Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Geochemistry Geophysics Geosystems”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9Linked to original sources
USGS2024

Hydrothermal plume fallout, mass wasting, and volcanic eruptions contribute to sediments at Loki’s Castle vent field, Mohns Ridge

Sediments surrounding hydrothermal vents are important transition spaces between hydrothermal and pelagic environments. These sediments accumulate through diverse processes that include water column plume fallout, volcanic ash deposition, and mass wasting of hydrothermal chimneys and mounds superimposed upon background sedimentation which may originate from pelagic, terrestrial, and volcanic sources. In addition to being a sink for elements discharged from hydrothermal vents, elements may also be scavenged from seawater onto oxidized hydrothermal material. Preservation of these hydrothermal sediments may occur depending on the extent of oxidative and/or reductive dissolution processes after burial. Sediments remaining adjacent to active venting may also be hydrothermally altered after emplacement. To better understand these processes, here we evaluate sediment push cores collected from the Loki's Castle vent field at the intersection of the slow-ultraslow spreading Mohns and Knipovich mid-ocean ridges. All samples were collected within ∼225 m of current high-temperature (299–316°C) “black smoker” fluid discharge. These sediment cores are highly heterogeneous and lack stratigraphic correlation, even for samples taken within meters of each other. Most sediment cores are dominated by either pelagic sediments or mass wasted hydrothermal material, with hydrothermal plume fallout contributing a low proportion of material, and only a single volcanic ash layer occurring in one of the 13 cores. Dominant hydrothermal minerals found include talc, goethite, pyrite, pyrrhotite, and sphalerite. We find that even after several thousand years, most mass wasted hydrothermal material remains minimally altered, with sedimentation rates indistinguishable from background rates within several hundred meters of the hydrothermal vent source.

Geochemistry, Geophysics, Geosystems↗
USGS2023

Hydration state and rheologic stratification of the lithospheric mantle beneath the North Anatolian Fault, Turkey

We present constraints on the hydration state and rheology of the lithospheric mantle beneath the North Anatolian fault zone (NAFZ). Peridotite xenoliths from the Biyikali and Çorlu volcanic centers record deformational microstructures consistent with shearing in a lithosphere-scale transcurrent fault system. Analysis by Fourier transform infrared spectroscopy indicates that nominally anhydrous phases retain some OH − , but bulk rock concentrations are generally restricted to <50 ppm H 2 O by weight. From the rock microstructure, we determined differential stress magnitude and active deformation mechanism(s); combined with estimates of hydration state, we constrained the rheology. Recrystallized grain size piezometry shows that the mantle beneath the NAFZ sustained differential stresses of 10–20 MPa, largely independent of depth. The dominant deformation mechanism(s) change with depth; xenoliths extracted from shallower depths record evidence for grain size-sensitive creep possibly in the presence of melt. At intermediate depths, both dislocation creep and grain size-sensitive mechanisms were active, and we did not observe evidence for deformation in the presence of melt. The deepest samples were dominated by dislocation creep. The strong temperature sensitivity of creep mechanisms, combined with the low variability in differential stress, contributes to a stratified viscosity profile ranging from 10 18 Pa s for the deepest samples to >10 22 Pa s at shallower depths (assuming a melt-free rheology). Although difficult to quantify from the rock record, melt likely reduced the viscosity of the shallow lithospheric mantle. Vertical stratification in viscosity beneath the NAFZ, the result of melt-present deformation and/or transitions in the dominant deformation mechanism, has important consequences for the seismic cycle of strike-slip fault systems.

