SEARCH · Geology Reports

Results for “Washington Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88Linked to original sources

USGS2003

Eruptive history and geochronology of the Mount Baker volcanic field, Washington

Mount Baker, a steaming, ice-mantled, andesitic stratovolcano, is the most conspicuous component of a multivent Quaternary volcanic field active almost continuously since 1.3 Ma. More than 70 packages of lava flows and ~110 dikes have been mapped, ???500 samples chemically analyzed, and ~80 K-Ar and 40Ar/39Ar ages determined. Principal components are (1) the ignimbrite-filled Kulshan caldera (1.15 Ma) and its precaldera and postcaldera rhyodacite lavas and dikes (1.29-0.99 Ma); (2)~60 intracaldera, hydrothermally altered, andesite-dacite dikes and pods-remnants of a substantial early-postcaldera volcanic center (1.1-0.6 Ma); (3) unaltered intracaldera andesite lavas and dikes, including those capping Ptarmigan and Lasiocarpa Ridges and Table Mountain (0.5-0.2 Ma); (4) the long-lived Chowder Ridge focus (1.29-0.1 Ma)-an andesite to rhyodacite eruptive complex now glacially reduced to ~50 dikes and remnants of ~10 lava flows; (5) Black Buttes stratocone, basaltic to dacitic, and several contemporaneous peripheral volcanoes (0.5-0.2 Ma); and (6) Mount Baker stratocone and contemporaneous peripheral volcanoes (0.1 Ma to Holocene). Glacial ice has influenced eruptions and amplified erosion throughout the lifetime of the volcanic field. Although more than half the material erupted has been eroded, liberal and conservative volume estimates for 77 increments of known age yield cumulative curves of volume erupted vs. time that indicate eruption rates in the range 0.17-0.43 km3/k.y. for major episodes and longterm background rates of 0.02-0.07 km3/k.y. Andesite and rhyodacite each make up nearly half of the 161 ?? 56 km3 of products erupted, whereas basalt and dacite represent only a few cubic kilometers, each representing 1%-3% the total. During the past 4 m.y., the principal magmatic focus has migrated stepwise 25 km southwestward, from the edge of the Chilliwack batholith to present-day Mount Baker.

Geological Society of America Bulletin↗

USGS2007

Landslide susceptibility revealed by LIDAR imagery and historical records, Seattle, Washington

Light detection and ranging (LIDAR) data were used to visually map landslides, headscarps, and denuded slopes in Seattle, Washington. Four times more landslides were mapped than by previous efforts that used aerial photographs. The mapped landforms (landslides, headscarps, and denuded slopes) were created by many individual landslides. The spatial distribution of mapped landforms and 1308 historical landslides show that historical landslide activity has been concentrated on the mapped landforms, and that most of the landslide activity that created the landforms was prehistoric. Thus, the spatial densities of historical landslides on the landforms provide approximations of the landforms' relative susceptibilities to future landsliding. Historical landslide characteristics appear to be closely related to landform type so relative susceptibilities were determined for landslides with various characteristics. No strong relations were identified between stratigraphy and landslide occurrence; however, landslide characteristics and slope morphology appear to be related to stratigraphic conditions. Human activity is responsible for causing about 80% of historical Seattle landslides. The distribution of mapped landforms and human-caused landslides suggests the probable characteristics of future human-caused landslides on each of the landforms. The distribution of mapped landforms and historical landslides suggests that erosion of slope-toes by surface water has been a necessary condition for causing Seattle landslides. Human activity has largely arrested this erosion, which implies that landslide activity will decrease with time as hillsides naturally stabilize. However, evaluation of glacial-age analogs of areas of recent slope-toe erosion suggests that landslide activity in Seattle will continue for the foreseeable future. ?? 2006 Elsevier B.V. All rights reserved.

Engineering Geology↗

USGS2008

Modeling rainfall conditions for shallow landsliding in Seattle, Washington

We describe the results from an application of a distributed, transient infiltration–slope-stability model for an 18 km 2 area of southwestern Seattle, Washington, USA. The model (TRIGRS) combines an infinite slope-stability calculation and an analytic, one-dimensional solution for pore-pressure diffusion in a soil layer of finite depth in response to time-varying rainfall. The transient solution for pore-pressure response can be superposed on any steady-state groundwater-flow field that is consistent with model assumptions. Applied over digital topography, the model computes a factor of safety for each grid cell at any time during a rainstorm. Input variables may vary from cell to cell, and the rainfall rate can vary in both space and time. For Seattle, topographic slope derived from an airborne laser swath mapping (ALSM)–based 3 m digital elevation model (DEM), maps of soil and water-table depths derived from geotechnical borings, and hourly rainfall intensities were used as model inputs. Material strength and hydraulic properties used in the model were determined from field and laboratory measurements, and a tension-saturated initial condition was assumed. Results are given in terms of a destabilizing intensity and duration of rainfall, and they were evaluated by comparing the locations of 212 historical landslides with the area mapped as potentially unstable. Because the equations of groundwater flow are explicitly solved with respect to time, the results from TRIGRS simulations can be portrayed quantitatively to assess the potential landslide hazard based on rainfall conditions.

