage, Alaska. These effects were due to the direct impact of volcanic ash on jet aircraft, as well as to the rerouting and cancellations of flight operations owing to eruptive activity. Between December and February, five commercial jetliners were damaged from ash encounters. The most serious incident took place on December 15, 1989 when a Boeing 747-400 aircraft temporarily lost power of all four engines after encountering an ash cloud as the airplane descended for a landing in Anchorage. While there were no injuries to passengers, the damage to engines, avionics, and aircraft structure from this encounter is estimated at $80 million. Four additional encounters between jet aircraft and Redoubt ash clouds occurred in the Anchorage area on December 15 and 16, 1989 and February 21, 1990; none resulted in engine failure. Two additional encounters took place on December 17, 1989 when jet airliners encountered the Redoubt cloud over west Texas. At the time of these encounters, the cloud was up to 55 hours old and had traveled in excess of 2,900 nautical miles (5,300 km). Following the December 15 encounters, Anchorage International Airport remained open, however, most airline companies canceled operations for up to several days. As communications between Federal agencies and airlines improved, and as a better understanding of the nature and behavior of ash-rich eruption clouds was achieved, most airlines resumed normal service by early January 1990. The resulting loss of revenue at Anchorage International Airport during several months following the eruption is estimated to total $2.6 million. The impact on general aviation and military operations consisted mostly of cancellation and rerouting of flights.

Alaska↗

USGS1994

Vapor saturation and accumulation in magmas of the 1989-1990 eruption of Redoubt Volcano, Alaska

The 1989–1990 eruption of Redoubt Volcano, Alaska, provided an opportunity to compare petrologic estimates of SO 2 and Cl emissions with estimates of SO 2 emissions based on remote sensing data and estimates of Cl emissions based on plume sampling. In this study, we measure the sulfur and chlorine contents of melt inclusions and matrix glasses in the eruption products to determine petrologic estimates of SO 2 and Cl emissions. We compare the results with emission estimates based on COSPEC and TOMS data for SO 2 and data for Cl/SO 2 in plume samples. For the explosive vent clearing period (December 14–22, 1989), the petrologic estimate for SO 2 emission is 21,000 tons, or ~12% of a TOMS estimate of 175,000 tons. For the dome growth period (December 22, 1989 to mid-June 1990), the petrologic estimate for SO 2 emission is 18,000 tons, or ~3% of COSPEC-based estimates of 572,000–680,000 tons. The petrologic estimates give a total SO 2 emission of only 39,000 tons compared to an integrated TOMS/COSPEC emission estimate of ~1,000,000 tons for the whole eruption, including quiescent degassing after mid-June 1990. Petrologic estimates also appear to underestimate Cl emissions, but apparent HCl scavenging in the plume complicates Cl emission comparisons. Several potential sources of ‘excess sulfur’ often invoked to explain petrologic SO 2 deficits are concluded to be unlikely for the 1989–1990 Redoubt eruption — e.g., breakdown of sulfides, breakdown of anhydrite, release of SO 2 from a hydrothermal system, degassing of commingled infusions of basalt in the magma chamber, and syn-eruptive degassing of sulfur from melt present in non-erupted magma. Leakage and/or diffusion of sulfur from melt inclusions do not provide convincing explanations for the petrologic SO 2 deficits either. The main cause of low petrologic estimates for SO 2 is that melt inclusions do not represent the total sulfur content of the Redoubt magmas, which were vapor-saturated magmas carrying most of their sulfur in an accumulated vapor phase. Almost all the sulfur of the SO 2 emissions was present prior to emission as accumulated magmatic vapor at 6–10 km depth in the magma that supplied the eruption; whole-rock normalized concentrations of gaseous excess S in these magmas remained at ~0.2 wt.% throughout the eruption, equivalent to ~0.7 vol.% at depth. Data for CO 2 emissions during the eruption indicate that CO 2 at whole-rock concentrations of ~0.6 wt.% in the erupted magma was a key factor in creating the vapor saturation and accumulation condition making a vapor phase source of excess sulfur possible at depth. When explosive volcanism involves magma with accumulated vapor, melt inclusions do not provide a sufficient basis for predicting SO 2 emissions. Thus, petrologic estimates made for SO 2 emissions during explosive eruptions of the past may be too low and may significantly underestimate impacts on climate and the chemistry of the atmosphere.

