Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Sedimentary Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87Linked to original sources
USGS2026

Lithium brine potential of North Dakota: Results from the 2025 sampling program

Lithium (Li), classified as a critical mineral and key in energy storage applications because of its high energy density, faces unprecedented demand. This has driven interest in unconventional sources of Li, especially brines from sedimentary basins. Accordingly, the spatial distribution of basinal brinehosted Li resources across North America is becoming better defined, including the Williston Basin underlying Saskatchewan, Canada. This has led to growing investment and exploration by industry throughout the 2020s; however, despite this interest, the Li potential of basinal brines of the Williston Basin in North Dakota remain underexplored. This work presents the results from the 2025 joint brine sampling campaign between the North Dakota Geological Survey, the United States Geological Survey (USGS), and The University of Texas at Austin. Twenty-seven fluid samples were collected from producing oil and water source wells from eight stratigraphic intervals across western North Dakota and analyzed for major cation and anion concentrations. Similar to southeastern Saskatchewan, the highest Li concentrations were identified in the Devonian Duperow Formation, with concentrations up to 179 mg/L being observed in a well commingled between the Duperow and Red River Formations. Some samples from the overlying Birdbear Formation exceeded 75 mg/L, whereas Li concentrations were lower in the Madison Group (33-44 mg/L) and the Three Forks (50 mg/L), Dawson Bay (43 mg/L), Winnipegosis (23 mg/L), and Red River (40.0 mg/L) Formations. This work indicates Li resource potential exists across the Williston Basin and advances our understanding of the Li distribution in basinal brines which could provide a new domestic source of this critical mineral.

North Dakota↗
USGS1986

The Conterminous United States Mineral Assessment Program; background information to accompany folio of geologic, geophysical, geochemical, mineral-occurrence, mineral-resource potential, and mineral-production maps of the Charlotte 1 degree x 2 degrees Quadrangle, North Carolina and South Carolina

This Circular and the folio of separately published maps described herein are part of a series of reports compiled under the Conterminous United States Mineral Assessment Program ICUSMAP). The folio on the Charlotte 1 degree ? 2 degree quadrangle, North Carolina and South Carolina, includes (1) a geologic map; (2) four geophysical maps; (3) geochemical maps for metamorphic heavy minerals, copper, lead and artifacts, zinc, gold, tin, beryllium, niobium, tungsten, molybdenum, titanium, cobalt, lithium, barium, antimony-arsenic-bismuth-cadmium, thorium-cerium-monazite, and limonite; (4) mineral-occurrence maps for kyanite-sillimanite-lithium-mica-feldspar-copper-lead-zinc, gold-quartz-barite-fluorite, iron-thorium-tin-niobium, and construction materials-gemstones; (5) mineral-resource potential maps for copper-lead-zinc-combined base metals, gold, tin-tungsten, beryllium-molybdenum-niobium, lithium-kyanite- sillimanitebarite, thorium (monazite)-uranium, and construction materials; and (6) mineral-production maps. The Charlotte quadrangle is mainly within the Piedmont physiographic province and extends from near the Coastal Plain on the southeast into the Blue Ridge province on the northwest for a short distance. Parts of six lithotectonic belts are present--the Blue Ridge, the Inner Piedmont, the Kings Mountain belt, the Charlotte belt, the Carolina slate belt, and the Wadesboro basin. Igneous, metamorphic, and sedimentary rocks are present and range in age from Proterozoic to Mesozoic; alluvial sediments of Quaternary age occur along rivers and larger streams. Rocks of the Blue Ridge include Middle Proterozoic granitoid gneiss intruded by Late Proterozoic granite; Late Proterozoic paragneiss, schist, and other metasedimentary and metavolcaniclastic rocks (Ashe and Grandfather Mountain Formations); Late Proterozoic and Early Cambrian metasedimentary rocks (Chilhowee Group); and Early Cambrian sedimentary rocks (Shady Dolomite). Paleozoic granites intrude the Proterozoic rocks. The Inner Piedmont contains noncarbonate metasedimentary rocks and amphibolite of medium to high metamorphic grades. These rocks are intruded by the Toluca Granite and Henderson Gneiss of Cambrian and Ordovician(?) age. The Charlotte belt consists largely of Late Proterozoic to Late Paleozoic granitic and gabbroic plutonic rocks and intervening enclaves of metasedimentary and metavolcanic rocks. The narrow Kings Mountain belt is located between the Charlotte and the Inner Piedmont belts and contains mainly Late Proterozoic metasedimentary rocks and plutonic rocks similar to those of the Charlotte belt. The Carolina slate belt, flanking the Charlotte belt on the east, contains weakly metamorphosed volcanic and sedimentary rocks. East of this belt, at the southeast corner of the quadrangle, is the Wadesboro basin, which has continental sedimentary rocks of Triassic age. Layered rocks westward from and in the Charlotte belt are complexly folded, are steeply dipping, and in the Blue Ridge and Inner Piedmont are contained within major thrust slices. Rocks of the Carolina slate belt are gently folded. Rocks of the Wadesboro basin occur in downfaulted blocks. The geophysical surveys of the Charlotte quadrangle consisted of Bouguer gravity, aeromagnetic, and aeroradioactivity surveys and used both newly obtained data and information from prior work. The gravity survey disclosed a distinct northeast-trending, northwest-decreasing gradient, which is part of the major gravity gradient that extends the length of the Appalachian Mountains. Granitic plutons of the Charlotte belt, in particular, are marked by gravity lows, and gabbro plutons, by highs. Several of the geologic belts display distinct magnetic character. The aeroradioactivity surveys showed a swath of consistently high gamma-ray intensities along the central part of the Inner Piedmont belt; these high intensities correspond to the so-called monazite belt. Oval patterns of high gamma-ray readi

