SEARCH · Geology Reports

Results for “Earth Science Series”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9Linked to original sources

USGS2010

EAARL Coastal Topography-Chandeleur Islands, Louisiana, 2010: Bare Earth

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) and submerged topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the Chandeleur Islands, acquired March 3, 2010. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗

USGS2010

EAARL Coastal Topography-Mississippi and Alabama Barrier Islands, Post-Hurricane Gustav, 2008

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the Mississippi and Alabama barrier islands, acquired post-Hurricane Gustav (September 2008 hurricane) on September 8, 2008. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗

USGS1986

Jabal Silsilah tin prospect, Najd region, Kingdom of Saudi Arabia

A significant Sn deposit at Jabal Silsilah (26°07′N, 42°41′E), a prominent ring complex in the NE Arabian Shield, is associated with greisen in flat-topped cupolas of a highly evolved, zinnwaldite- and topaz-bearing alkali-feldspar granite. This granite is peraluminous, enriched in incompatible trace elements and characterized by a chondrite-normalized REE profile showing a large negative Eu anomaly, but otherwise flat. It is overlain by a carapace of aplite and pegmatite, beneath which accumulated residual fluids caused greisenization and deposition of disseminated cassiterite. Quartz—wolframite veins cut both granite and carapace. The other components of the Silsilah complex, from oldest to youngest, are: alkaline dacite, peralkaline granite and hypabyssal rocks. Their occurrence in a single ring structure and geochemical affinities indicate that they comprise a differentiation series. Fractionation of sodic plagioclase, apatite and Fe and Ti oxides resulted in parental alkaline dacite magma becoming peralkaline and granitic. Subsequent fractionation of alkali feldspar, soda pyribole and zircon resulted in a peraluminous melt enriched in incompatible trace elements.

Journal of African Earth Sciences↗

USGS2000

Follow-ons to the KidSAT/EarthKAM student remote sensing program

The KidSAT/EarthKAM program is a NASA educational initiative that allows students to develop and operate a remote sensing space program. The first phase of the program consisted of a student developed camera that is flown on Space Shuttle missions in the nadir window. A network of students develop a series of image acquisition requests, based on approved science proposals, that are combined into a set of instrument commands that are uplinked to the space shuttle. Acquired images are downlinked and archived for student access in completing their research. The International Space Station provides a unique platform for the next generation of KidSAT/EarthKAM instruments, which will allow more students to participate in the program and enable development of more sophisticated instruments. Follow-on instruments consist of Earth-looking multispectral digital sensors mounted in the optical window and on the express pallet, and radar instruments located on the express pallet. Use of the International Space Station will allow routine data acquisition and enable the instrument to be part of regular science curricula unconstrained by the Space Shuttle launch schedule.

Conference Paper↗

USGS2011

Rapid cooling rates at an active mid-ocean ridge from zircon thermochronology

Oceanic spreading ridges are Earth's most productive crust generating environment, but mechanisms and rates of crustal accretion and heat loss are debated. Existing observations on cooling rates are ambiguous regarding the prevalence of conductive vs. convective cooling of lower oceanic crust. Here, we report the discovery and dating of zircon in mid-ocean ridge dacite lavas that constrain magmatic differentiation and cooling rates at an active spreading center. Dacitic lavas erupted on the southern Cleft segment of the Juan de Fuca ridge, an intermediate-rate spreading center, near the intersection with the Blanco transform fault. Their U–Th zircon crystallization ages (29.3 − 4.6 + 4.8 ka; 1σ standard error s.e.) overlap with the (U–Th)/He zircon eruption age (32.7 ± 1.6 ka) within uncertainty. Based on similar 238 U− 230 Th disequilibria between southern Cleft dacite glass separates and young mid-ocean ridge basalt (MORB) erupted nearby, differentiation must have occurred rapidly, within ~ 10–20 ka at most. Ti-in-zircon thermometry indicates crystallization at 850–900 °C and pressures > 70–150 MPa are calculated from H 2 O solubility models. These time-temperature constraints translate into a magma cooling rate of ~ 2 × 10 − 2 °C/a. This rate is at least one order-of-magnitude faster than those calculated for zircon-bearing plutonic rocks from slow spreading ridges. Such short intervals for differentiation and cooling can only be resolved through uranium-series ( 238 U– 230 Th) decay in young lavas, and are best explained by dissipating heat convectively at high crustal permeability.

