Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal of North American Bat Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,662 records · Page 87Linked to original sources
USGS2025

Road salt collection and redistribution at an urban rain garden on sandy soil, Gary, Indiana

Rain gardens installed as green infrastructure to divert storm runoff from entering combined sewers also collect dissolved constituents and particulates. An urban rain garden in northwestern Indiana, USA, was continuously monitored from November 2019 to May 2021 to evaluate the fate of dissolved constituents entering the rain garden in runoff. Physical and chemical properties of soils in the rain garden were also monitored, along with underlying groundwater. Linear regression models relating specific conductance to chloride concentration indicated that the 0.0371-ha (3998 square feet) rain garden collected approximately 1490 kg (3285 pounds) of road salt from the surrounding 0.2228 ha (24,500 square feet) of impervious surfaces. Soils and groundwater were seasonally affected by road salt application but carryover from year to year was not indicated. Rain garden soil permeability (5.20 × 10 −5 to 9.72 × 10 −5 m/s) remained unchanged during the study period and soil organic carbon generally increased under native vegetation. The results suggest that a rain garden built on sandy soil can divert substantial quantities of runoff and dissolved constituents from combined sewers; however, chloride is transported to sub-infrastructure groundwater that eventually discharges to adjacent waterways with concentrations lower than those observed in runoff.

Indiana↗
USGS2025

Fossil diatoms in Arctic marine surface sediments

Diatoms are one of the main constituents of marine phytoplankton in the Arctic, and thanks to their siliceous skeletons, diatom fossils are relatively well preserved in sediments. Due to their species-specific sensitivity to different ocean conditions, their abundance and assemblages in sediments are routinely used by paleoceanographers to reconstruct the state of the surface ocean in the past (Koç 2007). By using statistical methods, we can obtain valuable knowledge about their ecological preferences (Oksman et al. 2019) and generate quantitative reconstructions of various parameters, such as sea-surface temperature and sea-ice concentration through time (Krawczyk et al. 2021; Sha et al. 2014). The Marine Arctic Diatoms (MARDI) working group (WG) ( pastglobalchanges.org/mardi ) aims to advance knowledge on marine-diatom ecology and diatom-based reconstructions by compiling and harmonizing data from surface-sediment samples across the Arctic.

Pages Magazine↗
USGS2025

Groundwater response to managed aquifer recharge at the Southeast Houghton Artificial Recharge Project in Tucson, Arizona

Managed aquifer recharge is a widespread practice for storing water in the subsurface as groundwater. At a managed aquifer recharge facility in southern Arizona, groundwater-level and repeat microgravity data were collected to monitor aquifer response. These data were used to inform parameter identification for an unsaturated-zone flow model used to simulate the recharge process. The facility, the Southeast Houghton Artificial Recharge Project (SHARP), consists of 3 surface basins (about 27,600 square meters [6.8 acres] total surface area) where recycled water is distributed in recharge cycles lasting several months, with dry periods in between. During the study period, December 2020–December 2022, Tucson Water (the City of Tucson’s water utility) reported 6.56×10 6 cubic meters of water (5,320 acre-feet) recharged. Monitoring included groundwater-level observations at 3 monitoring wells and repeat microgravity measurements at as many as 22 locations (some stations were destroyed between surveys). Six gravity surveys were carried out using absolute- and relative-gravity meters. Large gravity increases, more than 250 microgals, were observed during the first repeat survey, 3.5 months after the start of recharge, but only in the immediate vicinity of the recharge basins. Data show that water moved downward to the water table, and storage changes in the unsaturated zone away from the facility were likely minimal. Gravity decreased at stations more than 1 kilometer from the facility, consistent with regional groundwater-level changes. Groundwater-level increases in wells adjacent to the recharge basins began 2 months after the second repeat gravity survey, and 5.5 months after recharge began. Unsaturated-zone flow modeling was carried out using software that simulates water movement and parameter estimation. Model calibration was carried out by minimizing an objective function calculated from the differences between simulated and observed groundwater levels, and between simulated and observed repeat microgravity data. Including repeat microgravity data in the objective function reduced the uncertainty in estimated parameter values for saturated hydraulic conductivity and saturated water content. Modeling indicated that the unsaturated zone between the recharge basins and the water table does not become saturated even after 685 days of simulated infiltration. This gradual wetting may account for increasing infiltration rates over time, as hydraulic conductivity increases with increasing water content. Unsaturated-zone water content decreased rapidly between recharge cycles. Model-simulated groundwater mounding extended about 1 kilometer from the center of SHARP after the 685-day period following the onset of recharge.