Washington↗

USGS2008

Eruptive history and tectonic setting of Medicine Lake Volcano, a large rear-arc volcano in the southern Cascades

Medicine Lake Volcano (MLV), located in the southern Cascades ∼ 55 km east-northeast of contemporaneous Mount Shasta, has been found by exploratory geothermal drilling to have a surprisingly silicic core mantled by mafic lavas. This unexpected result is very different from the long-held view derived from previous mapping of exposed geology that MLV is a dominantly basaltic shield volcano. Detailed mapping shows that < 6% of the ∼ 2000 km 2 of mapped MLV lavas on this southern Cascade Range shield-shaped edifice are rhyolitic and dacitic, but drill holes on the edifice penetrated more than 30% silicic lava. Argon dating yields ages in the range ∼ 475 to 300 ka for early rhyolites. Dates on the stratigraphically lowest mafic lavas at MLV fall into this time frame as well, indicating that volcanism at MLV began about half a million years ago. Mafic compositions apparently did not dominate until ∼ 300 ka. Rhyolite eruptions were scarce post-300 ka until late Holocene time. However, a dacite episode at ∼ 200 to ∼ 180 ka included the volcano's only ash-flow tuff, which was erupted from within the summit caldera. At ∼ 100 ka, compositionally distinctive high-Na andesite and minor dacite built most of the present caldera rim. Eruption of these lavas was followed soon after by several large basalt flows, such that the combined area covered by eruptions between 100 ka and postglacial time amounts to nearly two-thirds of the volcano's area. Postglacial eruptive activity was strongly episodic and also covered a disproportionate amount of area. The volcano has erupted 9 times in the past 5200 years, one of the highest rates of late Holocene eruptive activity in the Cascades. Estimated volume of MLV is ∼ 600 km 3 , giving an overall effusion rate of ∼ 1.2 km 3 per thousand years, although the rate for the past 100 kyr may be only half that. During much of the volcano's history, both dry HAOT (high-alumina olivine tholeiite) and hydrous calcalkaline basalts erupted together in close temporal and spatial proximity. Petrologic studies indicate that the HAOT magmas were derived by dry melting of spinel peridotite mantle near the crust mantle boundary. Subduction-derived H 2 O-rich fluids played an important role in the generation of calcalkaline magmas. Petrology, geochemistry and proximity indicate that MLV is part of the Cascades magmatic arc and not a Basin and Range volcano, although Basin and Range extension impinges on the volcano and strongly influences its eruptive style. MLV may be analogous to Mount Adams in southern Washington, but not, as sometimes proposed, to the older distributed back-arc Simcoe Mountains volcanic field.

Journal of Volcanology and Geothermal Research↗

USGS2016

Accommodation space in a high-wave-energy inner-shelf during the Holocene marine transgression: Correlation of onshore and offshore inner-shelf deposits (0–12 ka) in the Columbia River littoral cell system, Washington and Oregon, USA

The Columbia River Littoral Cell (CRLC), a high-wave-energy littoral system, extends 160 km alongshore, generally north of the large Columbia River, and 10–15 km in across-shelf distance from paleo-beach backshores to about 50 m present water depths. Onshore drill holes (19 in number and 5–35 m in subsurface depth) and offshore vibracores (33 in number and 1–5 m in subsurface depth) constrain inner-shelf sand grain sizes (sample means 0.13–0.25 mm) and heavy mineral source indicators (> 90% Holocene Columbia River sand) of the inner-shelf facies (≥ 90% fine sand). Stratigraphic correlation of the transgressive ravinement surface in onshore drill holes and in offshore seismic reflection profiles provide age constraints (0–12 ka) on post-ravinement inner-shelf deposits, using paleo-sea level curves and radiocarbon dates. Post-ravinement deposit thickness (1–50 m) and long-term sedimentation rates (0.4–4.4 m ka − 1 ) are positively correlated to the cross-shelf gradients (0.36–0.63%) of the transgressive ravinement surface. The total post-ravinement fill volume of fine littoral sand (2.48 × 10 10 m 3 ) in the inner-shelf represents about 2.07 × 10 6 m 3 year − 1 fine sand accumulation rate during the last 12 ka, or about one third of the estimated middle- to late-Holocene Columbia River bedload or sand discharge (5–6 × 10 6 m 3 year − 1 ) to the littoral zone. The fine sand accumulation in the inner-shelf represents post-ravinement accommodation space resulting from 1) geometry and depth of the transgressive ravinement surface, 2) post-ravinement sea-level rise, and 3) fine sand dispersal in the inner-shelf by combined high-wave-energy and geostrophic flow/down-welling drift currents during major winter storms.

Oregon, Washington↗

USGS1982

Chemical and mineralogical analysis of devonian black-shale samples from Martin County, Kentucky; Carroll and Washington counties, Ohio; Wise County, Virginia; and Overton County, Tennessee, U.S.A.

