Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Coastal Sediments”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87Linked to original sources
USGS2003

Conceptual model for transferring information between small watersheds

Stream and watershed management and restoration can be greatly facilitated through use of physiographic landform classification to organize and communicate natural resource, hazard, and environmental information at a broad scale (1:250,000) as illustrated by the Piedmont and Coastal Plain Provinces in Maryland, or at a small scale (1:24,000) as illustrated using divisions and zones combined with a conceptual model. The conceptual model brings together geology, surficial processes, landforms and land use change information at the small watershed scale and facilitates transfer of information from one small watershed to another with similar geology and landforms. Stream flow, sediment erosion, and water quality illustrate the use of the model.

Environmental Geology↗
USGS2016

Isotopic composition of inorganic mercury and methylmercury downstream of a historical gold mining region

We measured total mercury (THg) and monomethyl mercury (MMHg) concentrations and mercury (Hg) isotopic compositions in sediment and aquatic organisms from the Yuba River (California, USA) to identify Hg sources and biogeochemical transformations downstream of a historical gold mining region. Sediment THg concentrations and δ 202 Hg decreased from the upper Yuba Fan to the lower Yuba Fan and the Feather River. These results are consistent with the release of Hg during gold mining followed by downstream mixing and dilution. The Hg isotopic composition of Yuba Fan sediment (δ 202 Hg = −0.38 ± 0.17‰ and Δ 199 Hg = 0.04 ± 0.03‰; mean ± 1 SD, n = 7) provides a fingerprint of inorganic Hg (IHg) that could be methylated locally or after transport downstream. The isotopic composition of MMHg in the Yuba River food web was estimated using biota with a range of %MMHg (the percent of THg present as MMHg) and compared to IHg in sediment, algae, and the food web. The estimated δ 202 Hg of MMHg prior to photodegradation (−1.29 to −1.07‰) was lower than that of IHg and we suggest this is due to mass-dependent fractionation (MDF) of up to −0.9‰ between IHg and MMHg. This result is in contrast to net positive MDF (+0.4 to +0.8‰) previously observed in lakes, estuaries, coastal oceans, and forests. We hypothesize that this unique relationship could be due to differences in the extent or pathway of biotic MMHg degradation in stream environments.

California↗
USGS1986

The Conterminous United States Mineral Assessment Program; background information to accompany folio of geologic, geophysical, geochemical, mineral-occurrence, mineral-resource potential, and mineral-production maps of the Charlotte 1 degree x 2 degrees Quadrangle, North Carolina and South Carolina

This Circular and the folio of separately published maps described herein are part of a series of reports compiled under the Conterminous United States Mineral Assessment Program ICUSMAP). The folio on the Charlotte 1 degree ? 2 degree quadrangle, North Carolina and South Carolina, includes (1) a geologic map; (2) four geophysical maps; (3) geochemical maps for metamorphic heavy minerals, copper, lead and artifacts, zinc, gold, tin, beryllium, niobium, tungsten, molybdenum, titanium, cobalt, lithium, barium, antimony-arsenic-bismuth-cadmium, thorium-cerium-monazite, and limonite; (4) mineral-occurrence maps for kyanite-sillimanite-lithium-mica-feldspar-copper-lead-zinc, gold-quartz-barite-fluorite, iron-thorium-tin-niobium, and construction materials-gemstones; (5) mineral-resource potential maps for copper-lead-zinc-combined base metals, gold, tin-tungsten, beryllium-molybdenum-niobium, lithium-kyanite- sillimanitebarite, thorium (monazite)-uranium, and construction materials; and (6) mineral-production maps. The Charlotte quadrangle is mainly within the Piedmont physiographic province and extends from near the Coastal Plain on the southeast into the Blue Ridge province on the northwest for a short distance. Parts of six lithotectonic belts are present--the Blue Ridge, the Inner Piedmont, the Kings Mountain belt, the Charlotte belt, the Carolina slate belt, and the Wadesboro basin. Igneous, metamorphic, and sedimentary rocks are present and range in age from Proterozoic to Mesozoic; alluvial sediments of Quaternary age occur along rivers and larger streams. Rocks of the Blue Ridge include Middle Proterozoic granitoid gneiss intruded by Late Proterozoic granite; Late Proterozoic paragneiss, schist, and other metasedimentary and metavolcaniclastic rocks (Ashe and Grandfather Mountain Formations); Late Proterozoic and Early Cambrian metasedimentary rocks (Chilhowee Group); and Early Cambrian sedimentary rocks (Shady Dolomite). Paleozoic granites intrude the Proterozoic rocks. The Inner Piedmont contains noncarbonate metasedimentary rocks and amphibolite of medium to high metamorphic grades. These rocks are intruded by the Toluca Granite and Henderson Gneiss of Cambrian and Ordovician(?) age. The Charlotte belt consists largely of Late Proterozoic to Late Paleozoic granitic and gabbroic plutonic rocks and intervening enclaves of metasedimentary and metavolcanic rocks. The narrow Kings Mountain belt is located between the Charlotte and the Inner Piedmont belts and contains mainly Late Proterozoic metasedimentary rocks and plutonic rocks similar to those of the Charlotte belt. The Carolina slate belt, flanking the Charlotte belt on the east, contains weakly metamorphosed volcanic and sedimentary rocks. East of this belt, at the southeast corner of the quadrangle, is the Wadesboro basin, which has continental sedimentary rocks of Triassic age. Layered rocks westward from and in the Charlotte belt are complexly folded, are steeply dipping, and in the Blue Ridge and Inner Piedmont are contained within major thrust slices. Rocks of the Carolina slate belt are gently folded. Rocks of the Wadesboro basin occur in downfaulted blocks. The geophysical surveys of the Charlotte quadrangle consisted of Bouguer gravity, aeromagnetic, and aeroradioactivity surveys and used both newly obtained data and information from prior work. The gravity survey disclosed a distinct northeast-trending, northwest-decreasing gradient, which is part of the major gravity gradient that extends the length of the Appalachian Mountains. Granitic plutons of the Charlotte belt, in particular, are marked by gravity lows, and gabbro plutons, by highs. Several of the geologic belts display distinct magnetic character. The aeroradioactivity surveys showed a swath of consistently high gamma-ray intensities along the central part of the Inner Piedmont belt; these high intensities correspond to the so-called monazite belt. Oval patterns of high gamma-ray readi

