SEARCH · Geology Reports

Results for “Wildfire”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9Linked to original sources

USGS2012

Hyper-dry conditions provide new insights into the cause of extreme floods after wildfire

A catastrophic wildfire in the foothills of the Rocky Mountains near Boulder, Colorado provided a unique opportunity to investigate soil conditions immediately after a wildfire and before alteration by rainfall. Measurements of near-surface (< 6 cm) soil properties (temperature, volumetric soil-water content, θ ; and matric suction, ψ ), rainfall, and wind velocity were started 8 days after the wildfire began. These measurements established that hyper-dryconditions ( θ < ~ 0.02 cm 3 cm -3 ; ψ > ~ 3 x 10 5 cm) existed and provided an in-situ retention curve for these conditions. These conditions exacerbate the effects of water repellency (natural and fire-induced) and limit the effectiveness of capillarity and gravity driven infiltration into fire-affected soils. The important consequence is that given hyper-dryconditions, the critical rewetting process before the first rain is restricted to the diffusion–adsorption of water-vapor. This process typically has a time scale of days to weeks (especially when the hydrologic effects of the ash layer are included) that is longer than the typical time scale (minutes to hours) of some rainstorms, such that under hyper-dryconditions essentially no rain infiltrates. The existence of hyper-dryconditions provides insight into why, frequently during the first rain storm after a wildfire, nearly all rainfall becomes runoff causing extremefloods and debris flows.

Colorado↗

USGS2018

Post-wildfire landscape change and erosional processes from repeat terrestrial lidar in a steep headwater catchment, Chiricahua Mountains, Arizona, USA

Flooding and erosion after wildfires present increasing hazard as climate warms, semi-arid lands become drier, population increases, and the urban interface encroaches farther into wildlands. We quantify post-wildfire erosion in a steep, initially unchannelized, 7.5 ha headwater catchment following the 2011 Horseshoe 2 Fire in the Chiricahua Mountains of southeastern Arizona. Using time-lapse cameras, rain gauges, and repeat surveys by terrestrial laser scanner, we quantify the response of a burned landscape to subsequent precipitation events. Repeat surveys provide detailed pre-and post-rainfall measurements of landscape form associated with a range of weather events. The first post-fire precipitation led to sediment delivery equivalent to 0.017 m of erosion from hillslopes and 0.12 m of erosion from colluvial hollows. Volumetrically, 69% of sediment yield was generated from hillslope erosion and 31% was generated from gully channel establishment in colluvial hollows. Processes on hillslopes included erosion by extensive shallow overland flow, formation of rills and gullies, and generation of sediment-laden flows and possibly debris flows. Subsequent smaller rain events caused ongoing hillslope erosion and local deposition and erosion in gullies. Winter freeze-thaw led to soil expansion, likely related to frost-heaving, causing a net centimeter-scale elevation increase across soil-mantled slopes. By characterizing landscape form, the properties of near-surface materials, and measuring both precipitation and landscape change, we can improve our empirical understanding of landscape response to environmental forcing. This detailed approach to studying landscape response to wildfires may be useful in the improvement of predictive models of flood, debris flow and sedimentation hazards used in post-wildfire response assessments and land management, and may help improve process-based models of landscape evolution.

Arizona↗

USGS2017

The importance of building construction materials relative to other factors affecting structure survival during wildfire

Structure loss to wildfire is a serious problem in wildland-urban interface areas across the world. Laboratory experiments suggest that fire-resistant building construction and design could be important for reducing structure destruction, but these need to be evaluated under real wildfire conditions, especially relative to other factors. Using empirical data from destroyed and surviving structures from large wildfires in southern California, we evaluated the relative importance of building construction and structure age compared to other local and landscape-scale variables associated with structure survival. The local-scale analysis showed that window preparation was especially important but, in general, creating defensible space adjacent to the home was as important as building construction. At the landscape scale, structure density and structure age were the two most important factors affecting structure survival, but there was a significant interaction between them. That is, young structure age was most important in higher-density areas where structure survival overall was more likely. On the other hand, newer-construction structures were less likely to survive wildfires at lower density. Here, appropriate defensible space near the structure and accessibility to major roads were important factors. In conclusion, community safety is a multivariate problem that will require a comprehensive solution involving land use planning, fire-safe construction, and property maintenance.

