Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Chemical Physics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88Linked to original sources

Suggestions as to future research in ground‐water hydrology

Determination of the ground‐water supply available from any aquifer or in any specified area requires not merely the application of specific quantitative methods but also a broad and accurate knowledge of the geologic, hydrologlc, and geochemical factors that are involved, and consideration of the economic and legal limitations. Further research is needed as to geologic texture and structure in relation to the occurrence and movement of the water; the precise nature of specific yield, which determines the effective storage capacities of the aquifers; the molecular physics involved in the downward and upward movement of water in the zone of aeration, and quantitative evaluation of ground‐water recharge and discharge; the hydraulics of ground water, as studied by pumping test methods, with special reference to boundary conditions; studies of perennial yield of aquifers of low permeability; the genesis of the mineral contents of ground water as determined through appropriate geologic, hydrologlc, and chemical studies; and methods of geophysical exploration and well logging for determining the occurrence of ground water. Serious study is also needed as to practicable methods of implementing the recently developed principles and methods of ground‐water hydrology in the production of water supplies and the economic and legal problems involved.

Eos, Transactions, American Geophysical Union↗

Groundwater quality in the Eastern Lake Ontario Basin, New York, 2008

Water samples were collected from nine production wells and nine private residential wells in the Eastern Lake Ontario Basin of New York from August through October 2008 and analyzed to characterize the chemical quality of groundwater. The wells were selected to provide adequate spatial coverage of the 3,225-square-mile study area; areas of greatest groundwater use were emphasized. Eight of the 18 wells sampled, were screened in sand and gravel aquifers, and 10 were finished in bedrock aquifers. The samples were collected and processed by standard U.S. Geological Survey procedures and were analyzed for 223 physical properties and constituents, including major ions, nutrients, trace elements, radon-222, pesticides, volatile organic compounds (VOCs), and indicator bacteria. Water quality in the study area is generally good, but concentrations of some constituents exceeded current or proposed Federal or New York State drinking-water standards; these were: color (2 samples), pH (1 sample), sodium (5 samples), chloride (1 sample), aluminum (2 samples), iron (5 unfiltered samples), manganese (3 samples), radon-222 (13 samples), and bacteria (4 samples). Dissolved-oxygen concentrations in samples from wells finished in sand and gravel [median 3.8 milligrams per liter (mg/L)] were greater than those from wells finished in bedrock (median less than 0.7 mg/L). The pH of all samples was typically neutral or slightly basic (median 7.4); the median water temperature was 11.3 degrees Celsius. The ions with the highest concentrations were bicarbonate (median 174 mg/L) and calcium (median 24.1 mg/L). Groundwater in the basin ranges from soft to moderately hard [less than or equal to 120 mg/L as CaCO3] and median hardness was 90 mg/L as CaCO3. Concentrations of nitrate plus nitrite in samples from sand and gravel wells (median concentration 0.42 mg/L as nitrogen) were generally higher than those in samples from bedrock wells (median <0.04 mg/L as nitrogen). The trace elements with the highest concentrations were strontium [median 138 micrograms per liter (mug/L)], barium (median 38.2 mug/L) and iron (median 44 mug/L). Radon-222 activities were generally high [median 500 picocuries per liter (pCi/L)]; 72 percent of all samples exceeded a proposed U.S. Environmental Protection Agency (USEPA) drinking-water standard of 300 pCi/L. Five pesticides and pesticide degradates were detected among 6 samples at concentrations of 0.03 mug/L or less; most were herbicides or their degradates. Six VOCs were detected among 9 samples at concentrations of 1.2 mug/L or less; these included 3 trihalomethanes, benzene, toluene, and xylenes. Total coliform bacteria were detected in 3 samples, and the heterotrophic plate count exceeded the USEPA maximum contaminant level (MCL) of 500 colony forming units in one sample. Fecal coliform bacteria, including Escherichia coli, were not detected in any sample.