Core samples of Devonian shales from five localities in the Appalachian basin have been analyzed chemically and mineralogically. The amounts of major elements are similar; however, the minor constituents, organic C, S, phosphate and carbonate show ten-fold variations in amounts. Trace elements Mo, Ni, Cu, V, Co, U, Zn, Hg, As and Mn show variations in amounts that can be related to the minor constituents. All samples contain major amounts of quartz, illite, two types of mixed-layer clays, and chlorite in differing quantities. Pyrite, calcite, feldspar and kaolinite are also present in many samples in minor amounts. Dolomite, apatite, gypsum, barite, biotite and marcasite are present in a few samples in trace amounts. Trace elements listed above are strongly controlled by organic C with the exception of Mn which is associated with carbonate minerals. Amounts of organic C generally range from 3 to 6%, and S is in the range of 2-5%. Amounts of trace elements show the following general ranges in ppm (parts per million): Co, 20-40; Cu, 40-70; U, 10-40; As, 20-40; V, 150-300; Ni, 80-150; high values are as much as twice these values. The organic C was probably the concentrating agent, and the organic C and sulfide S together created an environment that immobilized and preserved these trace elements. Closely spaced samples showing an abrupt transition in color also show changes in organic C, S and trace-element contents. Several associations exist between mineral and chemical content. Pyrite and marcasite are the only minerals found to contain sulfide-S. In general, the illite-chlorite mixed-layer clay mineral shows covariation with organic C if calcite is not present. The enriched trace elements are not related to the clay types, although the clay and organic matter are intimately associated as the bulk fabric of the rock. ?? 1982.

Chemical Geology↗

USGS2003

Number and size of last-glacial Missoula floods in the Columbia River valley between the Pasco Basin, Washington, and Portland, Oregon

Field evidence and radiocarbon age dating, combined with hydraulic flow modeling, provide new information on the magnitude, frequency, and chronology of late Pleistocene Missoula floods in the Columbia River valley between the Pasco Basin, Washington, and Portland, Oregon. More than 25 floods had discharges of > 1.0 x 10 6 m 3 /s. At least 15 floods had discharges of >3.0 x 10 6 m 3 /s. At least six or seven had peak discharges of >6.5 x 106 m 3 /s, and at least one flood had a peak discharge of >10 x 106 m 3 /s, a value consistent with earlier results from near Wallula Gap, but better defined because of the strong hydraulic controls imposed by critical flow at constrictions near Crown and Mitchell Points in the Columbia River Gorge. Stratigraphy and geomorphic position, combined with 25 radiocarbon ages and the widespread occurrence of the ca. 13 ka (radiocarbon years) Mount St. Helens set-S tephra, show that most if not all the Missoula flood deposits exposed in the study area were emplaced after 19 ka (radiocarbon years), and many were emplaced after 15 ka. More than 13 floods perhaps postdate ca. 13 ka, including at least two with discharges of >6 x 10 6 m 3 /s. From discharge and stratigraphic relationships upstream, we hypothesize that the largest flood in the study reach resulted from a Missoula flood that predated blockage of the Columbia River valley by the Cordilleran ice sheet. Multiple later floods, probably including the majority of floods recorded by fine- and coarse-grained deposits in the study area, resulted from multiple releases of glacial Lake Missoula that spilled into a blocked and inundated Columbia River valley upstream of the Okanogan lobe and were shunted south across the Channeled Scabland.

Geological Society of America Bulletin↗

USGS2020

Sediment export and impacts associated with river delta channelization compound estuary vulnerability to sea-level rise, Skagit River Delta, Washington, USA

Improved understanding of the budget and retention of sediment in river deltas is becoming increasingly important to mitigate and plan for impacts expected with sea level rise. In this study, analyses of historical bathymetric change, sediment core stratigraphy, and modeling are used to evaluate the sediment budget and environmental response of the largest river delta in the U.S. Pacific Northwest to western land-use change beginning in ~1850. An estimated 142±28 M m 3 of sediment accumulated offshore of the emergent Skagit River delta in Washington State between 1890 and 2014 and ~68% of which was found in sand deposits. The fraction of sediment retained in sand reservoirs represents 83% of the expected fluvial sand delivery over this time suggesting their potential utility to evaluate the relative contribution of different land uses to sediment runoff through time. A significantly higher ratio of sand retention to delivery during the period 1890–1939 coincided with extensive watershed denudation (clear-cut logging) and channel dredging, relative to the period 1940–2014, which was characterized by improved forest practices and sediment management to protect endangered species but also more extensive river channelization. Retention in the delta foreset of 78% of the sand delivered by the river between 1890 and 1939 was associated with extensive sediment bypassing and delta progradation that is shown to be 5–10x higher than rates over the Holocene. Comparable offshore sand retention over time and higher nearshore retention subsequent to 1940 after normalizing for the assumed reduction in sediment runoff with improved forest practices, suggests that channelization has continued to influence sediment export at a magnitude equivalent to the effects of early logging. Adverse impacts of the bypassing sediment regime to natural hazards risk and ecosystem management concerns are discussed, including the role of the lost sediment as a resource to mitigate subsiding coastal lands vulnerable to flood impacts. The sediment budget and coastal change analyses provide a framework for evaluating opportunities to achieve greater resilience across several sectors of coastal land use important in low-lying deltas worldwide.

