Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Environmental Modeling and Software”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,663 records · Page 87Linked to original sources
USGS2026

New measurements indicate that natural geologic methane emissions from microseepage in the Michigan Basin are likely negligible

The magnitude of natural geologic methane (CH 4 ) emissions to the atmosphere (including emissions of fossil CH 4 from offshore and onshore gas and oil seeps, diffuse microseepage, mud volcanoes, volcanic vents, and geothermal areas) is highly uncertain. The largest component of geologic emissions is thought to be microseepage, which is the diffuse flux of CH 4 from soils across large areas of productive hydrocarbon basins. The accuracy of existing bottom-up estimates of microseepage is limited by low spatial coverage of published microseepage measurements. We present the first soil—atmosphere CH 4 flux measurements from Michigan Basin, USA. Results from 335 measurements taken during summer and winter seasons across a large portion of the basin suggest microseepage is nonexistent in the sampled region. Even areas with predictive features for microseepage (e.g., underlying mature, organically rich source rocks, proven gas accumulations, faults, and lineaments) yield null or negative fluxes, suggesting that CH 4 emissions from microseepage are negligible throughout our study region. A Monte Carlo method was used to place an upper limit on the regional-mean microseepage flux, in which synthetic patchy microseepage distributions were generated and tested against our observations to assess the impact of possible emission hot spots that were missed by our sampling strategy. Our analysis finds it is very unlikely that regional-mean emissions are as high as assumed in a previous global microseepage study. The observed lack of seepage may be explained by groundwater flow, active methanotrophy, glacial sediments, and bedded salt deposits, which could inhibit vertical gas migration and release to atmosphere.

Michigan↗
USGS2026

Cruise summary—Samoa Basin abyssal mapping—Box coring leg, Pago Pago, Territory of American Samoa to Pago Pago, American Samoa, April 11– May 1, 2026

Expedition Summary U.S. Geological Survey scientists led a box coring effort to the Samoa Basin to characterize minerals and the surrounding abyssal sediments and fauna. Thirty-eight box cores were deployed between April 13, 2026, and April 28, 2026. Thirty-six box cores recovered sufficient material to determine nodule density, and 35 recovered sufficient material for subcores to be collected. The purpose of this Data Report is to provide a summary of samples collected, initial results that were obtained shipboard, and briefly mention planned future analyses from this expedition.

Data Report↗
USGS2025

Footprints of past mining in Alaska (USA) derived from high-resolution satellite imagery

Mapping the land area used for mining in the past is essential for guiding the remediation of affected landscapes and assessing the resource potential of related waste products. Despite significant recent progress delineating footprints of active and inactive mining globally, the known inventory of such mine lands remains incomplete. Here, I describe a new map dataset of footprints of land surface disturbance and waste at sites of past mining in Alaska (USA) based on visual interpretation of satellite imagery. This dataset maps 6–14 times the area of previous regional and global mine footprint maps in Alaska and is the first in the region to explicitly delineate mine waste landforms (e.g., tailings piles). The data are publicly available from the U.S. Geological Survey under a “no rights reserved” Creative Commons (CC0) license agreement.

Alaska↗
USGS2024

The SCEC/USGS community stress drop validation study using the 2019 Ridgecrest earthquake sequence

We introduce a community stress drop validation study using the 2019 Ridgecrest, California, earthquake sequence, in which researchers are invited to use a common dataset to independently estimate comparable measurements using a variety of methods. Stress drop is the change in average shear stress on a fault during earthquake rupture, and as such is a key parameter in many ground motion, rupture simulation, and source physics problems in earthquake science. Spectral stress drop is commonly estimated by fitting the shape of the radiated energy spectrum, yet estimates for an individual earthquake made by different studies can vary hugely. In this community study, sponsored jointly by the U. S. Geological Survey and Southern/Statewide California Earthquake Center, we seek to understand the sources of variability and uncertainty in earthquake stress drop through quantitative comparison of submitted stress drops. The publicly available dataset consists of nearly 13,000 earthquakes of M1 to 7 from two weeks of the 2019 Ridgecrest sequence recorded on stations within 1-degree. As a community study, findings are shared through workshops and meetings and all are invited to join at any time, at any interest level.

