SEARCH · Geology Reports

Results for “Environment and Health”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9Linked to original sources

USGS1999

Town Lake bottom sediments : a chronicle of water quality changes in Austin, Texas, 1960-98

Town Lake, the last in the chain of Highland Lakes on the Colorado River, runs through the center of Austin, Texas. On any given day, grebes and coots dot the water, rowers skim alongside, and the sparkle of the sun on the water can be admired from the adjacent hike and bike path and from the windows of nearby office buildings. During the summer months, crowds gather along the shores of Town Lake to watch as many as 1 million Mexican Free-Tail bats emerge from under the Congress Avenue bridge. But below the lazily moving azure water lies a bed of sediment about 1 meter (m) thick?sediment that has been deposited gradually since the reservoir was formed in 1959 and that has been recording changes in water quality since that time. What can this sediment tell us about the history of water quality in the Colorado River? And what does it say about the effects of the rapid urbanization of Austin and the future health of our environment?

Texas↗

USGS2009

Emissions from coal fires and their impact on the environment

Self-ignited, naturally occurring coal fires and fires resulting from human activities persist for decades in underground coal mines, coal waste piles, and unmined coal beds. These uncontrolled coal fires occur in all coal-bearing parts of the world (Stracher, 2007) and pose multiple threats to the global environment because they emit greenhouse gases - carbon dioxide (CO 2 ), and methane (CH 4 ) - as well as mercury (Hg), carbon monoxide (CO), and other toxic substances (fig. 1). The contribution of coal fires to the global pool of atmospheric CO 2 is little known but potentially significant. For China, the world's largest coal producer, it is estimated that anywhere between 10 million and 200 million metric tons (Mt) of coal reserves (about 0.5 to 10 percent of production) is consumed annually by coal fires or made inaccessible owing to fires that hinder mining operations (Rosema and others, 1999; Voigt and others, 2004). At this proportion of production, coal amounts lost to coal fires worldwide would be two to three times that for China. Assuming this coal has mercury concentrations similar to those in U.S. coals, a preliminary estimate of annual Hg emissions from coal fires worldwide is comparable in magnitude to the 48 tons of annual Hg emissions from all U.S. coal-fired power-generating stations combined (U.S. Environmental Protection Agency, 2002). In the United States, the combined cost of coal-fire remediation projects, completed, budgeted, or projected by the U.S. Department of the Interior's Office of Surface Mining Reclamation and Enforcement (OSM), exceeds $1 billion, with about 90% of that in two States - Pennsylvania and West Virginia (Office of Surface Mining Enforcement and Reclamation, 2008; fig. 2). Altogether, 15 States have combined cumulative OSM coal-fire project costs exceeding $1 million, with the greatest overall expense occurring in States where underground coal fires are predominant over surface fires, reflecting the greater cost of extinguishing underground fires (fig. 2) (see 'Controlling Coal Fires'). In this fact sheet we review how coal fires occur, how they can be detected by airborne and remote surveys, and, most importantly, the impact coal-fire emissions may have on the environment and human health. In addition, we describe recent efforts by the U.S. Geological Survey (USGS) and collaborators to measure fluxes of CO 2 , CO, CH 4 , and Hg, using groundbased portable detectors, and combining these approaches with airborne thermal imaging and CO 2 measurements. The goal of this research is to develop approaches that can be extrapolated to large fires and to extrapolate results for individual fires in order to estimate the contribution of coal fires as a category of global emissions.

Fact Sheet↗

USGS2025

USGS Environmental Health Program—Per- and polyfluoroalkyl substances (PFAS) science activities [postcard]

Introduction The U.S. Geological Survey (USGS) Environmental Health Program conducts various activities related to PFAS (per- and polyfluoroalkyl substances) to understand their impacts on human health and the environment. Through these activities, the program aims to provide critical information and resources to address the challenges posed by PFAS contamination.

General Information Product↗

USGS2008

The Global Flows of Metals and Minerals

This paper provides a preliminary review of the trends in worldwide metals and industrial minerals production and consumption based on newly developed global metals and minerals Material Flow Accounts (MFA). The MFA developed encompass data on extraction and consumption for 25 metal and mineral commodities, on a country-by-country and year-by-year basis, for the period 1970 to 2004. The data-base, jointly developed by the authors, resides with the U.S. Geological Survey (USGS) as individual commodity Excel workbooks and within a Filemaker data management system for use in analysis. Numerous national MFA have been developed to provide information on the industrial metabolism of individual countries. These MFA include material flows associated with the four commodity categories of goods that are inputs to a country's economy, agriculture, forestry, metals and minerals, and nonrenewable organic material. In some cases, the material flows associated with the creation and maintenance of the built infrastructure (such as houses, buildings, roads, airports, dams, and so forth) were also examined. The creation of global metals and industrial minerals flows is viewed as a first step in the creation of comprehensive global MFA documenting the historical and current flows of all of the four categories of physical goods that support world economies. Metals and minerals represent a major category of nonrenewable resources that humans extract from and return to the natural ecosystem. As human populations and economies have increased, metals and industrial minerals use has increased concomitantly. This dramatic growth in metals and minerals use has serious implications for both the availability of future resources and the health of the environment, which is affected by the outputs associated with their use. This paper provides an overview of a number of the trends observed by examining the database and suggests areas for future study.