Washington↗

USGS1987

The geochemistry of water near a surficial organic-rich uranium deposit, northeastern Washington State, U.S.A.

The chemistry of three stream, three spring and six near-surface waters in the vicinity of a Holocene organic-rich uranium deposit is described, with particular emphasis on the chemistry of U. Results characterize the solution behavior of uranium as U-bearing water interacts with relatively undecomposed, surficial organic matter. Of the measured major and trace chemical species, only U is consistently highly enriched (17-318 ppb) relative to reported values for regional waters, or to literature values for waters in largely granitic terrains. R-mode factor analysis of the chemical data suggests that most U is present in a soluble form, but that some U is also associated with fine suspended particulates of clay, organic matter, or hydrous oxides. Calculations that apply thermodynamic data to predict U speciation in solution indicate the relative importance of uranyl carbonate and uranyl phosphate complexes. Analysis of more finely filtered samples (0.05 ??m vs. 0.45 ??m), and direct radiographic observations using fission-track detectors suspended in the waters indicate the presence of some uraniferous particulate matter. Application of existing thermodynamic data for uranous- and uranyl-bearing minerals indicates that all waters are undersaturated with U minerals as long as ambient Eh ??? +0.1 v. If coexisting surface and near-surface waters are sufficiently oxidizing, initial fixation of U in the deposit should be by a mechanism of adsorption. Alternatively, more reducing conditions may prevail in deeper pore waters of the organic-rich host sediments, perhaps leading to direct precipitation or diagenetic formation of U4+ minerals. A 234U 238U alpha activity ratio of 1.08 ?? 0.02 in a spring issuing from a hillslope above the deposit suggests a relatively soluble source of U. In contrast, higher activity ratios of 234U 238U (??? 1.3) in waters in contact with the uraniferous valley-fill sediments suggest differences in the nature of interaction between groundwater and the local, U-rich source rocks. ?? 1987.

Chemical Geology↗

USGS2008

Instrumentation recommendations for volcano monitoring at U.S. volcanoes under the national volcano early warning system

As magma moves toward the surface, it interacts with anything in its path: hydrothermal systems, cooling magma bodies from previous eruptions, and (or) the surrounding “country rock.” Magma also undergoes significant changes in its physical properties as pressure and temperature conditions change along its path. These interactions and changes lead to a range of geophysical and geochemical phenomena. The goal of volcano monitoring is to detect and correctly interpret such phenomena in order to provide early and accurate warnings of impending eruptions. Given the well-documented hazards posed by volcanoes to both ground-based populations (for example, Blong, 1984; Scott, 1989) and aviation (for example, Neal and others, 1997; Miller and Casadevall, 2000), volcano monitoring is critical for public safety and hazard mitigation. Only with adequate monitoring systems in place can volcano observatories provide accurate and timely forecasts and alerts of possible eruptive activity. At most U.S. volcanoes, observatories traditionally have employed a two-component approach to volcano monitoring: (1) install instrumentation sufficient to detect unrest at volcanic systems likely to erupt in the not-too-distant future; and (2) once unrest is detected, install any instrumentation needed for eruption prediction and monitoring. This reactive approach is problematic, however, for two reasons. 1. At many volcanoes, rapid installation of new ground-1. based instruments is difficult or impossible. Factors that complicate rapid response include (a) eruptions that are preceded by short (hours to days) precursory sequences of geophysical and (or) geochemical activity, as occurred at Mount Redoubt (Alaska) in 1989 (24 hours), Anatahan (Mariana Islands) in 2003 (6 hours), and Mount St. Helens (Washington) in 1980 and 2004 (7 and 8 days, respectively); (b) inclement weather conditions, which may prohibit installation of new equipment for days, weeks, or even months, particularly at midlatitude or high-latitude volcanoes; (c) safety factors during unrest, which can limit where new instrumentation can safely be installed (particularly at near-vent sites that can be critical for precursor detection and eruption forecasting); and (d) the remoteness of many U.S. volcanoes (particularly those in the Aleutians and the Marianas Islands), where access is difficult or impossible most of the year. Given these difficulties, it is reasonable to anticipate that ground-based monitoring of eruptions at U.S. volcanoes will likely be performed primarily with instruments installed before unrest begins. 2. Given a growing awareness of previously undetected 2. phenomena that may occur before an eruption begins, at present the types and (or) density of instruments in use at most U.S. volcanoes is insufficient to provide reliable early warning of volcanic eruptions. As shown by the gap analysis of Ewert and others (2005), a number of U.S. volcanoes lack even rudimentary monitoring. At those volcanic systems with monitoring instrumentation in place, only a few types of phenomena can be tracked in near-real time, principally changes in seismicity, deformation, and large-scale changes in thermal flux (through satellite-based remote sensing). Furthermore, researchers employing technologically advanced instrumentation at volcanoes around the world starting in the 1990s have shown that subtle and previously undetectable phenomena can precede or accompany eruptions. Detection of such phenomena would greatly improve the ability of U.S. volcano observatories to provide accurate early warnings of impending eruptions, and is a critical capability particularly at the very high-threat volcanoes identified by Ewert and others (2005). For these two reasons, change from a reactive to a proactive volcano-monitoring strategy is clearly needed at U.S. volcanoes. Monitoring capabilities need to be expanded at virtually every volcanic center, regardless of its current state of unrest, with particular emphases on real-time data transmission and increasing the diversity, quality, and quantity of instrumentation at U.S. volcano observatories. In this report, we present recommendations for the types and numbers of instruments that should be deployed to monitor U.S. volcanoes. These recommendations are the result of discussions among members of a panel of government- and university-based scientists about the status and future directions of volcano monitoring, with discussions framed by the U.S. Geological Survey (USGS)’s National Volcano Early Warning System (NVEWS) initiative (Ewert and others, 2005).

