Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Names”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86Linked to original sources
USGS1923

The fauna of the so-called Dakota formation of northern central Colorado and its equivalent in southeastern Wyoming

This paper describes a small fauna from beds in northern central Colorado that have long been designated the Dakota formation, often with doubt that all the beds so named were really equivalent to the typical Dakota sandstone of eastern Nebraska. The upper part of the equivalent beds in southeastern Wyoming was referred by some writers to the Benton Shale and the lower part of the Cloverly formation. This so-called Dakota formation of northern central Colorado and its equivalent in southeastern Wyoming consist of cherty conglomerate, brown quartzose sandstone, and dark shale. The conglomerate is usually at the base of the series and at many localities is overlain by a single shale unit and that in turn by a sandstone. At other localities, however, there are several alternations of sandstone and shale above the basal conglomeratic layer. The fossil described in this paper, except one specimen, were obtained from the shales of the middle part of the formation. The single specimen, an ammonite, came from the uppermost sandstone.

Colorado;Wyoming↗
USGS1985

Stratigraphy and characteristic mollusks of the Pamunkey Group (Lower Tertiary) and the Old Church Formation of the Chesapeake Group— Virginia coastal plain

Along the Pamunkey River and its tributaries can be found a very complete, well-preserved, Tertiary stratigraphic record that reflects the sea-level changes as well as the local tectonic history of the central Virginia Coastal Plain. Using this record, I have described the lower Tertiary units and proposed a sequential model for their occurrence. Sediments examined in this study range in age from early Paleocene to latest Oligocene or earliest Miocene. Upper Tertiary units are described where they occur in the same sections with the lower Tertiary beds. The Brightseat Formation (lower Paleocene), Aquia Formation (upper Paleocene), Marlboro Clay (upper Paleocene), Nanjemoy Formation (lower Eocene), Piney Point Formation (middle Eocene) and Old Church Formation (new unit, upper Oligocene and lower Miocene) were studied. The definitions of the Piscataway and Paspotansa Members of the Aquia are amended, and a lectostratotype (principal reference section) is designated for those units as well as the Aquia on the Potomac River just below the mouth of Aquia Creek. A lectostratotype section is also designated for the Nanjemoy and its two members, the Potapaco and the Woodstock. That section is on the Potomac above Popes Creek. Beds assigned to the Piney Point and Old Church Formations, previously known only in the subsurface, crop out extensively on the Pamunkey River. A hypostratotype (reference section) is selected for the Piney Point Formation on the Pamunkey River at Horseshoe. The Old Church Formation (named herein) is included in the Chesapeake Group. Areal extent of the stratigraphic units was determined by correlation of outcropping beds on the Pamunkey, Patuxent, Potomac, Rappahannock, Mattaponi, Chickahominy, and James Rivers supplemented by well data. Comparisons of the onlap histories of the Salisbury, Albemarle, and Charleston Embayments indicate a number of simultaneous transgressive events implying global sea-level rises. More restricted transgressions appear to be the result of local downwarping.

Virginia↗
USGS1988

Ground-water hydraulics, regional flow, and ground-water development of the Floridan aquifer system in Florida and in parts of Georgia, South Carolina, and Alabama