Circular↗
USGS1997

Structure and kinematics of a complex impact crater, Upheaval Dome, southeast Utah

Two vastly different phenomena, impact and salt diapirism, have been proposed for the origin of Upheaval Dome, southeast Utah. Detailed geologic mapping, seismic refraction data, and the presence of shock metamorphosed rocks indicate that the dome originated by collapse of a transient cavity formed by impact. Evidence is: (1) the occurrence of a lag deposit of rare impactites, (2) fan-tailed fracture surfaces (shatter surfaces) and rare shatter cones are present near the center of the structure, (3) the top of the underlying salt horizon is at least 500 m below the surface at the center of the dome and there are no exposures of salt or associated rocks of the Paradox Formation in the dome to support the possibility that a salt diapir has ascended through it, (4) sedimentary strata in the center of the structure are pervasively imbricated by top-toward-the-center thrust faulting and are complexly folded as well, (5) top-toward-the-center normal faults are found at the perimeter of the structure, and 6) clastic dikes are widespread. We show that the dome formed mainly by centerward motion of rock units along listric faults. Outcrop-scale folding and upturning of beds, especially common in the center, are largely a consequence of this motion. We have also detected some centerward motion of fault-bounded wedges resulting from displacements on subhorizontal faults that conjoin and die out within horizontal bedding near the perimeter of the structure. The observed deformation corresponds to the central uplift and the encircling ring structural depression seen in complex impact craters.

Utah↗
USGS1977

Data from geologic investigations in the Yemen Arab Republic during 1976

The results of semiquantitative spectrographic analyses for 31 elements in 126 specimens of rocks from the Yemen Arab Republic, collected mainly during February 1976 from the Precambrian area in the southeastern part of the country, provide background data for use in geochemical evaluation of areas potentially favorable for mineral deposits. Gold and thorium were undetected; the lower limits of determination are 10 parts per million (ppm) and 20 ppm, respectively. For the other elements, the abundances follow geochemical norms for crustal distribution: (1) Fe, Nb, and Zr in Holocene weathering products; (2) Ca and Sr in Pliocene limestone; (3) Mo in Pliocene(?) or Miocene(?) dikes; (4) Be, La, and Sn in Miocene(?) alkalic granite; (5) As, Be, and La in Tertiary and/or Cretaceous felsic tuff; (6) V in Tertiary and/or Cretaceous carbonaceous sedimentary rocks interbedded with volcanic rocks; (7) Be, La, Sn, and Zr in Tertiary and/or Cretaceous undivided volcanics; (8) Sn and W in Precambrian felsite and pegmatite; (9) Co, Cr, Ni, and Ti in Precambrian mafic rocks; (10) Mg and Sr in Precambrian marble and calcsilicate rocks; (11) Y in Precambrilan schist; (12) B and Sc dispersed in rocks of many ages; and (13) Ag, Ba, Bi, Cd, Cu, Mn, Pb, Sb, Sn, and Zn in a hydrothermal replacement deposit in Precambrian sediment. None of the rocks contained as much as 205 ppm equivalent uranium. The highest values for Ag, Cu, Pb, Zn, and Cd were obtained on a sample of hydrothermally altered siltstone not personally collected by the writers. It was said to have come from the Ma'rib area in the eastern part of the Yemen Arab Republic. The source must be studied, because this single sample is high-grade base-metal ore. Among the samples collected by the writers, the economically most significant are altered tuffs, ignimbrites, and felsites exposed between Jibal Hufash and Manakhah on the road from Hudaydah to San'a'. They are strongly anomalous for As and weakly anomalous, variously, for Hg, Mo, and Pb, which elements may constitute an epigenetic dispersion pattern from hidden sulfide deposits. Inasmuch as chalcopyrite and native copper have been reported in the vicinity of Jabal Haraz in the Manakhah area, the rocks of the Yemen Volcanics in this region should be explored for base-metal sulfide deposits. The first results of paleontologic examinations of fossils collected during 1975 and 1976 are presented, as are a list of Landsat images covering the Yemen Arab Republic, and a selected bibliography of reports on geology and the allied sciences relating to the Yemen Arab Republic.