North Anatolian fault zone↗
USGS2024

Chemistry, growth, and fate of the unique, short-lived (2019–2020) water lake at the summit of Kīlauea Volcano, Hawaii

Less than a year after the 2018 Kīlauea caldera collapse and eruption, water appeared in newly deepened Halemaʻumaʻu crater. The lake—unprecedented in the written record—grew to a depth of ∼50 m before lava from the December 2020 eruption boiled it away. Surface water heightened concerns of potential phreatic or phreatomagmatic explosions but also offered a new means of possibly identifying eruption precursors. The U.S. Geological Survey Hawaiian Volcano Observatory (HVO) monitored the lake via direct visual observation, webcams, thermal imaging, colorimetry, and laser rangefinders. HVO also employed uncrewed aircraft systems to sample the water and measure near-lake gas composition. The lake's δD and δ 18 O indicate a groundwater source with substantial evaporation. The initial sample had a salinity (total dissolved solids concentration) of 71,000 mg/L and was rich in sulfate (∼53,000 mg/L), iron (∼500 mg/L), and magnesium (∼10,000 mg/L). Subsequent samples were slightly more dilute. The water's pH (∼4), δ 34 S (+4.3‰), and surface temperatures (up to 85°C) suggest, rather than significant scrubbing of magmatic volatiles, leaching of basalt and reactions with sulfate minerals resulted in high concentrations of sulfate and other solutes. Thermodynamic modeling and precipitate mineralogy indicate that water composition was controlled by iron oxidation and sulfate dissolution. Although the lake exhibited no detectable precursors before the next eruption, and phreatic or phreatomagmatic explosions did not materialize, our multi-parameter approach to monitoring yielded an enhanced understanding of the hydrologic, geologic, and magmatic conditions that led to the formation of the unique and short-lived lake.

Hawaii↗
USGS2024

Clumped isotopes record a glacial-interglacial shift in seasonality of soil carbonate accumulation in the San Luis Valley, southern Rocky Mountains, USA

Clumped isotope paleothermometry using pedogenic carbonates is a powerful tool for investigating past climate changes. However, location-specific seasonal patterns of precipitation and soil moisture cause systematic biases in the temperatures they record, hampering comparison of data across large areas or differing climate states. To account for biases, more systematic studies of carbonate forming processes are needed. We measured modern soil temperatures within the San Luis Valley of the Rocky Mountains and compared them to paleotemperatures determined using clumped isotopes. For Holocene-age samples, clumped isotope results indicate carbonate accumulated at a range of temperatures with site averages similar to the annual mean. Paleotemperatures for late Pleistocene-age samples (ranging 19–72 ka in age) yielded site averages only 2°C lower, despite evidence that annual temperatures during glacial periods were 5–9°C colder than modern. We use a 1D numerical model of soil physics to support the idea that differences in hydrologic conditions in interglacial versus glacial periods promote differences in the seasonal distribution of soil carbonate accumulation. Model simulations of modern (Holocene) conditions suggest that soil drying under low soil p CO 2 favors year-round carbonate accumulation in this region but peaking during post-monsoon soil drying. During a “glacial” simulation with lowered temperatures and added snowpack, more carbonate accumulation shifted to the summer season. These experiments show that changing hydrologic regimes could change the seasonality of carbonate accumulation, which in this study blunts the use of clumped isotopes to quantify glacial-interglacial temperature changes. This highlights the importance of understanding seasonal biases of climate proxies for accurate paleoenvironmental reconstruction.

Colorado, new Mexico↗
USGS2024

Mafic alkaline magmatism and rare earth element mineralization in the Mojave Desert, California: The Bobcat Hills connection to Mountain Pass

Occurrences of alkaline and carbonatite rocks with high concentrations of rare earth elements (REE) are a defining feature of Precambrian geology in the Mojave Desert of southeastern California. The most economically important occurrence is the carbonatite stock at Mountain Pass, which constitutes the largest REE deposit in the United States. A central scientific goal is to understand the genesis of the carbonatite ore body in the context of widespread REE-rich igneous activity. A swarm of mafic alkaline (shonkinite) dikes has been mapped and sampled at Bobcat Hills, 65 km southeast of the Mountain Pass mine. Whole-rock geochemistry and zircon geochronology demonstrate a clear affinity to the ca. 1.4 Ga Mountain Pass intrusive system. Bobcat Hills dikes have comparably high REE concentrations (La ∼1,000× chondritic) and an error-weighted mean 207 Pb/ 206 Pb zircon crystallization age of 1,426 ± 2 Ma (2 σ ). Unlike the alkaline intrusions at Mountain Pass, which have abundant inherited zircon from Paleoproterozoic basement rocks and crustally influenced oxygen isotope compositions (δ 18 O zircon = 6.5–7.5‰), the Bobcat Hills dikes lack any evidence of crustal assimilation and have oxygen isotope values that overlap a mantle range (Bobcat Hills average δ 18 O zircon = 5.6 ± 0.3‰). The dikes were a high-temperature, early center of mafic alkaline magmatism in the Mojave Desert that serve as a snapshot of melt generation from a spatially extensive, metasomatized mantle source. We propose that modification of the crust over many tens of Myr at Mountain Pass created an environment that favored crustal assimilation and enabled ascent of late-stage, REE-rich carbonatite magmas.

