Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Techniques and Methods”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9Linked to original sources
USGS2025

Peak streamflow trends in North Dakota and their relation to changes in climate, water years 1921–2020

Standardized guidelines for completing flood-flow frequency analyses are presented in a U.S. Geological Survey Techniques and Methods report known as Bulletin 17C, https://doi.org/10.3133/tm4B5 . In recent decades (since about 2000), a better understanding of long-term climatic persistence (periods of clustered floods or droughts, or wet or dry periods) and concerns about potential climate change and land-use change have caused a reexamination of the stationarity assumptions underlying methods in Bulletin 17C. Bulletin 17C does not offer guidance on incorporating nonstationarities and further identifies a need for flood-frequency studies that incorporate changing climate or basin characteristics. As part of that reexamination, a study of annual peak streamflow (peak flow) has begun in the Midwest. This chapter of the study summarizes how hydroclimatic variability affects peak flows in North Dakota. In this analysis of peak flow, daily streamflow, and climate metrics, four periods were selected: (1) a 100-year period, 1921–2020; (2) a 75-year period, 1946–2020; (3) a 50-year period, 1971–2020; and (4) a 30-year period, 1991–2020. Output from a monthly water-balance model was used for the climate data. Statistical analysis of peak flow consisted of evaluations of autocorrelation, trends, and change points and was augmented with analyses of seasonality and daily streamflow. The long-term pattern of decreasing peak flow in the west and increasing peak flow in the east is a pattern of opposing signals on either side of the 100th meridian. Analyses indicate that a key factor in changing hydroclimatology is the increase in fall precipitation. The trends in soil moisture closely match the trends in annual precipitation. Nonstationary flood-frequency analysis necessitates detailed exploratory data analysis and additional data and information about climate, land use, and other factors. This study provides extensive exploratory analysis for peak flow, daily streamflow, and climate data for North Dakota, setting the stage for informed nonstationary flood-frequency analysis.

North Dakota↗
USGS2024

Peak streamflow trends in South Dakota and their relation to changes in climate, water years 1921–2020

Peak-flow (flood) frequency analysis is essential to water-resources management applications, including the design of critical infrastructure such as bridges and culverts, and floodplain mapping. Federal guidelines for performing peak-flow flood frequency analyses are presented in a U.S. Geological Survey Techniques and Methods Report known as Bulletin 17C. A basic assumption within Bulletin 17C, which documents the guidelines for determining annual peak streamflow frequency, is that, for basins without major hydrologic alterations (for example, regulation, diversion, and urbanization), statistical properties of the distribution of annual peak streamflows are stationary; that is, the mean, variance, and skew are constant through time. Nonstationarity is a statistical property of a peak-flow series such that the long-term (on the order of decades) distributional properties change one or more times either gradually or abruptly through time. Individual nonstationarities may be attributed to one source such as flow regulation, land-use change, or climate but are often the result of a combination of sources, making detection and attribution of nonstationarities challenging. In response to a growing concern regarding nonstationarity in peak streamflows in the region, the U.S. Geological Survey, in cooperation with the Departments of Transportation of Illinois, Iowa, Michigan, Minnesota, Missouri, South Dakota, and Wisconsin; the Montana Department of Natural Resources and Conservation; and the North Dakota Department of Water Resources, assessed the potential nonstationarity in peak streamflows in the north-central United States. This chapter characterizes the effects of natural hydroclimatic shifts and potential climate change on annual peak streamflows in the State of South Dakota. Annual peak and daily streamflow as well as model-simulated gridded climatic data were examined for temporal monotonic trends, change points, and other statistical properties indicative of changing climatic and environmental conditions. Changes in annual peak and daily flows were evaluated among 13, 35, and 81 qualifying U.S. Geological Survey streamgages for the 75-, 50-, and 30-year trend periods through water year 2020 (the period from October 1, 2019, to September 30, 2020) in South Dakota, respectively. No qualifying streamgages were in the 100-year trend period in the State. Statistical tests for autocorrelation (independent and identically distributed assumption), monotonic trends, and change points in the median and scale are analyzed to evaluate potential stationarity violations (nonstationarity) for performing at-site peak-flow flood-frequency analysis. The trends are reported using a likelihood approach as an alternative to simply reporting significant trends with an arbitrary p -value cutoff point. A distinct east-west spatial pattern of likely upward and downward monotonic trends and change points, respectively, was detected in 75- and 50-year trend periods, but an inconsistent spatial pattern was detected in the 30-year trend period. Additionally, change points in the median annual peak streamflows were detected in the late 1970s and early 1980s in the western part of the State, but in the east, the change point was more commonly detected in 1992–93. A similar east-west spatial pattern of likely upward and downward trends was detected in the annual peak-flow timing, the day of the year of the annal peak streamflow. In the western part of the State, the annual peak streamflows are arriving earlier, but in the east, the annual peak streamflows are arriving later. A peaks-over-threshold (POT) analysis where, on average, there are two events per year (POT2) and four events per year (POT4) was also used to evaluate changes in the frequency (count) of daily streamflows exceeding the threshold. Similar to detected changes in the annual peak streamflow, an east-west likely upward or downward change corresponding to an increase or decrease, respectively, in the frequency of daily streamflow greater than a POT2 and POT4 threshold was detected. A monthly water-balance model was used to evaluate hydroclimatic variation in annual and seasonal precipitation, snowfall, potential evapotranspiration, and soil moisture storage for all qualifying streamgages in the 75-, 50-, and 30-year trend periods. Detected trends in the annual hydroclimatic metrics for the 75- and 50-year trend periods indicate a spatially consistent statewide increase in precipitation, decrease in snowfall, increase in potential evapotranspiration, and increase in soil moisture storage. Furthermore, detected trends in seasonal precipitation in the 75- and 50-year trend periods highlight a pronounced change in precipitation in winter and later into the summer season, especially in the 50-year trend period in the eastern part of the State. Statewide increases in seasonal soil moisture storage were also detected, highlighting year-round increasing flood magnitudes, particularly in the eastern part of the State. Based on the results of these stationarity tests for the qualifying streamgages in South Dakota among the 75-, 50-, and 30-year trend periods, consistent temporal and spatial patterns of nonstationarity were detected among the 75- and 50-year trend periods. Furthermore, when nonstationarity is detected in daily streamflow, increased streamflow and volume (increasing frequency in POT), as well as potentially bridge scour, may have implications on culvert and highway design in the eastern part of South Dakota. Thus, when performing at-site peak-flow flood-frequency analyses in South Dakota, potential nonstationarities and alternative approaches are important considerations.