International Journal of Disaster Risk Reduction↗

USGS2025

Reliability of satellite-based vegetation maps for planning wildfire-fuel treatments in shrub steppe: Inferences from two contrasting national parks

Protecting habitat threatened by increasing wildfire size and frequency requires identifying the spatial intersection of wildfire behavior and ecological conditions that favor positive management outcomes. In the perennial sagebrush steppe of Western North America, invasions by fire-prone annual grasses are a key concern, and management of them requires reliable maps of vegetation cover, fuels, and wildfire behavior. We compared commonly used, publicly available vegetation cover and fuels maps, specifically the Rangeland Analysis Platform (RAP) and LANDFIRE, with field-based assessments at two U.S. National Parks dominated by sagebrush steppe: City of Rocks National Reserve and Craters of the Moon National Monument and Preserve. Plant-community composition and fuels measured at ∼1700 field locations spanning ∼300,000 ha revealed that 1) RAP generally underestimated each vegetation cover type where the cover was actually abundant, and conversely overestimated cover types where they were actually scarce, and 2) there was considerable disagreement in fuel-bed maps derived from LANDFIRE compared to field observations. As a result, there were substantial discrepancies in the spatial patterning of wildfire behavior estimated from the fire-spread model FLAMMAP when parameterized with LANDFIRE compared to field-based fuel-bed maps created from Random Forests models. Reliable maps of vegetation cover and fuel conditions are needed to help guide fuels and invasive species management, especially given recent increases in pre- and post-fire treatments in arid and semiarid landscapes. The costs associated with poorly informed fuel reduction may greatly exceed the costs of field-based vegetation and fuels inventory to inform effective design of vegetative fuels treatments.

Idaho↗

USGS2024

Wildfires influence mercury transport, methylation, and bioaccumulation in headwater streams of the Pacific Northwest

The increasing frequency and severity of wildfires are among the most visible impacts of climate change. However, the effects of wildfires on mercury (Hg) transformations and bioaccumulation in stream ecosystems are poorly understood. We sampled soils, water, sediment, in-stream leaf litter, periphyton, and aquatic invertebrates in 36 burned (one-year post fire) and 21 reference headwater streams across the northwestern U.S. to evaluate the effects of wildfire occurrence and severity on total Hg (THg) and methylmercury (MeHg) transport and bioaccumulation. Suspended particulate THg and MeHg concentrations were 89 and 178% greater in burned watersheds compared to unburned watersheds and increased with burn severity, likely associated with increased soil erosion. Concentrations of filter-passing THg were similar in burned and unburned watersheds, but filter-passing MeHg was 51% greater in burned watersheds, and suspended particles in burned watersheds were enriched in MeHg but not THg, suggesting higher MeHg production in burned watersheds. Among invertebrates, MeHg in grazers, filter-feeders, and collectors was 33, 48, and 251% greater in burned watersheds, respectively, but did not differ in shredders or predators. Thus, increasing wildfire frequency and severity may yield increased MeHg production, mobilization, and bioaccumulation in headwaters and increased transport of particulate THg and MeHg to downstream environments.

Idaho, Oregon, Washington↗

USGS2024

Intersection of wildfire and legacy mining poses risk to water quality

Mining and wildfires are both landscape disturbances that pose elevated and substantial hazards to water supplies and ecosystems due to increased erosion and transport of sediment, metals, and debris to downstream waters. The risk to water supplies may be amplified when these disturbances occur in the same watershed. This work describes mechanisms by which the intersection of mining and wildfire may lead to elevated metal concentrations in downstream waters: (1) conveyance of metal-rich ash and soil to surface waters, (2) increased dissolution and transport of dissolved metals due to direct contact of precipitation with mine waste, (3) increased erosion and transport of metal-rich sediment from mining waste, (4) remobilization of previously deposited metal-contaminated floodplain sediment by higher postfire flood flows, and (5) increased metal transport from underground mine workings. Predicted increases in wildfire size, frequency, and burn severity, together with the ongoing need for metal resources, indicate that improved mapping, monitoring, modeling, and mitigation techniques are needed to manage the geochemical hazard of the intersection of wildfire and mining and implications for water availability.

