SEARCH · Geology Reports

Results for “The Earth Observer”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90Linked to original sources

USGS2019

Aluminum mobility in mildly acidic mine drainage: Interactions between hydrobasaluminite, silica and trace metals from the nano to the meso-scale

Aluminum precipitates control the hydrochemistry and mineralogy of a broad variety of environments on Earth (e.g., acid mine drainage, AMD, coastal wetlands, boreal and alpine streams, tropical acid sulfate soils, laterites and bauxites, …). However, the geochemical and mineralogical processes controlling Al (and other associated metals and metalloids) transport and removal in those environments are not fully understood. The geochemical system of Paradise Portal (Colorado, USA) comprises sulfate-rich mildly acidic waters, the hydrochemistry of which is directly controlled by the massive precipitation of hydrobasaluminite Al 4 (SO 4 )(OH) 10 ·12-36H 2 O. Three connected but discernible aluminum precipitation stages were identified and described: 1) nanoparticle formation and size decrease along the creek, 2) hydrobasaluminite neoformation on the riverbed, and 3) precipitate accretion and accumulation on the riverbed leading to Al and Fe banded formations. The co-occurrence of Al and Si in the system was observed, recording significant amounts of Si accompanying the three different components of the system (i.e., nanoparticles and fresh and aged Al-precipitates). Also, abrupt and minor changes in the sedimentary record were described and proposed to be the response of the system to seasonal and interannual changes in AMD chemistry. Concerning the mobility of other metals and metalloids, P, Th, V, W, Ti and B showed a tendency to be preferentially incorporated into hydrobasaluminite, while others like Be, As, Se or Ba tend to remain dissolved in the water.

Chemical Geology↗

USGS2015

Water from air: An overlooked source of moisture in arid and semiarid regions

Water drives the functioning of Earth’s arid and semiarid lands. Drylands can obtain water from sources other than precipitation, yet little is known about how non-rainfall water inputs influence dryland communities and their activity. In particular, water vapor adsorption – movement of atmospheric water vapor into soil when soil air is drier than the overlying air – likely occurs often in drylands, yet its effects on ecosystem processes are not known. By adding 18 O-enriched water vapor to the atmosphere of a closed system, we documented the conversion of water vapor to soil liquid water across a temperature range typical of arid ecosystems. This phenomenon rapidly increased soil moisture and stimulated microbial carbon (C) cycling, and the flux of water vapor to soil had a stronger impact than temperature on microbial activity. In a semiarid grassland, we also observed that non-rainfall water inputs stimulated microbial activity and C cycling. Together these data suggest that, during rain-free periods, atmospheric moisture in drylands may significantly contribute to variation in soil water content, thereby influencing ecosystem processes. The simple physical process of adsorption of water vapor to soil particles, forming liquid water, represents an overlooked but potentially important contributor to C cycling in drylands.

Scientific Reports↗

USGS2015

Direct measurement of asperity contact growth in quartz at hydrothermal conditions

Earthquake recurrence requires interseismic fault restrengthening which results from solid state deformation in room-temperature friction and indentation experiments. In contrast exhumed fault zones show solution-transport processes such as pressure solution and contact overgrowths influence fault zone properties . In the absence of fluid flow, overgrowths are driven by gradients in surface curvature where material is dissolved, diffuses, and precipitates at the contact without convergence normal to the contact. To determine the rate of overgrowth for quartz, we conducted single contact experiments in an externally heated pressure vessel. Convergence was continuously monitored using reflected-light interferometry through a long-working-distance microscope. Contact normal force was constant with an initial effective normal stress of 1.7 MPa, temperature was between 350 and 530{degree sign}C, and water pressure was constant at 150 MPa. Two control experiments were conducted: one dry at 425{degree sign}C and one bi-material (sapphire) at 425{degree sign}C and 150 MPa water pressure. No contact growth or convergence was observed in the controls. For wet single-phase contacts, growth was initially rapid and then decreased with time. No convergence was observed. Fluid inclusions indicate that the contact is not uniformly wetted. The contact is bounded by small regions of high aperture, reflecting local free-face dissolution as the source for the overgrowth. The apparent activation energy is ~125 kJ/mol. Extrapolation predicts rates of contact area increase orders of magnitude faster than in dry, room-temperature and hydrothermal friction experiments, suggesting that natural strength recovery near the base of the seismogenic zone could be dominated by contact overgrowth.

