Technique for concentrating nannoplankton from the Tertiary rocks of the California Coast and Peninsular Ranges
No abstract available.
Journal of Research of the U.S. Geological Survey↗
SEARCH · Geology Reports
Results for “The Mountain Geologist”
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The U.S. Geological Survey, the U.S. Department of Defense, and the U.S. Intelligence Community—100 years of mapping and remote sensing collaboration, 1879–1979
Introduction The U.S. Geological Survey (USGS)—a Federal civilian agency—and U.S. military and intelligence agencies collaborate on mapping and remote sensing and have since the establishment of the USGS. The organizations exchange data and information and share technology to further their respective missions in service to the American people. Often referred to as examples of “good government” or “whole of government,” the collaboration avoids costly duplication and maximizes time and effort for the government sectors. Collaboration between these sectors started with the original mapping of the United States and evolved to include remote sensing after the advent of aerial photography and satellite imagery.
Circular↗
Characterization of the hydrogeologic framework, groundwater-flow system, geochemistry, and aquifer hydraulic properties of the shallow groundwater system in the Wilcox and Lorraine process areas of the Wilcox Oil Company Superfund site near Bristow, Oklahoma, 2022
The Wilcox Oil Company Superfund site (hereinafter referred to as “the site”) was formerly an oil refinery northeast of Bristow in Creek County, Oklahoma. Historical refinery operations contaminated the soil, surface water, streambed sediments, alluvium, and groundwater with refined and stored products at the site. The Wilcox and Lorraine process areas are where the highest concentrations of volatile organic compounds, semivolatile organic compounds, polycyclic aromatic hydrocarbons, and trace elements (including metals) (collectively hereinafter referred to as “contaminants”) were measured in a local shallow perched groundwater system within the alluvium (hereinafter referred to as the “alluvial aquifer”) at the site during previous site assessments. In order to understand the potential migration of contaminants through the soil and groundwater in these areas, the U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency, investigated aquifer characteristics of the alluvial aquifer in the Wilcox and Lorraine process areas of the site to (1) document hydraulic conductivity and other aquifer characteristics of the alluvial aquifer that govern contaminant fate and transport, (2) describe the geospatial extent and concentration of the contaminants in the alluvial aquifer in the Wilcox and Lorraine process areas, and (3) describe the geochemical controls pertaining to oxidation and reduction governing the fate and transport and the degradation potential of contaminants in the groundwater. Various data were compiled and collected to evaluate the aquifer characteristics at the site including the hydrogeologic framework, groundwater-flow system, geochemistry, and hydraulic properties of the aquifer. A total of 20 new (2022) groundwater monitoring wells were installed at the site to collect data used to supplement groundwater-level altitude and groundwater-quality data collected from older, existing groundwater monitoring wells and piezometers. Data compiled and collected for the study were used to evaluate the characteristics of the alluvial aquifer at the site. These aquifer characteristics are defined by the hydrogeologic framework, groundwater-flow system, geochemistry, and hydraulic properties of the aquifer.
Oklahoma↗
Methodology for compilation of previously published contour data showing the altitude of the base of Dakota Sandstone on the Colorado Plateau, Arizona, Colorado, New Mexico, and Utah
Structure contours and other geologic information from numerous published geologic maps were digitized and compiled into a digital dataset showing the configuration of a single stratigraphic datum, the base of the Dakota Sandstone and its equivalents across the Colorado Plateau. The principal maps compiled in digital form are a series of 1:250,000-scale 1 degree (°) × 2° quadrangle maps published by the U.S. Geological Survey, augmented by other geologic maps published at various map scales. The compiled digital dataset contains geologic map polygons of the Dakota Sandstone and regional stratigraphic equivalents, the location of faults and fold axes, structure contour lines that define the altitude of the base of the unit and bedding orientation data computed from the structure contour lines. This report provides the scientific rationale for compilation of these data and describes the compilation methodology for each of the data elements. This report provides an extended description of the data compilation in a companion U.S. Geological Survey digital data release of spatial data and attributes associated with the contoured surface and associated geologic data layers.