Open-File Report↗
USGS1987

The case for tectonic denudation by the Heart Mountain fault - A response

T wo basic concepts pertaining to the history of the Heart Mountain fault of northwestern Wyoming have recently been challenged; one, that there was tectonic denudation, and two, that volcanic rock of the Wapiti Formation was deposited on the exposed fault surface. Tectonic denudation is believed to have occurred as a consequence of the upper plate having broken into numerous blocks that separated as movement progressed along a nearly horizontal fault surface, thus leaving the fault surface exposed between blocks. Volcanic rocks of the Wapiti Formation were then deposited both on the exposed fault surface and against and over the upper-plate blocks. Two formations of Eocene volcanic rocks are involved. The older volcanic unit, the Cathedral Cliffs Formation, and the Paleozoic carbonate rocks are part of the upper plate of the Heart Mountain fault and moved with it, whereas the younger Wapiti Formation was deposited on the fault surface after movement had ceased. In an alternate interpretation recently advanced by T. A. Hauge, subdivisions of the Absaroka Volcanic Supergroup, of which the Cathedral Cliffs and Wapiti Formations are units, are not recognized. The upper plate of the Heart Mountain detachment is interpreted as having been a single, continuous allochthon composed largely of volcanic rocks with small amounts of Paleozoic rocks. During Heart Mountain faulting, extension of the once-continuous slab of Paleozoic sedimentary rock is alleged to have been accompanied by the formation of ten or more grabens, now filled predominantly by Absaroka volcanic rocks. This interpretation further proposes that the volcanic rocks were emplaced while the separating blocks of Paleozoic strata were still moving and that the basal part of the volcanic rock between these blocks is in fault contact rather than depositional contact with the strata beneath the Heart Mountain fault. Many lines of geologic field evidence indicate that the Wapiti Formation is younger than the Heart Mountain fault and was deposited on the technically denuded fault surface. (1) Wapiti rocks bury the break-away fault. (2) Fault breccia at the base of the upper-plate carbonate blocks is composed entirely of carbonate fault breccia and has no volcanic component. (3) Small blocks of upper-plate rocks have been displaced by gravity from the upper part of the allochthon to the detachment fault surface. (4) Eocene stream-channel deposits locally cut into the surface of tectonic denudation and also have been displaced on the Heart Mountain fault. (5) The volume of Wapiti Formation filling the spaces between allochthonous blocks in proportion to the volume of those blocks is much too great for the Wapiti to have been allochthonous. (6) Clastic dikes of carbonate fault breccia penetrate Wapiti volcanic rocks. (7) Some of these clastic dikes of fault breccia contain Precambrian xenoliths and wood phenoclasts requiring surface exposures of the fault breccia before injection as dikes. (8) Wapiti volcanic rocks having chilled borders are in tightly bonded contact with upper-plate Paleozoic rocks. (9) Faults present in the upper-plate blocks do not penetrate the overlying Wapiti Formation. (10) Volcanic fault breccia is absent where volcanic rocks overlie carbonate fault breccia. (11) A mound of carbonate fault breccia is not mixed with overlying Wapiti Formation. The continuous allochthon interpretation is based on several erroneous assumptions that cannot be supported by field observations. (1) Faults to transport and emplace the Wapiti Formation onto and along the Heart Mountain fault do not exist. (2) The contact between volcanic rocks and the allochthon west of Corral Creek at the west end of Cathedral Cliffs, cited by Hauge as a fault in an extending allochthon, is a depositional contact. (3) The volcanic rock adjoining allochthonous Paleozoic rocks north of Pilot Creek cannot be part of an extending allochthon because (a) it is Cathedral Cliffs Formation, which is pre–Heart Mountain fault, and (b) its direction of movement is horizontal rather than down dip, as required in an extending allochthon. (4) Most of the igneous dikes were intruded after the Heart Mountain fault movement ceased, and so they could not accommodate significant extension of the upper plate. (5) Striae reported as indicating fault emplacement of volcanic rock (Wapiti Formation) on the Heart Mountain fault actually lire flow features, formed as the Wapiti Formation was deposited on the exposed fault surface. Tectonic denudation is the only model that is consistent with evidence observable in the field. Although the process by which tectonic denudation was accomplished remains enigmatic, tectonic denudation remains a constraining fact in any model for the origin of the Heart Mountain fault.