Journal of Geophysical Research B: Solid Earth↗

USGS2017

A model integrating longshore and cross-shore processes for predicting long-term shoreline response to climate change

We present a shoreline change model for coastal hazard assessment and management planning. The model, CoSMoS-COAST (Coastal One-line Assimilated Simulation Tool), is a transect-based, one-line model that predicts short-term and long-term shoreline response to climate change in the 21 st century. The proposed model represents a novel, modular synthesis of process-based models of coastline evolution due to longshore and cross-shore transport by waves and sea-level rise. Additionally, the model uses an extended Kalman filter for data assimilation of historical shoreline positions to improve estimates of model parameters and thereby improve confidence in long-term predictions. We apply CoSMoS-COAST to simulate sandy shoreline evolution along 500 km of coastline in Southern California, which hosts complex mixtures of beach settings variably backed by dunes, bluffs, cliffs, estuaries, river mouths, and urban infrastructure, providing applicability of the model to virtually any coastal setting. Aided by data assimilation, the model is able to reproduce the observed signal of seasonal shoreline change for the hindcast period of 1995-2010, showing excellent agreement between modeled and observed beach states. The skill of the model during the hindcast period improves confidence in the model's predictive capability when applied to the forecast period (2010-2100) driven by GCM-projected wave and sea-level conditions. Predictions of shoreline change with limited human intervention indicate that 31% to 67% of Southern California beaches may become completely eroded by 2100 under sea-level rise scenarios of 0.93 to 2.0 m.

California↗

USGS2017

Shallow microearthquakes near Chongqing, China triggered by the Rayleigh waves of the 2015 M7.8 Gorkha, Nepal earthquake

We present a case of remotely triggered seismicity in Southwest China by the 2015/04/25 M7.8 Gorkha, Nepal earthquake. A local magnitude ML3.8 event occurred near the Qijiang district south of Chongqing city approximately 12 min after the Gorkha mainshock. Within 30km of this ML3.8 event there are 62 earthquakes since 2009 and only 7 ML>3events, which corresponds to a likelihood of 0.3% for a ML>3on any given day by a random chance. This observation motivates us to investigate the relationship between the ML3.8 event and the Gorkha mainshock. The ML3.8 event is listed in the China Earthquake National Center (CENC) catalog and occurred at shallow depth (∼3km). By examining high-frequency waveforms, we identify a smaller local event (∼ML2.5) ∼15s before the ML3.8 event. Both events occurred during the first two cycles of the Rayleigh waves from the Gorkha mainshock. We perform seismic event detection based on envelope function and waveform matching by using the two events as templates. Both analyses found a statistically significant rate change during the mainshock, suggesting that they were indeed dynamically triggered by the Rayleigh waves. Both events occurred during the peak normal and dilatational stress changes (∼10–30 kPa), consistent with observations of dynamic triggering in other geothermal/volcanic regions. Although other recent events (i.e., the 2011 M9.1 Tohoku-Oki earthquake) produced similar peak ground velocities, the 2015 Gorkha mainshock was the only event that produced clear dynamic triggering in this region. The triggering site is close to hydraulic fracturing wells that began production in 2013–2014. Hence we suspect that fluid injections may increase the region’s susceptibility to remote dynamic triggering.

Chongqing↗

USGS2012

The hydrothermal system at Newberry Volcano, Oregon

Results of recent geological and geophysical studies at Newberry Volcano have been incorporated into conceptual and numerical models of a magma-based hydrothermal system. Numerical simulations begin with emplacement of a small magma body, the presumed source of silicic eruptions at Newberry that began about 10,000 B.P., into a thermal regime representing 100,000 years of cooling of a large underlying intrusion. Simulated flow patterns and thermal histories for three sets of hypothetical permeability values are compatible with data from four geothermal drill holes on the volcano. Meteoric recharge cools the caldera-fill deposits, but thermal water moving up a central conduit representing a permeable volcanic vent produces temperatures close to those observed in drill holes within the caldera. Meteoric recharge from the caldera moves down the flanks and creates a near-isothermal zone that extends several hundred meters below the water table, producing temperature profiles similar to those observed in drill holes on the flanks. The temperatures observed in drill holes on the flanks are not influenced by the postulated Holocene magma body. The elevated temperature gradients measured in the lower portions of these holes may be related to the cumulative effect of older intrusions. The models also indicate that meteoric recharge to the deep hydrothermal system probably originates within or near the caldera. Relatively low fluid velocities at depth suggest that at least a significant fraction of the thermal fluid may be very old.