Arizona, Colorado, New Mexico, Utah↗
Utilizing downhole datasets for modelling the aeromagnetic signature of the Iron Creek Co-Cu deposit in the Idaho Cobalt Belt
The Idaho Cobalt Belt in east-central Idaho is host to some of the largest domestic Co resources, including the informal Iron Creek deposit. The two main ore zones of this deposit, the Iron Creek and the Ruby, are hosted in greenschist-grade interbedded argillite/siltstone and quartz-rich units of the Mesoproterozoic Apple Creek Formation of Lemhi Group. The primary ore mineral is cobalt-bearing pyrite, which occurs with pyrrhotite, chalcopyrite, and magnetite. This study integrates mineralogical and core-scale geophysical measurements with regional-scale aeromagnetic surveys. The high magnetite content within the Ruby zone produces elevated magnetic susceptibility, but the relatively limited spatial footprint of the ore zone would produce a small-scale anomaly that may be overlooked in regional surveys. The low magnetite content in the Iron Creek zone results in low magnetic susceptibility, creating a relatively low amplitude geophysical response. By characterizing the magnetic properties and mineralogy of these ore zones, this study enhances the interpretation of aeromagnetic data, enabling the identification of small or faint anomalies as potential Co targets. These findings improve can improve exploration strategies, both within the Idaho Cobalt Belt as well as for similar deposit types globally.
Idaho↗
Geologic framework and hydrostratigraphy of the Edwards and Trinity aquifers within Hays County, Texas
During 2023–24, the U.S. Geological Survey, in cooperation with the Edwards Aquifer Authority, revised a previous publication of the geologic framework and hydrostratigraphy of the Edwards and Trinity aquifers that was completed during 2018 within Hays County, Texas. The purpose of this report is to present the updated geologic framework and hydrostratigraphy of the rocks containing the Edwards and Trinity aquifers in Hays County from field observations of the surficial expressions of the rocks. The report includes a detailed 1:24,000-scale hydrostratigraphic map with names and descriptions of the geologic framework and hydrostratigraphic units (HSUs) in the study area. The study includes updates to the interpretation of the Kainer Formation of the Edwards Group with the addition of a burrowed unit between the basal nodular and dolomitic members. Hydrostratigraphy was also updated with the addition of the Seco Pass HSU for the burrowed member of the Kainer Formation. The study also includes updates to the interpretation of the hydrostratigraphy of the Trinity aquifer with the addition of the cavernous HSU at the top of the upper zone of the Trinity aquifer and the Herff Falls HSU between the Bulverde and Rust HSUs of the middle zone of the Trinity aquifer. This updated report provides additional information about a complex aquifer system. The complexity in the aquifer system results from a combination of the original depositional history, bioturbation, development of primary and secondary porosity, postdepositional diagenesis, fracturing, and faulting.
Texas↗
Exploring the dynamic interactions between the Southern San Andreas Fault and a normal fault under the Salton Sea
We investigate the dynamic interactions between the Southern San Andreas Fault (SSAF) and a proximal normal fault (NF) beneath the Salton Sea in southern California. The NF, positioned near the SSAF terminus at Bombay Beach, exhibits 11–15 displacement events across 14 stratigraphic sequences, with a range of 0.2–1.4 m of vertical offset since ∼2–3 ka. Notably, four of these events may align temporally with SSAF earthquakes, raising questions about the possible interplay between the two faults. Utilizing dynamic rupture models, we analyze the coseismic interactions between the SSAF and NF, addressing under what conditions the SSAF induces slip on the NF. Our findings reveal that a suite of SSAF ruptures, particularly those propagating from north to south, can trigger slip on the normal fault and replicate observed vertical offsets. If the SSAF extends beneath the Salton Sea, earthquakes originating south of the NF intersection are less likely to trigger normal fault slip, although we cannot exclude this possibility. Some SSAF ruptures do not trigger discernible slip on the NF, rendering such events undetectable in the stratigraphic record. Our research contributes toward discussions regarding the seismic hazard in southern California, shedding light on the interplay between the SSAF and NF.