Juan de Fuca ridge and the Blanco transform fault ↗

USGS1998

Teaching earth science

This CD-ROM contains 17 teaching tools: 16 interactive HyperCard 'stacks' and a printable model. They are separated into the following categories: Geologic Processes, Earthquakes and Faulting, and Map Projections and Globes. A 'navigation' stack, Earth Science, is provided as a 'launching' place from which to access all of the other stacks. You can also open the HyperCard Stacks folder and launch any of the 16 stacks yourself. In addition, a 17th tool, Earth and Tectonic Globes, is provided as a printable document. Each of the tools can be copied onto a 1.4-MB floppy disk and distributed freely.

Data Series↗

USGS1969

Dilemma posed by uranium-series dates on archaeologically significant bones from Valsequillo, Puebla, Mexico

In an attempt to date stone artifacts of Early Man excavated from several sites at the Valsequillo Reservoir, a few kilometers south of Puebla, Mexico, Szabo applied the uranium-series method on bone samples known to be either from the same geologic formation as the sites or in direct association with the artifacts. The geologic context of the bones was studied by Malde, and the archaeological sites were excavated by Irwin-Williams. A date determined for bone associated with an artifact (Caulapan sample M-B-6, see below) agrees with a radiocarbon date for fossil mollusks in the same bed and indicates man's presence more than 20 000 years ago. However, some of these bone dates exceed 200 000 years. Because such dates for man in North America conflict with all prior archaeological evidence here and abroad, we are confronted by a dilemna — either to defend the dates against an onslaught of archaeological thought, or to abandon the uranium method in this application as being so much wasted effort. Faced with these equally undesirable alternatives, and unable to decide where the onus fairly lies (if a choice must be made), we give the uranium-series dates as a possible stimulus for further mutual work in isotopic dating of archaeological material. A sample from the Lindenmeier archaeological site north of Fort Collins and another from a Pleistocene terrace along the Arkansas River, both in Colorado, were also dated.

Puebla↗

USGS2010

An overview of the Landsat Data Continuity Mission

The Landsat Data Continuity Mission (LDCM) is the follow-on mission to Landsat 7 and will be the eighth mission in the Landsat series. The mission is in development via an interagency partnership between the National Aeronautics and Space Administration (NASA) and the Department of Interior (DOI) / United States Geological Survey (USGS). The LDCM satellite will carry two earth-observing sensors, the Operational Land Imager (OLI) to collect image data for nine spectral bands in the reflective portion of the spectrum and the Thermal Infrared Sensor (TIRS) to collect coincident image data for two thermal spectral bands. The LDCM ground segment will control the satellite and will receive, process, archive, and distribute the science data collected by the OLI and TIRS instruments. The USGS Earth Resources Observation & Science Center (EROS) will distribute LDCM data products at no cost to requestors. The mission objective is to continues the Landsat program's collection, archive, and distribution of multispectral imagery affording global, synoptic, and repetitive coverage of the Earth's land surfaces at a scale where natural and human-induced changes can be detected, differentiated, characterized, and monitored over time. The LDCM launch readiness date is currently December, 2012.

Conference Paper↗

USGS1995

Earth science photographs from the U.S. Geological Survey Library

This CD-ROM set contains 1,500 scanned photographs from the U.S. Geological Survey Library for use as a photographic glossary of elementary geologic terms. Scholars are encouraged to copy these public domain images into their reports or databases to enhance their presentations. High-quality prints and (or) slides are available upon request from the library. This CD-ROM was produced in accordance with the ISO 9660 standard; however, it is intended for use on DOS-based computer systems only.

Data Series↗

USGS2013

Geodatabase compilation of hydrogeologic, remote sensing, and water-budget-component data for the High Plains aquifer, 2011

