SEARCH · Geology Reports

Results for “Series in Remote Sensing”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9Linked to original sources

USGS2021

Carbon stock losses and recovery observed for a mangrove ecosystem following a major hurricane in Southwest Florida

Studies integrating mangrove in-situ observations and remote sensing analysis for specific sites often lack precise estimates of carbon stocks over time frames that include disturbance events. This study quantifies change in mangrove area from 1985 to 2018 with Landsat time series analysis, estimates above and belowground stored carbon using field data, and evaluates aboveground carbon stock changes after the 2004 Category 4, Hurricane Charley, in J.N. “Ding” Darling National Wildlife Refuge. Two allometric equation methods yielding similar results were used to estimate aboveground carbon content in three mangrove species found in the refuge. Aboveground carbon contained 67 (SE = 2) MgC ha −1 with a total refuge estimate of 74,504 MgC in 2018. Sediment contained 259 (SE = 28) MgC ha −1 for a total of 288,008 MgC in the refuge. The initial reduction in mangrove area caused by Hurricane Charley was between 0.6% and 5.3%, equivalent to between 427 MgC and 3,599 MgC under three different scenarios of carbon loss. As a result of the hurricane, approximately 61 ha of mangroves were disturbed, of which 24 ha had recovered by 2018, with 37 ha (~3% of the pre-hurricane mangrove area) still not recovered 14 years after the event. The 37 ha of mangroves that have not recovered are located in a tidally restricted area of the refuge. A longer recovery time in this area will likely result in a greater loss of carbon storage than in the rest of the refuge.

Florida↗

USGS2021

Satellites for long-term monitoring of inland U.S. lakes: The MERIS time series and application for chlorophyll-a

Lakes and other surface fresh waterbodies provide drinking water, recreational and economic opportunities, food, and other critical support for humans, aquatic life, and ecosystem health. Lakes are also productive ecosystems that provide habitats and influence global cycles. Chlorophyll concentration provides a common metric of water quality, and is frequently used as a proxy for lake trophic state. Here, we document the generation and distribution of the complete MEdium Resolution Imaging Spectrometer (MERIS; Appendix A provides a complete list of abbreviations) radiometric time series for over 2300 satellite resolvable inland bodies of water across the contiguous United States (CONUS) and more than 5,000 in Alaska. This contribution greatly increases the ease of use of satellite remote sensing data for inland water quality monitoring, as well as highlights new horizons in inland water remote sensing algorithm development. We evaluate the performance of satellite remote sensing Cyanobacteria Index (CI)-based chlorophyll algorithms, the retrievals for which provide surrogate estimates of phytoplankton concentrations in cyanobacteria dominated lakes. Our analysis quantifies the algorithms' abilities to assess lake trophic state across the CONUS. As a case study, we apply a bootstrapping approach to derive a new CI-to-chlorophyll relationship, ChlBS, which performs relatively well with a multiplicative bias of 1.11 (11%) and mean absolute error of 1.60 (60%). While the primary contribution of this work is the distribution of the MERIS radiometric timeseries, we provide this case study as a roadmap for future stakeholders' algorithm development activities, as well as a tool to assess the strengths and weaknesses of applying a single algorithm across CONUS.

Alaska, Minnesota↗

USGS2020

Development and validation of the CHIRTS-daily quasi-global high-resolution daily temperature data set

We present a high-resolution daily temperature data set, CHIRTS-daily, which is derived by merging the monthly Climate Hazards center InfraRed Temperature with Stations climate record with daily temperatures from version 5 of the European Centre for Medium-Range Weather Forecasts Re-Analysis. We demonstrate that remotely sensed temperature estimates may more closely represent true conditions than those that rely on interpolation, especially in regions with sparse in situ data. By leveraging remotely sensed infrared temperature observations, CHIRTS-daily provides estimates of 2-meter air temperature for 1983–2016 with a footprint covering 60°S-70°N. We describe this data set and perform a series of validations using station observations from two prominent climate data sources. The validations indicate high levels of accuracy, with CHIRTS-daily correlations with observations ranging from 0.7 to 0.9, and very good representation of heat wave trends.

