Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92Linked to original sources

Landsat 8–9 geometric and radiometric calibration and characterization

The U.S. Geological Survey Earth Resources Observation and Science Cal/Val (Calibration and Validation) Center of Excellence is a global leader in improving the accuracy, precision, and quality of remote-sensing data. Calibration is the process of quantitatively defining a system’s response to known and controlled signal inputs. Validation is the process of assessing, by independent means, the quality of the calibrated data products derived from system outputs. The Landsat Cal/Val team, comanaged by the Earth Resources Observation and Science Cal/Val Center of Excellence and the National Aeronautics and Space Administration Landsat Science Project, continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level, ensuring its reliability for scientific research. Landsat data quality is often referred to as the “gold standard” and gives other civil and commercial satellite programs a trusted reference point for measuring their own data quality. The Landsat program started more than 50 years ago. Since then, Landsat missions have gone through multiple technological advances, which, together with improved calibration and validation techniques, have led to higher data quality over time. The Cal/Val team also maintains consistency in data calibration across the multiple generations of sensors, which is vital to many scientists for time-series analysis.

Fact Sheet↗

The Great Lakes Geologic Mapping Coalition—Working collaboratively to understand the geology of the Great Lakes Region

Introduction The Great Lakes Geologic Mapping Coalition (GLGMC), commonly referred to as the “Coalition,” is a partnership between the U.S. Geological Survey (USGS), the U.S. States of Illinois, Indiana, Michigan, Minnesota, New York, Ohio, Pennsylvania, and Wisconsin and the Canadian province of Ontario. The member States receive funding for geologic mapping work from the USGS National Cooperative Geologic Mapping Program (NCGMP), whereas Ontario participates as a nonfunded partner. The mission of the GLGMC is to produce three-dimensional (3D) geologic maps that depict unconsolidated sediments and near-surface bedrock in the Great Lakes region of North America. Geologic maps are the basis of most earth science investigations and help support resource exploration (energy, minerals, groundwater), natural hazard mitigation, infrastructure development, and land-use planning, all of which can be used to advance economic development and strengthen national security in the Great Lakes region. During the last few million years, the Great Lakes region has experienced repeated glacial advances and retreats, leaving behind extensive sediments, abundant natural resources, and widespread effects on the underlying bedrock geology (Swezey and others, 2022). Linked by shared histories of past glaciations, industrial agriculture, and legacy automotive, coal, steel, and manufacturing industries, the GLGMC member States collaborate to improve the understanding of the 3D distribution of the sediments overlying the region’s bedrock (fig. 1). Developing a comprehensive subsurface 3D framework of this glaciated terrain can provide earth science data to policymakers at all levels. These insights facilitate informed decisions on the exploration, use, and protection of vital resources, such as critical minerals, industrial materials, and aquifers, thereby supporting economic prosperity and the well-being of the citizens of this region. Since its inception in 1998, the Coalition has completed more than 100 geologic mapping projects across the Great Lakes region. Each project aims to deliver geologic maps, 3D datasets, and other information that improves understanding of the geology of the Great Lakes region, with an emphasis on economic and water resources. Key deliverables include 3D geologic maps and models typically portraying sediment thickness, often derived from top-of-bedrock and borehole data. These products are developed through a combination of fieldwork, subsurface modeling, and the collection and analysis of rock and sediment cores. To support Coalition goals, member States collaborate with scientists working on related STATEMAP, EDMAP, and FEDMAP projects. Coalition scientists also engage with Tribal Nations in the Great Lakes region to ensure that Tribal interests pertaining to Coalition work are addressed. Through this collaboration, the Coalition unites the efforts of State, Federal, and Tribal Nation stakeholders to advance geologic data production and enhance understanding of the geologic resources of the Great Lakes region.

