Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Names”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9Linked to original sources
USGS1983

INTERACTIVE NAME PLACEMENT FOR PROVISIONAL MAPS.

Computer generation and placement of map type has been refined into a production mode at Mid-Continent Mapping Center (MCMC) for USGS 1:24,000- and 1:25,000-scale Provisional maps. The map collar program is written in FORTRAN using batch processing that allows the program to work in the background.

Conference Paper↗
USGS2020

Improving the positional and vertical accuracy of named summits above 13,000 ft in the United States

The National Map (TNM) portal provides public access to U.S. Geological Survey (USGS) high-resolution topographic datasets, and maps from the Historical Topographic Map Collection (HTMC). Elevation values shown on HTMC maps were obtained from ground spot elevation measurements, as compared to today’s elevation measurements derived from more efficient methods, such as lidar, radar, or sonar. These spot elevations were collected either by levelling in the field or by photogrammetrists in the office, and are called mass points with post-spacings of two-arc seconds (arcsec), approximately 60 meters depending on latitude, in steep terrain and one-half arcsec, approximately 15 meters, in flat terrain (Federal Geographic Data Committee 1997). The vertical accuracy of spot elevations is ± 10 feet. Most spot elevations were used only in contour derivation to create a more spatially continuous representations of terrain, but some were also labelled on the maps to supply accurate elevations of culturally important features such as mountain peaks, gaps, and road junctions.

Conference Paper↗
USGS1987

Checklist of vertebrates of the United States, the U.S. territories, and Canada

On 30 January 1980 the Policy Group of the 1978 Interagency Agreement on Classifications and Inventory established a work group on fish and wildlife species names. The participating agencies were the Fish and Wildlife Service, Forest Service, Bureau of Land Management, Geological Survey, and Soil Conservation Service. The Fish and Wildlife Service was assigned the role of establishing and leading this work group in developing a national list of standard vertebrate species names that is up-to-date and accurate. The Association of Systematic Collections was contracted to develop the reference list. This publication is a revision of portions of the list (amphibians, reptiles, birds, and mammals), including updating to the end of 1985. The geographic areas encompassed by this list are: the United States, including Alaska and Hawaii; the Commonwealth of Puerto Rico, the U.S. Virgin Islands, and Navassa Island; the Trust Territory of the Pacific Islands (the Caroline Islands, Palau Islands, Marshall Islands, and northern Mariana Islands); and the U.S. Territories of American Samoa, Baker Island, Guam, Howland Island, Jarvis Island, the Johnston Islands, Kingman Reef, the Midway Islands, and Wake Islands. Canadian species that do not also occur in the United States have been included. This list includes the names of all Recent species known to occur, or to have occurred, in the geographic areas indicated above. No distinction is made between resident and migratory species or between those that occur regularly and those of casual or accidentally occurrence. The occurrence of all species listed is documented by specimen or photographic evidence. Zoo, aquarium, game park, and hunting preserve populations are not listed, nor are unestablished escapes from such populations. Species that are extinct are marked with a 1 . Species whose only occurrence in an area is the result of introduction by man are marked with a 2 . Species introduced into one area but native to another covered by this checklist do not have a superscript, nor do species for which the documentation of introduction is equivocal. Species listed as Endangered or Threatened (as of January 1987) throughout their ranges are marked with a 3 , whereas species with only selected subspecies or populations so listed are marked with a 4 . Refer to the Code of Federal Regulations (50 CFR) for further details on the Endangered Species Act of 1973 and its requirements. The list includes the scientific names and English names of taxa from order to species. At the level of genus and above, more than one English name may be given; this is to indicate content, not alternative names. English (common or vernacular) names for species vary from region to region and from author to author. The name "gopher", for example, has been applied to kinds of animals as diverse as pocket gophers, ground squirrels, and turtles. Most species have names in other languages as well as English names, and some species lack generally accepted English names. A single English name is given for each species in this list to promote uniformity and to permit more precise communication among users. Accurate communication about species can be assured only by using the scientific names, including their authors and date. We provide an "exploded" illustration (Fig. 1) of a typical portion of the list and identify the elements of each citation.

Resource Publication↗
USGS1994

Revised correlation chart of coal beds, coal zones, and key stratigraphic units in the Pennsylvanian rocks of eastern Kentucky