Wyoming↗
USGS2012

Occurrence model for volcanogenic beryllium deposits

Current global and domestic mineral resources of beryllium (Be) for industrial uses are dominated by ores produced from deposits of the volcanogenic Be type. Beryllium deposits of this type can form where hydrothermal fluids interact with fluorine and lithophile-element (uranium, thorium, rubidium, lithium, beryllium, cesium, tantalum, rare earth elements, and tin) enriched volcanic rocks that contain a highly reactive lithic component, such as carbonate clasts. Volcanic and hypabyssal high-silica biotite-bearing topaz rhyolite constitutes the most well-recognized igneous suite associated with such Be deposits. The exemplar setting is an extensional tectonic environment, such as that characterized by the Basin and Range Province, where younger topaz-bearing igneous rock sequences overlie older dolomite, quartzite, shale, and limestone sequences. Mined deposits and related mineralized rocks at Spor Mountain, Utah, make up a unique economic deposit of volcanogenic Be having extensive production and proven and probable reserves. Proven reserves in Utah, as reported by the U.S. Geological Survey National Mineral Information Center, total about 15,900 tons of Be that are present in the mineral bertrandite (Be 4 Si 2 O 7 (OH) 2 ). At the type locality for volcanogenic Be, Spor Mountain, the tuffaceous breccias and stratified tuffs that host the Be ore formed as a result of explosive volcanism that brought carbonate and other lithic fragments to the surface through vent structures that cut the underlying dolomitic Paleozoic sedimentary rock sequences. The tuffaceous sediments and lithic clasts are thought to make up phreatomagmatic base surge deposits. Hydrothermal fluids leached Be from volcanic glass in the tuff and redeposited the Be as bertrandite upon reaction of the hydrothermal fluid with carbonate clasts in lithic-rich sections of tuff. The localization of the deposits in tuff above fluorite-mineralized faults in carbonate rocks, together with isotopic evidence for the involvement of magmatic water in an otherwise meteoric water-dominated hydrothermal system, indicate that magmatic volatiles contributed to mineralization. At the type locality, hydrothermal alteration of dolomite clasts formed layered nodules of calcite, opal, fluorite, and bertrandite, the latter occurring finely intergrown with fluorite. Alteration assemblages and elemental enrichments in the tuff and surrounding volcanic rocks include regional diagenetic clays and potassium feldspar and distinctive hydrothermal halos of anomalous fluorine, lithium, molybdenum, niobium, tin, and tantalum, and intense potassium feldspathization with sericite and lithium-smectite in the immediate vicinity of Be ore. Formation of volcanogenic Be deposits is due to the coincidence of multiple factors that include an appropriate Be-bearing source rock, a subjacent pluton that supplied volatiles and heat to drive convection of meteoric groundwater, a depositional site characterized by the intersection of normal faults with permeable tuff below a less permeable cap rock, a fluorine-rich ore fluid that facilitated Be transport (for example, BeF 4 2- complex), and the existence of a chemical trap that caused fluorite and bertrandite to precipitate at the former site of carbonate lithic clasts in the tuff.

Scientific Investigations Report↗
USGS1984

Review of buried crystalline rocks of eastern United States in selected hydrogeologic environments potentially suitable for isolating high-level radioactive wastes

Among the concepts suggested for the deep disposal of high-level radioactive wastes from nuclear power reactors is the excavation of a repository in suitable crystalline rocks overlain by a thick sequence of sedimentary strata in a hydrogeologic environment that would effectively impede waste transport. To determine the occurrence of such environments in the Eastern United States, a review was made of available sources of published or unpublished information, using the following hydrogeologic criteria: The top of the crystalline basement rock is 1,000 to 4,000 feet below land surface. The crystalline rock is overlain by sedimentary rock whose lowermost part, at least, contains ground water with a dissolved-solids concentration of 10,000 milligrams per liter or more. Shale or clay confining beds overlie the saline-water aquifer. The flow system in the saline-water aquifer is known or determinable from presently available data. All of these hydrogeologic conditions occur in two general areas: (1) parts of Indiana, Ohio, and Kentucky, underlain by part of the geologic structure known as the Cincinnati arch, and (2) parts of the Atlantic Coastal Plain from Georgia to New Jersey.

Water-Resources Investigations Report↗
USGS1957

Ground-water geology of the Bruneau–Grand View area, Owyhee County, Idaho

The Bruneau-Grand View area is part of an artesian basin in northern Owyhee County, Idaho. The area described in this report comprises about 600 square miles, largely of undeveloped public domain, much of which is open, or may be opened, for desert-entry filing. Many irrigation-entry applications to the Federal Government are pending, and information about ground-water geology is needed by local citizens and well drillers, by Federal agencies that have custody of the land, and by local and State agencies that administer water rights. The areal geology and ground-water conditions in the Bruneau-Grand View area seemingly typify several basins in southwestern Idaho, and this study is a step toward definition and analysis of regional problems in ground-water geology and the occurrence and availability of ground water for irrigation or other large-scale uses. Owyhee County is subdivided physiographically into a plateau area, the Owyhee uplift, and the Snake River valley. The Bruneau-Grand View area is largely within the Snake River valley. The climate is arid and irrigation is essential for stable agricultural development. Nearly all usable indigenous surface water in the area is appropriated, including freshet flow in the Bruneau River, which is used for power generation at the C. J. Strike Dam. However, with storage facilities additional land could be irrigated, and some land may be irrigated with Snake River water if suitable reclamation projects are constructed. Sedimentary and igneous rocks exposed in the area range in age from Miocene to Recent. The igneous rocks include silicic and basic intrusive and extrusive bodies, and the sedimentary rocks are compacted stream and lake sediments. The rocks contain economically important artesian aquifers; the principal ones are volcanic rocks in which ground water is imperfectly confined beneath sediments of the Idaho formation, thus forming a leaky artesian system. The altitude of the piezometric surface of the artesian water does not exceed about 2,700 feet above mean sea level. In some areas, where the land surface is below that altitude, the artesian system discharges water through springs and seeps and locally causes waterlogging and development of alkali soil. In chemical quality much of the water is unsuitable for irrigation and domestic use. The water contains a relatively moderate amount of dissolved solids, but the percent sodium and the concentration of fluoride are excessive for some uses. The quality of the water for irrigation ranges from excellent in the southern part of the artesian system to unsuitable in the northern part. All the artesian ground water that was sampled contained excessive amounts of fluoride. There is a substantial supply of undeveloped artesian water in the area, but sustained use of the water for irrigation may not be feasible unless provisions can be made for adequate soil drainage and soil amendment, because of the high percentage of sodium in the water. Detailed hydrologic and geologic study of the area should precede development.