The High Plains aquifer underlies almost 112 million acres in the central United States. It is one of the largest aquifers in the Nation in terms of annual groundwater withdrawals and provides drinking water for 2.3 million people. The High Plains aquifer has gained national and international attention as a highly stressed groundwater supply primarily because it has been appreciably depleted in some areas. The U.S. Geological Survey has an active program to monitor the changes in groundwater levels for the High Plains aquifer and has documented substantial water-level changes since predevelopment: the High Plains Groundwater Availability Study is part of a series of regional groundwater availability studies conducted to evaluate the availability and sustainability of major aquifers across the Nation. The goals of the regional groundwater studies are to quantify current groundwater resources in an aquifer system, evaluate how these resources have changed over time, and provide tools to better understand a systems response to future demands and environmental stresses. The purpose of this report is to present selected data developed and synthesized for the High Plains aquifer as part of the High Plains Groundwater Availability Study. The High Plains Groundwater Availability Study includes the development of a water-budget-component analysis for the High Plains completed in 2011 and development of a groundwater-flow model for the northern High Plains aquifer. Both of these tasks require large amounts of data about the High Plains aquifer. Data pertaining to the High Plains aquifer were collected, synthesized, and then organized into digital data containers called geodatabases. There are 8 geodatabases, 1 file geodatabase and 7 personal geodatabases, that have been grouped in three categories: hydrogeologic data, remote sensing data, and water-budget-component data. The hydrogeologic data pertaining to the northern High Plains aquifer is included in three separate geodatabases: (1) base data from a groundwater-flow model; (2) hydrogeology and hydraulic properties data; and (3) groundwater-flow model data to be used as calibration targets. The remote sensing data for this study were developed by the U. S. Geological Survey Earth Resources Observation and Science Center and include historical and predicted land-use/land-cover data and actual evapotranspiration data by using remotely sensed temperature data. The water-budget-component data contains selected raster data from maps in the “Selected Approaches to Estimate Water-Budget Components of the High Plains, 1940 Through 1949 and 2000 Through 2009” report completed in 2011 ( http://pubs.usgs.gov/sir/2011/5183/ ). Federal Geographic Data Committee compliant metadata were created for each spatial and tabular data layer in the geodatabases.

Colorado, Kansas, Nebraska, New Mexico, Oklahoma, ↗

USGS2014

Monitoring conterminous United States (CONUS) land cover change with Web-Enabled Landsat Data (WELD)

Forest cover loss and bare ground gain from 2006 to 2010 for the conterminous United States (CONUS) were quantified at a 30 m spatial resolution using Web-Enabled Landsat Data available from the USGS Center for Earth Resources Observation and Science (EROS) (http://landsat.usgs.gov/WELD.php). The approach related multi-temporal WELD metrics and expert-derived training data for forest cover loss and bare ground gain through a decision tree classification algorithm. Forest cover loss was reported at state and ecoregional scales, and the identification of core forests' absent of change was made and verified using LiDAR data from the GLAS (Geoscience Laser Altimetry System) instrument. Bare ground gain correlated with population change for large metropolitan statistical areas (MSAs) outside of desert or semi-desert environments. GoogleEarth™ time-series images were used to validate the products. Mapped forest cover loss totaled 53,084 km2 and was found to be depicted conservatively, with a user's accuracy of 78% and a producer's accuracy of 68%. Excluding errors of adjacency, user's and producer's accuracies rose to 93% and 89%, respectively. Mapped bare ground gain equaled 5974 km2 and nearly matched the estimated area from the reference (GoogleEarth™) classification; however, user's (42%) and producer's (49%) accuracies were much less than those of the forest cover loss product. Excluding errors of adjacency, user's and producer's accuracies rose to 62% and 75%, respectively. Compared to recent 2001–2006 USGS National Land Cover Database validation data for forest loss (82% and 30% for respective user's and producer's accuracies) and urban gain (72% and 18% for respective user's and producer's accuracies), results using a single CONUS-scale model with WELD data are promising and point to the potential for national-scale operational mapping of key land cover transitions. However, validation results highlighted limitations, some of which can be addressed by improving training data, creating a more robust image feature space, adding contemporaneous Landsat 5 data to the inputs, and modifying definition sets to account for differences in temporal and spatial observational scales. The presented land cover extent and change data are available via the official WELD website (ftp://weldftp.cr.usgs.gov/CONUS_5Y_LandCover/ftp://weldftp.cr.usgs.gov/CONUS_5Y_LandCover/).

Remote Sensing of Environment↗

USGS2006

Deep seismic sounding in northern Eurasia

For nearly 40 years, the former Soviet Union has carried out an extensive program of seismic studies of the Earth's crust and upper mantle, known as “Deep Seismic Sounding” or DSS [ Piwinskii , 1979; Zverev and Kosminskaya , 1980; Egorkin and Pavlenkova , 1981; Egorkin and Chernyshov , 1983; Scheimer and Borg , 1985]. Beginning in 1939–1940 with a series of small-scale seismic experiments near Moscow, DSS profiling has broadened into a national multiinstitutional exploration effort that has completed almost 150,000 km of profiles covering all major geological provinces of northern Eurasia [Ryaboy, 1989].