Journal of Geophysical Research Solid Earth↗

USGS2007

Water on early Mars

Large flood channels, valley networks and a variety of features attributed to the action of ground ice indicate that Mars emerged from heavy bombardment 3.8 Ga ago, with an inventory of water at the surface equivalent to at least a few hundred metres spread over the whole planet, as compared with 3 km for the Earth. The mantle of Mars is much drier than that of the Earth, possibly as a result of global melting at the end of accretion and the lack of plate tectonics to subsequently reintroduce water into the interior. The surface water resided primarily in a porous, kilometres-thick megaregolith created by the high impact rates. Under today's climatic conditions groundwater is trapped below a thick permafrost zone. At the end of heavy bombardment any permafrost zone would have been much thinner because of the high heat flows, but climatic conditions may have been very different then, as suggested by erosion rates 1000 times higher than subsequent rates. Water trapped below the permafrost periodically erupted onto the surface to form large flood channels and lakes. Given abundant water at the surface and sustained volcanism, hydrothermal activity must have frequently occurred but we have yet to make the appropriate observations to detect the results of such activity.

CIBA Foundation Symposia↗

USGS2014

An analysis of the global spatial variability of column-averaged CO 2 from SCIAMACHY and its implications for CO 2 sources and sinks

Satellite observations of carbon dioxide (CO 2 ) are important because of their potential for improving the scientific understanding of global carbon cycle processes and budgets. We present an analysis of the column-averaged dry air mole fractions of CO 2 (denoted XCO 2 ) of the Scanning Imaging Absorption Spectrometer for Atmospheric Cartography (SCIAMACHY) retrievals, which were derived from a satellite instrument with relatively long-term records (2003–2009) and with measurements sensitive to the near surface. The spatial-temporal distributions of remotely sensed XCO 2 have significant spatial heterogeneity with about 6–8% variations (367–397 ppm) during 2003–2009, challenging the traditional view that the spatial heterogeneity of atmospheric CO 2 is not significant enough (<4%) to have any large effect on terrestrial ecosystem carbon cycles. By comparison with surface measurements from the NOAA Earth System Research Laboratory (ESRL) GLOBALVIEW network, significant statistical relationships between XCO 2 and surface CO 2 were found for major ecosystems, with the exception of tropical forest. In addition, when compared with a simulated terrestrial carbon uptake from the Integrated Biosphere Simulator (IBIS) and the Emissions Database for Global Atmospheric Research (EDGAR) carbon emission inventory, the latitudinal gradient of XCO 2 seasonal amplitude was influenced by the combined effect of terrestrial carbon uptake, carbon emission, and atmospheric transport, suggesting no direct implications for terrestrial carbon sinks. From the investigation of the growth rate of XCO 2 we found that the increase of CO 2 concentration was dominated by temperature in the northern hemisphere (20–90°N) and by precipitation in the southern hemisphere (20–90°S), with the major contribution to global average occurring in the northern hemisphere. These findings indicated that the satellite measurements of atmospheric CO 2 improve not only the estimations of atmospheric inversion, but also the understanding of the terrestrial ecosystem carbon dynamics and its feedback to atmospheric CO 2 .

International Journal of Remote Sensing↗

USGS2013

Users, uses, and value of Landsat satellite imagery: results from the 2012 survey of users

Landsat satellites have been operating since 1972, providing a continuous global record of the Earth’s land surface. The imagery is currently available at no cost through the U.S. Geological Survey (USGS). Social scientists at the USGS Fort Collins Science Center conducted an extensive survey in early 2012 to explore who uses Landsat imagery, how they use the imagery, and what the value of the imagery is to them. The survey was sent to all users registered with USGS who had accessed Landsat imagery in the year prior to the survey and over 11,000 current Landsat imagery users responded. The results of the survey revealed that respondents from many sectors use Landsat imagery in myriad project locations and scales, as well as application areas. The value of Landsat imagery to these users was demonstrated by the high importance of and dependence on the imagery, the numerous environmental and societal benefits observed from projects using Landsat imagery, the potential negative impacts on users’ work if Landsat imagery was no longer available, and the substantial aggregated annual economic benefit from the imagery. These results represent only the value of Landsat to users registered with USGS; further research would help to determine what the value of the imagery is to a greater segment of the population, such as downstream users of the imagery and imagery-derived products.