Seismica↗
USGS2026

Measuring stress In high pressure deformation experiments with high speed fiber-optics

High‐pressure, high‐temperature rock deformation experiments are essential for understanding deep Earth processes, but accurately measuring stress is challenging due to the inaccuracy introduced by seal friction within the apparatus and large inertia, which affects earthquake process measurements made far from the experimental fault. To overcome these limitations, we developed and implemented a simple, compact fiber‐optic sensor based on an External Cavity Fabry–Perot Interferometer for in situ load measurement on a piston inside the pressure vessel of a Griggs‐type high‐pressure apparatus. The sensor can be used at sample temperatures up to 800°C for both slow creep and fast rupture testing with bandwidth capability from DC to 6 MHz. Two important experimental results are described: (1) the first direct measurements of seal friction in this apparatus type; these measurements record seal friction approximately one‐tenth of the confining pressure under both low (150 MPa) and high (1 GPa) pressure conditions; and (2) high‐temporal resolution capture of dynamic stress drops during stick‐slip faulting events at high‐confining pressure, revealing near‐fault wave propagation details, high‐frequency oscillations, and implying high‐transient slip rates (6–12 m/s) previously inaccessible with external sensors.

The Seismic Record↗
USGS2025

Critical minerals in mine waste

Introduction Critical minerals are commodities with vulnerable supply chains that play a vital role in supporting the United States’ economy, national defense and security, emerging technologies, and energy independence. The prosperity of our Nation depends on generating a resilient supply of domestic critical minerals; mine waste may be an untapped source of these commodities. Mine waste from centuries of legacy mining persist on the landscape and may contain critical minerals and other valuable commodities previously deemed uneconomic to recover. At modern mines, the financial viability of recovering byproduct critical minerals, which are not the primary target, may be marginal and can ultimately destine them to mine waste. Further, mine waste can be a liability for the mining company or, at legacy mines, the taxpayer because of its effect on the landscape. The U.S. Geological Survey (USGS) has several initiatives to evaluate critical mineral resources in various types of waste. This factsheet highlights studies of mine waste carried out by USGS scientists at the Geology, Energy & Minerals Science Center in collaboration with other science centers funded through the USGS Mineral Resources Program. Recovery of critical minerals from mine waste can aid in remediation efforts and increase domestic supply of vital mineral resources.

Fact Sheet↗
USGS2026

Rapid characterization of the 2025 Mw 8.8 Kamchatka, Russia earthquake

The 29 July 2025 M w 8.8 Kamchatka, Russia, earthquake was the sixth largest instrumentally recorded earthquake. This event was seismically well observed at regional and teleseismic distances, but publicly available near‐source data were sparse at the time of the event, presenting unique challenges for rapid source and impact characterization. The U.S. Geological Survey (USGS) National Earthquake Information Center provides global real‐time monitoring for earthquakes, including rapid response information products that estimate source characteristics, shaking, and the resulting impacts. We describe the USGS rapid response earthquake information products following the Kamchatka event and discuss their implications for ongoing hazards in the region. We describe potential improvements to our response workflows motivated by this event, including more rapid constraints on source geometries and the automated selection of fault geometries for finite‐fault inversions. The rapid response products together support the interpretation of a unilateral southwestward rupture with significant slip on the southwestern end of the rupture extent. The M w 8.8–9.0 event in 1952, which ruptured a comparable extent of the Kuril–Kamchatka subduction interface, has many similarities to the 2025 rupture. This illustrates that slip deficits may remain following great earthquakes and highlights the usefulness of comparative studies between historic and modern events.

