Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Explorer”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9Linked to original sources
USGS1958

Airborne radioactivity surveys in geologic exploration

The value of airborne radioactivity surveys in guiding uranium exploration has been well established. Recent improvements in circuitry and development of semiquantitative analytical techniques permit a more comprehensive evaluation of the geologic distribution of radioactive materials that may prove useful in exploration for other minerals and in regional geologic studies. It is shown that placer deposits of heavy minerals can be detected from the air, and that the geometric configuration and average grade of the surficial part of the deposit can be approximated. Uranium-bearing phosphorite deposits may be similarly evaluated. Airborne surveys over the Coastal Plain area, Texas, show that the radioactivity profiles in some instances reflect the lithologic character of the underlying rocks. The sandstones are generally low in radioactivity (≈ 10 ppm equivalent uranium), the clays and tuffaceous rocks relatively higher. The intrinsic radioactivity of some lithologic units is sufficiently uniform and distinctive in character to permit their identification and lateral correlation on the airborne survey records. The results suggest that airborne surveys may thereby provide useful guidance in delineating lithologic continuity where the geology is poorly known or obscured.

Trace Elements Investigations↗
USGS1959

Lithologic log and drilling information for the Marble exploration hole 3, U15 area, Nevada Test Site, Nye County, Nevada

The Marble exploration hole 3 is in the northern part of the Tippipah Spring NE 7-1/2 minute quadrangle at the north end of Yucca Valley (fig.1). The collar elevation of the hole is about 5,316 feet and has the approximate Nevada State coordinates of N. 903,093 and E. 674,870. The hole was drilled to determine the physical and chemical properties of the marble within a radius of 200 feet of a point 950 feet below the surface. The exploration hole is 978 feet deep and was drilled from June 12 to July 8, 1959, by Minerals Engineering Co. of Grand Junction, Colorado, using conventional NX coring equiipment and a Portadrill 2,500 drill rig. Water-base bentonitic mud was used as the drilling fluid in the upper part of the hole. Clear water was used after circulation became unrestorable below 200 feet. The hole was cased from surface to 20 feet. The drilling rate during coring ranged from 2.0 to 19.3 minutes per foot and averaged 4.6 minutes per foot (table 1). The core recovered was excellent in quality and quantity. The average core recovery is 92.7 percent (table 2).

Nevada↗
USGS1952

Results of exploration at Lost Creek schroeckingerite deposit, Sweetwater County, Wyoming

The U. S. Geological Survey, on behalf of the Atomic Energy Commission, from July 1951 to February 1952, explored the Lost Creek schroeckingerite deposit, Sweetwater County, Wyoming, by means of auger- drilling, trenching, and bucket-drilling. This report presents an estimate of the inferred ore reserves obtained during this exploration. The inferred reserves are presented under three schedules. Schedule A is the reserves calculated for the main schroeckingerite-bearing area; Schedule B is the reserves for the smaller schroeckingerite-bearing area to the north of the main area. The grade and tonnage estimates for both Schedule A and Schedule B are divided into two groups--data for selective mining, and data for bulk-mining. Schedule C presents reserve estimates for a semi- selective mining method and was calculated for four selected blocks in the western half of the main schroeckingerite-bearing area. The inferred reserves of schroeckingerite available for bulk-mining in the area of Schedule A are about 3,000,000 tons that contain 0.005 percent uranium, or about 140 tons of metallic uranium. By bulk-mining, 900,000 tons containing 0.005 percent uranium, or U£ tons of metallic uranium, are available in the area of Schedule B. The inferred reserves available for selective mining in the area of Schedule A are 100,000 tons of schroeckingerite deposits that contain 0.030 percent uranium, or 30 tons of metallic uranium. By selective mining, 35,000 tons of schroeckingerite deposits that contain the 0.030 percent uranium, or 10 tons of metallic uranium, are available in the area of Schedule Bo Semi- selective mining in the four areas of Schedule C will yield about 650,000 tons of rock containing O.008 percent uranium, or 50 tons of metallic uranium.

