Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Paper”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92Linked to original sources
USGS2007

Regional dynamics of grassland change in the western Great Plains

This paper examines the contemporary land-cover changes in two western Great Plains ecoregions between 1973 and 2000. Agriculture and other land uses can have a substantial effect on grassland cover that varies regionally depending on the primary driving forces of change. In order to better understand change, the rates, types, and causes of land conversion were examined for 1973, 1980, 1986, 1992, and 2000 using Landsat satellite data and a statistical sampling strategy. The overall estimated rate of land-cover change between 1973 and 2000 was 7.4% in the Northwestern Great Plains and 11.5% in the Western High Plains. Trends in both ecoregions have similarities, although the dynamics of change differ temporally depending on driving forces. Between 1973 and 1986, grassland cover declined when economic opportunity drove an expansion of agriculture. Between 1986 and 2000, grassland expanded as public policy and a combination of socioeconomic factors drove a conversion from agriculture to grassland. ?? 2007 Copyright by the Center for Great Plains Studies, University of Nebraska-Lincoln.

Conference Paper↗
USGS2007

Nitrogen saturation in the Rocky Mountains: Linking emissions, deposition, and ecosystem effects using stable isotopes of nitrogen compounds

Elevated levels of atmospheric N deposition are affecting terrestrial and aquatic ecosystems at high elevations in Rocky Mountain National Park and adjacent areas of the Front Range of Colorado. Federal and state agencies are now working together to develop cost-effective means for reducing atmospheric N deposition. A discussion on N saturation covers the need for better understanding of N emission source areas and source types that contribute to N deposition in the Rocky Mountains Front Range of Colorado; reductions in NO emissions that resulted from Clean Air Act Amendments, which caused NO3 deposition to decrease between 1984 and 2003; factors contributing to N deposition, e.g., rapid population growth and energy development; origins of NO3, e.g., as NO emissions from fossil fuel combustion, including stationary sources (e.g. emission from coal combustion in electric generating units), and mobile sources (vehicle emissions); disperse stationary sources from energy resource development, e.g., natural gas production; and the importance of incorporating local source characterization and finer spatial and temporal sampling into future studies, which could provide additional insight into N deposition source attribution. This is an abstract of a paper presented at the 100th Annual Conference and Exhibition of the Air and Waste Management Association (Pittsburgh, PA 6/26-29/2007).

Conference Paper↗
USGS2011

Pore morphology effect in microlog for porosity prediction in a mature field

In an matured field, developed during the 1950s, no porosity logs were available from sources other than invaded zone resistivity Rxo . The microresistivity porosity is calibrated with the core porosity to yield an accurate estimate of the porosity. However, the procedure of calibrating the porosity with Rxo for a linear regression model may not be predictive without an understanding of the pore types in the reservoir interval. A thorough investigation of the pore types, based on the lithofacies description obtained from the core analysis, and its role in obtaining a good estimate of porosity is demonstrated in the Ogallah field. Therefore, the objective of this paper is to separate the porosity-microlog data into pore-type based zones with characteristic cementation exponents (m) in this multi-petrotype reservoir with a complex mixture of Arbuckle dolomite and sandstone rock. The value of m is critical in making estimates of water saturation. "Rule of thumb" values of cementation might lead to errors in water saturation on either the optimistic or the pessimistic side. The rock types in the Ogallah contain interparticle/intercrystalline, vugs and fractures distributed through the rock-facies, which influence the values of cementation factor. We use the modern typed well to shed light on the Archie's equation parameter values. Rock fabric numbers and flow zone indices have been identified for classification of dolomite and sandstone, respectively. The analysis brings out characteristic cementation factors for distinct pore types in the Arbuckle rock. The porosity predictions The analysis results also compliment the petrofacies delineation using LDA in this complicated rock layout as a quality control of the statistical application. The comparison between the predicted and core porosities shows a significant improvement over using a single m value for carbonates and sandstones which will lead to improved description of a matured field. Copyright 2011, Society of Petroleum Engineers.

