Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Remote Sensing of Environment”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,659 records · Page 89Linked to original sources
USGS2024

Simulating present and future groundwater/surface-water interactions and stream temperatures in Beaver Creek, Kenai Peninsula, Alaska

In many places, coldwater ecosystems are facing increasing pressure from anthropogenic warming. This study examined stream temperatures and the water balance in the Beaver Creek watershed on the Kenai Peninsula in south-central Alaska—an area that is experiencing rapid warming. Low-gradient streams near the Kenai coast provide important spawning and rearing habitat for salmon but may be especially vulnerable to rising temperatures, because of long residence times, inflows from abundant riparian wetlands, and reliance on groundwater discharge that may also warm, or decrease in volume with rising evapotranspiration. In recent decades, observed maximum 7-day temperatures have consistently exceeded statistical (regression-based) projections. Here we simulate total streamflows and temperatures with a physics-based model that links the Soil Water Balance, MODFLOW 6 and SNTEMP simulation codes on a 7-day timestep. The model is based on existing data and groundwater levels, instream flows, and stream temperatures collected during 2019–23. Future climate scenarios were developed for 2023–50 from downscaled climate projections. Results indicate that groundwater discharge is about 64 percent of the total streamflow during the months of May through September. Total streamflow and groundwater discharge are expected to remain similar to current conditions through 2050. Stream temperatures are expected to rise; by midcentury, near the Beaver Creek mouth the model predicts 34 to 63 additional days per year with average weekly temperatures above 13 degrees Celsius, 14 to 81 additional days with average weekly temperatures above 15 degrees Celsius, and routine exceedances of 20 degrees Celsius during the warmest periods. Projected stream temperatures vary spatially. Areas of high groundwater inflows in the lower main stem and some tributaries may be most resilient to warming air temperatures during dry conditions. During storm events, groundwater-dominated tributaries may have the coolest stream temperatures.

Alaska↗
USGS2024

Flood-inundation maps for the Cuyahoga River at Jaite, Ohio, 2024

Digital flood-inundation maps for a nearly 6-mile reach of the Cuyahoga River at Jaite, Ohio, were created by the U.S. Geological Survey (USGS) in cooperation with the Northeast Ohio Regional Sewer District Board of Trustees. The maps depict estimates of the extent and depth of flooding corresponding to selected water levels (stages) at USGS streamgage 04206425 on the Cuyahoga River at Jaite, Ohio. Water-surface profiles were computed for the stream reach by using a one-dimensional steady-state step-backwater model. The hydraulic model was calibrated to the current USGS streamgage data and then used to compute 15 water-surface profiles for flood stages at 1-foot intervals referenced to the streamgage datum and ranging from 6 to 20 feet, which correspond to below “action stage” to “major flood stage” as reported by the National Weather Service. The simulated water-surface profiles were then used with a geographic information system digital elevation model derived from light detection and ranging data to delineate the areas flooded at each stage. These maps, along with current stage data from the USGS streamgage and forecasted high-flow stages from the National Weather Service, can provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for postflood recovery efforts.

Ohio↗
USGS2024

Field observations and logs from the Rose Hip trench exposure across a north-facing scarp within the Seattle Fault Zone, southern Bainbridge Island, Washington

The Seattle Fault Zone is an approximately 70-km-long, east-west-trending zone of south-dipping blind reverse faults within the Puget lowland region in Washington. Because of the proximity, the Seattle Fault Zone poses a significant earthquake hazard to the Puget sound and Seattle metropolitan regions. We present preliminary mapping and trench-site information from a paleoseismic investigation across a newly identified active fault scarp located within the hanging wall of the Seattle Fault Zone on southern Bainbridge Island, Washington. The trench exposed monoclinally folded Miocene bedrock, fractured and faulted glacial-related deposits, and laminated lacustrine deposits capped by slope-derived colluvium. The observations from this investigation record late Pleistocene to Holocene north-vergent folding and faulting along this new fault scarp.

Washington↗
USGS1990

Preconditioned Conjugate-Gradient 2 (PCG2), a computer program for solving ground-water flow equations

This report documents PCG2: a numerical code to be used with the U.S. Geological Survey modular three-dimensional, finite-difference, ground-water flow model. PCG2 uses the preconditioned conjugate-gradient method to solve the equations produced by the model for hydraulic head. Linear or nonlinear flow conditions may be simulated. PCG2 includes two reconditioning options: modified incomplete Cholesky preconditioning, which is efficient on scalar computers; and polynomial preconditioning, which requires less computer storage and, with modifications that depend on the computer used, is most efficient on vector computers. Convergence of the solver is determined using both head-change and residual criteria. Nonlinear problems are solved using Picard iterations. This documentation provides a description of the preconditioned conjugate gradient method and the two preconditioners, detailed instructions for linking PCG2 to the modular model, sample data inputs, a brief description of PCG2, and a FORTRAN listing.