Illinois, Indiana, Michigan, Minnesota, New York, ↗

Utah Science Activities, Update 2010

The U.S. Geological Survey (USGS), a bureau of the U.S. Department of the Interior, serves the Nation by providing reliable scientific information to describe and understand the Earth; minimize loss of life and property from natural disasters; manage water, biological, energy, and mineral resources; and enhance and protect our quality of life. The USGS has become a world leader in the natural sciences thanks to our scientific excellence and responsiveness to society's needs. This newsletter describes some of the current and recently completed USGS earth-science activities in Utah. As an unbiased, multi-disciplinary science organization that focuses on biology, geography, geology, and water, we are dedicated to the timely, relevant, and impartial study of the landscape, our natural resources, and the natural hazards that threaten us. Learn more about our goals and priorities for the coming decade in the USGS Science Strategy at http://www.usgs.gov/science_strategy/ .

General Information Product↗

GloVis

The Global Visualization Viewer (GloVis) trifold provides basic information for online access to a subset of satellite and aerial photography collections from the U.S. Geological Survey Earth Resources Observation and Science (EROS) Center archive. The GloVis (http://glovis.usgs.gov/) browser-based utility allows users to search and download National Aerial Photography Program (NAPP), National High Altitude Photography (NHAP), Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER), Earth Observing-1 (EO-1), Global Land Survey, Moderate Resolution Imaging Spectroradiometer (MODIS), and TerraLook data. Minimum computer system requirements and customer service contact information also are included in the brochure.

General Information Product↗

Chesapeake Bay impact structure: A blast from the past

About 35 million years ago, a 2-mile-wide meteorite smashed into Earth in what is now the lower Chesapeake Bay in Virginia. The oceanic impact vaporized, melted, fractured, and displaced rocks and sediments and sent billions of tons of water, sediments, and rocks into the air. Glassy particles of solidified melt rock rained down as far away as Texas and the Caribbean. Large tsunamis affected most of the North Atlantic basin. The resulting impact structure is more than 53 miles wide and has a 23-mile-wide, filled central crater surrounded by collapsed sediments. Now buried by hundreds of feet of younger sediments, the Chesapeake Bay impact structure is among the 20 largest known impact structures on Earth. Since its discovery in the early 1990s, scientists have conducted deep drilling and geophysical surveys of the impact structure to find out more about its size, composition, structure, age, and biological effects and to understand its lingering influences on the regional groundwater system. These efforts culminated in the drilling of a 1-mile-deep, continuously sampled corehole in 2005 by an international group of scientists and agencies.

Chesapeake Bay↗

The life cycle of a mineral deposit: a teacher's guide for hands-on mineral education activities

This teacher's guide defines what a mineral deposit is and how a mineral deposit is identified and measured, how the mineral resources are extracted, and how the mining site is reclaimed; how minerals and mineral resources are processed; and how we use mineral resources in our every day lives. Included are 10 activitybased learning exercises that educate students on basic geologic concepts; the processes of finding, identifying, and extracting the resources from a mineral deposit; and the uses of minerals. The guide is intended for K through 12 Earth science teachers and students and is designed to meet the National Science Content Standards as defined by the National Research Council (1996). To assist in the understanding of some of the geology and mineral terms, see the Glossary (appendix 1) and Minerals and Their Uses (appendix 2). The process of finding or exploring for a mineral deposit, extracting or mining the resource, recovering the resource, also known as beneficiation, and reclaiming the land mined can be described as the “life cycle” of a mineral deposit. The complete process is time consuming and expensive, requiring the use of modern technology and equipment, and may take many years to complete. Sometimes one entity or company completes the entire process from discovery to reclamation, but often it requires multiple groups with specialized experience working together. Mineral deposits are the source of many important commodities, such as copper and gold, used by our society, but it is important to realize that mineral deposits are a nonrenewable resource. Once mined, they are exhausted, and another source must be found. New mineral deposits are being continuously created by the Earth but may take millions of years to form. Mineral deposits differ from renewable resources, such as agricultural and timber products, which may be replenished within a few months to several years.