Idaho↗
USGS2002

Geologic and geophysical evidence for the influence of deep crustal structures on Paleozoic tectonics and the alignment of world-class gold deposits, north-central Nevada, USA

Geologic data concur with geophysical and isotopic data that suggest the presence of deep crustal fault zones along the Battle Mountain-Eureka (BME) trend and elsewhere in Nevada. The fault zones may have originated during Proterozoic rifting of the continent and were likely substantially reactivated and modified during Paleozoic tectonism. Five distinct Paleozoic structural and stratigraphic domains are defined that demonstrate the complexity of Paleozoic tectonic events and also lead to hypotheses about ways in which the margin could have been modified. The current locations of these domains adjacent to the geophysically and isotopically defined indicators of the buried continent edge corroborate their interactions with the continental margin. During the Tertiary, preexisting crustal fault zones were intersected and reopened during episodes of extension and served as the conduits for deep-sourced, gold-rich fluids, which were disseminated into Paleozoic slope facies sedimentary rocks, forming sediment-hosted Carlin-type and other deposits. Multiple factors including the locations of these deep-seated structures, the original configuration of the lower Paleozoic continental margin of Nevada, and its subsequent reactivation during the Paleozoic all were fundamental controls on the location of younger mineral deposits. A clearer understanding of the original configuration of the margin and of the effects of subsequent Paleozoic and Mesozoic tectonic events on the margin would provide insight into the locations of these and other prospective mineral belts. ?? 2002 Elsevier Science B.V. All rights reserved.

Ore Geology Reviews↗
USGS2005

Geology and stratigraphy of the Challis Volcanic Group and related rocks, Little Wood River area, south-central Idaho

The southwestern part of the Challis volcanic field occupies the valley of the Little Wood River and its tributaries in the Hailey and Idaho Falls 1°×2° quadrangles of south-central Idaho. The Little Wood River area is a structurally controlled topographic basin that is partly filled by Eocene Challis Volcanic Group and younger rocks. Rock types in the Challis Volcanic Group of the Little Wood River area include, in order of decreasing abundance, andesite lava flows and tuff breccia, dacite lava flows and flow breccia, volcaniclastic sedimentary rocks, lithic tuff, nonvolcanic conglomerate, and rhyolite dikes. A basal nonvolcanic conglomerate, that locally rests on upper Paleozoic sedimentary rocks at a regional unconformity, was deposited prior to eruption of volcanic rocks. Andesite was the first volcanic rock erupted and is a voluminous sequence as thick as 3,000 ft (1,000 m). Locally thick volcaniclastic sedimentary rocks accumulated in topographic lows. A sharp transition marks the beginning of dacite eruption from fissures and flow-dome complexes. Dacite flows and breccias are as thick as 2,000 ft (600 m). An upper volcaniclastic unit was deposited in paleotopographic lows following emplacement of the main dacite unit. Next, a widespread, distinctive, lithic rich ash flow tuff, correlated with the tuff of Stoddard Gulch, was deposited over much of the area. Deposition of the tuff was followed by eruption of thin andesite and dacite lava flows and deposition of conglomeratic sedimentary rocks. The entire sequence was then intruded by a dacite flow-dome complex composed of at least three separate intrusions. The Challis Volcanic Group in the study area is calcalkaline. Andesitic rocks are typically high potassium basaltic andesite, high potassium andesite, shoshonite, and banakite (latite). Dacitic rocks are high potassium dacite and trachyte. Tuffs and vitrophyres range in composition from basaltic andesite to trachyte. The paleotopographic basin in which the Challis Volcanic Group accumulated was in part structurally controlled by preexisting west and northwest trending normal faults. Paleorelief was probably more than 2,000 ft (600 m). Rocks of the Challis Volcanic Group typically dip about 36° E., probably owing to Eocene extension and (or) basin-and-range faulting and tilting. Some potential for precious- and base- metal hydrothermal deposits is associated with northeast trending lineaments, argillic alteration, and rhyolite dikes.

Idaho↗
USGS2000

Geologic map of the Ennis 30' x 60' quadrangle, Madison and Gallatin Counties, Montana, and Park County, Wyoming