Eos, Earth and Space Science News↗

USGS1993

International strategic minerals inventory summary report; niobium (columbium) and tantalum

Major world resources of niobium and tantalum are described in this summary report of information in the International Strategic Minerals Inventory (ISMI). ISMI is a cooperative data-collection effort of earth-science and mineral-resource agencies in Australia, Canada, the Federal Republic of Germany, the Republic of South Africa, the United Kingdom, and the United States of America. Part I of this report presents an overview of the resources and potential supply of niobium and tantalum based on inventory information; Part II contains tables of both geologic and mineral-resource information and includes production data collected by ISMI participants. Niobium is used principally as an alloying element in special steels and superalloys, and tantalum is used mainly in electronics. Minerals in the columbite-tantalite series are principal ore minerals of niobium and tantalum. Pyrochlore is a principal source of niobium. These minerals are found in carbonatite, certain rocks in alkaline igneous complexes, pegmatite, and placer deposits. ISMI estimates show that there are over 7 million metric tons of niobium and almost 0.5 million metric tons of tantalum in known deposits, outside of China and the former Soviet Union, for which reliable estimates have been made. Brazilian deposits, followed by Canadian deposits, contain by far the largest source of niobium. Tantalum production is spread widely among several countries, and Brazil and Canada are the most significant of these producers. Brazil's position is further strengthened by potential byproduct columbite from tin mining. Present economically exploitable resources of niobium appear to be sufficient for the near future, but Brazil will continue to be the predominant world supplier of ferrocolumbium. Tantalum, a byproduct of tin production, has been captive to the fluctuations of that market, but resources in pegmatite in Canada and Australia make it likely that future increases in the present modest demand will be met.

Circular↗

USGS2014

Landsat: Sustaining earth observations beyond Landsat 8

The Landsat series of Earth-observing satellites began 41-years ago as a partnership between the U.S. Geological Survey (USGS) of the Department of the Interior (DOI) and The National Aeronautics and Space Administration (NASA). For the past 41 years, Landsat satellites and associated U.S. Government ground processing, distribution, and archiving systems have acquired and made available global, moderate-resolution, multispectral measurements of land and coastal regions, providing humankind’s longest record of our planet from space. Landsat information is truly a national asset, providing an important and unique capability that benefits abroad community, including Federal, state, and local governments; globalchange science; academia, and the private sector.

Photogrammetric Engineering and Remote Sensing↗

USGS2020

Does Lake Erie still have sufficient oxythermal habitat for cisco Coregonus artedi ?

In Lake Erie, cisco Coregonus artedi once supported one of the most valuable freshwater fisheries on earth, yet overfishing caused their eventual extirpation from the lake. With warming lake temperatures, some have questioned whether Lake Erie still contains suitable oxythermal conditions for cisco. Using published oxythermal thresholds for cisco and oxythermal profiles from Lake Erie, we sought to answer two questions critical to cisco restoration science. First, is cisco habitat still available during the most restrictive periods? Second, what is the distribution of cisco habitat during these times? Beta regression was used to determine that cisco habitat was most limited during the month of August, and that August of 2010 was the most restrictive period in the time series. We then used Empirical Bayesian Kriging (EBK) to map the spatial extent of cisco habitat during these times. EBK maps revealed large areas of summer refugia for cisco in Lake Erie, even during the least favorable periods. Most of the Central and East Basins contain suitable habitat during the average August, yet during August of 2010, suitable conditions were limited to the eastern edge of the Central Basin and the deep waters of the East Basin. These findings align well with historical accounts of cisco landings. While suitable oxythermal habitat still exists for cisco in Lake Erie, future restoration efforts, if attempted, will partially depend on: 1) better management of nutrient inputs, 2) the realization of future climate scenarios, and 3) the ability of cisco to adapt to a changing lake.

