SEARCH · Geology Reports

Results for “Sedimentary Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86Linked to original sources

USGS1989

Isostatic residual gravity and crustal geology of the United States

A new isostatic residual gravity map of the conterminous United States presents continent-wide gravity data in a form that can be readily used, with geologic information and other geophysical data, in studies of the composition and structure of the continental crust. This map was produced from the gridded gravity data on which the recently released Gravity Anomaly Map of the United States is based. About 1 million onland and 0.8 million offshore gravity observations interpolated to a 4- by 4-km grid serve as the basis for both maps. The Airy-Heiskanen model of isostatic compensation of topography applied to topographic and bathymetric data averaged over 5- by 5-min compartments was used to remove, to first order, the large, long-wavelength Bouguer gravity anomalies caused by deep density distributions that support topographic loads. The parameters used in the Airy-Heiskanen model were topographic density, 2.67 g/cm 3 ; sea-level crustal thickness, 30 km; and density contrast across the base of the model crust, 0.35 g/cm 3 . Many of the conspicuous short-wavelength anomalies (widths less than several hundred kilometers) on the isostatic residual gravity map correlate with mapped or near-surface geologic features, and primarily reflect shallow-density distributions rather than any departures from isostatic equilibrium. In general, gravity highs occur over (1) mafic igneous bodies emplaced in rift or magmatic arc settings or as isolated intrusions controlled by structures; (2) accreted slices of mafic oceanic, island-arc, or transitional crust; and (3) uplifted crystalline basement. Gravity lows are found over (1) thick bodies of felsic intrusive or extrusive rocks; (2) sedimentary deposits in extensional, convergent, or transform settings; and (3) depressed crystalline basement. Anomalies with widths as much as 1,000 km or more also appear to reflect crustal properties in many cases—several broad gravity highs are associated with crust having a high average seismic wave velocity, and comparable broad gravity lows occur over areas of low average seismic velocity. Alternative ways of viewing the isostatic residual gravity data provide additional information about density distributions in the crust. The first-vertical derivative map accentuates gravity anomalies over shallow, abrupt density changes at the expense of those resulting from deeper or more gradual density transitions. The maximum horizontal gradient map contains information about the locations of pronounced density boundaries. Two-dimensional spectral analysis of the gravity data provides a quantitative means for identifying dominant fabrics in the gravity field and for distinguishing various terranes from each other. Neither Bouguer nor isostatic residual gravity anomalies are particularly well suited for practical modeling of deep structure in conjunction with deep seismic information. However, a scheme in which the entire Earth outside the area of interest is approximated by laterally homogeneous layers and isostatically compensated topography, and in which the area of interest is modeled using the seismic constraints applied in a two-and-one-half-dimensional geometry, holds promise for exploiting useful features of both the Bouguer and isostatic residual gravity anomalies.

conterminous United States↗

USGS2020

Integrated geophysical analysis provides an alternate interpretation of the northern margin of the North American Midcontinent Rift System, Central Lake Superior

The Midcontinent Rift System (MRS) is a 1.1 Ga sequence of voluminous basaltic eruptions and multiple intrusions followed by widespread sedimentation that extends across the Midcontinent and northern Great Lakes region of North America. Previous workers have commonly used seismic-reflection data (Great Lakes International Multidisciplinary Program on Crustal Evolution [GLIMPCE] line A) to demonstrate that the northern rift margin in central Lake Superior developed as a normal growth fault that was structurally inverted to a reverse fault during a compressional event after rifting had ended. A prominent, curvilinear aeromagnetic anomaly that extends from Isle Royale, Michigan, to Superior Shoal in central Lake Superior, Ontario (the IR-SS anomaly), is commonly presented as a manifestation of this reverse fault. We have integrated multidisciplinary geophysical analyses (seismic-reflection, seismic-refraction, aeromagnetic, and gravity), physical-property information (density, magnetic susceptibility and remanence, and compressional-wave velocity), and geologic concepts to develop an alternate interpretation of the rift margin along GLIMPCE line A, where it intersects the IR-SS anomaly. Our new model indicates that a normal fault is the dominant structure at the northern rift margin along line A, contrary to the original rift-margin paradigm, which asserts that compressional structures are the dominant features preserved today. Integral to this alternate model is a newly interpreted, prerift sedimentary basin intruded by sills in northern Lake Superior. Our alternate model of the northern rift margin has implications for interpreting the style, scale, and timing of extension, rift-related intrusion, and compression during development of the MRS.

Lake Superior↗

USGS2006

Vitrinite Reflectance Data for the Wind River Basin, Central Wyoming

Introduction: The Wind River Basin is a large Laramide (Late Cretaceous through Eocene) structural and sedimentary basin that encompasses about 7,400 mi2 in central Wyoming. The basin boundaries are defined by fault-bounded Laramide uplifts that surround it, including the Owl Creek and Bighorn Mountains to the north, Wind River Range to the west, Granite Mountains to the south, and Casper Arch to the east. The purpose of this report is to present new vitrinite reflectance data to be used in support of the U.S Geological Survey assessment of undiscovered oil and gas resources of the Wind River Basin. One hundred and nineteen samples were collected from Jurassic through Tertiary rocks, mostly coal-bearing strata, in an effort to better understand and characterize the thermal maturation and burial history of potential source rocks.