Kuril-Kamchatka subduction zone↗
USGS2025

Unlocking ecological insights from sub-seasonal visible-to-shortwave infrared imaging spectroscopy: The SHIFT campaign

We stand at the threshold of a transformative era in Earth observation, marked by space-borne visible-to-shortwave infrared (VSWIR) imaging spectrometers that promise consistent global observations of ecosystem function, phenology, and inter- and intra-annual change. However, the full value of repeat spectroscopy, the information embedded within different temporal scales, and the reliability of existing algorithms across diverse ecosystem types and vegetation phenophases have remained elusive due to the absence of suitable sub-seasonal spectroscopy data. In response, the Surface Biology and Geology (SBG) High-Frequency Time Series (SHIFT) campaign was initiated during late February 2022 in Santa Barbara County, California. SHIFT, designed to support NASA's SBG mission, addressed mission scoping, scientific advancement, applications development, and community building. This ambitious endeavor included weekly Airborne Visible InfraRed Imaging Spectrometer-Next Generation (AVIRIS-NG) imagery acquisitions for 13 weeks (spanning February 24 to May 29, 2022), accompanied by coordinated terrestrial vegetation and coastal aquatic data collection. We describe the rich datasets collected and illustrate how the complex sub-seasonal patterns of change can be linked to biological science and applications, surpassing insights from multispectral observations. Leveraging open-source processing methods and cloud-based analysis tools, the SHIFT campaign showcases the readiness of the scientific community to harness ecological insights from remotely sensed hyperspectral time series. We provide an overview of SHIFT's goals, data collections, preliminary results, and the collaborative efforts of early career scientists committed to unlocking the transformative potential of high-frequency time series data from space-borne VSWIR imaging spectrometers.

Ecosphere↗
USGS2023

Stratigraphic notes—Volume 1, 2022

This is the first volume in the U.S. Geological Survey (USGS) series of reports on stratigraphy entitled “Stratigraphic Notes,” which consists of short papers that highlight stratigraphic studies, changes in stratigraphic nomenclature, and explanations of stratigraphic names and concepts used on published geologic maps. “Stratigraphic Notes” is a long-term (multiyear), multivolume publication containing articles that address updates or revisions to stratigraphic nomenclature (and whose content ultimately will be incorporated by National Geologic Map Database personnel into Geolex, https://ngmdb.usgs.gov/Geolex/ ). We welcome papers for the “Stratigraphic Notes” series from geoscientists of the USGS, of State Geological Surveys, and from academicians. Papers can be submitted for publication in “Stratigraphic Notes” by contacting the USGS Geologic Names Committee ( gnc@usgs.gov ). As new “Stratigraphic Notes” volumes are published, links to the volumes will be posted at https://doi.org/10.3133/pp1879 . This first volume ("Stratigraphic notes—Volume 1, 2022") includes articles that provide guidance for those who wish to submit papers to “Stratigraphic Notes,” as well as information on how to make your manuscripts compliant for geologic names reviews and how to organize your paper’s content to facilitate inclusion of new or revised names in Geolex. This volume also includes some specific guidance on conducting geologic names reviews of geologic and hydrogeologic reports.