California↗
3-D mapping of the conterminous U.S. within the USGS US GeoFramework Initiative: A status report
No abstract available.
Conterminous United States↗
Water-quality characteristics of the Red River of the North and tributaries in the Fargo-Moorhead metropolitan area, North Dakota, 2019–22
The Flood Risk Management Project was initiated in 2008 in the Fargo-Moorhead metropolitan area to reduce flood risk, flood damages, and flood protection costs in the Fargo-Moorhead metropolitan area. In cooperation with the U.S. Army Corps of Engineers, the U.S. Geological Survey initiated a water-quality monitoring study to describe the water-quality characteristics of the Red River of the North and its tributaries in the Fargo-Moorhead metropolitan area during the preconstruction period of the Flood Risk Management Project from October 1, 2019, to October 1, 2022. The monitoring study included the collection of discrete and continuous water-quality data and streamflow monitoring at selected sites that integrated and enhanced existing monitoring programs within the study area. Discrete samples collected at 10 sites in the Fargo-Moorhead metropolitan area were analyzed for major ions, trace elements, nutrients, suspended sediment, pesticides, and fecal indicator bacteria. In general, major ion concentrations were higher at sites on the tributaries (Wild Rice, Sheyenne, and Maple Rivers) compared to sites on the Red River of the North. In general, bicarbonate, calcium, magnesium, and sulfate represented most of the dissolved ions measured in samples collected at the 10 sites. Calcium, chloride, fluoride, potassium, silica, and sodium were also measured in samples, but they represented a smaller portion of the total dissolved ions. Sulfate was the most dominant dissolved ion that had the highest concentrations among the major ions measured in samples. A total of 18 trace elements were analyzed in discrete samples. Several of the trace elements had concentrations below the laboratory reporting level in all of the samples, including antimony, beryllium, cadmium, chromium, silver, and thallium. Sites on the Wild Rice River generally had the highest concentrations of arsenic, barium, boron, manganese, and nickel compared to the other sites. Nutrients analyzed in discrete samples included filtered and unfiltered concentrations of ammonia, nitrate plus nitrite, phosphorus, and organic carbon. The median filtered ammonia concentration at most sites was less than the laboratory reporting level of 0.03 milligram per liter as nitrogen except for the Sheyenne River at Harwood, North Dakota (U.S. Geological Survey [USGS] station 05060400), and Red River of the North near Georgetown, Minnesota (USGS station 05062130). The lowest median unfiltered nitrate plus nitrite concentration was measured at sites on the Red River of the North upstream from the Fargo-Moorhead metropolitan area and the highest median was at sites on the Red River of the North downstream from the Fargo-Moorhead metropolitan area compared to all other sites. The increase in nitrate plus nitrite concentrations could reflect the effect of the wastewater-treatment plant discharge that enters the Red River of the North upstream from the site located downstream from the Fargo-Moorhead metropolitan area and from urban runoff. Phosphorus (unfiltered) concentrations were generally higher at sites on the Maple and Sheyenne Rivers compared to the other sites and were higher at sites on the Red River of the North downstream from the Fargo-Moorhead metropolitan area compared to sites upstream on the Red River of the North. Suspended-sediment concentrations were generally highest at sites in the Sheyenne River and lowest in the upstream Red River of the North sites. Suspended-sediment concentration was highly variable in samples collected at the 10 sites, mostly influenced by the occurrence of snowmelt and rainfall-runoff events. The Sheyenne River near Kindred, N. Dak. (USGS station 05059000) had the largest range in sediment concentrations in samples collected at the 10 sites. For all sites other than the Sheyenne River near Kindred, N. Dak., 95 percent