Open-File Report↗

USGS2008

Chemical data for precipitate samples

During studies of sulfide oxidation in coastal areas of Prince William Sound in 2005, precipitate samples were collected from onshore and intertidal locations near the Ellamar, Threeman, and Beatson mine sites (chapter A, fig. 1; table 7). The precipitates include jarosite and amorphous Fe oxyhydroxide from Ellamar, amorphous Fe oxyhydroxide from Threeman, and amorphous Fe oxyhydroxide, ferrihydrite, and schwertmannite from Beatson. Precipitates occurring in the form of loose, flocculant coatings were harvested using a syringe and concentrated in the field by repetitive decanting. Thicker accumulations were either scraped gently from rocks using a stainless steel spatula or were scooped directly into receptacles (polyethylene jars or plastic heavy-duty zippered bags). Most precipitate samples contain small amounts of sedimentary detritus. With three jarosite-bearing samples from Ellamar, an attempt was made to separate the precipitate from the heavy-mineral fraction of the sediment. In this procedure, the sample was stirred in a graduated cylinder containing deionized water. The jarosite-rich suspension was decanted onto analytical filter paper and air dried before analysis. Eleven precipitate samples from the three mine sites were analyzed in laboratories of the U.S. Geological Survey (USGS) in Denver, Colorado (table 8). Major and trace elements were determined by inductively coupled plasma-mass spectrometry following multiacid (HCl-HNO3-HClO4-HF) digestion (Briggs and Meier, 2002), except for mercury, which was analyzed by cold-vapor atomic absorption spectroscopy (Brown and others, 2002a). X-ray diffraction (XRD) analyses were performed on powdered samples (<200 mesh) by S. Sutley of the USGS. Additional details regarding sample preparation and detection limits are found in Taggert (2002). Discussions of the precipitate chemistry and associated microbial communities are presented in Koski and others (2008) and Foster and others (2008), respectively.

Alaska↗

USGS2011

Seismic calibration shots conducted in 2009 in the Imperial Valley, southern California, for the Salton Seismic Imaging Project (SSIP)

Rupture of the southern section of the San Andreas Fault, from the Coachella Valley to the Mojave Desert, is believed to be the greatest natural hazard facing California in the near future. With an estimated magnitude between 7.2 and 8.1, such an event would result in violent shaking, loss of life, and disruption of lifelines (freeways, aqueducts, power, petroleum, and communication lines) that would bring much of southern California to a standstill. As part of the Nation's efforts to prevent a catastrophe of this magnitude, a number of projects are underway to increase our knowledge of Earth processes in the area and to mitigate the effects of such an event. One such project is the Salton Seismic Imaging Project (SSIP), which is a collaborative venture between the United States Geological Survey (USGS), California Institute of Technology (Caltech), and Virginia Polytechnic Institute and State University (Virginia Tech). This project will generate and record seismic waves that travel through the crust and upper mantle of the Salton Trough. With these data, we will construct seismic images of the subsurface, both reflection and tomographic images. These images will contribute to the earthquake-hazard assessment in southern California by helping to constrain fault locations, sedimentary basin thickness and geometry, and sedimentary seismic velocity distributions. Data acquisition is currently scheduled for winter and spring of 2011. The design and goals of SSIP resemble those of the Los Angeles Region Seismic Experiment (LARSE) of the 1990's. LARSE focused on examining the San Andreas Fault system and associated thrust-fault systems of the Transverse Ranges. LARSE was successful in constraining the geometry of the San Andreas Fault at depth and in relating this geometry to mid-crustal, flower-structure-like decollements in the Transverse Ranges that splay upward into the network of hazardous thrust faults that caused the 1971 M 6.7 San Fernando and 1987 M 5.9 Whittier Narrows earthquakes. The project also succeeded in determining the depths and seismic-velocity distributions of several sedimentary basins, including the Los Angeles Basin, San Fernando Valley, and Antelope Valley. These results advanced our ability to understand and assess earthquake hazards in the Los Angeles region. In order to facilitate permitting and planning for the data collection phase of SSIP, in June of 2009 we set off calibration shots and recorded the seismic data with a variety of instruments at varying distances. We also exposed sections of buried clay drainage pipe near the shot points to determine the effect of seismic energy on the pipes. Clay drainage pipes are used by the irrigation districts in both the Coachella and Imperial Valleys to prevent ponding and remove salts and irrigation water. This report chronicles the calibration project. We present new near-source velocity data that are used to test the regression curves that were determined for the LARSE project. These curves are used to create setback tables to determine explosive charge size and for placement of shot points. We also found that our shots did not damage the irrigation pipes and that the ODEX drilling system did well in the clay rich soils of the Imperial Valley.

California↗

USGS2021

Geophysical and video logs of selected wells at and near the former Naval Air Warfare Center Warminster, Bucks County, Pennsylvania, 2017-19