Wyoming↗
USGS2021

Mid-latitude ice on Mars: A science target for planetary climate histories and an exploration target for in situ resources

In the last decade, aided by the high-resolution data and long-term monitoring by NASA’s Mars Reconnaissance Orbiter (MRO) and other spacecraft, extensive evidence has emerged supporting the presence of abundant H2O ground ice throughout much of the mid-latitudes of Mars. Growing evidence indicates that much of this ice is relatively pure, exists within a few meters of the surface, and reaches lower latitudes than previously thought, potentially providing an accessible record of the recent climate and a large in situ resource for future human exploration of Mars. We are reaching the limits of currently available datasets, however, just as we are starting to unlock the climate record and determine the water resources contained within the Martian mid-latitudes. A comprehensive understanding of the nature of this ice would significantly enhance our understanding of Mars’ climate history and total water budget, as well as the effects of orbital/axial forcing on volatiles. In this regard, Mars is a testbed for comparative planetary climate studies, including for exoplanets; these studies are particularly valuable because Mars has many similarities to Earth but lacks the complicating effects of oceans and a biosphere, such that orbital/axial forcing dominates climate variability. Quantifying the volumes, distribution, and properties of the water ice are crucial for addressing two overarching questions in the next decade: 1. What climate record is preserved in mid-latitude ice deposits on Mars? 2. How accessible is the ice as a resource for future exploration? New missions will enable us to capitalize on the major discoveries of the last decade and take the next giant leap in the upcoming decade to address these questions.

Bulletin of the AAS↗
USGS2021

Past, present, and future of Mars Polar Science: Outcomes and outlook from the 7th International Conference on Mars Polar Science and Exploration

Mars Polar Science is a subfield of Mars science that encompasses all studies of the cryosphere of Mars and its interaction with the Martian environment. Every 4 yr, the community of scientists dedicated to this subfield meets to discuss new findings and debate open issues in the International Conference on Mars Polar Science and Exploration (ICMPSE). This paper summarizes the proceedings of the seventh ICMPSE and the progress made since the sixth edition. We highlight the most important advances and present the most salient open questions in the field today, as discussed and agreed upon by the participants of the conference. We also feature agreed-upon suggestions for future methods, measurements, instruments, and missions that would be essential to answering the main open questions presented. This work is thus an overview of the current status of Mars Polar Science and is intended to serve as a road map for the direction of the field during the next 4 yr and beyond, helping to shape its contribution within the larger context of planetary science and exploration.

The Planetary Science Journal↗
USGS1969

Technologic gaps in exploration and exploitation of sub-sea mineral resources

Progress in marine hard mineral exploration and exploitation has been severely restricted by technologic gaps and the lack of discovery of deposits that can be exploited at a competitive price in the world markets. Immediate needs include improved techniques of placer drilling to permit more reliable evaluation of in situ deposits and improved systems of dredging and processing in greater depths of water and in heavier seas. New exploration techniques for locating and characterizing the subsurface deposits, and breakthroughs in low-cost methods for rapid detailed three-dimensional mapping of the seafloor relief similar to the photogrammetry breakthrough on land, would offer new incentives to industry. Advances in solution mining, in situ extraction techniques and rapid excavation with the possibilities of sub-sea entry, could eventually shift the emphasis in ocean mining from near shore placers to large-scale exploitation of deeply buried consolidated deposits.

Conference Paper↗
USGS2018

Application of imaging spectroscopy for mineral exploration in Alaska: A study over porphyry Cu deposits in the eastern Alaska Range

The U.S. Geological Survey tested the utility of imaging spectroscopy (also referred to as hyperspectral remote sensing) as an aid to regional mineral exploration efforts in remote parts of Alaska. Airborne imaging spectrometer data were collected in 2014 over unmined porphyry Cu deposits in the eastern Alaska Range using the HyMap™ sensor. Maps of the distributions of predominant minerals, made by matching reflectance signatures in the remotely sensed data to reference spectra in the shortwave infrared region, do not uniquely discriminate individual rock units. However, they do highlight hydrothermal alteration associated with porphyry deposits and prospects hosted mostly within the Nabesna pluton. In and around porphyry Cu deposits at Orange Hill and Bond Creek, unique spectral signatures are related to variations in chlorite and white mica abundance and their chemical composition. This is best revealed in the longer-wavelength 2,200-nm Al-OH absorption feature positions in pixels spectrally dominated by white mica proximal to porphyry deposits. Similar spectral signatures of chlorite and white mica wavelength positions were also recognized away from the porphyry deposits; follow-up sampling identified these satellite areas to also contain Cu-Mo-Au mineralized rock. Our study confirms that airborne imaging spectroscopy has application for regional mineral exploration in exposed mountainous terrain in Alaska.