South Dakota↗
USGS2023

Groundwater-flow model of the Treasure Valley, southwestern Idaho, 1986–2015

Most of the population of the Treasure Valley and the surrounding area of southwestern Idaho and easternmost Oregon depends on groundwater for domestic supply, either from domestic or municipal-supply wells. Current and projected rapid population growth in the area has caused concern about the long-term sustainability of the groundwater resource. In 2016, the U.S. Geological Survey, in cooperation with the Idaho Water Resource Board and the Idaho Department of Water Resources, began a project to construct a numerical groundwater-flow model of the westernmost portion of the western Snake River Plain aquifer system, called the Treasure Valley. The development of the model was guided by several objectives, including: to improve the understanding of groundwater and surface water interactions; to facilitate conjunctive water management; to provide a tool for water resources planning; and to provide a tool for water allocation. The model was constructed with a spatial scale and level of detail that aimed to meet these objectives while balancing the sometimes-competing goals of fast runtimes, numerical stability, usability, and parsimony. The Treasure Valley Groundwater Flow Model (TVGWFM) is a three-dimensional finite-difference numerical model constructed using MODFLOW 6 (Langevin and others, 2017, Documentation for the MODFLOW 6 Groundwater Flow Model: U.S. Geological Survey Techniques and Methods, book 6, chap. A55, 197 p., https://doi.org/10.3133/tm6A55 ). The model covers the westernmost portion of the western Snake River Plain and is discretized into a regular grid of 64 by 65 cells with a side length of 1 mile and 6 layers of varying depth and active area. A historical model period was developed consisting of 360 month-long stress periods for 1986–2015. The model builds upon previous modeling efforts by adding a transient period, incorporating new head and discharge observations to constrain parameters, incorporating information from the hydrogeologic framework model (HFM) of Bartolino (2019, Hydrogeologic framework of the Treasure Valley and surrounding area, Idaho and Oregon: U.S. Geological Survey Scientific Investigations Report 2019–5138, https://doi.org/10.3133/sir20195138 ) and incorporating refined estimates of evapotranspiration and irrigation classification of lands in the study area. The TVGWFM includes all significant components of recharge to and discharge from the aquifer. Inflows include canal seepage, irrigation and precipitation recharge, mountain-front recharge, rivers and stream seepage, and seepage from Lake Lowell. Outflows include discharge to agricultural drainage ditches, discharge to rivers and streams, pumping, and discharge to Lake Lowell. Each recharge or discharge component is represented separately using individual MODFLOW 6 packages. Parameter values were derived with a combination of trial-and-error steps and automated parameter estimation using PEST software (Doherty, J.E., 2005, PEST, model-independent parameter estimation–User manual: Watermark Numerical Computing, https://pesthomepage.org/documentation ). Parameter estimates were constrained with several types of observation data, including water levels, water level changes, vertical water level differences, drain discharges, change in drain discharges, river seepage, seepage from Lake Lowell, and change in seepage from Lake Lowell. Material properties from the hydrogeologic framework were also used to assign the minimum and maximum values of some parameters. A final parameter realization was reached that minimized residuals between the observed and modelled values for the various observation groups. Mean residuals for the observation groups were 15.4 feet (ft) for water levels, 0.2 ft for water level changes, 19.4 ft for vertical water level differences, −3.9 cubic feet per second (ft 3 /s) for drain discharges, 0.0 ft 3 /s for changes in drain discharge, 45.0 ft 3 /s for river seepage, −40.1 ft 3 /s for Lake Lowell seepage, and 126.3 ft 3 /s for changes in Lake Lowell seepage. The quality of the model’s fit to observations varied spatially, with notable areas of under- or over-simulation of water levels present to the northwest and southwest of Lake Lowell, in the foothills along the eastern model boundary, and near the City of Eagle. Trends were observed in the residuals of many of the observation groups, indicating that the model is missing or not fully reproducing some phenomena that are observed in the system. The TVGWFM can be used as a tool for water resource planning, for understanding the interactions of groundwater and surface water at a basin scale, and for facilitating conjunctive management, but may lack the precision needed for water rights administration at a local scale. Additional sources of uncertainty or limitations of the model are noted. The quantity and spatial distribution of canal seepage and infiltration of irrigation water recharge, the largest sources of recharge to the system, are unknown and approximated indirectly. There is poor understanding of how canal seepage and incidental recharge change as land is converted from agricultural (irrigated) to suburban (semi-irrigated). These uncertainties will affect any scenarios that investigate changes to land use or irrigation practices. Finally, the model has relatively high water-level residuals around and to the southwest of Lake Lowell and should not be used to estimate water level effects in that region. The model was built with multiple, broadly expressed objectives and did not optimize performance for specific uses. However, the model and the tools included in an associated data release provide ample flexibility to improve the model for future uses. Adjustments and improvements could be made by refining the model in an area of interest, collecting additional calibration data, applying more rigorous boundary conditions, or re-estimating model parameters to optimize model performance for a specific model forecast.