The U.S. Geological Survey (USGS) collected borehole geophysical and video logs in 17 open-hole wells in Northampton, Warminster, and Warwick Townships, Bucks County, Pennsylvania during 2017–19 to support detailed groundwater investigations at and near the former Naval Air Warfare Center (NAWC) Warminster, where groundwater contamination with per- and polyfluoroalkyl substances (PFAS) had become a concern since 2014. The area is underlain by the Triassic Stockton Formation, which forms a fractured-sedimentary-rock aquifer used for private, industrial, and public drinking-water supply. The geophysical and video logs were used to characterize the boreholes and identify potential water-bearing fractures for subsequent detailed investigations. Of the 17 wells that were logged, subsequent investigations were conducted by USGS in 15 wells and included hydraulic tests of discrete water-bearing zones using a straddle-packer system in 13 wells and depth-discrete point sampling in 2 wells. These 15 wells ranged in depth from about 210 to 604 feet (ft) below land surface (bls) and included six new 6-inch diameter wells drilled to initial depths of 600 ft bls on the former NAWC Warminster base property in 2018 and nine 8- to 12-inch diameter existing former production or unused test wells. Partial geophysical or video logs also were collected by USGS during 2018 in two other wells that were not included in subsequent detailed investigations. Most wells had numerous water-bearing fractures or openings throughout the depth of the open boreholes. Most of these water-bearing features appeared to be openings parallel to bedding or high-angle fractures approximately orthogonal to bedding. Casing lengths ranged from about 19 to 93 ft bls. Depth to the ambient water level at the time of logging ranged from about 1.8 ft above land surface in a flowing well to about 55 ft bls. Measured borehole flow was predominantly downward in most of the deepest wells (greater than 400 ft), which were commonly located at the highest land-surface elevations, and contained inflow from fractures at relatively shallow depths and outflow through fractures near or below depths of 500 ft bls. Borehole flow was predominantly upward in most wells less than 400 ft in depth.

Pennsylvania↗

USGS1979

Resource report for proposed OCS lease sale 57: Norton Basin, Alaska

This report is a summary of information about an area of the northern Bering Sea continental shelf that is bounded by the Seward Peninsula on the north, by the line of the United States-Russia Convention of 1867 on the west, and by St. Lawrence Island and the coastline that rims Norton Sound on the south and east. Scholl and Hopkins (1969) report that a sedimentary basin underlies the offshore area. More recent data, which form the basis of part of this report, show the basin is deepest beneath Norton Sound; also, the basin has sufficient depth and areal extent that the basin may be a target for development of hydrocarbon resources after Outer Continental Shelf (OCS) Lease Sale 57. The informal, but widely used, name for the basin is Norton Basin. The following discussion includes regional geology, geologic history, and offshore structure and stratigraphy as background data to discussion of the hydrocarbon potential and resource appraisal of the offshore area. Sections on environmental geology and on the technology and manpower needed and available for development of offshore resources are also included.

Alaska↗

USGS1995

Geohydrology and water quality of the Durham Center Area, Durham, Connecticut

Contaminated ground water is widespread and persistent beneath the Durham Center area in the town of Durham, Conn. Most of the contaminants are organic halides, usually trichloroethene, 1,1,1-trichloroethane, and tetrachloroethene. Less extensive chemical contamination of surface water, soil, and glacial sediments also has been detected. Two manufacturing companies, located at the northern and southern ends of this largely residential area, are believed to be the principal sources of the organic compounds detected in ground water. The contamination of water in the bedrock, the primary source of drinking water throughout the area, is the major environmental concern. Maximum concentrations of trichloroethene in three bed- rock wells range from 4,500 to about 5,500 mg/L (micrograms per liter). Concentrations of trichloroethene greater than 5 mg/L, the maximum contaminant level established for drinking water by the U.S Environmental Protection Agency, have regularly been detected in water samples from many other bedrock wells for at least 9 years. The geohydrology of the area is highly complex. Compact lodgment till that is up to 30 feet thick and probably fractured, overlies the bedrock. The bedrock is lithologically heterogeneous, and con- sists mostly of red fluvial sandstone, siltstone, and conglomerate; it is locally interbedded with black lacustrine shales and gray sandstones. Lithology and stratigraphy interpreted from borehole-geophysical logs at Durham Center are consistent with the Portland Formation subfacies described in earlier geologic studies. Beds strike nearly north-south and dip gently eastward. At least one high-angle normal fault transects the bedrock; it strikes northeast and dips northwest. Acoustic televiewer logs, measurements at out-crops, and azimuthal, square-array, resistivity data indicate a dominance of northeast-striking fractures that dip steeply northwest and southeast. Less prevalent strike directions are north to east-north-east. The till and sedimentary bedrock are dual-porosity, dual-permeability media. The hydraulic conductivity of the bulk mass of till is believed to be on the order of tenths of a foot per day to about 2.5 feet per day, with a total porosity of about 25 percent and an estimated average fracture porosity of less than 1 percent. The reported transmissivities of the bedrock range from less than 1 to about 17,000 feet squared per day and storativity is generally about 10-4, but the accuracy of these values is uncertain. The intergranular porosity of the sandstone units is estimated to average 5 percent, and estimates of fracture porosity from square-array, resistivity soundings at two sites were 1.1 and 2.7 percent. The bedrock has characteristics of both a single aquifer and a multi-unit, artesian or leaky aquifer system. A local ground-water-flow system that includes the upper part of the bedrock is unconfined. A large- scale flow system in deeper parts of the bedrock has transported organic compounds across topographic drainage divides. Borehole-geophysical logs and head measurements indicate that the natural ground- water-flow system in the bedrock has been altered by drilled wells that connect fractures and by with- drawals from wells. A conceptual model of the movement and fate of organic contaminants suggests that (1) nonaqueous phase organic halides are retained near their source; (2) flow is primarily through fractures in the till and through fractures and bedding-plane openings in the sedimentary rocks; (3) retardation of contaminants occurs primarily by diffusion from fractures into the aquifer matrix; and (4) transport directions of dissolved organic halides are controlled by a combination of natural hydraulic gradients, hydraulic gradients produced by the cyclical pumping of wells, and by the strike directions of bedrock faults, fractures, and bedding planes.