The Floridan aquifer system is one of the major sources of groundwater supplies in the United States. This productive aquifer system underlies all of Florida, southeast Georgia, and small parts of adjoining Alabama and South Carolina, for a total area of about 100,000 square miles. About 3 billion gallons of water per day were withdrawn from the aquifer system in 1980, and in many areas the Floridan is the sole source of freshwater. The Floridan aquifer system is a sequence of hydraulically connected carbonate rocks (principally limestone with some dolomite) ranging in age generally from late Paleocene to early Miocene. The rocks vary in thickness from a featheredge where they crop out to more than 3,500 feet where the aquifer is deeply buried. The aquifer system generally consists of an upper aquifer and a lower aquifer separated by a lesspermeable confining unit of highly variable properties. In parts of north Florida and southwest Georgia, where little permeability contrast exists among the units, the Floridan is effectively one continuous aquifer. The upper and lower aquifers, named the Upper Floridan aquifer and the Lower Floridan aquifer, are defined on the basis of permeability and their boundaries locally do not coincide with those for either time-stratigraphic or rock-stratigraphic units. Overlying much of the Floridan aquifer system are low-permeability clastic rocks. The lithology, thickness, and integrity of these rocks determine the degree of confinement and influence the distribution of natural recharge, discharge, and ground-water flow in the Floridan. The permeability of the Floridan aquifer system is derived from small openings including fossil hashes and solution-widened joints as well as large cavernous openings in karst areas. Diffuse flow predominates where the small openings occur, whereas conduit flow may occur where large cavernous openings are. Transmissivities are highest (greater than 1,000,000 feet squared per day) in the unconfined karst areas of central and northern Florida. Lowest transmissivities (less than 50,000 feet squared per day) occur in panhandle Florida and southernmost Florida where the Upper Floridan aquifer is confined by thick clay sections. The hydraulic properties of the Lower Floridan aquifer are not well known; however, intervals of high transmissivity occur that have been attributed to paleokarst development. Springs, nearly all of which occur in unconfined and semiconfined parts of the Upper Floridan aquifer in Florida are the dominant feature of the Floridan flow system. Before ground-water development, spring flow and point discharge to surface-water bodies were about 88 percent of the estimated 21,500 cubic feet per second total discharge, or about 19,000 cubic feet per second. Diffuse upward leakage, which occurs primarily in confined areas, accounted for the remaining 12 percent or about 2,500 cubic feet per second. Most of the recharge necessary to sustain springflow and aquifer discharge to streams and lakes occurs relatively close to springs and areas of point discharge to surface-water bodies. Recharge to the Upper Floridan is highest, averaging 10-20 inches per year, in unconfined or semiconfined spring areas. The proximity of high recharge to high discharge implies a vigorous and well-developed shallow flow system in the unconfined and semiconfined parts of the Upper Floridan aquifer. Ground-water flow is very sluggish in the parts of the aquifer system that are deeply buried and tightly confined, primarily southeast Georgia and northeast Florida, south Florida, and far-west panhandle Florida. Discharge to springs, streams, and lakes is practically nonexistent in the tightly confined areas and natural discharge occurs almost exclusively by diffuse upward leakage through thick overburden. The regional flow system has not been appreciably altered by groundwater development. However, increasing pumpage that reached 3 billion gallons per day by 1980 has resulted in long-term regional water level decline of more than 10 feet in three broad areas: coastal Georgia, adjacent South Carolina, and northeast Florida; west-central Florida; and panhandle Florida. Saltwater encroachment as a result of pumping has occurred locally in coastal areas. Pumpage from the Upper Floridan aquifer is supplied primarily by reduction of natural discharge and by increased recharge rather than by depletion of aquifer storage. About 20 percent is from reduced discharge to springs, streams, and lakes, about 20 percent is from reduced upward leakage, and about 60 percent is from increased recharge. Compared to predevelopment conditions, discharge to springs, streams, and lakes is reduced by less than 5 percent, upward leakage is reduced by about 30 percent, and recharge is increased by about 12 percent. Total recharge and, therefore, discharge increased from a predevelopment rate of 21,500 cubic feet per second to about 24,100 cubic feet per second by 1980. A considerable area remains of the Floridan aquifer system where large ground-water supplies may be developed. This area is largely inland from the coasts and characterized by high transmissivity and minimal development prior to the early 1980's. The major constraint on future development probably is degradation of water quality rather than water-quantity limitations.

Alabama, Florida, Georgia, South Carolina↗
USGS1992

Hydrogeology of the Cambrian-Ordovician aquifer system in the northern Midwest, United States with a section on ground-water quality