Idaho↗
USGS2024

Monitoring marine eruptions

Introduction Submarine volcanoes produce much of the same seismicity and eruptive activity as subaerial volcanoes and can pose hazards to society. Although they can be monitored with similar techniques and methods as described in other chapters of this volume, their submerged location brings unique challenges. This chapter addresses these challenges and provides recommendations for monitoring volcanoes fully or partly in marine environments to meet the capabilities described in other chapters of this volume. The United States and its territories host dozens of submarine volcanoes with most (around 60) in the Commonwealth of the Northern Mariana Islands. Approximately 20 of the Northern Mariana Islands submarine volcanoes are known to be hydrothermally active, and 10 have confirmed eruptions since the 1950s (for example, Baker and others, 2008; Tepp and others, 2019a). Nine of those volcanoes were considered by the National Volcanic Threat Assessment (Ewert and others, 2018) to have a combination of eruptive type and summit depth that poses a higher risk of hazardous eruptions, although only one was listed as a moderate (level 3) threat. Other notable submarine volcanoes of interest to the United States that have historically erupted are Axial Seamount off the Washington State coast, Kamaʻehuakanaloa in Hawaiʻi, and Vailuluʻu seamount in American Samoa. All of these, however, have a low risk of hazards because of their depth (greater than 600 meters below sea level) and eruptive type and so are not included in the National Volcanic Threat Assessment. In addition to submarine volcanoes, the submerged flanks of island volcanoes can also be a source of hazardous submarine eruptions—for example, the 1877 eruption of Mauna Loa, Hawai‘i, in Kealakekua Bay (Wanless and others, 2006). The most notable submarine eruption in recent times was the 2022 eruption of Hunga Tonga–Hunga Haʻapai in Tonga, which was one of the largest eruptions on Earth in the past 100 years. It created a massive volcanic plume, unprecedented shock waves, and far-reaching tsunami (Lynett and others, 2022). Other recent submarine eruptions in the Pacific Ocean Basin have produced subaerial plumes that reached aircraft heights (Carey and others, 2014) and large pumice rafts that can affect marine traffic and harbors (for example, Jutzeler and others, 2014; Kornei, 2019). These examples illustrate the potential hazards of major submarine eruptions. Yet, submarine volcanoes are largely unmonitored, and many eruptions occur that are unnoticed or only identified hours or days afterward. Within U.S. territory, submarine volcanoes in the Northern Mariana Islands have been known to produce eruptive activity that can affect society. Reports from fishermen and other marine vessels in the Northern Mariana Islands have noted underwater explosions, sea-surface discoloration, and bubbling water, all of which are known to be signs of submarine volcanic activity. South Sarigan seamount, located about 160 kilometers (km) north of Saipan, erupted in 2010 from greater than 150 meters below the sea surface, resulting in a gas and ash plume that reached more than 11.9 km into the atmosphere (for example, Searcy, 2013; Embley and others, 2014), high enough to affect international air traffic. Precursory and co-eruptive seismicity was detected on the regional Northern Mariana Islands seismic network (Searcy, 2013) and on global monitoring instruments (Green and others, 2013). Monitoring of submarine volcanoes is best accomplished with marine-based instrumentation, which is also useful for monitoring small island volcanoes that may not have the land area necessary for comprehensive subaerial monitoring. The primary marine-based instrumentation used for submarine volcanoes includes ocean-bottom pressure sensors to assess sea-floor deformation, ocean-bottom seismometers (OBSs) to detect seismicity, and both moored and ocean-bottom hydrophones to detect submarine explosions. Other sensors offer important monitoring data, such as turbidity, temperature, and chemistry of hydrothermal emissions. Marine-based instruments are typically deployed in campaign-style networks with no real-time telemetry owing to cost considerations and technical limitations. However, when necessary, marine instruments can be operated in real time using cables to transmit data to land-based facilities; other technologies for this purpose are in use or in development, such as acoustic transmission from the instrument to a moored buoy (Matsumoto and others, 2016) and a winch-based system with a satellite antenna that is part of the instrument mooring (Matsumoto and others, 2019). Emerging technologies for marine-based monitoring may be considered as part of a future monitoring plan. These technologies include ocean gliders and floats with on-board hydrophones that have been used to record earthquakes and submarine eruptions (for example, Matsumoto and others, 2013; Sukhovich and others, 2015) and fiber-optic cables that have been used as strainmeters to detect earthquakes (for example, Marra and others, 2018; Lindsey and others, 2019). Land-based instruments and satellites can also provide some capability for monitoring submarine volcanoes, but they provide more limited observations than marine-based instrumentation.