Connecticut↗

USGS1998

Geologic map of the Ennis 30' x 60' quadrangle, Gallatin and Madison Counties, Montana

The Ennis 1:100,000 quadrangle lies within both the Laramide (Late Cretaceous to early Tertiary) foreland province of southwestern Montana and the northeastern margin of the middle to late Tertiary Basin and Range province. The oldest rocks in the quadrangle are Archean high-grade gneiss, and granitic to ultramafic intrusive rocks that are as old as about 3.0 Ga. The gneiss includes a supracrustal assemblage of quartz-feldspar gneiss, amphibolite, quartzite, and biotite schist and gneiss. The basement rocks are overlain by a platform sequence of sedimentary rocks as old as Cambrian Flathead Quartzite and as young as Upper Cretaceous Livingston Group sandstones, shales, and volcanic rocks. The Archean crystalline rocks crop out in the cores of large basement uplifts, most notably the 'Madison-Gravelly arch' that includes parts of the present Tobacco Root Mountains and the Gravelly, Madison, and Gallatin Ranges. These basement uplifts or blocks were thrust westward during the Laramide orogeny over rocks as young as Upper Cretaceous. The thrusts are now exposed in the quadrangle along the western flanks of the Gravelly and Madison Ranges (the Greenhorn thrust and the Hilgard fault system, respectively). Simultaneous with the west-directed thrusting, northwest-striking, northeast-side-up reverse faults formed a parallel set across southwestern Montana; the largest of these is the Spanish Peaks fault, which cuts prominently across the Ennis quadrangle. Beginning in late Eocene time, extensive volcanism of the Absorka Volcanic Supergroup covered large parts of the area; large remnants of the volcanic field remain in the eastern part of the quadrangle. The volcanism was concurrent with, and followed by, middle Tertiary extension. During this time, the axial zone of the 'Madison-Gravelly arch,' a large Laramide uplift, collapsed, forming the Madison Valley, structurally a complex down-to-the-east half graben. Basin deposits as thick as 4,500 m filled the graben. Pleistocene glaciers sculpted the high peaks of the mountain ranges and formed the present rugged topography.

Montana↗

USGS2005

Kimmeridgian Shales Total Petroleum System of the North Sea Graben Province

The North Sea Graben of northwestern Europe, World Energy Project Province 4025, is entirely offshore within the territorial waters of Denmark, Germany, the Netherlands, Norway, and the United Kingdom. Extensional tectonics and failed rifting are fundamental to the distribution of oil and gas in the province. Accordingly, the geologic history and reser-voir rocks of the province are considered in the context of their temporal relationship to the principal extension and rifting events. The oil and gas accumulations of the province are considered part of a single petroleum system: the Kimmeridg-ian Shales Total Petroleum System (TPS). Source rocks of the Kimmeridgian Shales TPS were deposited in Late Jurassic to earliest Cretaceous time during the period of intensive exten-sion and rifting. The Kimmeridgian Shales contain typical 'type II' mixed kerogen. Oil and gas generation began locally in the North Sea Graben Province by Cretaceous time and has continued in various places ever since. Reservoirs are found in strata with ages ranging from Devonian to Eocene. Pre-rift reservoirs are found in fault-block structures activated during rifting and can be of any age prior to the Late Jurassic. Syn-rift reservoirs are restricted to strata actually deposited during maximum extension and include rocks of Late Jurassic to earliest Cretaceous age. Post-rift reservoirs formed after rifting and range in age from Early Cretaceous to Eocene. Seals are diverse, depending upon the structural setting and reservoir age. Pre-rift reservoirs com-monly have seals formed by fine-grained, post-rift sedimentary sequences that drape the Late Jurassic to earliest Cretaceous structures. Contemporaneous shales such as the Kimmeridge Clay seal many syn-rift reservoirs. Fields with post-rift res-ervoirs generally require seals in fine-grained Tertiary rocks. In most of the North Sea Graben, source rocks have been continuously buried since deposition. Structural trap forma-tion has also taken place continuously since Mesozoic time. As a result, oil and gas are present in a wide variety of settings within Province 4025. Assessment units for the World Energy Project were defined geographically in order to capture regional differ-ences in exploration history, geography, and geological evolution. Three geographic areas were assessed. The Viking Graben, in the northern part of the province, includes both United Kingdom and Norwegian territorial areas. The Moray Firth/Witch Ground in the west-central part of the province is entirely in United Kingdom. waters. The Central Graben in the southern part of the province includes territorial areas of Denmark, Germany, the Netherlands, Norway, and the United Kingdom. The North Sea Graben is estimated to contain between 4.3 and 25.6 billion barrels (BBO) of undiscovered, conventionally recoverable oil. Of that total, the Viking Graben is believed to contain 2.2 to 14.8 BBO of undiscov-ered oil, the Moray Firth/Witch Ground may contain between 0.3 and 1.9 BBO, and the Central Graben was estimated to contain undiscovered oil resources of 1.7 to 8.8 BBO. Prov-ince 4025 was also estimated to hold between 11.8 and 75 trillion cubic feet (TCF) of undiscovered natural gas. Of this total, 6.8 to 44.5 TCF is thought to exist in the Viking Graben, 0.6 to 3.4 TCF is estimated to be in the Moray Firth/Witch Ground, and 4.5 to 27.1 TCF of undiscovered gas is estimated to be in the Central Graben.

