Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “SOIL”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91Linked to original sources
USGS1972

Silicate melt inclusions and glasses in lunar soil fragments from the Luna 16 core sample

More than 2000 fragments were studied microscopically, and electron microprobe analyses were made of 39 selected areas, from a few square mm of polished surface, through 75- to 425-μm fragments of lunar soil from two samples of the Luna 16 core. The silicate melt inclusions and glasses differ in important details from those observed earlier in the Apollo samples. Melt inclusions in olivine contain epitaxially oriented daughter crystals, but also show a similar epitaxy around the outside of the crystals not observed in previous lunar samples. Melt inclusions in ilmenite suggest trapping at successive stages in a differentiation sequence. There is abundant evidence for late-stage silicate liquid immiscibility, with melt compositions similar but not identical to those from Apollo 11 and 12. A comparison of the alkali ratio of any given bulk rock analysis with that of its late-stage, high-silica melt shows gross differences for different rocks. This is pertinent to understanding late-stage differentiation processes. Glass fragments and spherules exhibit a wide range of crystallization textures, reflecting their wide range of compositions and cooling histories. No significant differences were found between the two portions of core examined (Zones A and D).

Earth and Planetary Science Letters↗
USGS1986

Detection of erosion events using 10Be profiles: example of the impact of agriculture on soil erosion in the Chesapeake Bay area (U.S.A.)

10 Be concentration, total carbon and grain-size were measured in cores collected in undisturbed estuarine sediments of three tributaries of the Chesapeake Bay. These cores were previously studied by Davis [1] and Brush [2,3] for pollen content, age and sedimentation rate. In this work, we compare the results obtained for these various analyses. In the cores, we observed two increases in 10 Be concentration concomitant with two major changes in the pollen composition of the sediments. These two pollen changes each correspond to well-dated agricultural horizons reflecting different stages in the introduction of European farming techniques [2]. In the Chesapeake Bay area, the agricultural development, associated with forest clearing, appears to have triggered the erosion, transport, and sedimentation into the river mouths of large quantities of 10 Be-rich soils. This phenomenon explains the observed rise in the sedimentation rate associated with increases in agricultural land-use.

Chesapeake Bay area↗
USGS1989

The chemical structure of highly aromatic humic acids in three volcanic ash soils as determined by dipolar dephasing NMR studies

Dipolar dephasing 13 C NMR studies of three highly aromatic humic acids, one from a modern soil and two from paleosols, have permitted the determination of the degree of aromatic substitution. From these data and the normal solid-state 13 C NMR data we have been able to develop a model for the average chemical structure of these humic acids that generally correlates well with permanganate oxidation data. The models depict these humic acids as benzene di- and tricarboxylic acids interconnected by biphenyl linkages. An increasing degree of substitution is observed with increasing geologic age. These structures may be characteristic of the resistant aromatic part of the “core” of humic substances that survives degradation.

Geochimica et Cosmochimica Acta↗
USGS1971

A general evaluation of the frequency distribution of clay and associated minerals in the alluvial soils of Ceylon

Clay mineral analyses were made of several alluvial clay materials from Ceylon. These studies show that the soil materials can be divided into 3 clay mineral provinces on the basis of the frequency distribution of clay and associated minerals. The provinces closely follow the climatic divisions. The characteristic feature of this classification is the progressive development of gibbsite from Dry to Wet Zone areas. Gibbsite has been used as a reliable indicator mineral.