The Ennis 1:100,000 quadrangle lies within both the Laramide (Late Cretaceous to early Tertiary) foreland province of southwestern Montana and the northeastern margin of the middle to late Tertiary Basin and Range province. The oldest rocks in the quadrangle are Archean high-grade gneiss, and granitic to ultramafic intrusive rocks that are as old as about 3.0 Ga. The gneiss includes a supracrustal assemblage of quartz-feldspar gneiss, amphibolite, quartzite, and biotite schist and gneiss. The basement rocks are overlain by a platform sequence of sedimentary rocks as old as Cambrian Flathead Quartzite and as young as Upper Cretaceous Livingston Group sandstones, shales, and volcanic rocks. The Archean crystalline rocks crop out in the cores of large basement uplifts, most notably the 'Madison-Gravelly arch' that includes parts of the present Tobacco Root Mountains and the Gravelly, Madison, and Gallatin Ranges. These basement uplifts or blocks were thrust westward during the Laramide orogeny over rocks as young as Upper Cretaceous. The thrusts are now exposed in the quadrangle along the western flanks of the Gravelly and Madison Ranges (the Greenhorn thrust and the Hilgard fault system, respectively). Simultaneous with the west-directed thrusting, northwest-striking, northeast-side-up reverse faults formed a parallel set across southwestern Montana; the largest of these is the Spanish Peaks fault, which cuts prominently across the Ennis quadrangle. Beginning in late Eocene time, extensive volcanism of the Absorka Volcanic Supergroup covered large parts of the area; large remnants of the volcanic field remain in the eastern part of the quadrangle. The volcanism was concurrent with, and followed by, middle Tertiary extension. During this time, the axial zone of the 'Madison-Gravelly arch,' a large Laramide uplift, collapsed, forming the Madison Valley, structurally a complex down-to-the-east half graben. Basin deposits as thick as 4,500 m filled the graben. Pleistocene glaciers sculpted the high peaks of the mountain ranges and formed the present rugged topography.

IMAP↗
USGS1963

Geology and ground-water resources of Montgomery County, Alabama

Montgomery County includes an area of 790 square miles in east-central Alabama. The economy of Montgomery County is related primarily to the growing and processing of agricultural products. The county is in the northern part of the Coastal Plain. It consists of parts of four divisions of the Coastal Plain: the terraces, the Black Prairie, the Chunnennuggee Hills, and the flood plains. The county drains north and northwest into the Alabama and Tallapoosa Rivers, except for a small area in the southern part of the county that is drained by tributaries of the Conecuh River. Sedimentary rocks of Late Cretaceous age underlie Montgomery County. They are divided, in ascending order, into the following: Coker and Gordo formations of the Tuscaloosa group; Eutaw formation; and Mooreville and Demopolis chalks, Ripley formation, Prairie Bluff chalk, and Providence sand of the Selma group. The Clayton formation of Tertiary age crops out in a small area in the southern part of the county. Pleistocene terrace deposits of the ancestral Alabama River overlie the older rocks in the northern part of the county. Recent alluvium underlies the flood plains of the larger streams. The Cretaceous and younger rocks consist chiefly of clay, chalk, sandstone, sand, and gravel, and a few thin beds of limestone. These deposits are underlain by a basement complex of pre-Cretaceous crystalline rocks. Large-scale withdrawals of water began in the Montgomery area about 1885. Pumpage by the city of Montgomery in 1958 averaged about 15 million gallons per day. It is estimated that an additional 10 to 15 million gallons per day was pumped in the county for industrial, irrigation, domestic, and stock use. The principal aquifer in the country is the Eutaw formation. It supplies water to the city of Montgomery municipal wells, to industrial wells in the Montgomery area, and to most domestic and stock wells in the northern two-thirds of the county. Irrigation wells also tap the Eutaw. Yields from wells range from 350 to 600 gallons per minute. The Gordo formation, the upper part of the Coker formation, and the Pleistocene terrace deposits in the Montgomery area also yield moderate to large quantities of water to municipal and industrial wells. The lower part of the Coker formation is not developed as a source of water supply, but information obtained during the investigation rthat led to this report indicates that it may be a potential source of water to wells of large capacity. Sand beds in the Ripley formation, Providence sand, and Recent alluvium in -the southern part of the county yield adequate amounts of water to domestic and stock wells. Most of the ground water used in Montgomery County occurs under artesian conditions, although water-table conditions occur in the Pleistocene terrace deposits and Recent alluvium, and in the outcrop areas of the Eutaw and Eipley formations and the Providence sand. Most of the water recharging the Ooker, Gordo, and Eutaw formations in their areas of outcrop also is discharged in these areas; only a small quantity of water moves downdip beneath the overlying chalk beds. The natural discharge, and hence the natural recharge, is estimated to be 0.2 to 0.3 million gallons per day per square mile of outcrop. All ground water in the county is of chemical quality that is satisfactory for most uses, although locally it is high in iron or chloride content and is hard. Water from the Eutaw formation a few miles southwest of Montgomery's West well field is very high in chloride content. This water moves toward the cone of depression in the piezometric surface produced by pumping in the West well field. Much additional ground water could be pumped from the Eutaw formation, especially south of Montgomery's West well field. Additional water also is available from the upper part of the Coker formation. Before large groundwater developments are planned, however, the problems of well spacing and pumping rates should be studied in order to determine the maximum development permitted by the supply. Observation wells should be installed in the Eutaw formation southwest of Montgomery's West well field to detect encroachment of water of high chloride content from adjacent Lowndes County.