Environmental Science and Technology↗

USGS2022

Multi-stage soil-hydraulic recovery and limited ravel accumulations following the 2017 Nuns and Tubbs wildfires in Northern California

Wildfire can impact soil-hydraulic properties by reducing saturated hydraulic conductivity and sorptivity, making recently burned landscapes prone to debris flows and flash floods. The post-fire hazard window can range from years to decades. In Northern California, where wildfire frequency is steadily increasing, the impact and soil-hydraulic recovery from wildfires is unknown. Following the October 2017 Nuns and Tubbs fires in the Northern Bay Area of California, we established 41 monitoring sites for repeat tension-disc infiltrometer measurements of field-saturated hydraulic conductivity ( K fs ) over 3.5 years. Our site arrays, which encompass grasslands, chaparral, and oak and conifer forests across a range in lithology, show a marked decrease in K fs following the wildfires and a swift partial recovery following the initial post-fire rainy season. Our time series reveals a complex path to soil-hydraulic recovery marked by distinct seasonal stages. Analysis of changing K fs , sorptivity, and infiltration model residuals collectively suggests that these stages are related to transitions between soil-hydraulic processes like structural soil sealing from rainsplash, thermal cracking of bare soil, and vegetation regrowth. While soil infiltration rates were strongly impacted by the 2017 fires, dry ravel estimates are an order of magnitude less for similar slopes than the 2009 Station fire in the San Gabriel mountains of Southern California, suggesting that limited ravel flux may insufficiently load channels for debris flows that initiate from within-channel failure. Our analysis suggests that burned landscapes in the Northern Bay Area of California may experience rapid soil-hydraulic recovery and limited pathways toward post-fire debris flow initiation.

California↗

USGS2024

A conceptual framework to assess post-wildfire water quality: State of the science and knowledge gaps

Wildfire substantially alters aquatic ecosystems by inducing moderate to catastrophic physical and chemical changes. However, the relations of environmental and watershed variables that drive those effects are complex. We present a Driver-Factor-Stressor-Effect (DFSE) conceptual framework to assess the current state of the science related to post-wildfire water-quality. We reviewed 64 peer-reviewed papers using the DFSE framework to identify drivers, factors, stressors, and effects associated with each study. A total of five drivers were identified and ranked according to their frequency of occurrence in the literature: atmospheric processes > fire characteristics > ecologic processes and characteristics > land surface characteristics > soil characteristics. Commonly reported stressors include increased nutrients, runoff, and sediment transport. Furthermore, although several different factors have been used at least once to explain water-quality effects, relatively few factors outside of precipitation and fire characteristics are frequently studied. We identified several gaps indicating the need for long-term monitoring, multi-factor studies, consideration of organic contaminants, consideration of groundwater, and inclusion of soil characteristics. This assessment expands on other reviews and meta-analyses by exploring causal linkages between influential variables and overall effects in post-wildfire watersheds. Information gathered from our assessment and the framework itself can be used to inform future monitoring plans and as a guide for modeling efforts focused on better understanding specific processes or to mitigate potential risks of post-wildfire water quality.

Water Resources Research↗

USGS2024

Quantifying aspect-dependent snowpack response to high-elevation wildfire in the southern Rocky Mountains