Water-Resources Investigations Report↗
USGS2024

Potential climate and human water-use effects on water-quality trends in a semiarid, western U.S. watershed: Fountain Creek, Colorado, USA

Nutrients, total dissolved solids (TDS), and trace elements affect the suitability of water for human and natural needs. Here, trends in such water-quality constituents are analyzed for 1999–2022 for eight nested monitoring sites in the 24,000 km 2 Fountain Creek watershed in Colorado, USA, by using the weighted regressions on time, discharge, and season (WRTDS) methodology. Fountain Creek shares characteristics with other western U.S. watersheds: (1) an expanding but more water-efficient population, (2) a heavy reliance on imported water, (3) a semiarid climate trending towards warmer and drier conditions, and (4) shifts of water from agricultural to municipal uses. The WRTDS analysis found both upward and downward trends in the concentrations of nutrients that reflected possible shifts in effluent management, instream uptake, and water conservation by a watershed population that grew by about 40%. Selenium, other trace elements, and TDS can pose water-quality challenges downstream and their concentrations were found to have a downwards trend. Those trends could be driven by either a warming and drying of the local climate or decreased agricultural irrigation, as both would reduce recharge and subsequent mobilization from natural geologic sources via groundwater discharge. The patterns illustrate how changes in climate and water use may have affected water quality in Fountain Creek and demonstrate the patterns to look for in other western watersheds.

Colorado↗
USGS2026

Special issue “The 2024 M7.6 Noto Peninsula earthquake and seismic swarm”

The 2024 Mw7.5 (M JMA 7.6) Noto Peninsula earthquake struck the Noto Peninsula, central Japan on January 1, 2024, causing widespread damage. This Mw7.5 mainshock, together with the prolonged seismic swarm that persisted in the northeastern Noto Peninsula since the end of 2020, of which the largest event was the 2023 M JMA 6.5 earthquake, constitutes one of the most significant seismic sequences in Japan in recent decades. The sequence provides a rare opportunity to investigate the complex interplay among swarm activity, fluid migration, fault geometry and distribution, and the preparatory conditions required for a large inland crustal earthquake. Motivated by this scientific context, this special issue brings together studies examining the sequence from diverse disciplinary perspectives, incorporating seismic, geodetic, and tsunami-related observations and modelling.

Noto Peninsula↗
USGS2025

Anomalous shear stress variation in wet granular medium: Implications for landslide lateral faults

Landslide assessments typically focus on the mechanical properties of the basal shear zone, but lateral faults are frequently overlooked, possibly due to their lower normal stresses and variably saturated conditions. Using double-cylinder shear experiments on wet granular systems as analogs for landslide lateral faults, we observe anomalous shear stress variations with fluid volume fractions, defying an expected unimodal relationship associated with capillary cohesion. At low fluid volume fractions, shear strength weakens as the wet grain assembly experiences reduced lateral pressure and increased boundary slip. This boundary slip subsequently vanishes, with an abrupt strengthening due to the dilation of the grain assembly against fluid surface tension as saturation approaches. Strike-slip motion and confinement in this system explain the strength anomaly, highlighting a critical role of lateral faults in landslide stability, particularly in cases where dynamics cannot be adequately explained by monitored pore-water pressure or basal friction.

Geophysical Research Letters↗
USGS2026

Cnidarian–algal partnerships structure bacterial communities during strobilation in Cassiopea xamachana

Cnidarian–algal (Symbiodiniaceae) symbioses rely on complex interactions among the cnidarian host, algal symbionts, and associated bacterial communities. In the upside-down jellyfish Cassiopea xamachana , the polyp-to-medusa transition (strobilation) requires the establishment of symbiosis with Symbiodiniaceae algal partners, yet bacterial community dynamics during this developmental process remain unknown. Here, we experimentally induced symbiosis in aposymbiotic polyps using four algal treatments: xenic Symbiodinium microadriaticum (native symbiont), xenic Breviolum minutum , antibiotic-treated B. minutum , and a photosynthetically impaired B. minutum mutant. We combined 16S rRNA gene sequencing with measurements of photosynthetic efficiency, asexual budding, and algal surface N-glycan profiles to characterize holobiont assembly during symbiosis onset and strobilation. Algal treatment structured bacterial communities in both algal cultures and polyp tissues. Our analyses identified a set of amplicon sequence variants that consistently distinguished strobilating polyps from non-strobilating aposymbiotic and mutant polyps, in addition to potential bacterial biomarkers associated with successful metamorphosis. Strobilation was associated with the enrichment of bacterial communities putatively involved in sulfur and nitrogen cycling, whereas non-strobilating aposymbiotic and mutant polyps were characterized by opportunistic bacteria and increased community variability. Together, these results reveal coordinated changes in algal physiology, surface glycan profiles, and bacterial community structure associated with successful strobilation in C. xamachana and support a model in which tripartite host–alga–bacteria interactions influence cnidarian life stage transitions.