Open-File Report↗

USGS2018

Biocrusts: The living skin of the Earth

Biological soil crusts (biocrusts) form a “living skin” at the soil surface in many low productivity ecosystems around the world including water- and cold-limited environments, and early successional seres (Belnap et al. 2003). They may be composed of any configuration of soil surface-dwelling cyanobacteria, eukaryotic algae, lichens, mosses or liverworts, and support assemblages of decomposers and a faunal food web (Belnap et al. 2003). These soil surface communities have global relevance, as it has been recently estimated that they cover about 12% of the terrestrial surface currently (Rodriguez-Caballero et al. 2018). Biocrust communities are perhaps an ideal subject for the journal Plant and Soil, because they are simultaneously plant-like, due to their dominance by autotrophs, yet biocrusts are also clearly a physical feature of the soil given that component organisms are enmeshed in, adherent to, or otherwise in direct contact with the soil surface. The activity of the organisms is what engineers the well-aggregated thin layer at the soil surface that we recognize as a biocrust (Belnap et al. 2003). The contributions of biocrusts to ecosystem function has fueled much research interest, initially in the observation of biocrusts’ soil aggregating and erosion-resisting nature, and later as a multifunctional, globally-relevant ecosystem element instrumental in: 1. building or otherwise altering soil nutrient stocks through N-fixation (Elbert et al. 2012), dust trapping (Reynolds et al. 2001) and nutrient cycling (Strauss et al. 2012), 2. influencing hydrological properties of soil such as the water balance (Chamizo et al. 2016), and 3. The thermal energy balance of the ecosystem (Coradeau et al. 2016, Rutherford et al. 2017).

Plant and Soil↗

USGS2015

Strain accumulation across the Prince William Sound asperity, Southcentral Alaska

The surface velocities predicted by the conventional subduction model are compared to velocities measured in a GPS array (surveyed in 1993, 1995, 1997, 2000, and 2004) spanning the Prince William Sound asperity. The observed velocities in the comparison have been corrected to remove the contributions from postseismic (1964 Alaska earthquake) mantle relaxation. Except at the most seaward monument (located on Middleton Island at the seaward edge of the continental shelf, just 50 km landward of the deformation front in the Aleutian Trench), the corrected velocities qualitatively agree with those predicted by an improved, two-dimensional, back slip, subduction model in which the locked megathrust coincides with the plate interface identified by seismic refraction surveys, and the back slip rate is equal to the plate convergence rate. A better fit to the corrected velocities is furnished by either a back slip rate 20% greater than the plate convergence rate or a 30% shallower megathrust. The shallow megathrust in the latter fit may be an artifact of the uniform half-space Earth model used in the inversion. Backslip at the plate convergence rate on the megathrust mapped by refraction surveys would fit the data as well if the rigidity of the underthrust plate was twice that of the overlying plate, a rigidity contrast higher than expected. The anomalous motion at Middleton Island is attributed to continuous slip at near the plate convergence rate on a postulated, listric fault that splays off the megathrust at depth of about 12 km and outcrops on the continental slope south-southeast of Middleton Island.

