Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Frontiers in Environmental Science.”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,607 records · Page 87Linked to original sources
USGS2026

Streamflow, base-flow, and precipitation trends and simulated effects of groundwater withdrawals from the North Fork Red River aquifer on base flows upgradient from Lake Altus, western Oklahoma, 1980–2022

The U.S. Geological Survey, in cooperation with the Bureau of Reclamation, used five scenarios created from a previously published numerical groundwater-flow model (1980–2013) and historical streamflow records (1980–2022) to investigate the relation between groundwater withdrawals from the North Fork Red River aquifer and inflows to Lake Altus from the North Fork Red River in western Oklahoma. The five scenarios were (1) a scaled-equal-proportionate-share (EPS) groundwater-withdrawal scenario, (2) a study-area-scaled-reported groundwater-withdrawal scenario, (3) a zonal-scaled-reported groundwater-withdrawal scenario, (4) a historical drought-threshold scenario, and (5) a base-flow and evapotranspiration depletion scenario. For the scaled-EPS groundwater-withdrawal scenario, EPS groundwater withdrawals were often much higher than reported groundwater withdrawals and greatly decreased base flows for most scale factors. For the study-area-scaled-reported groundwater-withdrawal scenario, base flows were reduced more but by smaller percentages during wet periods than during dry periods when scaling simulated reported groundwater withdrawals. For the zonal-scaled-reported groundwater-withdrawal scenario, scaling simulated reported groundwater withdrawals within selected zones with more groundwater withdrawals did not always affect base flows more than scaling reported groundwater withdrawals within zones with less groundwater withdrawals. For the historical drought-threshold scenario, curtailing groundwater withdrawals at the drought thresholds increased annual base flows to Lake Altus by about 1,169 to 3,665 acre-feet. For the base-flow and evapotranspiration depletion scenario, the distance between a groundwater well and a stream was a major factor affecting base flow to the North Fork Red River when increasing groundwater withdrawals; however, spatially variable hydrologic properties and saturated-zone evapotranspiration could also affect the relation between base flows and groundwater withdrawals.

Oklahoma↗
USGS2026

Utilization of multiple geochronology techniques to constrain the age of laterization and mineralization of the world-class Mount Weld rare earth element deposit, Western Australia

Pervasive chemical weathering on stable cratons may form thick regoliths and elemental enrichment, but constraining the age of regolith formation is challenging. In this study we utilize multiple geochronological techniques on different minerals from the world-class Mount Weld rare earth element (REE) deposit, formed by lateritic weathering of a carbonatite, to constrain the age of formation and provide insight into landscape evolution. The oldest dates, ca. 100 to 38 Ma, are from Lu-Hf dating of churchite [HREE(PO 4 )·2(H 2 O)], a heavy REE phosphate mineral. Growth bands on individual minerals show a younging outwards. 40 Ar/ 39 Ar geochronology of cryptomelane [K(Mn 4+ ,Mn 2+ )₈O₁₆] yielded dates from ca. 40 to 27 Ma. Similarly, (U-Th)/He geochronology of goethite [FeO(OH)] yielded dates ranging from ca. 45 to 19 Ma. Integrating results into regional constraints, suggests 1) churchite formed by mineral saturation in a karst-like setting below the water table from ca. 100 to 40 Ma, 2) with minor uplift and erosion, cryptomelane and goethite formed at or near the water table between ca. 45 and 19 Ma, 3) after ca. 15 to 10 Ma chemical weathering within the profile had ended. Other studies document that the region experienced minimal uplift and a wet, warm climate from ca. 100 Ma to 15 Ma. These conditions and the high carbonate content of the carbonatite promote extensive chemical weathering, a deep weathering profile, and the preservation of the weathered section. This study highlights the use of multiple geochronological techniques utilizing different minerals to provide insight into how laterites form and to constrain the timing and history of the formation of this important mineral deposit.