This report revises Miscellaneous Field Studies Map MF-1188 (Rice and Smith, 1980). Major revisions to the original correlation chart include formal naming of key marine units in Kentucky and replacement of informally named marine units incorrectly projected into Kentucky from adjacent states. Also included in the report is the proper correlation of some regionally recognized coal bed names that have been incorrectly projected into Kentucky, particularly from Ohio and West Virginia. Besides these additions and corrections, minor changes have been made to the correlation chart, all of which are discussed below in detail. The Pennsylvania rocks of the eastern Kentucky coal field underlie an area of about 27,000 square kilometers (see index map). Largely because of the size and stratigra[hic complexity of the area, Huddle and others (1963, p. 31) divided the coal field into six coal-reserve districts. District boundaries utilize state and county line as well as geologic features, drainage areas, and coal producing areas. Their division is followed herein because, in general, each of the districts has a characteristic stratigraphic nomenclature, particularly with regard to coal bed names. The six districts are the Princess, Licking River, Big Sandy, Hazard, Southwestern, and Upper Cumberland River district is divided into the Middlesboro and Harlan subdistricts. The correlation chart lists most of the stratigraphic units of Pennsylvanian age used in eastern Kentucky, and is concerned principally with coal bed names used in publications since about 1950, especially all of the names of coal beds for which resources and reserves have been calculated. Coal constitutes only a small percentage of the total Pennsylvanian-rock sequence, but is present in as many as 26 major coal zones that have been prospected and mined extensively in all parts of the coal field since the early 1900's. Coal names listed in this chart represent coal beds that have been mined commercially or used locally by residents of the area. Not every coal bed listed under a district in the chart is found in all parts of that district, nor has every coal bed been given a name. For the sake of saving space, coal beds commonly identified as a "rider" coal bed (commonly a minor coal or split above the main bed) or as a "marker" coal bed (a minor coal below the main bed) are not included in the chart because they do not contribute to the overall stratigraphic framework of the coal field. Most of the stratigraphic units listed in the correlation chart are defined and described in detail in almost 200 geologic reports of the Geologic Quadrangle (GQ) Map Series of the U.S. Geological Survey (USGS). These maps were published as a result of the cooperative geological mapping program of the USGS and the Kentucky Geological Survey; which was begun in 1960 and was completed in 1978. The GQ maps, at a scale of 1:24,000, describe the lithology and local stratigraphy and identify many coal beds by noth local and regional names. Other sources of stratigraphic information and coal bed names used in the construction of the chart include USGS bulletins dealing with the coal resources of single 7.5-minute quadrangles (Englund, 1955; Adkinson, 1957; Welch, 1958; Bergin, 1962). The coal resources of eastern Kentucky as a whole have been described by Huddle and others (1963) and detailed reports on the stratigraphy and coal resources of significant areas in eastern Kentucky have been made by Huddle and Englund (1966) and Englund (1968). An additional source of coal bed names is the SEAMS database, which is jointly sponsored by the University of Kentucky Center for Applied Energy Research, the Kentucky Geological Survey, and the Kentucky Department of Mines and Minerals. The SEAMS database identifies the stratigraphic position and location of all coal beds in the eastern and the western Kentucky coal fields as well as those of bordering areas in adjacent states. The databases includes references to all coal-bed names used in Kentucky, especially those shown on coal company mine maps. Local names of coal beds in the database file that are not generally used in publications are listed in table 1 together with their regional equivalents.

Kentucky↗
USGS1986

Aquifer-nomenclature guidelines

Guidelines and recommendations for naming aquifers are presented to assist authors of geohydrological reports in the United States Geological Survey, Water Resources Division. The hierarchy of terms that is used for water- yielding rocks from largest to smallest is aquifer system, aquifer, and zone. If aquifers are named, the names should be derived from lithologic terms, rock-stratigraphic units, or geographic names. The following items are not recommended as sources of aquifer names: time-stratigraphic names, relative position, alphanumeric designations, depositional environment, depth of occurrence, acronyms, and hydrologic conditions. Confining units should not be named unless doing so clearly promotes understanding of a particular aquifer system. Sources of names for confining units are similar to those for aquifer names, i.e. lithologic terms, rock-stratigraphic units or geographic names. Examples of comparison charts and tables that are used to define the geohydrologic framework are included. Aquifers are defined in 11 hypothetical examples that characterize geohydrologic settings throughout the country. (Author 's abstract)

Open-File Report↗
USGS2023

Stratigraphic notes—Volume 1, 2022

This is the first volume in the U.S. Geological Survey (USGS) series of reports on stratigraphy entitled “Stratigraphic Notes,” which consists of short papers that highlight stratigraphic studies, changes in stratigraphic nomenclature, and explanations of stratigraphic names and concepts used on published geologic maps. “Stratigraphic Notes” is a long-term (multiyear), multivolume publication containing articles that address updates or revisions to stratigraphic nomenclature (and whose content ultimately will be incorporated by National Geologic Map Database personnel into Geolex, https://ngmdb.usgs.gov/Geolex/ ). We welcome papers for the “Stratigraphic Notes” series from geoscientists of the USGS, of State Geological Surveys, and from academicians. Papers can be submitted for publication in “Stratigraphic Notes” by contacting the USGS Geologic Names Committee ( gnc@usgs.gov ). As new “Stratigraphic Notes” volumes are published, links to the volumes will be posted at https://doi.org/10.3133/pp1879 . This first volume ("Stratigraphic notes—Volume 1, 2022") includes articles that provide guidance for those who wish to submit papers to “Stratigraphic Notes,” as well as information on how to make your manuscripts compliant for geologic names reviews and how to organize your paper’s content to facilitate inclusion of new or revised names in Geolex. This volume also includes some specific guidance on conducting geologic names reviews of geologic and hydrogeologic reports.

Professional Paper↗
USGS1989

Gazetteer of the Antarctic

This gazetteer lists antarctic names approved by the United States Board on Geographic Names and by the Secretary of the Interior. The Board is the interagency body created by law to standardize and promulgate geographic names for official purposes. As the official standard for names in Antarctica, the gazetteer assures accuracy and uniformity for the specialist and the general user alike. Unlike the last (1981) edition, now out of print, the book contains neither historical notes nor textual descriptions of features. The gazetteer contains names of features in Antarctica and the area extending northward to the Antarctic Convergence that have been approved by the Board as recently as mid-1989. It supersedes previous Board gazetteers for the area. For each geographic feature, the book contains the name, cross references if any, and latitude and longitude. Coverage corresponds to that of maps at the scale of 1:250,000 or larger for islands, coastal Antarctica, and mountains and ranges of the continent. Much of the interior of Antarctica, an ice plateau, has been mapped at a smaller scale and is nearly devoid of features and toponyms. All of the names are for natural features; scientific stations are not listed. For the names of submarine features, reference should be made to the Gazetteer of Undersea Features, U.S. Board on Geographic Names (1981).

Report↗