Alabama↗
USGS2011

Downhole well log and core montages from the Mount Elbert Gas Hydrate Stratigraphic Test Well, Alaska North Slope

The BPXA-DOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test Well was an integral part of an ongoing project to determine the future energy resource potential of gas hydrates on the Alaska North Slope. As part of this effort, the Mount Elbert well included an advanced downhole geophysical logging program. Because gas hydrate is unstable at ground surface pressure and temperature conditions, a major emphasis was placed on the downhole-logging program to determine the occurrence of gas hydrates and the in-situ physical properties of the sediments. In support of this effort, well-log and core data montages have been compiled which include downhole log and core-data obtained from the gas-hydrate-bearing sedimentary section in the Mount Elbert well. Also shown are numerous reservoir parameters, including gas-hydrate saturation and sediment porosity log traces calculated from available downhole well log and core data.

Alaska↗
USGS2007

Sedimentary rock-hosted Au deposits of the Dian-Qian-Gui area, Guizhou, and Yunnan Provinces, and Guangxi District, China

Sedimentary rock-hosted Au deposits in the Dian-Qian-Gui area in southwest China are hosted in Paleozoic and early Mesozoic sedimentary rocks along the southwest margin of the Yangtze (South China) Precambrian craton. Most deposits have characteristics similar to Carlin-type Au deposits and are spatially associated, on a regional scale, with deposits of coal, Sb, barite, As, Tl, and Hg. Sedimentary rock-hosted Au deposits are disseminated stratabound and(or) structurally controlled. The deposits have many similar characteristics, particularly mineralogy, geochemistry, host rock, and structural control. Most deposits are associated with structural domes, stratabound breccia bodies, unconformity surfaces or intense brittle-ductile deformation zones, such as the Youjiang fault system. Typical characteristics include impure carbonate rock or calcareous and carbonaceous host rock that contains disseminated pyrite, marcasite, and arsenopyrite-usually with ??m-sized Au, commonly in As-rich rims of pyrite and in disseminations. Late realgar, orpiment, stibnite, and Hg minerals are spatially associated with earlier forming sulfide minerals. Minor base-metal sulfides, such as galena, sphalerite, chalcopyrite, and Pb-Sb-As-sulphosalts also are present. The rocks locally are silicified and altered to sericite-clay (illite). Rocks and(or) stream-sediment geochemical signatures typically include elevated concentrations of As, Sb, Hg, Tl, and Ba. A general lack of igneous rocks in the Dian-Qian-Gui area implies non-pluton-related, ore forming processes. Some deposits contain evidence that sources of the metal may have originated in carbonaceous parts of the sedimentary pile or other sedimentary or volcanic horizons. This genetic process may be associated with formation and mobilization of petroleum and Hg in the region and may also be related to As-, Au-, and Tl-bearing coal horizons. Many deposits also contain textures and features indicative of strong structural control by tectonic domes or shear zones and also suggest syndeformational ore deposition, possibly related to the Youjiang fault system. Several sedimentary rock-hosted Au deposits in the Dian-Qian-Gui area also are of the red earth-type and Au grades have been concentrated and enhanced during episodes of deep weathering. ?? 2006 Elsevier B.V. All rights reserved.

Ore Geology Reviews↗
USGS1985

Carbonate concretions: an ideal sedimentary host for microfossils

Microfossils extracted from carbonate concretions tend to be better preserved, more abundant and diverse, and more likely to retain delicate and fragile structures than those extracted from the surrounding rocks. Enhanced preservation correlates with early diagenetic concretion formation at or near the sediment-water interface and with higher carbonate, organic material, and metallic cation content than in surrounding rocks. Early diagenetic growth is inferred by diverging sedimentary laminations and small-scale sedimentary structures in fossiliferous carbonate concretions. High initial concentrations of microorganisms or fecal pellets may commonly be responsible for incipient carbonate-concretion growth. Excellent preservation is demonstrated by radiolarians and palynomorphs extracted from a carbonate concretion from the Middle Jurassic Shelikof Formation, southern Alaska.

Geology↗
USGS1988

Stable isotope geochemistry of sphalerite and other mineral matter in coal beds of the Illinois and Forest City basins

