Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Surveys in Geophysics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91Linked to original sources
USGS2021

Hydrogeologic framework, water levels, and selected contaminant concentrations at Valmont TCE Superfund Site, Luzerne County, Pennsylvania, 2020

The Valmont TCE Superfund Site, Luzerne County, Pennsylvania is underlain by fractured and folded sandstones and shales of the Pottsville and Mauch Chunk Formations, which form a fractured-rock aquifer recharged locally by precipitation. Industrial activities at the former Chromatex Plant resulted in trichloroethene (TCE) contamination of groundwater at and near the facility, which was identified in 1987 and led to listing as a Superfund site by the U.S. Environmental Protection Agency (EPA) in 1989. To address the problem of TCE concentrations in nearby residential wells that exceed the maximum contaminant level (MCL) of 5 micrograms per liter (μg/L), alternate water supplies were provided. A 2015 review of initial characterization and subsequent remediation by the EPA identified the need for an updated understanding of the complex hydrogeology and the conceptual site model. Additional contaminants present in groundwater at the site include some other volatile organic compounds (VOCs) and per- and polyfluoroalkyl substances (PFAS), predominantly consisting of perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS) present in concentrations that exceeded the EPA Health Advisory (HA) level of 5 nanograms per liter (ng/L) for combined PFOA and PFOS. In response to a request from the EPA in 2019, the U.S. Geological Survey (USGS) prepared cross sections and maps to provide more information about the hydrogeologic framework at and near the site and assist in improving the conceptual site model using water level and contaminant data collected by the EPA in 2020. The cross sections present lithologic correlations from available geophysical logs collected in wells from 2002 to 2014; they show alternating intervals of relatively elevated and reduced natural gamma activity that correspond to changes in lithology, with water-bearing zones and well screens commonly located at lithologic contacts, sometimes near thin coal seams. Water-bearing zones commonly are associated with fractures at or near lithologic contacts but also may be associated with fractures at or near apparent faulting. Recent (March 2020) water-level data shown on cross sections and maps indicate large downward vertical gradients and apparent radial gradients laterally to the northeast, northwest, and southwest that generally following topography. Recent (February to March 2020) data for TCE groundwater concentration shown on cross sections and maps indicate the highest TCE concentrations (greater than 3,000 μg/L and as much as 75,000 μg/L) and combined PFOA and PFOS concentrations (greater than 1,000 ng/L and up to at least 2,350 ng/L) are from shallow (less than 60 feet [ft] below land surface [bls]) and intermediate depth (60 to 100 ft bls) wells near the center of the former Chromatex Plant. TCE and PFAS (as combined PFOA and PFOS) contamination is present at greater depths, as much as 304 ft bls, as evidenced by samples collected from one well (a reconstructed former production well) near the plant, that contained concentrations of about 240 μg/L and 508 ng/L, respectively. The 2020 data also indicate that TCE and PFAS concentrations which exceed drinking-water MCL or HA levels are present in groundwater depths of less than 200 ft in an area that extends predominantly in a northeast direction from the former Chromatex Plant, and is apparently influenced by hydraulic gradients, lithology, and geologic structure.

Pennsylvania↗
USGS2022

Aqueous geochemistry of waters and hydrogeology of alluvial deposits, Pinnacles National Park, California

A cooperative study between the National Park Service (NPS) and the U.S. Geological Survey (USGS) characterized groundwater quality and hydrogeology in parts of Pinnacles National Park. The water-quality investigation assessed the geochemistry of springs, wells, surface water, and precipitation and analyzed geochemistry of rock formations that affect the water chemistry through water-rock interaction. The hydrogeology investigation used geophysical and groundwater level data to characterize groundwater-flow processes in the alluvial deposits of Bear Valley and the Chalone Creek watershed. Analysis of aqueous geochemical parameters in water samples from perennial springs, water-supply wells, and surface waters was conducted for samples collected after the dry season (autumnal) and after the wet season (vernal) to assess changes in geochemistry due to changes in groundwater levels or flow resulting from precipitation. The chemistry of bulk precipitation collected during the wet season was also analyzed. Bedrock samples were analyzed for geochemical parameters to help constrain groundwater sources, flow paths, and weathering. The geochemical investigations show a correspondence between the source rock and the spring-water chemistry that can be attributed to the mineralogy of the source rock. The narrow range of strontium isotopes in water samples, sourced in geochemically and mineralogically disparate rocks, indicates that the bedrock groundwater is relatively old and has reached quasi-steady state with respect to weathering of susceptible minerals. Groundwater-level monitoring indicated that the water table is shallow—from 0 to 10 meters (m) below land surface. In southern Bear Valley and in the Chalone Creek alluvium, water levels rose and declined by several meters over each annual cycle of this study. In northern Bear Valley, water levels rose modestly over two wet seasons but declined during a third wet season. In Bear Valley, groundwater/surface-water interaction occurs along the perennial reach of Sandy Creek. Groundwater discharges to the upstream part of the reach, becomes surface water and is partly consumed by evapotranspiration, and infiltrates farther downstream. In the Chalone Creek alluvium, runoff-generated surface-water flow in intermittent stream reaches is a major component of groundwater recharge. After the onset of significant streamflow, creek water rapidly recharges groundwater until water levels rise to nearly the creek level. Groundwater levels generally remain high throughout the wet season, then gradually decline after the creek becomes dry.

