Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Alaska”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88Linked to original sources

An inverted metamorphic field gradient in the central Brooks Range, Alaska and implications for exhumation of high-pressure/low-temperature metamorphic rocks

During exhumation of the Brooks Range internal zone, amphibolite-facies rocks were emplaced atop the blueschist/greenschist facies schist belt. The resultant inverted metamorphic field gradient is mappable as a series of isograds encountered as one traverses up structural section. Amphibolite-facies metamorphism occurred at ??? 110 Ma as determined from 40Ar 39Ar analysis of hornblende. This contrasts with 40Ar 39Ar phengite cooling ages from the uderlying schist belt, which are clearly older (by 17-22 m.y.). Fabrics in both the amphibolite-facies rocks and schist belt are characterized by repeated cycles of N-vergent crenulation and transposition that was likely associated with out-of-sequence ductile thrusting in the internal zone of the Brooks Range orogen. Contractional deformation occurred in an overall environment of foreland-directed tectonic transport, broadly synchronous with exhumation of the internal zone, and shortening within the thin-skinned fold and thrust belt. These data are inconsistent with a recently postulated mid-Cretaceous episode of lithospheric extension in northern Alaska. ?? 1994.

LITHOS↗

Influence of grounding ice on the Arctic shelf of Alaska

Alaska's Beaufort Sea shelf is characterized by small-scale relief with an average amplitude of 1–2 m and wavelength of 50–100 m. Diving observations confirm that much of the bottom roughness reflects the action of grounded ice. Except for areas in the shadow of islands, bars, and offshore bathymetric highs, the entire shelf surface from the beach to at least the 75-m contour is now or has been modified by ice gouging. Ice contact with the bottom is more common, and rates of sedimentation higher on the inner shelf than on the outer shelf; the density of gouge features is about equal in both areas. Therefore, the chances are that an area of gouging on the inner shelf contains younger gouges than a similar area on the outer shelf. When ice grounds, it becomes an important agent in the sedimentary and morphologic environment of the Arctic shelf, directly by deforming bottom deposits and secondarily by affecting the current regime near the sediment/ice contact. While bulldozing action and rafting do not seem to contribute significantly to the direct transport of sediment, re-suspension of bottom material during bulldozing, which makes sediment available for transport, may be significant.

Alaska↗

Arctic continental shelf morphology related to sea-ice zonation, Beaufort Sea, Alaska

Landsat-1 and NOAA satellite imagery for the winter 1972–1973, and a variety of ice and sea-floor data were used to study sea-ice zonation and dynamics and their relation to bottom morphology and geology on the Beaufort Sea continental shelf of arctic Alaska. In early winter the location of the boundary between undeformed fast ice and westward-drifting pack ice of the Pacific Gyre is controlled by major coastal promontories. Pronounced linear pressure- and shear-ridges, as well as hummock fields, form along this boundary and are stabilized by grounding, generally between the 10- and 20-m isobaths. Slippage along this boundary occurs intermittently at or seaward of the grounded ridges, forming new grounded ridges in a widening zone, the stamukhi zone, which by late winter extends out to the 40-m isobath. Between intermittent events along the stamukhi zone, pack-ice drift and slippage is continuous along the shelf edge, at average rates of 3–10 km/day. Whether slippage occurs along the stamukhi zone or along the shelf edge, it is restricted to a zone several hundred meters wide, and ice seaward of the slip face moves at uniform rates without discernible drag effects. A causal relationship is seen between the spatial distribution of major ice-ridge systems and offshore shoals downdrift of major coastal promontories. The shoals appear to have migrated shoreward under the influence of ice up to 400 m in the last 25 years. The sea floor seaward of these shoals within the stamukhi zone shows high ice-gouge density, large incision depths, and a high degree of disruption of internal sedimentary structures. The concentration of large ice ridges and our sea floor data in the stamukhi zone indicate that much of the available marine energy is expended here, while the inner shelf and coast, where the relatively undeformed fast ice grows, are sheltered. There is evidence that anomalies in the overall arctic shelf profile are related to sea-ice zonation, ice dynamics, and bottom processes. A proposed ice zonation, including zones of (1) bottom-fast ice, (2) floating fast ice, (3) stamukhi, and (4) seasonal pack ice, emphasizes ice interaction with the shelf surface and differs from previous zonation. Certain aspects of the results reported here are directly applicable to planned offshore developments in the Prudhoe Bay oil field. Properly placed artificial structures similar to offshore shoals should be able to withstand the forces of the ice, serve to modify the observed ice zonation, and might be used to make the environment less hostile to human activities.