New York↗

Fluvial sediment in Whitehead watershed and Whitehead reservoirs, Nebraska, April 1955 to September 1956

This report gives information on the physical characteristics of Whitehead Watershed and on the characteristics of the suspended sediment transported into and discharged from the reservoirs. Selected periods of significant runoff and outflow from April 1955 to September 1956 are discussed. Particle-size distribution of inflow and outflow samples indicates that all the sand entering reservoir 1 is trapped and that most of the sand entering reservoir 2 is trapped. Results of chemical analyses of water samples and a comparison of suspended-sediment size analyses in native water and in distilled water with dispersing agent indicate that significant sediment flocculation may occur in the reservoirs.

Circular↗

Upscaling of U (VI) desorption and transport from decimeter‐scale heterogeneity to plume‐scale modeling

Scientifically defensible predictions of field scale U(VI) transport in groundwater requires an understanding of key processes at multiple scales. These scales range from smaller than the sediment grain scale (less than 10 μm) to as large as the field scale which can extend over several kilometers. The key processes that need to be considered include both geochemical reactions in solution and at sediment surfaces as well as physical transport processes including advection, dispersion, and pore-scale diffusion. The research summarized in this report includes both experimental and modeling results in batch, column and tracer tests. The objectives of this research were to: (1) quantify the rates of U(VI) desorption from sediments acquired from a uranium contaminated aquifer in batch experiments;(2) quantify rates of U(VI) desorption in column experiments with variable chemical conditions, and(3) quantify nonreactive tracer and U(VI) transport in field tests.

Colorado↗

Approach for quantifying rare Earth elements at low keV

The challenges of analyzing bastnaesite (REECO3F) and hydroxylbastnaesite (REECO3OH) include beam sensitivity, quantification of light elements in a heavy element matrix, the presence of elements that cannot be analyzed with EPMA (H), and the use of x-ray lines whose physical constants are not well known. To overcome some of these challenges, Ca, La, Ce, Pr, Nd, and Sm were analyzed at 15 keV accelerating voltage and the light elements (C, O, F) were analyzed at 7 keV accelerating voltage. This approach is ideal for samples that are homogeneous within the volume analyzed. However, for the bastnaesite of interest, this solution is unsatisfactory as backscattered electron imaging reveals chemical variations at scales of less than 1 m (fig. 1). Monte Carlo simulations and wavescans of the REE M family of x-rays were evaluated to determine the best analytical approach. Monte Carlo simulations using Casino v2.42 were ran on a substrate of CeCO3F with a density of 5.00 g/cm3 at 15 keV and 7 kCV accelerating voltage. Depth distribution curves, φ(ρz), reveal x-ray generation at 15 keV for the Ce L shell x-rays approaches 1.0 m whereas the depth of Ce M shell x-ray generation at 7 keV is less than 0.4 m. Similarly, the K shell x-ray generation depth for C, O, and F at 7 keV is also less than 0.4 m. These simulations demonstrate an accelerating voltage of 7 keV or less and use of the REE M x-rays is necessary to acquire chemical information from the same volume of material for the light and heavy elements. Bastnaesite contains all REE and therefore one must consider the energy of the highest x-ray line of interest, namely the Lu M at 1.83 kV, to achieve an overvoltage (Eo/Ec) of over 2. Bastnaesite is also an insulator and requires a conductive coating, therefore 7 keV was used to avoid contributions of the coating material to the analysis given the above constraints. The USNM REE phosphate standards, Edinburgh REE glasses, CeO2, LaB6, and the metals of Sm, Dy, Gd, Er, and Yb were selected to evaluate the peak overlaps of the M family x-ray lines. The materials were coated with ~ 5nm iridium with a Leica ACE600 prior to analysis. Full spectrometer wavescans were collected at 7 keV accelerating voltage, 50 nA beam current, and 20 um beam diameter on a JEOL 8530F Plus using TAP and TAPL crystals. The step size was 0.109 mm along the length of the spectrometer with a dwell of 3 seconds at each step. M and M lines are broad and not individually resolved for the light REE but become more separated and sharper with increasing atomic number. M and M lines for each REE are also present across the spectrometer range further complicating peak interference corrections. The peak positions and overall shape for the Ce M and M lines vary with the coordination of the element. Significant shifts in position and shape were not observed when comparing the Ce M peaks of CeO2 and CePO4. Similar results were seen when comparing the available REE metal to the phosphate (Sm, Dy, Gd, Er, Yb). These wavescans suggest the use of the M or M lines if matrix matched standards are not available.