California↗
USGS1977

Summary of results from electromagnetic and galvanic soundings on Kilauea Iki lava lake, Hawaii

The purpose of this report is to summarize various electrical sounding studies made on the Kilauea Iki lava lake and to present some of the preliminary interpretations that resulted from the measurements. The following discussion is not intended as a complete interpretation, but is intended to summarize the major points made in an invited oral presentation at the American Geophysical Union fall meeting held in San Francisco, Calif. on December 6, 1976. This paper was part of a group of papers dealing with various geophysical studies recently made on the Kilauea Iki lava lake. A general plan map of Kilauea Iki lava lake is shown in figure 1. Electromagnetic (EM) loop-loop soundings, D.C. resistivity soundings, and VLF apparent resistivity measurements were made on the lave lake surface. All of these surveys were made to determine the geoelectric structure of the lava lake and to determine parameters of the molten basaltic lens that exist in the partially solidified lava lake.

Hawaii↗
USGS2012

Borehole geophysical, fluid, and hydraulic properties within and surrounding the freshwater/saline-water transition zone, San Antonio segment of the Edwards aquifer, south-central Texas, 2010-11

The freshwater zone of the San Antonio segment of the Edwards aquifer is used by residents of San Antonio and numerous other rapidly growing communities in south-central Texas as their primary water supply source. This freshwater zone is bounded to the south and southeast by a saline-water zone with an intermediate zone transitioning from freshwater to saline water, the transition zone. As demands on this water supply increase, there is concern that the transition zone could potentially move, resulting in more saline water in current supply wells. Since 1985, the U.S. Geological Survey (USGS), San Antonio Water System (SAWS), and other Federal and State agencies have conducted studies to better understand the transition zone. During 2010 and 2011, the USGS, in cooperation with SAWS, conducted a study to further assess the potential for movement of the transition zone in part of the San Antonio segment of the Edwards aquifer. Equivalent freshwater heads were computed to investigate the transition from saline to freshwater zones in the San Antonio segment and evaluate the potential for lateral flow at the freshwater/saline-water interface. Data were collected within and surrounding the transition zone from 13 wells in four transects (East Uvalde, Tri-County, Fish Hatchery, and Kyle). Hydraulic head and geophysical log data were used to calculate equivalent freshwater heads and then analyzed to identify possible horizontal gradients across the transition zone and thus flow. Unlike previous studies that used indirect methods to calculate fluid conductivity from fluid resistivity, in this study geophysical tools that directly measured fluid conductivity were used. Electromagnetic (EM) flowmeter logs were collected under both ambient and stressed (pumping) conditions and were processed to identify vertical flow zones within the borehole. The San Antonio segment of the Edwards aquifer (the study area) is about 175 miles long and extends from the western groundwater divide near Brackettville in Kinney County to the eastern groundwater divide near Kyle in Hays County. The four transects consist of two to five wells per transect and were configured approximately perpendicular to and across the expected trace of the freshwater/saline-water interface. The deep flow zone indicated by the EM flowmeter data for East Uvalde transect well EU2 corresponds directly with a large, negative deflection of the fluid logs, indicating an inflow of fresher water from the Devils River Limestone. To the southwest, towards the freshwater/saline-water interface, this same flow zone was observed in well EU1, but with a reduction of flow, and displayed no apparent fluid curve deflections. The highest observed transmissivity of the study area was observed in the saline zone of the Tri-County transect, at well TC3, which had a total transmissivity of 24,900 square feet per day. Zones of high transmissivity throughout the study site were observed to not be continuous and are likely caused by localized secondary porosity such as intersecting faults or karst features. Although analyses of daily mean equivalent freshwater heads for the East Uvalde transect indicated that the gradient across the freshwater/saline-water interface varied between into and out of the freshwater zone, the data indicate that there was a slightly longer period during which the gradient was out of the freshwater zone. Analyses of all daily mean equivalent freshwater heads for the Tri-County transect indicated that the lateral-head gradients across the freshwater/saline-water interface were typically mixed (not indicative of flow into or out of freshwater zone). Assessment of the daily mean equivalent freshwater heads indicated that, although the lateral-head gradient at the Kyle transect varied between into and out of the freshwater zone, the lateral-head gradient was typically from the transition zone into the freshwater zone.