Scientific Investigations Report↗

USGS1983

Heavy-mineral distribution in modern and ancient bay deposits, Willapa Bay, Washington, U.S.A.

Analysis of heavy-mineral distribution in modern sediments of Willapa Bay, Washington, indicates a dominance of two mineralogic assemblages, one with approximately equivalent amounts of hornblende, orthopyroxene and clinopyroxene, the other dominated by clinopyroxene. The hornblende-orthopyroxene-clinopyroxene suite is derived from the Columbia River, which discharges into the ocean a short distance south of the bay. The clinopyroxene suite is restricted in modern sediments to sands in rivers flowing into the bay from the east. The heavy-mineral distributions suggest that sand discharged from the Columbia River, borne north by longshore transport, and carried into the bay by tidal currents accounts for most of the sand within the interior of Willapa Bay. Three heavy-mineral assemblages are present in the surrounding Pleistocene deposits; two of these are identical to the modern assemblages described above. These heavy-mineral assemblages reflect the relative influence of tidal and fluvial processes on the Late Pleistocene deposits; their relative influences are consistent with those inferred on the basis of sedimentary structures and stratigraphic relations in about two-thirds of the samples examined. The anomalies can be explained by recycling of sand from older deposits. The persistence of the two heavy-mineral assemblages suggests that the pattern of estuarine sedimentation in Late Pleistocene deposits closely resembled that of the modern bay. The third heavy-mineral suite, dominated by epidote, occurs in a few older Pleistocene units. On the north side of the bay, the association of this suite with southwest-directed foresets in crossbedded gravel indicates derivation from the northeast, perhaps from an area of glacial outwash. The presence of this suite in ancient estuarine sands exposed on the east side of the bay suggests that input from this northerly source may have intermittently dominated bay deposition in the past.

Washington↗

USGS1984

Tidal-cycle changes in oscillation ripples on the inner part of an estuarine sand flat

Oscillation ripples form on subaqueous sand beds when wave-generated, near-bottom water motions are strong enough to move sand grains. The threshold of grain motion is the lower bound of the regime of oscillation ripples and the onset of sheet flow is the upper bound. Based on the relation between ripple spacing and orbital diameter, three types of symmetrical ripples occur within the ripple regime. In the lower part of the ripple regime (orbital ripples), spacing is proportional to orbital diameter; in the upper part (anorbital ripples) spacing is independent of orbital diameter. Between these regions occurs a transitional region (suborbital ripples). Oscillation ripples develop on a sandy tidal flat in Willapa Bay, Washington, as a result of waves traversing the area when it is submerged. Because wave energy is usually low within the bay, the ripples are primarily orbital in type. This means that their spacing should respond in a systematic way to changes in wave conditions. During the high-water parts of some tidal cycles, ripples near the beach decrease in spacing during the latter stage of the ebb tide while ripples farther offshore do not change. Observations made over several tidal cycles show that the zone of active ripples shifts on- or offshore in response to different wave conditions. Detailed bed profiles and current measurements taken during the high-water part of spring tides show the manner in which the oscillation ripples change with changes in orbital diameter. Changes in ripple spacing at the study site could be correlated with changes in orbital diameter in the manner suggested by the criterion for orbital ripples. However, there appeared to be a lag time between a decrease in orbital diameter and the corresponding decrease in ripple spacing. Absence of change during a tidal cycle could be attributed to orbital velocities below the threshold for grain motion that negated the effects of changes in orbital diameter. Because changes in sand-flat ripples depend both upon changes in orbital diameter and upon the magnitude of the orbital velocity, exposed ripples were not necessarily produced during the preceding high tide. In fact, some ripples may have been just produced, while others, farther offshore, may have been produced an unknown number of tides earlier. Therefore, when interpreting past wave conditions over tidal flats from low-tide ripples, one must remember that wave periods have to be short enough to produce velocities greater than the threshold velocity for the orbital diameters calculated from the observed ripple spacings.