Conference Paper↗
USGS2008

Experimental approaches to assessing the impact of a cesium chloride radiological dispersal device

The US EPA, as a part of the Chemical, Biological, Radiological-Nuclear, and Explosives (CBRNE) Research and Technology Initiative (CRTI) project team, is currently working to assess the impacts of an urban radiological dispersion device (RDD) and to develop containment and decontamination strategies. Three efforts in this area are currently underway: development of a laboratory-scale cesium chloride deposition method to mimic a RDD; assessment of cesium (Cs) penetration depth and pathways in urban materials using two dimensional (2-D) mapping laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS); and experimental determination of distribution coefficients (kd) for Cs in water-building material systems. It is critical that, when performing laboratory-scale experiments to assess the fate of Cs from an RDD, the Cs particle deposition method mimics the RDD deposition. Once Cs particles are deposited onto urban surfaces, 2-D mapping of Cs concentrations using LA-ICP-MS is a critical tool for determining Cs transport pathways through these materials. Lastly, distribution coefficients are critical for understanding the transport of Cs in urban settings when direct measurements of its penetration depth are unavailable. An assessment of the newly developed deposition method along with preliminary results from the penetration experiments are presented in this paper.

Conference Paper↗
USGS2008

A generic analysis of energy use and solvent selection for CO2 separation from post-combustion flue gases

A thermodynamic calculation was performed to determine the theoretical minimum energy used to separate CO2 from a coal combustion flue gas in a typical adsorption-desorption system. Under ideal conditions, the minimum energy required to separate CO2 from post-combustion flue gas and produce pure CO2 at 1 atmospheric pressure was only about 1183 kJ/kg CO2. This amount could double with the addition of the driving forces of mass and heat transfer and the adverse impacts of absorption heat release on adsorption capacity. Thermodynamic analyses were also performed for the aqueous amine-based absorption process. Two CO2 reaction mechanisms, the carbamate formation reaction with primary/secondary amines and the CO2 hydration reaction with tertiary amines, were included in the absorption reaction. The reaction heat, sensible heat, and stripping heat were all important to the total heat requirement. The heat use of an ideal tertiary amine amounted to 2786 kJ/kg, compared to 3211 kJ/kg for an ideal primary amine. The heat usage of an ideal amine was about 20% lower than that of commercially available amines. Optimizing the absorption process configuration could further reduce energy use. This is an abstract of a paper presented at the 2008 AIChE Spring National Meeting (New Orleans, LA 4/6-10/2008).

Conference Paper↗
USGS2008

Removal of phosphorus from wastewater using ferroxysorb sorption media produced from amd sludge

Treatment of acid mine drainage (AMD), whether with lime, limestone, caustic or simple aeration, nearly always results in generation of a metal hydroxide sludge. Disposal of the sludge often constitutes a significant fraction of the operating cost for the AMD treatment plant. Research at the USGS - Leetown Science Center has shown that AMD sludge, with its high content of aluminum and iron oxides, has a high affinity of phosphorus (P). Anthropogenic sources of P are associated with eutrophication and degradation of aquatic environments, resulting in anoxic dead zones in certain sensitive waterways. In this paper, we describe a method of converting the AMD sludge from a liability into an asset - Ferroxysorb P removal media - which can be used to remove excess P from wastewater. Three different Ferroxysorb media samples were produced from differing AMD sources and tested for P removal. Adsorption isotherms confirmed that the media had a high sorption capacity for P, as high as 19,000 mg/kg. The technology was demonstrated at an active fish hatchery, where the media remained in service for over three months without stripping or regeneration. Over that period of time, the calculated P removal was 50%, even at a very low influent P concentration of 60 parts per billion. In summary, use of the AMD-derived Ferroxysorb sorption media will reduce AMD treatment costs while at the same time helping to resolve the pressing environmental issue of eutrophication and degradation of sensitive waterways.

Conference Paper↗
USGS2007

Online catalog of world-wide test sites for the post-launch characterization and calibration of optical sensors

In an era when the number of Earth-observing satellites is rapidly growing and measurements from these sensors are used to answer increasingly urgent global issues, it is imperative that scientists and decision-makers rely on the accuracy of Earth-observing data products. The characterization and calibration of these sensors are vital to achieve an integrated Global Earth Observation System of Systems (GEOSS) for coordinated and sustained observations of Earth. The U.S. Geological Survey (USGS), as a supporting member of Committee on Earth Observation Satellites (CEOS) and GEOSS, worked with partners around the world to establish an online catalogue of prime candidate world-wide test sites for the post-launch characterization and calibration of space-based optical imaging sensors. The online catalogue provides easy public web site access to this vital information for the global community. This paper further describes the catalogue, the test sites, and the methodologies to utilize the test sites. It also provides information regarding access to the online catalogue and plans for further development of the catalogue in cooperation with calibration specialists from agencies and organizations around the world. Through greater access to and understanding of these vital test sites and their use, the validity and utility of information gained from Earth remote sensing will continue to improve.