Journal of Volcanology and Geothermal Research↗

USGS1994

Miocene and Pliocene lacustrine and fluvial sequences, Upper Ramparts and Canyon village, Porcupine river, east-central Alaska

Cenozoic strata exposed along the Porcupine River between the Upper Ramparts and Canyon Village, Alaska, can be divided into five unconformity-bounded units (sequences) which are: lower and middle Miocene unit A, the white sandy fluvial sequence with peat beds; middle Miocene unit B, the basalt sequence-part B1 is basalt, and part B2 is organic-rich sedimentary beds; upper Miocene unit C, mudrock-dominated lake sequence; late Miocene or Pliocene to Pleistocene unit D, terrace gravels, detrital organic matter and associated sediments, and Holocene unit E, mixed sand and gravel-rich sediment and other sedimentary material including peat and eolian silt. The sequence (unit A) of lower and middle Miocene fluvial deposits formed in streams and on flood plains, just before the inception of local volanism. Fossil pollen from unit A suggests conifer-dominated regional forests and cool temperate climates. Peat beds and lake deposits from unit B contain pollen that indicates a warmer temperate climate coinciding with the middle Miocene thermal maximum. The lake deposits (unit C) downstream from the basalts accumulated in a small basin which resulted from a hydrologic system that was dammed in the late Miocene but breached soon thereafter. The lower part of the terrace gravels (unit D) expresses breaching of the dammed hydrologic system (of unit C). The Porcupine River became a major tributary of the Yukon River in late Pleistocene time when Laurentide ice blocked drainage from the Yukon interior basins causing meltwater to spill over the low divide separating it from the Porcupine River drainage initiating erosion and capture of the Yukon interior basins. ?? 1994.

Quaternary International↗

USGS1994

40Ar 39Ar age constraints on neogene sedimentary beds, Upper Ramparts, half-way Pillar and Canyon village sites, Porcupine river, east-central Alaska

40 Ar/ 39 Ar ages of volcanic rocks are used to provide numerical constraints on the age of middle and upper Miocene sedimentary strata collected along the Porcupine River. Intercalated sedimentary rocks north of latitude 67°10′N in the Porcupine terrane of east-central Alaska contain a rich record of plant fossils. The fossils are valuable indicators of this interior region's paleoclimate during the time of their deposition. Integration of the 40 Ar/ 39 Ar 40 Ar 39 Ar "> results with paleomagnetic and sedimentological data allows for refinements in estimating the timing of deposition and duration of selected sedimentary intervals. 40 Ar 39 Ar "> 40Ar39Ar plateau age spectra, from whole rock basalt samples, collected along the Upper Ramparts and near Half-way Pillar on the Porcupine River, range from 15.7 ± 0.1 Ma at site 90-6 to 14.4 ± 0.1 Ma at site 90-2. With exception of the youngest basalt flow at site 90-2, all of the samples are of reversed magnetic polarity, and all 40 Ar/ 39 Ar age spectrum results are consistent with the deposition of the entire stratigraphic section during a single interval of reversed magnetic polarity. The youngest flow at site 90-2 was emplaced during an interval of normal polarity. With age, paleomagnetic and sedimentological data, the ages of the Middle Miocene sedimentary rocks between the basalt flows at sites 90-1 and 90-2 can be assigned to an interval within the limits of analytical precision of 15.2 ± 0.1 Ma; thus, the sediments were deposited during the peak of the Middle Miocene thermal maximum. Sediments in the upper parts of sites 90-1 and 90-2 were probably deposited during cooling from the Middle Miocene thermal maximum. 40 Ar/ 39 Ar results of plagioclase and biotite from a single tephra, collected at sites 90-7 and 90-8 along the Canyon Village section of the Porcupine River, indicate an age of 6.57 ± 0.02 Ma for its time of eruption and deposition. These results, together with sedimentological and paleomagnetic data, suggest that all of the Upper Miocene lacustrine sedimentary rocks at these sites were deposited during a single interval of reversed magnetic polarity and may represent a duration of only about 40,000 years. The age of this tephra corresponds with a late late Miocene warm climatic interval. The results from the Upper Ramparts and Half-way Pillar sites are used to estimate a minimum interval of continental flood basalt activity of 1.1–1.5 million years, and to set limits for the timing and duration of Tertiary extensional tectonic activity in the Porcupine terrane. Our data indicate that the oroclinal flexure that formed before the deposition of the basalts at the eastern end of the Brooks Range was created prior to 15.7 ± 0.1 Ma.