Open-File Report↗

USGS2019

Analysis of groundwater response to tidal fluctuations, Operable Unit 1, Naval Base Kitsap, Keyport, Washington

Chlorinated volatile organic compounds have affected groundwater beneath a former 9-acre landfill at Operable Unit 1 (OU 1) of Naval Base Kitsap (NBK) Keyport, in Keyport, Washington. The landfill was the primary disposal area for domestic and industrial waste generated by NBK Keyport from the 1930s through 1973. Naval Facilities Engineering Command Northwest, in conjunction with the Environmental Protection Agency, Washington State Department of Ecology, and the Suquamish Tribe, is charged with collecting necessary data to monitor the contamination left in place and to ensure that the site does not pose a risk to human health or the environment. To support these efforts, refined information was collected on how groundwater levels throughout OU 1 respond to tidal fluctuations at this nearshore site adjacent to Liberty Bay, an inlet of Puget Sound. The information was analyzed to determine the optimal times during the semidiurnal and the neap-spring tidal cycles to sample groundwater for contaminants associated with fresh groundwater originating from OU 1. The optimal times for sampling are presumed to be when fresh groundwater flowing seaward is least impeded by elevated tides, and those times are related to predicted tide levels by tidal lags, the durations between low tides, and corresponding low groundwater levels. Discrete groundwater-specific conductance data also were collected to determine if a seawater/freshwater interface was present at any of the monitoring wells, and to inform decisions on the depth at which groundwater should be sampled in existing wells. Groundwater and surface-water levels were monitored at 19 monitoring wells and five adjacent surface-water sites. Specific conductance was monitored in each surface-water site. All time-series data parameters were collected every 15 minutes during a 4-week duration to measure how nearshore groundwater responds to tidal forcing. Time-series data were collected from July 12, 2018, to August 8, 2018, a period that included neap and spring tides. Vertical water-quality profiles were measured once in the screened interval of nine selected monitoring wells. The profiles included measurements at the top, middle, and bottom of each saturated screen interval. Tidal lag times were determined relative to tidal levels in Liberty Bay (rather than in the more nearby Tide Flats) because the predicted tides for the Poulsbo, Washington Station (National Oceanic and Atmospheric Administration [NOAA] Station 9445719) that are used to schedule groundwater sampling represent open-water conditions in the area; a sill that separates Dogfish Bay from the Tide Flats clearly affects the timing and magnitude of low-low tides in the Tide Flats. Calculated tidal lag times were divided into three general groups: (1) wells where groundwater responded to tidal level changes immediately, (2) wells where groundwater responded to tidal level changes within about 2–5 hours, and (3) wells where groundwater had minimal response to tidal level changes. Groundwater levels in the middle group of wells primarily responded in concert with tidal level changes in the Tide Flats rather than tidal level changes in Liberty Bay. An intended sampling depth refinement based on an assessment of transient seawater intrusion was not completed because of a failure to collect specific-conductance time-series data in select wells. Instead, discrete specific-conductance data from this and prior studies were evaluated to determine that the midpoint of well screens in OU 1 wells can be assumed to be a reasonably representative of undiluted groundwater. When sampling during spring (rather than neap) tides (as has generally been the standard practice at OU 1), the optimal time to sample the monitoring wells influenced by tides would be to add the tidal lags presented in this report to the time of the predicted low-low tide for Liberty Bay as measured at NOAA Station 9445719 at Poulsbo, Washington. Sampling schedules for the six wells where groundwater levels were only minimally influenced by tide changes should not be constrained by tidal conditions.