Circular↗
USGS2006

Varieties of submarine failure morphologies of seismically-induced landslides in Alaskan fjords

The Great Alaska Earthquake of 1964 caused major damage and 43 deaths in the coastal communities of Seward and Valdez. Most of these losses were caused by tsunamis that occurred immediately after the earthquake and were most likely induced by local submarine landslides. Recent NOAA multibcam bathymetric surveys near Seward and Valdez provide detailed information about the morphology of landslide deposits in both areas. High-resolution (chirp) surveys were conducted by the USGS, and sediment samples were taken over apparent landslide debris. Landslide deposits near Seward typically take the form of a series of large and small blocks lying directly off the front of the town, although there are indications of sandy and muddy debris flows occurring off river deltas. Near Valdez, landslide morphologies include at least three forms: a field of large blocks (up to 40 m high), an intricate series of gullies, channels, and talus near the fjord-head delta and a broad debris lobe that apparently flowed half-way down the fjord and stopped. The 1964 landslide tsunamis may have been composites resulting from a number of landslide events.

Conference Paper↗
USGS2004

Facies analysis and sequence stratigraphic framework of upper Campanian strata (Neslen and Mount Garfield formations, Bluecastle Tongue of the Castlegate Sandstone, and Mancos Shale), Eastern Book Cliffs, Colorado and Utah