Washington↗

USGS1977

Application of a hydrometeorological model to the south-central Sierra Nevada of California

A hydrometeorological streamflow-prediction model (HM model) developed for the North Cascades of Washington has been tested in the south-central Sierra Nevada of California. Twenty-four drainages ranging in mean altitude from 770 to 3,160 metres, including several of the major ones such as those of the Kern, Kings, and Merced Rivers, were examined. Eight U.S. National Oceanic and Atmospheric Administration precipitation stations were evaluated. Of these, three proved to be of significant value for nearly all the drainages used. Results are given for predictions on February 1, March 1, and April 1 of monthly runoff of five major drainages for the April-September season. Also demonstrated is the April 1 prediction of a daily hydrograph for the April-September season for 2 diverse years. The altitude distribution of storage and runoff, both observed and predicted, is determined by using several drainages with different area-altitude profiles. Results of this calculation for two drainages show that, on the average, approximately 50 percent of the April-July runoff originates above 2,800 m. The influence of subsequent precipitation on prediction accuracy is determined by relating prediction error and actual precipitation occurring after the prediction day. Results for three basins show that about 75 percent of the error of a January-September prediction on January 1 is due to precipitation occurring during the prediction season. Comparisons of prediction accuracy are made for five major drainages: the Kern River near Kernville; the Kings River below North Fork, near Trimmer (inflow to Pine Flat Dam); the Kings River at Piedra; the Merced River at Pohono Bridge, near Yosemite; and the Merced River below Merced Falls Dam, near Snelling. The accuracy of the HM model appears to be about 24 percent higher than existing operational methods in predicting the April-July runoff on April 1.

California↗

USGS1998

Structure, age, and tectonic setting of a multiply reactivated shear zone in the piedmont in Washington, D.C., and vicinity

The Rock Creek shear zone is the dominant tectonic feature in the Piedmont in Washington, D.C. and adjacent parts of Maryland, has an exposed length of 25 km, and a width of up to 3 km. The shear zone is characterized by a complicated composite fabric produced by the imposition of both ductile and brittle structures as well as the reactivation, transposition, and folding of older structures during subsequent antithetic displacement. At least five main types of structural elements are discernible and include: 1) relict, medium- to coarse-grained mylonitic foliation and related structures produced by sinistral shearing under at least middle amphibolite facies conditions; 2) a ductile fault zone having an apparent sinistral displacement of at least several km and an unknown, but possibly significant component of upward throw of the east wall; 3) pervasive, fine-grained ultramylonitic foliation associated with quartz ribbons and late oblique shear bands, generated by dextral shearing under thermal conditions that appear to have progressed from middle greenschist to sub-greenschist (semi-brittle); 4) a system of oblique-(west wall up) and dextralship faults localized chiefly within a tectonic me??lange at the junction of two major strands, and whose motion spanned the ductile-brittle transition; and 5) a system of post-Cretaceous thrust faults that cut Coastal Plain rocks as young as Quaternary as well as the previously deformed crystalline rocks. The first two sets of structures are of probable Ordovician age and are thus believed to coincide with the Taconic event, which produced regional middle to upper amphibolite facies metamorphism, widespread plutonism, and extensive southwest-vergent fold phases in this area. In contrast, the dextral shearing and faulting were generated during final thermal cooling and represent the latest Paleozoic penetrative deformation that affected this area. They are very likely Alleghanian because of their great similarity to other better-dated Alleghanian structural features in the Maryland and Virginia Piedmont.

Southeastern Geology↗

USGS2009

History of the topographic branch (division)

From a very early period of the world's existence, man has endeavored to represent the earth's surface in a graphic form for the information of his fellow men, realizing that no oral or written description is capable of setting forth topographic facts so vividly and so clearly as a map. Mapping of the areas of the United States began with the charting of portions of its coast line by early explorers; the need for topographic maps was first recognized during the war of the Colonies for independence from Great Britain. On July 22, 1777, Congress authorized General Washington to appoint: 'Mr. Robert Erskine, or any other person that he may think proper, geographer and surveyor of the roads, to take sketches of the country and the seat of war.' By several acts during the Revolutionary War, Congress provided 'geographers' for the armies of the United States, some of them with the pay of a colonel, amounting to $60 a month and allowances. At the end of the War, a resolution of May 27, 1785, continued in service the 'geographer of the United States' for a period of 3 years. The War Department recognized the necessity of 'geographical engineers' and requested Congress to authorize their appointment, but it was not until the next war that Congress authorized on March 3, 1813, the appointment of eight topographic engineers and eight assistant topographic engineers under the direction of the General Staff of the Army. These officers formed the nucleus of the first Corps of Topographic Engineers in the Army, and that Corps continued to function as an independent unit until it was absorbed by the Corps of Engineers in 1863, during the Civil War between the States. Between the Louisiana Purchase in 1803, and the outbreak of the Civil War, more than a hundred exploring and mapping expeditions were sent into the vast territory lying west of the Mississippi River to investigate the natural resources of this newly acquired country and to find possible locations for wagon roads to the Pacific Coast. These expeditions were sent out by the War Department and were in charge of Army officers. It is interesting to note that such generals as George G. Meade, J.C. Fremont, Joseph E. Johnston, W.F. Smith, John Pope, A.W. Whipple, J.G. Parke, G.K. Warren, and H.L. Abbott, all officers of the Corps of Topographic Engineers, had charge of expeditions and were among our earliest map makers. Unfortunately, the data obtained by these editions were not of sufficient accuracy to serve as a basis for topographic maps of value other than in illustrating their voluminous reports. During this early period, numerous surveys were undertaken within the original Thirteen States, by the Federal government and by the States. The most important were those carried on by the U.S. Coast and Geodetic Survey, which made an accurate survey of the Atlantic Coastline and established a triangulation system that was of so high a standard as to constitute the first and only accurate data for topographic mapping obtained before the Civil War. The Coast and Geodetic Survey, while charting the coast and rivers, also mapped a strip of country extending a few miles inland, the relief being shown by means of hachures, together with contour lines, until 1846 when the first government topographic map on which the relief was shown by contours alone was made, covering an area in the vicinity of Boston Harbor. In 1835, however, the Geological and Topographical Survey of Maryland had issued a map on which the relief was shown by contours, and this is believed to be the first contoured map issued in this country. The outbreak of the Civil War stopped all mapping activities other than those needed by the U.S. Army. During the war, topographic surveys were carried on throughout the war zone under the supervision of the Corps of Engineers, the topographers being civilian employees. After the war, the country west of the Mississippi again became the center of the mapping activities