Washington↗

USGS2025

Wake Atoll vessel movement biosecurity program efficacy

Executive Summary The purpose of this Wake Atoll Vessel Movement Biosecurity Program Efficacy document is to provide the United States Air Force (USAF) with an unbiased review of the current (2015; hereafter referred to as the 2015 Biosecurity Plan) biosecurity plan for the military base Wake Island Airfield (WIA) on Wake Atoll (hereafter Wake). Periodic reviews are an integral step for evaluating plan efficacy and updating plans with new information for improving plan effectiveness. The U.S. Geological Survey (USGS) acted as an external expert to provide the first unbiased assessment of the program and observe how it was being implemented. The USAF 2015 Wake Island Biosecurity Management Plan goes beyond sea vessel and container biosecurity; however, those aspects were not included in this evaluation. We used several methods for a quality assurance evaluation of the 2015 sea vessel and shipping container biosecurity program specified in the Biosecurity Plan. Our evaluation included real-time observations in Hawai`i and at Wake. We surveyed cargo staging areas and empty shipping containers before supply shipment and the containers, barge, and marina at Wake after shipment. We used various detection tools and techniques (for example, visual encounter surveys, glue boards, chew cards, camera traps, and so on). We carried out an insect mortality experiment trial using one of the required shipping container biosecurity tools (dichlorvos impregnated pest strips). We also included a table-top review of documentation (largely the 2015 Biosecurity Plan) with respect to our observations to provide an assessment of how well the Biosecurity Plan protocols were carried out and how well they serve their intended purpose. We observed biosecurity concerns in each focal area and stage of cargo handling (before and after barge movement) across all surveys of containers, flat racks, break bulk, warehouses, and dock areas. Using visual inspections, we recorded biosecurity concerns for every empty container we inspected before it was to be stuffed with cargo. Most containers had structural integrity issues (such as holes and damaged floorboards) and sanitation concerns, including live animals and plant matter or seeds. About one third of the containers had mold and a few had wet floorboards or standing water. We detected live animals on the break bulk, and flat racks were in poor condition. Next, we inspected cargo staging areas and noted extensive permeability of the building where cargo was staged for the 2018 resupply shipment and the building that had typically been used. We included the adjacent dock area used for staging break bulk, shipping containers and mooring the barge. We detected more than 5,000 individuals of 105 species. We also detected seeds in each location and scattered vegetation in the dock area, including growing in from the area outside separated by a chain link fence. During surveys at Wake, we observed that 100 percent of the shipping containers, including all containers sent with required biosecurity tools, had live animals. The barge had only one unsecured snap trap for intercepting rodents aboard, we saw areas with fairly deep layers of dirt (or soil; we did not examine it to determine its properties), and there was plant matter with seed heads on the barge gangway that could easily be transported onto the barge. There was also only one snap trap station that was improperly placed on the dock. We also observed piled wood and vegetation nearby that could provide refuge to potential stowaway animals escaping. Combined, surveys of the containers, staging areas, barges, and receiving area in Hawai`i and at Wake resulted in detection of more than 9,000 individuals of 131 animal species; nearly 4,000 individuals of 62 species were detected in surveys of containers once they had arrived at Wake. None of the species identified are known to be native to Wake. Our preliminary risk analysis of all species detected included eight species that we scored as high risk of potentially negative effects to biodiversity, infrastructure, or human health should they arrive at Wake and become established. Six of these species were only recorded using tools not clearly required by the Biosecurity Plan or being used to implement the plan. We observed that the required biosecurity tools intended to intercept animals in the cargo staging area did not target the suite nor number of species present. Our analysis also indicated the required biosecurity tools intended to intercept animals in shipping containers were inadequate to handle the volume of organisms that were in the containers. The insect mortality trial experiment showed the pest strips were highly effective for only one of the three species tested, leaving uncertainty about how effective they are across the suite of potential species stowing away in cargo and containers. Base Operating Support (BOS) did not carry out all Biosecurity Plan actions, but we also noted the document uses terminology such as “recommendation” as opposed to “requirement” which may lead contractors to consider those actions as optional. However, USAF provided evidence of BOS training and follow up; this included detailed identification of specific requirements for some of the biosecurity actions that we did not observe being carried out. The 2015 Biosecurity Plan contains critical and useful components that seem to be well carried out. However, we also saw discrepancies, weaknesses, or both across methods and protocols currently used for Wake Atoll biosecurity. We observed shortcomings at each stage of our survey as well as in the plan as written, and we suggest general modifications to the Biosecurity Plan for consideration to potentially strengthen biosecurity overall. Prevention is the most efficient and cost-effective biosecurity measure. Based on our findings, we see possible solutions to improve existing preventative biosecurity efforts and reduce potential incursion at Wake. These potential solutions include creating and implementing the following: Minimum cargo staging area sanitation and permeability standards, Minimum shipping container integrity and sanitation standards, Stand-alone inspection protocols, Inspection checklists, Monitoring protocols, Accountability reporting, Horizon scanning for prioritizing and targeting species of highest concern, Expansion of educational materials and outreach, Schedules for biosecurity plan reviews and updates Management of invasive species enhances capability to protect human health and the environment as well as to advance mission accomplishment. Biosecurity plans are an integral component for addressing invasive species. Periodic evaluation of the efficacy of these plans is useful for identifying elements that are working well and for illuminating those that can be improved. Evaluations encourage consideration of new tools and adaptation of processes to achieve better outcomes and accommodate potential future threats more efficiently and more cost effectively.

Open-File Report↗

USGS1995

The strategy for improving water-quality monitoring in the United States; final report of the Intergovernmental Task Force on Monitoring Water Quality; technical appendices

The Intergovernmental Task Force on Monitoring Water Quality (ITFM) prepared this report in collaboration with representatives of all levels of government and the private sector. The report recommends a strategy for nationwide water-quality monitoring and technical monitoring improvements to support sound water-quality decisionmaking. The strategy is intended to achieve a better return on public and private investments in monitoring, environmental protection, and natural resources management. It is also designed to expand the base of information useful to a variety of users at multiple geographic scales. Institutional and technical changes are needed to improve water-quality monitoring and to meet the full range of monitoring requirements. Monitoring must be incorporated as a critical element of program planning, implementation, and evaluation. The strategy includes recommendations in many key elements, such as the development of goal-oriented monitoring and indicators, institutional collaboration, and methods comparability. Initial actions have been taken to implement the strategy. Several Federal agencies have jointly purchased and shared remotely sensed land-cover information needed for water assessment. Major agency data systems are using common data-element names and reference tables that will ensure easy sharing of data. A number of States have held meetings with collectors of water information to initiate statewide monitoring strategies. New monitoring guidance has been developed for Federal water-quality grants to States. Many State offices have changed monitoring programs to place emphasis on priority watersheds and to improve assessment of water quality. As the competition increases for adequate supplies of clean water, concerns about public health and the environment escalate, and more demands are placed on the water information infrastructure. To meet these demands, the collaborative approach has already produced benefits, which will continue to grow as the recommendations are implemented