The Cambrian-Ordovician aquifer system contains the most extensive and continuous aquifers in the northern Midwest of the United States. It is the source of water for many municipalities, industries, and rural water users. Since the beginning of ground-water development from the aquifer system in the late 1800's, hydraulic heads have declined hundreds of feet in the heavily pumped Chicago-Milwaukee area and somewhat less in other metropolitan areas. The U.S. Geological Survey has completed a regional assessment of this aquifer system within a 161,000-square-mile area encompassing northern Illinois, northwestern Indiana, Iowa, southeastern Minnesota, northern Missouri, and Wisconsin. Consolidated sedimentary rocks in the northern Midwest range in age from Precambrian to Cretaceous and crop out in generally concentric, arcuate patterns, dipping away from structural highs (arches) on the Precambrian basement in northern Minnesota and Wisconsin toward structural lows (basins) to the south and east. The sedimentary bedrock is generally overlain by a veneer of glacial drift. Thickness of the sedimentary sequence increases to about 5,000 feet in the Forest City basin of southwestern Iowa and to about 14,000 and more than 15,000 feet in the Illinois and Michigan basins, respectively. Cambrian and Ordovician age rocks, mainly marine sandstone and carbonate rocks, compose much of the sedimentary sequence and form the Cambrian-Ordovician aquifer system. The aquifer system lies on the Precambrian basement, regarded as a regional confining unit. Six hydrogeologic units are defined; they are arranged as alternating pairs of an aquifer and an overlying confining. unit. The units are named using the predominant geologic nomenclature of the upper Mississippi Valley, which includes most of the study area. In the southern quarter of the area, the hydrogeologic units consist of equivalent formations of the Ozark area (mostly carbonate rocks). The uppermost part of the aquifer system is the Maquoketa confining unit, which consists of the Maquoketa Shale and the underlying dolomite and shale of the Galena Dolomite and the Decorah, Platteville, and Glenwood Formations. The underlying St. Peter-Prairie du Chien-Jordan aquifer is an important source of ground water in the western part of the area in Iowa and Minnesota, where the uniform Jordan Sandstone is hydraulically connected to overlying fractured dolomite of the Prairie du Chien Group. The unit is less important in the eastern part of Wisconsin and Illinois because the Jordan Sandstone is absent and the Prairie du Chien Group is thin or absent due to pre-St. Peter Sandstone erosion. Equivalent rocks in northern Missouri-the Roubidoux Formation and the Gasconade and Eminence Dolomites-are mainly carbonate rocks that are somewhat permeable and contain some sandstone. The St. Lawrence and Franconia Formations underlying the St. Peter-Prairie du Chien-Jordan aquifer consist generally of silty and shaly, fine-grained, poorly sorted, and dolomitic sandstones that restrict vertical movement of ground water and form a regional confining unit. In the southern and eastern parts of the area, the Potosi and Derby-Doerun Dolomites and the upper part of the Davis Formation are the equivalent rocks (mainly carbonate rocks). In the east-central part of the area in Illinois and Wisconsin, the Ironton-Galesville aquifer forms the most important aquifer of the Cambrian-Ordovician aquifer system, contributing about one-third of the yield from wells in the aquifer system in the Chicago area. The aquifer terminates to the west, south, and east, where the sandstones grade into less permeable carbonate rocks in central Iowa, central Illinois, and northwestern Indiana, respectively. The underlying Eau Claire Formation and its partial equivalent to the southwest, the Bonneterre Formation, form an important confining unit above the Mount Simon aquifer throughout much of the study area. Siltstone and shale are fairly common in the upper part of the Eau Claire Formation but less so in its northernmost extent in Wisconsin. Dolomite content increases southward and westward, where a middle dolomite facies grades laterally into the Bonneterre in Missouri, southwestern Minnesota, extreme south-central Wisconsin, and possibly in western Iowa. The basal unit in the Cambrian-Ordovician aquifer system, the Mount Simon aquifer, is present throughout the study area, except where it is absent over local highs of the Precambrian basement. It consists primarily of the Mount Simon Sandstone in the north and its equivalent in northern Missouri, the Lamotte Sandstone. The underlying Hinckley Sandstone of Precambrian age is included in Minnesota, as is the overlying Elmhurst Sandstone Member of the Eau Claire Formation in northern Illinois. The aquifer increases greatly in thickness and the water is progressively more saline away from the northern structural highs toward the basins. Much of the movement and discharge of ground water in the northern Midwest occurs in local, unconfined, shallow flow systems within a few miles of points of recharge. The rest of the water is semiconfined or confined in intermediate or regional flow systems within the bedrock, where flow is deeper, slower, and traverses much longer distances from recharge areas to discharge areas. The major areas of recharge to regional confined flow are in northwestern Iowa, southeastern Minnesota, western, southern, and eastern Wisconsin, and northern Illinois. Although the rate of flow is small, significant