Microscopy and Microanalysis↗

Connectivity of streams and wetlands to downstream waters: An integrated systems framework

Interest in connectivity has increased in the aquatic sciences, partly because of its relevance to the Clean Water Act. This paper has two objectives: (1) provide a framework to understand hydrological, chemical, and biological connectivity, focusing on how headwater streams and wetlands connect to and contribute to rivers; and (2) briefly review methods to quantify hydrological and chemical connectivity. Streams and wetlands affect river structure and function by altering material and biological fluxes to the river; this depends on two factors: (1) functions within streams and wetlands that affect material fluxes; and (2) connectivity (or isolation) from streams and wetlands to rivers that allows (or prevents) material transport between systems. Connectivity can be described in terms of frequency, magnitude, duration, timing, and rate of change. It results from physical characteristics of a system, e.g., climate, soils, geology, topography, and the spatial distribution of aquatic components. Biological connectivity is also affected by traits and behavior of the biota. Connectivity can be altered by human impacts, often in complex ways. Because of variability in these factors, connectivity is not constant but varies over time and space. Connectivity can be quantified with field‐based methods, modeling, and remote sensing. Further studies using these methods are needed to classify and quantify connectivity of aquatic ecosystems and to understand how impacts affect connectivity.

Journal of the American Water Resources Associatio↗

A chemical and bio‐herbicide mixture increased exotic invaders, both targeted and non‐targeted, across a diversely invaded landscape after fire

Questions Invasive‐plant treatments often target a single or few species, but many landscapes are diversely invaded. Exotic annual grasses (EAGs) increase wildfires and degrade native perennial plant communities in cold‐desert rangelands, and herbicides are thus sprayed to inhibit EAG germination and establishment. We asked how EAG target and non‐target species responded to an herbicide mixture sprayed over a large, topographically diverse landscape after wildfire. We focused on how whole‐community and natural EAG‐pathogen treatment responses varied over years and physical properties of sites. Location Sagebrush steppe of southwest Idaho, USA. Methods We monitored plant cover and diversity in 41 pairs of plots located inside or outside areas (486 ha total) treated with a combined aerial broadcast spray of pre‐emergent herbicide (imazapic) and weed‐suppressive bacteria ( Pseudomonas fluorescens , “MB906”) to target EAGs after wildfires. Results EAG cover and exotic species richness were initially less in treated plots but increased to levels similar to or greater than those of untreated plots by the third post‐treatment year. The EAG pathogen Ustilago bullata was not directly affected by the treatment. The treatment increased exotic perennial forb cover in all plots and exotic annual forb cover in cooler/wetter plots but reduced exotic annual forb cover in warmer/drier plots. Cover of the invasive biennial grass Poa bulbosa decreased more across study years in untreated than treated plots. Among natives, the treatment reduced perennial grass cover and annual forb presence but led to marginal increases in perennial forb cover and, on soils with less gravel, increased shrub presence. Conclusions A treatment targeting a single plant functional group did not achieve lasting success in these diversely invaded communities. Spraying alone did not release native perennials sufficiently to counteract the simultaneous release of secondary invaders and the return of target invaders. Planting or seeding may also be needed to achieve management goals.

Idaho↗

In‐stream sorption of fulvic acid in an acidic stream: A stream‐scale transport experiment