Texas↗
USGS2009

GPS: Applications for measuring tectonic and fault-related deformation

The Global Positioning System (GPS) is a space-based Global NavigationSatellite System (GNSS). Using signals transmitted by GPS satellites, the positions of ground‐based receivers can be calculated to high precision,making it possible to track the movement of points on the Earth's surface over time. Unlike older geodetic surveying methods which involved periodicallymeasuring angles, distances, or elevations between points, GPS can provide three‐component (latitude, longitude, and altitude) position informationat a range of sampling rates and on a global scale. GPS equipment is easy to use and can be set up to collect data continuously. Since itsearly geophysical applications in the mid-1980s, this versatile tool, which can be used to track displacements over time periods of seconds to decades,has become indispensable for crustal deformation studies, leading to many important insights and some surprising discoveries.

Book chapter↗
USGS2002

Lithologic and ground-water data for monitoring sites in the Mojave River and Warren Valley basins, San Bernardino County, California, 1992-1998

Lithologic and ground-water data were collected at 85 monitoring sites constructed in the Mojave Water Agency Management area in San Bernardino County, California, as part of a series of cooperative studies between the U.S. Geological Survey and the Mojave Water Agency. The data are being used to evaluate and address water-supply and water-quality issues. This report presents a compilation of the data collected at these sites from 1992 through 1998, including location and design of the monitoring sites, lithologic data, geophysical logs, ground-water-level measurements, and water-quality analyses.One to five small (generally 2-inch) diameter wells were installed at each of the 85 monitoring sites to collect depth-dependent hydrologic data. Lithologic logs were compiled from descriptions of drill cuttings collected at each site and from observations recorded during the drilling of the borehole. Generalized stratigraphic columns were compiled by grouping similar lithologic units. Geophysical logs provide information on the character of the lithologic units and on the presence of ground water and the chemical characteristics of that water. Water-level and water-quality data were collected periodically from the sites during 1992 through 1998.

Open-File Report↗
USGS1980

Preliminary aeromagnetic map of the Charlotte 1 x 2 degree quadrangle, North Carolina, South Carolina

The aeromagnetic map of the Charlotte 1 x 2 degree quadrangle was assembled by 6 individual detailed aeromagnetic surveys flown between 1956 and 1976 (see index map). The International Geomagnetic Reference Field had been subtracted from the data prior to assembly. An arbitrary common datum was selected and the surveys were recontoured at the joins. The 100 gamma contour was selected because it shows the magnetic contrast to best advantage. To complement the magnetic data a gravity survey was conducted by the U.S. Geological Survey and this data is available in a companion map (Wilson and Daniels, in press). Each of these maps has been interpreted in relation to the other and to the geologic map prepared as part of the same program (Goldsmith and others, 1978). It should be noted that the geophysics has had a measurable influence on some of the geologic mapping.

North Carolina, South Carolina↗
USGS1983

Hydrogeologic data from parts of the Denver basin, Colorado

This report presents hydrogeologic data collected and compiled during 1956-81 as part of a comprehensive hydrogeologic data collected and compiled during 1956-81 as part of a comprehensive hdryogeologic investigation of the Denver basin, Colorado, by the U.S. Geological Survey in cooperation with the Colorado Department of Natural Resources, Division of Water Resources, Office of the State Engineer. The data, in tabular and graphic form, consist of records for 870 wells which include water-level data for 158 wells and water-quality analyses for 561 wells; geophysical logs from three wells which include resistivity, self potential, and natural gamma logs; and gain-and-loss data of streamflow measured at 54 sites.