Geoderma↗
USGS1991

Soil chronosequence studies in temperate to subtropical, low-latitude, low-relief terrain with data from the eastern United States

The Coastal Plain of the eastern United States is a low-latitude, low-altitude, low-relief terrain composed primarily of gently dipping marine and marginal-marine sediments that range in age from Cretaceous to Quaternary. Population density of the area is moderate, and most of the population is concentrated along the coast. Inland of the coast, agriculture, including growing trees for pulp, is the dominant economy. In this region, soils have developed along two different pathways. One pathway is dominated by the dissolution and movement of oxyhydroxides and the accumulation of organic matter; the other by the accumulation of clays and oxyhydroxyides and the adsorption or oxidation of organic matter. The first pathway has resulted in the formation of Spodosols; the second, in the development of Ultisols. No clearly distinguishable age trends have been identified in the Spodosols, but the properties of Ultisols can be measured to quantify surface material alteration through time. Ultisols are, therefore, suited to order-of-magnitude chronostratigraphic interpretations. Potentially, data derived through the study of Ultisols can be used to develop models that predict how surface processes will change due to continued weathering and pedogenesis or as the result of climate change.

Alabama, Delaware, Florida, Georgia, Maryland, New↗
USGS1990

Spectral estimates of net radiation and soil heat flux

Conventional methods of measuring surface energy balance are point measurements and represent only a small area. Remote sensing offers a potential means of measuring outgoing fluxes over large areas at the spatial resolution of the sensor. The objective of this study was to estimate net radiation (R n ) and soil heat flux (G) using remotely sensed multispectral data acquired from an aircraft over large agricultural fields. Ground-based instruments measured R n and G at nine locations along the flight lines. Incoming fluxes were also measured by ground-based instruments. Outgoing fluxes were estimated using remotely sensed data. Remote R n , estimated as the algebraic sum of incoming and outgoing fluxes, slightly underestimated R n measured by the ground-based net radiometers. The mean absolute errors for remote R n minus measured R n were less than 7%. Remote G, estimated as a function of a spectral vegetation index and remote R n , slightly overestimated measured G; however, the mean absolute error for remote G was 13%. Some of the differences between measured and remote values of R n and G are associated with differences in instrument designs and measurement techniques. The root mean square error for available energy (R n - G) was 12%. Thus, methods using both ground-based and remotely sensed data can provide reliable estimates of the available energy which can be partitioned into sensible and latent heat under nonadvective conditions.

Remote Sensing of Environment↗
USGS1988

Infiltration through layered-soil trench covers: Response to an extended period of rainfall

Four experimental waste disposal trench covers were constructed to test the effectiveness of layered-soil cover designs in reducing infiltration. Three covers each consisted of a layer of gravel between an overlying wick layer of compacted fine-grained material (either silt or loam) and a compacted loam base; the fourth consisted of compactd silt over a loam base. Capillary pressures were monitored at various depths within each cover during October through December, 1985, a period of high rainfall following a dry summer. Moisture movement in response to the rainfall was rapid within the upper layers of all four test covers, but was retained within the upper layers of the three wick-system trenches, despite variations in the design thickness and composition of the wick layers. In the wick systems, moisture did not enter the gravel until a threshold level of pressure approaching saturation was established in the wick layer. Once this level was reached, moisture moved into and through the gravel. This experiment demonstrates the functionality of field-scale wick systems.

Journal of Contaminant Hydrology↗
USGS2003

The medical geochemistry of dusts, soils, and other Earth materials: Chapter 7

A quick scan of newspapers, television, science magazines, or the internet on any given day has a fairly high likelihood of encountering stories (accompanied by headlines such as those above) regarding human health concerns linked to dusts, soils, or other Earth materials. Many such concerns have been recognized and studied for decades, but new concerns arise regularly.

Book chapter↗
USGS2012

Distribution of Cu, Co, As, and Fe in mine waste, sediment, soil, and water in and around mineral deposits and mines of the Idaho Cobalt Belt, USA