General Information Product↗

Land change monitoring, assessment, and projection (LCMAP) revolutionizes land cover and land change research

When nature and humanity change Earth’s landscapes - through flood or fire, public policy, natural resources management, or economic development - the results are often dramatic and lasting. Wildfires can reshape ecosystems. Hurricanes with names like Sandy or Katrina will howl for days while altering the landscape for years. One growing season in the evolution of drought-resistant genetics can transform semiarid landscapes into farm fields. In the past, valuable land cover maps created for understanding the effects of those events - whether changes in wildlife habitat, water-quality impacts, or the role land use and land cover play in affecting weather and climate - came out at best every 5 to 7 years. Those high quality, high resolution maps were good, but users always craved more: even higher quality data, additional land cover and land change variables, more detailed legends, and most importantly, more frequent land change information. Now a bold new initiative called Land Change Monitoring, Assessment, and Projection (LCMAP) promises to fulfill that demand. Developed at the U.S. Geological Survey (USGS) Earth Resources Observation and Science (EROS) Center in Sioux Falls, South Dakota, LCMAP provides definitive, timely information on how, why, and where the planet is changing. LCMAP’s continuous monitoring process can detect changes as they happen every day that Landsat satellites acquire clear observations. The result will be to place near real-time information in the hands of land and resource managers who need to understand the effects these changes have on landscapes.

General Information Product↗

Water cycle processes [poster]

Description The water cycle describes how water moves from Earth’s surface into the atmosphere, then back to the surface again or to below Earth’s surface. This educational poster depicts five key water-cycle processes that transport or transform water between states: evaporation, transpiration, condensation, precipitation, and infiltration. It illustrates examples of natural and human interactions with these processes. This poster is intended for eighth-grade audiences.

General Information Product↗

Geologic map of the Palo Alto and part of the Redwood Point 7-1/2' quadrangles, San Mateo and Santa Clara Counties, California

The Palo Alto and southern part of the Redwood Point 7-1/2' quadrangles cover an area on the San Francisco peninsula between San Francisco Bay and the Santa Cruz Mountains. San Francisquito and Los Trancos Creeks, in the southeastern part of the map area, form the boundary between San Mateo and Santa Clara Counties. The area covered by the geologic map extends from tidal and marsh lands at the edge of the bay southward across a gently sloping alluvial plain to the foothills of the northern Santa Cruz Mountains. The foothills are separated from the main mass of the mountains by two northwest-striking faults, the San Andreas and Pilarcitos, that cross the southwest corner of the map area (fig. 1). The map and adjoining areas are here divided into three structural blocks juxtaposed along these faults, adopting the scheme of Nilsen and Brabb (1979): (1) the San Francisco Bay block lying east of the San Andreas Fault Zone; (2) the Pilarcitos block lying between the San Andreas and Pilarcitos Faults; and (3) the La Honda block that includes the main mass of the Santa Cruz Mountains lying west of the Pilarcitos Fault. The west boundary of the La Honda block is the Seal Cove-San Gregorio Fault. Pre-late Pleistocene Cenozoic rocks of the foothills have been compressed into northwest-striking folds, which have been overridden by Mesozoic rocks along southwest-dipping low-angle faults. Coarse- to fine-grained upper Pleistocene and Holocene alluvial and estuarine deposits, eroded from the foothills and composing the alluvial plain, are essentially undeformed. Most of the alluvial plain, including some parts of the marsh land that borders the bay, has been covered by residential and commercial developments, and virtually all of the remaining marsh land has been diked off and used as salt evaporating ponds. The map area includes parts of the municipalities of San Carlos, Redwood City, Atherton, Woodside, Portola Valley, Menlo Park, and East Palo Alto in San Mateo County; and Palo Alto, Stanford University, Los Altos, and Los Altos Hills in Santa Clara County (fig. 2). Much of the university land remains as undeveloped open space surrounded by densely urbanized lands. Geologic maps of all or part of the present map area have been prepared previously by Branner and others (1909), Thomas (1949), Dobbs and Forbes (1960), Dibblee (1966), Page and Tabor (1967), Pampeyan (1970a, 1970b), Beaulieu (1970), Helley and others (1979), and by numerous Stanford University students working on topical earth science problems. In addition, numerous engineering geologic studies have been conducted for site investigations relating to residential and commercial developments and, in particular, for construction of the Stanford Linear Accelerator Center (SLAC). The reports pertaining to SLAC are summarized in Skjei and others (1965) and more recently in a report by Earth Sciences Associates (1983). The interested reader is referred to Brabb and Pampeyan (1983), Brabb and others (1982), Wentworth and others (1985), Wieczorek and others (1985), Thomson and Evernden (1986), Brabb and Olson (1986), Youd and Perkins (1987), Perkins (1987), and Mark and Newman (1988) for information pertaining to geology, history, slope stability, seismic shaking, liquifaction potential, and faulting and seismicity in San Mateo County, some of which can be applied directly to northern Santa Clara County. Field work for the present geologic map was done in 1962-1964 and 1966 when SLAC and Interstate 280 were in early stages of construction. Only minor additions and revisions have been made since this mapping was first released (Pampeyan, 1970a; 1970b) as it was impractical to keep pace with accelerating urban development of the area. Geologic units of the flatlands area are largely adapted from Helley and Lajoie (1979).