Colorado↗
USGS2024

Nutrient chemistry in the Elizabeth Lake subwatershed—Effects of onsite wastewater treatment systems on groundwater and lake water quality, Los Angeles County, California

Nutrient (nitrogen [N] and phosphorus [P] chemistry) downgradient from onsite wastewater treatment system (OWTS) was evaluated with a groundwater study in the area surrounding Elizabeth Lake, the largest of three sag lakes within the Santa Clara River watershed of Los Angeles County, California. Elizabeth Lake is listed on the “303 (d) Impaired Waters List” for excess nutrients and is downgradient from more than 600 OWTS. The primary objective of this study was to develop a conceptual hydrogeological model to determine if discharge from OWTS is transported into shallow groundwater within the Elizabeth Lake subwatershed and contributes nutrients to Elizabeth Lake in excess of the total maximum daily load limit. An analysis of historical data and data collected for this study provided estimates of aquifer properties, such as hydraulic gradients and other parameters necessary to estimate boundary conditions. Electrical resistivity tomography (ERT) surveys were done to determine the best monitoring well locations and to estimate depth to groundwater. During 4 separate sampling events, 11 wells, 2 imported water tanks, 1 spring (sampled on March 17, 2019), and Elizabeth Lake were sampled, which occurred during February–September 2020. ERT transects and borehole geophysical measurements indicated that there were low to high resistivity materials in the subsurface and potential perched fresh water. Most of the aquifer material was characterized as sandy silt, occasionally with mixed clays and medium gravels, and was estimated to have a hydraulic conductivity from 3.28x10 −3 to 16.4 feet per day, a porosity from 0.34 to 0.42, and a hydraulic gradient from 0.01 to 0.03. Although bedrock was not obvious in ERT transects, all well depths were terminated at depths of an impassible confining layer observed to be a highly consolidated blue-gray clay. Depths to granitic bedrock, based on road outcrops and lithologic driller logs, varied throughout the study area. Depth to the bedrock was estimated to be shallow on the north side of Elizabeth Lake at approximately 30 feet below land surface (ft bls). Depth to bedrock is at 50 ft bls toward the east of the Elizabeth Lake subwatershed, which is at topographic ground surface to the north and south of the residential development. Groundwater levels ranged from approximately 0 to 12 ft bls during this study. Historical water levels ranged from 8 to 16 ft bls in the lower elevation of the study area and increased to depths of as much as 80 ft bls at higher elevations on the north and south boundaries of the Elizabeth Lake subwatershed. Water-quality samples were analyzed for major ions, nutrients, dissolved organic carbon, stable isotopes, and age-dating tracers. A principal component analysis was completed to determine organic matter sources. The proportion of recharge from imported waters, used for domestic consumption, was calculated using stable water isotopes, deuterium (δD) and oxygen (δ 18 O). Recharge from imported waters accounted for approximately 15–71 percent of the total recharge to groundwater within the study area. Total nitrogen concentrations ranged from 0.17 to 30.9 milligrams per liter (mg/L) as N, and phosphorus, measured in the soluble form as orthophosphate, ranged from 0.03 to 0.35 mg/L as P. Nitrate concentrations in groundwater samples ranged from less than the detection limit (0.01 mg/L as N) to approximately 24 mg/L as N. Nitrate was not detected in 3 of the 12 sites sampled during the study (2 wells and Elizabeth Lake). Dissolved organic carbon concentrations ranged from 0.4 to 27 mg/L in groundwater and from 9.9 to 100 mg/L in Elizabeth Lake. Ammonium and orthophosphate concentrations generally were low in groundwater. However, elevated concentrations of ammonium in Elizabeth Lake were assumed to be due to avian waste products or biological nitrogen fixation. Groundwater ages were mostly modern (recharged since 1952), with a median recharge temperature of 13 degrees Celsius. Redox conditions in groundwater indicated the likely occurrence of nitrate attenuation by denitrification downgradient from the wells to the south of Elizabeth Lake before groundwater discharges to the lake. Undetectable nitrate in Elizabeth Lake at the time of sampling was likely due to algal uptake. Most wells contained stable isotopes of nitrogen and oxygen in nitrate (δ 15 N-NO 3 and δ 18 O-NO 3 ) molecules with values consistent with denitrification. However, one monitoring well on the north of Elizabeth Lake (ELLA-8) had no evidence of denitrification, based on elevated concentrations of nitrate and a sufficient amount of dissolved oxygen such that the water was oxic and not favorable for the denitrification reaction. Consequently, this nitrate could be delivered to Elizabeth Lake through groundwater discharge if nitrate is not removed from the system by denitrifying bacteria downgradient from the well before the groundwater discharges into Elizabeth Lake. The principal component analysis demonstrated that dissolved organic matter optical properties track different sources of dissolved organic matter from decayed plants, animals, and animal-derived wastes. Two wells contained strong indicators of OWTS water presence, although geochemical evidence indicated other wells may also be affected by OWTS discharge.