ISME Communications↗
USGS2024

Groundwater quality near the Placerita Oil Field, California, 2018

Groundwater-quality data and potential fluid-migration pathways near the Placerita Oil Field in Los Angeles County, California, were examined by the U.S. Geological Survey to determine if oil-field fluids (water and gas from oil-producing and non-producing zones) have mixed with groundwater resources. Six of the 13 new groundwater samples collected for this study contained petroleum hydrocarbons, thermogenic gas, inorganic chemical signatures, and (or) isotopic values consistent with potential mixing with fluids from hydrocarbon-bearing formations. For historical groundwater samples, benzene was the most detected petroleum hydrocarbon. The historical groundwater samples with a benzene concentration greater than 0.5 micrograms per liter were from environmental monitoring wells at industrial or commercial facilities unrelated to oil and gas development that, in many cases, have identified soil or groundwater contamination and were not typically analyzed for other constituents that could provide additional lines of evidence for potential mixing with oil-field fluids. Methane was not detected in any of the 12 historical samples with a reported measurement. Reviewing historical data revealed factors that could potentially adversely affect groundwater quality in the study area. These factors include modified hydraulic gradients caused by large volumes of water extracted from the main production area and reinjected downgradient into nonproducing zones, well-barrier failures in wells constructed in the northern part of the oil field before the 1970s, well-barrier failures in produced-water disposal wells downgradient from the main production area, and naturally occurring hydrocarbons at shallow intervals. The groundwater samples most geochemically similar to samples from hydrocarbon-bearing formations were in areas where hydrocarbons are naturally occurring at shallow intervals and where oil development is at shallow depths. Additional data for hydraulic heads, water quality, and formation temperatures at multiple depths in areas with large injection volumes and well-integrity issues are needed to evaluate whether those factors have contributed to mixing between fluids from oil-producing or injection formations and groundwater resources.

California↗
USGS2025

Reservoir thermal energy storage pre-assessment for the United States

Storing thermal energy underground for later use in electricity production or direct-use heating/cooling is a promising, viable, and economical green energy option. Reservoir thermal energy storage (RTES) is one such option, which stores energy in underutilized permeable strata with low ambient groundwater flow rates and more geochemically evolved (e.g. brackish/saline) waters relative to overlying principal aquifer systems. The U.S. Geological Survey has begun assessing RTES potential nationally by focusing on five generalized geologic regions (Basin and Range, Coastal Plain, Illinois Basin, Michigan Basin, Pacific Northwest) across the United States. Hydrogeologic reservoir models are developed for the following eight metropolitan area cities within those regions to evaluate RTES performance across different climates and subsurface conditions: Albuquerque, New Mexico; Charleston, South Carolina; Chicago and Decatur, Illinois; Lansing, Michigan; Memphis, Tennessee; Phoenix, Arizona; and Portland, Oregon. Evaluated metrics include estimated required well spacing, thermal storage capacity, and thermal recovery efficiency through time. Also considered for each reservoir are potential complicating factors, including reservoir depth, thermally driven free convection, and groundwater salinity. This work focuses on direct-use cooling because the need for cooling modern office buildings greatly exceeds that for heating in most parts of the country (Falta and others, 2016); however, the evaluated metrics are also relevant to heating and electricity applications. Results indicate that favorable RTES conditions exist in each region, with the Coastal Plain and Basin and Range being especially favorable for thermal storage capacity, while the Pacific Northwest and Michigan Basin excel at energy recovery for the evaluated cooling application. The results underscore the utility of developing maps of thermal storage capacity, subsurface temperature models, and volumetric estimates of thermal storage capacity to serve as key RTES resource classification standards. Overall, this pre-assessment provides a basic understanding of RTES potential in several cities and geologic regions throughout the country and will aid ongoing thermal energy storage assessment efforts.

