Geology ReportsSearch

SEARCH · Geology Reports

Results for “Hydrogeology Journal”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

244 records · Page 9Linked to original sources

Land application of drill waste: A scope analysis

Drilling fluid waste land application, a process where drilling wastes are spread and tilled into the land surface, has become common in some petroleum-producing states, however, the potential benefits and risks of this practice are not well studied. Drilling fluids can be water- or oil-based and can have high concentrations of total soluble salts and total petroleum hydrocarbons. Comprehensive chemical characterization of these fluids is not well documented in the literature, and the extent of land application is largely unknown. We hypothesized that the land application of drill waste would fluctuate over time due to economic factors. To begin to understand the extent of historical and potential future land application, we analyzed data from over 5,800 drilling fluid land application permits collected by the Oklahoma Corporation Commission for years 2000, 2005, 2010, and 2015–2020. During the years studied, drilling fluid wastes were applied to more than 250,000 acres in Oklahoma, with over 54,000 thousand barrels (Mbbl) of liquids and nearly 21,000 Mbbl of solids applied. Land application is widespread (occurring in 59/77 counties), however recent drilling activity, land availability, and the economics of transportation have created conditions favorable for land application specifically in the Anadarko Basin. Land application can co-occur with sensitive areas, such as important groundwater and surface-water drinking sources and agricultural fields used for subsistence or feed crop production. Our approach for quantifying the extent of land application, along with further chemical characterization studies, can aid operators and land managers who are considering this practice in assessing the associated benefits and risks.

Oklahoma

Impact of gas/liquid phase change of CO2 during injection for sequestration

CO 2 sequestration in deep saline formations is an effective and important process to control the rapid rise in CO 2 emissions. The process of injecting CO 2 requires reliable predictions of the stress in the formation and the fluid pressure distributions – particularly since monitoring of the CO 2 migration is difficult – to mitigate leakage, prevent induced seismicity, and analyze wellbore stability. A key aspect of CO 2 is the gas–liquid phase transition at the temperatures and pressures of relevance to leakage and sequestration, which has been recognized as being critical for accurate predictions but has been challenging to model without ad hoc empiricisms. This paper presents a robust multiphase thermodynamics-based poromechanics model to capture the complex phase transition behavior of CO 2 and predict the stress and pressure distribution under super- and sub- critical conditions during the injection process. A finite element implementation of the model is applied to analyze the behavior of a multiphase porous system with CO 2 as it displaces the fluid brine phase. We find that if CO 2 undergoes a phase transition in the geologic reservoir, the spatial variation of the density is significantly affected, and the migration mobility of CO 2 decreases in the reservoir. A key feature of our approach is that we do not a priori assume the location of the CO 2 gas/liquid interface – or even if it occurs at all – but rather, this is a prediction of the model, along with the spatial variation of the phase of CO 2 and the change of the saturation profile due to the phase change.

Journal of the Mechanics and Physics of Solids

Long-term communication of aftershock forecasts: The Canterbury earthquake sequence in New Zealand

On 14 February 2016, a magnitude (M)5.7 earthquake struck in Christchurch New Zealand (Aotearoa in the Maori language). The shaking caused damage to historic facades, power outages, cliff collapses, rock falls, and liquefaction but no reported injuries or fatalities. This Valentine’s Day earthquake was an aftershock in the Canterbury earthquake sequence (CES), which began on 4 September 2010 with the M7.1 Darfield Earthquake and included the destructive and fatal M6.2 Christchurch aftershock on 22 February 2011. This study, eight months after the Valentine’s Day earthquake and six years after the initiation of the CES, is the first to explore long-term aftershock forecast information and communication needs. The exploratory study also aimed to gather feedback on aftershock scenarios, an alternative form for communicating the forecast. The qualitative study involved workshops with emergency managers, public health officials, and members of the public in Christchurch. Key findings for long-term communication throughout an earthquake sequence include: 1. divergent earthquake experiences affect aftershock communication response and information needs; 2. understanding aftershock sequence behavior is foundational to sense-making when large aftershocks occur; 3. strategic earthquake sequence updates from the trusted science agency and local agencies could serve as important reminders for earthquake preparedness; 4. communication of aftershock forecast uncertainty could aid with both the credibility of the information and living with uncertainty, and 5. inclusion of impact information and preparedness advice into aftershock forecast scenarios could provide links to actionable information. The paper derives implications for research and practice of long-term communications during an aftershock sequence.