California↗
USGS2008

Levee evaluation using MASW: Preliminary findings from the Citrus Lakefront Levee, New Orleans, Louisiana

The utility of the multi‐channel analysis of surface waves (MASW) seismic method for non‐invasive assessment of earthen levees was evaluated for a section of the Citrus Lakefront Levee, New Orleans, Louisiana. This test was conducted after the New Orleans' area levee system had been stressed by Hurricane Katrina in 2005. The MASW data were acquired in a seismically noisy, urban environment using an accelerated weight‐drop seismic source and a towed seismic land streamer. Much of the seismic data were contaminated with higher‐order mode guided‐waves, requiring application of muting filtering techniques to improve interpretability of the dispersion curves. Comparison of shear‐wave velocity sections with boring logs suggests the existence of four distinct horizontal layers within and beneath the levee: (1) the levee core, (2) the levee basal layer of fat clay, (3) a sublevel layer of silty sand, and (4) underlying Pleistocene deposits of sandy lean clay. Along the surveyed section of levee, lateral variations in shear‐wave velocity are interpreted as changes in material rigidity, suggestive of construction or geologic heterogeneity, or possibly, that dynamic processes (such as differential settlement) are affecting discrete levee areas. The results of this study suggest that the MASW method is a geophysical tool with significant potential for non‐invasive characterization of vertical and horizontal variations in levee material shear strength. Additional work, however, is needed to fully understand and address the complex seismic wave propagation in levee structures.

Louisiana↗
USGS1999

Management of groundwater supply and water quality in the Los Angeles Basin, California

Water use and water needs in the coastal Los Angeles Basin in California have been very closely tied to the development of the region during the last 150 years. The first water wells were drilled in the mid-1800s. Currently about 40% of the water supply (9.4 m3 s-1) in the region is provided by groundwater. Other sources of water supply include reclaimed water and surface water imported from Owens Valley, the Colorado River, and northern California. Increasing groundwater use in the basin led to over-abstraction and seawater instrusion. Because of this, an important component of water management in the area has been the artificial recharge of local, imported, and reclaimed water which is spread in ponds and injected in wells to recharge the aquifer system and control seawater intrusion. The US Geological Survey (USGS) is working co-operatively with the Water Replenishment District of Southern California to evaluate the hydraulic and water-quality effects of these recharge operations and to assess the potential impacts of alternative water-management strategies, including changes in pumping and increases in the use of reclaimed water. As part of this work, the USGS has developed a geographic information system (GIS), collected water-quality and geohydrological data from new and existing wells, and developed a multi-aquifer regional groundwater flow model. Chemical and isotopic data were used to identify the age and source of recharge to groundwater throughout the study area. This information is key to understanding the fate of artificially recharged water and helps define the three-dimensional groundwater flow system. The geohydrological data, especially the geophysical and geological data collected from 11 newly installed multi-completion monitoring wells, were used to redefine the regional hydrostratigraphy. The groundwater flow model is being used to enhance the understanding of the geohydrological system and to quantitatively evaluate new water-management strategies.As part of the work aimed at evaluating the hydraulic and water-quality effects of recharge operations and to assess the potential impacts of alternative water-management strategies, the US Geological Survey (USGS), has developed a geographic information system (GIS), collected water-quality and geohydrological data from new and existing wells, and developed a multi-aquifer regional groundwater flow model. At present, the developed model is being used to enhance the understanding of the geohydrological system and to quantitatively evaluate new water-management strategies.