Arizona↗
USGS2024

Plan to coordinate post-earthquake investigations supported by the National Earthquake Hazards Reduction Program (NEHRP)

Introduction This report presents a plan supported by the National Earthquake Hazards Reduction Program (NEHRP) to coordinate domestic and international post-earthquake investigations (herein called “the Plan”). Post-earthquake scientific and engineering investigations are undertaken to capture critical information to understand the causes and impacts of the event, lessons from which can substantially improve the Nation’s resilience after future earthquakes. NEHRP is the Federal Government’s coordinated nationwide program to reduce risks to life and property from earthquakes. The Plan describes the activation and coordination of the four designated NEHRP Agencies in the Federal Government: Federal Emergency Management Agency, National Institute of Standards and Technology, U.S. National Science Foundation, and U.S. Geological Survey (USGS). The Plan also describes coordination between NEHRP Agencies and other organizations that may participate in pre-event and post-earthquake investigations, including non-NEHRP Federal agencies; State, regional, local, Tribal, and territorial agencies; domestic nongovernmental organizations; academic institutions and affiliated organizations; private companies; foreign governmental agencies and nongovernmental organizations; and international organizations. The Plan delineates the coordination of NEHRP post-earthquake scientific and engineering investigations to document the direct, indirect, and cascading physical and societal impacts from fault rupture and ground shaking hazards and from secondary hazards such as landslides, liquefaction, and tsunamis. In addition, the Plan identifies pre-event activities necessary to ensure that post-earthquake investigations are executed effectively. The USGS is the lead NEHRP Agency for activating and coordinating NEHRP post-earthquake investigations and for implementing this Plan. The USGS also leads coordination of the NEHRP Agencies in completing the pre-event activities identified in the Plan. The Plan has new information and supersedes USGS Circular 1242, “The Plan to Coordinate NEHRP Post-Earthquake Investigations,” which was published in 2003. This second-generation Plan was developed with the assistance of the Applied Technology Council (ATC) of Redwood City, California, under USGS contract 140G0121P0309, ATC-155. A 17-member Project Review Panel provided guidance on plan development, and input was solicited from subject matter experts representing key stakeholder groups and from participants at a public workshop.

Circular↗
USGS2025

Smectite-rich horizons in Inceptisols trigger shallow landslides in tropical granitic terranes

Puerto Rico was affected by >70,000 landslides in the wake of 2017 Hurricane Maria, and landslide prevalence was especially high in the Utuado region in the Cordillera Central. Landslide density was highest where soil parent material is granodiorite; landslide slip surfaces tended to be shallow (<60 cm), and often were mobilized rapidly and with long runout distances. This study combines field observations with soil mineralogy (bulk and clay fractions), soil geochemistry (bulk fraction), and soil strength as determined by field cone penetrometer testing (CPT) to test the hypothesis that clay-rich subsoil horizons function as slip planes when water-logged. Soil pits were excavated to depths of ∼200 cm in Ultisols on an undulating plateau and to ∼100 cm in Inceptisols on steep slopes (36-43 o ) that flank the plateau and cone penetrometer tests (CPT) were done within 2 m of the soil pit. Six pits were located adjacent to scarps from previous landslides, enabling analysis of soil profiles downward through extrapolated slip surfaces. Results from X-ray diffraction (XRD), X-ray fluorescence (XRF) and thermogravimetric analysis (TGA) indicate that soils are heterogeneous, often with subsoil horizons enriched in clay minerals and immobile elements (Al, Fe, Ti). Inceptisols on steep slopes often contain smectite-rich horizons at 30–60 cm depth that appear to function as slip surfaces; in other Inceptisols, such horizons are not present and landslide susceptibility is potentially lower. In Ultisols, soil mineralogy is dominated by kaolinite with minor halloysite, and increased kaolinite content at soil depths ≥80 cm at some sites suggests potential slip surfaces enhancing probability of landslides. The origin of clay-rich horizons appears to be (1) fractures in granodiorite that facilitate water flow and leaching, accelerating mineral dissolution during early weathering stages, and (2) smectite-rich buried soils under permeable colluvium likely deposited by a prior mass wasting event. Where clay-rich layers occur beneath more-permeable horizons, rapid infiltration then absorption of water in clay-rich subsoil horizons causes decreased shear strength and increased landslide susceptibility.