Conference Paper↗
USGS2007

Trends in the occurrence of MTBE in drinking water in the Northeast United States

Public water systems in Connecticut, Maine, Maryland, New Hampshire, New Jersey, and Rhode Island sampled treated drinking water from 1993-2006 and analyzed the samples for MTBE. The US Geological Survey examined trends in the occurrence of MTBE in drinking water derived from ground water in these States for two near-decadal time steps; 1993-1999 and 2000-2006. MTBE was detected in 14% of drinking water samples collected in all States from 1993-1999 and in 19% of drinking water samples collected from the same systems from 2000-2006 and this difference was statistically significant. Trends in the occurrence of MTBE in each State by individual year indicated significant positive trends in Maryland and New Hampshire. Significant, increasing trends in MTBE concentrations were observed in Maryland and Rhode Island by individual year. This is an abstract of a paper presented at the 2007 Petroleum Hydrocarbons and Organic Chemicals in Ground Water: Prevention, Assessment and Remediation Conference (Houston, TX 11/5-6/2007).

Conference Paper↗
USGS2007

Multi-scale reservoir modeling as an integrated assessment tool for geo-sequestration in the San Juan Basin

The Southwestern Regional Partnership on CO2 Sequestration conducted an Enhanced Coalbed Methane (ECBM)/Carbon Storage Pilot in the San Juan Basin as part of the ongoing DOE/NETL Carbon Capture and Storage Program. The primary goal of this pilot is to demonstrate the efficacy of using CO2 to enhance coalbed methane recovery particularly near reservoir abandonment pressure while also evaluating the suitability of coal seams for longer-term carbon storage. Basic geologic models of the coal seams were developed from well logs in the area. Production histories from several surrounding CBM wells were shown. To monitor the injection of up to 75,000 ton of CO2 beginning September 2007, seismic surveys and tiltmeter arrays were utilized. Larger-scale geo-hydrodynamic simulations were used to develop a regional model for the fluid dynamics of the northern San Juan Basin. Smaller-scale reservoir simulations, incorporating available laboratory and field data, were used to develop an improved understanding of reservoir dynamics within the specific 640-acre pilot area. Both modeling scales were critical to assessing the suitability of deploying commercial carbon storage programs throughout the basin. Reservoir characterization results on the optimization of total CO2 injection volume, injection rate over time, and how CO2 is expected to disperse after injection are presented. This is an abstract of a paper presented at the 2007 AIChE Annual Meeting (Salt Lake City, UT 11/4-9/2007).

Conference Paper↗
USGS2006

Contamination of ground water by PCE - A national perspective

Perchloroethylene (PCE) has physical and chemical properties that make it likely to persist in groundwater if released to the environment. The US Geological Survey has collected or compiled data on the occurrence of PCE in groundwater from major aquifers around the US. These data represent the occurrence of PCE in the groundwater resource as a whole and not occurrence at specific release sites. PCE was detected at measurable concentrations in nearly one in 10 wells in major aquifers throughout the country. Trichloroethylene was found most commonly with PCE and its presence may be due, in part, to reductive dechlorination of PCE. This is an abstract of a paper presented at the Petroleum Hydrocarbons and Organic Chemicals in Ground Water: Prevention, Assessment, and Remediation Conference (Houston, TX 11/6-7/2006).

Conference Paper↗
USGS2006

Scientific developments ISFD3

Highlights, trends, and consensus from the 63 papers submitted to the Scientific Developments theme of the Third International Symposium on Flood Defence (ISFD) are presented. Realizing that absolute protection against flooding can never be guaranteed, trends in flood management have shifted: (1) from flood protection to flood-risk management, (2) from reinforcing structural protection to lowering flood levels, and (3) to sustainable management through integrated problem solving. Improved understanding of watershed responses, climate changes, applications of GIS and remote-sensing technologies, and advanced analytical tools appeared to be the driving forces for renewing flood-risk management strategies. Technical competence in integrating analytical tools to form the basin wide management systems are demonstrated by several large, transnation models. However, analyses from social-economic-environmental points of view are found lag in general. ?? 2006 Taylor & Francis Group.