California↗

Coastal-Change and Glaciological Map of the Larsen Ice Shelf Area, Antarctica, 1940-2005

Changes in the area and volume of polar ice sheets are intricately linked to changes in global climate, and the resulting changes in sea level could severely impact the densely populated coastal regions on Earth. Antarctica is Earth's largest reservoir of glacial ice. Melting of the West Antarctic part alone of the Antarctic ice sheet would cause a sea-level rise of approximately 6 meters (m), and the potential sea-level rise after melting of the entire Antarctic ice sheet is estimated to be 65 m (Lythe and others, 2001) to 73 m (Williams and Hall, 1993). The mass balance (the net volumetric gain or loss) of the Antarctic ice sheet is highly complex, responding differently to different climatic and other conditions in each region (Vaughan, 2005). In a review paper, Rignot and Thomas (2002) concluded that the West Antarctic ice sheet is probably becoming thinner overall; although it is known to be thickening in the west, it is thinning in the north. The mass balance of the East Antarctic ice sheet is thought by Davis and others (2005) to be positive on the basis of the change in satellite-altimetry measurements made between 1992 and 2003. Measurement of changes in area and mass balance of the Antarctic ice sheet was given a very high priority in recommendations by the Polar Research Board of the National Research Council (1986), in subsequent recommendations by the Scientific Committee on Antarctic Research (SCAR) (1989, 1993), and by the National Science Foundation's (1990) Division of Polar Programs. On the basis of these recommendations, the U.S. Geological Survey (USGS) decided that the archive of early 1970s Landsat 1, 2, and 3 Multispectral Scanner (MSS) images of Antarctica and the subsequent repeat coverage made possible with Landsat and other satellite images provided an excellent means of documenting changes in the cryospheric coastline of Antarctica (Ferrigno and Gould, 1987). The availability of this information provided the impetus for carrying out a comprehensive analysis of the glaciological features of the coastal regions and changes in ice fronts of Antarctica (Swithinbank, 1988; Williams and Ferrigno, 1988). The project was later modified to include Landsat 4 and 5 MSS and Thematic Mapper (TM) images [and in some areas Landsat 7 Enhanced Thematic Mapper Plus (ETM+) images], RADARSAT images, aerial photography, and other data where available, to compare changes that occurred during a 20- to 25- or 30-year time interval (or longer where data were available, as in the Antarctic Peninsula). The results of the analysis are being used to produce a digital database and a series of USGS Geologic Investigations Series Maps (I-2600) (Williams and others, 1995; Ferrigno and others, 2002; and Williams and Ferrigno, 2005) (available online at http://www.glaciers.er.usgs.gov).