Journal of Geophysical Research B: Solid Earth↗

USGS1996

Rheology of water ices V and VI

We have measured the mechanical strength (σ) of pure water ices V and VI under steady state deformation conditions. Constant displacement rate compressional tests were conducted in a gas apparatus at confining pressures from 400 < P < 800 MPa, temperatures from 209 < T < 270 K, and strain rates 7 × 10 −7 < < 7 × 10 −4 s −1 . Most of the results fit to an empirical flow law of the form = A σ n exp {−( E * + PV *)/ RT }, where the four material constants A , n , E *, and V * are (for in inverse seconds and P and σ in megapascals) 10 23.0 , 6.0, 136 kJ/mol, and 29 cm 3 /mol, respectively, for ice V; and 10 6.7 , 4.5, 66 kJ/mol, and 11 cm 3 /mol, respectively, for ice VI. Ice VI may weaken to a mechanism of higher E * at T > 250 K. Ices V and VI are thus rheologically distinct but by coincidence have approximately the same strength under the conditions chosen for these experiments. To avoid misidentification, these tests are therefore accompanied by careful observations of the occurrences and characteristics of phase changes. One sample each of ice V and VI was quenched at pressure to metastably retain the high-pressure phase and the acquired deformation microstructures; X ray diffraction analysis of these samples confirmed the phase identification. Surface replicas of the deformed and quenched samples suggest that ice V probably deforms largely by dislocation creep, while ice VI deforms by a more complicated process involving substantial grain size reduction through recrystallization.

Journal of Geophysical Research B: Solid Earth↗

USGS2010

Dacite petrogenesis on mid-ocean ridges: Evidence for oceanic crustal melting and assimilation

Whereas the majority of eruptions at oceanic spreading centers produce lavas with relatively homogeneous mid-ocean ridge basalt (MORB) compositions, the formation of tholeiitic andesites and dacites at mid-ocean ridges (MORs) is a petrological enigma. Eruptions of MOR high-silica lavas are typically associated with ridge discontinuities and have produced regionally significant volumes of lava. Andesites and dacites have been observed and sampled at several locations along the global MOR system; these include propagating ridge tips at ridge-transform intersections on the Juan de Fuca Ridge and eastern Gal??pagos spreading center, and at the 9??N overlapping spreading center on the East Pacific Rise. Despite the formation of these lavas at various ridges, MOR dacites show remarkably similar major element trends and incompatible trace element enrichments, suggesting that similar processes are controlling their chemistry. Although most geochemical variability in MOR basalts is consistent with low-pressure fractional crystallization of various mantle-derived parental melts, our geochemical data for MOR dacitic glasses suggest that contamination from a seawater-altered component is important in their petrogenesis. MOR dacites are characterized by elevated U, Th, Zr, and Hf, low Nb and Ta concentrations relative to rare earth elements (REE), and Al2O3, K2O, and Cl concentrations that are higher than expected from low-pressure fractional crystallization alone. Petrological modeling of MOR dacites suggests that partial melting and assimilation are both integral to their petrogenesis. Extensive fractional crystallization of a MORB parent combined with partial melting and assimilation of amphibole-bearing altered crust produces a magma with a geochemical signature similar to a MOR dacite. This supports the hypothesis that crustal assimilation is an important process in the formation of highly evolved MOR lavas and may be significant in the generation of evolved MORB in general. Additionally, these processes are likely to be more common in regions of episodic magma supply and enhanced magma-crust interaction such as at the ends of ridge segments. ?? The Author 2010. Published by Oxford University Press. All rights reserved.

Journal of Petrology↗

USGS2017

The interior structure of Ceres as revealed by surface topography

Ceres, the largest body in the asteroid belt (940 km diameter), provides a unique opportunity to study the interior structure of a volatile-rich dwarf planet. Variations in a planetary body's subsurface rheology and density affect the rate of topographic relaxation. Preferential attenuation of long wavelength topography (≥150 km) on Ceres suggests that the viscosity of its crust decreases with increasing depth. We present finite element (FE) geodynamical simulations of Ceres to identify the internal structures and compositions that best reproduce its topography as observed by the NASA Dawn mission. We infer that Ceres has a mechanically strong crust with maximum effective viscosity ∼10 25 Pa s. Combined with density constraints, this rheology suggests a crustal composition of carbonates or phyllosilicates, water ice, and at least 30 volume percent (vol.%) low-density, high-strength phases most consistent with salt and/or clathrate hydrates. The inference of these crustal materials supports the past existence of a global ocean, consistent with the observed surface composition. Meanwhile, we infer that the uppermost ≥60 km of the silicate-rich mantle is mechanically weak with viscosity <10 21 Pa s, suggesting the presence of liquid pore fluids in this region and a low temperature history that avoided igneous differentiation due to late accretion or efficient heat loss through hydrothermal processes.