Christchurch

Remote sensing evapotranspiration in ensemble-based framework to enhance cascade routing and re-infiltration concept in integrated hydrological model applied to support decision making

Integrated hydrological models (IHMs) help characterize the complexity of surface–groundwater interactions. The cascade routing and re-infiltration (CRR) concept, recently applied to a MODFLOW 6 IHM, improved conceptualization and simulation of overland flow processes. The CRR controls the transfer of rejected infiltration and groundwater exfiltration from upslope areas to adjacent downslope areas where that water can be evaporated, re-infiltrated back to subsurface, or discharged to streams as direct runoff. The partitioning between these three components is controlled by uncertain parameters that must be estimated. Thus, by quantifying and reducing those uncertainties, next to uncertainties of the other model parameters (e.g. hydraulic and storage parameters), the reliability of the CRR is improved and the IHM is better suited for decision support modelling, the two key objectives of this work. To this end, the remotely sensed MODIS-ET product was incorporated into the calibration process for complementing traditional hydraulic head and streamflow observations. A total of approximately 150,000 observations guided the calibration of a 13-year MODFLOW 6 IHM simulation of the Sardon catchment (Spain) with daily stress periods. The model input uncertainty was represented by grid-cell-scale parameterization, yielding approximately 500,000 unknown input parameters to be conditioned. The calibration was carried out through an iterative ensemble smoother. Incorporating the MODIS-ET data improved the CRR implementation, and reduced uncertainties associated with other model parameters. Additionally, it significantly reduced the uncertainty associated with net recharge, a critical flux for water management that cannot be directly measured and rather is commonly estimated by IHM simulations.

Sardon catchment

New paleomagnetic constraints on the eruption timing, stratigraphy, and post-emplacement deformation of the Picture Gorge Basalt within the Columbia River Basalt Group

The Picture Gorge Basalt (PGB) is part of the Miocene Columbia River Basalt Group (CRBG). The PGB, which outcrops in eastern Oregon, is considered coincident in time with the voluminous Grande Ronde Basalt. New radiometric ages have expanded the age‐range of the PGB, suggesting it began erupting prior to the Steens Basalt to its south and continued until after cessation of the Grande Ronde Basalt eruptions, an interval of 1.5 Ma. However, the existing paleomagnetism of the PGB implies this eruption timeline is an overestimate. To reconcile the radiometric and paleomagnetic timescales for the PGB, we conducted a paleomagnetic study on sections of the PGB to construct a detailed, high‐quality magnetostratigraphy. Our data indicate the stratigraphically lowest lava flows in the PGB are of reversed polarity, revealing a new paleomagnetic transition with the PGB and a reversed (R)–normal (N)–reversed (R) sequence. This suggests one of two timeline possibilities for PGB volcanism: (a) eruptions began and during through CRBG polarity chrons R0–N0–R1, penecontemporaneous with Steens Basalt, or (b) eruptions began and persisted during CRBG polarity chrons R1–N1–R2. Our work supports a longer interval of PGB volcanism than was suggested by previous paleomagnetic data but is at odds with the suggestion that PGB eruptions lasted through the entire main CRBG. We favor a scenario wherein PGB eruptions begin with R0 and continue into the R1 paleomagnetic interval. The paleomagnetic results also record a ∼18° vertical‐axis rotation of east‐central Oregon after ∼16 Ma with respect to stable North America.