Arizona, Illinois, Michigan, New Mexico, Oregon, S↗
USGS2026

Ice sheet dynamics drive pronounced changes in the subsurface freshwater-saltwater interface

Saltwater is migrating into freshwater aquifers globally with water quality and biogeochemical implications, yet saltwater intrusion in glaciated regions is sparsely investigated. Field observations suggest that groundwater head in glaciated systems is influenced by ice sheet forcings and provides evidence that seawater infiltrated into offshore aquifers during past deglaciation events. To understand links between ice sheet dynamics, groundwater head, and saltwater intrusion, we use numerical models to explore the effects of deglaciation on nearshore head and salinity distributions. We find that ice sheet thinning diminishes groundwater head, and the resulting shift in subsurface pressure gradients drives rapid landward movement of the subsurface freshwater-saltwater interface up to 4.0 km or 1.3 m per m ice sheet loss. Results highlight an overlooked saltwater intrusion mechanism that aligns with field observations and affects glaciated coastlines undergoing ice sheet retreat, underscoring the need to consider this mechanism in studies of contemporary coastal water quality.

Geophysical Research Letters↗
USGS2026

The digital archivist: Automating legacy macroseismic data processing using large language models

Macroseismic data are a key resource to investigate shaking and damage from preinstrumental and early instrumental eras. However, data are often stored as inconsistently formatted reports describing observed shaking and damage, making manually parsing and interpreting accounts labor‐intensive. We introduce a novel workflow using Google’s Gemini 2.5 Pro large language model (LLM) to automate the extraction and structuring of macroseismic observations from summary reports. We apply this workflow to the 22 March 1957 M 5.3 Daly City, California, earthquake as a case study. We used Gemini to extract addresses, originally assigned modified Mercalli intensity values, and descriptions from each report. To address coordinate precision limits, addresses were geocoded via Google’s Geocoding application programming interface. This workflow yielded over 2300 geocoded intensity reports for the Daly City earthquake. We use the geocoded accounts, with the original report intensity assignments, to develop a shaking intensity map that in some respects rivals modern Did You Feel It? Maps. We also extract and present data for the 9 February 1971 M L 6.7 Sylmar, California, earthquake. Our results demonstrate the potential of LLMs for reliably extracting and analyzing large, unstructured macroseismic datasets. LLMs offer a scalable solution for rapidly digitizing macroseismic archives, enabling their broader use to constrain ground‐motion models in modern seismic hazard analysis and to improve our understanding of site effects in urban areas. The concepts explored here may also be applied to the handling of other legacy seismological and earth science data.

Seismological Research Letters↗
USGS1999

Reconfigured-Channel Monitoring and Assessment Program

A U.S. Geological Survey program to monitor and assess channel reconfiguration activity is described. A data base available on the world wide web will enable land-management agencies and other interested parties to evaluate the long-term success of various channel reconfiguration projects. A demonstration project on the Lake Fork of the Gunnison River, Colorado, illustrates the program objectives and approach.

Colorado↗
USGS2025

Updating regional‐scale geospatial liquefaction models with locally available geotechnical data

We present a method to update the geospatial liquefaction model used by the U.S. Geological Survey’s near‐real‐time ground failure product with subsurface geotechnical data. The geospatial model estimates liquefaction probability from peak ground velocity (via ShakeMap) and geospatial susceptibility proxies. In many regions, additional information relevant to constraining liquefaction likelihood is also available, including surface geology maps and subsurface geotechnical measurements. There is currently no mechanism to use these data in the ground failure product liquefaction model, even though these data could provide more precise constraints on spatial variations in the lithologic character of the soil (surface geology) and direct measurements of the subsurface mechanical properties that affect liquefaction occurrence and severity (geotechnical measurements). In this study, we develop a method to integrate these data with the geospatial model and assess how these data can improve regional‐scale predictions. We develop a Bayesian updating framework and apply it to the 1989 magnitude 6.9 Loma Prieta, California, earthquake, for which mapped observations are available to evaluate performance. We constrain the Bayesian framework with 373 Northern California cone penetration tests and liquefaction susceptibility classes based on the mapped surface geology. This Bayesian model incorporates geotechnical information into the geospatial model and more accurately predicts liquefaction occurrences than the geospatial model, while sacrificing less accuracy in terms of predicting the absence of liquefaction than the geotechnical model. In future applications, this approach could be adapted to update other geospatial models using locally available subsurface data.

California↗
USGS2025

Extreme plate boundary localization promotes shallow earthquake slip at the Japan Trench

The 2011 Mw9.1 Tohoku-oki earthquake is exceptional among great earthquakes for having peak slip of ~50-70 m on the shallowest portion of the plate boundary megathrust. International Ocean Discovery Program Expedition 405 drilled multiple holes through the megathrust in the large slip region and at a Pacific Plate input site. The megathrust preferentially develops at the top or base of the pelagic clay in the input section where pronounced contrasts in physical properties are present. This results in a narrow, weak fault located at a major mechanical contact between frontal prism mud and subducted clay. Localization imposed by the input section enhances the tendency for shallow seismic slip, showing the Japan Trench may be more susceptible to ruptures with large shallow slip than margins without weak clays.