or more of the suspended sediment had particle diameter sizes less than 0.0625 millimeter in 50 percent of the samples (median). Of the 102 pesticides and pesticide degradates analyzed, 45 constituents had no detectable concentrations in any of the 17 samples collected at five sites. The remaining 57 pesticides had at least one detection in the samples collected at the five sites. The sites on the Wild Rice River (near Abercrombie, N. Dak., USGS station 05053000, and near St. Benedict, N. Dak., USGS station 05053500) and Sheyenne River near Kindred, N. Dak., had fewer pesticide detections compared to the Maple River below Mapleton, N.Dak. (USGS station 05060100) and the Red River of the North at Fargo, N. Dak (USGS station 05054000) and near Georgetown, Minn. Patterns in annual loads generally followed the same pattern as streamflow at the 10 sites for water years 2020–22. A water year is the 12-month period from October 1 to September 30 and is designated by the calendar year in which it ends. The greatest loads for all constituents were delivered at the two downstream sites on the Red River of the North; sites that also had the highest annual streamflows among the sites and the greatest loads were delivered in water year 2020 when the highest streamflows occurred at the sites. Likewise, the least loads for most constituents were at the Maple River and were least in 2021 compared to the other years because of low-streamflow conditions. Water-quality measurements continuously recorded at the Red River of the North at Hickson, N. Dak. (USGS station 05051522); Red River of the North at Fargo, N. Dak.; and Red River of the North near Georgetown, Minn. included water temperature, specific conductance, dissolved oxygen, pH, and turbidity. Specific conductance values were similar for the Red River of the North near Hickson, N. Dak., and Red River of the North at Fargo, N. Dak., when compared to the Red River of the North near Georgetown, Minn. that had higher values than the other two sites. Dissolved oxygen concentrations and pH were similar among the three sites on the Red River. The patterns in turbidity were mostly related to streamflow conditions and were similar among the three sites on the Red River of the North.
Minnesota, North Dakota↗
Extending the Boore and Abrahamson (2023) modified square-root-impedance method for the development of site amplifications consistent with the full-resonance approach to a range of VS30 values
The square-root-impedance (SRI) method is commonly used to approximate the seismic site amplifications computed using the full-resonance (FR) method for gradient shear-wave velocity ( V S ) profiles that are smoothly varying with depth. The SRI site amplifications have been observed to systematically underpredict the FR site amplifications by a ratio of FR/SRI amplifications around 1.05 to 1.3 across a wide frequency range (Boore, 2013). Recently, Boore and Abrahamson (2023; hereafter, BA23) related this difference in the SRI and FR methods to differences in the exponent η of the ratio of seismic impedances between the two methods. They proposed the implementation of a modified frequency-dependent η in the SRI method to improve its match to the FR site amplifications. This modified η was derived using only five V S profiles. We investigate the performance of the BA23 η for a wide range of realistic gradient V S profiles with V S30 ranging from 180 to 1500 m/s. These gradient V S profiles are constructed using two power-law functions of depth and are constrained by the assigned VS30 value, the depth and velocity of the half-space, and depths to shear-wave velocity horizons of 1.0 and 2.5 km/s ( Z 1.0 and Z 2.5 ) based on western United States sites. Despite observing a V S30 dependence of η, we find that the BA23 η generally works reasonably well for the range of V S profiles analyzed. Using the VS30 -dependent η derived in this study results in improvements in matching the FR site amplification compared to using the BA23 η. These improvements are more pronounced for the soft-site conditions and become modest to negligible for the stiff site conditions