The variation of concentration and composition of dissolved organic carbon (DOC) in stream waters cannot be explained solely on the basis of soil processes in contributing subcatchments. To investigate in‐stream processes that control DOC, we injected DOC‐enriched water into a reach of the Snake River (Summit County, Colorado) that has abundant iron oxyhydroxides coating the streambed. The injected water was obtained from the Suwannee River (Georgia), which is highly enriched in fulvic acid. The fulvic acid from this water is the standard reference for aquatic fulvic acid for the International Humic Substances Society and has been well characterized. During the experimental injection, significant removal of sorbable fulvic acid occurred within the first 141 m of stream reach. We coinjected a conservative tracer (lithium chloride) and analyzed the results with the one‐dimensional transport with inflow and storage (OTIS) stream solute transport model to quantify the physical transport mechanisms. The downstream transport of fulvic acid as indicated by absorbance was then simulated using OTIS with a first‐order kinetic sorption rate constant applied to the sorbable fulvic acid. The “sorbable” fraction of injected fulvic acid was irreversibly sorbed by streambed sediments at rates (kinetic rate constants) of the order of 10 −4 –10 −3 s −1 . In the injected Suwannee River water, sorbable and nonsorbable fulvic acid had distinct chemical characteristics identified in 13 C‐NMR spectra. The 13 C‐NMR spectra indicate that during the experiment, the sorbable “signal” of greater aromaticity and carboxyl content decreased downstream; that is, these components were preferentially removed. This study illustrates that interactions between the water and the reactive surfaces will modify significantly the concentration and composition of DOC observed in streams with abundant chemically reactive surfaces on the streambed and in the hyporheic zone.

Water Resources Research↗

Selected hydrogeologic data from the Judith Basin, central Montana

Selected hydrogeologic data from the Judith basin, central Montana, have been compiled for use as the physical basis of a ground-water model prepared as part of a 4-year study of Cenozoic and Mesozoic aquifers of the northern Great Plains area of Montana. Records of Cenozoic and Mesozoic aquifers of the northern Great Plains area of Montana. Records of 1,124 wells and 640 springs are tabulated in the report; most of these data have been collected since 1959. Lithologic logs of 68 wells are also included. Chemical data for wells and springs include 290 water samples analyzed for major cation and anion concentrations and 282 water samples analyzed for miscellaneous-constituent concentrations. The locations of wells and springs listed in the report are shown on a map at a scale of 1:250,000. (USGS)

Open-File Report↗

Landscape linkages between geothermal activity and solute composition and ecological response in surface waters draining the Atlantic slope of Costa Rica

Surface waters draining three different volcanoes in Costa Rica, ranging from dormant to moderately active to explosive, have a wide range of solute compositions that partly reflects the contribution of different types of solute-rich, geothermal waters. Three major physical transport vectors affect flows of geothermally derived solutes: thermally driven convection of volcanic gases and geothermal fluids; lateral and gravity-driven downward transport of geothermal fluids; and wind dispersion of ash, gases, and acid rain. Specific vector combinations interact to determine landscape patterns in solute chemistry and biota: indicator taxa of algae and bacteria reflect factors such as high temperature, wind-driven or hydrologically transported acidity, high concentrations of various solutes, and chemical precipitation reactions. Many streams receiving geothermally derived solutes have high levels of soluble reactive phosphorus (SRP) (up to 400 µ g liter −1 ), a nutrient that is typically not measured in geochemical studies of geothermal waters. Regional differences in levels of SRP and other solutes among volcanoes were typically not significant due to high local variation in solute levels among geothermally modified streams and between geothermally modified and unmodified streams on each volcano. Geothermal activity along the volcanic spine of Costa Rica provides a natural source of phosphorus, silica, and other solutes and plays an important role in determining emergent landscape patterns in the solute chemistry of surface waters and aquatic biota.

Limnology and Oceanography↗

Hydrothermal contamination of public supply wells in Napa and Sonoma Valleys, California