Oregon

Satellite tracking of Galapagos Petrel Pterodroma phaeopygia reveals distribution and movements during chick rearing

We tracked 19 adult Galapagos Petrels Pterodroma phaeopygia during the chick-rearing seasons in 2009 and 2010 (Santa Cruz Island [ n = 16] and Floreana Island [ n = 3]) in the Galápagos Islands, Ecuador. Eight petrels performed 27 complete foraging trips lasting 0.6 to 18.8 days. Short trips (3.2 ± 2.1 days; 785 km; max displacement 671 km) and long trips (10.8 ± 3.9 days; 2,856 km; max displacement 1,034 km) resulted in concentrated use of waters off southern and western Isabela Island and within the Galápagos Marine Reserve (GMR). Less concentrated time extended farther southwest and eastward, in that case toward mainland Ecuador. Total distance covered among all completed trips, independent of duration, was strongly correlated with trip duration ( R ² = 0.92), indicating a strategy favoring active searching and foraging over commuting. Petrels ranged across Ecuador's exclusive economic zone (EEZ), as well as other countries' (Colombia, Costa Rica, Perú), and waters beyond; they spent 46%, 27%, and 34% of their time in the GMR during short, long, and apparent (incomplete) trips, respectively. However, overlap with EEZs or marine protected areas (MPAs) does not necessarily confer protection, because commercial tuna fishing, including legal fishing historically permitted inside the GMR, occurs within these waters. Including all complete and incomplete trips, petrels spent 37% of their time in high-seas waters without formal protection, outside both MPAs and EEZs. While some hot spots overlapped Galápagos MPAs, the far-ranging nature of chick-provisioning petrels underscores the importance for this species of also having coordinated, multinational protection of the high seas.

Floreana Island, Galápagos Islands, Santa Cruz Isl

Competition between invasive round goby and native slimy sculpin in a coldwater laboratory setting

Slimy sculpin ( Cottus cognatus ) abundance has substantially declined in many regions of the Laurentian Great Lakes coincident with the arrival and range expansions of invasive round goby ( Neogobius melanostomus ). Previous studies have shown that round goby can outcompete native mottled sculpin ( C. bairdii ) for shelter and negatively affect native spoonhead sculpin ( C. ricei ) growth, but direct behavioral interactions of slimy sculpin and round goby have not been observed. We conducted a laboratory experiment in which a pair of slimy sculpin were placed in an aquarium that contained an artificial spawning shelter and one round goby (treatment, n = 10) or no other fish (control, n = 10) for at least 30 days at temperatures reflective of their potential offshore overlap. We measured slimy sculpin egg deposition, aggressive interactions, artificial shelter occupancy, growth, and survival. Slimy sculpin were less likely to occupy shelters and experienced increased intraspecific competition when a round goby was present. In contrast, round goby rarely chased slimy sculpin, slimy sculpin were more likely to chase round goby, and slimy sculpin growth, egg deposition, and survival were not significantly different between groups. Differences in density between treatments and the relative size of fish could confound our observations. However, the dominant slimy sculpin occupied the shelter at similar rates between experimental groups if the round goby was smaller. Our results indicate that larger round goby overlapping with slimy sculpin could affect slimy sculpin shelter and space use, but the Great Lakes environment may create more stress for slimy sculpin than we observed.

Lake Michigan, Lake Superior

Meet the people where they are: Assessing user needs for aftershock forecast products in El Salvador, Mexico and the United States

Aftershock forecasts can help communities reduce their seismic risk by conveying how many aftershocks can be expected following a large earthquake, and how the expected number of aftershocks and their corresponding ground shaking evolves over time and space. Prior work finds that graphical forecast products may communicate such information better than only text or numbers. To identify which visual products can serve multiple user groups, we held workshops with members of several professions, including emergency managers, engineers, critical infrastructure operators, public health specialists, science communicators, and more. We conducted these workshops in El Salvador, Mexico and the United States to understand which forecast products may be effective across different countries. In these workshops, users performed small-group activities to elicit the types of aftershock forecast information that would support decisions in their respective roles and how this information would optimally be displayed. Maps of shaking hazards were frequently requested across all professions and countries, even for dissimilar forecast uses. The design of these maps, and other product needs, were differentiated by profession, country and other factors. Other forecast products, including those showing forecasts about the magnitudes and time periods of future aftershocks, also served a variety of users, but for different types of decisions. We found a greater variation in user needs by profession than by country, and that user needs also vary with time, communication channel and other contextual factors. We discuss practical implications for user-centered visual communication of operational aftershock forecasts.