Earth and Planetary Science Letters↗

USGS1998

Ductile shear zones beneath strike-slip faults: Implications for the thermomechanics of the San Andreas fault zone

We have carried out two-dimensional (2-D) numerical experiments on the bulk flow of a layer of fluid that is driven in a strike-slip sense by constant velocities applied at its boundaries. The fluid has the (linearized) conventional rheology assumed to apply to lower crust/upper mantle rocks. The temperature dependence of the effective viscosity of the fluid and the shear heating that accompanies deformation have been incorporated into the calculations, as has thermal conduction in an overlying crustal layer. Two end-member boundary conditions have been considered, corresponding to a strong upper crust driving a weaker ductile substrate and a strong ductile layer driving a passive, weak crust. In many cases of practical interest, shear heating is concentrated close to the axial plane of the shear zone for either boundary condition. For these cases, the resulting steady state temperature field is well approximated by a cylindrical heat source embedded in a conductive half-space at a depth corresponding to the top of the fluid layer. This approximation, along with the application of a theoretical result for one-dimensional shear zones, permits us to obtain simple analytical approximations to the thermal effects of 2-D ductile shear zones for a range of assumed rheologies and crustal geotherms, making complex numerical calculations unnecessary. Results are compared with observable effects on heat flux near the San Andreas fault using constraints on the slip distribution across the entire fault system. Ductile shearing in the lower crust or upper mantle can explain the observed increase in surface heat flux southeast of the Mendocino triple junction and match the amplitude of the regional heat flux anomaly in the California Coast Ranges. Because ductile dissipation depends only weakly on slip rate, faults moving only a few millimeters per year can be important heat sources, and the superposition of effects of localized ductile shearing on both currently active and now inactive strands of the San Andreas system can explain the breadth of the heat flux anomaly across central California.

Journal of Geophysical Research B: Solid Earth↗

USGS2021

The Traverse Ridge paleoseismic site and ruptures crossing the boundary between the Provo and Salt Lake City segments of the Wasatch fault zone, Utah, United States

How structural segment boundaries modulate earthquake behavior is an important scientific and societal question, especially for the Wasatch fault zone (WFZ) where urban areas lie along multiple fault segments. The extent to which segment boundaries arrest ruptures, host moderate magnitude earthquakes, or transmit ruptures to adjacent fault segments is critical for understanding seismic hazard. To help address this outstanding issue, we conducted a paleoseismic investigation at the Traverse Ridge paleoseismic site (TR site) along the ∼7-km-long Fort Canyon segment boundary, which links the Provo (59 km) and Salt Lake City (40 km) segments of the WFZ. At the TR site, we logged two trenches which were cut across sub-parallel traces of the fault, separated by ∼175 m. Evidence from these exposures leads us to infer that at least 3 to 4 earthquakes have ruptured across the segment boundary in the Holocene. Radiocarbon dating of soil material developed below and above fault scarp colluvial packages and within a filled fissure constrains the age of the events. The most recent event ruptured the southern fault trace between 0.2 and 0.4 ka, the penultimate event ruptured the northern fault trace between 0.6 and 3.4 ka, and two prior events occurred between 1.4 and 6.2 ka (on the southern fault trace) and 7.2 and 8.1 ka (northern fault trace). Colluvial wedge heights of these events ranged from 0.7 to 1.2 m, indicating the segment boundary experiences surface ruptures with more than 1 m of vertical displacement. Given these estimates, we infer that these events were greater than Mw 6.7, with rupture extending across the entire segment boundary and portions of one or both adjacent fault segments. The Holocene recurrence of events at the TR site is lower than the closest paleoseismic sites at the adjacent fault segment endpoints. The contrasts in recurrence rates observed within 15 km of the Fort Canyon fault segment boundary may be explained conceptually by a leaky segment boundary model which permits spillover events, ruptures centered on the segment boundary, and segmented ruptures. The TR site demonstrates the utility of paleoseismology within segment boundaries which, through corroboration of displacement data, can demonstrate rupture connectivity between fault segments and test the validity of rupture models.