Alaska↗

USGS2008

Sulfide oxidation and distribution of metals near abandoned copper mines in coastal environments, Prince William Sound, Alaska, USA

The oxidation of sulfide-rich rocks, mostly leftover debris from Cu mining in the early 20th century, is contributing to metal contamination of local coastal environments in Prince William Sound, Alaska. Analyses of sulfide, water, sediment, precipitate and biological samples from the Beatson, Ellamar, and Threeman mine sites show that acidic surface waters generated from sulfide weathering are pathways for redistribution of environmentally important elements into and beyond the intertidal zone at each site. Volcanogenic massive sulfide deposits composed of pyrrhotite and (or) pyrite + chalcopyrite + sphalerite with subordinate galena, arsenopyrite, and cobaltite represent potent sources of Cu, Zn, Pb, As, Co, Cd, and Hg. The resistance to oxidation among the major sulfides increases in the order pyrrhotite ??? sphalerite < chalcopyrite ??? pyrite; thus, pyrrhotite-rich rocks are typically more oxidized than those dominated by pyrite. The pervasive alteration of pyrrhotite begins with rim replacement by marcasite followed by replacement of the core by sulfur, Fe sulfate, and Fe-Al sulfate. The oxidation of chalcopyrite and pyrite involves an encroachment by colloform Fe oxyhydroxides at grain margins and along crosscutting cracks that gradually consumes the entire grain. The complete oxidation of sulfide-rich samples results in a porous aggregate of goethite, lepidocrocite and amorphous Fe-oxyhydroxide enclosing hydrothermal and sedimentary silicates. An inverse correlation between pH and metal concentrations is evident in water data from all three sites. Among all waters sampled, pore waters from Ellamar beach gravels have the lowest pH (???3) and highest concentrations of base metals (to ???25,000 ??g/L), which result from oxidation of abundant sulfide-rich debris in the sediment. High levels of dissolved Hg (to 4100 ng/L) in the pore waters probably result from oxidation of sphalerite-rich rocks. The low-pH and high concentrations of dissolved Fe, Al, and SO4 are conducive to precipitation of interstitial jarosite in the intertidal gravels. Although pore waters from the intertidal zone at the Threeman mine site have circumneutral pH values, small amounts of dissolved Fe2+ in the pore waters are oxidized during mixing with seawater, resulting in precipitation of Fe-oxyhydroxide flocs along the beach-seawater interface. At the Beatson site, surface waters funneled through the underground mine workings and discharged across the waste dumps have near-neutral pH (6.7-7.3) and a relatively small base-metal load; however, these streams probably play a role in the physical transport of metalliferous particulates into intertidal and offshore areas during storm events. Somewhat more acidic fluids, to pH 5.3, occur in stagnant seeps and small streams emerging from the Beatson waste dumps. Amorphous Fe precipitates in stagnant waters at Beatson have high Cu (5.2 wt%) and Zn (2.3 wt%) concentrations that probably reflect adsorption onto the extremely high surface area of colloidal particles. Conversely, crystalline precipitates composed of ferrihydrite and schwertmannite that formed in the active flow of small streams have lower metal contents, which are attributed to their smaller surface area and, therefore, fewer reactive sorption sites. Seeps containing precipitates with high metal contents may contribute contaminants to the marine environment during storm-induced periods of high runoff. Preliminary chemical data for mussels (Mytilus edulis) collected from Beatson, Ellamar, and Threeman indicate that bioaccumulation of base metals is occurring in the marine environment at all three sites.