International Journal for Disaster Risk Reduction

Seismic characteristics of the April 2024 eruption of Ruang Volcano, North Sulawesi, Indonesia

The two most recent eruptions of Ruang volcano, in 2002 and 2024, have been large (VEI 4) with very short precursory periods, 3 and 6 days, respectively. Background seismicity at Ruang volcano is generally low with 0–2 volcano-tectonic (VT) earthquakes per day. The 2024 eruptions were preceded by a notable increase in VT earthquakes from 11 to 15 April with a rapid escalation from 16 to 17 April in the form of increased VT swarms, and the appearance of low frequency earthquakes and short bursts of VT drumbeats shortly before the eruption. Similar VT seismic unrest was recorded in March 2015, May 2016, and April 2022, although none of these episodes culminated in an eruption. A comparison of seismic energy release between April 2022 and April 2024 shows distinct differences. In 2024, cumulative seismic energy reached its peak within 5 days, just before the onset of eruption on 17 April. In contrast, during the 2022-episode, energy release followed a more gradual increase over 8 days peaking on 16 April, then declining gradually without leading to eruption. Notably, low frequency (LF) and drumbeat earthquakes were absent in non-eruptive unrest episodes. The transition to proximal LFs in 2024 likely signals pressure fluctuations, intensified magma degassing, and conduit formation, acting as an important precursor to eruption. Additionally, the occurrence of short bursts of drumbeat seismicity likely reflects the onset of the shallow magma ascent and was an important short-term precursor to the eruption. Finally, we examine the potential influence of regional tectonic earthquakes on the escalation of precursory unrest in 2024.

North Sulawesi, Ruang volcano

Gas emissions from the Sulphur Bank Mercury Mine hydrothermal system, Clear Lake volcanic field, California

The Sulphur Bank Mercury Mine (SBMM) hydrothermal system offers insights into active degassing processes in the Clear Lake volcanic field (CLVF), a high-threat region based on its record of Holocene eruptions and proximity to populated areas. Here we present chemical and isotopic analyses of gas samples collected between 2015 and 2023, along with the first comprehensive CO 2 flux survey of the SBMM area conducted in 2023. Sampled gases are CO 2 - and CH 4 -rich (≥84 and 6 mol% in dry gas, respectively) with high mantle-derived helium contributions ( 3 He/ 4 He = 6.54–7.86 R C /R A ). Carbon isotopic compositions of CO 2 (δ 13 C = −10.0 to −9.5 ‰) and CH 4 (δ 13 C = −35.8 ‰) indicate mixed sources, with significant contributions from metamorphism of organic-rich Franciscan Complex rocks hosting the hydrothermal system. Modeling of gas compositions shows that scrubbing by interaction with air-saturated groundwater strongly influences observed compositional variability. From our CO₂ flux measurements, we estimate the deeply derived CO 2 emission rate from the SBMM hydrothermal area (0.2 km 2 ) at 240 t d −1 , comparable to many quiescently degassing volcanoes worldwide. We also provide a first-order estimate of CH 4 emissions at approximately 0.5 t d −1 . Our findings establish crucial baseline data for future volcanic monitoring efforts, enhancing detection capabilities for potential changes in this active hydrothermal system. This work contributes to the broader understanding of volatile contributions from volcanic and metamorphic sources to the global carbon budget, while highlighting the strong influence of bedrock geology on gas compositions in the CLVF.

California

Distinguishing natural from mining-related metal sources by including streambank groundwater data in a stream mass loading study

Distinguishing stream metal loading caused by mine features from that caused by natural background sources remains challenging, yet this distinction is essential for making effective remedial decisions at many legacy mine sites. We combine a stream tracer injection and synoptic sampling study with data from shallow near-stream groundwater wells to estimate left-bank versus right-bank metal loading contributions at the 100-m spatial scale. The study was performed in the East Mancos River, a mountain headwater stream in Colorado, USA. The dominant source of elevated stream metal concentrations could be either groundwater infiltration through right-bank Doyle Mine waste piles or natural acid rock drainage from hydrothermally altered bedrock located mainly on the left bank. For the five metals of concern (Cu, Al, Zn, Cd, and Mn), we find that 15 % of the load contributed by diffuse groundwater inputs in the section potentially influenced by Doyle mine waste originates from the right bank. This right-bank potential mine contribution equates to only 3 % of the total watershed instream load for these metals. Furthermore, apparent 3 H/ 3 He groundwater ages in segments contributing most of the right-bank metal loading are sufficiently old (9–12 yr) to suggest that infiltration through the waste piles, located only 140–180 m from the stream, is unlikely. Estimated potential Doyle mine loading contributions can therefore be considered maximum values. Study results thus indicate that Doyle mine waste piles are a minor source of metal loading under low-flow conditions, and streambank groundwater data can provide valuable additional information in stream mass loading studies.