Alaska↗
USGS1996

Scientific objectives of human exploration of Mars

While human exploration of Mars is unlikely to be undertaken for science reasons alone, science will be the main beneficiary. A wide range of science problems can be addressed at Mars. The planet formed in a different part of the solar system from the Earth and retains clues concerning compositional and environmental conditions in that part of the solar system when the planets formed. Mars has had a long and complex history that has involved almost as wide a range of processes as occurred on Earth. Elucidation of this history will require a comprehensive program of field mapping, geophysical sounding, in situ analyses, and return of samples to Earth that are representative of the planet's diversity. The origin and evolution of the Mars' atmosphere are very different from the Earth's, Mars having experienced major secular and cyclical changes in climate. Clues as to precisely how the atmosphere has evolved are embedded in its present chemistry, possibly in surface sinks of former atmosphere-forming volatiles, and in the various products of interaction between the atmosphere and surface. The present atmosphere also provides a means of testing general circulation models applicable to all planets. Although life is unlikely to be still extant on Mars, life may have started early in the planet's history. A major goal of any future exploration will, therefore, be to search for evidence of indigenous life.

American Astronautical Society, Scientific Technol↗
USGS2003

Use of input uncertainty and model sensitivity to guide site exploration

Three Quantitatively Directed Exploration (QDE) methods to identify optimum field sampling locations based on model input covariance and model sensitivity are presented. The first method bases site exploration only on the spatial variation in the uncertainty of input properties. The second method uses only the spatial variation in model sensitivities. The third method uses a first-order second-moment (FOSM) method to estimate the spatial variation in the output covariance. The FOSM method estimates output uncertainty using the product of the input covariance and model sensitivity. The three methods are illustrated by means of a synthetic groundwater site simulated with MODFLOW-2000. The groundwater-flow model computes piezometric head and the sensitivity of head to changes in input values. The QDE methods are evaluated by comparing model results to the "true" head. For the synthetic site used in this study, the most effective QDE method was the FOSM method.

Conference Paper↗
USGS2004

Exploration review

The worldwide budget for nonfuel mineral exploration was expected to increase by 27 percent in 2003 from the 2002 budget, according to the Metals Economics Group (MEG) of Halifax, Nova Scotia. The increase comes after five years of declining spending for mineral exploration.

Mining Engineering↗
USGS1976

Audio-magnetotelluric methods in reconnaissance geothermal exploration

An audio-magnetotelluric (AMT) system has been developed by the U.S. Geological Survey for low-cost reconnaissance exploration of geothermal regions. This is an electromagnetic sounding technique in which the scalar or Cagniard resistivity is computed at 12 frequencies logarithmically spaced from 7.5 to 18 600 Hz. Our system uses natural source fields except at the two upper frequencies of 10 200 and 18 600 Hz where artificial VLF sources are available. As a reconnaissance technique we use AMT surveys in conjunction with regional gravity, magnetic, and telluric surveys. The exploration depth is a function of the resistivities of the lithologic section, but typically ranges from the surface to 0.2 km in low-resistivity areas and to greater than 2 km in high-resistivity regions. Results of the initial reconnaissance AMT surveys provide a rational basis for deciding on the extent of costlier follow-up surveys. As part of the U.S. Geological Survey geothermal program, surveys were conducted in Long Valley and Surprise Valley, California; the Vale, Ore-Weiser, Idaho region; and Bruneau-Grand View, Raft River, and Island Park regions of Idaho. AMT surveys in five additional known geothermal resource areas (KGRA's) have been scheduled for completion by May 1975. In the Raft River and Bruneau-Grand View regions and Long Valley, follow-up electrical surveys substantiated the effectiveness of the AMT technique for reconnaissance surveying.

Conference Paper↗
USGS1965

Geological exploration from orbital altitudes

The National Aeronautics & Space Administration is planning geologic exploration from orbiting spacecraft. For that purpose it is evaluating new and refined exploration tools, often called remote sensors, including devices that are sensitive to force fields, such as gravity gradient systems, and devices that record the reflection or emission of electromagnetic energy. Both passive electromagnetic sensors (those that rely on natural sources of illumination, such as the Sun) and active electromagnetic sensors (which use an artificial source of illumination) are being considered.

Geotimes↗
USGS2017

Global nonfuel mineral exploration trends 2001-2015

The mission of the U.S. Geological Survey (USGS) National Minerals Information Center (NMIC) is to collect, analyze and disseminate information on the domestic and international supply of and demand for minerals and mineral materials essential to the U.S. economy and national security. Understanding mineral exploration activities and trends assists government policy makers, minerals industry decision makers and research entities in identifying where future sources of mineral supply are likely to be discovered, the amount and type of these resources and factors that may affect exploration and development.