Western Australia↗
USGS2025

Refinements to the attenuated propagation of local earthquake shaking (APPLES) ground-motion-based earthquake early warning algorithm

We refined the Attenuated ProPagation of Local Earthquake Shaking (APPLES) ground-motion-based earthquake early warning (EEW) approach, and directly compare APPLES performance with that of the source-characterization-based U.S. ShakeAlert EEW system for a suite of historical earthquakes in the U.S. West Coast and Japan. APPLES is an extension of the Propagation of Local Undamped Motion (PLUM) algorithm in which observed shaking intensity at seismic stations is used to forward-predict intensity distributions to surrounding areas using an attenuation model derived from an intensity prediction equation. We test new configuration options within APPLES, such as using the second highest estimated ground motion rather than the maximum, to better match median ground-motion observations and reduce alerts for small magnitude earthquakes, both of which are key alerting priorities within ShakeAlert. We evaluate these configurations alongside ShakeAlert by comparing the ground-motion estimation accuracy and available warning times relative to station observations and ShakeMap distributions. Our preferred APPLES configuration produces accurate ground-motion estimates and corresponds better with median observations compared to ShakeAlert’s estimates. This preferred configuration substantially reduces alert issuance for M < 5.0 earthquakes compared to the previous APPLES configuration, and alert-release criteria can further restrict alerts to primarily M ≥ 5.5 earthquakes without requiring magnitude estimation. Prioritizing matching median-observed ground motions may reduce APPLES warning times compared to configurations that were tuned to avoid missed alerts (such as those that use the maximum estimated ground motions), which can lead to shorter warning times compared to ShakeAlert for the same alert threshold. However, station-based warning time assessments demonstrate that APPLES can outperform ShakeAlert for high target thresholds. APPLES is a simple, independent EEW approach that may improve the robustness of EEW for the West Coast of the U.S.

California, Oregon, Washington↗
USGS2026

Using a temporary emigration model to estimate abundance of stream fishes from hybrid removal surveys with and without block nets

Monitoring programs are often faced with a decision to allocate resources into either robust spatiotemporal coverage to estimate a population index (e.g., not true abundance) or confirming closed sampling conditions (e.g., with block nets) for an unbiased population estimate at the cost of spatiotemporal coverage. However, making accurate and precise abundance estimates at robust spatiotemporal scales is possible when combining open and closed sampling designs with integrated modeling techniques. We used simulations and a case study of backpack electrofishing surveys in the Santa Ana River, California to test the efficacy of an integrated abundance model (temporary emigration model, TE) to estimate abundance of fishes using removal sampling methods with a hybrid sampling design (sampling with and without block nets during removal sampling). We found that the TE model performed well under most modeling scenarios (sample size, amount of closure violation, number of samples collected during closure), although at least a few samples with block nets were necessary for all parameters to be estimable. When applied to fish surveys in the Santa Ana River, we found that catch of the fishes fit to the TE model (Santa Ana Sucker, Arroyo Chub, Channel Catfish, Largemouth Bass, Yellow Bullhead) showed little evidence that the closure assumption was violated when block nets were not used. Additionally, we found that the abundance of non-native fishes negatively affected the abundance of the native Santa Ana Sucker, which was also found to adversely affect the native fish’s access to critical habitat consisting of gravel and cobble substrate. Our results indicate that the TE model presents a viable solution to common sampling problems that impact many monitoring programs, where precise and accurate population estimates can be made at large spatiotemporal scales even when most samples violate the closure assumption.

California↗
USGS2026

U.S. Geological Survey Monitoring Milestones—Oe-151 at Woodgate, NY (433112075091501)

On July 9, 1926, monitoring well Oe-151 at Woodgate, New York (USGS ID 433112075091501) recorded its first groundwater data. Since then, the well has provided water data nearly continuously and has now reached a 100-year milestone for data collection. The well is part of the U.S. Geological Survey (USGS) Climate Response Network (CRN), which is a national network of wells selected to monitor natural groundwater conditions. Well Oe-151 is the first well in the network to reach a 100-year Centennial milestone.

New York↗
USGS2025

U.S. Geological Survey National Groundwater Climate Response Network

What is the U.S. Geological Survey National Groundwater Climate Response Network? The U.S. Geological Survey’s (USGS) National Water Monitoring Network is a network of networks that includes the Climate Response Network (CRN). The CRN is a network of wells selected to monitor the effects of climate variability, including droughts, on groundwater systems within the United States, Puerto Rico, and the U.S. Virgin Islands. The primary purpose of the CRN is to monitor these effects on groundwater levels in unconfined or near-surface confined aquifers that are minimally affected by pumping or other human-induced stresses.