Scientific Investigations Report↗
USGS1980

Chemical and physical characteristics of precipitation at selected sites in Florida

Infrequent sampling of precipitation in Florida has been conducted by the U.S. Geological Survey since 1965. A summary of the historical data from 24 sites throughout Florida indicate that the principal ionic composition of atmospheric precipitation samples is calcium-sodium and bicarbonate-chloride with an average specific conductance of 32 micromhos per centimeter at 25 C. Historically, much of the sampling focused on primary nutrients and selected trace elements. Historical data indicate that nitrogen and phosphorus concentrations averaged 1.1 and 0.1 milligrams per liter, respectively. The limited trace metal data indicate that motor-vehicle activity may have a significant impact on local precipitation quality. Lead, for example, was measured in concentrations of as much as 2,400 micrograms per liter in samples collected in a highly populated, commerical area in south Florida. Statistical testing indicated that most major inorganic constituents, primary nutrients, and trace metals were significantly differnet among the sampling sites. The pH data indicated a range of about 5.0 to 7.0, but only limited pH data were collected and analyzed at the historical sites in such a timely manner as to represent pH conditions of the atmospheric precipitation during active rainfall. A critical review of the historical data suggested that while they may reflect local atmospheric quality conditions they likely do not define baseline conditions from a regional perspective. The application of these data were generally limited regarding regional extrapolation due to lack of standardization of sampling techniques, variable methods of sample preservation, nonuniform sampling intervals, variable sample sizes, and different periods of record. (USGS)

Water-Resources Investigations Report↗
USGS1986

U.S. Geological Survey research in radioactive waste disposal - Fiscal years 1983, 1984, and 1985

The report summarizes progress on geologic and hydrologic research related to the disposal of radioactive wastes. The research is described according to whether it is related most directly to: (1) high-level and transuranic wastes, (2) low-level wastes, or (3) uranium mill tailings. Included is research applicable to the identification and geohydrologic characterization of waste-disposal sites, to investigations of specific sites where wastes have been stored, and to studies of regions or environments where waste-disposal sites might be located. A significant part of the activity is concerned with techniques and methods for characterizing disposal sites and studies of geologic and hydrologic processes related to the transport and (or) retention of waste radionuclides.

Water-Resources Investigations Report↗
USGS1991

U.S. Geological Survey research in radioactive waste disposal - Fiscal years 1986-1990

The report summarizes progress on geologic and hydrologic research related to the disposal of radioactive wastes. The research efforts are categorized according to whether they are related most directly to: (1) high-level wastes, (2) transuranic wastes, (3) low-level and mixed low-level and hazardous wastes, or (4) uranium mill tailings. Included is research applicable to the identification and geohydrologic characterization of waste-disposal sites, to investigations of specific sites where wastes have been stored, to development of techniques and methods for characterizing disposal sites, and to studies of geologic and hydrologic processes related to the transport and/or retention of waste radionuclides.

Water-Resources Investigations Report↗
USGS1995

Synthesis of natural flows at selected sites in and near the Milk River basin, Montana, 1928-89

Natural monthly streamflows were synthesized for the years 1928-89 at 2 sites in the St. Mary River Basin and 11 sites in the Milk River Basin in north- central Montana. The sites are represented as nodes in a streamflow accounting model being developed by the Bureau of Reclamation for the Milk River Basin. Recorded flows at most sites have been affected by human activities, including reservoir storage and irrigation diversions. The flows at the model nodes were corrected for the effects of these activities to obtain synthesized flows. The synthesized flows at nodes with seasonal and short-term records were extended using a statistical technique. The methods of synthesis varied, depending on upstream activities and information available. Flows at sites in the St. Mary River Basin and at the Milk River at Eastern Crossing of International Boundary pre- viously had been synthesized. The flows at mainstem sites downstream from the Milk River at Eastern Crossing were synthesized by adding synthesized natural runoff from intervening drainage areas to natural flows for Milk River at Eastern Crossing. Natural runoff from intervening drainage areas was estimated by multiplying recorded flows at selected index gaging stations on tributary streams by the ratio of the intervening drainage area to the combined drainage area of the index stations. The recorded flows for Milk River at Western Crossing of International Boundary and for Peoples Creek near Dodson, Montana, were assumed to be natural flows. The synthesized annual flows at the mouth of the Milk River compared favorably with the recorded flows near the mouth when the effects of upstream irrigation were considered.