Bulletin↗

USGS2013

Investigations of groundwater system and simulation of regional groundwater flow for North Penn Area 7 Superfund site, Montgomery County, Pennsylvania

Groundwater in the vicinity of several industrial facilities in Upper Gwynedd Township and vicinity, Montgomery County, in southeast Pennsylvania has been shown to be contaminated with volatile organic compounds (VOCs), the most common of which is the solvent trichloroethylene (TCE). The 2-square-mile area was placed on the National Priorities List as the North Penn Area 7 Superfund site by the U.S. Environmental Protection Agency (USEPA) in 1989. The U.S. Geological Survey (USGS) conducted geophysical logging, aquifer testing, and water-level monitoring, and measured streamflows in and near North Penn Area 7 from fall 2000 through fall 2006 in a technical assistance study for the USEPA to develop an understanding of the hydrogeologic framework in the area as part of the USEPA Remedial Investigation. In addition, the USGS developed a groundwater-flow computer model based on the hydrogeologic framework to simulate regional groundwater flow and to estimate directions of groundwater flow and pathways of groundwater contaminants. The study area is underlain by Triassic- and Jurassic-age sandstones and shales of the Lockatong Formation and Brunswick Group in the Mesozoic Newark Basin. Regionally, these rocks strike northeast and dip to the northwest. The sequence of rocks form a fractured-sedimentary-rock aquifer that acts as a set of confined to partially confined layers of differing permeabilities. Depth to competent bedrock typically is less than 20 ft below land surface. The aquifer layers are recharged locally by precipitation and discharge locally to streams. The general configuration of the potentiometric surface in the aquifer is similar to topography, except in areas affected by pumping. The headwaters of Wissahickon Creek are nearby, and the stream flows southwest, parallel to strike, to bisect North Penn Area 7. Groundwater is pumped in the vicinity of North Penn Area 7 for industrial use, public supply, and residential supply. Results of field investigations by USGS at the site and results from other studies support, and are consistent with, a conceptual model of a layered leaky aquifer where the dip of the beds has a strong control on hydraulic connections in the groundwater system. Connections within and (or) parallel to bedding tend to be greater than across bedding. Transmissivities of aquifer intervals isolated by packers ranged over three orders of magnitude [from about 2.8 to 2,290 square feet per day (ft 2 /d) or 0.26 to 213 square meters per day (m 2 /d)], did not appear to differ much by mapped geologic unit, but showed some relation to depth being relatively smaller in the shallowest and deepest intervals (0 to 50 ft and more than 250 ft below land surface, respectively) compared to the intermediate depth intervals (50 to 250 ft below land surface) tested. Transmissivities estimated from multiple-observation well aquifer tests ranged from about 700 to 2,300 ft 2 /d (65 to 214 m 2 /d). Results of chemical analyses of water from isolated intervals or monitoring wells open to short sections of the aquifer show vertical differences in concentrations; chloride and silica concentrations generally were greater in shallow intervals than in deeper intervals. Chloride concentrations greater than 100 milligrams per liter (mg/L), combined with distinctive chloride/bromide ratios, indicate a different source of chloride in the western part of North Penn Area 7 than elsewhere in the site. Groundwater flow at a regional scale under steady-state conditions was simulated by use of a numerical model (MODFLOW-2000) for North Penn Area 7 with different layers representing saprolite/highly weathered rock near the surface and unweathered competent bedrock. The sedimentary formations that underlie the study area were modeled using dipping model layers for intermediate and deep zones of unweathered, fractured rock. Horizontal cell model size was 100 meters (m) by 100 meters (328 ft by 328 ft), and model layer thickness ranged from 6 m (19.7 ft) representing shallow weathered rock and saprolite up to 200 m (656 ft) representing deeper dipping bedrock. The model did not include detailed structure to account for local-scale differences in hydraulic properties, with the result that local-scale groundwater flow may not be well simulated. Additional detailed multi-well aquifer tests would be needed to establish the extent of interconnection between intervals at the local scale to address remediation of contamination at each source area. This regional groundwater-flow model was calibrated against measured groundwater levels (1996, 2000, and 2005) and base flow estimated from selected streamflow measurements by use of nonlinear-regression parameter-estimation algorithms to determine hydraulic conductivity and anisotropy of hydraulic conductivity, streambed hydraulic conductivity, and recharge during calibration periods. Results of the simulation using the calibrated regional model indicate that the aquifer appears to be anisotropic where hydraulic conductivity is greatest parallel to the orientation of bedding of the formations underlying the area and least in the cross-bed direction. The maximum hydraulic conductivity is aligned with the average regional strike of the formations, which is “subhorizontal” in the model because the altitudes of the beds and model cells vary in the strike, as well as dip, direction. Estimated subhorizontal hydraulic conductivities (in strike direction parallel to dipping beds) range from 0.001 to 1.67 meters per day (0.0032 to 5.5 feet per day). The ratio of minimum (dip direction) to maximum (strike direction) subhorizontal hydraulic conductivity ranges from 1/3.1 to 1/8.6, and the ratio of vertical to horizontal hydraulic conductivity ranges from 1/1 to 1/478. However, limited available field data precluded rigorous calibration of vertical anisotropy in the model. Estimated recharge rates corresponding to calibration periods in 1996, 2000, and 2005 are 150, 109, and 124 millimeters per year (5.9, 4.3, and 4.9 inches per year), respectively. The calibrated groundwater-flow model was used to simulate groundwater flow under steady-state conditions during periods of relatively high withdrawals (pumpage) (1990) and relatively low withdrawals (2000 and 2005). Groundwater-flow paths originating from recharge areas near known areas of soil contamination (sources) were simulated. Pumped industrial and production wells captured more groundwater from several of these sources during 1990 than after 1990 when pumping declined or ceased and greater amounts of contaminated groundwater moved away from North Penn Area 7 Superfund site to surrounding areas. Uncertainty in simulated groundwater-flow paths from contaminant sources and contributing areas, resulting from uncertainty in estimated hydraulic properties of the model, was illustrated through Monte Carlo simulations. The effect of uncertainty in the vertical anisotropy was not included in the Monte Carlo simulations. Contributing areas indicating the general configuration of groundwater flow towards production well MG-202 (L-22) in the study area also were simulated for the different time periods; as simulated, the flow paths do not pass through any identified contaminant source in North Penn Area 7. However, contributing areas to wells, such as MG-202, located near many pumped wells are particularly complex and, in some cases, include areas that contribute flow to streams that subsequently recharge the aquifer through stream loss. In these cases, water-quality constituents, including contaminants that are present in surface water may be drawn into the aquifer to nearby pumped wells. Results of a simulated shutdown of well MG-202 under steady-state 2005 conditions showed that the area contributing recharge for nearby production well MG-76 (L-17), when MG-202 is not pumping, shifts downstream and is similar to the area contributing recharge for MG-202 when both wells are pumping. Concentrations of constituents in groundwater samples collected in fall 2005 or spring 2006 were compared to simulated groundwater-flow paths for the year 2005 to provide a qualitative assessment of model results. The observed spatial distribution of selected constituents, including TCE, CFC-11, and CFC-113 in groundwater in 2005 and the chloride/bromide mass ratios in 2006, generally were consistent with the model results of the simulated 2005 groundwater-flow paths at North Penn Area 7, indicating the presence of several separate sources of contaminants within North Penn Area 7.