Fact Sheet↗
USGS2024

Getting to the surface of the problem: A dynamic rupture benchmark for shallowly dipping faults near Earth’s surface

The Statewide California Earthquake Center (SCEC) Dynamic Rupture Group workshop “Getting to the Surface of the Problem: A Dynamic Rupture Benchmark for Shallowly-Dipping Faults Near Earth’s Surface” was convened virtually, in an online meeting on November 4, 2024. 52 people participated, including two who sent pre-recorded lightning talks earlier, but were unable to join us that day due to the international time-zone difference. One-half of our participants were students or postdocs, and the group included scientists from 11 countries (USA, Canada, China, Czech Republic, France, Germany, Iceland, Japan, New Zealand, Saudi Arabia, Switzerland).

Final Report↗
USGS2025

Favorability mapping for hydrothermal power resource assessments of the Great Basin, USA

The U.S. Geological Survey (USGS) is updating the 2008 assessment of conventional hydrothermal resources for the Great Basin in the western United States. As part of this work, the workflow for hydrothermal resource favorability maps is being modified to integrate modern data-driven machine learning (ML) methods. Improvements include: [1] using new and refined evidence layers (features); [2] using an order of magnitude more training sites (labeled examples); [3] utilizing simple but non-linear supervised ML algorithms; [4] representing positive training sites (wells with measured heat flow) with their ordinal value proportional to the magnitude of convective upflow (i.e., low, high, or very high convective signals instead of past strategies using positive-negative labels); [5] supplementing training sites with additional sites with low convective signals to represent diverse under-sampled areas where hydrothermal systems are unlikely to exist; [6] comparing with competing approaches; and [7] utilizing Monte Carlo cross-validation to estimate and evaluate prediction uncertainty. For the new favorability map, over half of the power-producing systems (i.e., 15 of 28) are predicted in the 99th percentile of most favorable locations (i.e., the highest 1 % of favorability, corresponding to 1 % of the map area), exceeding the performance of past models that have explicitly used power plants as training sites. Previous favorability maps predicted approximately half of the power-producing hydrothermal systems above the 80th percentile (i.e., 20 % of the map area). For the new favorability map, 93 % of power-producing systems (i.e., 26 of 28) are above the 80th percentile. The power-producing systems for which the new model does not perform well are either comparatively small, low-temperature systems or systems also not predicted well by prior modeling approaches, suggesting that these few systems are unusual when compared with most power-producing systems. Focusing research on these known, seemingly different systems may yield new insights and subsequent discovery of new prospects.

California, Idaho, Nevada, Oregon, Utah↗
USGS2025

Broadband stochastic simulation of earthquake ground motions with multiple strong phases with an application to the 2023 Kahramanmaraş, Turkey (Türkiye), earthquake

Stochastic ground motion simulation models are often less accurate at lower frequencies than at higher frequencies when fitting recorded data unless supplemented by a deterministic forward directivity velocity pulse model. Moreover, time-modulated stochastic models, which adjust ground motion amplitudes over time, typically use functions that fail to capture multiple strong-motion phases. The February 2023 Turkey (Türkiye) earthquake exhibited diverse recordings, including near-fault and far-field motions with pulse-like and non-pulse-like characteristics, along with single and multiple strong-motion phases. To better represent such a diverse set of recordings, this study enhances a fully non-stationary site-based stochastic model without combining it with a deterministic model. Improvements include a new band-pass filter with upper- and lower-frequency limits, which refines the representation of the low-frequency content. Moreover, a time-modulating function that can represent energy arrival in multiple strong phases is introduced. The reference model’s parameters are identified by fitting to the energy content, zero-level crossings, and cumulative counts of positive-minima and negative-maxima of a target accelerogram. This fitting procedure is modified to address the increased number of parameters. These improvements broaden the reference model’s applicability while preserving its simplicity, a key aspect appealing to engineering practitioners. The improved model’s applicability is demonstrated by simulating a dataset from the February 2023 Türkiye earthquake, and the accuracy is tested using a pulse-like Next Generation Attenuation Relationships for Western United States dataset. Validations are performed based on total energy, zero-level crossings, Fourier amplitude spectrum, elastic response spectra, and peak ground motion parameters. Validations are performed schematically in the time and frequency domains and quantitatively using goodness-of-fit scores, various validation-metrics errors, and inter-period correlations. Overall, the improved stochastic model can effectively simulate a set of diverse ground motion recordings, including near-fault pulse-like records, records with multiple strong phases, and far-field motions across a broad frequency range.