Increasing wildfire frequency and severity in high-elevation seasonal snow zones presents a considerable water resource management challenge across the western United States (U.S.). Wildfires can affect snowpack accumulation and melt patterns, altering the quantity and timing of runoff. While prior research has shown that wildfire generally increases snow melt rates and advances snow disappearance dates, uncertainties remain regarding variations across complex terrain and the energy balance between burned and unburned areas. Utilizing paired in situ data sources within the 2020 Cameron Peak burn area on the Front Range of Colorado, U.S., during the 2021–2022 winter, we found no significant difference in peak snow water equivalent (SWE) magnitude between burned and unburned areas. However, the burned south aspect reached peak SWE 22 days earlier than burned north. During the ablation period, burned south melt rates were 71% faster than unburned south melt rates, whereas burned north melt rates were 94% faster than unburned north aspects. Snow disappeared 7–11 days earlier in burned areas than unburned areas. Net energy differences at the burned and unburned weather station sites were seasonally variable, the burned area snowpack lost more net energy during the winter, but gained more net energy during the spring. Increased incoming shortwave radiation at the burned site was 6 x more impactful in altering the net shortwave radiation balance than the decline in surface albedo. These findings emphasize the need for post-wildfire water resource planning that accounts for aspect-dependent differences in energy and mass balance to accurately predict snowpack storage and runoff timing.

Colorado↗

USGS2026

Previous prescribed burns saved thousands of ancient sequoias during historically unprecedented wildfires

Wildfires in California’s Sierra Nevada during 2020–2021 killed giant sequoias ( Sequoiadendron giganteum ) at rates unseen for millennia, underscoring the vulnerability of highly fire-adapted trees to ongoing environmental change. Following a century of fire exclusion and fuel accumulation, the effectiveness of prescribed burns in reducing giant sequoia mortality from wildfire remained poorly quantified. Here we estimate mortality outcomes for 26,403 giant sequoias across 19 groves in Sequoia and Kings Canyon national parks following the Castle (2020) and KNP Complex (2021) wildfires using a Bayesian framework. We map tree mortality using a deep learning classifier integrating 3 m PlanetScope imagery, airborne lidar, and field observations. From an estimated 7,974 sequoia deaths (95% Bayesian credible interval (CI): 7,555–8,430), corresponding to 30.2% mortality (CI: 28.6–31.9%), we find previous prescribed burns (≤10 years prior) reduced mortality odds by 77% (CI: 69–83%), making treated trees nearly four times more likely to survive. Counterfactual simulations suggest that prescribed burns prevented at least 1,888 (CI: 1,487–2,302) deaths, and universal treatment would have saved an additional 3,888 (CI: 3,236–4,580) giant sequoias. These results show that prescribed burns substantially improve survival during extreme wildfires, offering guidance for conserving long-lived, fire-adapted forests under intensifying fire regimes.

California↗

USGS2018

Estimating post-fire debris-flow hazards prior to wildfire using a statistical analysis of historical distributions of fire severity from remote sensing data

Following wildfire, mountainous areas of the western United States are susceptible to debris flow during intense rainfall. Convective storms that can generate debris flows in recently burned areas may occur during or immediately after the wildfire, leaving insufficient time for development and implementation of risk mitigation strategies. We present a method for estimating post-fire debris-flow hazards prior to wildfire using historical data to define the range of potential fire severities for a given location based on the statistical distribution of severity metrics obtained from remote sensing. Estimates of debris-flow likelihood, magnitude, and triggering rainfall threshold based upon the statistically simulated fire severity data provide hazard predictions consistent with those calculated from fire severity data collected after wildfire. Simulated fire severity data also produce hazard estimates that replicate observed debris-flow occurrence, rainfall conditions, and magnitude at a monitored site in the San Gabriel Mountains of southern California. Future applications of this method should rely upon a range of potential fire severity scenarios for improved pre-fire estimates of debris-flow hazard. The method presented here is also applicable to modeling other post-fire hazards, such as flooding and erosion risk, and for quantifying trends in observed fire severity in a changing climate.