Alaska↗

Submarine valleys in the northeastern Gulf of Alaska: Characteristics and probable origin

The continental shelf of the northeastern Gulf of Alaska Between Prince William Sound and Cross Sound is cut by at least eight major valleys. From west to east, these are Hinchinbrook Seavalley, Egg Island Trough, Kayak Trough, Bering Trough, Pamplona Troughs, Yakutat Valley, Alsek Valley and Yakobi Valley. Evidence common to most of these troughs or valleys indicating that the present morphology is due to glacial processes includes: (1) a pre-Holocene subbottom erosional surface incised into the underlying lithified strata of the shelf; (2) U-shaped cross sections, both at the sea floor and at the pre-Holocene erosional surface; (3) concave longitudinal sections, commonly shoaling at the seaward end; (4) till-like sediments collected from the walls or outer shelf adjacent to the troughs; and (5) seismic stratigraphy that can be correlated with bottom samples indicative of glacially derived strata. Depressions with tens of meters of relief are present on the pre-Holocene subbottom erosional surface beneath most of these valleys. These depressions have been partially filled by a seaward-thinning wedge of Holocene glacial flour (clayey silt) that is filling the valleys and blanketing the inner shelf at rates as high as 15 mm/yr (based on 210 Pb measurements). Although glaciation played a dominant role in the modern morphology of these sea valleys, structural features, including structurally controlled topographic highs on the shelf (e.g. Tarr Bank, Kayak Island, Pamplona Spur and Fairweather Ground) influenced the flow directions of the glacial lobes.

Alaska↗

Interlaminated ice-proximal glacimarine sediments in Muir Inlet, Alaska

Muir Inlet in Glacier Bay, Alaska, is a glacial fjord receiving a tremendous volume of sediment annually. The rate of sediment accumulation is greatest proximal to Muir Glacier (about 9 m yr −1 ) and decreases away from the glacier. The primary sediment sources are meltwater streams discharging at subglacial and ice-marginal positions to form overflows, interflows, and underflows (continuous turbidity currents). Overflows and interflows interact with diurnal tidal currents and their volume and sediment concentration varies diurnally and annually with meltwater discharge. These effects produce cyclic deposits of a thin fine-grained sand or silt lamina that grades normally to a thicker poorly to very poorly sorted mud lamina. This lamina couplet is termed a cyclopel . Underflows are suggested to occur in this glacimarine environment because of conditions unique to subglacial fluvial systems. Underflow deposits occur only in proximal positions (<0.5 km from glacier face), and are coarse-grained, reverse to normal graded, and exhibit an increase in sorting and sand content up-layer. Ice-rafted debris (identified as particles >177 μ m) is ubiquitous, though low (<5% by weight), and occurs as isolated particles, frozen pellets, or as lenses that in cores may have a lamina appearance. Proximally, ice-rafted debris is difficult to identify because proximal sediment is often as coarse-grained. Deposited sediment may be reworked by tidal currents, and sediment gravity flows. Depositional processes operating in Muir Inlet produce interlaminated sand/silt/clay that characterizes sediment proximal to a glacier and fines seaward to mud. Sediment is classified into one of three sediment types: (1) Type I sediment is very fine grained (mean 8.65--7.17 ~), low in sand (0.1--11.2%), and very poorly to poorly sorted. It is the dominant sediment type in Muir Inlet, and is transported by plumes and deposited by suspension settling. (2) Type II sediment is fine- to coarse-grained (mean 6.70--3.12 ~), low to high in sand (5.1---86.6%), and very poorly to moderately sorted. It represents reworked sediment, proximal plume deposits, or coarse-grained laminae of cyclopels. (3) Type III sediment is coarse-grained (mean 3.89--2.38 ~), high in sand (58.0--100.0%), and poorly to well sorted. It is deposited by sediment gravity flows or underflows.