Kahramanmaraş↗
USGS2026

Efficient physics‐informed ground‐motion simulations with reduced‐order models: CyberShake implications and high‐resolution site terms for southern San Andreas fault earthquakes

Recent advances in Probabilistic Seismic Hazard Analysis (PSHA) leverage physics‐based ground‐motion simulations to estimate seismic hazard, such as the CyberShake project. However, computational costs quickly escalate when performing PSHA for numerous faults or sites and can become prohibitively expensive. To reduce computational demands, CyberShake uses reciprocity and interpolates physics‐informed corrections from simulations conducted at fewer locations, but the accuracy of these interpolations remains poorly quantified. To quantify the interpolation accuracy, we derive high‐resolution, frequency‐dependent site terms for southern California and compare them with interpolated site terms using the CyberShake approach. We accomplish this by performing a set of earthquake point‐source simulations distributed along the nonplanar fault geometry for the southern San Andreas fault (SSAF) extending from Bombay Beach to Lake Hughes. Using SeisSol, we simulate three minutes of viscoelastic seismic wave propagation for these sources and store the horizontal‐component Green’s functions for 480,000 sites. We then use a scientific machine learning approach based on interpolated proper orthogonal decomposition to construct an accurate reduced‐order model of the Green’s functions to efficiently predict effective amplitude spectra (EAS) for finite‐source rupture models of SSAF earthquakes. Using minimum curvature interpolation with tension, as used in CyberShake, we compare the interpolated site terms against our high‐resolution site terms. We identify local discrepancies with EAS differing by up to a factor of approximately three. Furthermore, we identify locations where unexpectedly high or low ground motions are missed when using the interpolated dataset for these earthquakes. We estimate that our approach may be used within CyberShake to reduce the time‐to‐solution by a factor of 336 for the entire earthquake rupture forecast. Our analysis of physics‐based site terms provides more insight into the seismic hazard due to SSAF ruptures and guides future developments by combining high‐performance computing and reduced‐order modeling techniques for PSHA.

California↗
USGS2026

Methodology for quantitative spatial sensitivity analysis of volcanic geodetic networks

Introduction This report introduces a methodology for assessing the state of the U.S. Geological Survey Volcano Observatories’ geodetic monitoring networks that measure how volcanoes deform or change shape. This new method uses a model-based approach that considers the uniqueness of the instrument environments at each volcano. This report focuses on simplified volcanic sources, is independent of the shape or size of the volcano, or the network geometry, and thus highlights the strengths and potential vulnerabilities of each volcano’s geodetic network in an actionable visual format. This analysis can help observatories to make informed decisions about whether volcanoes have an adequate level of geodetic monitoring and indicate where improvements are needed.

Lassen Peak, Mount Shasta↗
USGS2026

pySATSI: A Python package for computing focal mechanism stress inversions

We introduce pySATSI, a Python package for computing earthquake focal mechanism stress inversions. This algorithm can handle a wide variety of types of stress inversion problems with a single script and can duplicate many capabilities of preceding methodologies. We also add new capabilities that include spatiotemporally variable inversion grids, damped stress estimates for clusters with few or no focal mechanisms, and variable fault‐plane ambiguities that the user can assign to individual events. In addition, we added the ability to use damped stress inversions with fault‐plane ambiguity probabilities that are weighted by fault instabilities. Our algorithm is computationally efficient with faster runtimes than previous algorithms, scales well for large datasets, and can be easily parallelized.

Seismological Research Letters↗
USGS2025

The U.S. Geological Survey, the U.S. Department of Defense, and the U.S. Intelligence Community—100 years of mapping and remote sensing collaboration, 1879–1979

Introduction The U.S. Geological Survey (USGS)—a Federal civilian agency—and U.S. military and intelligence agencies collaborate on mapping and remote sensing and have since the establishment of the USGS. The organizations exchange data and information and share technology to further their respective missions in service to the American people. Often referred to as examples of “good government” or “whole of government,” the collaboration avoids costly duplication and maximizes time and effort for the government sectors. Collaboration between these sectors started with the original mapping of the United States and evolved to include remote sensing after the advent of aerial photography and satellite imagery.