Open-File Report↗

USGS2007

Effects of Regulation and Technology on End Uses of Nonfuel Mineral Commodities in the United States

The regulatory system and advancement of technologies have shaped the end-use patterns of nonfuel minerals used in the United States. These factors affected the quantities and types of materials used by society. Environmental concerns and awareness of possible negative effects on public health prompted numerous regulations that have dramatically altered the use of commodities like arsenic, asbestos, lead, and mercury. While the selected commodities represent only a small portion of overall U.S. materials use, they have the potential for harmful effects on human health or the environment, which other commodities, like construction aggregates, do not normally have. The advancement of technology allowed for new uses of mineral materials in products like high-performance computers, telecommunications equipment, plasma and liquid-crystal display televisions and computer monitors, mobile telephones, and electronic devices, which have become mainstream products. These technologies altered the end-use pattern of mineral commodities like gallium, germanium, indium, and strontium. Human ingenuity and people?s demand for different and creative services increase the demand for new materials and industries while shifting the pattern of use of mineral commodities. The mineral commodities? end-use data are critical for the understanding of the magnitude and character of these flows, assessing their impact on the environment, and providing an early warning of potential problems in waste management of products containing these commodities. The knowledge of final disposition of the mineral commodity allows better decisions as to how regulation should be tailored.

Scientific Investigations Report↗

USGS2009

Diel Sampling of Groundwater and Surface Water for Trace Elements and Select Water-Quality Constituents at a Former Zinc Smelter Site near Hegeler, Illinois, August 1-3, 2007

Surface water can exhibit substantial diel variations in the concentration of a number of constituents. Sampling regimens that do not characterize diel variations in water quality can result in an inaccurate understanding of site conditions and of the threat posed by the site to human health and the environment. Surface- and groundwater affected by acid drainage were sampled every 60 to 90 minutes over a 48-hour period at a former zinc smelter known as the Hegeler Zinc Superfund Site, in Hegeler, Ill. Groundwater-quality data from a well at the site indicate stable, low pH, weakly oxidizing geochemical conditions in the aquifer. With the exceptions of temperature and pH, no constituents exhibited diel variations in groundwater. Variations in temperature and pH likely were not representative of conditions in the aquifer. Surface water was sampled at a site on Grape Creek. Diel variations were observed in temperature, dissolved oxygen, pH, and specific conductance, and in the concentrations of nitrite, barium, iron, lead, vanadium, and possibly uranium. Concentrations during the diel cycles varied by about an order of magnitude for nitrite and varied by about a factor of two for barium, iron, lead, vanadium, and uranium. Temperature, dissolved oxygen, specific conductance, nitrite, barium, lead, and uranium generally reached maximum values during the afternoon and minimum values during the night. Iron, vanadium, and pH generally reached minimum values during the afternoon and maximum values during the night. These variations would need to be accounted for during sampling of surface-water quality in similar hydrologic settings. The temperature variations in surface water were affected by variations in air temperature. Concentrations of dissolved oxygen were affected by variations in the intensity of photosynthetic activity and respiration. Nitrite likely was formed by the oxidation of ammonium by dissolved oxygen and degraded by its anaerobic oxidation by ammonium or as part of the decomposition of organic matter. Variations in pH were affected by the photoreduction of Fe3+ to Fe2+ and the precipitation of iron oxyhydroxides. Diel variations in concentrations of iron and vanadium were likely caused by variations in the dissolution and precipitation of iron oxyhydroxides, oxyhydroxysulfates, and hydrous sulfates, which may have been affected by in the intensity of insolation, iron photoreduction, and the concentration of dissolved oxygen. The concentrations of lead, uranium, and perhaps barium in Grape Creek may have been affected by competition for sorption sites on iron oxyhydroxides. Competition for sorption sites was likely affected by variations in pH and the concentration of Fe2+. Constituent concentrations likely also were affected by precipitation and dissolution of minerals that are sensitive to changes in pH, temperature, oxidation-reduction conditions, and biologic activity. The chemical and biologic processes that resulted in the diel variations observed in Grape Creek occurred within the surface-water column or in the underlying sediments.

Scientific Investigations Report↗

USGS2019

Hydrologic balance, water quality, chemical-mass balance, and geochemical modeling of hyperalkaline ponds at Big Marsh, Chicago, Illinois, 2016–17