California, Colorado, Washington↗

USGS2025

Evaluating a simulation-based wildfire burn probability map for the conterminous US

Background Wildfire simulation models are used to derive maps of burn probability (BP) based on fuels, weather, topography and ignition locations, and BP maps are key components of wildfire risk assessments. Aims Few studies have compared BP maps with real-world fires to evaluate their suitability for near-future risk assessment. Here, we evaluated a BP map for the conterminous US based on the large fire simulation model FSim. Methods We compared BP with observed wildfires from 2016 to 2022 across 128 regions representing similar fire regimes (‘pyromes’). We evaluated the distribution of burned areas across BP values, and compared burned area distributions among fire size classes. Key results Across all pyromes, mean BP was moderately correlated with observed burned area. An average of 71% of burned area occurred in higher-BP classes, vs 79% expected. BP underpredicted burned area in the Mountain West, especially for extremely large fires. Conclusions The FSim BP map was useful for estimating subsequent wildfire hazard, but may have underestimated burned areas where input data did not reflect recent climate change, vegetation change or human ignition patterns. Implications Our evaluations indicate that caution is needed when relying on simulation-based BP maps to inform management decisions. Our results also highlight potential opportunities to improve model estimates.

Conterminous United States↗

USGS2018

Rapid growth of the US wildland-urban interface raises wildfire risk

The wildland-urban interface (WUI) is the area where houses and wildland vegetation meet or intermingle, and where wildfire problems are most pronounced. Here we report that the WUI in the United States grew rapidly from 1990 to 2010 in terms of both number of new houses (from 30.8 to 43.4 million; 41% growth) and land area (from 581,000 to 770,000 km 2 ; 33% growth), making it the fastest-growing land use type in the conterminous United States. The vast majority of new WUI areas were the result of new housing (97%), not related to an increase in wildland vegetation. Within the perimeter of recent wildfires (1990–2015), there were 286,000 houses in 2010, compared with 177,000 in 1990. Furthermore, WUI growth often results in more wildfire ignitions, putting more lives and houses at risk. Wildfire problems will not abate if recent housing growth trends continue.

Proceedings of the National Academy of Sciences↗

USGS2018

Wildland–urban interface residents’ relationships with wildfire: Variation within and across communities

Social science offers rich descriptions of relationships between wildland–urban interface residents and wildfire, but syntheses across different contexts might gloss over important differences. We investigate the potential extent of such differences using data collected consistently in sixty-eight Colorado communities and hierarchical modeling. We find substantial variation across responses for all considered measures, much of which occurs at the community-level. Our results show that many aspects of relationships with wildfire meaningfully differ both within and across communities. Our analysis suggests that some wildfire social science results will be relatively consistent across communities, whereas others will not, and this study contributes evidence to broader efforts for understanding which is which. As such, it provides important guidance for transferring the lessons of wildfire social science studies across contexts, and for practitioners who seek to understand the breadth of viewpoints within the communities with which they work.

Colorado↗

USGS2008

Interactive effects of wildfire and permafrost on microbial communities and soil processes in an Alaskan black spruce forest

Boreal forests contain significant quantities of soil carbon that may be oxidized to CO2 given future increases in climate warming and wildfire behavior. At the ecosystem scale, decomposition and heterotrophic respiration are strongly controlled by temperature and moisture, but we questioned whether changes in microbial biomass, activity, or community structure induced by fire might also affect these processes. We particularly wanted to understand whether postfire reductions in microbial biomass could affect rates of decomposition. Additionally, we compared the short-term effects of wildfire to the long-term effects of climate warming and permafrost decline. We compared soil microbial communities between control and recently burned soils that were located in areas with and without permafrost near Delta Junction, AK. In addition to soil physical variables, we quantified changes in microbial biomass, fungal biomass, fungal community composition, and C cycling processes (phenol oxidase enzyme activity, lignin decomposition, and microbial respiration). Five years following fire, organic surface horizons had lower microbial biomass, fungal biomass, and dissolved organic carbon (DOC) concentrations compared with control soils. Reductions in soil fungi were associated with reductions in phenol oxidase activity and lignin decomposition. Effects of wildfire on microbial biomass and activity in the mineral soil were minor. Microbial community composition was affected by wildfire, but the effect was greater in nonpermafrost soils. Although the presence of permafrost increased soil moisture contents, effects on microbial biomass and activity were limited to mineral soils that showed lower fungal biomass but higher activity compared with soils without permafrost. Fungal abundance and moisture were strong predictors of phenol oxidase enzyme activity in soil. Phenol oxidase enzyme activity, in turn, was linearly related to both 13C lignin decomposition and microbial respiration in incubation studies. Taken together, these results indicate that reductions in fungal biomass in postfire soils and lower soil moisture in nonpermafrost soils reduced the potential of soil heterotrophs to decompose soil carbon. Although in the field increased rates of microbial respiration can be observed in postfire soils due to warmer soil conditions, reductions in fungal biomass and activity may limit rates of decomposition. ?? 2008 The Authors Journal compilation ?? 2008 Blackwell Publishing.