IMAP↗

Coastal-Change and Glaciological Map of the Palmer Land Area, Antarctica: 1947-2009

Reduction in the area and volume of the two polar ice sheets is intricately linked to changes in global climate, and the resulting rise in sea level could severely impact the densely populated coastal regions on Earth. Antarctica is Earth's largest reservoir of glacial ice. Melting of the West Antarctic part alone of the Antarctic ice sheet would cause a sea-level rise of approximately 6 meters (m), and the potential sea-level rise after melting of the entire Antarctic ice sheet is estimated to be 65 m (Lythe and others, 2001) to 73 m (Williams and Hall, 1993). The mass balance (the net volumetric gain or loss) of the Antarctic ice sheet is highly complex, responding differently to different climatic and other conditions in each region (Vaughan, 2005). In a review paper, Rignot and Thomas (2002) concluded that the West Antarctic ice sheet is probably becoming thinner overall; although it is known to be thickening in the west, it is thinning in the north. The mass balance of the East Antarctic ice sheet is thought by Davis and others (2005) to be positive on the basis of the change in satellite-altimetry measurements made between 1992 and 2003. Measurement of changes in area and mass balance of the Antarctic ice sheet was given a very high priority in recommendations by the Polar Research Board of the National Research Council (1986), in subsequent recommendations by the Scientific Committee on Antarctic Research (SCAR) (1989, 1993), and by the National Science Foundation's (1990) Division of Polar Programs. On the basis of these recommendations, the U.S. Geological Survey (USGS) decided that the archive of early 1970s Landsat 1, 2, and 3 Multispectral Scanner (MSS) images of Antarctica and the subsequent repeat coverage made possible with Landsat and other satellite images provided an excellent means of documenting changes in the cryospheric coastline of Antarctica (Ferrigno and Gould, 1987). The availability of this information provided the impetus for carrying out a comprehensive analysis of the glaciological features of the coastal regions and changes in ice fronts of Antarctica (Swithinbank, 1988; Williams and Ferrigno, 1988). The project was later modified to include Landsat 4 and 5 MSS and Thematic Mapper (TM) images (and in some areas Landsat 7 Enhanced Thematic Mapper Plus (ETM+) images), RADARSAT images, aerial photography, and other data where available, to compare changes that occurred during a 20- to 25- or 30-year time interval (or longer where data were available, as in the Antarctic Peninsula). The results of the analysis are being used to produce a digital database and a series of USGS Geologic Investigations Series Maps (I-2600) (Williams and others, 1995; Swithinbank and others, 2003a,b, 2004; Ferrigno and others, 2002, 2005, 2006, 2007, 2008, and in press; and Williams and Ferrigno, 2005) (available online at http://www.glaciers.er.usgs.gov).

IMAP↗

Geologic Maps of the Dardanus Sulcus (Jg-6), Misharu (Jg-10), Nabu (Jg-11), and Namtar (Jg-14) Quadrangles of Ganymede