The distribution of Cu, Co, As and Fe was studied downstream from mines and deposits in the Idaho Cobalt Belt (ICB), the largest Co resource in the USA. To evaluate potential contamination in ecosystems in the ICB, mine waste, stream sediment, soil, and water were collected and analyzed for Cu, Co, As and Fe in this area. Concentrations of Cu in mine waste and stream sediment collected proximal to mines in the ICB ranged from 390 to 19,000 μg/g, exceeding the USEPA target clean-up level and the probable effect concentration (PEC) for Cu of 149 μg/g in sediment; PEC is the concentration above which harmful effects are likely in sediment dwelling organisms. In addition concentrations of Cu in mine runoff and stream water collected proximal to mines were highly elevated in the ICB and exceeded the USEPA chronic criterion for aquatic organisms of 6.3 μg/L (at a water hardness of 50 mg/L) and an LC50 concentration for rainbow trout of 14 μg/L for Cu in water. Concentrations of Co in mine waste and stream sediment collected proximal to mines varied from 14 to 7400 μg/g and were highly elevated above regional background concentrations, and generally exceeded the USEPA target clean-up level of 80 μg/g for Co in sediment. Concentrations of Co in water were as high as in 75,000 μg/L in the ICB, exceeding an LC50 of 346 μg/L for rainbow trout for Co in water by as much as two orders of magnitude, likely indicating an adverse effect on trout. Mine waste and stream sediment collected in the ICB also contained highly elevated As concentrations that varied from 26 to 17,000 μg/g, most of which exceeded the PEC of 33 μg/g and the USEPA target clean-up level of 35 μg/g for As in sediment. Conversely, most water samples had As concentrations that were below the 150 μg/L chronic criterion for protection of aquatic organisms and the USEPA target clean-up level of 14 μg/L. There is abundant Fe oxide in streams in the ICB and several samples of mine runoff and stream water exceeded the chronic criterion for protection of aquatic organisms of 1000 μg/L for Fe. There has been extensive remediation of mined areas in the ICB, but because some mine waste remaining in the area contains highly elevated Cu, Co, As and Fe, inhalation or ingestion of mine waste particulates may lead to human exposure to these elements.

Idaho↗
USGS2025

The impact of burial diagenesis on soil-formed minerals in paleosols using stable isotopes of phyllosilicates and carbonate clumped isotopes

To understand the effects of burial diagenesis on the stable isotope geochemistry of soil-formed clay and carbonate minerals in paleosols, samples were collected from seven cores, spanning middle- to upper-Pennsylvanian strata of the Illinois Basin, with varied maximum burial depths of 1–3 km. Mixed-layer illite-smectite and kaolinite mixtures give δ 2 H and δ 18 O values of −83 ‰ to −36 ‰ and 11.9 ‰ to 21.1 ‰ (VSMOW), respectively. After carbonates were screened petrographically for diagenetic textures using transmitted light and cathodoluminescence, measured clumped isotope Δ 47 values range from 0.504 to 0.563 ‰ (I-CDES). Resulting mineral formation temperatures for phyllosilicate mineral mixtures are 28 to 66 °C (mean = 47 °C), whereas T(Δ 47 ) estimates for calcites are 36 to 61 °C (mean = 45 °C). Calculated δ 18 O water values from which phyllosilicate minerals and calcites precipitated under isotopic equilibrium ranges from −7.1 to −1.2 ‰ and − 1.4 to +4.9 ‰, respectively. Closed and open-system phyllosilicate-fluid exchange modeling indicates that phyllosilicate alteration occurred in the presence of a low temperature brine or meteoric water and is interpreted to occur in a layer-by-layer illitization transformation. Due to the lack of diagenetic textures and positively correlated T(Δ 47 ) and δ 18 O water , calcites are interpreted to have undergone solid-state bond reordering. Despite low to moderate temperatures (<125 °C) and varying depths of shallow burial (1–3 km), solid-state transformation of phyllosilicates and calcites indicates paleosols had prolonged exposure to burial conditions which has implications for the use of paleosol minerals for paleoenvironmental reconstructions.