Circular↗

USGS1996

The southern Whidbey Island fault: An active structure in the Puget Lowland, Washington

Information from seismic-reflection profiles, outcrops, boreholes, and potential field surveys is used to interpret the structure and history of the southern Whidbey Island fault in the Puget Lowland of western Washington. This northwest-trending fault comprises a broad (as wide as 6–11 km), steep, northeast-dipping zone that includes several splays with inferred strike-slip, reverse, and thrust displacement. Transpressional deformation along the southern Whidbey Island fault is indicated by along-strike variations in structural style and geometry, positive flower structure, local unconformities, out-of-plane displacements, and juxtaposition of correlative sedimentary units with different histories. The southern Whidbey Island fault represents a segment of a boundary between two major crustal blocks. The Cascade block to the northeast is floored by diverse assemblages of pre-Tertiary rocks; the Coast Range block to the southwest is floored by lower Eocene marine basaltic rocks of the Crescent Formation. The fault probably originated during the early Eocene as a dextral strike-slip fault along the eastern side of a continental-margin rift. Bending of the fault and transpressional deformation began during the late middle Eocene and continues to the present. Oblique convergence and clockwise rotation along the continental margin are the inferred driving forces for ongoing deformation. Evidence for Quaternary movement on the southern Whidbey Island fault includes (1) offset and disrupted upper Quaternary strata imaged on seismic-reflection profiles; (2) borehole data that suggests as much as 420 m of structural relief on the Tertiary-Quaternary boundary in the fault zone; (3) several meters of displacement along exposed faults in upper Quaternary sediments; (4) late Quaternary folds with limb dips of as much as ≈9°; (5) large-scale liquefaction features in upper Quaternary sediments within the fault zone; and (6) minor historical seismicity. The southern Whidbey Island fault should be considered capable of generating large earthquakes (M s ≥7) and represents a potential seismic hazard to residents of the Puget Lowland.

Washington↗

USGS2018

Modeled inundation limits of potential lahars from Mount Adams in the White Salmon River Valley, Washington