Facies and sequence-stratigraphic analysis identifies six high-resolution sequences within upper Campanian strata across about 120 miles of the Book Cliffs in western Colorado and eastern Utah. The six sequences are named after prominent sandstone units and include, in ascending order, upper Sego sequence, Neslen sequence, Corcoran sequence, Buck Canyon/lower Cozzette sequence, upper Cozzette sequence, and Cozzette/Rollins sequence. A seventh sequence, the Bluecastle sequence, is present in the extreme western part of the study area. Facies analysis documents deepening- and shallowing- upward successions, parasequence stacking patterns, downlap in subsurface cross sections, facies dislocations, basinward shifts in facies, and truncation of strata.All six sequences display major incision into shoreface deposits of the Sego Sandstone and sandstones of the Corcoran and Cozzette Members of the Mount Garfield Formation. The incised surfaces represent sequence-boundary unconformities that allowed bypass of sediment to lowstand shorelines that are either attached to the older highstand shorelines or are detached from the older highstand shorelines and located southeast of the main study area. The sequence boundary unconformities represent valley incisions that were cut during successive lowstands of relative sea level. The overlying valley-fill deposits generally consist of tidally influenced strata deposited during an overall base level rise. Transgressive surfaces can be traced or projected over, or locally into, estuarine deposits above and landward of their associated shoreface deposits. Maximum flooding surfaces can be traced or projected landward from offshore strata into, or above, coastal-plain deposits. With the exception of the Cozzette/Rollins sequence, the majority of coal-bearing coastal-plain strata was deposited before maximum flooding and is therefore within the transgressive systems tracts. Maximum flooding was followed by strong progradation of parasequences and low preservation potential of coastal-plain strata within the highstand systems tract. The large incised valleys, lack of transgressive retrogradational parasequences, strong progradational nature of highstand parasequences, and low preservation of coastal-plain strata in the highstand systems tracts argue for relatively low accommodation space during deposition of the Sego, Corcoran, and Cozzette sequences. The Buck Canyon/Cozzette and Cozzette/Rollins sequences contrast with other sequences in that the preservation of retrogradational parasequences and the development of large estuaries coincident with maximum flooding indicate a relative increase in accommodation space during deposition of these strata. Following maximum flooding, the Buck Canyon/Cozzette sequence follows the pattern of the other sequences, but the Cozzette/Rollins sequence exhibits a contrasting offlapping pattern with development of offshore clinoforms that downlap and eventually parallel its maximum flooding surface. This highstand systems tract preserves a thick coal-bearing section where the Rollins Sandstone Member of the Mount Garfield Formation parasequences prograde out of the study area, stepping up as much as 800 ft stratigraphically over a distance of about 90 miles. This progradational stacking pattern indicates a higher accommodation space and increased sedimentation rate compared to the previous sequences.

Colorado, Utah↗
USGS1995

Diatom evidence for earthquake-induced subsidence and tsunami 300 yr ago in southern coastal Washington

Fossil diatoms from four stratigraphic sections along the tidal Niawiakum River, southwestern Washington, provide an independent paleoecological test of a relative sea-level rise that has been attributed to subsidence during an inferred earthquake in the Cascadia subduction zone about 300 yr ago. Diatom assemblages in a buried soil and overlying mud indicate a sudden and lasting shift from marshes and forests near or above highest tides to mud flats and incipient tidal marshes, with a progressive return to high-level tidal marshes by sediment aggradation and, perhaps, gradual tectonic uplift. The amount of coseismic submergence required to generate the paleoecological changes observed at these sites could have ranged from a minimum of 0.8–1.0 m to a maximum of ∼3.0 m. Fossil diatoms also provide an independent test of previous inferences that the subsidence was shortly followed by a tsunami. The inferred tsunami deposit is a distinct sandy interval that widely overlies the buried marsh and forest soil. Diatoms from this interval consist of species observed on modern sand flats of the open bay, identifying a bayward source for the sand. Occurrences of the same sand-flat species above the buried soil in the farthest up-valley outcrop where a sandy interval is not recognizable suggest that the tsunami extended farther landward than was previously inferred from the stratigraphy. These data rule out proposed alternatives to the coseismic subsidence model—that is, climatically induced sea-level rise, temporary submergence caused by storms—and support the hypothesis that a great earthquake struck southwestern Washington 300 yr ago.