Ganymede is the largest (~5,200 km diameter) of the Jovian satellites. Surficial features on Ganymede, as recorded by the Voyager 1 and 2 spacecraft (Smith and others, 1979a; 1979b), indicate a complex history of crustal formation. Several episodes of crustal modification led to the formation of curvilinear systems of furrows in dark terrain, the emplacement of light materials, and the creation of grooves in light terrain. Prior to exploration of the Jovian system by spacecraft, Earth-based observations established that the surface of Ganymede is dominated by water ice with various admixtures of fine silicate (rock) material (Pilcher and others, 1972; Sill and Clark, 1982). No agreement yet exists as to the amount of water in the near surface material; early estimates based on spectral reflectance data suggested that half the surface was covered by nearly pure water ice, whereas later studies by Clark (1981) indicated that up to 95% of the surface could be water ice and still be consistent with spectroscopic data. The Pioneer encounters with the Jovian system in 1973 and 1974 confirmed that Ganymede was made up of patches of light and dark terrain but did not have the spatial resolution needed to determine the percent cover of water ice, or geologic relations of surface materials. Not until the Voyager encounters was the surface seen with sufficient detail to enable geologic mapping. On the basis of albedo contrasts, surface morphology, crater density, and superposition relations, geologic mapping was done using principles and techniques that have been applied to the Earth, Moon, and other terrestrial planets (Wilhelms, 1972). Considerable uncertainty exists in applying such methods to bodies having icy crusts, as the internal processes that produce their surface configurations are poorly understood, and the resolution of the Voyager images is barely sufficient to show the detail required to interpret structural and stratigraphic relations. With the exception of the extreme southeastern portion of the Namtar quadrangle (Jg- 14), all images used for mapping were taken by Voyager 1. At the time of encounter, the eastern portion of the Misharu (Jg–10) and Namtar quadrangles were near the terminator, making it difficult to distinguish albedo variations best seen at high sun angles. The western quadrangles were imaged at resolutions of 2–5 km/pixel (Batson and others, 1980) from an oblique angle, so albedo variations can be seen, but topography and morphology are not well expressed in the images.

IMAP↗

Mineral resource potential map of the Savannah Roadless Area, Liberty County, Florida

The Savannah Roadless Area is underlain by sedimentary rocks having low potential for oil and gas and minerals. The low potential for oil or gas notwithstanding, the possibilities for discovery cannot be ruled out because the area and nearby lands have not been thoroughly explored. No minerals have been mined within the Savannah Roadless Area, and the only production nearby has been the digging of clayey sand used in stabilizing U.S. Forest Service roads. Fuller's earth, quartz sand and gravel, clayey sand, and common clay presently are produced elsewhere in the region, and limestone and peat have been produced in the past. No clay suitable for structural clay products or fuller's earth is present in the roadless area; however, a bed of quartz sand and gravel of excellent quality was penetrated at a depth interval of 37-50 ft by one drill hole. Although this bed is coarser grained-and therefore is more suitable for many uses-than the sand deposits worked elsewhere in the Big Bend region, its mineral resource potential is reduced by the thickness of overburden above it and by its distance from markets in population centers. The Apalachicola National Forest has been explored for phosphate and reconnoitered for heavy minerals, but no valuable deposits of either have been found.

Florida↗

Mineral resource potential map of the Fossil Ridge Wilderness Study Area, Gunnison County, Colorado

Parts of the Fossil Ridge Wilderness Study Area have a high resource potential for gold and silver in small deposits, uranium in medium-size deposits, and high-calcium limestone in large deposits. Parts have a moderate to high potential for uranium, thorium, and light rare-earth elements in small- to medium-size deposits, a moderate potential for copper, lead, and zinc in small deposits, a low potential for molybdenum in small deposits, and an unknown potential for molybdenum in deposits of unknown size. Parts of the area have a low potential for cobalt, chromium, tungsten, beryllium, boron, and tin in small deposits. And, depending on the extraction of precious metals, parts of the area could have a low potential for arsenic in small deposits. Tungsten, rare-earth elements, and tin could not be considered resources except for coexisting base metals, thorium, and uranium. Areas that immediately adjoin the Fossil Ridge Wilderness Study Area have a high potential for molybdenum in large deposits, lead in medium-size deposits, and zinc -in small- to medium-size deposits. Depending on the extraction of base metals, parts of the adjoining areas could have a low resource potential for bismuth and cadmium as byproducts in medium-size deposits.