Cleat and clastic dikes of Middle Pennsylvanian-age coal beds of the Illinois and Forest City basins of Illinois, Iowa, Missouri, and Kansas locally contain appreciable amounts of sphalerite within a kaolinite-pyrite-sphalerite (+ or - pyrite)-calcite paragenetic sequence. The sphalerite and associated minerals are of interest as a partial record of the history of fluids in the sedimentary basin and as possible indicators of Mississippi Valley-type mineralization. Moreover, zinc from the sphalerite may represent an exploitable by-product of coal mining and combustion.Pyrite is abundant in these coals both as fine-grained disseminated framboids that formed during early diagenesis and as coarser grained cleat fillings, etc., that formed much later. The delta 34 S values of this later pyrite, the sphalerite, and the coal organic matter range from -12 to 19 per mil. Within individual samples, however, pyrite, sphalerite, and organic matter sulfur delta 34 S values are nearly identical. This similarity strongly suggests related origins. The delta 34 S values of pyrite, sphalerite, and organic matter from coals of the Illinois basin and the central and southern Forest City basin range from -12 to 0 per mil. This range is not unique to the sphalerite-bearing coals; pyrite and organic matter from sphalerite-free high sulfur coals have similar delta 34 S values (Price and Shieh, 1979). We believe that sulfur produced by the breakdown of organosulfur compounds in the coal is incorporated into the epigenetic sulfides. In the northern Forest City basin, however, many samples have delta 34 S values between 8 and 19 per mil. These are similar to the delta 34 S values of sphalerite and pyrite from the Upper Mississippi Valley Zn-Pb district which lies northeast of the Forest City basin and north of the Illinois basin. This similarity suggests input from a Mississippi Valley-type hydrothermal system.Cleat kaolinite has delta D values of -36 to -24 per mil and delta 18 O values of 19.2 to 20.2 per mil. Assuming that clearing postdated the lignite rank of coalification implies that kaolinite was deposited between 40 degrees and 100 degrees C. At the lower temperatures, the kaolinite fluid would have had an isotopic composition similar to seawater; at the higher temperatures, it would have had a composition similar to the sphalerite-depositing fluid. Sphalerite was deposited from a fluid that was chemically and isotopically similar to the fluids responsible for the main-stage ores of the Upper Mississippi Valley Zn-Pb district (75 degrees -113 degrees C, approximately 21 equiv wt % NaCl, delta D = -65 to -3ppm, and delta 18 O = -0.9-9.9ppm). The isotopic compositions (delta 13 C = -12.4 to -2.7ppm and delta 18 O = 21.1-25.8ppm) and paragenetic positions of the cleat calcite samples are similar to those of the late-stage calcite of the Upper Mississippi Valley Zn-Pb and Illinois-Kentucky fluorspar districts. Calcite inclusion fluids had delta D (sub H 2 O) values of -80 and -58 per mil, implying a meteoric water source. At probable temperatures of 15 degrees to 75 degrees C, this calcite formed from fluids having calculated delta 18 O (sub H 2 O) values of -9 to 1 per mil, implying slight to moderate exchange with sedimentary rocks. The diagenetic-epigenetic history of fluids recorded by the cleat minerals probably began with a slightly evolved seawater, followed by a metal-bearing deep basin brine, and concluded with a cooler, slightly evolved, meteoric-water fluid.

Economic Geology↗
USGS2007

A pan-Precambrian link between deglaciation and environmental oxidation

Despite a continuous increase in solar luminosity to the present, Earth’s glacial record appears to become more frequent, though less severe, over geological time. At least two of the three major Precambrian glacial intervals were exceptionally intense, with solid evidence for widespread sea ice on or near the equator, well within a “Snowball Earth” zone produced by ice-albedo runaway in energy-balance models. The end of the first unambiguously low-latitude glaciation, the early Paleoproterozoic Makganyene event, is associated intimately with the first solid evidence for global oxygenation, including the world’s largest sedimentary manganese deposit. Subsequent low-latitude deglaciations during the Cryogenian interval of the Neoproterozoic Era are also associated with progressive oxidation, and these young Precambrian ice ages coincide with the time when basal animal phyla were diversifying. However, specifically testing hypotheses of cause and effect between Earth’s Neoproterozoic biosphere and glaciation is complicated because large and rapid True Polar Wander events appear to punctuate Neoproterozoic time and may have episodically dominated earlier and later intervals as well, rendering geographic reconstruction and age correlation challenging except for an exceptionally well-defined global paleomagnetic database.

Open-File Report↗
USGS2008

Miocene Total Petroleum System -- Southeast Stable Shelf Assessment Unit of the San Joaquin Basin Province: Chapter 13 in Petroleum systems and geologic assessment of oil and gas in the San Joaquin Basin Province, California

The confirmed stratigraphic and structural-stratigraphic Southeast Stable Shelf Assessment Unit (AU) of the Miocene Total Petroleum System (San Joaquin Basin Province) comprises all hydrocarbon accumulations within the geographic limits of the AU. Traps typically display low dip angles, gentle folds, and normal faults. Reservoirs, which range in age from fractured Mesozoic basement rocks to Holocene nonmarine rocks, are mainly Oligocene to Miocene sandstones from the uppermost slope and adjacent shelf of the San Joaquin Basin, shallow marine shelf sandstones mainly of Miocene age, and nonmarine sandstones and conglomerates mostly of Pliocene- Pleistocene age. Faults have relatively small vertical displacements. Map boundaries of the assessment unit are shown in figures 13.1 and 13.2; this assessment unit replaces the Southeast Stable Shelf play 1002 considered by the U.S. Geological Survey (USGS) in its 1995 National Assessment (Beyer, 1996). Stratigraphically, the AU extends from the uppermost crystalline basement to the topographic surface (fig. 13.3). The AU is bounded on the west by the approximate location of the shelfslope break of the San Joaquin Basin in late Miocene time, thus excluding reservoirs in the deep-water Stevens sand of Eckis (1940). The eastern boundary of the AU is the edge of onlap of Neogene sedimentary sequences on crystalline basement rocks of the Sierra Nevada. The northern AU boundary is placed at the approximate northern extent of oils in shelf-facies reservoirs known to be sourced by the Miocene Total Petroleum System. This northern boundary explicitly excludes the Deer Creek and Jasmin fields, which were included in the corresponding earlier (1995) USGS play (Beyer, 1996), but which are now known to contain oil generated from Eocene source rocks. The White Wolf Fault bounds the AU on the south.

California↗