Hyperalkaline (pH greater than 12) ponds and groundwater exist at Big Marsh near Lake Calumet, Chicago, Illinois, a site used by the steel industry during the mid-1900s to deposit steel- and iron-making waste, in particular, slag. The hyperalkaline ponds may pose a hazard to human health and the environment. The U.S. Geological Survey (USGS), in cooperation with the Environmental Protection Agency (EPA) and in collaboration with the City of Chicago’s Park District, completed a study to evaluate the hydrologic balance, water quality, and chemical-mass balance of hyperalkaline ponds at Big Marsh and geochemical modeling used to evaluate remediation options for water quality at the site based on data collected in 2016–17. Synoptic measurements of surface-water and groundwater elevations were used to determine flow directions and to enable a preliminary estimate of the hydrologic balance for the ponds. Water-quality samples also were collected and analyzed for selected constituents including major anions and cations, nutrients, metals, and trace elements. The results of the water-quality analyses were used to develop a geochemical model to evaluate concentrations, factors affecting pH, and the state of equilibrium between surface waters and atmospheric carbon dioxide. The geochemical model was used to evaluate remediation scenarios using riprap, spillways, or active aeration. The results indicate that active aeration will decrease the pH to near 7.5 in about 8 hours, the fastest rate of the scenarios. Passive aeration, such as riprap or spillways, also can be effective at decreasing the pH in about 45 hours, but spatial obstacles limit their implementation. Seasonal variations in temperature also affect the rate of equilibration, where colder temperatures may have a lower pH than warmer temperatures and may affect the timing and frequency of remediation.

Illinois↗

USGS2003

Methodology for estimating times of remediation associated with monitored natural attenuation

Natural attenuation processes combine to disperse, immobilize, and biologically transform anthropogenic contaminants, such as petroleum hydrocarbons and chlorinated ethenes, in ground-water systems. The time required for these processes to lower contaminant concentrations to levels protective of human health and the environment, however, varies widely between different hydrologic systems, different chemical contaminants, and varying amounts of contaminants. This report outlines a method for estimating timeframes required for natural attenuation processes, such as dispersion, sorption, and biodegradation, to lower contaminant concentrations and mass to predetermined regulatory goals in groundwater systems. The time-of-remediation (TOR) problem described in this report is formulated as three interactive components: (1) estimating the length of a contaminant plume once it has achieved a steady-state configuration from a source area of constant contaminant concentration, (2) estimating the time required for a plume to shrink to a smaller, regulatoryacceptable configuration when source-area contaminant concentrations are lowered by engineered methods, and (3) estimating the time needed for nonaqueous phase liquid (NAPL) contaminants to dissolve, disperse, and biodegrade below predetermined levels in contaminant source areas. This conceptualization was used to develop Natural Attenuation Software (NAS), an interactive computer aquifers. NAS was designed as a screening tool and requires the input of detailed site information about hydrogeology, redox conditions, and the distribution of contaminants. Because NAS is based on numerous simplifications of hydrologic, microbial, and geochemical processes, the program may introduce unacceptable errors for highly heterogeneous hydrologic systems. In such cases, application of the TOR framework outlined in this report may require more detailed, site-specific digital modeling. The NAS software may be downloaded from the Web site http://www.cee.vt.edu/NAS/ Application of NAS illustrates several general characteristics shared by all TOR problems. First, the distance of stabilization of a contaminant plume is strongly dependent on the natural attenuation capacity of particular ground-water systems. The time that it takes a plume to reach a steady-state configuration, however, is independent of natural attenuation capacity. Rather, the time of stabilization is most strongly affected by the sorptive capacity of the aquifer, which is dependent on the organic matter content of the aquifer sediments, as well as the sorptive properties of individual contaminants. As a general rule, a high sorptive capacity retards a plume.s growth or shrinkage, and increases the time of stabilization. Finally, the time of NAPL dissolution depends largely on NAPL mass, composition, geometry, and hydrologic factors, such as ground-water flow rates. An example TOR analysis for petroleum hydrocarbon NAPL was performed for the Laurel Bay site in South Carolina. About 500 to 1,000 pounds of gasoline leaked into the aquifer at this site in 1991, and the NAS simulations suggested that TOR would be on the order of 10 years for soluble and poorly sorbed compounds, such as benzene and methyl tertiary-butyl ether (MTBE). Conversely, TOR would be on the order of 40 years for less soluble, more strongly sorbed compounds, such as toluene, ethylbenzene, and xylenes (TEX). These TOR estimates are roughly consistent with contaminant concentrations observed over 10 years of monitoring at this site where benzene and MTBE concentrations were observed to decrease rapidly and are approaching regulatory maximum concentration limits, whereas toluene, ethylbenzene, and xylene concentrations decreased at a slower rate and have remained relatively high. An example TOR analysis for petroleum hydrocarbon NAPL was performed for the Laurel Bay site in South Carolina.

South Carolina↗

USGS1995

Characterization of selected radionuclides in sediment and surface water in Standley Lake, Great Western Reservoir, and Mower Reservoir, Jefferson County, Colorado, 1992

Lake sediment and surface water from Standley Lake, Great Western Reservoir, and Mower Reservoir, near Denver, Colorado, were sampled and analyzed for selected radionuclides during August through October, 1992. Sample concentrations were summarized and compared to results from a study conducted in 1983-84. Median plutonium-239,240 (239,240Pu) concentrations in lake-sediment grab samples from Standley Lake, Great Western Reservoir, and Mower Reservoir were 0.037, 0.105, and 0.351 picocuries per gram (pCi/g). The maximum concen- tration of 239,240Pu dissolved in lake water was 0.009 picocuries per liter, substantially below limits suggested by the Colorado Department of Health and the Environment. Dissolved concentrations of gross alpha and uranium isotopes were below National Drinking Water Standards in all water samples. There was no statistically significant difference between 239,240Pu concentration in lake-sediment grab samples collected from Standley Lake in 1983-84 and in 1992; however, there was a small, but statistically significant, difference at Great Western Reservoir (p<0.05). In 1992 at Great Western Reservoir, median 239,240Pu concentrations were 0.040 pCi/g lower than in 1983-84. There was a small, but statistically significant (p<0.05) difference in 239,240Pu concentrations in lake- bottom-sediment cores collected in 1983-84 and in 1992. Measured concentrations tended to be higher in 1983-84 than in 1992. The differences were greatest at concentrations above 1.5 pCi/g; in those samples concentrations were 10 to 30% higher in 1983-84 than in 1992.