Japan Trench↗
USGS2026

Key minerals in energy transmission

The electrical grid relies on minerals with unique properties to transform, transmit, and convert electricity. Transmission needs are growing—to support the expansion of data centers and link diverse energy resources into the grid. This expansion will require greater quantities of minerals. Although some minerals are produced in the United States, the United States relies on imports for others. This infographic shows the key minerals that support energy transmission, and how reliant the United States is on imports for these minerals.

General Information Product↗
USGS2025

Lunar grid systems, coordinate systems, and map projections for the Artemis missions and lunar surface navigation

Foreward This document contains design specifications of a navigational standard for the Moon, including a Lunar Transverse Mercator system, a Lunar Polar Stereographic system, a Lunar Grid Reference System, and a unique coordinate structure, Artemis Condensed Coordinates, for Artemis mission navigation and lunar surface science. The National Aeronautics and Space Administration (NASA) Artemis campaign seeks to place humans on the Moon for the first time since the Apollo missions. Early Artemis missions are heavily focused on the lunar south pole, which promises to return valuable data on the Moon’s geologic record, amongst other mission objectives. Coordinate systems in use today for the lunar south pole provides crew members on the surface neither an efficient nor intuitive means to communicate their position and orientation. A novel grid coordinate system, the Lunar Grid Reference System, is proposed to address these concerns for use in real-time extravehicular activity operations on the lunar surface. The many stakeholders involved in the Artemis missions will need a common system to communicate position and orientation while astronauts are operating on the lunar surface. To that end, Artemis crew members will need that system to be efficient and intuitive to promote efficient extravehicular activity timelines and reduce confusion. In the context of this document, these characteristics are addressed on the design of lunar coordinate systems: Efficient.—The number of characters required to communicate a location within a desired precision level in both local and global contexts, and how many steps are required for a recipient or sender to interpret a location. Intuitive.—How well the system aligns with human perceptual abilities, and whether the system yields distances that have the same relationship to actual lunar surface distance in all directions from the point where a person is located. Technological systems are currently being investigated to supplement the crew members’ ability to locate and orient themselves and other assets on the lunar surface; however, it is unlikely that those systems will be fully operational for the first few landed missions. Even with future positional aids, crew members will still need an efficient and intuitive means to communicate position and orientation. In addition, if technological systems fail, the crews will require land navigation skills and have maps available, thus providing further motivation for a crew-centric coordinate system. The contents of this U.S. Geological Survey (USGS) document detail a comprehensive framework for standardizing lunar crewed surface navigation within NASA and outlines the protocols, methods, and designs necessary for achieving consistency and interoperability across relevant space mission teams and lunar surface navigators. Key components of this document include designs of map projections, projected coordinate reference systems (Lunar Transverse Mercator and Lunar Polar Stereographic systems), and a grid system (Lunar Grid Reference System and Artemis Condensed Coordinates) for the Moon. The work proposed in this document seeks to accomplish something similar to the National Geospatial-Intelligence Agency (NGA) document SIG 0012 (NGA, 2014a), but for using grid systems for the Moon. This report incorporates initial feedback and input from NASA’s Artemis Geospatial Data Team, NASA’s Flight Operations Directorate, National Geodetic Survey, USGS Astrogeology Science Center, and NGA and is intended to serve as a resource for all involved with the Artemis missions, as well as for engineers designing and operating lunar infrastructure.

Techniques and Methods↗
USGS2025

Gulf Coast Basin CORE-CM initiative final report

The Bureau of Economic Geology at the University of Texas at Austin (UT-BEG) is leading the Gulf Coast Carbon Ore, Rare Earth, and Critical Minerals (CORE-CM) Initiative to assess the potential to produce critical minerals (CMs), including rare earth elements (REEs) from coal, coal ash, and produced water related to oil and gas production, and related materials (alumina processing waste [red mud], heavy mineral sands, graphite, and zeolite) within the Gulf Coast Basin. This project represents the first phase in a long-term program and provides reconnaissance data that will be foundational for future work by assessing resources and suggesting plans to be conducted in future work and expanding stakeholder engagement. The project includes several tasks designed to identify, characterize, and assess several necessary aspects for development of CMs and REEs in the Gulf Coast Basin.

Gulf Coast basin↗