Illinois, Indiana, Kentucky↗
USGS2017

Simulating the effects of management practices on cropland soil organic carbon changes in the Temperate Prairies Ecoregion of the United States from 1980 to 2012

Understanding the effects of management practices on soil organic carbon (SOC) is important for designing effective policies to mitigate greenhouse gas emissions in agriculture. In the Midwest United States, management practices in the croplands have been improved to increase crop production and reduce SOC loss since the 1980s. Many studies of SOC dynamics in croplands have been performed to understand the effects of management, but the results are still not conclusive. This study quantified SOC dynamics in the Midwest croplands from 1980 to 2012 with the General Ensemble Biogeochemical Modelling System (GEMS) and available management data. Our results showed that the total SOC in the croplands decreased from 1190 Tg C in 1980 to 1107 TgC in 1995, and then increased to 1176 TgC in 2012. Continuous cropping and intensive tillage may have driven SOC loss in the early period. The increase of crop production and adoption of conservation tillage increased the total SOC so that the decrease in the total SOC stock after 32 years was only 1%. The small change in average SOC did not reflect the large spatial variations of SOC change in the region. Major SOC losses occurred in the north and south of the region, where SOC baseline values were high and cropland production was low. The SOC gains took place in the central part of the region where SOC baseline values were moderate and cropland production was higher than the other areas. We simulated multiple land-use land-cover (LULC) change scenarios and analyzed the results. The analysis showed that among all the LULC changes, agricultural technology that increased cropland production had the greatest impact on SOC changes, followed by the tillage practices, changes in crop species, and the conversions of cropland to other land use. Information on management practice induced spatial variation in SOC can be useful for policy makers and farm managers to develop long-term management strategies for increasing SOC sequestration in different areas.

Ecological Modelling↗
USGS2011

Elevation trends and shrink-swell response of wetland soils to flooding and drying

Given the potential for a projected acceleration in sea-level rise to impact wetland sustainability over the next century, a better understanding is needed of climate-related drivers that influence the processes controlling wetland elevation. Changes in local hydrology and groundwater conditions can cause short-term perturbations to marsh elevation trends through shrink–swell of marsh soils. To better understand the magnitude of these perturbations and their impacts on marsh elevation trends, we measured vertical accretion and elevation dynamics in microtidal marshes in Texas and Louisiana during and after the extreme drought conditions that existed there from 1998 to 2000. In a Louisiana marsh, elevation was controlled by subsurface hydrologic fluxes occurring below the root zone but above the 4 m depth (i.e., the base of the surface elevation table benchmark) that were related to regional drought and local meteorological conditions, with marsh elevation tracking water level variations closely. In Texas, a rapid decline in marsh elevation was related to severe drought conditions, which lowered local groundwater levels. Unfragmented marshes experienced smaller water level drawdowns and more rapid marsh elevation recovery than fragmented marshes. It appears that extended drawdowns lead to increased substrate consolidation making it less resilient to respond to future favorable conditions. Overall, changes in water storage lead to rapid and large short-term impacts on marsh elevation that are as much as five times greater than the long-term elevation trend, indicating the importance of long-term, high-resolution elevation data sets to understand the prolonged effects of water deficits on marsh elevation change.

Louisiana, Texas↗
USGS2009

The role of reaction affinity and secondary minerals in regulating chemical weathering rates at the Santa Cruz Soil Chronosequence, California