Colorado

Re-examining the growing degree day minimum for grass carp spawning initiation in Lake Erie: Have we missed the mark?

Understanding the timing of life history processes of invasive fish species, such as adult aggregations during spawning, allows natural resource managers to optimize targeted population control efforts. Temperature-based estimates of the timing of spawning initiation for grass carp ( Ctenopharyngodon idella ) exist from its native range, but have not previously been developed for grass carp reproduction in its invaded range in the Laurentian Great Lakes of North America. We accounted for differences among methods across studies and calculated cumulative growing degree days (GDD) for the dates of grass carp egg capture in Lake Erie tributaries (Sandusky, Maumee, and Huron rivers) during 2015–2024 and compared these values to the existing GDD base 15°C requirement estimate from the native range (633 GDD–15°C). The earliest egg detection in Lake Erie (Sandusky River) was 19 GDD–15°C or 361 GDD–5°C (latest egg detection was 2285 GDD–5°C from the Sandusky River), indicating that spawning was initiated up to 25 days earlier than would be predicted by the native range GDD. Moreover, spawning in Lake Erie tributaries occurred earlier than predicted for 58% of spawning events examined based on the native range GDD. The GDD values for spawning initiation in Lake Erie tributaries can be used to refine the timing of control efforts targeting pre-spawn and spawning adult fish, inform the timing of egg sampling, and provide linkages to existing early life stage models to infer the length of the growing season available for age-0 fish to reassess tributary suitability.

Lake Erie, Maumee, River, Sandusky river

VIPER site analysis

We needed to evaluate available orbital data of NASA’s Volatiles Investigating Polar Exploration Rover (VIPER) mission area in order to derive a variety of maps to help the science team identify scientifically interesting places for the rover to visit and to provide scientific context for our mission. Some of these maps also fulfilled engineering and mission design needs to enable safe and efficient landing and roving. We incorporated data from the Lunar Reconnaissance Orbiter Camera, the Lunar Orbital Laser Altimeter, the Mini-RF instrument, the Chandrayaan-2 Orbital High Resolution Camera, the Korean Pathfinder Lunar Orbiter’s Shadowcam, the Kaguya Spectral Profiler and Multiband Imager, and the Chandrayaan-1 Moon Mineralogy Mapper. We used a variety of techniques to build these maps, including stereogrammetry, shape-from-shading, ice stability depth and surface temperature calculations, and the horizon method for solar illumination and direct-to-Earth communications maps. Altogether, these maps allowed us to survey for boulders, evaluate features in permanently shadowed regions that VIPER might explore, provide mineralogic context for what VIPER’s instruments may learn, estimate the ages and radar properties of craters in the VIPER mission area, and evaluate the potential for gravity traverses with the rover. These data and techniques provided a rich set of information from which both the VIPER science team and engineering teams were able to draw in order to plan a safe landing and to plan a VIPER surface mission that will be both scientifically valuable and robust from an operational perspective.