California↗
USGS2024

A comprehensive assessment of submarine landslides and mass wasting processes offshore southern California

It is critical to characterize submarine landslide hazards near dense coastal populations, especially in areas with active faults, which can trigger slope failure, subsequent tsunamis, and damage seabed infrastructure during earthquake shaking. Offshore southern California, numerous marine geophysical surveys have been conducted over the past decade, and high-resolution bathymetric and subsurface data now cover about 60 percent of the total region between Point Conception and the United States-Mexico border from the California coast out to the base of Patton Escarpment ∼200 km offshore. In a comprehensive compilation and interpretive mapping effort, we find evidence of seafloor failure throughout offshore southern California with nearly 1,500 submarine landslide-related features, including 63 discrete slide deposits with debris and >1,400 slide-related scarps. In our analysis, we highlight new mapping of submarine landslides in Catalina Basin, the Del Mar slide, the San Gabriel slide complex, and the 232 km 2 San Nicolas slide, the largest area of any known submarine landslide mass offshore southern California. Analysis of the spatial distribution of submarine landslide features suggests that most mapped slide features are located relatively near coastal sediment sources, particularly during sea-level lowstand conditions, which underscores the importance of sediment supply and sediment accumulation on low-gradient slopes as failure preconditioning processes. Tectonically driven uplift at shelf edges and along basin flanks is another key preconditioning factor, and our results also suggest that earthquakes along active faults trigger mass wasting, especially for repeated, small-scale failures on tectonically steepened slopes.

California↗
USGS2024

Uranium redox and deposition transitions embedded in deep-time geochemical models and mineral chemistry networks

Uranium (U) is an important global energy resource and a redox sensitive trace element that reflects changing environmental conditions and geochemical cycling. The redox evolution of U mineral chemistry can be interrogated to understand the formation and distribution of U deposits and the redox processes involved in U geochemistry throughout Earth history. In this study, geochemical modeling using thermodynamic data, and mineral chemistry network analysis are used to investigate U geochemistry and deposition through time. The number of U 6+ mineral localities surpasses the number of U 4+ mineral localities in the Paleoproterozoic. Moreover, the number of sedimentary U 6+ mineral localities increases earlier in the Phanerozoic than the number of U 4+ sedimentary mineral localities, likely due to the necessity of sufficient sedimentary organic matter to reduce U 6+ –U 4+ . Indeed, modeling calculations indicate that increased oxidative weathering due to surface oxygenation limited U 4+ uraninite (UO 2 ) formation from weathered granite and basalt. Louvain network community detection shows that U 6+ forms minerals with many more shared elements and redox states than U 4+ . The range of weighted Mineral Element Electronegativity Coefficient of Variation (wMEE CV ) values of U 6+ minerals increases through time, particularly during the Phanerozoic. Conversely, the range of wMEE CV values of U 4+ minerals is consistent through time due to the relative abundance of uraninite, coffinite, and brannerite. The late oxidation and formation of U 6+ minerals compared to S 6+ minerals illustrates the importance of the development of land plants, organic matter deposition, and redox-controlled U deposition from ground water in continental sediments during this time-period.