Conference Paper↗
USGS2009

High resolution near-bed observations in winter near Cape Hatteras, North Carolina

The U.S. Geological Survey (USGS) Coastal and Marine Science Center in Woods Hole, Massachusetts, is leading an effort to understand the regional sediment dynamics along the coastline of North and South Carolina. As part of the Carolinas Coastal Change Processes Project, a geologic framework study in June of 2008 by the Woods Hole Coastal and Marine Science Center's Sea Floor Mapping Group focused on the seaward limit of Diamond Shoals and provided high resolution bathymetric data, surficial sediment characteristics, and subsurface geologic stratigraphy. These data also provided unprecedented guidance to identify deployment locations for tripods and moorings to investigate the processes that control sediment transport at Diamond Shoals. Equipment was deployed at three sites from early January, 2009 through early May, 2009: north and south of the shoals at 15 m depth, and at the tip at 24 m depth. Many strong storm systems were recorded during that time period. Mounted on the tripods were instruments to measure surface waves, pressure, current velocity, bottom turbulence, suspended-sediment profiles, and sea-floor sand-ripple bedforms. Many instruments were designed and programmed to sample in high resolution in time and space, as fast as 8 Hz hourly bursts and as small as 6 cm bin sizes in near bottom profiles. A second tripod at the north site also held a visual camera system and sonar imaging system which document seafloor bedforms. The region is known for its dynamics, and one of the tripods tipped over towards the end of the experiment. A preliminary look at the data suggests the region is characterized by high energy. Raw data from a burst recorded at the south site on Mar. 26 th show instantaneous flow speed at 150 cm/s at 0.5 m above the seabed. This paper reports preliminary highlights of the observations, based on raw data, and lessons learned from a deployment of large tripod systems in such a dynamic location. ??2009 MTS.

Conference Paper↗
USGS2008

NASA's explorer school and spaceward bound programs: Insights into two education programs designed to heighten public support for space science initiatives

Introduction: NASA has played an influential role in bringing the enthusiasm of space science to schools across the United States since the 1980s. The evolution of this public outreach has led to a variety of NASA funded education programs designed to promote student interest in science, technology, engineering, math, and geography (STEM-G) careers. Purpose: This paper investigates the educational outreach initiatives, structure, and impact of two of NASA's largest educational programs: the NASA Explorer School (NES) and NASA Spaceward Bound programs. Methods: The investigation further provides a detailed overview of the structure of these two NASA education outreach programs, while providing information regarding selection criteria and program developments over time. Results: Since its induction in 2003 the NES program has networked and provided resources to over 300 schools across the United States. Future directions include further development of mentor schools for each new NES school selected, while also developing a longitudinal student tracking system for NES students to monitor their future involvement in STEM-G careers. The Spaceward Bound program, now in its third year of teacher outreach, is looking to further expand its teacher network and scientific collaboration efforts, while building on its teacher mentorship framework.

Conference Paper↗
USGS2011

Dynamic resource allocation in conservation planning

Consider the problem of protecting endangered species by selecting patches of land to be used for conservation purposes. Typically, the availability of patches changes over time, and recommendations must be made dynamically. This is a challenging prototypical example of a sequential optimization problem under uncertainty in computational sustainability. Existing techniques do not scale to problems of realistic size. In this paper, we develop an efficient algorithm for adaptively making recommendations for dynamic conservation planning, and prove that it obtains near-optimal performance. We further evaluate our approach on a detailed reserve design case study of conservation planning for three rare species in the Pacific Northwest of the United States.

Conference Paper↗
USGS2009

Toward production from gas hydrates: Current status, assessment of resources, and simulation-based evaluation of technology and potential