Puerto Rico↗
USGS2026

Compact seismicity bursts have different characteristics from regional seismicity

Earthquakes tend to cluster, developing into sequences driven by stress perturbations and transient fault-zone processes. Depending on the driving process, earthquake sequences show differing behaviors. This variability challenges our ability to observe or distinguish these driving processes in high resolution. Here we systematically identify seismicity bursts throughout southern California using new statistical methods and examine their causes with other independent geophysical observations. Seismicity bursts are defined as statistically significant seismicity rate anomalies. Our approach has the advantage of being data driven, depending on few earthquake occurrence assumptions. We find abundant seismicity bursts across southern California, most frequently occurring along the San Jacinto Fault and in the Salton Sea and Coso geothermal fields. These seismicity bursts are highly compact in space and time, often encompassed by a 5 km radius and have durations less than 10 hr. Many of the seismicity bursts have their largest earthquake near the beginning of the sequence, but the largest earthquake is usually not an obvious mainshock. We utilize a variety of independent geophysical data sets to analyze the characteristics of the seismicity bursts, finding that the seismicity bursts have low b-values, low spectral stress drops, and varied stress ratios compared to regional seismicity. These differences suggest that seismicity bursts are driven by transient processes acting frequently across fault networks.

California↗
USGS2025

Enhancing mineral systems exploration through geochronology, thermochronology, and isotope analysis: USGS Geochron and USGS Isotope databases

A mineral systems approach to mineral exploration provides a comprehensive framework for understanding ore deposit formation by examining the geodynamic, magmatic, hydrothermal, and sedimentary processes responsible for mineralization, alteration, and remobilization of economic mineral deposits. Temporal and thermal constraints on ore genesis are crucial for refining mineral system models and guiding predictive exploration strategies. Geochronology and thermochronology offer invaluable insights into the timing and thermal evolution of ore-forming processes, whereas isotopic analyses provide critical information on the source and geochemical history of ore-forming fluids. Combining these methodologies have proven highly effective for mineral exploration in regions like Australia, however, their combined application has been limited in the United States. To apply these tools to mineral systems-based exploration, the U.S. Geological Survey (USGS) has developed two products: (1) The USGS Geochron Database, and (2) the USGS Isotope Database. These databases provide centralized repositories of geo/thermochronological dates and data (Geochron Database) and both radiogenic and stable isotope data (Isotope Database) generated by the USGS and partners over the past decades. Integrating these datasets together and with traditional exploration approaches provides the mineral exploration community with powerful tools for determining the temporal and thermal histories of ore systems and identifying metallogenic source provinces.

Continental United States↗
USGS2025

Emerging investigator series: Post-wildfire sediment geochemical characterization reveals manganese reactivity and a potential link to water quality impairment in the Gallinas Creek watershed, New Mexico

Water quality post-wildfire is often impaired by increased turbidity and elevated concentrations of elements such as manganese (Mn) and iron (Fe). Precipitation events exacerbate these issues, due in part to increased erosion and transport of sediment from hillslopes to surface water. Both Mn and Fe are major redox-active elements in sediments that drive a variety of biogeochemical cycles, precipitate adsorptive phases, and can themselves be drinking water contaminants. By investigating Mn and Fe sediment geochemistry in post-wildfire sediment deposits, related water quality hazards can be assessed. To establish and strengthen this connection, we analyzed the geochemistry of sediment deposits and surface water in the Gallinas Creek watershed, New Mexico over 1.5 years post-wildfire. Analyses included particle size analysis, water extractions, sequential extractions and aqua regia extractions to determine metal partitioning in sediment deposits. Data demonstrate Mn concentrations were distributed across labile and reactive fractions, such as the exchangeable and oxyhydroxide fractions, while Fe concentrations were mainly associated with the residual fraction. Manganese concentrations in aqua regia extractions and several fractions of sequential extractions were also strongly and significantly correlated with fine-grained sediment while the same pools of Fe concentrations were not. Dissolved Mn concentrations in surface water were elevated (>50 μg L −1 ) multiple times over the 1.5 years post-wildfire, highlighting a relationship between sediment geochemistry and water quality. This work shows Mn in sediments mobilized post-wildfire has an influence on water quality and highlights how further investigation into Mn sediment redox processes and mineralogy post-wildfire can inform risk assessments and resource management.