Scientific Data↗

USGS2008

Technical Manual for the Geospatial Stream Flow Model (GeoSFM)

The monitoring of wide-area hydrologic events requires the use of geospatial and time series data available in near-real time. These data sets must be manipulated into information products that speak to the location and magnitude of the event. Scientists at the U.S. Geological Survey Earth Resources Observation and Science (USGS EROS) Center have implemented a hydrologic modeling system which consists of an operational data processing system and the Geospatial Stream Flow Model (GeoSFM). The data processing system generates daily forcing evapotranspiration and precipitation data from various remotely sensed and ground-based data sources. To allow for rapid implementation in data scarce environments, widely available terrain, soil, and land cover data sets are used for model setup and initial parameter estimation. GeoSFM performs geospatial preprocessing and postprocessing tasks as well as hydrologic modeling tasks within an ArcView GIS environment. The integration of GIS routines and time series processing routines is achieved seamlessly through the use of dynamically linked libraries (DLLs) embedded within Avenue scripts. GeoSFM is run operationally to identify and map wide-area streamflow anomalies. Daily model results including daily streamflow and soil water maps are disseminated through Internet map servers, flood hazard bulletins and other media.

Open-File Report↗

USGS2021

Riparian area changes in greenness and water use on the Lower Colorado River in the USA from 2000-2020

Declines in riparian ecosystem greenness and water use have been observed in the delta of the Lower Colorado River (LCR) since 2000. The purpose of our case study was to measure these metrics on the U.S. side of the border between Hoover and Morelos Dams to see if declining greenness was unique to the portion of the river in Mexico. In this case study, five riparian reaches of the LCR from Hoover to Morelos Dam since 2000 were studied to evaluate trends in riparian ecosystem health. We measure these riparian woodlands using remotely sensed measurements of the two-band Enhanced Vegetation Index (EVI2; a proxy for greenness); daily evapotranspiration (ET; mmd −1 ) using EVI2 (ET(EVI2)); and an annualized ET based on EVI2, the Phenology Assessment Metric (PAM ET), an annualized ET using Landsat time-series. A key finding is that riparian health and its water use has been in decline since 2000 on the U.S. portion of the LCR, depicting a loss of green vegetation over the last two decades. EVI2 results show a decline of −13.83%, while average daily ET(EVI2) between the first and last decade had a decrease of over 1 mmd −1 (−27.30%) and the respective average PAM ET losses were 170.91 mmyr −1 (−17.95%). The difference between the first and last five-year periods, 2000–2005 and 2016–2020, showed the largest decrease in daily ET(EVI) of 1.24 mmd −1 (−32.61%). These declines come from a loss in healthy, green, riparian plant-cover, not a change in plant water use efficiency nor efficient use of managed water resources. Our results suggest further deterioration of biodiversity, wildlife habitat and other key ecosystem services on the U.S. portion of the LCR.

Arizona, California↗

USGS2019

Satellite-detected forest disturbance forecasts American marten population decline: The case for supportive space-based monitoring

Limited monitoring resources often constrain rigorous monitoring practices to species or populations of conservation concern. Insufficient monitoring can induce a tautology as lack of monitoring resources makes it difficult to determine whether a species or population deserves additional monitoring resources. When in-situ monitoring resources are limited, remote habitat monitoring could be a useful supplementary tool, as linking parameterized species distribution models to spatially explicit time-series of environmental correlates allows iterative prediction of population change. Yet the performance of predictive forecasts or hindcasts has been difficult to evaluate. We paired contemporary field data, historic population estimates, and a remotely-sensed archive of landscape change to evaluate predictions of American marten ( Martes americana ) population decline owing to habitat loss in Maine, USA. We estimated contemporary spatial patterns in marten density relative to landscape disturbance with spatial capture-recapture models. We compared current density estimates to historical density calculations to evaluate population decline, and compared historical calculations to habitat-based model predictions to evaluate the efficacy of habitat monitoring as a proxy for direct monitoring. Marten density was negatively associated with the proportion of surrounding regenerating forest, and point estimates within focal townships were 50–80% lower than historical calculations. Habitat-based hindcasts of marten density across our entire focal area interest suggested a smaller population decline (roughly 50%) within our focal area. Thus, although habitat-based predictions underpredicted marten decline, they provided correct directional inference. Habitat monitoring and predictions from species distribution models may provide useful inference about population changes given trends in habitat at limited expense when in-situ information is lacking.