Mining Engineering↗
USGS2014

Uncertainty and risk evaluation during the exploration stage of geothermal development

Quantifying and representing uncertainty for geothermal systems is often ignored, in practice, during the exploration phase of a geothermal development project. We propose that this occurs potentially because the task seems so formidable. The primary goal of this paper is to initiate a dialogue within the geothermal community about: which geothermal uncertainties should receive the most attention and which uncertainty analysis methods could provide the greatest benefit for the advancement of the geothermal energy industry. In this paper, we discuss uncertainty quantification techniques that are applicable to geothermal exploration. In general, uncertainty associated with data acquisition/processing (i.e., objective uncertainty) is small compared to the uncertainty in interpretational space (i.e., subjective uncertainty) that lies between data points where extrapolation is required. Therefore, it is important to classify, assess, and quantify uncertainty to help select strategies to reduce uncertainty, and to better gauge the impact that separate uncertainties have on the overall likelihood of project success. In addition, geostatistics provides multiple quantitative methods for producing stochastic models which adhere to measured data and spatial correlation. The petroleum industry has successfully used both geostastistics and decision analysis methods to combine diverse and multiple types of uncertainties. We argue that instead of one single and final interpretation of the geothermal system, numerous interpretations may be more indicative of the possible subsurface scenarios, and these different scenarios can be evaluated using decision analyses and value of information methodologies. Lastly, we recommend that the potential power generation of a geothermal reservoir should be grounded in the geologic data and modeling for a specific field and their estimated uncertainties. In this paper, we provide a brief overview of many of these topics while a more complete review has been recently published in Witter et al. (2019).

Conference Paper↗
USGS2021

Exploring basin-scale relations and unsupervised classification to quantify and automate the definition of assessment units in USGS continuous oil and gas resource assessments

The U.S. Geological Survey (USGS) assesses potential for undiscovered, technically recoverable oil and gas resources in priority geologic provinces and quantifies resource volume estimates within subdivisions called assessment units (AUs). AU boundaries are defined by USGS geologists using quantitative and qualitative geologic information. Variables contained in IHS Markit’s well and production databases can quantify and/or function as proxies for many of the qualitative, boundary-defining variables. This research explores a new approach to determine AU boundaries and the potential to automate their definition, using data analytics and machine learning algorithms on key, qualitative variables within the IHS Markit databases. Well and production data from the U.S. onshore Gulf Coast region for the Upper Cretaceous Eagle Ford Group and Austin Chalk are used in this analysis because each is relatively geologically uniform in Texas and both have recently been assessed by the USGS. The Eagle Ford is an example of an in situ continuous oil and gas accumulation, and the overlying Austin Chalk is an example of a combined conventional and continuous resource, sourced from the underlying Eagle Ford. Wellspecific values were extracted or calculated from data in IHS Markit’s well and production databases for depth to top and base of the formations, formation thickness, bottom-hole temperature, temperature gradient, temperature at base of formation, cumulative oil and gas production values, barrels of oil equivalent, oil and gas gravities, mud weights from initial well test, depth pressure ratio, and excess pressure. A raster for each variable was interpolated using the natural neighbor technique from the spatial analyst toolbox in ArcGIS. Rasters were then transformed using minimum-maximum scaling, which rescales the distribution to the range of 0–1. Clustering was completed using the iso cluster unsupervised classification tool on the normalized rasters. Raster cell groupings from two to ten were explored, with initial results demonstrating that four to six classes return the most differentiable groups, with depth to formation, oil gravity, pressure, and temperature variables containing the greatest between-group differences. Modeled clusters have spatial similarities to the geologically defined AUs, with indication that temperature and pressure are the most fundamental to AU definition. Input from geologists will remain crucial for further dividing clusters and defining final AUs, since AUs are defined by both qualitative and quantitative information; however, this research documents promising cluster modeling results for the automation of initial AU definitions.