Conference Paper↗
USGS1985

Geologic characteristics of sediment- and volcanic-hosted disseminated gold deposits - Search for an occurrence model

The current expansion of resource information, particularly on "disseminated" gold, and the improved technologies now available for resource investigations should place us in an enhanced position for developing a better predictive methodology for meeting one of the important responsibilities of the U.S. Geological Survey-to examine and assess the mineral resources of the geologic terranes composing the public (and privately owned) lands of the United States. The first step is systematic organization of these data. Geologic-occurrence models are an effective systematic method by which to organize large amounts of resource information into a logical sequence facilitating its use more effectively in meeting several industry and Survey objectives, which include the exploration for resources and the assessment of resource potential for land-use decisions. Such models also provide a scientific basis for metallogenesis research, which considers the observable features or attributes of ore occurrence and their "fit" into the Earth's resource puzzle. The use of models in making resource assessments/appraisals was addressed by Shawe (1981), who reported the results of a workshop on methods for resource appraisal of Wilderness and Conterminous United States Mineral Appraisal Program (CUSMAP; 1:250,000-scale quadrangles) areas. The Survey's main objective in the 1982 workshop was to evaluate the status of knowledge about disseminated or very fine grained gold deposits and, if possible, to develop an occurrence model(s). This report on the workshop proceedings has three main objectives: (1) Education through the publication of a summary review and presentation of new thinking and observations about the scientific bases for those geologic processes and environments that foster disseminated gold-ore formation; (2) systematic organization of available geologic, geochemical, and geophysical information for a range of typical disseminated gold deposits (including recognition of gaps in those data); and (3) assessment of current understanding (as presented in objective 2) toward formulating an empirical ore-occurrence model for this type of deposit. As such, this volume represents a preliminary first step at classification and provides a source of pertinent background information. Readers of this volume will soon discover, however, that full agreement has not yet been achieved in the interpretation of some of the geologic evidence. The resulting variations in tentative occurrence models for these controversial deposits ultimately will be resolved by filling the gaps in information that have already been identified. Thus, this volume does not report a U.S. Geological Survey consensus; the conclusions expressed in each chapter represent the particular interpretations of the various workshop participants.

Arizona, California, Idaho, Nevada, Utah↗
USGS2017

Geophysical characterization of seismic station sites in the United States – The importance of a flexible, multi-method approach

Noninvasive geophysical site characterization methods were used in two recent projects to obtain shear-wave velocity (VS) profiles to a minimum depth of 30 m and the time-averaged VS of the upper 30 meters (VS30) at seismic station sites. These projects include the 2009 American Recovery and Reinvestment Act (ARRA) funded U.S. Geological Survey site characterization project for 191 sites in California and the Central-eastern United States (CEUS), and the 2012 Electric Power Research Institute (EPRI) funded project for 33 additional CEUS sites. These sites are located in rural to urban settings with topographic conditions ranging from relatively flat sedimentary basins to mountaintop ridges. About 60 percent of the ARRA sites and 80 percent of the EPRI sites are located on rock or have thin sediment cover over rock, including Quaternary volcanic rock, Tertiary sediments and sedimentary rock, and Mesozoic (or older) crystalline or sedimentary rock. The remaining sites consist of thick sequences of Quaternary sediments overlying older sediments and rock. ARRA sites were characterized using non-invasive active and passive surface-wave methods, including the horizontal-tovertical spectral ratio (HVSR) method and one or more of the following: spectral analysis of surface waves (SASW), multichannel analysis of surface waves (MASW; Rayleigh and Love waves) and, occasionally, array microtremor (linear and 2-D arrays) methods. P-wave seismic refraction data were also acquired at rock and shallow-rock sites. S-wave seismic refraction and/or Love-wave MASW methods were applied at sites where characterization proved difficult with Rayleighwave methods. Based on our experience from the ARRA project, we acquired Rayleigh- and Love-wave based MASW and P- and S-wave refraction data for the EPRI project at CEUS sites. The HVSR method was found to be useful for identifying shallow-rock sites and for evaluating the relative variability of the depth-to-rock interface beneath the seismic station and the testing array(s). The fundamental mode modeling assumption was generally valid at most of these sites; nevertheless, multi-mode or effective-mode modeling routines were occasionally required, particularly in the case of shallow high-velocity layers. Deep sediment sites were characterized using active and, when appropriate, passive surface-wave based methods. Rock and shallow sediment sites were generally more challenging to characterize than deep sediment sites. About 10 percent of rock sites could not be characterized using surface wave methods, thus these sites were characterized using body-wave refraction methods. Love wave methods were found to be more effective than Rayleigh wave methods at some rock and shallow-rock sites (e.g., sites with shallow rock and sites with a thin low-velocity, highly attenuating surface layer). Lateral velocity variability was found to be very common at rock and shallow-rock sites, often causing significant scatter in the surface-wave dispersion data. Seismic refraction models have demonstrated that it may not be unusual for VS30 to vary by 20 percent, or more, over small distances (several tens of meters) at such sites. Based on these experiences, it is important to consider the application of combinations of methods when using noninvasive geophysical approaches to characterize seismic site conditions.