Water-Resources Investigations Report↗
USGS1990

Field manual for the investigation of fish kills

Preface Fish kills are graphic evidence of serious problems in a lake or stream. If the kill is related to the presence of toxic chemicals, there may be human health concerns, in addition to the obvious damage to the ecosystem and the fisheries resources. Depending on the cause of a fish kill, legal and economic ramifications may be involved. If the kill is cause by human or corporate actions, litigation is likely to follow, with possible court-awarded damages and assessed costs for cleanup and restoration. Federal and State agencies have expressed the need for a compendium of known and accepted methods and techniques that should be followed by anyone investigation a fish kill. This manual is an attempt to fill that need. It addresses the many facets involved in a fish kill investigation and provides instruction, guidance, examples, and sample forms that can be used. The U.S. Fish and Wildlife Service is pleased to provide this manual to help fisheries biologists and others prepare for a fish kill investigation. Research and Development (Region 8) has cooperated with the Division of Environmental Contaminants in Fish and Wildlife Enhancement to provide expertise and funds. We hope that the manual proves to be useful for interpreting evidence at the site of a fish kill, and corrective actions, and preparing for appearance as a court witness.

Resource Publication↗
USGS2011

Hyperspectral remote sensing of vegetation and agricultural crops: Knowledge gain and knowledge gap after 40 years of research

The focus of this chapter was to summarize the advances made over last 40+ years, as reported in various chapters of this book, in understanding, modeling, and mapping terrestrial vegetation using hyperspectral remote sensing (or imaging spectroscopy) using sensors that are ground-based, truck-mounted, airborne, and spaceborne. As we have seen in various chapters of this book and synthesized in this chapter, the advances made include: (a) significantly improved characterization and modeling of a wide array of biophysical and biochemical properties of vegetation, (b) ability to discriminate plant species and vegetation types with high degree of accuracies (c) reducing uncertainties in determining net primary productivity or carbon assessments from terrestrial vegetation, (d) improved crop productivity and water productivity models, (b), (e) ability to access stress resulting from causes such as management practices, pests and disease, water deficit or excess; , and (f) establishing more sensitive wavebands and indices to detect plant water\moisture content. The advent of spaceborne hyperspectral sensors (e.g., NASA’s Hyperion, ESA’s PROBA, and upcoming NASA’s HyspIRI) and numerous methods and techniques espoused in this book to overcome Hughes phenomenon or data redundancy when handling large volumes of hyperspectral data have generated tremendous interest in advancing our hyperspectral applications knowledge base over larger spatial extent such as region, nation, continent, and globe.

Book chapter↗
USGS2016

Ashy Storm-Petrel Oceanodroma homochroa mist-netting and capture rates in the California Channel Islands, 2004–2007

The California Channel Islands (CCI) provide essential nesting habitat for a significant portion of the world’s Ashy Storm-Petrel Oceanodroma homochroa (ASSP) breeding population, but true abundance at this locality is not well known. Land-based nocturnal mistnetting has been conducted sporadically in the CCI since 1976, with variation in techniques and methods. Using a standardized catch-perunit-effort (CPUE) is one of the few methods available to monitor trends in relative abundance, but there currently are no guidelines for a standardized, repeatable approach for the CCI. During 2004–2007, I conducted mist-netting for ASSP at three colony sites within the CCI: Scorpion Rock (SR), Santa Barbara Island (SBI), and Prince Island (PI). During 47 site-nights (22 sessions), I obtained 1 177 unique captures, including 34 recaptures (2.9%) of previously banded individuals. ASSP captured at all three islands showed peak proportions of fully developed incubation patches in July and August. ASSP captured in the CCI had 5%–9% lower body mass than individuals captured off central California during the early 1970s; it is not known whether this difference reflects natural inter-annual variation or differences in body condition. ASSP from SBI had the lowest body condition index (BCI) compared with those from PI and SR, indicating different foraging environments. Overall, 22 netting-sessions at three islands yielded a power of 84% to detect a 30% lesser CPUE; 19 sessions would be required in a future effort to evaluate this level of change. Evaluation of additional factors that affect CPUE and other independent measures of abundance or attendance should be included in future mist-netting efforts.