Geological Society of America Bulletin↗
USGS1996

Uranium provinces of North America — Their definition, distribution, and models

Uranium resources in North America are principally in unconformity-related, quartz-pebble conglomerate, sandstone, volcanic, and phosphorite types of uranium deposits. Most are concentrated in separate, well-defined metallogenic provinces. Proterozoic quartz-pebble conglomerate and unconformity-related deposits are, respectively, in the Blind River–Elliot Lake (BRELUP) and the Athabasca Basin (ABUP) Uranium Provinces in Canada. Sandstone uranium deposits are of two principal subtypes, tabular and roll-front. Tabular sandstone uranium deposits are mainly in upper Paleozoic and Mesozoic rocks in the Colorado Plateau Uranium Province (CPUP). Roll-front sandstone uranium deposits are in Tertiary rocks of the Rocky Mountain and Intermontane Basins Uranium Province (RMIBUP), and in a narrow belt of Tertiary rocks that form the Gulf Coastal Uranium Province (GCUP) in south Texas and adjacent Mexico. Volcanic uranium deposits are concentrated in the Basin and Range Uranium Province (BRUP) stretching from the McDermitt caldera at the Oregon-Nevada border through the Marysvale district of Utah and Date Creek Basin in Arizona and south into the Sierra de Peña Blanca District, Chihuahua, Mexico. Uraniferous phosphorite occurs in Tertiary sediments in Florida, Georgia, and North and South Carolina and in the Lower Permian Phosphoria Formation in Idaho and adjacent States, but only in Florida has economic recovery been successful. The Florida Phosphorite Uranium Province (FPUP) has yielded large quantities of uranium as a byproduct of the production of phosphoric acid fertilizer. Economically recoverable quantities of copper, gold, molybdenum, nickel, silver, thorium, and vanadium occur with the uranium deposits in some provinces. Many major epochs of uranium mineralization occurred in North America. In the BRELUP, uranium minerals were concentrated in placers during the Early Proterozoic (2,500–2,250 Ma). In the ABUP, the unconformity-related deposits were most likely formed initially by hot saline formational water related to diagenesis (»1,400 to 1,330 Ma) and later reconcentrated by hydrothermal events at »1,280–»1,000, »575, and »225 Ma. Subsequently in North America, only minor uranium mineralization occurred until after continental collision in Permian time (255 Ma). Three principal epochs of uranium mineralization occurred in the CPUP: (1) » 210–200 Ma, shortly after Late Triassic sedimentation; (2) »155–150 Ma, in Late Jurassic time; and (3) » 135 Ma, after sedimentation of the Upper Jurassic Morrison Formation. The most likely source of the uranium was silicic volcaniclastics for the three epochs derived from a volcanic island arc at the west edge of the North American continent. Uranium mineralization occurred during Eocene, Miocene, and Pliocene times in the RMIBUP, GCUP, and BRUP. Volcanic activity took place near the west edge of the continent during and shortly after sedimentation of the host rocks in these three provinces. Some volcanic centers in the Sierra de Peña Blanca district within the BRUP may have provided uranium-rich ash to host rocks in the GCUP. Most of the uranium provinces in North America appear to have a common theme of close associations to volcanic activity related to the development of the western margin of the North American plate. The south and west margin of the Canadian Shield formed the leading edge of the progress of uranium source development and mineralization from the Proterozoic to the present. The development of favorable hosts and sources of uranium is related to various tectonic elements developed over time. Periods of major uranium mineralization in North America were Early Proterozoic, Middle Proterozoic, Late Triassic–Early Jurassic, Early Cretaceous, Oligocene, and Miocene. Tertiary mineralization was the most pervasive, covering most of Western and Southern North America.

Bulletin↗
USGS2004

Data files from the Grays Harbor Sediment Transport Experiment Spring 2001

This publication consists of two DVD-ROMs, both of which are presented here. This report describes data collected during the Spring 2001 Grays Harbor Sediment Transport Experiment, and provides additional information needed to interpret the data. Two DVDs accompany this report; both contain documentation in html format that assist the user in navigating through the data. DVD-ROM-1 contains a digital version of this report in .pdf format, raw Aquatec acoustic backscatter (ABS) data in .zip format, Sonar data files in .avi format, and coastal processes and morphology data in ASCII format. ASCII data files are provided in .zip format; bundled coastal processes ASCII files are separated by deployment and instrument; bundled morphology ASCII files are separated into monthly data collection efforts containing the beach profiles collected (or extracted from the surface map) at that time; weekly surface maps are also bundled together. DVD-ROM-2 contains a digital version of this report in .pdf format, the binary data files collected by the SonTek instrumentation, calibration files for the pressure sensors, and Matlab m-files for loading the ABS data into Matlab and cleaning-up the optical backscatter (OBS) burst time-series data.

Washington↗
USGS2009

National assessment of historical shoreline change: a pilot study of historical coastal bluff retreat in the Great Lakes, Erie, Pennsylvania