Bulletin of the Seismological Society of America↗
Potential for leakage among principal aquifers in the Memphis area, Tennessee
The principal aquifers in the Memphis area consist primarily of sand or sand and gravel, and the confining beds consist of clay, silt, sand, and lignite. The Jackson Formation and upper part of the Claiborne Group serve as the confining bed separating the water table aquifers from the Memphis Sand; the Flour Island Formation separates the Memphis Sand from the Fort Pillow Sand. Differences in total hydraulic head among the principal aquifers in the Memphis urban area result in vertical hydraulic gradients which create a potential for inter-aquifer exchange of water. Throughout this area, the gradient is downward from the water table aquifers to the Memphis Sand. In the central part of the Memphis urban area, the vertical hydraulic gradient is upward from the Fort Pillow Sand to the Memphis Sand, and in the eastern and western parts, it is downward from the Memphis Sand to the Fort Pillow Sand. The vertical distribution of carbon-14 data for water from the fluvial deposits, Memphis Sand, and Fort Pillow Sand shows an increase in the relative age of the water with depth. The areal distribution of carbon-14 data for water from the upper part of the Memphis Sand indicates that relatively recent water has been brought into the major cone of depression in the potentiometric surface of the Memphis Sand, either by horizontal movement or from downward vertical leakage. The normal, near-surface geothermal gradient in the Memphis area was determined to be 0.6 C/100 ft. Deviations from the normal geothermal gradient, in areas affected by intense pumping from the Memphis Sand, indicate that downward vertical leakage occurs from the water table aquifers through the Jackson-upper Claiborne confining bed to the Memphis Sand. The velocity of downward vertical leakage of water from the Memphis Sand through the Flour Island confining bed to the Fort Pillow Sand was determined to be 0.0066 ft/day by analysis of borehole temperature data from an observation well in the northeastern part of the Memphis area. From this velocity and the head difference between the Memphis Sand and the Fort Pillow Sand at this locality, the hydraulic conductivity of the Flour Island confining bed was determined to be 0.00114 ft/day. (Lantz-PTT)
Tennessee↗
Mapping the resistivity structure of Walker Ridge 313 in the Gulf of Mexico using the marine CSEM method
A marine controlled source electromagnetic (CSEM) campaign was carried out in the Gulf of Mexico to further develop marine electromagnetic techniques in order to aid the detection and mapping of gas hydrate deposits. Marine CSEM methods are used to obtain an electrical resistivity structure of the subsurface which can indicate the type of substance filling the pore space, such as gas hydrates which are more resistive. Results from the Walker Ridge 313 study (WR 313) are presented in this paper and compared with the Gulf of Mexico Gas Hydrate Joint Industry Project II (JIP2) logging while drilling (LWD) results and available seismic data. The hydrate, known to exist within sheeted sand deposits, is mapped as a resistive region in the two dimensional (2D) CSEM inversion models. This is consistent with the JIP2 LWD resistivity results. CSEM inversions that use seismic horizons provide more realistic results compared to the unconstrained inversions by providing sharp boundaries and architectural control on the location of the resistive and conductive regions in the CSEM model. The seismic horizons include: 1) the base of the gas hydrate stability zone (BGHSZ), 2) the top of salt, and 3) the top and bottom of a fine grained marine mud interval with near vertical hydrate filled fractures, to constrain the CSEM inversion model. The top of salt provides improved location for brines, water saturated salt, and resistive salt. Inversions of the CSEM data map the occurrence of a ‘halo’ of conductive brines above salt. The use of the BGHSZ as a constraint on the inversion helps distinguish between free gas and gas hydrate as well as gas hydrate and water saturated sediments.