Pennsylvania↗

USGS1990

Geology, geophysics, and geochronology of the Manson impact structure

A problem with the impact hypothesis for the Cretaceous/Tertiary (K/T) mass extinction is the apparent absence of an identifiable impact site. The Manson impact structure is a candidate site because of its size (the largest such structure recognized in the United States); in addition, the largest and most abundant shocked quartz grains at the K/T boundary are found relatively close by, and its age is indistinguishable from that of the K/T boundary. The region of northwest central Iowa that contains the Manson impact structure is covered by Quaternary glacial deposits, which are underlain by Phanerozoic sedimentary rocks (mostly flat-lying carbonates) and Proterozoic red clastic, metamorphic, volcanic, and plutonic rocks. In a circular area about 22 mi (35 km) in diameter around Manson, Iowa, this normal sequence is absent or “disturbed.” Within the structure, three roughly concentric zones of rock associations have been identified: an outer zone of displaced strata, a zone of completely disrupted strata, and a central area in which basement igneous and metamorphic rocks have been uplifted at least 1,220 ft (4,000 m). Gravity, magnetic, and seismic refraction surveys readily identify the central uplift within the structure. Manson is established as an impact structure based on its circular shape, its central uplift, and the presence of shocked quartz within the granitic central uplift. Paleontological evidence, a fission track age, and preliminary 40 Ar/ 39 Ar dating all allowed a K/T boundary age for the Manson structure. Improved 40 Ar/ 39 Ar age spectra may be interpreted in terms of samples that were incompletely degassed during heating due to the Manson impact. An age of 65.7 ± 1.0 Ma was obtained, a value indistinguishable from that of the K/T boundary.

Iowa↗

USGS2002

Petroleum geology and total petroleum systems of the Widyan Basin and Interior Platform of Saudi Arabia and Iraq

Two total petroleum systems are associated with the Widyan Basin - Interior Platform Province in northern Saudi Arabia and western Iraq. In the Paleozoic Qusaiba/Akkas/Abba/ Mudawwara Total Petroleum System, which consists of one assessment unit - the Horst/Graben-Related Oil and Gas Assessment Unit - high-gravity, low-sulfur crude oil, as well as natural gas, occurs in horst/graben-related traps that formed prior to, during, and after Hercynian deformation (Carboniferous). The source of oil and gas is from organic-rich marine shale at the base of the Silurian sedimentary sequence (Qusaiba, Akkas, Mudawwara, and Abba Formations) that was deposited under dysoxic to anoxic conditions in an intra-shelf basin located north of the Central Arabian Arch. Onset of oil generation in Iraq began about 250 million years ago (Ma) and in eastern Saudi Arabia about 160 Ma, reaching peak generation, expulsion, migration, and entrapment during the Jurassic Period. In Saudi Arabia, petroleum migrated into fluvial and eolian quartzose sandstones of the Carboniferous-Early Permian Unayzah Formation that overlies the Hercynian unconformity, filling in rifts and half-grabens to thicknesses ranging to more than 400 meters. Combined stratigraphic-structural traps exist where the Unayzah Formation is the reservoir, as is the case in central Saudi Arabia. Oil and gas are sealed in those reservoirs by overlying tight carbonate- evaporite strata, and by subunconformity pinchouts of Pre-Unayzah clastic reservoir units against impermeable facies. In Iraq, reservoirs are sandstones of the Ordovician Upper Khabour and Silurian Akkas Formations. Over most of the Southwestern Desert of Iraq, Lower Silurian shale is a seal for hydrocarbons in the underlying Ordovician Khabour Formation. The Jurassic Gotnia/Barsarin/Sargelu/Najmah Total Petroleum System has two assessment units: the Platform Horst/Graben- Related Oil Assessment Unit and the Basinal Oil and Gas Assessment Unit. All reservoirs are in the Upper Jurassic Najmah Limestone and Gotnia Formation in Iraq, and the correlative Arab Formation in Saudi Arabia, occurring as lenses of marine bar or shelf-margin calcarenites, calcarenitic limestone, and dolomite. These strata grade eastward into organic-rich source rocks that were deposited under anoxic and dysoxic conditions in three restricted intra-shelf basins - from north to south, the Gotnia, Arabian, and Southern Arabian Gulf Basins. Maturation of the Upper Jurassic source-rock formations (Sargelu and Naokelekan Formations in Iraq) began around 90 Ma; peak generation took place from 85 to 13 Ma. With time, the oil migrated updip and was trapped in calcarenite lenses. Later, oil remigrated and was trapped in anticlines that began to form in Early Cretaceous time. Younger Jurassic shale and anhydrite seal rocks are distributed throughout the total petroleum system. The Widyan Basin-Interior Platform Province (2023) ranks 17th in the world, exclusive of the United States, with 62.5 billion barrels of oil equivalent of total petroleum endowment (cumulative production plus remaining petroleum plus estimated mean undiscovered volumes). Mean estimates of undiscovered petroleum for the province, which includes both Paleozoic and Jurassic petroleum systems as well as portions of three additional total petroleum systems from adjacent provinces, are 21.22 billion barrels of oil, 94.75 trillion cubic feet of gas (15.8 billion barrels of oil equivalent), and 6.85 billion barrels of natural gas liquids. The Paleozoic total petroleum system is dominantly gas prone, whereas the volumetrically larger Jurassic total petroleum system is oil prone - resulting in the characterization of the province as an oil province. The discovery maturity for the province is a relatively low 31 percent, meaning that much of the province petroleum potential lies in the future.