Professional Paper↗
USGS2025

Groundwater-storage change in the north Phoenix aquifer, Arizona, 2020–23

The city of Phoenix, Arizona, relies primarily on surface water for municipal water supply. The city also maintains wells to withdraw groundwater, particularly in times of drought and reduced surface-water supply, and to recharge groundwater when excess surface water is available. As of 2023, withdrawals from the aquifer in the northeastern part of the city are a small volume of water, less than 3,000 acre-feet in most years. Each year a similar volume of water is recharged through injection wells. The withdrawal wells are permitted to produce in total more than 20,000 acre-feet per year; increased pumping could lead to future groundwater-storage declines. To better understand groundwater-storage change in the north Phoenix aquifer, a repeat microgravity monitoring network was established in 2020. Measurements of changes in Earth’s gravity provide a direct, non-invasive measurement of subsurface mass change. Groundwater-storage changes were small during the 2020–23 study period, consistent with the relatively small volumes of pumping and recharge. Groundwater levels measured in monitoring wells were stable or increased slightly during this period, although the number of monitoring wells within the area of the gravity monitoring network is sparse. In total, about 15,000 acre-feet of water were pumped and 31,000 acre-feet recharged through injection in the north Phoenix aquifer during the 2020–22 period. Within the monitored area, groundwater storage increased by a small amount, about 1,000 acre-feet, in 2020, and decreased by a larger amount, about 6,000 acre-feet, each year in 2021 and 2022. Storage decreased at 89 of 102 stations from 2020 to 2023. Groundwater-storage decreases greater than the volume of net pumping indicate down-gradient subflow from the aquifer is greater than recharge plus incoming subflow, drying of the unsaturated zone resulting from decreased land-surface recharge, or both. At present (2023), the aquifer appears able to store and supply the relatively small amounts of water needed without excessive drawdown or harmful effects, such as land subsidence and surface inundation. If pumping or recharge increases in the future, the established repeat microgravity network is well suited to capture the spatial extent and magnitude of groundwater-storage changes in the aquifer.

Arizona↗
USGS2025

Fiber-imaged supershear dynamics in the 2024 Mw 7 Mendocino Fault earthquake

Fault structure and rupture physics are deeply intertwined, and observations of this coupling are critical for understanding earthquake behavior. Rupture propagation is observable at fine scales using dense seismic networks. Fiber-optic sensing allows for long-term deployments of ultradense arrays that enable high-resolution measurements of infrequent, large earthquakes. We recorded the 2024 moment magnitude ( M w ) 7 Mendocino Fault earthquake with a nearby fiber-optic array and imaged its behavior with seismic beamforming. The rupture propagated to the east at subshear velocity; stagnated near the Mendocino Triple Junction, a zone of structural complexity; and subsequently transitioned to supershear velocity. The correlation between source physics and structure shows how lithospheric heterogeneity affects first-order characteristics of earthquake ruptures. Our results also demonstrate the potential for fiber-optic sensing to improve real-time estimation of key parameters for early warning.

California↗
USGS1986

Potential for leakage among principal aquifers in the Memphis area, Tennessee

The principal aquifers in the Memphis area consist primarily of sand or sand and gravel, and the confining beds consist of clay, silt, sand, and lignite. The Jackson Formation and upper part of the Claiborne Group serve as the confining bed separating the water table aquifers from the Memphis Sand; the Flour Island Formation separates the Memphis Sand from the Fort Pillow Sand. Differences in total hydraulic head among the principal aquifers in the Memphis urban area result in vertical hydraulic gradients which create a potential for inter-aquifer exchange of water. Throughout this area, the gradient is downward from the water table aquifers to the Memphis Sand. In the central part of the Memphis urban area, the vertical hydraulic gradient is upward from the Fort Pillow Sand to the Memphis Sand, and in the eastern and western parts, it is downward from the Memphis Sand to the Fort Pillow Sand. The vertical distribution of carbon-14 data for water from the fluvial deposits, Memphis Sand, and Fort Pillow Sand shows an increase in the relative age of the water with depth. The areal distribution of carbon-14 data for water from the upper part of the Memphis Sand indicates that relatively recent water has been brought into the major cone of depression in the potentiometric surface of the Memphis Sand, either by horizontal movement or from downward vertical leakage. The normal, near-surface geothermal gradient in the Memphis area was determined to be 0.6 C/100 ft. Deviations from the normal geothermal gradient, in areas affected by intense pumping from the Memphis Sand, indicate that downward vertical leakage occurs from the water table aquifers through the Jackson-upper Claiborne confining bed to the Memphis Sand. The velocity of downward vertical leakage of water from the Memphis Sand through the Flour Island confining bed to the Fort Pillow Sand was determined to be 0.0066 ft/day by analysis of borehole temperature data from an observation well in the northeastern part of the Memphis area. From this velocity and the head difference between the Memphis Sand and the Fort Pillow Sand at this locality, the hydraulic conductivity of the Flour Island confining bed was determined to be 0.00114 ft/day. (Lantz-PTT)