Alaska↗

Ice erosion of a sea-floor knickpoint at the inner edge of the stamukhi zone, Beaufort Sea, Alaska

In 1981 and 1982, detailed bathymetric and side-scan sonar surveys were made of an area of the sea floor north of Prudhoe Bay, Alaska, to study the changing characteristics of the seabed at the inner boundary of the stamukhi zone, the coast-parallel zone of grounded ice ridges that occurs in water depths between 15 and 50 m in the arctic. The fathograms and sonographs resolved 10-cm features and electronic navigation gave relocations accurate to about 10 m. Year after year an ice boundary develops at the inner edge of the stamukhi zone where major shear and pressure deformation occur in about the same location. Associated with this ice boundary, the bathymetry shows a pronounced break in slope — the knickpoint — on the shelf profile at about 20 m depth. The 2–3 m-high knickpoint is cut in a consolidated gravelly mud of pre-Holocene age. A well-defined gravel and cobble shoal a few meters high usually occurs at the inshore edge of the knickpoint. The sonograph mosaic shows that seaward of the knickpoint, ice gouges saturate the sea floor and are well defined; inshore the gouges are fewer in number and are poorly defined on the records. Few gouges can be traced from the seaward side of the knickpoint across the shoals to the inshore side of the knickpoint. Studies of ice gouging rates in two seabed corridors that cross the stamukhi zone reveal the highest rates of gouging seaward of the knickpoint. We believe that the knickpoint results from ice erosion at the inner boundary of the stamukhi zone. Intensified currents associated with this boundary winnow away fine sediments. Ice bulldozing and currents shape the shoals, which perch atop the knickpoint. The knickpoint helps to limit ice forces on the seabed inshore of the stamukhi zone.

Marine Geology↗

Glacimarine sedimentary processes, facies and morphology of the south-southeast Alaska shelf and fjords

High precipitation from Gulf of Alaska air masses can locally reach up to 800 cm a −1 . This precipitation on tectonically active mountains creates cool-temperate glaciation with extremely active erosion and continuously renewed resources. High basal debris loads up to 1.5 m thick of pure debris and rapid glacial flow, which can be more than 3000 m a −1 , combine to produce large volumes of siliciclastic glacimarine sediment at some of the highest sediment accumulation rates on record. At tidewater fronts of valley glaciers, sediment accumulation rates can be over 13 m a −1 and deltas commonly grow at about 10 6 m 3 a −1 . Major processes influencing glacimarine sedimentation are glacial transport and glacier-contact deposition, meltwater (subaerial and submarine) and runoff transport and deposition, iceberg rafting and gouging, sea-ice transport, wave action and storm reworking, tidal transport and deposition, alongshelf transport, sliding and slumping and gravity flows, eolian transport, and biogenic production and reworking. Processes are similar in both shelf and fjord settings; however, different intensities of some processes create different facies associations and geometries. The tectonoclimatic regime also controls morphology because bedrock structure is modified by glacial action. Major glacimarine depositional systems are all siliciclastic. They are subglacial, marginal-morainal bank and submarine outwash, and proglacial/paraglacial-fluvial/deltaic, beach, tidal flat/estuary, glacial fjord, marine outwash fjord and continental shelf. Future research should include study of long cores with extensive dating and more seismic surveys to evaluate areal and temporal extent of glacial facies and glaciation; time-series oceanographic data, sidescan sonar surveys and submersible dives to evaluate modern processes; biogenic diversity and production to evaluate paleoecological, paleobiogeographic and biofacies analysis; and detailed comparisons of exposed older rock of the Yakataga Formation to evaluate how glacial style has evolved over 6.3 Ma.