Lahars large enough to reach populated areas are a hazard at Mount Adams, a massive volcano in the southern Cascade Range of Washington State (fig. 1). It is considered to be still active and has the potential to erupt again. By definition, lahars are gravity-driven flows of water-saturated mixtures of mud and rock (plus or minus ice, wood, and other debris), which originate from volcanoes and have a variety of potential triggering mechanisms (Vallance, 2000; Vallance and Iverson, 2015). Flowing mixtures can range in fluid consistency from something like a milkshake to something more like wet concrete, and they behave like flash floods, in that they can appear suddenly in river channels with little warning and commonly have boulder- or log-choked flow fronts. Lahars are hazardous because they can flow rapidly in confined valleys (commonly 20–35 miles per hour [mph] or 9–16 meters per second [m/s]), can travel more than 100 miles (mi) (161 kilometers [km]) from a source volcano, and can move with incredible destructive force, carrying multi-ton boulders and logs that can act as battering rams (Pierson, 1998). The biggest threats from lahars to downstream communities are present during eruptive activity, and impacts to communities can be dire. For example, a very large eruption-triggered lahar in Colombia in 1985 surprised and killed more than 20,000 people in a large town located about 45 mi (72 km) downstream and out of sight of the volcano that produced it (Pierson and others, 1990). Mount Adams, one of the largest volcanoes in the Cascade Range, is a composite stratocone composed primarily of andesite lava flows. It has been the most continuously active volcano within the 480-mi 2 Mount Adams volcanic field—a region covering parts of Klickitat, Skamania, Yakima, andLewis Counties and part of the Yakama Nation Reservation in Washington State (Hildreth and Fierstein,1995, 1997). About 500,000 years in age, Mount Adams reached its present size by about 15,000 years ago, primarily through the episodic effusion of lava flows; it has not had a history of major explosive eruptions like Mount St. Helens, its neighbor to the west. Timing of the most recent eruptive activity (recorded by four thin tephra layers) is on the order of 1,000 years ago; the tephras are bracketed by 2,500-year-old and 500-year-old ash layers from Mount St. Helens (Hildreth and Fierstein, 1995, 1997). Mount Adams currently shows no signs of renewed unrest. Eruptive history does not tell us everything we need to know about hazards at Mount Adams, however, which are fully addressed in the volcano hazard assessment for Mount Adams (W.E. Scott and others, 1995). This volcano has had a long-active hydrothermal system that circulated acidic hydrothermal fluids, formed by the solution of volcanic gases in heated groundwater, through fractures and permeable zones into upper parts of the volcanic cone. Acid sulfate leaching of rocks in the summit area may still be occurring, but chemical and thermal evidence suggests that the main hydrothermal system is no longer active at Mount Adams (Nathenson and Mariner, 2013). However, these rock-weakening chemical reactions have operated long enough to change about 0.4 cubic miles (mi 3 ) (1.7 cubic kilometers [km 3 ]) of the hard lava rock in the volcano’s upper cone to a much weaker clay-rich rock, thus significantly reducing rock strength and thereby slope stability in parts of the cone (Finn and others, 2007). The two largest previous lahars from Mount Adams were triggered by landslides of hydrothermally altered rock from the upper southwestern flank of the cone, and any future large lahars are likely to be triggered by the same mechanism. Mount Rainier also has had extensive hydrothermal alteration of rock in its upper edifice, and it also has a history of large landslides that transform into lahars (K.M. Scott and others, 1995; Vallance and Scott, 1997; Reid and others, 2001). The spatial depiction of modeled lahar inundation zones accompanying this report, shown in two different map perspectives, is intended to augment (not replace) the existing hazard maps for Mount Adams (W.E. Scott and others, 1995; Vallance, 1999). The maps in this report show potential areas of inundation by lahars of different initial volumes, which are determined by a computer model, LAHARZ (Iverson and others, 1998; Schilling, 1998). One map sheet presents LAHARZ-determined inundation areas on a normal plan-view shaded-relief map of the study area; the other gives an oblique perspective of the landscape with raised topography, as if one were viewing the landscape at an angle from an aircraft (Jenny and Patterson, 2007). LAHARZ was developed after the original hazard maps (based only on mapping of geologic deposits) were made. Predicted inundation zones on these maps provide an alternative approach to estimation of areas that could be inundated as lahars of different volumes pass through the valley. However, there is considerable uncertainty in the exact location of the hazard-zone boundaries shown on these maps, as well as on earlier maps.

Washington↗

USGS1982

Massive sulfide deposits of the Southern Appalachians central Virginia volcanic-plutonic belt as a host for massive sulfide deposits

Strata-bound massive sulfide deposits of the central Virginia Piedmont occur in a volcanic- plutonic belt composed of Lower Cambrian(?) metamorphosed volcanic rocks and locally of pre-Upper Ordovician, low potassium granitoid rocks. The belt, interpreted as an ancient island arc, begins about 50 km south of Washington, D. C, and extends some 175 km south- westward. The volcanic rocks within the belt are located along the flanks of the Quantico- Columbia synclinorium and the Arvonia syncline. The Chopawamsic Formation, a western facies of the belt, consists of volcanic rocks that have the geochemical features (rare earth and immobile elements) of a tholeiitic island-arc suite; it also contains calc-alkaline components. Tholeiitic amphibolites of the Ta River Metamorphic Suite on the eastern side of the belt form an oceanward facies of the island arc, coeval with the Chopawamsic. This distribution suggests an underlying westward-dipping Cambrian(?) subduction zone. Contrasts in stratigraphy, geochemistry, and magnetic and gravity features indicate that the central Virginia volcanic- plutonic belt is not related to the Carolina slate belt as has been proposed in the past. Known sulfide bodies in the Chopawamsic and its coeval units total about 13.5 million tons. The Mineral district on the northwest flank of the Quantico-Columbia synclinorium has the largest deposits and contains about 10 million tons. Sulfide bodies in the belt consist largely of pyrite with minor sphalerite and chalcopyrite; Zn and Pb are important in a few of the smaller deposits. There are local concentrations of sphalerite and other base metal minerals within the major pyritic deposits (Zn = 1-12.5%; Cu - 1-2%; Pb as much as 5%). The dom- inantly sphaleritic deposits are found in and northward for about 15 km from the Mineral district. Sulfide mineralization is found in all types of volcanic rock, but the large sulfide bodies on the northwest flank of the Quantico-Columbia synclinorium are in felsite. Am- phibolite, containing local beds of iron-formation, is abundant on the southeast flank of the Arvonia syncline; however, most sulfide mineralization there took place in felsitic to intermediate layers. Mineralization, attributed to submarine volcanic exhalation, took place during formation of the island arc.

Economic Geology↗