California↗
USGS2016

National protocol framework for the inventory and monitoring of bees

This national protocol framework is a standardized tool for the inventory and monitoring of the approximately 4,200 species of native and non-native bee species that may be found within the National Wildlife Refuge System (NWRS) administered by the U.S. Fish and Wildlife Service (USFWS). However, this protocol framework may also be used by other organizations and individuals to monitor bees in any given habitat or location. Our goal is to provide USFWS stations within the NWRS (NWRS stations are land units managed by the USFWS such as national wildlife refuges, national fish hatcheries, wetland management districts, conservation areas, leased lands, etc.) with techniques for developing an initial baseline inventory of what bee species are present on their lands and to provide an inexpensive, simple technique for monitoring bees continuously and for monitoring and evaluating long-term population trends and management impacts. The latter long-term monitoring technique requires a minimal time burden for the individual station, yet can provide a good statistical sample of changing populations that can be investigated at the station, regional, and national levels within the USFWS’ jurisdiction, and compared to other sites within the United States and Canada. This protocol framework was developed in cooperation with the United States Geological Survey (USGS), the USFWS, and a worldwide network of bee researchers who have investigated the techniques and methods for capturing bees and tracking population changes. The protocol framework evolved from field and lab-based investigations at the USGS Bee Inventory and Monitoring Laboratory at the Patuxent Wildlife Research Center in Beltsville, Maryland starting in 2002 and was refined by a large number of USFWS, academic, and state groups. It includes a Protocol Introduction and a set of 8 Standard Operating Procedures or SOPs and adheres to national standards of protocol content and organization. The Protocol Narrative describes the history and need for the protocol framework and summarizes the basic elements of objectives, sampling design, field methods, training, data management, analysis, and reporting. The SOPs provide more detail and specific instructions for implementing the protocol framework. A central database, for managing all the resulting data is under development. We welcome use of this protocol framework by our partners, as appropriate for their bee inventory and monitoring objectives.

Report↗
USGS2006

Radio telemetry for black-footed ferret research and monitoring

By 1973, radio telemetry was regarded as an important potential tool for studying the elusive, nocturnal, and semifossorial black-footed ferret (Mustela nigripes), but fears of using invasive techniques on this highly endangered mammal caused delays. We began radio collaring ferrets in 1981. Use of radio telemetry on ferrets proved to be both challenging and rewarding. We document two decades of development and use that led to the present radio-tagging techniques and methods for radio tracking. The 7-g radio collar commonly used after 1992 was smaller and lighter, relative to mass and size of subjects, than collars used in studies of other Mustela. Other important developments were a Teflon® coating to shed mud, a highly flexible stainless steel cable for whip antennas, and a nondurable wool collar. Although collar-caused neck abrasions have continued to occur sporadically, a retrospective assessment of minimum survival rates for 724 reintroduced ferrets (392 radio tagged), using data from spotlight surveys, failed to detect negative effects of radio-collars. In a South Dakota study, ferrets that were found to have hair loss or neck abrasions when collars were removed did not exhibit movements significantly different from those of radio-tagged ferrets with no evidence of neck problems. Prototype transmitters designed for surgical implantation had insufficient power output for effective use on ferrets. Early attempts at tracking radio-tagged ferrets by following the signal on foot quickly gave way to following movements by triangulation, which does not disturb the subjects. The most effective tracking stations were camper trailers fitted with rotatable, 11-element, dual-beam Yagi antennas on 6-m masts. We used radio telemetry to produce 83,275 lines of data (44,191 indications of status and 39,084 positional fixes via triangulation) for 340 radio-collared ferrets during the reintroduction program. Tracking by hand and from aircraft augmented triangulation, allowing us to locate animals that dispersed long distances and enabling us to determine causes of mortality. Justifying further use of radio telemetry on black-footed ferrets requires careful consideration of costs and benefits.

Conference Paper↗
USGS1990

Coastal mapping programs at the U.S. Fish and Wildlife Service's National Wetlands Research Center

Over the past 10 years, the U.S. Fish and Wildlife Service's (FWS) National Wetlands Research Center (center; formerly the National Coastal Ecosystems Team) has been continuously involved in the production of maps for use by coastal decision makers. The types of maps produced by the center have been national, regional, or local in scope depending on user needs. Map scales have ranged from 1:24,000 to 1:250,000. Themes depicted have included biological resources, including wetlands and seagrasses; upland habitat or land use; water resources such as water quality, bathymetry, and salinity; cultural features such as ownership, archaeological sites, and dredge-spoil disposal areas; and soils and landforms. We present overviews on the various mapping programs of the center. We highlight efforts such as the ecological inventories of the Atlantic, Gulf, and Pacific coasts; the ecological characterization atlases of the Gulf of Mexico; and the large scale (1:24,000) habitat maps of various coastal regions of the United States. Center methods and techniques are discussed, including the collaborative efforts between the center and FWS's National Wetlands Inventory for updating wetland maps and adding upland and seagrass bed delineations to inventory maps. We also make recommendations for future coastal ecosystem mapping programs that use conventional and automated mapping methodologies, such as geographic information systems and image processing.