Applied Geochemistry↗

USGS2008

Relationships between microbial communities and environmental parameters at sites impacted by mining of volcanogenic massive sulfide deposits, Prince William Sound, Alaska

The relations among geochemical parameters and sediment microbial communities were examined at three shoreline sites in the Prince William Sound, Alaska, which display varying degrees of impact by acid-rock drainage (ARD) associated with historic mining of volcanogenic massive sulfide deposits. Microbial communities were examined using total fatty acid methyl esters (FAMEs), a class of compounds derived from lipids produced by eukaryotes and prokaryotes (bacteria and Archaea); standard extraction techniques detect FAMEs from both living (viable) and dead (non-viable) biomass, but do not detect Archaeal FAMEs. Biomass and diversity (as estimated by FAMEs) varied strongly as a function of position in the tidal zone, not by study site; subtidal muds, Fe oxyhydroxide undergoing biogenic reductive dissolution, and peat-rich intertidal sediment had the highest values. These estimates were lowest in acid-generating, intertidal zone sediment; if valid, the estimates suggest that only one or two bacterial species predominate in these communities, and/or that Archeal species are important members of the microbial community in this sediment. All samples were dominated by bacterial FAMEs (median value >90%). Samples with the highest absolute abundance of eukaryotic FAMEs were biogenic Fe oxyhydroxides from shallow freshwater pools (fungi) and subtidal muds (diatoms). Eukaryotic FAMEs were practically absent from low-pH, sulfide-rich intertidal zone sediments. The relative abundance of general microbial functional groups such as aerobes/anaerobes and gram(+)/gram(-) was not estimated due to severe inconsistency among the results obtained using several metrics reported in the literature. Principal component analyses (PCAs) were performed to investigate the relationship among samples as separate functions of water, sediment, and FAMEs data. PCAs based on water chemistry and FAMEs data resulted in similar relations among samples, whereas the PCA based on sediment chemistry produced a very different sample arrangement. Specifically, the sediment parameter PCA grouped samples with high bulk trace metal concentration regardless of whether the metals were incorporated into secondary precipitates or primary sulfides. The water chemistry PCA and FAMEs PCA appear to be less prone to this type of artifact. Signature lipids in sulfide-rich sediments could indicate the presence of acid-tolerant and/or acidophilic members of the genus Thiobacillus or they could indicate the presence of SO4-reducing bacteria. The microbial community documented in subtidal and offshore sediments is rich in SRB and/or facultative anaerobes of the Cytophaga-Flavobacterium group; both could reasonably be expected in PWS coastal environments. The results of this study provide evidence for substantial feedback between local (meter to centimeter-scale) geochemical variations, and sediment microbial community composition, and show that microbial community signatures in the intertidal zone are significantly altered at sites where ARD drainage is present relative to sites where it is not, even if the sediment geochemistry indicates net accumulation of ARD-generated trace metals in the intertidal zone. ?? 2007 Elsevier Ltd. All rights reserved.

Applied Geochemistry↗

USGS2009

Diffuse gas emissions at the Ukinrek Maars, Alaska: Implications for magmatic degassing and volcanic monitoring

Diffuse CO2 efflux near the Ukinrek Maars, two small volcanic craters that formed in 1977 in a remote part of the Alaska Peninsula, was investigated using accumulation chamber measurements. High CO2 efflux, in many places exceeding 1000 g m−2 d−1, was found in conspicuous zones of plant damage or kill that cover 30,000–50,000 m2 in area. Total diffuse CO2 emission was estimated at 21–44 t d−1. Gas vents 3-km away at The Gas Rocks produce 0.5 t d−1 of CO2 that probably derives from the Ukinrek Maars basalt based on similar δ13C values (∼−6‰), 3He/4He ratios (5.9–7.2 RA), and CO2/3He ratios (1–2 × 109) in the two areas. A lower 3He/4He ratio (2.7 RA) and much higher CO2/3He ratio (9 × 1010) in gas from the nearest arc-front volcanic center (Mount Peulik/Ugashik) provide a useful comparison. The large diffuse CO2 emission at Ukinrek has important implications for magmatic degassing, subsurface gas transport, and local toxicity hazards. Gas–water–rock interactions play a major role in the location, magnitude and chemistry of the emissions.

Alaska↗