The Planetary Science Journal

Detrital zircons and the magmatic history of Viti Levu, Fiji

We integrate the existing detrital zircon data from multiple modern river sediment samples on Viti Levu, Fiji, with the most current available geological and topographic mapping of the respective river drainage basins to compare detrital populations with potential bedrock sources. The temporal and spatial variations in zircon geochemistry supplement what is known from igneous rocks and confirm the petrological differences between plutonic and volcanic rocks from the Eocene to early Oligocene (Yavuna age, >30 Ma), middle Oligocene to middle Miocene (Wainimala age, 30–12.5 Ma), late Miocene (Colo age, 12.5–6.5 Ma) and latest Miocene (Namosi age, 6.5–5 Ma). The >30 Ma Yavuna-age zircons are restricted to areas that drain the previously mapped Yavuna Group. The 30–12.5 Ma zircons are found across central Viti Levu from west to east, and the 30–15 Ma zircons have distinctively low U/Yb and high Dy/Yb ratios. They are the best radiometric evidence of widespread early to middle Miocene arc magmatism in Fiji that was relatively U-poor. Peak deconvolution of the Colo age zircons from individual basins suggests the following ages for undated or poorly dated plutons from central Viti Levu. The large Mavuvu pluton is probably composed of multiple intrusions in the 12–10 Ma range, the Waiqa pluton is probably ca 10 Ma, and the Noikoro pluton is probably ca 9 Ma. There are zircons from unknown plutonic or volcanic sources between 8 and 7 Ma in western Viti Levu that have distinct Eu/Eu* ratios. We attribute the highest U/Yb ratios in some Colo age zircons to crustal anatexis. Namosi-age zircons are abundant in the Medrausucu Group and can be found scattered across Viti Levu.

Viti Levu

Identification of representative earthquakes for probabilistic tsunami hazard analysis (PTHA) using earthquake rupture forecasts and machine learning

As probabilistic tsunami hazard analysis (PTHA) focuses more on assessments for localized, populous regions, techniques are needed to identify a subsample of representative earthquake ruptures to make the computational requirements for producing high-resolution hazard maps tractable. Moreover, the greatest epistemic uncertainty in seismic PTHA is related to source characterization, which is often poorly defined and subjective. We address these two salient issues by applying streamlined earthquake rupture forecasts (ERFs), based on combinatorial optimization methods, to an unsupervised machine learning workflow for identifying representative ruptures. ERFs determine the optimal distribution of a millennia-scale sample of earthquakes by inverting the observed slip rate on major faults. We use two previously developed combinatorial optimization ERFs, integer programming and greedy sequential, to produce the optimal location of ruptures with seismic moments sampled from a regional Gutenberg–Richter magnitude–frequency distribution. These ruptures in turn are used to calculate peak nearshore tsunami amplitude, using computationally efficient tsunami Green's functions. An unsupervised machine learning workflow is then used to identify a small subsample of the earthquakes input to ERFs for onshore PTHA analysis. We eliminate epistemic uncertainty related to source distribution under traditional PTHA analysis; in its place, a quantifiable, less subjective and generally smaller uncertainty related to the input to ERFs is included. The Nankai subduction zone is used as a test case, where previous ERFs have been conducted. Results indicate that the locations of representative earthquakes are sensitive to choice of magnitude–area relation and to whether a minimum cumulative stress objective is imposed on the fault. In general, incorporating ERFs into PTHA provide a physically self-consistent method to incorporate fault slip information in determining representative earthquakes for onshore PTHA, eliminating a major source of epistemic uncertainty.

Nankai subduction zone

Rapid seismic and infrasound assessment of large landslides: A case study from Denali National Park and Preserve (Alaska)

Large, rapid landslides are a global hazard that can occur in remote, mountainous areas. Eyewitness reports of landslides and satellite imagery can often be limited or delayed, particularly during inclement weather. However, landslide-generated seismic and infrasound (low-frequency atmospheric sound) waves can be remotely detected in near real-time. This information can significantly expedite characterization and possible landslide response activities. Here, we highlight these capabilities using a > 4 million m³ ice–rock avalanche in Denali National Park and Preserve (Alaska). This event was detected via a landslide-specific seismic location and volume estimation algorithm deployed in Alaska, and — notably — by standard earthquake monitoring systems. Following rapid detection of this event, we combined its seismic and infrasound dataset with optical, synthetic aperture radar, and oblique aerial imagery, multitemporal digital elevation models, and a numerical flow model to reconstruct its failure timeline and dynamics. We apply array processing to infrasound signals traveling > 250 km and find that two precursory events occurred minutes prior to the main failure. We use long-period seismic signals to infer the force exerted by the landslide on the Earth and constrain the rheological parameters of our numerical flow simulation with this result and deposit morphology. The main failure produced a steeply-dipping impulsive initial downward force and reached speeds exceeding 60 m/s. This impulsive force generated relatively strong seismic body waves, which contributed to the earthquake system detection. This large, remote Alaska landslide underscores the key value of seismic and infrasound analysis for rapid landslide assessment and motivates efforts to further operationalize these approaches.