Louisiana↗
Paleoseismology of the Sawtooth fault and implications for fault behavior in the epicentral region of the 2020 Mw 6.5 Stanley, Idaho, earthquake
The 2020 moment magnitude ( M w ) 6.5 Stanley, Idaho, earthquake raised questions about the history and extent of complex faulting in the northwestern Centennial Tectonic Belt (CTB) and its relation to the Sawtooth normal fault and Eocene Trans‐Challis fault system (TCFS). To explore faulting in this area, we excavated a paleoseismic trench across the Sawtooth fault along the western margin of the CTB, and compared an early Holocene (9.1 ± 2.1 ka, 1δ ) rupture at the site with lacustrine paleoseismic data and fault mapping in the 2020 epicentral region. We find: (1) a history of partial to full rupture of the Sawtooth fault ( M w 6.8–7.4), (2) that shorter ruptures ( M w ≤ 6.9 ) are likely along distributed and discontinuous faults in the epicentral region, (3) that this complex system that hosted the 2020 earthquake is not directly linked to the Sawtooth fault, (4) that the northeast‐trending TCFS likely plays a role in controlling fault length and rupture continuity for adjacent faults, and (5) that parts of the TCFS may facilitate displacement transfer between normal faults that accommodate crustal extension and rotation. Our results help unravel complex faulting in the CTB and imply that relict structures can help inform regional seismic hazard assessments.
Idaho↗
Evidence for low effective stress within the crust of the subducted Gorda plate from the 2022 December Mw 6.4 Ferndale earthquake sequence
Stress levels on and adjacent to megathrust faults at seismogenic depths remain a key but difficult to constrain parameter for assessing seismic hazard in subduction zones. Although strong ground motions have been observed to be generated from distinct, high-stress regions on the downdip end of the megathrust rupture areas in many great earthquakes, we lack direct constraints on the stress level in the lower seismogenic portion of the Cascadia megathrust. On 2022 December 20, a M w 6.4 strike-slip earthquake occurred near Ferndale, California in southern Cascadia and likely ruptured the Gorda slab crust in the lower seismogenic portion, providing an opportunity to assess the stress level in this region. Here, we relocate the Ferndale mainshock and the first two weeks of aftershocks using a high-resolution 3-D velocity model and estimate rupture dimensions, directivity, and stress drop for several M w 4-5 aftershocks and recent earthquakes. The aftershocks define a strike-slip fault in the slab crust striking ENE, consistent with the mainshock focal mechanism. The orientation of this fault is about 45 ° off the ideally oriented fault plane given the stress state in the slab. The aftershock zone is extensive and broad in the forward direction of the mainshock rupture but still constrained within the volume of high Vp/Vs within the slab crust. Our stress drop estimates are generally lower for M w 4-5 earthquakes located within the slab crust compared to those a few km deeper in the slab mantle. Combined, our results support a relatively low effective stress level in the vicinity of the megathrust in the lower portion of the seismogenic zone in southern Cascadia, likely due to elevated fluid pressures. Consequently, the ground motion in the onshore region above this low-stress seismogenic portion in southern Cascadia may not be as intense as that observed during great earthquakes in other subduction zones.
California↗
Approximate inland extent of saltwater intrusion at the base of the Biscayne aquifer, Miami-Dade County, Florida, 2022
Miami-Dade County is part of a densely populated urban corridor in southeastern Florida. The Biscayne aquifer serves as Miami-Dade County’s primary drinking water source and is characterized by highly permeable karstic limestone and carbonate sand. The aquifer’s coastal location and permeable nature make it susceptible to saltwater intrusion. Monitoring the current inland extent and the rate of movement of the saltwater front in the aquifer can inform management strategies for conserving the long-term sustainability of the county’s water supply. In the 1950s, the U.S. Geological Survey published a map of the inland extent of saltwater intrusion in the Biscayne aquifer and has continued to update this map to monitor changes over time, with the most recent update published in 2018. An updated map has been created showing the approximate inland extent of saltwater intrusion in the Biscayne aquifer in eastern Miami-Dade County in 2022, with the 2018 extent shown for comparison. The inland extent of saltwater intrusion was mapped through the interpretation of borehole electromagnetic induction logs and measurements of chloride and specific conductance in groundwater samples. The location of the saltwater interface at the base of the Biscayne aquifer was represented by the 1,000-milligram-per-liter isochlor. This report describes changes in the location of the saltwater interface from 2018 to 2022. By 2022, the saltwater interface had moved farther inland in both the northern and southern parts of the county, advancing by as much as 0.3 kilometer in the north and up to 0.8 kilometer in the Model Land Area to the south. However, it remained relatively unchanged from its 2018 position in the east-central part of the county.