Maine↗

USGS2021

Global cropland-extent product at 30-m resolution (GCEP30) derived from Landsat satellite time-series data for the year 2015 using multiple machine-learning algorithms on Google Earth Engine cloud

Executive Summary Global food and water security analysis and management require precise and accurate global cropland-extent maps. Existing maps have limitations, in that they are (1) mapped using coarse-resolution remote-sensing data, resulting in the lack of precise mapping location of croplands and their accuracies; (2) derived by collecting and collating national statistical data that are often subjective, leading to substantial uncertainties in cropland-area estimates, as well as their locations; and (3) extracted from one or more classes of a land use–land cover product in which cropland classes are not the focus of mapping, leading to their mixing with other classes and creating significant errors of omission and commission. These limitations can be overcome by producing high-resolution cropland-extent maps using satellite-sensor data, such as Landsat 30-m resolution or higher. The most fundamental cropland product is the high-resolution cropland-extent map because all higher level cropland products, such as crop-watering method (that is, whether crops are irrigated or rainfed), crop types, cropping intensities, cropland fallows, crop productivity, and crop-water productivity, are dependent on a precise and accurate cropland-extent product. Given these realities, the overarching goal of this study was to produce a Landsat satellite-derived global cropland-extent product at 30-m resolution. The work, which involved a paradigm shift in how global cropland-extent maps are produced, involved the following five key steps: (1) petabyte-scale computing that involved multiyear, 8- to 16-day, time-series Landsat 30-m resolution data for the global land surface; (2) composition of analysis-ready data (ARD) cubes; (3) creation of a large global-reference data hub for machine learning; (4) use of multiple machine-learning algorithms (MLAs) by writing software and computing in the cloud; and (5) Google Earth Engine (GEE) cloud computing. The five key steps involved nine distinct phases. First, the world was segmented into 74 agroecological zones (AEZs). Second, Landsat 8- to 16-day data were used to time-composite 10-band (blue, green, red, near-infrared, short-wave infrared band 1, short-wave infrared band 2, thermal infrared, enhanced vegetation index, normalized difference water index, and normalized difference vegetation index) Landsat 30-m resolution data cubes for every 2- to 4-month time period during 3- to 4-year periods (stated as nominal-year 2015 or, simply, 2015), along with two additional 30-m resolution bands (Shuttle Radar Topography Mission elevation, and slope) in each of the 74 AEZs. Third, more than 100,000 reference-training data samples were collected using ground data (some of which were collected using a mobile application), as well as submeter- to 5-m-resolution, very high-resolution imagery sourced from other reliable sources. Fourth, reference-training data were used to create a knowledge base for separating cropland from noncropland. Fifth, MLAs such as the pixel-based supervised random forest and support-vector machines were written on the GEE using Python and JavaScript. Sixth, object-based recursive hierarchical segmentation algorithm was used, in addition to MLAs, to overcome uncertainties. Seventh, MLAs used the knowledge base to classify and separate cropland from noncropland. Eighth, accuracy assessment was conducted by generating error matrices for each of the 74 AEZs using 19,171 independent validation-data samples. Ninth, cropland areas were computed for all countries of the world and compared with United Nation’s (UN’s) Food and Agricultural Organization (FAO) and other national statistics. The outcome was a Landsat-derived global cropland-extent product at 30-m resolution (GCEP30), which has an overall accuracy of 91.7 percent. For the cropland class, producer’s accuracy was 83.4 percent, and user’s accuracy was 78.3 percent. GCEP30 calculated (using direct pixel count) the global net-cropland area (GNCA) for the year 2015 as 1.873 billion hectares (~12.6 percent of the Earth’s terrestrial area). The continental cropland distribution as a percentage of GNCA was Asia, 33 percent; Europe, 25.5 percent; Africa, 16.7 percent; North America, 14.4 percent; South America, 8.1 percent; and Australia and Oceania, 2.4 percent. The worldwide cropland areas in GCEP30 for 2015 were higher by 236 to 299 million hectares (Mha) compared to national statistics reported elsewhere for the same year (for example, in Food and Agriculture Organization’s corporate statistical database [FAOSTAT] and in the monthly irrigated and rainfed crop areas [MIRCA] database). The global cropland area reported