Geochemistry, Geophysics, Geosystems↗
USGS2024

Versatile modeling of deformation (VMOD) inversion framework: Application to 20 years of observations at Westdahl Volcano and Fisher Caldera, Alaska, US

We developed an open source, extensible Python-based framework, that we call the Versatile Modeling of Deformation (VMOD), for forward and inverse modeling of crustal deformation sources. VMOD abstracts from specific source model implementations, data types and inversion methods. We implement the most common geodetic source models which can be combined to model and analyze multi-source deformation. VMOD supports Global Navigation Satellite System (GNSS), InSAR, electronic distance measurement, Leveling and tilt data. To infer source characteristics from observations, VMOD implements non-linear least squares and Markov Chain Monte-Carlo Bayesian inversions, including joint inversions using different sources of data. VMOD's structure allows for easy integration of new geodetic models, data types, and inversion strategies. We benchmark the forward models against other published results and the inversion approaches against other implementations. We apply VMOD to analyze deformation at Unimak Island, Alaska, observed with continuous and campaign GNSS, and ascending and descending InSAR time series generated from Sentinel-1 satellite radar acquisitions. These data show an inflation pattern at Westdahl volcano and subsidence at Fisher Caldera. We use VMOD to test a range of source models by jointly inverting the GNSS and InSAR data sets. Our final model simultaneously constrains the parameters of two sources. Our results reveal a depressurizing spheroid under Fisher Caldera ∼4–6 km deep, contracting at a rate of ∼2–3 Mm 3 /yr, and a pressurizing spherical source underneath Westdahl volcano ∼6–8 km deep, inflating at ∼5 Mm 3 /yr. This and past applications of VMOD to volcanic unrest benefit from an extensible framework which supports jointly inversions of data sets for parameters of easily composable multi-source models.

Alaska↗
USGS2024

Iron oxyhydroxide-rich hydrothermal deposits at the high-temperature Fåvne vent field, Mohns Ridge

The recently discovered Fåvne vent field, located at 3,040 m depth on the slow-spreading Mohns mid-ocean ridge between Greenland and Norway, is a high-temperature (≥250°C) vent field that is characterized by Fe oxyhydroxide-rich and S-poor chimneys and mounds. The vent field is located on both the hanging wall and footwall of a normal fault with a ∼1.5 km throw that forms the western edge of the ∼20 km wide ridge axial valley. Data collected during exploration of the site using a remotely operated vehicle as well as mineralogical and geochemical analyses of rock samples and sediments are used to characterize the geological setting of the vent field and composition of the hydrothermal deposits. The chimney walls are highly porous and lack defined chalcopyrite lined conduits, typical of high-temperature chimneys. Overall, abundant Fe oxyhydroxide precipitation at high-temperature vents at Fåvne reflects an excess of Fe over reduced S in the fluid, leading to precipitation of Fe oxide and oxyhydroxide minerals at high to moderate temperature vents (>100°C), and as microbially mediated and abiotic precipitation of Fe oxyhydroxide minerals at low-temperature diffuse vents (<100°C). The mounds and chimneys exhibit low base metal and reduced S concentrations relative to globally averaged seafloor deposits and suggest subseafloor mixing of hydrothermal fluid with seawater, causing metal sulfide precipitation. Cobalt enrichment at Fåvne may reflect a subsurface influence of an ultramafic substrate on circulating fluids, although ultramafic rocks are absent on the seafloor and no other elements typical of ultramafic deposits are present.

Geochemistry, Geophysics, Geosystems↗
USGS2025

How did westward volcaniclastic deposits accumulate in the deep sea following the January 2022 eruption of Hunga Volcano ?

Most volcanic eruptions on Earth take place below the ocean surface and remain largely unobserved. Reconstruction of past submerged eruptions has thus primarily been based on the study of seafloor deposits. Rarely before the 15 January 2022 eruption of Hunga volcano (Kingdom of Tonga) have we been able to categorically link deep-sea deposits to a specific volcanic source. This eruption was the largest in the modern satellite era, producing a 58-km-tall plume, a 20-m high tsunami, and a pressure wave that propagated around the world. The eruption induced the fastest submarine density currents ever measured, which destroyed submarine telecommunication cables and traveled at least 85 km to the west to the neighboring Lau Basin. Here we report findings from a series of remotely operated vehicle dives conducted 4 months after the eruption along the Eastern Lau Spreading Center-Valu Fa Ridge. Hunga-sourced volcaniclastic deposits 7–150 cm in thickness were found at nine sites, and collected. Study of the internal structure, grain size, componentry, glass chemistry, and microfossil assemblages of the cores show that these deposits are the distal portions of at least two ∼100-km-runout submarine density currents. We identify distinct physical characteristics of entrained microfossils that demonstrate the dynamics and pathways of the density currents. Microfossil evidence suggests that even the distal parts of the currents were erosive, remobilizing microfossil-concentrated sediments across the Lau Basin. Remobilization by volcaniclastic submarine density currents may thus play a greater role in carbon transport into deep sea basins than previously thought.