Lake Erie↗

USGS2023

Historical Structure from Motion (HSfM): Automated processing of historical aerial photographs for long-term topographic change analysis

Precisely measuring the Earth’s changing surface on decadal to centennial time scales is critical for many science and engineering applications, yet long-term records of quantitative landscape change are often temporally and geographically sparse. Archives of scanned historical aerial photographs provide an opportunity to augment these records with accurate elevation measurements that capture the historical state of the Earth surface. Structure from Motion (SfM) photogrammetry workflows produce high-quality digital elevation models (DEMs) and orthoimage mosaics from these historical images, but time-intensive tasks like manual image preprocessing (e.g., fiducial marker identification) and ground control point (GCP) selection impede processing at scale. We developed an automated method to process historical images and generate self-consistent time series of high-resolution (0.5–2 m) DEMs and orthomosaics, without manual GCP selection. The method relies on SfM to correct camera interior and exterior orientation and a robust multi-stage co-registration approach using modern reference terrain datasets for geolocation refinement. We demonstrate the method using scanned images from the North American Glacier Aerial Photography (NAGAP) archive collected between 1967 and 1997. We present results for two sites with variable photo acquisition geometry and overlap — Mount Baker and South Cascade Glacier in Washington State, USA. The automated method corrects initial camera position errors of several kilometers and produces accurately georeferenced, high-resolution DEMs and orthoimages, regardless of camera configuration, acquisition geometry, terrain characteristics, and reference DEM properties. The average RMS reprojection error following bundle adjustment optimization was 0.67 px (0.15 m) for the 261 images contributing to 10 final DEM mosaics between 1970 and 1992 at Mount Baker, and 0.65 px (0.13 m) for the 243 images contributing to 18 individual DEMs between 1967 and 1997 at South Cascade Glacier. The relative accuracy of elevation values in the historical time series stacks was 0.68 m at Mount Baker and 0.37 m at South Cascade Glacier. Our products have reduced systematic error and improved accuracy compared to DEM products generated using SfM with manual GCP selection. Final elevation change measurement precision was ∼ "> ∼ 0.7–1.0 m over a 30-year period, enabling the study of processes with rates as low as ∼ "> ∼ 1-3 cm/yr. Our results demonstrate the potential of this scalable method to rapidly process archives of historical imagery and deliver new quantitative insights on long-term geodetic change and Earth surface processes.

Washington↗

USGS2016

The road to Yucca Mountain—Evolution of nuclear waste disposal in the United States

The generation of electricity by nuclear power and the manufacturing of atomic weapons have created a large amount of spent nuclear fuel and high-level radioactive waste. There is a world-wide consensus that the best way to protect mankind and the environment is to dispose of this waste in a deep geologic repository. Initial efforts focused on salt as the best medium for disposal, but the heat generated by the radioactive waste led many earth scientists to examine other rock types. In 1976, the director of the U.S. Geological Survey (USGS) wrote to the U.S. Energy Research and Development Administration (ERDA), predecessor agency of the U.S. Department of Energy (DOE), suggesting that there were several favorable environments at the Nevada Test Site (NTS), and that the USGS already had extensive background information on the NTS. Later, in a series of communications and one publication, the USGS espoused the favorability of the thick unsaturated zone. After the passage of the Nuclear Waste Policy Act (1982), the DOE compiled a list of nine favorable sites and settled on three to be characterized. In 1987, as the costs of characterizing three sites ballooned, Congress amended the Nuclear Waste Policy Act directing the DOE to focus only on Yucca Mountain in Nevada, with the proviso that if anything unfavorable was discovered, work would stop immediately. The U.S. DOE, the U.S. DOE national laboratories, and the USGS developed more than 100 detailed plans to study various earth-science aspects of Yucca Mountain and the surrounding area, as well as materials studies and engineering projects needed for a mined geologic repository. The work, which cost more than 10 billion dollars and required hundreds of man-years of work, culminated in a license application submitted to the U.S. Nuclear Regulatory Commission (NRC) in 2008.

Environmental & Engineering Geoscience↗

USGS2021

Semi-centennial of Landsat observations and pending Landsat 9 launch

The first Landsat was placed in orbit on 23 July 1972, followed by a series of missions that have provided nearly continuous, two-satellite 8-day repeat image coverage of the Earth’s land areas for the last half-century. These observations have substantially enhanced our understanding of the Earth’s terrestrial dynamics, both as a major element of the Earth’s physical system, the primary home of humans, and the major source of natural resources that support them. The history of Landsat is complex, reflective of the human systems that sustain it. Despite the conflicted perspectives surrounding the continuation of the program, Landsat has survived based on worldwide recognition of its critical contributions to understanding land dynamics, management of natural resources and Earth system science. Launch of Landsat 9 is anticipated in Fall 2021, and current planning for the next generation, Landsat Next is well underway. The community of Landsat data users is looking forward to another 50 years of the Landsat program.

Photogrammetric Engineering and Remote Sensing (PE↗