for 2015 increased by 344 Mha (22.5 percent), compared to the year 2000. During the same period (2000–2015), the world’s population increased by 20 percent. Whereas some of these areal increases are real increases in cropland areas, others are due to the types of data, methods, and approaches used. Using the highest known resolution (compared to previous coarse-resolution global products) enabled this study to capture fragmented croplands. Coarse-resolution data compute areas on the basis of subpixels, which, for a large proportion of certain land use–land cover classes, will show only a certain percentage of the total pixel area as actual area. Subpixel areas can lead to substantial uncertainties in area computation, as determining the exact fraction of cropland areas within a coarse-resolution pixel is resource intensive and subject to errors. Other innovations in GCEP30 include reference-data hubs, machine learning, and cloud computing. Cropland areas in 214 countries, territories, departments, and regions were calculated for the year 2015 using GCEP30, on the basis of UN’s global administrative unit layers (GAUL) boundaries. The 10 leading countries in terms of cropland area (as a percentage of the GNCA) were India (9.6 percent), United States (8.95 percent), China (8.82 percent), Russia (8.32 percent), Brazil (3.42 percent), Ukraine (2.32 percent), Canada (2.29 percent), Argentina (2.05 percent), Indonesia (2 percent), and Nigeria (1.91 percent). Together, these 10 countries occupy 50 percent of the global cropland, and they have 52 percent of the global population. Their combined cropland area increased by 2 percent between 2000 and 2015, compared to the substantial increase in population of 517 million (15.5 percent). Together, India, United States, China, and Russia encompass 36 percent of the total area. In the United States and Canada, from 2000 to 2015, cropland decreased by about 2 percent, whereas their populations increased by 14 and 13 percent, respectively. The additional food requirements in these 10 countries, which are caused by increased populations, as well as increasing nutritional demands, are met by production increases in existing cropland or through virtual food trade, or both. More than 18 countries, territories, departments, or regions had 60 percent or more of their geographic area as cropland: Republic of Moldova, San Marino, and Hungary had more than 80 percent of the country’s area as cropland; Denmark, Ukraine, Ireland, and Bangladesh, 70 to 80 percent; and Uruguay, Netherlands, United Kingdom, Spain, Lithuania, Poland, Gaza Strip, Czechia, Italy, India, and Azerbaijan, 60 to 70 percent. Europe and South Asia can be considered agricultural capitals of the world, on the basis of their percentages of geographic area as cropland. United States, China, and Russia, which all have high cropland areas, are ranked second, third, and fourth in the world; India is ranked first. However, the amount of cropland as a percentage of the country’s geographic area is relatively very low for United States (18.3 percent), China (17.7 percent), and Russia (9.5 percent), whereas it is 60.5 percent for India. Most African and South American countries, territories, departments, or regions have less than 15 percent of their geographic area as cropland. China and India together house 36 percent of the world’s population; however, between 2000 and 2015, the amount of China’s cropland area fell by 18.9 percent, owing to urban expansion and the abandonment of farmlands caused by demographic changes (that is, the movement of population from villages to cities). In contrast, China’s population grew by 10 percent. The amount of India’s cropland increased by 8.5 percent, whereas its population grew by 20 percent. This study showed that, out of the 10 leading cropland countries, Ukraine, Nigeria, Russia, and Indonesia showed an 18 to 31 percent increase in cropland areas, on the basis of GCEP30 by the year 2015, compared to 2000. Nigeria’s cropland area increased by 25 percent, and its population increased by 31 percent in the same period. In these countries, food security is maintained by cropland expansion, productivity increases, and virtual food trade. Nevertheless, this trend of increasing net-cropland area and productivity will likely become difficult to maintain, owing to diminishing arable lands and plateauing of 50 years of continual yield increases, requiring policymakers to explore novel and data-supported approaches to solving future food security issues. The GCEP30 product, which can be browsed at full resolution at www.croplands.org , has been released for public download and use through U.S. Geological Survey (USGS)–National Aeronautics and Space Administration (NASA) Land Processes Distributed Active Archive Center (see https://lpdaac.usgs.gov/news/release-of-gfsad-30-meter-cropland-extent-products/ ).