Conference Paper↗
USGS2007

Borehole Geophysical Logging of Water-Supply Wells in the Piedmont, Blue Ridge, and Valley and Ridge, Georgia

Crystalline and carbonate-rock aquifers in northern Georgia provide water to an ever-increasing number of private and public wells in the region. Understanding the depth and yield of water-bearing zones in such wells is crucial for the development and long-term sustainability of ground-water resources and for keeping wells in good operating condition. Portable geophysical logging units are now widely available and have greatly increased the ability of geoscientists to obtain subsurface information from water wells.

Georgia↗
USGS2015

Geohydrologic and water-quality characterization of a fractured-bedrock test hole in an area of Marcellus shale gas development, Tioga County, Pennsylvania

An integrated analysis of core, geophysical logs, gas isotopes, and specific-depth water-quality samples from the Cherry Flats test hole was used to characterize the stratigraphy, water-bearing zones, and groundwater quality at a site in southern Tioga County, Pennsylvania. The study was completed as a cooperative effort between the Pennsylvania Department of Natural Resources, Bureau of Topographic and Geologic Survey (BTGS) and the U.S. Geological Survey (USGS). The multi-disciplinary characterization of the test hole provided information to aid the bedrock mapping of the Cherry Flats 7.5-minute quadrangle by BTGS, and to help quantify the depth and character of fresh and saline groundwater in an area of shale-gas exploration. The Cherry Flats test hole was cored to a depth of 1,513 feet (ft) below land surface (bls) and cased to 189 ft through the collapsed mine workings of the former Arnot No. 2 underground coal mine. The test hole penetrated 128.0 ft of Allegheny Formation and 154.1 ft of Pottsville Formation of Pennsylvanian age, 564.8 ft of Huntley Mountain Formation of Mississippian and Devonian age, and 666.3 ft of Catskill Formation of Devonian age. Core recovery was nearly 100 percent, except where complete core loss occurred from a depth of 1,231.1 to 1,240.8 ft. Several coal beds and mined-out coal horizons were penetrated in the Allegheny and Pottsville Formations. The test hole penetrated the entire thickness of the Huntley Mountain Formation and was completed in the middle part of the Catskill Formation. Bedding features penetrated by the test hole were estimated to have a strike of 021 degrees and dip about 1.7 degrees to the southeast, consistent with the test-hole location on the north limb of the Blossburg syncline. Most fractures penetrated by the test hole were parallel to bedding, with steeply dipping fractures present but much less common. Fracture density, determined from optical televiewer, acoustic televiewer, and video logs, generally increased with depth from the base of casing to about 400 ft bls, then decreased with depth to the bottom of the hole except for an increase from 506 to 568 ft bls. Very few fractures were penetrated from 600 to 850 ft. The depths of fresh and saline water-bearing zones were identified in the test hole by geophysical-log analysis and, for inflow zones, verified by specific-depth groundwater sampling by the use of a wire-line point sampler. Under ambient conditions and during pumping of the test hole, fresh water entered the hole from fractures at 567 and 580.5 ft bls, within grayish-red siltstone and greenish-gray sandstone, respectively, and flowed upward and exited at fractures from 303 to 319.5 ft; a very minor amount exited into fractures within coal beds at 240.4 and 252 ft bls. Transmissivity, estimated from analysis of the specific-capacity data and flowmeter logs, was about 18 ft2/d for the fracture zones from 567 to 580.5 ft and 6.7 ft2/d for fracture zones from 240.4 to 252 ft bls. The analysis estimated the hydraulic head of the lower zone and that of the upper flow zone was 8 ft higher and 37 ft lower than the composite water level in the test hole, respectively. Water samples of the freshwater inflow from zones at 567 to 580.5 ft bls had a total dissolved solids concentration of 577 mg/L indicating that these zone are in the lower part of the active groundwater flow system. Below the freshwater-bearing zone at 580.5 ft, the flowmeter did not detect any vertical flow in the test hole, and the gradient of the temperature log approached the geothermal gradient, indicating little ambient fluid flow and minimal fracture transmissivity below this depth. However, small seeps of saline water having total dissolved solids concentrations of greater than about 6,200 mg/L at 945 and 946 ft bls, from dark-greenish-gray to greenish-gray silty beds, were delineated by a time series of specific conductancelogs and observed on the video log. A wat