Utah↗

USGS2023

Colorado River Basin Actionable and Strategic Integrated Science and Technology Project—Science strategy

The U.S. Geological Survey (USGS) conducts a wide variety of science that improves understanding of droughts and their effects on ecosystems and society. This work includes data collection and monitoring of aquatic and terrestrial systems; assessment and analysis of patterns, trends, drivers, and impacts of drought; development and application of predictive models; and delivery of information and decision-making tools to stakeholders. Stakeholders, which include Federal, Tribal, State, and local agencies, nongovernmental organizations, and others, use this information to anticipate, assess, react to, and mitigate drought conditions and impacts. There is no obvious near-term solution to reduce the frequency and severity of droughts or to mitigate drought impacts. Multidecadal drought is a “grand challenge” that benefits from integration of existing technologies, data, knowledge, and models across related and disparate disciplines, facilitated by new science and technology. In response, the USGS initiated a new integrated-science approach in the Colorado River Basin in 2020. The Colorado River Basin was specifically selected because of concerns about future drought and its consequences for the region. This document explains how the Colorado River Basin Actionable and Strategic Integrated Science and Technology (ASIST) project extends and enhances the science supported by USGS Mission Areas and Programs and articulates scientific gaps and stakeholder needs to identify and reduce drought risks. The approach seeks to answer complex Earth science questions developed in partnership with stakeholders about severe long-term drought. An integrated approach is required to tackle these complex questions, which any single science discipline cannot answer on its own. In addition to increased understanding of drought and drought effects in complex systems, the Colorado River Basin ASIST project was designed to improve efficiencies through rapid location of a broad array of data sources, assembly of model-ready multidisciplinary data, and delivery of actionable science to stakeholders at the speeds and scales needed for decision making. The project team identified the following actions needed for USGS to implement and advance an integrated science approach in the Colorado River Basin: (1) engage with stakeholders to document their needs and iteratively co-produce science and science delivery tools to address these needs, (2) integrate monitoring and observation systems developed by USGS and other agencies that track droughts and their effects, (3) collect and provide analysis-ready data to support integrated applications, (4) integrate data and model connections to predict multiple drought impacts, (5) conduct multidisciplinary coordination to improve interpretations, (6) leverage the knowledge base across USGS to enhance decision making, and (7) support the development of new integrated science approaches and technologies that provide analysis and management tools that can be used to adapt to the effects of drought in the Colorado River Basin. Proposals for initial short-term use-case projects were solicited, a subset of which was selected for funding to test implementation of these actions. Additionally, the project organized and convened a series of science and technology collaboration workshops in the USGS focused on challenges that were identified and prioritized by the short-term use-case projects and during the initial stakeholder analysis. These workshops were designed to bring together diverse perspectives to discuss science and technology challenges, stakeholder needs, capabilities, and knowledge gaps, with the goal of determining how the USGS can address challenges, identify future opportunities for continued engagement between participants, and inform the next steps for the Colorado River Basin ASIST project. Continuing to collaboratively engage with a wide range of stakeholders using an integrated approach will provide a suitable foundation of data and tools to formulate actionable intelligence for predicting droughts and informing adaptation to the effects of long-term drought in a holistic, timely, and effective manner.

Arizona, California, Colorado, Nevada, New Mexico,↗

USGS2008

Fiber‐optic distributed temperature sensing: A new tool for assessment and monitoring of hydrologic processes

Fiber‐optic distributed temperature sensing (FO DTS) is an emerging technology for characterizing and monitoring a wide range of important earth processes. FO DTS utilizes laser light to measure temperature along the entire length of standard telecommunications optical fibers. The technology can measure temperature every meter over FO cables up to 30 kilometers (km) long. Commercially available systems can measure fiber temperature as often as 4 times per minute, with thermal precision ranging from 0.1 to 0.01 °C depending on measurement integration time. In 2006, the U.S. Geological Survey initiated a project to demonstrate and evaluate DTS as a technology to support hydrologic studies. This paper demonstrates the potential of the technology to assess and monitor hydrologic processes through case‐study examples of FO DTS monitoring of stream‐aquifer interaction on the Shenandoah River near Locke's Mill, Virginia, and on Fish Creek, near Jackson Hole, Wyoming, and estuary‐aquifer interaction on Waquoit Bay, Falmouth, Massachusetts. The ability to continuously observe temperature over large spatial scales with high spatial and temporal resolution provides a new opportunity to observe and monitor a wide range of hydrologic processes with application to other disciplines including hazards, climate‐change, and ecosystem monitoring.

Conference Paper↗