Colorado↗

USGS1990

National water summary 1987: Hydrologic events and water supply and use

Water use in the United States, as measured by freshwater withdrawals in 1985, averaged 338,000 Mgal/d (million gallons per day), which is enough water to cover the 48 conterminous States to a depth of about 2.4 inches. Only 92,300 Mgal/d, or 27.3 percent of the water withdrawn, was consumptive use and thus lost to immediate further use; the remainder of the withdrawals (72.7 percent) was return flow available for reuse a number of times as the water flowed to the sea. The 1985 freshwater withdrawals were much less than the average 30 inches of precipitation that falls on the conterminous States each year; consumptive use accounted for only 7 percent of the estimated annual runoff of 1,230,000 Mgal/d. Nonetheless, as the State summaries on water supply and use clearly show, water is not always available when and where it is needed. Balancing water demands with available water supplies constitutes one of the major resource allocation issues that will face the United States in the coming decade. Of the 1985 freshwater withdrawals, 78.3 percent (265,000 Mgal/d) came from surface-water sources (streams and lakes), and 21.7 percent (73,300 Mgal/d) came from ground water. Surface water provided drinking water for about 47 percent of the Nation's total population. It was the source of 59.9 percent of the Nation's public-supply systems. For self-supplied withdrawals, surface water accounted for 1.6 percent of the domestic and commercial uses; 64.0 percent of the industrial and mining use; 99.4 percent of the thermoelectric generation withdrawals, mainly for cooling water; and 65.6 percent of the agricultural withdrawals. Eight States accounted for 43 percent of the surface-water use; California, Colorado, and Idaho used surface water primarily for irrigation, and Dlinois, Michigan, Ohio, Pennsylvania, and Texas used surface-water primarily for cooling condensers or reactors in thermoelectric plants. Ground water provided drinking water for 53 percent of the Nation's total population and nearly all the rural population. It was the source of 40.1 percent of the public-supply systems withdrawals. For self-supplied withdrawals, ground water accounted for 11.3 percent of the domestic and commercial use, 17.3 percent of the industrial and mining withdrawals, less than 1 percent of the thermoelectric generation withdrawals, and 34.4 percent of the agricultural withdrawals (irrigation and livestock). Eight States Arizona, Arkansas, California, Florida, Idaho, Kansas, Nebraska, and Texas accounted for 66 percent of the ground water used. In each of those States, as in many other States, irrigation was the major use of ground water. Each offstream-use category described in the State summaries public supply, domestic and commercial, industrial and mining, thermoelectric power, and agriculture (irrigation and livestock) followed its own geographic pattern as described below. Consumptive use of water effectively removes the water from immediate further use downstream of the withdrawal point. Of the total amount of consumptive water use in 1985, agricultural use accounted for about 82.5 percent. More than one-half (53 percent) of irrigation water is consumptively used by evapotranspiration or is incorporated into the crop. This is a good indication of the effect that irrigated agriculture can have in a river basin where irrigation is a major activity. The availability of return flows for reuse depends largely on where the water reenters the system. If the return flows are discharged to a stream, they usually can be reused; if they are discharged to a saltwater estuary, they are effectively lost to further use because of water-quality degradation just as if the water had been consumptively used. Similarly, water that recharges a highly transmissive aquifer can be available for reuse either through pumpage from a well or as discharge to a local stream. Thus, much of the water withdrawn for different uses can and does become available for further use although the quality might degrade with each additional use. The allocation and the management of water resources are the responsibilities of the individual States and water institutions within the States. These institutions are evolving in response to the challenges of water management problems. As the individual State summaries indicate, recent State legislation deals with facilitating water transfers within the States as a means of reducing imbalances between water supplies and use, with emphasizing water conservation in times of drought and at places where groundwater depletion is a problem of long standing, and with reducing threats to public health and the environment from water pollution. Most of the State summaries indicate the expectation that water use will continue to increase in the future and that water contamination will continue to be a major water concern. Both issues will require increasingly intensive water management in the future. Whether the water resources under management are considered to be fully appropriated or over appropriated, as in some Western States, or whether the resource could support additional development, as is the situation in most States, improved water-use information will play a key role in future water management efforts.