Colorado↗

Map showing recent and historic landslide activity on coastal bluffs of Puget Sound between Shilshole Bay and Everett, Washington

Many landslides occurred on the coastal bluffs between Seattle and Everett, Washington during the winters of 1996 and 1997. Shallow earth slides and debris flows were the most common, but a few deep-seated rotational earth slides also occurred. The landslides caused significant property damage and interfered with rail traffic; future landslides in the area pose significant hazards to property and public safety. Field observations indicate that ground-water seepage, runoff concentration, and dumping at the tops of the bluffs all contributed to instability of the bluffs. Most landslides in the study area occurred in colluvium, residuum, and landslide deposits derived from the Vashon Drift, particularly the advance outwash. In the northern part of the area, colluvium derived from the Pleistocene Whidbey Formation was also involved in shallow landslides. Comparison of recent activity with historic records in the southern part of the map area indicates that landslides tend to occur in many of the same areas as previous landslides.

Washington↗

Preliminary photointerpretation map of landslide and other surficial deposits of the Mount Hamilton quadrangle and parts of the Mount Boardman and San Jose quadrangles, Alameda and Santa Clara Counties, California

The nine San Francisco Bay region counties lie within a geologically active, young, and dynamic part of the central and northern Coast Ranges of California. Significant movements of the earth's crust are occurring here at the present time, posing numerous problems to urbanization, including some of special concern. Geological processes such as fault movements, earthquakes, land subsidence, landsliding, slow downslope movement of bedrock and surficial materials, coastal and stream erosion, flooding, and sedimentation are all potentially hazardous. Because of these factors, an understanding of the operation of physical processes in the bay region is desirable for harmonious, efficient, and safe land-use planning, particularly now, with greatly expanded pressures for urban growth. This map presents preliminary information about one aspect of the physical environment necessary to sound land-use planning--the nature and distribution of surficial deposits. Because surficial deposits are common and well developed in much of the bay region, it is useful to know how and why they have formed, as well as what properties they possess. When maps like this are used in combination with other types of environmental information, such as data on soils, bedrock geology, slopes, vegetation, climatic variation, seismic response, and hydrology, it should be easier to arrive at sound decisions regarding the physical aspects of land use. The U.S. Geological Survey is studying many of these factors in the bay region and hopes to provide the community with much of the required information as part of its San Francisco Bay Region Study in cooperation with the Department of Housing and Urban Development. The representation of surficial deposits on this map reflects the way in which a geologist, working exclusively with aerial photographs, interpreted the origin of various elements of the present landscape. The deposits shown here have not been examined in the field. However, by viewing overlapping vertical aerial photographs through a stereoscope, the geologist sees a three-dimensional relief model of the ground surface and can study and interpret the origins of landforms with considerable ease. In fact, for mapping surficial deposits, particularly in reconnaissance-type studies, photointerpretation has advantages over both ground observations and laboratory studies of surficial materials. Of course, better information can be provided when all aspects of the study are integrated. These preliminary photointerpretation maps are only the first stage in a detailed study of surficial deposits in the bay region, but they should provide land-use planners with immediately useful information about the regional distribution of landslide and other surficial deposits. This map indicates the dominant surficial processes that have probably been operative by showing the distribution of different types of surficial deposits. Processes such as weathering, erosion, sedimentation, and the slow as well as rapid downslope movement of earth materials have constantly reshaped the land surface in the past and will continue to in the future, although at varying rates. The processes are interrelated to varying degrees. For example, crustal uplift of the Coast Ranges will lead to increased erosion and downcutting by streams that in turn generally results in increased deposition of sediments in river valleys, lakes, and shoreline areas. Older flood planes and river deposits may be eroded, leaving elevated terrace deposits. In addition, downcutting by streams may cause adjacent slopes to become unstable, thereby increasing the possibility of slope failures. Man's activities can alter natural physical processes in many ways. Simple acts such as overwatering a lawn or placing a septic tank drainfield in ground that is marginally stable may weaken the bedrock and surficial materials enough to induce landsliding. Relatively stable areas may be made unstable as a result of construction activities that involve cutting or oversteepening of natural slopes. Engineers, builders, conservationists, and others concerned with land use must evaluate the potential effects of all types of development, and maps that show the nature and distribution of surficial deposits should provide much of the basic information they need. This map, then, shows the cumulative effects of various processes that have yielded surficial deposits up to the time the photographs used for photointerpretation were taken. It does not indicate directly areas where processes will be most active, nor does it show the rate at which they will operate. However, knowledge of the history of geologic events is a key to understanding and predicting the evolution of an area, even where man's activities significantly change the character of the land. Almost all new landslides, for example, occur in areas with a history of landslide activity.