Groundwater chemistry and isotope data from 44 public supply wells in the Napa and Sonoma Valleys, California were determined to investigate mixing of relatively shallow groundwater with deeper hydrothermal fluids. Multivariate analyses including Cluster Analyses, Multidimensional Scaling (MDS), Principal Components Analyses (PCA), Analysis of Similarities (ANOSIM), and Similarity Percentage Analyses (SIMPER) were used to elucidate constituent distribution patterns, determine which constituents are significantly associated with these hydrothermal systems, and investigate hydrothermal contamination of local groundwater used for drinking water. Multivariate statistical analyses were essential to this study because traditional methods, such as mixing tests involving single species (e.g. Cl or SiO 2 ) were incapable of quantifying component proportions due to mixing of multiple water types. Based on these analyses, water samples collected from the wells were broadly classified as fresh groundwater, saline waters, hydrothermal fluids, or mixed hydrothermal fluids/meteoric water wells. The Multivariate Mixing and Mass-balance (M3) model was applied in order to determine the proportion of hydrothermal fluids, saline water, and fresh groundwater in each sample. Major ions, isotopes, and physical parameters of the waters were used to characterize the hydrothermal fluids as Na–Cl type, with significant enrichment in the trace elements As, B, F and Li. Five of the wells from this study were classified as hydrothermal, 28 as fresh groundwater, two as saline water, and nine as mixed hydrothermal fluids/meteoric water wells. The M3 mixing-model results indicated that the nine mixed wells contained between 14% and 30% hydrothermal fluids. Further, the chemical analyses show that several of these mixed-water wells have concentrations of As, F and B that exceed drinking-water standards or notification levels due to contamination by hydrothermal fluids.

California↗

Detection of crystalline hematite mineralization on Mars by the Thermal Emission Spectrometer: evidence for near-surface water

The Thermal Emission Spectrometer (TES) instrument on the Mars Global Surveyor (MGS) mission has discovered a remarkable accumulation of crystalline hematite (α-Fe 2 O 3 ) that covers an area with very sharp boundaries approximately 350 by 350–750 km in size centered near 2°S latitude between 0° and 5°W longitude (Sinus Meridiani). Crystalline hematite is uniquely identified by the presence of fundamental vibrational absorption features centered near 300, 450, and >525 cm −1 and by the absence of silicate fundamentals in the 1000 cm −1 region. Spectral features resulting from atmospheric CO 2 , dust, and water ice were removed using a radiative transfer model. The spectral properties unique to Sinus Meridiani were emphasized by removing the average spectrum of the surrounding region. The depth and shape of the hematite fundamental bands show that the hematite is crystalline and relatively coarse grained (>5–10 μm). Diameters up to and greater than hundreds of micrometers are permitted within the instrumental noise and natural variability of hematite spectra. Hematite particles <5–10 μm in diameter (as either unpacked or hard-packed powders) fail to match the TES spectra. The spectrally derived areal abundance of hematite varies with particle size from ∼10% (>30 μm diameter) to 40–60% (10 μm diameter). The hematite in Sinus Meridiani is thus distinct from the fine-grained (diameter <5–10 μm), red, crystalline hematite considered, on the basis of visible, near-IR data, to be a minor spectral component in Martian bright regions like Olympus-Amazonis. Sinus Meridiani hematite is closely associated with a smooth, layered, friable surface that is interpreted to be sedimentary in origin. This material may be the uppermost surface in the region, indicating that it might be a late stage sedimentary unit or a layered portion of the heavily cratered plains units. We consider five possible mechanisms for the formation of coarse-grained, crystalline hematite. These processes fall into two classes depending on whether they require a significant amount of near-surface water: the first is chemical precipitation that includes origin by (1) precipitation from standing, oxygenated, Fe-rich water (oxide iron formations), (2) precipitation from Fe-rich hydrothermal fluids, (3) low-temperature dissolution and precipitation through mobile ground water leaching, and (4) formation of surface coatings, and the second is thermal oxidation of magnetite-rich lavas. Weathering and alteration processes, which produce nanophase and red hematite, are not consistent with the coarse, crystalline hematite observed in Sinus Meridiani. We prefer chemical precipitation models and favor precipitation from Fe-rich water on the basis of the probable association with sedimentary materials, large geographic size, distance from a regional heat source, and lack of evidence for extensive groundwater processes elsewhere on Mars. The TES results thus provide mineralogic evidence for probable large-scale water interactions. The Sinus Meridiani region may be an ideal candidate for future landed missions searching for biotic and prebiotic environments, and the physical characteristics of this site satisfy all of the engineering requirements for the missions currently planned.