Professional Paper↗

USGS2024

Observing systems, modeling, and forecasting

Predicting harmful algal blooms (HABs) requires integrating physical, chemical, and biological data collected from observing networks and then assimilating these data into models, which are used to generate forecasts. In 2005, the Harmful Algal Research and Response: A National Environmental Science Strategy 2005-2015 (HARRNESS, 2005) made recommendations on how to improve HAB modeling and forecasting over the next decade. Key HARRNESS recommendations related to sensing, networking, and modeling HABs included: ● Support the development and validation of new and improved technologies for remote cell and toxin detection, and for modeling and forecasting, ● Improve coordination of monitoring/ and modeling efforts, both at national and regional levels, ● Improve the use of networking technologies for monitoring and modeling efforts, ● Conduct sustained time series measurements of the biotic, chemical, and physical environments impacted by HABs, ● Develop food web models on the ecosystem fate and effects of toxins, ● Develop and improve species-specific models that link to physical-biological models. Here we review HAB observing, modeling, and forecasting advances and technologies and recommend research and management priorities for the next decade and beyond. Our report encompasses sensing technologies, sensor networking and data management, models and forecasts, and the paths to operationalize forecasts. Continued improvements of deployable sensors are foundational to improving early warning indicators, models, and forecasts, which are only as good as the underlying data. Sensing technology has advanced considerably in the last decade; for example, more capable fluorometric pigment sensors can track changes in bloom biomass in real-time. Additionally, automated imaging/classifying systems to identify and quantify key harmful algal (HA) taxa are being routinely deployed. However, deployable toxin sensors are available for only some HAB toxins and continue to be identified as a critical need by researchers and managers. As more and improved sensors and technologies become available, the data quality associated with each sensor needs to be assessed. Data quality encompasses the reliability, accuracy, and uncertainty associated with sensor-generated data. These data need to be of known quality so that researchers, managers, and end-users can reliably determine if the information is appropriate for their intended applications. Many of the data quality recommendations from HARRNESS (2005) are still relevant and have been reiterated within the management community. Understanding and documenting data quality, and when applicable, standardizing best practices for sensor use, continue to be recommended.

Report↗

USGS2013

Surface mineral maps of Afghanistan derived from HyMap imaging spectrometer data, version 2

This report presents a new version of surface mineral maps derived from HyMap imaging spectrometer data collected over Afghanistan in the fall of 2007. This report also describes the processing steps applied to the imaging spectrometer data. The 218 individual flight lines composing the Afghanistan dataset, covering more than 438,000 square kilometers, were georeferenced to a mosaic of orthorectified Landsat images. The HyMap data were converted from radiance to reflectance using a radiative transfer program in combination with ground-calibration sites and a network of cross-cutting calibration flight lines. The U.S. Geological Survey Material Identification and Characterization Algorithm (MICA) was used to generate two thematic maps of surface minerals: a map of iron-bearing minerals and other materials, which have their primary absorption features at the shorter wavelengths of the reflected solar wavelength range, and a map of carbonates, phyllosilicates, sulfates, altered minerals, and other materials, which have their primary absorption features at the longer wavelengths of the reflected solar wavelength range. In contrast to the original version, version 2 of these maps is provided at full resolution of 23-meter pixel size. The thematic maps, MICA summary images, and the material fit and depth images are distributed in digital files linked to this report, in a format readable by remote sensing software and Geographic Information Systems (GIS). The digital files can be downloaded from http://pubs.usgs.gov/ds/787/downloads/.