New Mexico↗
USGS2026

Groundwater dependency and hydroclimatic influences on riparian and upland vegetation productivity, Upper San Pedro, Arizona, United States

In arid and semi-arid regions, groundwater sustains vegetation through subsurface water access, yet the responses of groundwater-dependent ecosystems (GDEs) to changing hydroclimate and groundwater availability are relatively understudied. This study investigates seasonal and spatial patterns in vegetation greenness using Landsat Enhanced Vegetation Index (EVI) values across riparian and upland zones in the semi-arid Upper San Pedro (USP) watershed, southern Arizona, which experiences a bimodal precipitation regime. We paired 25 years (2000–2024) of EVI and depth to groundwater (DTG) data from 89 wells and climate metrics (precipitation and vapour pressure deficit) to quantify the sensitivity of vegetation to subsurface moisture as well as atmospheric moisture supply and demand. Vegetation at wells near the USP riparian area showed strong associations between EVI and DTG anomalies during the monsoon season, indicating sustained groundwater use even during this wet period when summer precipitation is abundant. In contrast, upland vegetation that lacked access to groundwater showed minimal sensitivity in EVI to DTG and was generally less responsive to vapour pressure deficit. Interestingly, the riparian GDEs were not decoupled from precipitation and climate variability. These results underscore the importance of groundwater for maintaining riparian productivity and highlight the utility of remote sensing in identifying vegetation-climate-groundwater linkages across heterogeneous dryland landscapes.

Arizona↗
USGS2025

Drone-based radiometric surveys provide high-resolution mine waste characterization

Airborne radiometric surveys use passive geophysical techniques to characterize geochemical variations at or near earth’s surface. These methods have been used for a variety of mapping applications, including mineral resource evaluation. However, detailed characterization of smaller geologic targets, including mine waste features, requires flying at lower altitudes and with tighter line spacing than is feasible with traditional aircraft. Here, a small uncrewed aircraft system (sUAS) equipped with a radiometric sensor was used to acquire high-resolution gamma-spectrometry over small mine waste features and a low-grade stockpile in southwestern New Mexico. The sUAS radiometric system mapped local variability within each survey area and revealed ~2–10 m wide zones where radioelements K, Th, and U may be elevated 2–10× the surrounding material. Additionally, the sUAS radiometric data revealed radioelement variability across survey sites, which correlated reasonably well with variability seen in geochemical samples at each survey site, even though samples collected from individual sites showed high local variability. The sUAS data characterized local heterogeneity within mine waste and other small geologic targets at scales of a few meters to tens of meters, which is not possible with traditional crewed aircraft, and with continuity of coverage that is not possible with ground surveys, thus filling a key gap in geophysical survey spatial resolution.

New Mexico↗
USGS1998

Trace elements in streambed sediment and fish liver at selected sites in the Upper Colorado River Basin, Colorado 1995-96