Marine Geology↗

Hydrocarbons in oil residues on beaches of islands of Prince William Sound, Alaska

Aliphatic and aromatic hydrocarbons were measured on oil residues from beaches on six islands in Prince William Sound, Alaska. In addition to altered products from the Exxon Valdez oil spill of 1989, we also found, at two widely separated locations, residues that are similar to each other but chemically distinct from the spilled oil. Terpanes, steranes, monoaromatic steranes, and carbon isotopic compositions of total extracts were most useful in correlating the altered products of the spilled oil. These same parameters revealed that the two non-Valdez samples are likely residues of oil originally produced in California. The results indicate that oil residues currently on the beaches of this estuary have at least two quite different origins.

Marine Pollution Bulletin↗

Preliminary results, Central Gneiss Complex of the Coast Range batholith, southeastern Alaska: the roots of a high-K, calc-alkaline arc?

The Central Gneiss Complex (CGC) of the Coast Range batholith is the oldest unit of the batholith east of Ketchikan, Alaska, being dated by the zircon UPb method (by T.W. Stern) at 128-140 Ma. Heterogeneous, layered, commonly migmatitic, orthogneiss of hornblende-biotite quartz diorite, tonalite, quartz monzodiorite and granodiorite compositions (IUGS terminology) form the major part of the CGC. These gneisses show a range of 50-65% SiO2 and are high in Al2O3 (c. 15-19%), K2O (1.5-4%) and Sr (800-900 ppm). Most major elements show coherent, typically magmatic trends with SiO2. La and Rb show maxima at ??? 58% SiO2. Initial 87Sr/86Sr ratios are relatively high and range from 0.7052 to 0.7066. Wallrocks of the CGC are mostly metagraywacke, pelite and metavolcanic rocks at amphibolite facies; they are geochemically dissimilar to the CGC. Major and minor elements of the CGC are very similar to those of high-K orogenic, calc-alkaline andesitic suites. The CGC may have formed largely by fractionation of mantle-derived, high AlKSr basaltic liquid in an ascending diapir, having hornblende, plagioclase, and biotite as major precipitating phases. The CGC probably represents the plutonic equivalent of a continental-margin or Andean arc that formed when the Taku terrane of the Insular belt on the west collided with the previously emplaced (but also allochthonous) Stikine terrane on the east in Late Jurassic or Early Cretaceous time. ?? 1984.

Physics of the Earth and Planetary Interiors↗

An Anvilian (early pleistocene) marine fauna from western Seward Peninsula, Alaska

Cover sediments of the York Terrace exposed near the California River, western Seward Peninsula, Alaska, yield mollusks, ostracodes, and foraminifera that lived during the Anvilian transgression of early Pleistocene age. The fossiliferous sediments lie at the inner edge of the York Terrace, a deformed wave-cut platform that extends eastward from Bering Strait along much of the southern coast of Seward Peninsula. The seaward margin is truncated by the little-deformed Lost River Terrace, carved during the Pelukian (Sangamonian) transgression. The early Pleistocene sediments seem to have been deposited between the first and second of four glaciations for which evidence can be found in the California River area. The California River fauna includes several extinct species and several species now confined to areas as remote as the northwestern Pacific and north Atlantic. The fauna probably lived in water temperatures much like those of the present time but deeper water on the Bering Shelf is suggested. The presence of an early Pleistocene fauna at the inner edge of the York Terrace at California River shows that the terrace was largely carved before and during early Pleistocene time. However, a marine fauna apparently of middle Pleistocene age is found on the York Terrace near Cassiterite Peak, and this seems to indicate that the terrace remained low until middle Pleistocene time. Uplift of the York Terrace probably was accompanied by uplift of Bering Strait. The strait may have been deeper, and there may have been no land bridge between the Seward Peninsula of Alaksa and the Chukotka Peninsula of Siberia during most of early and middle Pleistocene time.