Gas hydrates (GHs) are a vast energy resource with global distribution in the permafrost and in the oceans. Even if conservative estimates are considered and only a small fraction is recoverable, the sheer size of the resource is so large that it demands evaluation as a potential energy source. In this review paper, we discuss the distribution of natural GH accumulations, the status of the primary international research and development (R&D) programs, and the remaining science and technological challenges facing the commercialization of production. After a brief examination of GH accumulations that are well characterized and appear to be models for future development and gas production, we analyze the role of numerical simulation in the assessment of the hydrate-production potential, identify the data needs for reliable predictions, evaluate the status of knowledge with regard to these needs, discuss knowledge gaps and their impact, and reach the conclusion that the numerical-simulation capabilities are quite advanced and that the related gaps either are not significant or are being addressed. We review the current body of literature relevant to potential productivity from different types of GH deposits and determine that there are consistent indications of a large production potential at high rates across long periods from a wide variety of hydrate deposits. Finally, we identify (a) features, conditions, geology and techniques that are desirable in potential production targets; (b) methods to maximize production; and (c) some of the conditions and characteristics that render certain GH deposits undesirable for production. Copyright ?? 2009 Society of Petroleum Engineers.

Conference Paper↗
USGS2011

Metadata for data rescue and data at risk

Scientific data age, become stale, fall into disuse and run tremendous risks of being forgotten and lost. These problems can be addressed by archiving and managing scientific data over time, and establishing practices that facilitate data discovery and reuse. Metadata documentation is integral to this work and essential for measuring and assessing high priority data preservation cases. The International Council for Science: Committee on Data for Science and Technology (CODATA) has a newly appointed Data-at-Risk Task Group (DARTG), participating in the general arena of rescuing data. The DARTG primary objective is building an inventory of scientific data that are at risk of being lost forever. As part of this effort, the DARTG is testing an approach for documenting endangered datasets. The DARTG is developing a minimal and easy to use set of metadata properties for sufficiently describing endangered data, which will aid global data rescue missions. The DARTG metadata framework supports rapid capture, and easy documentation, across an array of scientific domains. This paper reports on the goals and principles supporting the DARTG metadata schema, and provides a description of the preliminary implementation.

Conference Paper↗
USGS2012

On the use of wave parameterizations and a storm impact scaling model in National Weather Service Coastal Flood and decision support operations

National Weather Service (NWS) Weather Forecast Offices (WFO) are responsible for issuing coastal flood watches, warnings, advisories, and local statements to alert decision makers and the general public when rising water levels may lead to coastal impacts such as inundation, erosion, and wave battery. Both extratropical and tropical cyclones can generate the prerequisite rise in water level to set the stage for a coastal impact event. Forecasters use a variety of tools including computer model guidance and local studies to help predict the potential severity of coastal flooding. However, a key missing component has been the incorporation of the effects of waves in the prediction of total water level and the associated coastal impacts. Several recent studies have demonstrated the importance of incorporating wave action into the NWS coastal flood program. To follow up on these studies, this paper looks at the potential of applying recently developed empirical parameterizations of wave setup, swash, and runup to the NWS forecast process. Additionally, the wave parameterizations are incorporated into a storm impact scaling model that compares extreme water levels to beach elevation data to determine the mode of coastal change at predetermined “hotspots” of interest. Specifically, the storm impact model compares the approximate storm-induced still water level, which includes contributions from tides, storm surge, and wave setup, to dune crest elevation to determine inundation potential. The model also compares the combined effects of tides, storm surge, and the 2 % exceedance level for vertical wave runup (including both wave setup and swash) to dune toe and crest elevations to determine if erosion and/or ocean overwash may occur. The wave parameterizations and storm impact model are applied to two cases in 2009 that led to significant coastal impacts and unique forecast challenges in North Carolina: the extratropical “Nor'Ida” event during 11-14 November and the large swell event from distant Hurricane Bill on 22 August. The coastal impacts associated with Nor'Ida were due to the combined effects of surge, tide, and wave processes and led to an estimated 5.8 million dollars in damage. While the impacts from Hurricane Bill were not as severe as Nor'Ida, they were mainly associated with wave processes. Thus, this event exemplifies the importance of incorporating waves into the total water level and coastal impact prediction process. These examples set the stage for potential future applications including adaption to the more complex topography along the New England coast.

Conference Paper↗
USGS1970

Remote detection of geochemical soil anomalies

This paper describes a preliminary experiment that was made to compare the spectral reflectance from trees growing in soil over a mineral deposit with reflectance from trees of the same species growing in a nearby unmineralized area. Although the measurements were made on a relatively small number of trees, some significant differences were obtained and the over-all results are encouraging enough to warrant additional studies. Preliminary results suggest that measurement of spectral reflectance may become a dramatic new way of detecting geochemical soil anomalies by remote means in tree-covered areas.

Conference Paper↗