Trace elements were analyzed in streambed-sediment samples collected from 16 sites and in fish-liver samples collected from 14 sites in the Upper Colorado River Basin in Colorado as part of the National Water-Quality Assessment program. Sites sampled represented agricultural, mining, mixed, and urban/recreation land uses and background conditions. The results for 15 trace elements in streambed-sediment and in fish-liver samples are presented in this report. Fourteen of the selected trace elements were detected in streambed-sediment samples collected at all sites. Twelve of the selected trace elements were detected in fish liver at more than 50 percent of the sites. Cadmium, copper, selenium, and zinc were selected for a more detailed analysis. Cadmium, copper, and zinc concentrations in streambed sediment were highest at mining land-use sites in the Southern Rocky Mountains physiographic province. Selenium concentrations in streambed sediment were highest at an agricultural land-use site in the Colorado Plateau physiographic province. The concentration of trace elements in streambed sediment generally increased as particle size decreased. Concentrations of trace elements in fish liver generally did not follow the same relation to land use as concentrations in streambed sediment; however, cadmium concentrations in fish liver were highest at a mining land-use site in the Southern Rocky Mountains physiographic province, and selenium concentrations in fish liver were highest at an agricultural land-use site in the Colorado Plateau physiographic province. Copper and zinc concentrations in fish liver were highest at mixed land-use sites. Comparison of streambed-sediment and fish-liver concentrations to two other similar NAWQA studies in the Rocky Mountain region generally indicated similar patterns in relation to land use for streambed sediment, but not for fish liver. Cadmium, copper, and zinc concentrations in streambed sediment were highest at sites affected by mining in all three study units. Selenium concentrations in streambed sediment did not indicate relations among the three study units when compared to land use. Cadmium in fish liver was highest at sites affected by mining in all three study units. Copper, selenium, and zinc in fish liver did not indicate relations among the three study units when compared to land use.

Colorado↗
USGS2026

Spatially referenced watershed models for the binational Red–Assiniboine River Basin: Bayesian vs frequentist comparison

Excess nutrient loading remains a leading cause of declining water quality in lakes, estuaries, and coastal waters worldwide, with global economic costs of US$200 billion – US$2 trillion annually from impacts on fisheries, tourism, freshwater resources, and water treatment. Our study focuses on total phosphorus (TP) in Lake Winnipeg and its binational Red-Assiniboine River Basin, where nutrient inputs have degraded water quality and increased cyanobacterial blooms. These changes pose ecological, public health, and economic risks. We applied a spatially referenced watershed model with a hybrid statistical-mechanistic structure partitioning annual nutrient loads into land-use export, land-to-water delivery, and in-reservoir decay. Bayesian and traditional frequentist model calibrations were compared. In the frequentist model, coefficients for agricultural inputs, forests /wetlands, stream channels, precipitation, and reservoir losses were statistically significant, whereas coefficient for wastewater was not. In contrast, all variables were successfully calibrated using the Bayesian approach. Model results delineate TP-export hotspots across the basin, showing that 54–62% of TP originates from the U.S., with agricultural sources ranging 62–72%—highlighting the importance of agriculture-focused Best Management Practices. Given the global relevance of nutrient-driven water-quality challenges, our results highlight Bayesian calibration for robust risk assessment and adaptive nutrient management.

Red–Assiniboine River Basin↗
USGS2025

Groundwater salinity: Applying the specific conductance and water type proxy

Groundwater is increasingly needed for water supplies but may have limited utility in some locations because of its salinity. Salinity, often expressed as total dissolved solid (TDS), is frequently estimated using specific conductance (SC) measurements. However, the commonly used proxy (0.65 multiplied by SC to indicate TDS, common in many handheld meters) can result in inaccurate TDS estimates. First, the TDS–SC relationship is not linear over the entire concentration range of groundwater. Furthermore, the TDS (and salinity)–SC relationships vary substantially depending on the major-ion composition. Here we develop a proxy method utilizing SC and major-ion water type to estimate TDS and salinity specifically for groundwaters. Compared to most surface waters, groundwater tends to have a wider range of salinity (fresh to highly saline) and higher concentrations of bedrock-derived solutes such as carbonate ions, silica, and many other ions. The dataset used to develop the proxies includes water chemistry data from 149,059 discrete groundwater samples. The groundwater proxies, which employ nonlinear log–log relations, utilize five water types (HCO 3 , Cl, Ca-Mg-SO 4 , Na-K-SO 4 , and mixed waters), are accurate (median percent difference between TDS and salinity determined using the proxy compared to discrete measurements was <±0.8%) over a wide range of SC (up to 200 mS/cm), rapid, cost-effective, and can be measured on-site.