Water Supply Paper↗

USGS1997

Pesticides in surface waters: distribution, trends, and governing factors

Pesticde use in agriculture and non-agriculture settings has increased dramatically over the last several decades. Concern about adverse effects on the environment and human health has spurred an enormous amount of research into their environmental behavior and fate. Pesticides in Surface Waters presents a comprehensive summary of this research. This book evaluates published studies that focus on measuring pesticide concentration. The studies chosen include peer reviewed scientific literature, government reports, laboratory studies, and those using microcosms and artificial streams and ponds. The authors used this information to develop their overview of pesticide contamination of surface waters. The exhaustive compilation of data along with the fundamental science make this book essential for those involved in pesticide use, environmental protection, water quality, and human or ecological risk assessment. Pesticides in Surface Waters covers the results of actual studies, sources of pesticides to surface water, fate and transport, and environmental significance. Hundreds of data-packed tables, maps, charts, and drawings illustrate the key points, making research and application easy and cost effective.

Book↗

USGS2009

Water security - Nation state and international security implications

A terrorist attack such as poisoning and sabotage of the national water supply and water-quality infrastructure of the continental United States or any country, could disrupt the delivery of vital human services, threaten both public health and the environment, potentially cause mass casualties and pose grave public concern for homeland security. Most significantly, an attack on water resources would weaken social cohesion and trust in government. A threat to continuity of services is a potential threat to continuity of government since both are necessary for continuity of operations. Water infrastructure is difficult to protect, as it extends over vast areas across the U.S. and for which ownership is overwhelmingly nonfederal (approximately 85 percent). Since the 9111 attacks, federal dam operators and water and wastewater utilities have established counter measures. Similar measures have been taken in countries around the world. These include enhanced physical security, improved coordination between corporate ownership, Department of Homeland Security, and local law enforcement, and research into risk assessment and vulnerability analysis to ensure greater system safety. A key issue is the proportionate additional resources directed at public and private sector specific priorities. Agencies that have the scientific and technological ability to leverage resources, exploit integrated science approaches, focus on interdisciplinary practices, utilize informatics expertise and employ a wide use of evolving technologies should play a key role in water security and related issues.

Disaster Advances↗

USGS2017

USGS microbiome research

Microbiomes are the communities of microorganisms (for example, bacteria, viruses, and fungi) that live on, in, and around people, plants, animals, soil, water, and the atmosphere. Microbiomes are active in the functioning of diverse ecosystems, for instance, by influencing water quality, nutrient acquisition and stress tolerance in plants, and stability of soil and aquatic environments. Microbiome research conducted by the U.S. Geological Survey spans many of our mission areas. Key research areas include water quality, understanding climate effects on soil and permafrost, ecosystem and wildlife health, invasive species, contaminated environments to improve bioremediation, and enhancing energy production. Microbiome research will fundamentally strengthen the ability to address the global challenges of maintaining clean water, ensuring adequate food supply, meeting energy needs, and preserving human and ecosystem health.

Fact Sheet↗

USGS2017

A seasonal and spatial comparison of metals, and stable carbon and nitrogen isotopes, in Chincoteague Bay and the marsh deposits of Assateague Island and the adjacent vicinity, Maryland and Virginia

After Hurricane Sandy, scientists from the U.S. Geological Survey, St. Petersburg Coastal and Marine Science Center conducted a seasonal collection of estuarine, marsh, and sandy overwash surface sediments from Chincoteague Bay, Tom’s Cove, and the surrounding Assateague Island and Delmarva Peninsula in March–April and October 2014. Surplus surface sediment was analyzed for metals, percent carbon and nitrogen, δ 13 C, and δ 15 N as part of a complementary U.S. Geological Survey Coastal and Marine Geology Program Sea-level and Storm Impacts on Estuarine Environments and Shorelines project study. The geochemical subsample analyzed for metals and stable isotopes at each site may be used for comparison with past data sets, to create a modern baseline of the natural distribution of the area, to understand seasonal variability as it relates to the health of the local environment, and to assess marsh-to-bay interactions. The use of metals, stable carbon, and stable nitrogen isotopes allows for a more cohesive snapshot of factors influencing the environment and could aid in tracking environmental change. This report serves as an archive for chemical data derived from the surface sediment. Data are available for a seasonal comparison between the March–April 2014 and October 2014 sampling trips. Downloadable data are available as Microsoft Excel spreadsheets. These additional files include formal Federal Geographic Data Committee metadata ( data downloads ).

Maryland, Virginia↗

USGS2020

Compounds of emerging concern detected in water samples from potable water and wastewater treatment plants and detected in water and bed-sediment samples from sites on the Trinity River, Dallas, Texas, 2009–13