In order to explore the reasons for the apparent discrepancy between laboratory and field weathering rates and to determine the extent to which weathering rates are controlled by the approach to thermodynamic equilibrium, secondary mineral precipitation, and flow rates, a multicomponent reactive transport model (CrunchFlow) was used to interpret soil profile development and mineral precipitation and dissolution rates at the 226 ka Marine Terrace Chronosequence near Santa Cruz, CA. Aqueous compositions, fluid chemistry, transport, and mineral abundances are well characterized [White A. F., Schulz M. S., Vivit D. V., Blum A., Stonestrom D. A. and Anderson S. P. (2008) Chemical weathering of a Marine Terrace Chronosequence, Santa Cruz, California. I: interpreting the long-term controls on chemical weathering based on spatial and temporal element and mineral distributions. Geochim. Cosmochim. Acta 72 (1), 36-68] and were used to constrain the reaction rates for the weathering and precipitating minerals in the reactive transport modeling. When primary mineral weathering rates are calculated with either of two experimentally determined rate constants, the nonlinear, parallel rate law formulation of Hellmann and Tisserand [Hellmann R. and Tisserand D. (2006) Dissolution kinetics as a function of the Gibbs free energy of reaction: An experimental study based on albite feldspar. Geochim. Cosmochim. Acta 70 (2), 364-383] or the aluminum inhibition model proposed by Oelkers et al. [Oelkers E. H., Schott J. and Devidal J. L. (1994) The effect of aluminum, pH, and chemical affinity on the rates of aluminosilicate dissolution reactions. Geochim. Cosmochim. Acta 58 (9), 2011-2024], modeling results are consistent with field-scale observations when independently constrained clay precipitation rates are accounted for. Experimental and field rates, therefore, can be reconciled at the Santa Cruz site. Additionally, observed maximum clay abundances in the argillic horizons occur at the depth and time where the reaction fronts of the primary minerals overlap. The modeling indicates that the argillic horizon at Santa Cruz can be explained almost entirely by weathering of primary minerals and in situ clay precipitation accompanied by undersaturation of kaolinite at the top of the profile. The rate constant for kaolinite precipitation was also determined based on model simulations of mineral abundances and dissolved Al, SiO 2 (aq) and pH in pore waters. Changes in the rate of kaolinite precipitation or the flow rate do not affect the gradient of the primary mineral weathering profiles, but instead control the rate of propagation of the primary mineral weathering fronts and thus total mass removed from the weathering profile. Our analysis suggests that secondary clay precipitation is as important as aqueous transport in governing the amount of dissolution that occurs within a profile because clay minerals exert a strong control over the reaction affinity of the dissolving primary minerals. The modeling also indicates that the weathering advance rate and the total mass of mineral dissolved is controlled by the thermodynamic saturation of the primary dissolving phases plagioclase and K-feldspar, as is evident from the difference in propagation rates of the reaction fronts for the two minerals despite their very similar kinetic rate laws. ?? 2009 Elsevier Ltd.

Geochimica et Cosmochimica Acta↗
USGS2008

Evidence for an eolian origin for the silt-enriched soil mantles on the glaciated uplands of eastern Upper Michigan, USA

We provide textural, geochemical, and mineralogical data on a thin, silty deposit that unconformably mantles glaciated uplands in the eastern Upper Peninsula of Michigan. Previous research on this deposit, which we hypothesize to be loess, is nonexistent. The uplands were islands or narrow peninsulas within one or more glacial lakes. We compare the distribution, likely source and nature of the 20-60??cm thick silty mantle by using the loess formation model of Mason et al. [Mason, J.A., Nater, E.A., Zanner, C.W., Bell, J.C., 1999. A new model of topographic effects on the distribution of loess. Geomorphology 28, 223-236], which focuses on the generation of eolian silt by saltating sand across upwind, barren surfaces. Parabolic dunes, with arms open to the NW, are common on former lake floors upwind of the silt-mantled uplands, attesting to the strength and direction of paleowinds. The abrupt termination of the dunes at the footslopes of the uplands, associated with silt deposition on upland soil surfaces in downwind locations, are both consistent with the model of Mason et al. [Mason, J.A., Nater, E.A., Zanner, C.W., Bell, J.C., 1999. A new model of topographic effects on the distribution of loess. Geomorphology 28, 223-236]. Sediments on former lake floors contain abundant strata of fine/medium sand and silt, and thus are likely sources for the silt and dune sand. The cap, dune and lake sediments are similar along many different geochemical axes, whereas the substrate sediment, i.e., the drift below the cap, is unique. Cap sediments, normally containing roughly 30% silt, are enriched in quartz and depleted in Ti and Zr, relative to dune sediment. The dune sediment, a more residual eolian deposit, is enriched in Ti and Zr, relative to the cap, probably due to its greater abundance of heavy minerals. Therefore, we conclude that the silty cap is loess that was deflated from abandoned lake floors after nearby glacial lakes drained, probably contemporaneously with dune migration across the former lake floors. ?? 2008 Elsevier B.V. All rights reserved.