Hunga volcano↗
USGS2024

Zircon constraints on the eruptive sequence and magma evolution of rhyolites at South Sister volcano, Oregon

We present 230 Th- 238 U crystallization ages and trace element compositions for zircons spanning the late Pleistocene to Holocene rhyolite eruptive record at South Sister volcano in the central Oregon Cascade Range. Most zircon ages are between 100 and 20 ka, with very few in secular equilibrium (>350 ka). The weighted mean of zircon ages for the two oldest South Sister rhyolites, 31.5 ± 2.1 and 39.1 ± 2.4 ka, are significantly younger than the associated 40 Ar/ 39 Ar ages, 47.4 ± 9.7 and 51.4 ± 9.7 ka. We propose that these 40 Ar/ 39 Ar dates, performed on plagioclase separates, are compromised by a subtle amount of excess Ar and therefore the younger weighted mean zircon ages yield more reliable eruption ages. These results imply that the interval of rhyolite eruption at South Sister during the late Pleistocene was both shorter and more productive than previously thought and that eruption at South Sister initiated after Middle Sister. Compositionally, zircons from the Pleistocene rhyolites are broadly similar and show down-temperature zircon and plagioclase crystallization trends. However, we argue that destabilized amphibole and titanite in a common mush also exert leverage on the Pleistocene zircon trace element compositions. Divergence in the Eu/Eu* ratio between the Pleistocene and Holocene lavas implies chemically distinct magma reservoirs originating from the Pleistocene rhyolite eruptive sequence and the Holocene eruptive sequence. This work suggests a higher flux of rhyolite volcanism than previously thought and characterizes magmatic storage distinctions between the Pleistocene and Holocene rhyolites, aiding in the assessment of future eruptive hazards at South Sister volcano.

Oregon↗
USGS2024

Radiogenic strontium- and uranium-isotope tracers of water-rock interactions and hydrothermal flow in the Upper Geyser Basin, Yellowstone Plateau Volcanic Field, USA

Natural radiogenic isotopes (primarily 87 Sr/ 86 Sr) from hot springs in the Upper Geyser Basin of the Yellowstone Plateau volcanic field and associated rocks were used to evaluate groundwater flow patterns, water-rock reactions, and the extent of mixing between various groundwater sources. Thermal waters have very low uranium concentrations and 234 U/ 238 U activity ratios near 1.0, which limit their utility as tracers in this reducing setting. Thermal waters have higher Sr concentrations (<22 ng/g) and a wide range of 87 Sr/ 86 Sr values that vary both temporally at individual discharge sites and between adjacent springs, indicating that conduits tap different subsurface reservoirs to varying degrees. Sr from local rhyolites have 87 Sr/ 86 Sr compositions that bound the range of values observed in groundwater throughout the basin. Non-boiling springs on the west flank of the basin discharge water with low 87 Sr/ 86 Sr consistent with flow through young volcanic rocks exposed at the surface. Boiling springs in the central basin have higher 87 Sr/ 86 Sr values reflecting interactions with older, more radiogenic volcanic rocks. Variability in upwelling thermal waters requires mixing with a low 87 Sr/ 86 Sr component derived from young lava or glacial sediments, or more likely, from deeper sources of hot groundwater circulating through buried Lava Creek Tuff having intermediate 87 Sr/ 86 Sr. Isotope data constrain basin-wide output of thermal water to 110–140 kg·s −1 . Results underscore the utility of radiogenic Sr isotopes as valuable tracers of hydrothermal flow patterns and improve the understanding of temperature-dependent water-rock reactions in one of the largest continental hydrothermal systems on Earth.