The population in the Dallas-Fort Worth metropolitan area in northern Texas is rapidly growing, resulting in a rapid increase in the demand for potable water and an increase in the discharge of wastewater treatment plant effluent. An assessment of compounds of emerging concern (CECs) in samples collected at potable water and wastewater treatment plants in Dallas and downstream from Dallas in the Trinity River was completed by the U.S. Geological Survey in cooperation with the City of Dallas, Dallas Water Utilities. CECs are synthetic or naturally occurring chemicals that are not commonly monitored in the environment but can enter the environment and cause known or suspected adverse ecological or human health effects. CECs can enter the environment through nonpoint sources (for example, runoff) and point sources (for example, concentrated animal feeding operations and treated-effluent discharge from wastewater treatment plants), which can increase concentrations of CECs especially in highly populated areas. CECs include pharmaceuticals (prescription and nonprescription), steroidal hormones, stanols, sterols, detergents and detergent metabolites (hereinafter referred to as “detergents”), personal-use products, pesticides, polycyclic aromatic hydrocarbons (PAHs), flame retardants, plasticizers, and other organic compounds used in everyday domestic, agricultural, and industrial applications. The release of CECs to the environment went largely unrecognized until relatively recently. Increased loading of certain CECs to the environment, combined with advancements in laboratory analysis methods that resulted in appreciably lower detection levels, brought greater attention to the release of CECs. In addition, synthesis of new chemicals or changes in use and disposal of existing chemicals can create new sources of CECs. Some CECs are endocrine disrupting compounds (EDCs), which can elicit adverse effects on development, behavior, and reproduction of wildlife and can cause dysfunction of human and wildlife endocrine (hormone) systems. Results of studies in the United States and Europe indicate that CECs, their metabolites, and industrial, agricultural, and household wastewater products are present in the aquatic environment, water treatment plants, and septic systems. CECs, especially pharmaceuticals, are of interest because of their persistence, widespread use, and potential to cause adverse effects in humans and nontargeted organisms. There is also concern that some CECs and EDCs resist degradation of water treatment processes at potable water treatment plants (PWTPs) and wastewater treatment plants (WWTPs) and that treated-effluent discharge could contain compounds that negatively affect biota living in receiving waters. Therefore, CECs and EDCs are more likely to be detected in environmental samples collected near areas of high population density where treated effluent from WWTPs can contribute substantially to receiving waters. The U.S. Geological Survey, in cooperation with the City of Dallas, Dallas Water Utilities, evaluated the occurrence and concentrations of selected CECs in samples collected at PWTPs and WWTPs in Dallas and downstream from the Dallas-Fort Worth metropolitan area in the Trinity River, Texas, from August 2009 to December 2013. Water samples were collected at three PWTP sites, two WWTP sites, and five study sites on the Trinity River; all sites where samples were collected were in or downstream from Dallas. These water samples were analyzed for 120 CECs, including human-health pharmaceuticals (prescription and nonprescription), antibiotics, steroidal hormones, stanols, sterols, detergents, personal-use products (flavors and fragrances), pesticides and repellents, industrial wastewater compounds, disinfection compounds, PAHs, flame retardants, and plasticizers. Additionally, bed-sediment samples were collected at each of the five Trinity River sites. The bed-sediment samples were analyzed for 57 CECs. In general, the water treatment processes at PWTPs and WWTPs were effective at reducing detections and concentrations of CECs to undetectable levels or transforming the compounds into degradates that were not analyzed. There were 14 and 73 CECs detected in raw water and in untreated-influent water at PWTPs and WWTPs, respectively. Of these, 11 of the 14 CECs detected in raw-water samples and 44 of the 73 CECs detected in untreated-influent samples were not detected in finished water or in treated-effluent water samples, respectively, indicating that these compounds were removed or degraded to compounds that were not analyzed. Some CECs, however, are resistant to degradation and were detected in untreated and treated water at PWTPs and at WWTPs. The three CECs detected at PWTPs in raw-water and finished-water samples were tris(dichloroisopropyl)phosphate, benzophenone, and methyl salicylate. At WWTPs, 29 CECs were detected, including carbamazepine, sulfamethoxazole, 4-androstene-3,17- dione , 3-beta-coprostanol, acetyl-hexamethyl-tetrahydronaphthalene (AHTN), hexahydro-hexamethyl-cyclopenta-benzopyran (HHCB), 1,4-dichlorobenzene, tribromomethane, benzophenone, and tris(dichloroisopropyl)phosphate, in untreated and treated water, indicating that treatment processes likely did not remove or degrade these compounds. Of the 23 CECs detected in stream-water samples collected at 5 sites on the Trinity River in or near Dallas, 10 CECs (carbamazepine, sulfamethoxazole, caffeine, 3-beta-coprostanol, cholesterol, HHCB, benzophenone, triethyl citrate, tributyl phosphate, and tris(dichloroisopropyl)phosphate) were detected at all 5 sites. The 10 CECs detected in water samples collected at all 5 sites on the Trinity River were also detected in treated-effluent water at WWTPs. Eleven of the 57 targeted CECs were detected in bed-sediment samples collected at study sites on the Trinity River. Of these 11 CECs, only 2 (beta-sitosterol and cholesterol) were detected in bed-sediment samples at all 5 sites on the Trinity River. Nine of these 11 CECs were not detected in any water-column sample, likely because of the strong hydrophobic characteristics of these compounds. Results from water treatment plants indicate that the water treatment process is less effective for removing or degrading compounds that are engineered to be resistant to degradation. These results also indicate the presence of CECs and EDCs at locations upstream from PWTPs in Dallas. Results from Trinity River main-stem sites indicate that some compounds are naturally attenuated during transport, but a few are persistent throughout the study reach. Many CECs and EDCs are hydrophobic and were only detected in bed sediment, indicating multiple pathways through which CECs can persist in the environment. In general, concentrations of CECs in the Dallas-Fort Worth metropolitan area were similar to those found in metropolitan areas nationwide.

Texas↗