Coastal bluff retreat is a chronic problem along many high-relief coastlines in the United States. As coastal populations continue to grow and community infrastructures are threatened by erosion, there is increased demand for accurate information regard-ing trends and rates of bluff retreat. There is also a need for a comprehensive analysis that is consistent from one coastal region to another. To address these national needs, the U.S. Geological Survey (USGS), as part of the National Assessment of Coastal Change Hazards Project, conducted a pilot study of bluff retreat along the Lake Erie, Pa., coastline to assess the feasibility of undertaking a larger, multi-state analysis in the Great Lakes region. This report provides an overview of the pilot-study location and bluff geomorphology, the data sources and methodology, results of the analysis, and a discussion of the feasibility of undertaking a similar analysis along eroding bluffs in other Great Lakes states. This pilot study is part of an ongoing effort by the USGS to provide a comprehensive analysis of historical shoreline change and cliff and bluff retreat along open-ocean coastlines of the conterminous United States and parts of Hawaii, Alaska, and the Great Lakes. One purpose of the work is to develop standard, repeatable methods for mapping and analyzing coastal change so that systematic and consistent periodic updates of coastal erosion can be made nationally. Bluff-retreat evaluations are conducted by comparing the location of a historical bluff edge digitized from aerial photographs with those of recent bluff edges interpreted from both aerial photographs and lidar topographic surveys. The historical bluff edge is from 1938, whereas the more recent bluff edges are from 1998 and 2006 lidar data. Long-term (68-year) rates of retreat are calculated using the available bluff-edge data. The rates of retreat presented in this report represent conditions from the 1930s to 1998/2006, and are not intended for predicting future bluff-edge positions or rates of retreat. The report presents bluff-retreat rates for 32 km of a 60-km stretch along the Lake Erie, Pa., coastline. Data are discontinuous due to gaps in source data and lack of continuous bluffs. The average rate of coastal bluff retreat for the Lake Erie, Pa., bluffs was -0.3 +- 0.1 m/yr (retreat rates are presented as negative numbers in this report), based on rates averaged from 1,595 individual transects. Retreat rates generally were lowest where bedrock outcrops are exposed as the basal unit in the bluff. The highest rates are associated with anthropogenic activities, including jetties that trap littoral sediment, depleting a source of material for the natural replenishment of protective beaches downcoast, and extensive irrigation of farmlands on the tops of the bluffs, which can destabilize bluffs by enhancing ground-water outflow.

Pennsylvania↗
USGS2020

Application of decadal modeling approach to forecast barrier island evolution, Dauphin Island, Alabama

Forecasting barrier island evolution provides coastal managers and stakeholders the ability to assess the resiliency of these important coastal environments that are home to both established communities and existing natural habitats. This study uses an established coupled model framework to assess how Dauphin Island, Alabama, responds to various storm and sea-level change scenarios, along with a suite of restoration measures, over the course of a decade. The coupled model framework uses validated models for long-term alongshore sediment transport (Delft 3D), short-term storm induced impacts (XBeach), as well as dune building and recovery (empirical dune growth model). This model framework was simulated with the various storm and sea-level change scenarios on a non-restored Dauphin Island, then a subset of the storm and sea-level change scenarios were applied to a suite of seven different restoration measures to determine how they would influence the morphologic evolution over a decadal period. Topographic and bathymetric changes captured in post-simulation digital elevation models were then passed on to partners for various simulations to determine the effects on habitat evolution and water quality as it relates to oyster reef and submerged aquatic vegetation.

Alabama↗
USGS2021

Enhancing marsh elevation using sediment augmentation: A case study from southern California, USA

Tidal marshes are an important component of estuaries that provide habitat for fish and wildlife, protection from flooding, recreation opportunities, and can improve water quality. Critical to maintaining these functions is vertical accretion, a key mechanism by which tidal marshes build elevation relative to local sea level. The beneficial use of dredged material to build marsh elevations in response to accelerating sea level rise has gained attention as a management action to prevent habitat loss over the coming decades. In January 2016, a sediment augmentation project using local dredged material was undertaken at Seal Beach National Wildlife Refuge in Anaheim Bay, California, USA, to benefit tidal marsh habitat and the listed species it supports. The application process added 12,900 cubic meters of sediment with an initial, average 22-cm gain in elevation over a 3.2-hectare site. Due to sediment characteristics and higher than anticipated elevations in some areas, vegetation colonization did not occur at the expected rate; therefore, adaptive management measures were undertaken to improve hydrology of the site and facilitate vegetation colonization. More case studies that test and monitor sea level adaptation actions are needed to assist in the planning and implementation of climate-resilient projects to prevent coastal habitat loss over the coming century.

California↗
USGS2014

Archive of digital chirp subbottom profile data collected during USGS cruise 12BIM03 offshore of the Chandeleur Islands, Louisiana, July 2012