Florida↗
Geospatial PDF map of the compilation of GIS data for the mineral industries of select countries in the Indo-Pacific region
Introduction In 2024, the U.S. Geological Survey's (USGS) National Minerals Information Center (NMIC) completed the project titled "Compilation of geospatial data for the mineral industries of select countries in the Indo-Pacific." This project aimed to leverage the expertise and capabilities of the NMIC to collect, synthesize, and interpret geospatial data to inform on the extractive resources of select countries in the Indo-Pacific region (area of study) and expand the NMIC's understanding on the impact of mineral industry of these countries in the global economy. The 19 countries of interest in the Indo-Pacific study area include Bangladesh, Bhutan, Brunei, Burma, Fiji, Malaysia, Mongolia, Nauru, New Caledonia, New Zealand, Papua New Guinea, Philippines, Singapore, Solomon Islands, South Korea (Republic of Korea), Sri Lanka, Taiwan, Timor-Leste, and Vietnam. The primary objective of this effort was to create a fully attributed Geographic Information System (GIS) portraying existing mining infrastructure, resources, and production capacities across the Indo-Pacific study area as well as highlight mineral production and processing sites under development and potential areas of future extractive industry operations and development in the region. The compiled GIS geodatabase with supporting documentation including comprehensive metadata was published as a USGS data release titled "Compilation of Geospatial Data (GIS) for the Mineral Industries of Select Countries in the Indo-Pacific." This georeferenced portable document format (GeoPDF) map sheet presents a new geographic information product containing a partial representation of the GIS data. This GeoPDF map provides a visual comparison of the distribution of mineral industry GIS data, which contributes to a deeper understanding of the intersections and complexities of the extractive industries within the select countries in the Indo-Pacific region.
Open-File Report↗
Abandonment of the Upper Devonian Greenland Gap Group and Scherr Formation and revision of the Upper Devonian Brallier and Foreknobs Formations in the central Valley and Ridge Province
This study revises the lithostratigraphic framework of the Upper Devonian interval traditionally assigned to the Greenland Gap Group across the central Appalachian Valley and Ridge Province. The work aims to modernize and standardize lithostratigraphic nomenclature, establish a new reference section and demonstrate how the revised stratigraphy improves edge-matching of 1:24,000 scale geologic maps and supports compilation mapping at scales of 1:100,000 and larger. The revision eliminates the names Greenland Gap Group, Scherr Formation and the Minnehaha Springs Member of the Scherr Formation; reassigns all strata previously designated as Scherr Formation by Dennison (1970) to the upper Brallier Formation; and abandons the basal Mallow Member of the Foreknobs Formation, placing its strata within the upper Brallier as originally defined by Butts (1918). The contact between the Brallier and Foreknobs formations is placed at the base of the first mappable, ridge-forming package of fine- to coarse-grained, cross-bedded, sandstone beds, often containing rounded quartz pebbles with minor interbeds of shale and siltstone. This contact may be gradational in places but, even in absence of good exposure, can usually be distinguished topographically in recently produced lidar-derived imagery as having elevated relief due to the presence of more resistant, compositionally mature coarse-grained sandstone-rich strata. Applying this criterion for mapping the contact between the Brallier and Foreknobs formations has resulted in reconciliation of mismatches of geologic contacts along several 7.5-minute quadrangle boundaries in the states of Virginia, West Virginia, Maryland and Pennsylvania. A new reference section at Baker, West Virginia showcases the contacts between the Harrell Shale, Brallier Formation, Foreknobs Formation and Hampshire Formation. A digital outcrop model of the reference section is provided for future preservation.
Maryland, Pennsylvania, Virginia, West Virginia↗