Data Series↗

USGS2020

Quantifying drought’s influence on moist soil seed vegetation in California’s Central Valley through remote sensing

Across the Central Valley of California, millions of wintering waterfowl rely on moist soil seed (MSS) plants that grow in managed seasonal wetlands as a critical source of food. Estimates of MSS plant production are used to set waterfowl habitat targets yet this information is not well known. We created the first Central Valley-wide time series maps of MSS plant distributions and productivity. We found that MSS plant seed yield declined in critical drought years, which corresponded with reduced water delivery to managed wetlands. Our results provide improved food resource estimates and information to help managers prioritize actions as water supply becomes more uncertain with climate change.

California↗

USGS2012

Ecosystem performance monitoring of rangelands by integrating modeling and remote sensing

Monitoring rangeland ecosystem dynamics, production, and performance is valuable for researchers and land managers. However, ecosystem monitoring studies can be difficult to interpret and apply appropriately if management decisions and disturbances are inseparable from the ecosystem's climate signal. This study separates seasonal weather influences from influences caused by disturbances and management decisions, making interannual time-series analysis more consistent and interpretable. We compared the actual ecosystem performance (AEP) of five rangeland vegetation types in the Owyhee Uplands for 9 yr to their expected ecosystem performance (EEP). Integrated growing season Normalized Difference Vegetation Index data for each of the nine growing seasons served as a proxy for annual AEP. Regression-tree models used long-term site potential, seasonal weather, and land cover data sets to generate annual EEP, an estimate of ecosystem performance incorporating annual weather variations. The difference between AEP and EEP provided a performance measure for each pixel in the study area. Ecosystem performance anomalies occurred when the ecosystem performed significantly better or worse than the model predicted. About 14% of the Owyhee Uplands showed a trend of significant underperformance or overperformance ( P <0.10). Land managers can use results from weather-based rangeland ecosystem performance models to help support adaptive management strategies.

Oregon;Idaho↗

USGS2019

sUAS-based remote sensing of river discharge using thermal particle image velocimetry and bathymetric lidar

This paper describes a non-contact methodology for computing river discharge based on data collected from small Unmanned Aerial Systems (sUAS). The approach is complete in that both surface velocity and channel geometry are measured directly under field conditions. The technique does not require introducing artificial tracer particles for computing surface velocity, nor does it rely upon the presence of naturally occurring floating material. Moreover, no prior knowledge of river bathymetry is necessary. Due to the weight of the sensors and limited payload capacities of the commercially available sUAS used in the study, two sUAS were required. The first sUAS included mid-wave thermal infrared and visible cameras. For the field evaluation described herein, a thermal image time series was acquired and a particle image velocimetry (PIV) algorithm used to track the motion of structures expressed at the water surface as small differences in temperature. The ability to detect these thermal features was significant because the water surface lacked floating material (e.g., foam, debris) that could have been detected with a visible camera and used to perform conventional Large-Scale Particle Image Velocimetry (LSPIV). The second sUAS was devoted to measuring bathymetry with a novel scanning polarizing lidar. We collected field measurements along two channel transects to assess the accuracy of the remotely sensed velocities, depths, and discharges. Thermal PIV provided velocities that agreed closely (R^2 = 0.82 and 0.64) with in situ velocity measurements from an acoustic Doppler current profiler (ADCP). Depths inferred from the lidar closely matched those surveyed by wading in the shallower of the two cross sections (R^2 = 0.95) but the agreement was not as strong for the transect with greater depths (R^2 = 0.61). Incremental discharges computed with the remotely sensed velocities and depths were greater than corresponding ADCP measurements by 22% at the first cross section and < 1% at the second.

Colorado↗

USGS2025

Mapping ecological states in the upper Colorado River basin: Implications for fire management