Geomorphology↗
USGS2009

Seed banks in a degraded desert shrubland: Influence of soil surface condition and harvester ant activity on seed abundance

We compared seed banks between two contrasting anthropogenic surface disturbances (compacted, trenched) and adjacent undisturbed controls to determine whether site condition influences viable seed densities of perennial and annual Mojave Desert species. Viable seeds of perennials were rare in undisturbed areas (3-4 seeds/m 2 ) and declined to <1 seed/m 2 within disturbed sites. Annual seed densities were an order of magnitude greater than those of perennials, were one-third the undisturbed seed densities on compacted sites, but doubled on trenched sites relative to controls. On trenched sites, greater litter cover comprising the infructescences of the dominant spring annuals, and low gravel content, enhanced seed densities of both annuals and perennials. Litter cover and surface ruggedness were the best explanations for viable perennial seed densities on compacted sites, but litter cover and the presence of a common harvester ant explained annual seed densities better than any other surface characteristics that were examined. Surface disturbances can have a varied impact on the condition of the soil surface in arid lands. Nevertheless, the consistently positive relationship between ground cover of litter and viable seed density emphasizes the importance of litter as an indicator of site degradation and recovery potential in arid lands.

Journal of Arid Environments↗
USGS2015

A comparison of estimates of basin-scale soil-moisture evapotranspiration and estimates of riparian groundwater evapotranspiration with implications for water budgets in the Verde Valley, Central Arizona, USA

Population growth in the Verde Valley in Arizona has led to efforts to better understand water availability in the watershed. Evapotranspiration (ET) is a substantial component of the water budget and a critical factor in estimating groundwater recharge in the area. In this study, four estimates of ET are compared and discussed with applications to the Verde Valley. Higher potential ET (PET) rates from the soil-water balance (SWB) recharge model resulted in an average annual ET volume about 17% greater than for ET from the basin characteristics (BCM) recharge model. Annual BCM PET volume, however, was greater by about a factor of 2 or more than SWB actual ET (AET) estimates, which are used in the SWB model to estimate groundwater recharge. ET also was estimated using a method that combines MODIS-EVI remote sensing data and geospatial information and by the MODFLOW-EVT ET package as part of a regional groundwater-flow model that includes the study area. Annual ET volumes were about same for upper-bound MODIS-EVI ET for perennial streams as for the MODFLOW ET estimates, with the small differences between the two methods having minimal impact on annual or longer groundwater budgets for the study area.

Arizona↗
USGS2019

The influence of layout on Appalachian Trail soil loss, widening, and muddiness: Implications for sustainable trail design and management

This research investigates the influence of layout and design on the severity of trail degradation. Previous trail studies have been restricted by relatively small study areas which provide a limited range of environmental conditions and therefore produce findings with limited applicability; this research improves on this limitation by analyzing a representative sample of the Appalachian Trail with significant topographical, ecological, use-related, and managerial diversity. Many trail science studies have also focused on a singular form of trail degradation, whereas this study investigates all three core types of trail impact: trail soil loss, widening and muddiness. Relational analyses with all three indicators provide a more cohesive understanding of trail impact and reveal interrelationships between trail degradation processes. ANOVA testing of the mean values for these trail impact indicators across categories of influential independent factors confirms and refines the relevance of core trail design principles, specifically the sustainability advantages of trails with low grades and side-hill alignments. Findings also reveal and clarify the importance of landform grade in determining the susceptibility of trails to degradation and the influence of routing decisions; these relationships have received relatively little attention in the literature. The results also reveal several methodological considerations for trail alignment metrics and trail impact indicators

Connecticut, Georgia, Maine, Massachusetts, Maryla↗