Alaska↗

The Hayes tephra deposits, and upper Holocene marker horizon in south-central Alaska

The most widespread of all Holocene tephra deposits in the Cook Inlet region of south-central Alaska is a set of deposits from Hayes volcano. Because of their unique phenocryst content-biotite in rare amounts and a high proportion of amphibole to pyroxene-the deposits are readily identifiable at all but the most distant sites where they are very fine grained. Eighteen radiocarbon dates from eight upland sites limit the age of the tephra set to between about 3500 and 3800 yr. The set originated at Hayes volcano in the Tordrillo Mountains 150 km northwest of Anchorage; seven or possibly eight closely succeeding deposits, low-silica dacite in composition, compose two main lobes that extend northeast for 400 km and south for at least 250 km from the vent. We estimate the total tephra volume to be 10 km3; multiple layers imply four to six larger and two or three smaller eruptions. The deposits are a nearly isochronous marker horizon that should be useful in future archeologic, geologic, and palynologic studies in the region. ?? 1990.

Quaternary Research↗

The Mount Edgecumbe tephra deposits, a marker horizon in southeastern Alaska near the Pleistocene-Holocene boundary

Late Pleistocene tephra deposits found from Sitka to Juneau and Lituya Bay are assigned to a source at the Mount Edgecumbe volcanic field, based on similarity of glass compositions to nearvent deposits and on thinning away from Kruzof Island. The sequence of near-vent layers is basaltic andesite and andesite at the base, rhyolite, and mixed dacite and rhyolite on top. The only breaks in the tephra sequence are two 1-mm-thick silt partings in a lake-sediment core, indicating a depositional interval from basaltic andesite to dacite of no more than about a millennium. Tephra deposits at sites >30 km from the vent are solely dacite and rhyolite and are 10,600 to 11,400 14C yr old based on interpretation of 18 radiocarbon ages, including 5 by accelerator mass spectrometry (AMS). Basaltic andesite and andesite deposits nearer the vent are as much as 12,000 yr old. Discrepancy among radiocarbon ages of upland tephra deposits provisionally correlated as the same grainfall is resolvable within ??2 ?? of analytical uncertainty. Comparison of bulk and AMS ages in one sediment core indicates a systematic bias of +600 to +1100 yr for the bulk ages; correlation of tephra deposits among upland and lacustrine sites implies an additional discrepancy of 200-400 yr between upland (relatively too young) and lacustrine ages. In any case, the Mount Edgecumbe tephra deposits are a widespread, latest Pleistocene stratigraphic marker that serves to emphasize the uncertainty in dating biogenic material from southeastern Alaska. ?? 1992.

Quaternary Research↗

Clay mineralogy, fine-grained sediment dispersal, and inferred current patterns, lower Cook Inlet and Kodiak shelf, Alaska

Because lower Cook Inlet and Kodiak shelf are being explored and developed for their petroleum resources, it is essential for environmental reasons to understand the sediment dispersal routes and current patterns. The Susitna River flows into upper Cook Inlet and is the source of clay minerals in Holocene deposits found in western lower Cook Inlet. The Copper River, in the northern Gulf of Alaska, provides clay minerals to the Kodiak shelf and southeastern lower Cook Inlet. In addition, crosion of local bedrock outcrops on the shelf produces some clays that are deposited on the Kodiak shelf. Current patterns can be inferred from the clay-mineral distribution pattern. This is true even if the clay-size fraction is a minor sediment component, and in areas where coarse-grained relict deposits occur. Some potential dangers from offshore petroleum development include: (1) rapid and complete mixing of Cook Inlet waters, (2) adsorption of pollutants by clay deposited in quiet bays, and (3) ion-exchange and adsorption of chemical pollutants on clays that are part of the suspended sediment load in lower Cook Inlet.