Groundwater↗
USGS2024

Debris-flow entrainment modelling under climate change: Considering antecedent moisture conditions along the flow path

Debris-flow volumes can increase along their flow path by entraining sediment stored in the channel bed and banks, thus also increasing hazard potential. Theoretical considerations, laboratory experiments and field investigations all indicate that the saturation conditions of the sediment along the flow path can greatly influence the amount of sediment entrained. However, this process is usually not considered for practical applications. This study aims to close this gap by combining runout and hydrological models into a predictive framework that is calibrated and tested using unique observations of sediment erosion and debris-flow properties available at a Swiss debris-flow observation station (Illgraben). To this end, hourly water input to the erodible channel is predicted using a simple, process-based hydrological model, and the resulting water saturation level in the upper sediment layer of the channel is modelled based on a Hortonian infiltration concept. Debris-flow entrainment is then predicted using the RAMMS debris-flow runout model. We find a strong correlation between the modelled saturation level of the sediment on the flow path and the channel-bed erodibility for single-surge debris-flow events with distinct fronts, indicating that the modelled water content is a good predictor for erosion simulated in RAMMS. Debris-flow properties with more complex flow behaviour (e.g., multiple surges or roll waves) are not as well predicted using this procedure, indicating that more physically complete models are necessary. Finally, we demonstrate how this modelling framework can be used for climate change impact assessment and show that earlier snowmelt may shift the peak of the debris-flow season to earlier in the year. Our novel modelling framework provides a plausible approach to reproduce saturation-dependent entrainment and thus better constrain event volumes for current and future hazard assessment.

Illgraben basin↗
USGS2025

Increased flood exposure in the Pacific Northwest following earthquake-driven subsidence and sea-level rise

Climate-driven sea-level rise is increasing the frequency of coastal flooding worldwide, exacerbated locally by factors like land subsidence from groundwater and resource extraction. However, a process rarely considered in future sea-level rise scenarios is sudden (over minutes) land subsidence associated with great (>M8) earthquakes, which can exceed 1 m. Along the Washington, Oregon, and northern California coasts, the next great Cascadia subduction zone earthquake could cause up to 2 m of sudden coastal subsidence, dramatically raising sea level, expanding floodplains, and increasing the flood risk to local communities. Here, we quantify the potential expansion of the 1% floodplain (i.e., the area with an annual flood risk of 1%) under low (~0.5 m), medium (~1 m), and high (~2 m) earthquake-driven subsidence scenarios at 24 Cascadia estuaries. If a great earthquake occurred today, floodplains could expand by 90 km 2 (low), 160 km 2 (medium), or 300 km 2 (high subsidence), more than doubling the flooding exposure of residents, structures, and roads under the high subsidence scenario. By 2100, when climate-driven sea-level rise will compound the hazard, a great earthquake could expand floodplains by 170 km 2 (low), 240 km 2 (medium), or 370 km 2 (high subsidence), more than tripling the flooding exposure of residents, structures, and roads under the high subsidence scenario compared to the 2023 floodplain. Our findings can support decision-makers and coastal communities along the Cascadia subduction zone as they prepare for compound hazards from the earthquake cycle and climate-driven sea-level rise and provide critical insights for tectonically active coastlines globally.

California, Oregon, Washington↗
USGS2024

The 2023 Alaska National Seismic Hazard Model

US Geological Survey (USGS) National Seismic Hazard Models (NSHMs) are used extensively for seismic design regulations in the United States and earthquake scenario development, as well as risk assessment and mitigation for both buildings and infrastructure. This 2023 update of the long-term, time-independent Alaska NSHM includes substantial changes to both the earthquake rupture forecast (ERF) and ground motion models (GMMs). The ERF includes numerous additions to the finite-fault model, considers two deformation models, and introduces updated declustering and smoothing algorithms in the gridded background seismicity model. For the Alaska–Aleutian subduction zone, megathrust earthquakes occur on an updated structural and segmentation model, and the moment magnitude (M) 8+ rupture and rate model include a logic tree branch that considers slip rates derived from geodetic models of interface coupling. The megathrust model considers multiple models of down-dip width, and magnitudes are computed using newly developed scaling relations. For subduction intraslab events and subduction interface events with M < 7, the 2023 update uses a smoothed seismicity model with rupture depths derived from Slab2. The 2023 model updates GMMs in all tectonic settings using the recently published Next Generation Attenuation Subduction (NGA-Sub) GMMs for subduction interface and intraslab events, and the NGA-West2 GMMs for active crustal settings. Collectively, additions and updates to the Alaska NSHM result in hazard increases across most of south-central Alaska relative to the previous model, published in 2007. These changes are primarily due to the adoption of updated rate models for the large-magnitude interface events and the NGA-Sub GMMs that have much higher aleatory variability (sigma), consistent with global observations, and that include models of epistemic uncertainty.