Arabian Peninsula↗

USGS1983

Landsat analysis of the Yangjiatan tungsten district, Hunan Province, People's Republic of China

The Yangjiatan tungsten district at latitude 27??28??? N. and longitude 111??54???E. is located about 140 km southwest of the city of Changsha and 35 km northeast of the town of Shaoyang, southeast Hunan Province, People's Republic of China. The deposits, consisting largely of scheelite in veins (Wang, 1975), are contained in highly folded and faulted sedimentary rocks of Paleozoic, Mesozoic, and Cenozoic age intruded by granitic plutons that are circular in plan view. The major faults and folds trend in a northeasterly direction; whereas, the plutons are clustered in a more easterly trending band across the Landsat image. Landsat image E-2338-02202, acquired December 26, 1975, is number 470 in the "Landsat Image Atlas of the People's Republic of China" printed by the Publishing House of Geology in 1979. A computer-compatible tape of the image was analyzed and used as a demonstration project under a United Nations technical assistance program. Supervised classification of soils, rocks, and vegetation; band ratioing to detect limonite alteration; and edge enhancement were all conducted to demonstrate the flexibility and capability of interactive computer systems. Field evaluation of the results of this work will be conducted by colleagues of the Remote Sensing Center for Geology, Ministry of Geology, in China. ?? 1983.

Advances in Space Research↗

USGS2003

Geologic map of the Big Delta B-2 quadrangle, east-central Alaska

New 1:63,360-scale geologic mapping of the Big Delta B-2 quadrangle provides important data on the structural setting and age of geologic units, as well as on the timing of gold mineralization plutonism within the Yukon-Tanana Upland of east-central Alaska. Gold exploration has remained active throughout the region in response to the discovery of the Pogo gold deposit, which lies within the northwestern part of the quadrangle near the south bank of the Goodpaster River. Geologic mapping and associated geochronological and geochemical studies by the U.S. Geological Survey (USGS) and the Alaska Department of Natural Resources, Division of Mining and Water Management, provide baseline data to help understand the regional geologic framework. Teck Cominco Limited geologists have provided the geologic mapping for the area that overlies the Pogo gold deposit as well as logistical support, which has lead to a much improved and informative product. The Yukon-Tanana Upland lies within the Tintina province in Alaska and consists of Paleozoic and possibly older(?) supracrustal rocks intruded by Paleozoic (Devonian to Mississippian) and Cretaceous plutons. The oldest rocks in the Big Delta B-2 quadrangle are Paleozoic gneisses of both plutonic and sedimentary origin. Paleozoic deformation, potentially associated with plutonism, was obscured by intense Mesozoic deformation and metamorphism. At least some of the rocks in the quadrangle underwent tectonism during the Middle Jurassic (about 188 Ma), and were subsequently deformed in an Early Cretaceous contractional event between about 130 and 116 Ma. New U-Pb SHRIMP data presented here on zircons from the Paleozoic biotite gneisses record inherited cores that range from 363 Ma to about 2,130 Ma and have rims of euhedral Early Cretaceous metamorphic overgrowths (116 +/- 4 Ma), interpreted to record recrystallization during Cretaceous west-northwest-directed thrusting and folding. U-Pb SHRIMP dating of monazite from a Paleozoic gneiss sample yields an age of 112 +/- 2 Ma; the monazite presumably grew during the waning stages of the intense regional Cretaceous ductile deformation. The Cretaceous ductile deformation was followed closely by granite plutonism and gold mineralization. The main pulse of gold mineralization is temporally and spatially associated with the Cretaceous granitic dikes and plutons and occurred during regional uplift and extension.