Wyoming↗
USGS2025

Using subducting plate motion to constrain Cascadia slab geometry and interface strength

Subduction zones are home to multiple geohazards driven by the evolution of the regional tectonics, including earthquakes, volcanic eruptions and landslides. Past evolution builds the present-day structure of the margin, while the present-day configuration of the system determines the state-of-stress in which individual hazardous events manifest. Regional simulations of subduction zones provide a tool to synthesize the tectonic history of a region and investigate how geologic features lead to variations in the state of stress across the subduction system. However, it is challenging to design regional models that provide a force-balance that is consistent with the large-scale motion of surrounding tectonic plates while also not over-constraining the solution. Here, we present new models for the Cascadia subduction zone that meet these criteria and demonstrate how the motion of the subducting Juan de Fuca plate can be used to determine the along-strike variations in the viscous (long-term) coupling across the plate boundary. All successful models require lower viscous coupling in the northern section of the trench compared to the central and southern sections. However, due to uncertainties in the geometry of the Cascadia slab, we find that there is a trade-off between along-strike variation in viscous coupling and slab shape. Better constraints on the slab shape, and/or use of other observations are needed to resolve this trade-off. The approach presented here provides a framework for further exploring how geologic features in the overriding plate and the properties of the plate boundary region affect the state-of-stress across this and other subduction zones.

Cascadia subduction zone↗
USGS2026

Laboratory measurements of rise velocity for individual, hydrate-free and hydrate-coated gas bubbles in water

Tracking methane transport becomes more complicated in the deep ocean where seafloor release of methane gas bubbles occurs at the high pressures and low temperatures conducive to hydrate formation on bubble surfaces. Gas hydrate formation can make the bubble surface rigid, preventing the dynamic interplay between bubble size, shape and rise velocity that gas-transport models commonly rely upon when using bubble size to predict bubble rise velocity. To better constrain gas-transport model predictions, we conducted controlled laboratory measurements of rise velocity, u z , for hydrate-free air, methane, and xenon bubbles and hydrate-coated xenon bubbles. Experimental results for u z were compared to predicted u z values from several published parameterizations used to study dissolution of gas bubbles rising in the ocean. For both hydrate-free and hydrate-coated gas bubbles, the McGinnis et al. (2006) parameterization provides the most accurate u z predictions.

Geochemistry, Geophysics, Geosystems↗
USGS2025

Sulfur-to-iron ratio as a proxy for degree of organic sulfurization

The degree of organic sulfurization is broadly relevant yet underreported. We present a statistically significant correlation between whole rock S/Fe and the measured degree of organic sulfurization in the thermally immature Cenomanian–Turonian Eagle Ford Group. This relationship shows a sink switch for sulfur from pyrite to organic matter. Excess iron and excess sulfur relative to pyrite, which are mathematically related to S/Fe, provide better insights into organic sulfurization than previous approaches that calculate excess iron relative to detrital iron based on aluminum concentrations. Organic sulfurization and S/Fe are tightly coupled in the Eagle Ford partially due to limited sulfur- and iron-bearing components. Similar relationships could exist in other thermally immature, organic-rich, anoxia-prone, calcareous mudstones. The degree of organic sulfurization was estimated from S/Fe, which was used to map stratigraphic and regional variations of organic sulfurization across the Eagle Ford and to investigate how organic sulfurization relates to organic enrichment, organic preservation, and depositional redox chemistry. The extent of organic sulfurization is more tightly linked to organic preservation than enrichment. Together, organic sulfurization and Mo provide concordant evidence for depositional euxinia. The relationship between Mo and degree of organic sulfurization could indicate that sulfurized organic matter provides a pathway for Mo enrichment, but future work needs to disentangle direct mechanisms from indirect covariations between Mo, organic content, and degree of organic sulfurization. Whole rock elemental chemistry and programmed pyrolysis provide insights into organic sulfurization variations that can be upscaled and can guide subsequent detailed organic sulfur analyses.