Alaska↗
USGS2026

Spatio-temporal modeling for assessing geoenergy resources: A workflow applied to gas in place variation in coal beds

The ability to estimate spatio-temporal changes in hydrocarbon reservoir properties and energy resources within pore volumes is essential for optimizing production, reservoir management, geologic energy storage, and safety in underground mining operations. In coal seams, predicting remaining methane gas-in-place (GIP) is critical for quantifying producible gas and improving mine safety and productivity through effective ventilation planning. Although such changes are commonly evaluated using physics-based numerical simulation models, these approaches often require extensive data, calibration effort, and time. This study presents a spatio-temporal geostatistical modeling approach that bridges the gap between purely spatial models and full numerical simulations. The method is applied to a case study of coal seam degasification in the Mary Lee coal group, Black Warrior Basin, Alabama, USA, to estimate GIP evolution over time within a selected mining district. The analysis uses published data from prior natural gas production history-matching of degasification using vertical wells. Empirical spatial and temporal statistics were calculated for reservoir pressure and water saturation, and spatio-temporal variogram models were fitted to experimental variograms. These models provided the structural basis for spatio-temporal kriging, integrated with spatial estimates of time-invariant parameters (porosity, density, and thickness) to estimate GIP. This approach enabled estimation of GIP changes over time, including periods without data. Boxplots of GIP estimates indicated systematic depletion and decreasing spatial variability, reflecting the impacts of degasification. Comparison with cumulative gas production from empirical well records showed approximately 85% agreement based on a relative similarity metric. Spatio-temporal GIP estimates were also used to estimate methane emissions to longwall ventilation systems and compared with reported emissions from the U.S. EPA Greenhouse Gas Reporting Program, showing similar distributions (≈80%) given data limitations. Overall, this integrated modeling approach provides time-dependent GIP estimates with broader implications for resource assessment applications.

Alabama↗
USGS2024

The EnMAP spaceborne imaging spectroscopy mission: Initial scientific results two years after launch

Imaging spectroscopy has been a recognized and established remote sensing technology since the 1980s, mainly using airborne and field-based platforms to identify and quantify key bio- and geo-chemical surface and atmospheric compounds, based on characteristic spectral reflectance features in the visible-near infrared (VNIR) and short-wave infrared (SWIR). Spaceborne missions, a leap in technology, were sparse, starting with the CHRIS/PROBA and EO1/Hyperion missions in the early 2000s, and providing spectroscopy data with limited spectral coverage and/or low data quality in the SWIR. Since 2019, several countries and agencies have successfully launched a number of spaceborne imaging spectroscopy systems into orbit or deployed them on the International Space Station (ISS) such as DESIS, PRISMA, HISUI, GF-5, EnMAP and EMIT. Among these recent missions, the German Environmental Mapping and Analysis Program (EnMAP) stands for its long-term development, sophisticated design with on-board calibration, high data quality requirements, and extensive accompanying science program. EnMAP was launched in April 2022 and, following a successful commissioning phase, started its operational activities in November 2022. The EnMAP mission encompasses global coverage from 80° N to 80° S through on-demand data acquisitions. Data are free and open access with 30 m spatial resolution, a high spectral resolution with a spectral sampling distance of 6.5 nm and 10 nm in the VNIR and SWIR regions respectively, and a high signal-to-noise ratio. In this paper, we aim to present the mission's current status, coverage, science capabilities and performance two years after launch. We show the potential of EnMAP for space-based imaging spectroscopy to operate in various environments, including high and low light levels, dense forests, Antarctic glaciers, and arid agricultural areas. EnMAP enables various applications in fields such as agriculture and forestry, soil compositional, raw materials, and methane mapping, as well as water quality assessment, and snow and ice properties. The results show that EnMAP's performance exceeds the mission requirements, and highlights the significant potential for contribution to scientific exploitation in various geo- and biochemical sciences. EnMAP is also expected to serve as a key tool for the development and testing of data processing algorithms for upcoming global operational missions.

Remote Sensing of Environment↗