Tennessee↗
USGS2025

To heal or not to heal?: 1. The effect of pore fluid pressure on the frictional healing behavior of lithologies in Oklahoma

The competition between fault healing (i.e., re-strengthening) and fault loading determines the timing and magnitude of fault failure within the seismic cycle. Repeating earthquakes can give observational estimates of fault healing rates, however, it is difficult to link laboratory studies of frictional healing and observed healing rates from repeating earthquakes in part because of uncertainty in lithology at depth. Due to well-constrained and relatively simple geology, earthquakes in Oklahoma can be linked to the granitic basement rock and to the Arbuckle Group, which is primarily composed of dolomite at earthquake depths. Here, we conduct friction experiments to measure healing rates of the two earthquake-bearing lithologies at confining pressures representative of earthquake depths and pore pressures ranging from 0% to 80% of the confining pressure. We measure frictional healing by executing slide-hold-slide tests with hold times ranging from 3 s to 3000 s. The friction experiments on the Troy Granite indicate that pore fluid pressure does not greatly affect healing rate. On the other hand, the dolomite of the Arbuckle Group exhibits decreased healing with increased pore fluid pressure, with weakening at the highest pore pressure. We hypothesize that this is due to an increase in dissolution of dolomite at high pore pressures/low effective normal stress. These healing rates are used in the companion paper to understand the moment-recurrence time behavior of repeating earthquakes in Prague, Oklahoma. This work has implications for possible enhanced dissolution and weakening behavior of the Arbuckle Group during wastewater injection activities.

Oklahoma↗
USGS2025

Characterizing sedimentary organic carbon in a hydrothermal spreading center, the Escanaba Trough

Sediments in critical marine mineral environments are of wide importance due to their preservation of both marine minerals and organic carbon (OC) stocks. However, OC storage and cycling is often overlooked in mineral system studies. This work characterizes sedimentary OC within the Escanaba Trough, a hydrothermal sulfide system off the coast of northern California. By utilizing ROV-based push coring, we collected sediments near and far from high temperature, low temperature, and inactive vents. We applied a multipronged organic geochemical approach, measuring bulk sediment, OC fractions of varying labilities, and biomarkers to tease apart the storage, source, and cycling of OC within this complex system. In contrast to past work indicating a primarily terrestrial source to deeper, Pleistocene sediments, our results suggest a primarily marine source in surface sediments at least 50 m away from active venting. Near active venting, we see evidence of locally produced chemosynthetic OC in addition to the background marine source. This chemosynthetic OC appears to be rapidly remineralized and supports more complex deep-sea food webs compared to hemipelagic sites. Still, the greatest contribution of labile OC was observed at inactive vent sites, which we suggest is due to hydrothermal fluid alteration of more labile OC at actively venting sites. Depending on fluid temperature, hydrothermally altered OC is either preserved in the sediments as petroleum or migrated with fluid flow. Considering inactive sites are those most likely to be targeted by potential mining, we suggest additional studies could verify if these results apply at other sedimented seafloor massive sulfide systems.

California↗
USGS2026

Thermal detectability of subsurface water ice on Mars: A comparative analysis for the Subsurface Water Ice Mapping (SWIM) Project

We have developed a new global map of shallow ground ice distribution, SWIM23, based on Mars Global Surveyor Thermal Emission Spectrometer data and made systematic comparisons between this new map and two similar, previously developed data products. We have explored the origin of differences between the three ice maps by detailing technical and procedural differences in their development, by making global pixel-by-pixel comparisons, and by carrying out a series of one-dimensional thermal simulations to explore fundamental physical limitations of thermal ice-detection techniques. These efforts and the production of a composite thermal ice-consistency map supported integration of multiple geophysical data products relevant to ice detection in the upper meter of the Martian regolith into the larger Mars Subsurface Water Ice Mapping project. Our work also highlights fundamental physical limitations to thermal ice detection as a technique, particularly the rapid fall-off in ice detection sensitivity at depths >30 cm, which produces maximum uncertainty in the presence and depth of ice within regions preferred for potential human landing sites. A future Mars orbiter mission designed to detect ice and support crewed landing site selection in the midlatitude region should give payload priority to an instrument capable of probing the 1–5 m depth range (i.e., a high-frequency radar), over a next-generation thermal spectrometer, which is unlikely to offer clarity on ice table depths or lateral continuity of the ice table in the locations of highest interest.