Global Change Biology↗

USGS2011

The application of prototype point processes for the summary and description of California wildfires

A method for summarizing repeated realizations of a space‐time marked point process, known as prototyping, is discussed and applied to catalogues of wildfires in California. Prototype summaries are constructed for varying time intervals using California wildfire data from 1990 to 2006. Previous work on prototypes for temporal and space‐time point processes is extended here to include methods for computing prototypes with marks and the incorporation of prototype summaries into hierarchical clustering algorithms, the latter of which is used to delineate fire seasons in California. Other results include summaries of patterns in the spatial‐temporal distribution of wildfires within each wildfire season.

California↗

USGS2007

An estimate of carbon emissions from 2004 wildfires across Alaskan Yukon River Basin

Background Wildfires are an increasingly important component of the forces that drive the global carbon (C) cycle and climate change as progressive warming is expected in boreal areas. This study estimated C emissions from the wildfires across the Alaskan Yukon River Basin in 2004. We spatially related the firescars to land cover types and defined the C fractions of aboveground biomass and the ground layer (referring to the top 15 cm organic soil layer only in this paper) consumed in association with land cover types, soil drainage classes, and the C stocks in the ground layer. Results The fires led to a burned area of 26,500 km 2 and resulted in the total C emission of 81.1 ± 13.6 Tg (Tg, Teragram; 1 Tg = 10 12 g) or 3.1 ± 0.7 kg C m -2 burned. Of the total C emission, about 73% and 27% could be attributed to the consumption of the ground layer and aboveground biomass, respectively. Conclusion The predominant contribution of the ground layer to the total C emission implies the importance of ground fuel management to the control of wildfires and mitigation of C emissions. The magnitude of the total C emission depends on fire extent, while the C loss in kg C m -2 burned is affected strongly by the ground layer and soil drainage condition. The significant reduction in the ground layer by large fires may result in profound impacts on boreal ecosystem services with an increase in feedbacks between wildfires and climate change.

Carbon Balance and Management↗

USGS2017

Potential influence of wildfire in modulating climate-induced forest redistribution in a central Rocky Mountain landscape

Introduction Climate change is expected to impose significant tension on the geographic distribution of tree species. Yet, tree species range shifts may be delayed by their long life spans, capacity to withstand long periods of physiological stress, and dispersal limitations. Wildfire could theoretically break this biological inertia by killing forest canopies and facilitating species redistribution under changing climate. We investigated the capacity of wildfire to modulate climate-induced tree redistribution across a montane landscape in the central Rocky Mountains under three climate scenarios (contemporary and two warmer future climates) and three wildfire scenarios (representing historical, suppressed, and future fire regimes). Methods Distributions of four common tree species were projected over 90 years by pairing a climate niche model with a forest landscape simulation model that simulates species dispersal, establishment, and mortality under alternative disturbance regimes and climate scenarios. Results Three species (Douglas-fir, lodgepole pine, subalpine fir) declined in abundance over time, due to climate-driven contraction in area suitable for establishment, while one species (ponderosa pine) was unable to exploit climate-driven expansion of area suitable for establishment. Increased fire frequency accelerated declines in area occupied by Douglas-fir, lodgepole pine, and subalpine fir, and it maintained local abundance but not range expansion of ponderosa pine. Conclusions Wildfire may play a larger role in eliminating these conifer species along trailing edges of their distributions than facilitating establishment along leading edges, in part due to dispersal limitations and interspecific competition, and future populations may increasingly depend on persistence in locations unfavorable for their establishment.

Idaho↗