IMAP↗

USGS1974

Thermal data from heat-flow test wells near Long Valley, California

As part of the Geological Survey's study of the Long Valley area, an attempt was made to define the regional thermal setting of the caldera. The first phase of this study involved the drilling of four holes in granitic rocks outside of the caldera and two holes within it (Figure 1). LV was drilled as a hydrologic test well. In Figure 1, the light areas are areas of crystalline rocks and the stippled area, volcanic and sedimentary rocks. (For an explanation of the symbols, see Plate 1 of Bateman and others (1963).) Preliminary temperature measurements and thermal conductivity determinations have been completed and are presented in this report. Also presented herein are data obtained in November 1973 from the shallow holes drilled by Lewis (1974) and some thermal conductivity values from these short holes. These preliminary data are being released now because of intense public interest. The study is continuing, and an interpretive report will be written later this year. The temperature measurements are presented in both graphs and tables. Thermal conductivity data are tabulated as a function of depth for each hole. For locations of the shallow test wells, reference should be made to the quadrangle maps shown in Figures 3 through 13 of Lewis (1974).

California↗

USGS2015

Geologic Map of Baranof Island, southeastern Alaska

This map updates the geology of Baranof Island based on fieldwork, petrographic analyses, paleontologic ages, and isotopic ages. These new data provide constraints on depositional and metamorphic ages of lithostratigraphic rock units and the timing of structures that separate them. Kinematic analyses and thermobarometric calculations provide insights on the regional tectonic processes that affected the rocks on Baranof Island. The rocks on Baranof Island are components of a Paleozoic to Early Tertiary oceanic volcanic arc complex, including sedimentary and volcanic rocks that were deposited on and adjacent to the arc complex, deformed, and accreted. The arc complex consists of greenschist to amphibolite facies Paleozoic metavolcanic and metasedimentary rocks overlain by lower-grade Triassic metasedimentary and metavolcanic rocks and intruded by Jurassic calc-alkaline plutons. The Paleozoic rocks correlate well in age and lithology with rocks of the Sicker and Buttle Lake Groups of the Wrangellia terrane on Vancouver Island and differ from rocks of the Skolai Group that constitute basement to type-Wrangellia in the Wrangell Mountains. The Jurassic intrusive rocks are correlative with plutons that intrude the Wrangellia terrane on Vancouver Island but are lacking in the Wrangell Mountains. The rocks accreted beneath the arc complex are referred to as the Baranof Accretionary Complex in this report and are correlated with the Chugach Accretionary Complex of southern and southeastern Alaska and with the Pacific Rim Complex on Vancouver Island. Stratigraphic correlations between upper- and lower-plate rocks on Baranof Island and western Chichagof Island with rocks on Haida Gwaii and Vancouver Island, in addition to correlative ages of intrusive rocks and restorations of the Fairweather-Queen Charlotte, Chatham Strait, and Peril Strait Faults that define the Baranof-Chichagof block, suggest Baranof Island was near Vancouver Island at the time of initiation of arc magmatism in the Early Jurassic. Early Eocene plutons that intruded the accretionary complex outboard of the arc on Baranof Island are attributed to anatectic melting of trench sediments resulting from subduction of a spreading center. Oligocene intrusive rocks on Baranof Island correlate in age and composition with intrusive rocks in the Kano Plutonic Suite on Haida Gwaii, and similar magmatic sources are inferred.

Alaska↗

USGS2021

Hydrogeologic framework of the Big Lost River Basin, south-central Idaho, chap. A of Zinsser, L.M., ed., Characterization of water resources in the Big Lost River Basin, south-central Idaho

Surface-water and groundwater resources in the Big Lost River Basin of south-central Idaho are extensively interconnected; this interchange affects and is affected by water-resource management for irrigated agriculture and other uses in the basin. Concerns from water users regarding declining groundwater levels, declining streamflows, and drought helped motivate an updated evaluation of water resources in the Big Lost River Basin. The hydrogeologic framework presented in this report provides a conceptual basis for understanding groundwater resources in the Big Lost River Basin and comprises three major parts: (1) conceptual description of four hydrogeologic units, (2) development of a three-dimensional hydrogeologic framework model representing the spatial distribution of the hydrogeologic units, and (3) a description of groundwater occurrence and movement. This hydrogeologic framework represents the first of three planned reports describing water resources in the Big Lost River Basin; subsequent reports are intended to present a groundwater budget for the basin and to describe the results of a series of events measuring gains to and losses from streamflow in the Big Lost River. This report was prepared by the U.S. Geological Survey in cooperation with the Idaho Department of Water Resources. The Big Lost River Basin has four hydrogeologic units. First, the Quaternary unconsolidated sediments unit comprises the basin-fill alluvial aquifer and generally is used within 250 feet of the land surface. The Quaternary unconsolidated sediments unit is spatially heterogeneous, with locally confining conditions in some areas, and is the most heavily used hydrogeologic unit in the basin. Second, the Paleozoic sedimentary rocks unit, composed primarily of carbonates with some siliciclastic rocks, represents the major bedrock aquifer and contributes subsurface recharge at the margins of the alluvial aquifer. Third, the Tertiary volcanic rocks unit, composed primarily of andesite and dacite with lesser tuff, is locally important to water production, particularly in faulted and fractured zones. The Paleozoic sedimentary rocks hydrogeologic unit occurs at the valley margins and underlies tributaries throughout the basin, whereas the Tertiary volcanic rocks hydrogeologic unit primarily occurs in uplands in the western one-half of the basin. Fourth, the Quaternary basalt rocks unit consists of multiple basalt flows that are interbedded with the Quaternary unconsolidated sediments unit in the southern end of the Big Lost River Basin and contains at least three water-bearing zones. Insights gained from this updated hydrogeologic framework will help inform current water-resource management in the Big Lost River Basin.

Idaho↗