From July 23 - 31, 2012, the U.S. Geological Survey conducted geophysical surveys to investigate the geologic controls on barrier island framework and long-term sediment transport along the oil spill mitigation sand berm constructed at the north end and just offshore of the Chandeleur Islands, La. (figure 1). This effort is part of a broader USGS study, which seeks to better understand barrier island evolution over medium time scales (months to years). This report serves as an archive of unprocessed digital chirp subbottom data, trackline maps, navigation files, Geographic Information System (GIS) files, Field Activity Collection System (FACS) logs, and formal Federal Geographic Data Committee (FGDC) metadata. Gained (showing a relative increase in signal amplitude) digital images of the seismic profiles are also provided. Refer to the Abbreviations page for expansions of acronyms and abbreviations used in this report. The USGS St. Petersburg Coastal and Marine Science Center (SPCMSC) assigns a unique identifier to each cruise or field activity. For example, 12BIM03 tells us the data were collected in 2012 during the third field activity for that project in that calendar year and BIM is a generic code, which represents efforts related to Barrier Island Mapping. Refer to http://walrus.wr.usgs.gov/infobank/programs/html/definition/activity.html for a detailed description of the method used to assign the field activity ID. All chirp systems use a signal of continuously varying frequency; the EdgeTech SB-424 system used during this survey produces high-resolution, shallow-penetration (typically less than 50 milliseconds (ms)) profile images of sub-seafloor stratigraphy. The towfish contains a transducer that transmits and receives acoustic energy and is typically towed 1 - 2 m below the sea surface. As transmitted acoustic energy intersects density boundaries, such as the seafloor or sub-surface sediment layers, energy is reflected back toward the transducer, received, and recorded by a PC-based seismic acquisition system. This process is repeated at regular time intervals (for example, 0.125 seconds (s)) and returned energy is recorded for a specific duration (for example, 50 ms). In this way, a two-dimensional (2-D) vertical image of the shallow geologic structure beneath the ship track is produced. Figure 2 displays the acquisition geometry. Refer to table 1 for a summary of acquisition parameters and table 2 for trackline statistics. The archived trace data are in standard Society of Exploration Geophysicists (SEG) SEG Y rev. 0 format (Barry and others, 1975); the first 3,200 bytes of the card image header are in ASCII format instead of EBCDIC format. The SEG Y files may be downloaded and processed with commercial or public domain software such as Seismic Unix (SU) (Cohen and Stockwell, 2010). See the How To Download SEG Y Data page for download instructions. The web version of this archive does not contain the SEG Y trace files. These files are very large and would require extremely long download times. To obtain the complete DVD archive, contact USGS Information Services at 1-888-ASK-USGS or infoservices@usgs.gov. The printable profiles provided here are GIF images that were processed and gained using SU software and can be viewed from the Profiles page or from links located on the trackline maps; refer to the Software page for links to example SU processing scripts. The SEG Y files are available on the DVD version of this report or on the Web, downloadable via the USGS Coastal and Marine Geoscience Data System (http://cmgds.marine.usgs.gov). The data are also available for viewing using GeoMapApp (http://www.geomapapp.org) and Virtual Ocean (http://www.virtualocean.org) multi-platform open source software. Detailed information about the navigation system used can be found in table 1 and the Field Activity Collection System (FACS) logs. To view the trackline maps and navigation files, and for more information about these items, see the Navigation page.

Louisiana↗
USGS2006

Overview of investigations into mercury in ground water, soils, and septage, New Jersey coastal plain

Since the early 1980s, investigations by health departments of eight counties in southern New Jersey, by the NJ Department of Environmental Protection (NJDEP), and subsequently by the US Geological Survey (USGS), have shown that Hg concentrations in water tapped by about 600 domestic wells exceed the maximum contaminant level (MCL) of 2 μg/L. The wells are finished in the areally extensive unconfined Kirkwood-Cohansey aquifer system of New Jersey's Coastal Plain; background concentrations of Hg in water from this system are < 0.01 μg/L. Evidence of contributions from point sources of Hg, such as landfills or commercial and industrial hazardous-waste sites, is lacking. During 1996–2003, the USGS collected water samples from 203 domestic, irrigation, observation, and production wells using ultraclean techniques; septage, leach-field effluent, soils, and aquifer sediments also were sampled. Elevated concentrations of NH 4 , B, Cl, NO 3 , and Na and presence of surfactants in domestic-well water indicate that septic-system effluent can affect water quality in unsewered residential areas, but neither septage nor effluent appears to be a major Hg source. Detections of hydrogen sulfide in ground water at a residential area indicate localized reducing conditions; undetectable SO 4 concentrations in water from other residential areas indicate that reducing conditions, which could be conducive to Hg methylation, may be common locally. Volatile organic compounds (VOCs), mostly chlorinated solvents, also are found in ground water at the affected areas, but statistically significant associations between presence of Hg and VOCs were absent for most areas evaluated. Hg concentrations are lower in some filtered water samples than in paired unfiltered samples, likely indicating that some Hg is associated with particles or colloids. The source of colloids may be soils, which, when undisturbed, contain higher concentrations of Hg than do disturbed soils and aquifer sediments. Soil disturbance during residential development and inputs from septic systems are hypothesized to mobilize Hg from soils to ground water.