Spatially explicit information on ecosystem dynamics that offers a mechanistic understanding of ecological processes can benefit environmental management. Broad-scale maps based on state-and-transition models provide valuable insight into transitions among ecological states resulting from specific drivers within areas sharing similar climatic and edaphic characteristics ecological sites (ES). We aimed to quantify ecological dynamics of two ES groups in the Upper Colorado River Basin from 1986 to 2022 through annual maps of ecological states and assess potential drivers of observed state change. This region comprises important sagebrush shrublands and pinyon-juniper woodlands affected by non-native annual grass invasion, wildfires, and drought-induced tree mortality. Using field-based and remote sensing data, we modeled vegetation states using random forest models and mapped the states annually from 1986 to 2022. To demonstrate the utility of the state maps for monitoring and management, we used this time series of maps to investigate the influences of fire and drought on state occurrence. Our findings revealed a statistically significant increase in states invaded by non-native annual species (Invaded state), which replaced Grassland and Shrubland states, while Shrubland states decreased significantly, transitioning to invaded and Woodland states. Invaded states had the highest likelihood of burning, followed by Woodlands. Drought was associated with increased area of Grassland and Bare states, but with decreased area of invaded and Shrubland states. These results indicate an accelerating fire cycle is potentially leading to ongoing regional environmental degradation. Despite increasing drought conditions during the study period, the invaded states continued to increase in area, indicating additional underlying mechanisms. Our reproducible, broad-scale, ecologically-driven state mapping process enhances understanding of how drought, fire, and invasion by non-native plants can transform semiarid landscapes of the western USA.

Arizona, Colorado, New Mexico, Utah, Wyoming↗

USGS2020

Measuring channel planform change from image time series: A generalizable, spatially distributed, probabilistic method for quantifying uncertainty

Channels change in response to natural or anthropogenic fluctuations in streamflow and/or sediment supply and measurements of channel change are critical to many river management applications. Whereas repeated field surveys are costly and time‐consuming, remote sensing can be used to detect channel change at multiple temporal and spatial scales. Repeat images have been widely used to measure long‐term channel change, but these measurements are only significant if the magnitude of change exceeds the uncertainty. Existing methods for characterizing uncertainty have two important limitations. First, while the use of a spatially variable image co‐registration error avoids the assumption that errors are spatially uniform, this type of error, as originally formulated, can only be applied to linear channel adjustments, which provide less information on channel change than polygons of erosion and deposition. Second, previous methods use a level‐of‐detection (LoD) threshold to remove non‐significant measurements, which is problematic because real changes that occurred but were smaller than the LoD threshold would be removed. In this study, we present a new method of quantifying uncertainty associated with channel change based on probabilistic, spatially varying estimates of co‐registration error and digitization uncertainty that obviates a LoD threshold. The spatially distributed probabilistic (SDP) method can be applied to both linear channel adjustments and polygons of erosion and deposition, making this the first uncertainty method generalizable to all metrics of channel change. Using a case study from the Yampa River, Colorado, we show that the SDP method reduced the magnitude of uncertainty and enabled us to detect smaller channel changes as significant. Additionally, the distributional information provided by the SDP method allowed us to report the magnitude of channel change with an appropriate level of confidence in cases where a simple LoD approach yielded an indeterminate result.

Earth Surface Processes and Landforms↗

USGS1983

Infrared remote sensing for monitoring rainfall

Evaluations of thermal infrared satellite data from TIROS-N and the Heat Capacity Mapping Mission (HCMM) showed that rainfall distribution patterns could be reliably detected on images acquired up to at least three days after the event. The temperature relationship decreased eight days after the event when soil variations influenced the signal. A time-series analysis reduced thermal variability normally observed over diverse landscapes and increased the sensitivity of the procedures. The method of repetitive low-resolution thermal observations could be operationally employed over large geographic regions with currently available satellite systems. The results would augment the existing rain gauge stations by increasing the spatial sensitivity and the reliability of detection and mapping individual rainfall events.

Agricultural Water Management↗

USGS2012

A vectorial capacity product to monitor changing malaria transmission potential in epidemic regions of Africa

Rainfall and temperature are two of the major factors triggering malaria epidemics in warm semi-arid (desert-fringe) and high altitude (highland-fringe) epidemic risk areas. The ability of the mosquitoes to transmit Plasmodium spp. is dependent upon a series of biological features generally referred to as vectorial capacity. In this study, the vectorial capacity model (VCAP) was expanded to include the influence of rainfall and temperature variables on malaria transmission potential. Data from two remote sensing products were used to monitor rainfall and temperature and were integrated into the VCAP model. The expanded model was tested in Eritrea and Madagascar to check the viability of the approach. The analysis of VCAP in relation to rainfall, temperature and malaria incidence data in these regions shows that the expanded VCAP correctly tracks the risk of malaria both in regions where rainfall is the limiting factor and in regions where temperature is the limiting factor. The VCAP maps are currently offered as an experimental resource for testing within Malaria Early Warning applications in epidemic prone regions of sub-Saharan Africa. User feedback is currently being collected in preparation for further evaluation and refinement of the VCAP model.