Pennsylvania↗
USGS2026

Deep groundwater total dissolved solids mapping in the Dakota Group, Williston Basin, USA

Growing concern about the quantity of available freshwater around the world has led to interest in surveying groundwater total dissolved solids (TDS) below water well depths. Deep TDS has not been systematically mapped, and there is much to learn about the distribution and controls on deeper groundwater. In sedimentary basins across the United States, groundwater resources often overlie hydrocarbon resources, providing an opportunity to use borehole geophysical data collected for hydrocarbons to characterize groundwater and pore space resources. This study adapts a recently developed subsurface geostatistical and geophysical modeling approach to continuously map groundwater TDS, porosity, and temperature in the Dakota Group of the Williston Basin—an undercharacterized regional aquifer system overlying deeper hydrocarbon reservoirs. Groundwater TDS in the Dakota Group ranges from approximately 4800 to 26,900 mg/L. TDS patterns are stratified with higher TDS in the lower and upper Dakota Group, and relatively lower TDS in the middle Dakota Group. The lower TDS in the middle zone may represent a preferential regional flow path for lower-TDS meteoric recharge from the west. The alternating pattern of TDS may also be evidence of higher-TDS inflows into the Dakota Group from underlying and potentially from overlying aquifers. Porosity is lower near the center of the Williston Basin and tends to be higher to the east, which may be related to grain size distributions. The new regional TDS and porosity modeling serves as a quantitative reference for water users and provides supporting evidence for hypotheses on Dakota Group recharge.

Montana, North Dakota, South Dakota↗
USGS1947

Preliminary report on the stratigraphy and structure of the Titaluk and upper Ikpikpuk Rivers, Alaska

Geological Survey Party No. 4 was assigned an investigation of the Ikpikpuk and Titaluk Rivers and East Fork of the Ikpikpuk River mainly for the purpose of obtaining stratigraphic information which would be of use in determining the parts of the Upper Cretaceous sequence that underlie the areas investigated by United Geophysical Company parties 43 and 46. A total of five days were spent in geological investigations of the Titaluk River with a Cub plane equipped with pontoons. The party was composed of the geologist and Don Hulshizer, pilot of Wien Alaska Airlines. The geologist and Ronald K. Sorem, field assistant, traversed the Ikpikpuk River by boat from the junction of Maybe Creek and the Kigalik River to near the junction of the East Fork. From the northernmost point reached by boat traverse, the river was examined by plane to north of latitude 70° N., but no outcrops or rubble indicating bedrock were seen. The East Fork was also examined from the air but no outcrops or rubble were observed.

Alaska↗
USGS1982

A plan for hydrologic investigations of in situ, oil-shale retorting near Rock Springs, Wyoming

The recovery of shale oil by the in-situ retort process may cause hydrologic impacts, the most significant being ground-water contamination and possible transport of contaminants into surrounding areas. Although these impacts are site-specific, many of the techniques used to investigate each retort operation commonly will be the same. The U.S. Geological Survey has begun a study of hydrologic impacts in the area of an in-situ retort near Rock Springs, Wyoming, as a means of refining and demonstrating these techniques. Geological investigations include determining the areal extent and thickness of aquifers. Emphasis will be placed on determining lithologic variations from geophysical logging. Hydrologic investigations include mapping of potentiometric surfaces, determining rates of ground-water discharge, and estimating aquifer properties by analytical techniques. Water-quality investigations include monitoring solute migration from the retort site and evaluating sampling techniques by standard statistical procedures. A ground-water-flow and solute-transport model will be developed to predict future movement of the water plume away from the retort. (USGS)

Open-File Report↗