Planetary Science Journal↗
USGS2026

Subsurface water ice mapping on Mars: A probabilistic approach

Subsurface water ice deposits on Mars are an important resource for potential future human exploration. They are also an indicator of the planet’s past climate. However, the distribution of subsurface water ice in Mars’s midlatitudes is uncertain because spacecraft imagery cannot directly observe subsurface ice in most cases. Various spacecraft remote sensing instruments are sensitive to subsurface water ice, including thermal imaging spectrometers, radar sounders, and neutron spectrometers. Geomorphic analyses of images can also implicate subsurface ice. Building upon the data products from the Mars Subsurface Water Ice Mapping project, we provide a probabilistic framework to jointly interpret existing data and estimate the likelihood of subsurface water ice in the Martian midlatitudes between 60 ∘ S and 60 ∘ N with uncertainty. Broadly, we find that near-surface ice is likely present poleward of ∼45 ∘ in both the northern and southern hemispheres. However, closer to the equator, existing remote sensing data cannot uniquely constrain the presence of subsurface water ice. Our probabilistic results provide a framework for quantifying the abundance of ice on Mars, and our uncertainty estimates allow future analysis and exploration to target regions of high uncertainty.

Planetary Science Journal↗
USGS1995

The distribution of bromide in water in the Floridan aquifer system, Duval County, northeastern Florida

Although Duval County, Florida, has ample ground-water resources for public supply, the potential exists for a problem with excessive disinfectant by-products. These disinfectant by-products result from the treatment of raw water containing low concentrations of bromide and naturally occurring organic compounds. Because of this potential problem, the relation of bromide concentrations to aquifer tapped, well location and depth, and chemical characteristics of water in the Floridan aquifer system underlying Duval County were studied to determine if these relations could be applied to delineate water with low-bromide concentrations for future supplies. In 1992, water samples from 106 wells that tap the Floridan aquifer system were analyzed for bromide and major dissolved constituents. A comparison of bromide concentrations from the 1992 sampling with data from earlier studies (1979-80) indicates that higher bromide concentrations were detected during the earlier studies. The difference between the old and new data is probably because of a change in analytical methodology in the analysis of samples. Bromide concentrations exceeded the detection limit (0.10 milligrams per liter) in water from 28 of the 106 wells (26 percent) sampled in 1992. The maximum concentration was 0.56 milligrams per liter. There were no relations between bromide and major dissolved constituents, well depth, or aquifer tapped that would be useful for determining bromide concentrations. Areal patterns of bromide occurrence are not clearly defined, but areas with relatively high bromide concentrations tend to be located in a triangular area near the community of Sunbeam, Florida, and along the St. Johns River throughout Duval County.

Florida↗
USGS2025

Persistent deep long-period seismicity near the Lassen Volcanic Center

Deep long-period (DLP) earthquakes have been observed at many volcanic settings around the world and linked to the magmatic processes that drive volcanic unrest. At the Lassen Volcanic Center (LVC) of the Cascade arc, limited detection of DLP activity hinders classification of anomalous seismic behavior and its relationship to the LVC magmatic system. This study uses a template matching approach with seismic data from temporary nodal and permanent stations to detect and locate DLP earthquakes near the LVC between 2017 and 2024. Within the DLP catalog of 611 events, a transition occurs from scattered (2017–2020) to oscillatory (2021–2024) occurrence rates. During the oscillatory period, regional earthquakes with large amplitude velocity waveforms observed near the LVC are associated with abrupt changes in DLP occurrence rates. Continued monitoring of DLP activity has the potential to better define the processes that drive volcanic unrest at the LVC in the future.

California↗