Journal of Geophysical Research E: Planets↗

Biogeochemical evolution of a landfill leachate plume, Norman, Oklahoma

Leachate from municipal landfills can create groundwater contaminant plumes that may last for decades to centuries. The fate of reactive contaminants in leachate-affected aquifers depends on the sustainability of biogeochemical processes affecting contaminant transport. Temporal variations in the configuration of redox zones downgradient from the Norman Landfill were studied for more than a decade. The leachate plume contained elevated concentrations of nonvolatile dissolved organic carbon (NVDOC) (up to 300 mg/L), methane (16 mg/L), ammonium (650 mg/L as N), iron (23 mg/L), chloride (1030 mg/L), and bicarbonate (4270 mg/L). Chemical and isotopic investigations along a 2D plume transect revealed consumption of solid and aqueous electron acceptors in the aquifer, depleting the natural attenuation capacity. Despite the relative recalcitrance of NVDOC to biodegradation, the center of the plume was depleted in sulfate, which reduces the long-term oxidation capacity of the leachate-affected aquifer. Ammonium and methane were attenuated in the aquifer relative to chloride by different processes: ammonium transport was retarded mainly by physical interaction with aquifer solids, whereas the methane plume was truncated largely by oxidation. Studies near plume boundaries revealed temporal variability in constituent concentrations related in part to hydrologic changes at various time scales. The upper boundary of the plume was a particularly active location where redox reactions responded to recharge events and seasonal water-table fluctuations. Accurately describing the biogeochemical processes that affect the transport of contaminants in this landfill-leachate-affected aquifer required understanding the aquifer's geologic and hydrodynamic framework.

Oklahoma↗

Stable isotopes in mineralogy

Stable isotope fractionations between minerals are functions of the fundamental vibrational frequencies of the minerals and therefore bear on several topics of mineralogical interest. Isotopic compositions of the elements H, C, O, Si, and S can now be determined routinely in almost any mineral. A summary has been made of both published and new results of laboratory investigations, analyses of natural materials, and theoretical considerations which bear on the importance of temperature, pressure, chemical composition and crystal structure to the isotopic properties of minerals. It is shown that stable isotope studies can sometimes provide evidence for elucidating details of crystal structure and can be a powerful tool for use in tracing the reaction paths of mineralogical reactions. ?? 1977 Springer-Verlag.

Physics and Chemistry of Minerals↗

Extraformational sediment recycling on Mars

Extraformational sediment recycling (old sedimentary rock to new sedimentary rock) is a fundamental aspect of Earth’s geological record; tectonism exposes sedimentary rock, whereupon it is weathered and eroded to form new sediment that later becomes lithified. On Mars, tectonism has been minor, but two decades of orbiter instrument–based studies show that some sedimentary rocks previously buried to depths of kilometers have been exposed, by erosion, at the surface. Four locations in Gale crater, explored using the National Aeronautics and Space Administration’s Curiosity rover, exhibit sedimentary lithoclasts in sedimentary rock: At Marias Pass, they are mudstone fragments in sandstone derived from strata below an erosional unconformity; at Bimbe, they are pebble-sized sandstone and, possibly, laminated, intraclast-bearing, chemical (calcium sulfate) sediment fragments in conglomerates; at Cooperstown, they are pebble-sized fragments of sandstone within coarse sandstone; at Dingo Gap, they are cobble-sized, stratified sandstone fragments in conglomerate derived from an immediately underlying sandstone. Mars orbiter images show lithified sediment fans at the termini of canyons that incise sedimentary rock in Gale crater; these, too, consist of recycled, extraformational sediment. The recycled sediments in Gale crater are compositionally immature, indicating the dominance of physical weathering processes during the second known cycle. The observations at Marias Pass indicate that sediment eroded and removed from craters such as Gale crater during the Martian Hesperian Period could have been recycled to form new rock elsewhere. Our results permit prediction that lithified deltaic sediments at the Perseverance (landing in 2021) and Rosalind Franklin (landing in 2023) rover field sites could contain extraformational recycled sediment.