Alaska↗

Identification of bedforms in lower Cook Inlet, Alaska

The seafloor of the central part of lower Cook Inlet, Alaska, is characterized by the presence of different sizes and types of bedforms. The bedforms in the sandy sediments include straight-crested to sinuous to lunate ripples, small, medium, and large sand waves, sand ridges, sand ribbons, and sand patches. In addition, rocky and pebbly seafloor has been identified. The water depth ranges from 25 to 120 m, and surface currents average 3.8 kt (2 m/s). Bottom currents have been measured at as much as 42 cm/s at 1 m above bottom. Underwater television observations have shown that the rate of sand transport is lower than expected because small amounts of clay and organic matter appear to inhibit remobilization. Only during the last 1 to 2 h of ebb and flood stages of spring tides, and during storms, does significant transport occur. Comparison of data from high-resolution seismic profiling systems, side-scan sonar, bottom television and camera, and bottom sampling shows that bottom and bedform interpretations based solely on sonographs can be in error. Measuring the length of ‘acoustic shadows’ on sonographs to obtain bedform heights gives dimensions that are too large by factors of 3–7. Bottom television investigations revealed that the troughs between small sand waves are flat and carpeted by shell fragments. Such coarse material has a high acoustic reflectance that is not related to slope or height and can lead to false interpretations on bedform dimensions. Our observations have shown that small sand waves commonly superimposed on larger ones are slightly higher than those present on flat hard bottom but are still less than calculated from acoustic shadows. Where the bottom is rather smooth or contains elevations small enough to be masked by bathymetric ‘noise’ caused by the pitching of the vessel, sonographs typically show either small sand waves, sand ribbons, sand patches, rocks, or smooth bottom. The smooth-bottom category can vary widely from ripples to gravelly or shelly or to small rocks with biological overgrowth as verified by television observations. Our observations have clearly demonstrated the need for an integrated multi-scale observation and sampling program in order to classify the bottom characteristics and to provide quantitative data for transport calculations.

Alaska↗

Paleolimnology of Lake Tubutulik, an iron-meromictic Eocene Lake, eastern Seward Peninsula, Alaska

Sideritic lacustrine mudstone was found in drill core from a uranium deposit in the Death Valley area in the eastern part of the Seward Peninsula, Alaska. The precursor sediments for this rock were deposited in an unusual “iron-meromictic” Eocene lake, herein named Lake Tubutulik, which occupied part of the Boulder Creek basin, a structural graben that is probably a southern extension of the larger Death Valley basin. The Boulder Creek basin is bounded on the west by granite of the Late Cretaceous Darby Pluton, on the east by Precambrian to Paleozoic metasedimentary rocks. The lake basin was formed by basaltic flows that dammed the river valley of the ancestral Tubutulik River in early Eocene time. Lake Tubutulik contained a nearshore facies of fine-grained organic mud and an offshore facies of laminated sideritic mud. The offshore (profundal) laminated mudstone consists of alternating layers of authigenic siderite and detrital layers containing mostly quartz and clay minerals. Both lacustrine facies contain turbidities. The lacustrine sediments graded laterally into an onshore facies of colluvial and fluvial sandstone, paludal mudstone, and coal. The ancient lake apparently occupied a small deep basin in a tectonically active area of high relief. Meromixus was probably stabilized by reduced iron and bicarbonate dissolved in the monimolimnion. The intensity of meromixus decreased as the lake became shallower from sediment filling. The source of the iron, abundant in the monimolimnion of Lake Tubutulik, was probably the Eocene basalt. Based on carbon isotope analysis of the siderite, the dissolved bicarbonate in the profundal facies was largely inorganic. Sideritic carbon in one sample from the onshore paludal facies has an isotopic signature ( δ 13 C = +16.9) consistent with residual carbon formed during methanogenic fermentation.