New Jersey↗
USGS1987

Biogeochemical cycling in an organic-rich coastal marine basin. 7. Sulfur mass balance, oxygen uptake and sulfide retention

Sulfur and oxygen fluxes were quantified in the seasonally varying anoxic marine sedimentary system of Cape Lookout Bight, N.C., U.S.A. Over the three year study period, 1981–1983, the mean annual sulfate reduction rate was determined to be 18.2 ± 1.6 moles · m −2 · y −1 . This value, added to the estimate of the detrital sulfur input of 1.2 ± 4.4 gave a total sulfur input of 19.4 ± 4.7 moles · m −2 · y −1 . The sulfide flux to the sediment-water interface, measured in anaerobic benthic chambers was 4.6 ± 0.5 moles · m −2 · y −1 , and represented 37% of the annual oxygen uptake rate of 25.2 ± 2.8 moles · m −2 · y −1 . The sulfide burial rate, determined to be 15.5 ± 3.1 moles · m −2 · y −1 , was within 5% of the value predicted by summing the fluxes at the sediment-water interface. The C S "> CS weight ratio of sediment below the depth of diagenetic reaction was determined to be 2.75. The sulfide retention rate in these rapidly accumulating sediments (10 cm/yr) was 77 ± 19%. Comparison of this result with previous studies shows that rapid sediment accumulation and the lack of bioturbation control this unusually high degree of sulfide retention.

Geochimica et Cosmochimica Acta↗
USGS1989

Non-energy resources, Connecticut and Rhode Island coastal waters

Cores collected from Long Island Sound, Connecticut, were used to establish control on the geologic framework of the area. Lithologic and stratigraphic analyses verified the presence of the following units: (1) Cretaceous coastal plain, (2) Pleistocene glacial till, (3) late Pleistocene glacial lake, (4) late Pleistocene glacial outwash, and (5) Holocene fluvial, estuarine and marine deposits. Cores collected in Block Island Sound, Rhode Island, were obtained from inferred, relict shoreline features and were analyzed for heavy mineral content. Concentrations ranged from 0.3 to 3.4%; no significant downcore changes were found. The results indicated that surficial sediments in areas of high-velocity tidal flow yield greater amounts of heavy minerals than do inferred placer deposits. During the second phase of the program of study, Connecticut and Rhode Island pooled resources to develop a study plan for the comprehensive quantification of all non-energy resources in the adjacent waters of the states. A literature and data survey was conducted to assess the occurrence, extent, and accessibility of these resources. Sand and gravel and heavy minerals were found in concentrations offering potential for resource exploitation. Constraints on exploitation include (1) water depth restrictions for the protection of shellfish beds and public beaches, (2) fishing activities, (3) military, commercial, and fishing vessel traffic, (4) seafloor cable routes and (5) dump sites. Deposits composed of Pleistocene glacial sediments and/or Holocene marine sediments in regions of little or no user conflict were identified as sites potentially suitable for resource exploitation. The study plan stated additional data needs (geophysical profiling and vibracore sampling) at these sites. Subsequent to these recommendations, high-resolution seismic profiles and sidescan sonographs were obtained from these sites. Seismic stratigraphic analyses confirm the presence of extensive deposits of potential economic value.

Marine Geology↗
USGS1995

Uppermost Campanian–Maestrichtian strontium isotopic, biostratigraphic, and sequence stratigraphic framework of the New Jersey Coastal Plain