Circular↗
USGS2025

Bathymetric and acoustic-backscatter mapping of Lake Sammamish, Washington, during USGS field activity 2021-656-FA

In 2021, scientists from the U.S. Geological Survey (USGS) acquired bathymetric and acoustic-backscatter data within Lake Sammamish, Washington. Mapping was completed to find evidence of past earthquakes such as underwater landslides and is part of a larger USGS project to understand the overall geologic hazards history of the Cascadia Margin region. The survey was conducted using the USGS research vessel Parke Snavely outfitted with an interferometric sidescan-sonar system for swath mapping. Three estimates of bathymetric uncertainty were calculated from the post-processed bathymetric data. This report provides a summary of the mapping mission.

Washington↗
USGS2025

2023 Earthquake Ground-Motion Workshop for the Central and Eastern United States, with a focus on the Gulf and Atlantic Coastal Plains—Agenda and abstracts

The U.S. Geological Survey held a virtual workshop December 7–8, 2023, to share research and ideas about earthquake ground motions in the Central and Eastern United States, with a focus on the Atlantic and Gulf Coastal Plains. The workshop was organized to learn about potential regionalization of ground-motion characteristics (source, path, and site), consider new explanatory variables for site response, and hear and discuss updates on ground-motion research on the Atlantic and Gulf Coastal Plains. The workshop was organized into a series of contributed presentations and three panel discussions held during 2 days. This report documents the agenda, contributed abstracts, and panel summaries.

Scientific Investigations Report↗
USGS2026

Velocity-independent dry friction on mica: A realization of ideal Amontons-Coulomb friction

The Amontons-Coulomb friction law assumes that the frictional force between materials is independent of sliding velocity. However, as Coulomb noted, this is a rough approximation, and a second-order dependence of friction on the logarithm of sliding velocity is incorporated in a commonly used ‘rate- and state-dependent’ friction representation. Here we conduct shear experiments on mica, a layer-structured mineral, at temperatures ranging from 25 to 200ºC and under normal stress of 100 MPa. The friction coefficient clearly depends on the logarithmic sliding velocity at 25ºC, but rate sensitivity decreases with increasing temperature until at 200ºC, the friction coefficient is independent of sliding velocity. Our findings could initiate the development of velocity-independent frictional materials, realizing the ideal Amontons-Coulomb friction.

Physical Review Letters↗
USGS2025

U.S. Geological Survey research and assessments supporting carbon dioxide removal

Both carbon capture and storage (CCS) and carbon dioxide removal (CDR) are methods to limit future global temperature rise and ocean acidification. CCS sequesters (stores) carbon dioxide (CO2) captured from industrial sources thereby preventing the CO2 from reaching the atmosphere. The captured CO2 is injected into underground geologic reservoirs or is converted into stable industrial products. CDR enhances natural processes or uses technical approaches to remove excess CO2 from the atmosphere. Carbon dioxide is sequestered in natural sinks such as vegetation and soil, or injected into underground reservoirs or converted into durable products. The U.S. Geological Survey (USGS) conducts research and resource assessments that support biologic and geologic CDR approaches. This report will review some of the ongoing USGS CDR research and assessment efforts.

Conference Paper↗
USGS2026

USGS Geochron Database

Introduction Geochronology helps us understand Earth’s history by determining when important events, like volcanic eruptions, the rise of mountains, the formation of mineral resources, and changes in the landscape, happened. Geochronological data directly support geologic mapping and can inform decisions about geologic hazard mitigation, natural resource management, and infrastructure resilience. The U.S. Geological Survey (USGS) Geochron database provides access to more than 300,000 published, publicly available age measurements from more than 40,000 geological samples. This database is the result of a collaborative effort with State geological surveys and geoscientists from across the globe. The USGS Geochron database is the most comprehensive collection of geochronological data available for the United States. Users can view data through an interactive map explorer, download datasets, and integrate data into geospatial software or other analysis tools.

Fact Sheet↗