Alaska

Upper Triassic igneous rocks of the southern Kenai Peninsula, Alaska – Prelude to Early Jurassic subduction along the western Wrangellia composite terrane margin

New U–Pb zircon geochronology identifies a latest Triassic (ca 214–201 Ma) igneous suite of tuff, hypabyssal dikes, and a pluton on the southern Kenai Peninsula, Alaska. The igneous suite was emplaced within Upper Triassic sedimentary rocks along the southern margin of Western Wrangellia, the western-most fragment of the Wrangellia composite terrane. The igneous rocks range from mafic (50.6% SiO 2 ) to felsic (78.3% SiO 2 ), characteristically have less than 1.55% K 2 O, and generally have low trace element abundances. The tonalitic and trondhjemitic magmas were largely sourced in mafic-rich lower crust and incompletely assimilated quartz and other mineral xenocrysts are common. Fractionation involving plagioclase and amphibole is indicated for some magmas and composite intrusions and igneous xenoliths indicate magma mixing was possible. Paleozoic and Precambrian inherited zircons and initial 87 Sr/ 86 Sr (0.704103–0.705609) and 143 Nd/ 144 Nd (0.512396–0.512777) ratios indicate that the Western Wrangellia crustal sources are heterogeneous and contain sialic components. The latest Triassic magmatism reflects processes that preceded Early Jurassic subduction along the Wrangellia composite terrane and Pacific Ocean plate boundary. These processes involved heating and melting of mantle lithosphere and lower crust as mantle instabilities accompanied the breaking of the plate boundary linkages. The Late Triassic transition to subduction along the Wrangellia composite terrane margin coincided with the transition to subduction cessation in the Late Triassic arcs of the western Intermontane terranes of Canada. The shift to subduction along the outboard Wrangellia composite terrane margin marks the beginning of the Pacific Ocean–Cordillera plate interactions that came to dominate the tectonic evolution of the northern Cordillera from the Early Jurassic to today.

Alaska

Deep subsurface organic-rich shale supports abundant, diverse, and novel fungi

As Earth’s principal reservoir of organic carbon and microbial biomass, the deep subsurface hosts microorganisms capable of mobilizing this once-sequestered carbon. Contrary to standard assumptions of eukaryotic scarcity, this study documents abundant fungal communities, ranging from 4.2 × 10 3 to 6.8 × 10 3 fungal cells mL −1 , across a methane-producing organic-rich shale 247–556 meters below the surface. Although fungal:bacterial cell ratios ranged from 1:7028 to 1:713, application of biomass conversion factors developed for oceanic systems yielded a median fungal:bacterial biomass ratio of 1:4.7. 16S rRNA gene amplicons revealed bacterial and archaeal communities mirroring those found in well-characterized extremophilic, carbon-degrading environments, while sequencing of 18S rRNA gene and ITS rRNA spacer amplicons collectively identified a eukaryotic hotspot with 689 fungal OTUs across six phyla. The dominant fungal classes, Agaricomycetes and Dothideomycetes, are well-established degraders of recalcitrant carbon compounds at the surface, suggesting they may similarly contribute to organic matter degradation and ecosystem maintenance in the subsurface. Cultivation and isolation efforts yielded 205 fungal strains, including 13 candidate novel taxa, underscoring the deep subsurface as an underexplored eukaryotic habitat. Stable carbon isotopes indicate methane is predominantly generated via microbial conversion of the fossil carbon, while water isotopes suggest in situ geochemical conditions have been relatively stable since the Late Pleistocene, with subglacial recharge as a plausible mechanism for microbial introduction. Collectively, these findings suggest that fungi are underrecognized contributors to organic matter transformation and functional diversity in the deep biosphere, revealing a critical gap in our understanding of deep subsurface ecosystem processes.

Indiana, Michigan, Ohio