Biological Report↗
USGS2018

Miscellaneous methods for measuring matric or water potential

A variety of techniques to measure matric potential or water potential in the laboratory and in the field are described in this section. The techniques described herein require equilibration of some medium whose matric or water potential can be determined from previous calibration or can be measured directly. Under equilibrium conditions the matric or water potential of the medium is equal to that of the soil. The techniques can be divided into: (i) those that measure matric potential and (ii) those that measure water potential (sum of matric and osmotic potentials). Matric potential is determined when the sensor matrix is in direct contact with the soil, so salts are free to diffuse in or out of the sensor matrix, and the equilibrium measurement therefore reflects matric forces acting on the water. Water potential is determined when the sensor is separated from the soil by a vapor gap, so salts are not free to move in or out of the sensor, and the equilibrium measurement reflects the sum of the matric and osmotic forces acting on the water. Seven different techniques are described in this section. Those that measure matric potential include (i) heat dissipation sensors, (ii) electrical resistance sensors, (iii) frequency domain and time domain sensors, and (iv) electro-optical switches. A method that can be used to measure matric potential or water potential is the (v) filter paper method. Techniques that measure water potential include (vi) the Dew Point Potentiameter (Decagon Devices, Inc., Pullman, WA1) (water activity meter) and (vii) vapor equilibration. The first four techniques are electronically based methods for measuring matric potential. Heat dissipation sensors and electrical resistance sensors infer matric potential from previously determined calibration relations between sensor heat dissipation or electrical resistance and matric potential. Frequency-domain and timedomain matric potential sensors measure water content, which is related to matric potential of the sensor through calibration. Electro-optical switches measure changes in light transmission through thin, nylon filters as they absorb or desorb water in response to changes in matric potential. Heat dissipation sensors and electrical resistance sensors are used primarily in the field to provide information on matric potential. Frequency domain matric potential sensors are new and have not been widely used. Time domain matric potential sensors and electro-optical switches are new and have not been commercialized. For the fifth technique, filter paper is used as the standard matrix. The filter paper technique measures matric potential when the filter paper is in direct contact with soil or water potential when separated from soil by a vapor gap. The Dew Point Potentiameter calculates water potential from the measured dew point and sample temperature. The vapor equilibration technique involves equilibration of soil samples with salt solutions of known osmotic potential. The filter paper, Dew Point Potentiameter, and vapor equilibration techniques are generally used in the laboratory to measure water potential of disturbed field samples or to measure water potential for water retention functions.

Soil Science Society of America Book Series↗
USGS2025

Comparing SMART and ELECTRE methods for multi-criteria decision analysis: A case study evaluating conservation strategies

Tradeoffs are part of the inherent challenge of making decisions. Defaulting to a prevalent method can mask methodological variation and potential improvement in decision quality. We applied and compared methods for multi-criteria decision analysis (MCDA) in real-world environmental planning. Decision makers at a global conservation organization formed teams to review and prioritize the allocation of resources across a set of existing strategies across seven teams. Each team evaluated and rated strategies based on a common scale composed of weighted objectives and criteria. Sensitivity analysis included implementing two different MCDA methods, varying strategy ratings, and using two different criteria weighting techniques. The MCDA methods were SMART (Simple Multi-Attribute Rating Technique) and ELECTRE (ELimination and Choice Expressing The REality). We tested user satisfaction between methods, overall rankings between methods, and whether MCDA improved the decision-making process. The methods did not differ in most comparisons, although participants were more likely to use the SMART method in future tradeoff decisions. We found evidence of rank correlation between methods. Lastly, the teams’ final recommendations were consistent with MCDA results. This study highlights the advantages and disadvantages of MCDA in real-world applications.

Environmental and Sustainability Indicators↗
USGS2004

Tracing sources of nitrate in snowmelt runoff using a high-resolution isotopic technique

The denitrifier method to determine the dual isotopic composition (??15N and ??18O) of nitrate is well suited for studies of nitrogen contributions to streams during runoff events. This method requires only 70 nmol of NO3- and enables high throughput of samples. We studied nitrate sources to a headwater stream during snowmelt by generating a high-temporal resolution dataset at the Sleepers River Research Watershed in Vermont, USA. In the earliest phase of runoff, stream NO3- concentrations were highest and stream discharge, NO3- concentrations, and ??18O of NO 3- generally tracked one another during diurnal melting. The isotopic composition of stream NO3- varied in-between atmospheric and groundwater NO 3- end members indicating a direct contribution of atmospherically-derived NO3- from the snow pack to the stream. During the middle to late phases of snowmelt, the source shifted toward soil NO3- entering the stream via shallow subsurface flow paths. Copyright 2004 by the American Geophysical Union.