Geosphere↗

Physical data of soil profiles formed on late Quaternary marine terraces near Santa Cruz, California

The marine terraces in and around Santa Cruz, California, represent a set of well-preserved terraces formed as a product of geology, sea level, and climate. A marine terrace begins as a wave cut platform. Eustatic sea level changes, seacliff erosion, and tectonic uplift work together to generate marine terraces. "When a wave-cut platform is raised (due to tectonic activity) above sea level and cliffed by wave action it becomes a marine terrace" (Bradley, 1957, p. 424). During glacial periods, eustatic sea level is estimated to have dropped by 150 meters (Fairbanks, 1989). Cliff retreat measured from aerial photographs between 1930 and 1980 vary from 0.0 to 0.2 m yr–1 (Best and Griggs, 1991). Estimates of uplift rates along the Santa Cruz coastline vary from 0.10 to 0.48 m kyr–1 (Bradley and Griggs, 1976; Weber and others, 1999). Uplift mechanisms include coseismic uplift associated both with a reverse component of slip on the steeply SW dipping Loma Prieta fault in the restraining bend of the San Andreas Fault and a small component of reverse slip on the steeply SE dipping San Gregorio fault (Anderson and Menking 1994). Previous work studying physical properties on these terraces include Pinney and others (in press) and Aniku (1986) and Bowman and Estrada (1980). Sedimentary deposits of the marine terraces are a mixture of terrestrial and marine sediments but generally consist of a sheet of marine deposits overlying the old platform and a wedge of nonmarine deposits banked against the old sea cliff (Bradley, 1957). Bedrock underlying the terraces in the Santa Cruz area is generally either Santa Margarita Sandstone or Santa Cruz Mudstone. The Santa Margarita Sandstone represents an upper Miocene, transgressive, tidally dominated marine-shelf deposit with crossbedded sets of sand and gravel and horizontally stratified and bioturbated invertebrate-fossils beds (Phillips, 1990). The siliceous Santa Cruz Mudstone, of late Miocene age, conformably overlies the Santa Margarita Sandstone. The Santa Cruz Mudstone is a thin to medium-bedded siliceous mudstone with nonsiliceous mudstone and siltstone and minor amounts of sandstone. The siliceous nature implies organic deposition in a quiescent, deep-water environment. Bedrock is mantled by 1–4 meters of medium to coarse-grained regressive beach sediment and fluvial deposits from the Ben Lomond Mountains. Terrace age increases with elevation above sea level, and weathering of primary minerals increases with age. The suite of soils formed on the terraces is referred to as a soil chronosequence. Soil chronosequences, important tools in characterizing natural weathering rates, are defined as a group of soils that differ in age and therefore in duration of weathering but have similar climatic conditions, vegetation, geomorphic position, and parent material (Jenny, 1941; Birkland, 1999). Soils are frequently useful indicators of geomorphic age (Muhs, 1982; Switzer and others, 1988) and are a function of pedogenic and/or eolian processes. Some aspects of soil development can be episodic but when viewed on large time scales can be perceived as continuous (Switzer and others, 1988). The age of the soil may be constrained by the age of the deposit, since soil formation generally commences when deposition has ceased (Birkland, 1999). Dating of the terraces provides an unprecedented opportunity to study weathering and soil-formation rates (Perg and others, 2001; Hanks and others, 1984; Bradley and Griggs, 1976; Bradley and Addicott, 1968; Bradley, 1956). Ages of the terraces recently dated by cosmogenic radionuclide are, starting with the youngest, 65, 92, 137, 139, and 226 k.y. (Perg and others, 2001). However, these ages are much younger than recent radiometric dates on mollusk shells (Muhs, U.S. Geological Survey, personal communication, 2002; Bradley and Addicott, 1968). For this study, soils were sampled on five terraces. Terrace one in the Lighthouse Field along Westcliff in Santa Cruz was the last site selected, and this report contains minimal data on this terrace. Sites on the second, third, and fourth terraces are located in Wilder Ranch, Santa Cruz, California. Site five is on private property north of Wilder Ranch. Careful consideration was taken in selecting field sites, choosing locations in a topographically flat area to avoid effects of erosion, and trying to keep parent material similar. This report contains physical properties of the soil profiles on four of the five marine terraces near Santa Cruz, California, excluding the youngest terrace in all tables except 6 and 7. Data includes field descriptions, bulk density, grain size analyses, weight percent magnetic fraction, and the soil development index. Soil properties are important when trying to understand the chemistry of a given profile or when comparing profiles. Grain size constrains the movement of water in a profile, thus controlling movement of chemicals and weathering rates. Bulk density is a useful property to calculate chemical inventory. Quantifying the magnetic fraction aids in understanding the Fe inventory for these soils. The soil development index is a semi-quantitative way to define the degree of development of a soil profile. This is a useful way to compare development of profiles for this chronosequence or compare the Santa Cruz terraces to a suit of other terraces or another chronosequence.