Alaska↗

Seismic images of the Brooks Range fold and thrust belt, Arctic Alaska, from an integrated seismic reflection/refraction experiment

We describe results of an integrated seismic reflection/refraction experiment across the Brooks Range and flanking geologic provinces in Arctic Alaska. The seismic acquisition was unusual in that reflection and refraction data were collected simultaneously with a 700 channel seismograph system deployed numerous times along a 315 km profile. Shot records show continuous Moho reflections from 0–180 km offset, as well as numerous upper- and mid-crustal wide-angle events. Single and low-fold near-vertical incidence common midpoint (CMP) reflection images show complex upper- and middle-crustal structure across the range from the unmetamorphosed Endicott Mountains allochthon (EMA) in the north, to the metamorphic belts in the south. Lower-crustal and Moho reflections are visible across the entire reflection profile. Travel-time inversion of PmP arrivals shows that the Moho, at 33 km depth beneath the North Slope foothills, deepens abruptly beneath the EMA to a maximum of 46 km, and then shallows southward to 35 km at the southern edge of the range. Two zones of upper- and middle-crustal reflections underlie the northern Brooks Range above ~ 12–15 km depth. The upper zone, interpreted as the base of the EMA, lies at a maximum depth of 6 km and extends over 50 km from the range front to the north central Brooks Range where the base of the EMA outcrops above the metasedimentary rocks exposed in the Doonerak window. We interpret the base of the lower zone, at ~ 12 km depth, to be from carbonate rocks above the master detachment upon which the Brooks Range formed. The seismic data suggest that the master detachment is connected to the faults in the EMA by several ramps. In the highly metamorphosed terranes south of the Doonerak window, the CMP section shows numerous south-dipping events which we interpret as a crustal scale duplex involving the Doonerak window rocks. The basal detachment reflections can be traced approximately 100 km, and dip southward from about 10–12 km near the range front, to 14–18 km beneath the Doonerak window, to 26–28 km beneath the metamorphic belts in the central Brooks Range. The section documents middle- and lower-crustal involvement in the formation of the Brooks Range.

Alaska↗

Seismic evidence for an extensive gas-bearing layer at shallow depth, offshore from Prudhoe Bay, Alaska

High-resolution seismic reflection data, recorded offshore from Prudhoe Bay, Alaska, were processed digitally to determine the reflectivity structure of the uppermost layers of the seafloor. A prominent reflector, found at 27 m below the mud line (water depths 7-9 m), has a negative reflection coefficient greater than 0.5. The large acoustic impedance contrast, coupled with a report of gas encountered at a corresponding depth in a nearby drillhole, shows that the reflector is the upper boundary of a zone containing gas. The gas exists in sandy gravel capped by stiff, silty clay. Analysis of unprocessed conventional high-resolution records from the region indicates that the gas-bearing layer may extend over an area of at least 50 km2 at a depth of 20-35 m below the mud line. Similar-appearing reflectors (Reimnitz, 1972), previously unexplained, occur in patches over wide regions of the shelf where offshore oil development is beginning at a rapid pace. This suggests the exercise of caution with respect to possible hazards from shallow gas pockets.

Alaska↗

Changes in floral diversities, floral turnover rates, and climates in Campanian and Maastrichtian time, North Slope of Alaska

One-hundred-and-ten angiosperm pollen taxa have been found in upper Campanian to Masstrichtian rocks of the Colville River region, North Slope of Alaska. These are the highest paleolatitude Campanian and Maastrichtian floras known from North America. Total angiosperm pollen diversity rose during the Campanian and declined toward the end of the Maastrichtian. However, anemophilous porate pollen of the Betulaceae-Myricaceae-Ulmaceae complex increased gradually in diversity during the late Campanian and Maastrichtian and into the Paleocene. Turnover of angiosperm taxa was active throughout most of late Campanian and Maastrichtian time; rapid turnover affected mainly the taxa of zoophilous herbs, representing an bundant but ecologically subordinate element of the vegetation. Last appearances of pollen taxa during the late Campanian and Maastrichtian probably represented mainly extinctions rather than emigrations; end- Cretaceous angiosperm extinctions in the North American Arctic began well before the Cretaceous-Tertiary boundary event. The last appearances in the late Maastrichtian took place in bursts; they appear to represent stepwise rather than gradual events, which may indicate the existence of pulses of climatic change particularly in late Maastrichtian time. ?? 1989.

Alaska↗