Geophysical Research Letters↗
USGS1996

Developing a temporal database of urban development for the Baltimore/Washington region

The U.S. Geological Survey (USGS), the University of Maryland Baltimore County (UMBC), and the U.S. Bureau of the Census are working together as a multiagency, multidisciplinary team in developing a temporal database that documents the growth of the Baltimore-Washington metropolitan region. This database consists of urban development, principal transportation, shoreline, and population density change. The urban development theme, considered a primary data layer in the study of urban land transformation resulting from human impact on the land, is the focus of this paper. The Baltimore-Washington Spatial Dynamics and Human Impacts Study builds on earlier research efforts that mapped urban land use change for the San Francisco Bay area (Acevedo and Bell, 1994; Bell and others, 1995; Kirtland and others, 1994). In developing a temporal database (Acevedo and others, in press), the team participants hope to provide data that can be used to study patterns of urban growth; assess ecological, environmental, and climatic impacts of urban change; and model and predict future urbanization patterns and impacts (Clarke and others, 1996). Both the San Francisco and Baltimore-Washington regions were selected because of the rapid urban growth and resulting impacts on their ecosystems. The Chesapeake Bay region in particular has undergone extensive environmental agitation due to the hydrologic problems that have arisen from the increase in impermeable surfaces and structures, that is buildings and pavement that physically cover the soil. Because of the inability of water to percolate into the ground, little purification occurs by filtration. Water runs over paved surfaces and quickly washes high levels of toxins directly into the water system. Toxins like gasoline, oil, and fertilizer have dramatically affected the local streams, rivers, and the bay. ABSTRACT The U.S. Geological Survey, the University of Maryland Baltimore County, and the U.S. Bureau of the Census are developing a temporal database to study urban development in the Baltimore-Washington region. The primary data layer, the extent of urban or built-up areas, was compiled using a geographic information system and historical maps, remotely sensed data, digital land use data, and census information from a variety of sources. Urban land use change has been documented by the Baltimore-Washington Spatial Dynamics & Human Impact Study Team for the last 200 years. The methods, definitions, and collection criteria used to define urban or built-up areas were developed by a multi-disciplinary team that also ensures consistency in collection techniques and documentation methods for subsequent application in other regions. Animation techniques were used to visualize the database and to document the evolution of the region's urban landscape. The database is an important tool to urban and regional planners, ecologists, and global change researchers for measuring trends in urban sprawl, analyzing patterns of water pollution, understanding the impacts of development on ecosystems, and developing predictive modeling techniques to better forecast areas of urban growth. This paper describes the techniques used to map the extent of urban areas for Phase I and does not discuss Phase II in detail because the work is still in progress. In this study, urban development is defined as areas of intensive use, with much of the land covered by structures. The built-up areas are characterized by the existence of a systematic street pattern, and the relative concentration of buildings and associated intensive use areas, such as parking lots. Using this definition, urban development does not refer to political boundaries and may include incorporated or unincorporated areas as well as military reservations. ABSTRACT The U.S. Geological Survey, the University of Maryland Baltimore County, and the U.S. Bureau of the Census are developing a temporal database to study urban development in the Baltimore-Washington region. The primary data layer, the extent of urban or built-up areas, was compiled using a geographic information system and historical maps, remotely sensed data, digital land use data, and census information from a variety of sources. Urban land use change has been documented by the Baltimore-Washington Spatial Dynamics & Human Impact Study Team for the last 200 years. The methods, definitions, and collection criteria used to define urban or built-up areas were developed by a multi-disciplinary team that also ensures consistency in collection techniques and documentation methods for subsequent application in other regions. Animation techniques were used to visualize the database and to document the evolution of the region's urban landscape. The database is an important tool to urban and regional planners, ecologists, and global change researchers for measuring trends in urban sprawl, analyzing patterns of water pollution, understanding the impacts of development on ecosystems, and developing predictive modeling techniques to better forecast areas of urban growth. To build the urban component of the temporal database, a multidisciplinary team was assembled and a phased approach initiated. Expanding on procedures developed for the San Francisco Regional Study (Bell and others, 1995), the team developed data definitions, a classification scheme, compilation criteria, mapping specifications, guidelines for source materials, and metadata specifications to support development of a logically consistent dataset. Extensive documentation procedures were established to ensure consistency in data collection, and for subsequent application to other regions. Phase II was the implementation of the regional mapping effort. ABSTRACT The U.S. Geological Survey, the University of Maryland Baltimore County, and the U.S. Bureau of the Census are developing a temporal database to study urban development in the Baltimore-Washington region. The primary data layer, the extent of urban or built-up areas, was compiled using a geographic information system and historical maps, remotely sensed data, digital land use data, and census information from a variety of sources. Urban land use change has been documented by the Baltimore-Washington Spatial Dynamics & Human Impact Study Team for the last 200 years. The methods, definitions, and collection criteria used to define urban or built-up areas were developed by a multi-disciplinary team that also ensures consistency in collection techniques and documentation methods for subsequent application in other regions. Animation techniques were used to visualize the database and to document the evolution of the region's urban landscape. The database is an important tool to urban and regional planners, ecologists, and global change researchers for measuring trends in urban sprawl, analyzing patterns of water pollution, understanding the impacts of development on ecosystems, and developing predictive modeling techniques to better forecast areas of urban growth. The study area for Phase I consisted of an approximate area of 15- by 15-minute segment centered around the city of Baltimore (fig. 1). Phase I was used as a prototype for the technique development and integration that the multiagency collaborative effort would require. The regional study, Phase II, encompassed a 2-degree square centered on Washington, D.C. With more than 7 million people spread across 39 counties, the Baltimore-Washington region is one the Nation's fastest growing metropolitan areas. The two cities are rapidly merging into one.

Maryland↗