California↗

Occurrence and distribution of fish species in the Great and Little Miami River basins, Ohio and Indiana, pre-1900 to 1998

Historically, 133 fish species representing 25 families have been documented in the Great and Little Miami River Basins. Of these, 132 species have been reported in the basins since 1901, 123 since 1955, 117 since 1980, and 113 post-1990. Natural processes and human activities have both been shown to be major factors in the alteration of fish-community structure and the decrease in species diversity. In the late 1800's, dam construction and the removal of riparian zones restricted fish migration and altered habitat. Industrialization and urbanization increased considerably in the 1900's, further degrading stream habitat and water quality. Species requiring riffles and clean, hard stream bottoms were the most adversely affected. The use of agricultural and industrial chemicals prompted fish-consumption advisories and an increase in studies reporting the occurrence of external fish anomalies. Over the last 20 years, water quality has improved in part because of the upgrading of wastewater-treatment facilities; and, as a result, many streams of the Great and Little Miami River Basins generally meet or exceed existing water-quality standards. Although significant improvements have occurred in the basins, continued efforts to improve water quality and restore the physical habitat of streams will be necessary to increase fish abundance and biodiversity.

Indiana, Ohio↗

Global significance of a sub-Moho boundary layer (SMBL) deduced from high-resolution seismic observations

We infer the fine structure of a sub-Moho boundary layer (SMBL) at the top of the lithospheric mantle from high-resolution seismic observations of Peaceful Nuclear Explosions (PNE) on superlong-range profiles in Russia. Densely recorded seismograms permit recognition of previously unknown features of teleseismic propagation of the well known Pn and Sn phases, such as a band of incoherent, scattered, high-frequency seismic energy, developing consistently from station to station, apparent velocities of sub-Moho material, and high-frequency energy to distances of more than 3000 km with a coda band, incoherent at 10 km spacing and yet consistently observed to the end of the profiles. Estimates of the other key elements of the SMBL were obtained by finite difference calculations of wave propagation in elastic 2D models from a systematic grid search through parameter space. The SMBL consists of randomly distributed, mild velocity fluctuations of 2% or schlieren of high aspect ratios (???40) with long horizontal extent (???20 km) and therefore as thin as 0.5 km only; SMBL thickness is 60-100 km. It is suggested that the SMBL is of global significance as the physical base of the platewide observed high-frequency phases Pn and Sn. It is shown that wave propagation in the SMBL waveguide is insensitive to the background velocity distribution on which its schlieren are superimposed. This explains why the Pn and Sn phases traverse geological provinces of various age, heat flow, crustal thickness, and tectonic regimes. Their propagation appears to be independent of age. temperature, pressure, and stress. Dynamic stretching of mantle material during subduction or flow, possibly combined with chemical differentiation have to be considered as scale-forming processes in the upper mantle. However, it is difficult to distinguish with the present sets of Pn/Sn array data whether (and also where) the boundary layer is a frozen-in feature of paleo-processes or whether it is a response to an on-going processes; nevertheless, the derived quantitative estimates of the SMBL properties provide important constraints for any hypothesis on scale-forming processes. Models to be tested by future numerical and field experiments are, for example, repeated subduction-convection stretching of oceanic lithosphere (marble-cake model) and schlieren formation at mid-ocean ridges. It is also proposed that the modeling of the observed blocking of Sn and Pn propagation at active plate margins offers a new tool to study the depth range of tectonics below the crust-mantle boundary. Finally, the deduced schlieren structure of the SMBL closes an important scale gap of three to four orders of magnitude between structural dimensions studied in petrological analysis of mantle samples (xenoliths or outcrop of oceanic lithosphere) and those imaged in classical seismological studies of the lithosphere.

International Geology Review↗