Louisiana, Mississippi, Texas↗
USGS2023

Space-based Earth observation and ecosystem extent: Exploring opportunities

The purpose of this white paper is to explore and communicate potential new opportunities for using space-based Earth observation (EO) for monitoring biodiversity with a focus on ecosystem extent (the distribution of ecosystems on the Earth). It is part of a new activity of the Committee on Earth Observation Satellites (CEOS), a collaboration of the world’s space agencies that facilitates cross-agency coordination of EO. This activity, now manifested as the CEOS Ecosystem Extent Task Team, is focused on increasing the CEOS role in biodiversity applications, initially using ecosystem extent as a vehicle for discussion and exploration of ideas. The audience is two-fold: CEOS Principals that represent their agency, and the biodiversity community with a particular focus on the Convention on Biological Diversity (CBD) and their Parties as well as the UN System of Environmental-Economic Accounting (UN SEEA).

Report↗
USGS2025

Exploration for blind geothermal systems in the eastern Great Basin of Utah: An update on the “Lund North” INGENIOUS detailed study site

Existing geothermal production in Utah is commonly collocated with surficial expressions of geothermal heat including active hot springs and hot spring deposits. However, geothermal potential across the Great Basin region is thought to be much higher for hidden or blind geothermal systems. Accordingly, exploration techniques that can locate geothermal resources that lack surface thermal features could support future development of these systems. The goal of the INGENIOUS project is to reduce exploration risk and discover new, economically viable hidden geothermal systems in the Great Basin region. This paper summarizes the efforts and preliminary results of blind geothermal resource prospecting in Utah as part of the larger INGENIOUS project. The Lund North site in the Basin and Range province of southwest Utah was designated as the fourth detailed study site for the project. The site was initially identified from the preliminary Play Fairway Analysis (PFA) geothermal favorability map, which is based on various data elements, and the identification of favorable structural settings across Utah. This site contains existing legacy data including a thermal gradient borehole with a heat-flow value exceeding 220 mW/m 2 . New data collected at this site include terrestrial gravity, magnetotellurics, transient electromagnetics, fluid geochemistry, geologic mapping, UAV-based lidar, paleomagnetism, aeromagnetic surveys, and a shallow temperature survey. Preliminary data and model interpretations corroborate the presence of a large, east-dipping, northeast-southwest-trending normal fault on the edge of a typical Basin and Range graben. Quaternary fault mapping refined by high-resolution lidar surveys suggests a complex step over fault geometry. Utilizing multi-disciplinary datasets for further site assessment at Lund North will facilitate the development of a local-scale PFA and geothermal conceptual model. This new data will be used to site successive thermal gradient drilling to verify heat flow with temperatures at depth at the Lund North site and further investigate the existence of a local geothermal system.

Utah↗
USGS1977

Application of gold compositional analyses to mineral exploration in the United States

Native gold is a mineral composed of Au, Ag and Cu in solid solution and it usually contains one or more trace metals as lattice impurities, as mineral inclusions, in grain boundaries or in surface coatings. Alloy proportions of Au, Ag and Cu, together with certain other elements, can be thought of as constituting a gold “signature”. Gold is associated with a great variety of ore deposits and has characteristic signatures for each of several types of ore deposits. Signatures for gold derived from igneous-metamorphic, hypothermal, mesothermal and epithermal deposits reflect conditions of ore formation by their content of Ag, Cu and characteristic associated elements. At higher temperatures of ore formation, gold has low Ag and high Cu content, and Bi and Pb are the most abundant trace elements. But at lower temperatures of ore formation, Ag is high, Cu is low, and Pb is the most abundant trace element. The same trend in gold signatures is observable in gold mining districts, such as Central City, Colorado, where zoning as shown by mineral assemblages indicates ore deposition at progressively lower temperatures as the distance from a central high-temperature zone increases. The signatures of gold may be useful in searching for porphyry Cu deposits. Signatures from Butte (Montana), Mineral Park (Arizona) and Cala Abajo (Puerto Rico), on the basis of limited sampling, are similar and distinctive. They are characterized by a similar assemblage of trace elements and are relatively high in both Ag and Cu. Another application of gold compositional data is in tracing placer gold to its bedrock source. For example, the Ag content of placer gold in the Tarryall district of Colorado differed from that of nearly all of the bedrock sources of gold found by early prospectors. However, one lightly prospected area peripheral to the Tertiary quartz monzonite stock at Montgomery Gulch contains gold with a Ag content similar to that of the placer gold. This area is the most likely source of the gold in the productive placers and may be a potential exploration target. Gold signatures may be useful in prospecting for metals other than gold. Several metals of low crustal abundance — notably Sn, W, Mo and the Pt group metals — are detected in analyses of some gold samples and may indicate economic deposits of these metals.

Journal of Geochemical Exploration↗