Journal of Tropical Medicine↗

USGS2021

System characterization report on the Gaofen-1

Executive Summary This report addresses system characterization of Gaofen-1 and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence in 2020. These reports present the detail methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Gaofen represents a series of Chinese high-resolution Earth observation satellites. More than 12 satellites have been launched in the Gaofen series, beginning with Gaofen-1 in 2013. Satellites within the series have varying infrared, radar, and optical imaging capabilities. The primary goal for the satellite is to provide near real-time observations for climate change monitoring, geographical mapping, precision agriculture support, environmental and resource surveying, and disaster prevention. More information on Chinese satellites and sensors is available within the “2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and at http://www.cnsageo.com/#/detailIndex?secondIndex=2&id=3&code=8 . The Earth Resources Observation and Science Cal/Val Center of Excellence System Characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that Gaofen-1 has an interior geometric performance of −0.48 meter (m) (−0.03 pixel) northing and 0.42 m (0.03 pixel) easting offset for band 1, −0.99 m (−0.06 pixel) northing and −0.38 m (−0.02 pixel) easting offset for band 2, −0.45 m (−0.03) northing and 0.83 m (0.05 pixel) easting offset for band 3, −3.20 m (−0.20 pixel) northing and 1.44 m (0.09 pixel) easting offset for band 4 in band-to-band registration. Similarly, Gaofen-1 has an exterior geometric performance of 7.50 m (0.48 pixel) easting and 109.50 m (7.30 pixels) northing offset in comparison to the Landsat 8 Operational Land Imager; a radiometric performance in the range of −0.014 to 0.149 (absolute reflective difference); and a spatial performance in the range of 1.1 to 2.0 pixels at full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.040 to 0.250.

Open-File Report↗

USGS2016

Including land cover change in analysis of greenness trends using all available Landsat 5, 7, and 8 images: A case study from Guangzhou, China (2000–2014)

Remote sensing has proven a useful way of evaluating long-term trends in vegetation “greenness” through the use of vegetation indices like Normalized Differences Vegetation Index (NDVI) and Enhanced Vegetation Index (EVI). In particular, analyses of greenness trends have been performed for large areas (continents, for example) in an attempt to understand vegetation response to climate. These studies have been most often used coarse resolution sensors like Moderate Resolution Image Spectroradiometer (MODIS) and Advanced Very High Resolution Radiometer (AVHRR). However, trends in greenness are also important at more local scales, particularly in and around cities as vegetation offers a variety of valuable ecosystem services ranging from minimizing air pollution to mitigating urban heat island effects. To explore the ability to monitor greenness trends in and around cities, this paper presents a new way for analyzing greenness trends based on all available Landsat 5, 7, and 8 images and applies it to Guangzhou, China. This method is capable of including the effects of land cover change in the evaluation of greenness trends by separating the effects of abrupt and gradual changes, and providing information on the timing of greenness trends. An assessment of the consistency of surface reflectance from Landsat 8 with past Landsat sensors indicates biases in the visible bands of Landsat 8, especially the blue band. Landsat 8 NDVI values were found to have a larger bias than the EVI values; therefore, EVI was used in the analysis of greenness trends for Guangzhou. In spite of massive amounts of development in Guangzhou from 2000 to 2014, greenness was found to increase, mostly as a result of gradual change. Comparison of the greening magnitudes estimated from the approach presented here and a Simple Linear Trend (SLT) method indicated large differences for certain time intervals as the SLT method does not include consideration for abrupt land cover changes. Overall, this analysis demonstrates the importance of considering land cover change when analyzing trends in greenness from satellite time series in areas where land cover change is common.

Guangzhou↗