California↗

Geologic map of bastnaesite deposits, Birthday claims, San Bernardino County, California

In April 1949 a deposit containing considerable quantities of the rare mineral bastnaesite - the fluorocarbonate of cerium, lanthanum, and other rare earths - was discovered near Mountain Pass, San Bernardino County, Calif. Small quantities of bastnaesite have been found in several places in the United States, but this area is the first that offers promise of being a commercial source of cerium, lanthanum, and other rare earths.

California↗

A bibliography of terrain modeling (geomorphometry), the quantitative representation of topography: Supplement 4.0

Terrain modeling, the practice of ground-surface quantification, is an amalgam of Earth science, mathematics, engineering, and computer science. The discipline is known variously as geomorphometry (or simply morphometry), terrain analysis, and quantitative geomorphology. It continues to grow through myriad applications to hydrology, geohazards mapping, tectonics, sea-floor and planetary exploration, and other fields. Dating nominally to the co-founders of academic geography, Alexander von Humboldt (1808, 1817) and Carl Ritter (1826, 1828), the field was revolutionized late in the 20th Century by the computer manipulation of spatial arrays of terrain heights, or digital elevation models (DEMs), which can quantify and portray ground-surface form over large areas (Maune, 2001). Morphometric procedures are implemented routinely by commercial geographic information systems (GIS) as well as specialized software (Harvey and Eash, 1996; Köthe and others, 1996; ESRI, 1997; Drzewiecki et al., 1999; Dikau and Saurer, 1999; Djokic and Maidment, 2000; Wilson and Gallant, 2000; Breuer, 2001; Guth, 2001; Eastman, 2002). The new Earth Surface edition of the Journal of Geophysical Research, specializing in surficial processes, is the latest of many publication venues for terrain modeling. This is the fourth update of a bibliography and introduction to terrain modeling (Pike, 1993, 1995, 1996, 1999) designed to collect the diverse, scattered literature on surface measurement as a resource for the research community. The use of DEMs in science and technology continues to accelerate and diversify (Pike, 2000a). New work appears so frequently that a sampling must suffice to represent the vast literature. This report adds 1636 entries to the 4374 in the four earlier publications1. Forty-eight additional entries correct dead Internet links and other errors found in the prior listings. Chronicling the history of terrain modeling, many entries in this report predate the 1999 supplement. Coverage is representative from about 1800 through early–mid 2002. Papers increasingly are published exclusively or in duplicate on the Internet's World Wide Web; the dates given here for Web addresses (URLs) that lack a print publication indicate a Web site's last update or my last access of it. The bibliography is arranged alphabetically and thus is not readily summarized. This introduction cites about 500 entries, a third of them grouped under 24 morphometric topics, as a guide to the listing's contents. Continuing the practice of previous bibliographies in the series to provide more information on a few applications (see summary of past topics in Pike, 2000a), this report elaborates further on topographic data, putative new parameters, tectonic geomorphology/neo-orometry, biogeography, ice-cap morphometry, results from the Mars Global DEM, landslide-hazard mapping, terrain modeling as physics, Hack's law, and broad-scale computer visualization. The literature of some of these subjects is large, and none of the summaries is intended to more than introduce the topic and comment on some of the current contributions of terrain modeling. Closing the essay is a discussion of pre-1900 papers that trace the evolution of ridge-line and watercourse quantification by descriptive geometry, as well as comments on some new books and an on-line bulletin board.

Open-File Report↗