Arkansas, Louisiana, Oklahoma, Texas↗
USGS2025

Horizontal transport of Picture Gorge Basalt magma through the Monument Dike Swarm determined by magnetic fabric

Flood basalts of the mid-Miocene Columbia River Basalt Group (CRBG) cover 210,000 km 2 of Washington, Oregon, and Idaho. The source of CRBG melt is debated; widely spaced feeder dike swarms can be projected toward hypothetical sources near the Oregon-Idaho border. In this study, we use anisotropy of magnetic susceptibility (AMS) to track magma flow in the Monument dike swarm (MDS), the feeder dikes of the Picture Gorge Basalt (PGB). This small formation of the main-phase CRBG eruptions allows us to explore in detail the localized dynamics of a large igneous province feeder system, with implications for the larger CRBG picture. We measured the magnetic fabric of 205 oriented paleomagnetic specimens subsampled from 97 samples collected from 15 dikes of the MDS. Thermal demagnetization and hysteresis loops show that the magnetic minerals are a mixture of single domain and multidomain sized titanomagnetites. At three dikes, the paleodepth of sampling was determined to be shallow (<350 m). Magma flowing through dikes has been shown—in most cases— to acquire an anisotropic magnetic fabric with an AMS ellipsoid minimum axis perpendicular to the wall and maximum axis aligned in the direction of flow. Of 15 dikes, 12 show horizontal flow directions in the plane of the dike. Only one dike displayed imbricated fabrics, showing westward flow away from the Oregon-Idaho border. We conclude that magma flow in the MDS was sub-horizontal from a distal source.

Oregon↗
USGS2025

Comparative properties of saponitic fault gouge and serpentinite muds cored from mud volcanoes of the Mariana subduction zone

We obtained 12 core samples for physical and chemical characterization from three serpentinite mud volcanoes (Yinazao, Asùt Tesoru, and Fantangisña) located on the forearc of the Mariana subduction system, that were drilled during International Ocean Discovery Program Expedition 366. Two samples from the Fantangisña mud volcano are interpreted to be clay-rich fault gouges derived from the subduction channel. Their bulk compositions are intermediate between the serpentinites and oceanic basalts. The oceanic crustal materials in the gouges have been thoroughly metasomatized and the serpentinites extensively altered to the trioctahedral, Mg-rich smectite clays saponite and corrensite. The only relict phases in clasts of crustal rock are accessory Ti- and P-bearing minerals. The two fault gouge samples have lower frictional strengths ( μ < 0.2) than the serpentinites ( μ = 0.2–0.4), and their measured permeabilities are also somewhat lower. Their physical and compositional properties correspond to saponitic gouges from other faults that juxtapose serpentinite against crustal rocks, in particular gouges from the two creeping traces of the San Andreas Fault recovered in the core from the San Andreas Fault Observatory at Depth. The décollement beneath Fantangisña mud volcano is thus expected to be very weak and likely characterized by stable slip.

Geophysics, Geochemistry, Geosystems↗
USGS2025

Insights from megacryst-included zircon dates on the spatial extent of magma mixing in the Tuolumne Intrusive Suite, California, USA

The spatial extent of mixing between separately emplaced batches of magma is a key component in understanding the incremental assembly of plutons. Potassium feldspar megacrysts (>3 cm length) in granodioritic rocks are hypothesized to record magma mixing and transport over hundred kyr timescales. CA-ID-TIMS U-Pb dates from zircon inclusions within 11 new megacryst samples and their surrounding matrix from the Tuolumne Intrusive Suite are presented as a means of evaluating the extent of mixing across a less than two km wide gradational contact. Megacrysts from within the gradational contact yielded zircon dates consistent with mixing or transport from the older porphyritic Half Dome Granodiorite, but the zircon included in megacrysts from the younger Cathedral Peak Granodiorite show no evidence of interaction with the porphyritic Half Dome. These results, along with the trace element geochemistry of the zircon, suggest that the porphyritic Half Dome and Cathedral Peak magmas where we sampled were not comagmatic, which constrains the width of a mixing front to the kilometer scale gradational contact between these units. From within this gradational contact, we do find evidence of mixing consistent with prior studies. Differences between the core- and rim-included zircon date spectra also suggest that protracted growth is recorded in some K-feldspar megacrysts but may not be a requirement for forming them.

California↗