Firm stratigraphic correlations are needed to evaluate the global significance of unconformity bounded units (sequences). We correlate the well-developed uppermost Campanian and Maestrichtian sequences of the New Jersey Coastal Plain to the geomagnetic polarity time scale (GPTS) by integrating Sr-isotopic stratigraphy and biostratigraphy. To do this, we developed a Maestrichtian (ca. 73–65 Ma) Sr-isotopic reference section at Deep Sea Drilling Project Hole 525A in the southeastern Atlantic Ocean. Maestrichtian strata can then be dated by measuring their 87 Sr/ 86 Sr composition, calibrating to the GPTS of S. C. Cande and D. V. Kent (1993, personal commun.), and using the equation Age (Ma) = 37 326.894–52 639.89 ( 87 Sr/ 86 Sr). Sr-stratigraphic resolution for the Maestrichtian is estimated as ±1.2 to ±2 m.y. At least two unconformity-bounded units comprise the uppermost Campanian to Maestrichtian strata in New Jersey. The lower one, the Marshalltown sequence, is assigned to calcareous nannofossil Zones CC20/21 (∼NC19) and CC22b (∼NC20). It ranges in age from ∼74.1 to 69.9 Ma based on Sr-isotope age estimates. The overlying Navesink sequence is assigned to calcareous nannoplankton Zones CC25–26 (∼NC21–23); it ranges in age from 69.3 to 65 Ma based on Sr-isotope age estimates. The upper part of this sequence, the Tinton Formation, has no calcareous planktonic control; Sr-isotopes provide an age estimate of 66 ± 1.2 Ma (latest Maestrichtian). Sequence boundaries at the base and the top of the Marshalltown sequence match boundaries elsewhere in the Atlantic Coastal Plain (Owens and Gohn, 1985) and the inferred global sea-level record of Haq et al. (1987); they support eustatic changes as the mechanism controlling depositional history of this sequence. However, the latest Maestrichtian record in New Jersey does not agree with Haq et al. (1987); we attribute this to correlation and time-scale differences near the Cretaceous/Paleogene boundary. High sedimentation rates in the latest Maestrichtian of New Jersey (Shrewsbury Member of the Red Bank Formation and the Tinton Formation) suggest tectonic uplift and/or rapid progradation during deposition of the highstand systems tract.

GSA Bulletin↗
USGS2013

Final report for sea-level rise response modeling for San Francisco Bay estuary tidal marshes

The International Panel on Climate Change has identified coastal ecosystems as areas that will be disproportionally affected by climate change. Current sea-level rise projections range widely with 0.57 to 1.9 meters increase in mea sea level by 2100. The expected accelerated rate of sea-level rise through the 21 st century will put many coastal ecosystems at risk, especially those in topographically low-gradient areas. We assessed marsh accretion and plant community state changes through 2100 at 12 tidal salt marshes around San Francisco Bay estuary with a sea-level rise response model. Detailed ground elevation, vegetation, and water level data were collected at all sites between 2008 and 2011 and used as model inputs. Sediment cores (taken by Callaway and others, 2012) at four sites around San Francisco Bay estuary were used to estimate accretion rates. A modification of the Callaway and others (1996) model, the Wetland Accretion Rate Model for Ecosystem Resilience (WARMER), was utilized to run sea-level rise response models for all sites. With a mean sea level rise of 1.24 m by 2100, WARMER projected that the vast majority, 95.8 percent (1,942 hectares), of marsh area in our study will lose marsh plant communities by 2100 and to transition to a relative elevation range consistent with mudflat habitat. Three marshes were projected to maintain marsh vegetation to 2100, but they only composed 4.2 percent (85 hectares) of the total marsh area surveyed.

California↗
USGS2025

Wave driven cross shore and alongshore transport reveal more extreme projections of shoreline change in island environments

Coastal erosion, intensified by sea level rise, poses significant threats to coastal communities in Hawaiʻi and similar island communities. This study projects long-term shoreline change on the Hawaiian Island of O‘ahu using the data-assimilated CoSMoS-COAST shoreline change model. CoSMoS-COAST models four key shoreline processes: (1) Alongshore transport, (2) Recession due to sea level rise, (3) Cross-shore transport due to waves, and (4) Residual processes represented by a linear trend term. This study marks the first application of CoSMoS-COAST for an oceanic equatorial island with narrow beaches and a dynamic wave climate. The model is informed with a novel combination of shoreline data derived from high-resolution imagery from Planet, Sentinel-2, and Landsat satellites, wave-climate hindcasts specific to Hawai‘i, and regional beach-slope surveys. On a dynamic northern Oʻahu beach, the model achieved a root mean square error of 9.4 m between observations and model output. CoSMoS-COAST predicts that 81% of O‘ahu’s sandy beach coastline could experience beach loss by 2100; with 39.8% of this loss happening by 2030. This represents an increase, 43.3%, in net landward shoreline change compared to previous erosion forecasts, for 0.3 m of sea level rise (2050). Additionally, dynamic processes such as cross-shore equilibrium processes and alongshore sediment transport, play a large contribution to gross shoreline change within the next decade, particularly on O ‘ahu’s north and west shores. In the long term, we find that recession due to sea level rise and residual processes dominate, but dynamic, wave-driven processes (longshore and cross-shore transport) still account for 34% of shoreline change between present and 2100. We assert dynamic, wave-driven processes are a crucial addition for accurate modeling of island sandy beach environments. These findings have implications for O‘ahu’s coastal planning and development, suggesting updates to shoreline policies that rely upon erosion forecasting, and highlights the importance of incorporating wave and alongshore transport in erosion models for other Pacific islands.

Hawaii↗