recharge to the Cambrian-Ordovician aquifer system also occurs as leakage through the Maquoketa confining unit, where the vertical hydraulic gradient is downward. Ground water in much of the confined aquifer system moves laterally from recharge areas toward the major river valleys and Lake Michigan or down dip toward the structural basins. The longest flow paths extend as much as 400 miles from northwestern Iowa southeast toward the Illinois basin or to the Mississippi River and Missouri River valleys near their confluence. Other major confined flow is from eastern Wisconsin toward the Michigan basin and southward flow from northeastern Illinois toward the Illinois basin. Regional ground-water discharge from the aquifer system is mainly diffuse upward leakage from confined aquifers along flow paths toward the structural basins. Very saline water around and brines within the basins restrict regional flow into the basins, forcing ground water to discharge upward. Water in intermediate flow systems discharges upward to the major river valleys. Original heads of more than 100 feet above land surface were recorded in the aquifer system near Lake Michigan in eastern Wisconsin and at Dubuque, Iowa, along the Mississippi River. The Cambrian-Ordovician aquifer system was developed rapidly in the late 1800's after the first deep well was drilled in Chicago in 1864. Many flowing wells were not controlled, which caused water levels in deep wells to decline, and many no longer flowed by the early 1900's. Heads in the aquifers have declined very little in most of the recharge or unconfined areas since ground-water withdrawal began, but major declines have occurred in confined areas. The largest declines in head are at Chicago, Illinois, Milwaukee and Green Bay, Wisconsin, and Mason City, Iowa, where the aquifer system is confined by the Maquoketa confining unit. The composite head in the aquifer system declined more than 900 feet in the deepest cones of depression in the Chicago area from 1864 to 1980 and about 375 feet in the cone at Milwaukee from 1880 to 1980. More than 200 feet of decline has occurred at Mason City. The head declined as much as 440 feet in Green Bay from 1886 to 1957, when the city discontinued use of its deep wells and began using water from Lake Michigan. The largest centers of pumping are in the Chicago and Twin Cities (Minneapolis-St. Paul, Minnesota) metropolitan areas about 180 million gallons per day each in 1980. Pumpage exceeded 10 million gallons per day in only a few other areas in 1980. Ground water in the Cambrian-Ordovician aquifer system in the northern Midwest is characterized by an extreme range of mineralization, but its quality in most of the area is good. The major cations are calcium, magnesium, and sodium, and the major anions are bicarbonate, sulfate, and chloride. Sodium, sulfate, and chloride distributions are closely related to the distribution pattern of dissolved solids but not in the same proportion. Dissolved-solids concentration is generally less than 1,000 milligrams per liter in the recharge areas of Wisconsin, southern Minnesota, northeastern Iowa, and north-central Illinois where the aquifer system crops out or subcrops beneath glacial drift. Ground water there is the Ca-Mg-HC03 type, derived from and identical to that in the overlying glacial drift. In northwestern Iowa and southwestern Minnesota, the water in both the glacial drift and the Cambrian-Ordovician aquifer system is a Ca-Na-S04HC03 type, derived from oxidation of pyrite in the overlying Cretaceous Dakota Formation. Transition to higher dissolved solids in the confined areas commonly is accompanied by increased sulfate concentration and· the occurrence of Ca-Na-S04-type water. Salinity of the ground water increases progressively toward the .basins, where dissolved solids exceed 200,000 milligrams per liter. Saline water is present in the Mount Simon aquifer near Lake Michigan in eastern Wisconsin and northeastern Illinois but occurs in successively younger rocks to the east and south as they dip toward the basins. Similarly, salinity increases down dip in Iowa to the southwest and south; however, regional ground-water flow in Iowa is from northwest to southeast. Much of the ground water in the confined aquifer system is isotopically depleted in 0180 and OD with respect to modern precipitation-an indication that the water originated as precipitation in a much colder climate than the present and probably was derived from recharge of glacial meltwater. On the basis of o34S values for sulfur in sulfate, it is believed that isostatic loading from glacial ice over the Michigan basin reversed the hydraulic gradient to trend westward, opposite from the present gradient, causing saline water in the Michigan basin to discharge westward through the present recharge areas. Natural water-quality problems in the Cambrian-Ordovician aquifer system are mainly the high dissolved-solids concentrations and associated high concentrations of sulfate and chloride, which limit the use of the water for municipal and domestic purposes in much of the confined aquifer system in central and southern Illinois, Indiana, southern and western Iowa, and northern Missouri. Another concern is that radium activity exceeds normal background concentrations of a few picocuries per liter in much of the confined aquifer system in eastern Wisconsin, northeastern Illinois, and central Iowa. Other common problems are high hardness and locally excessive concentrations of iron and hydrogen sulfide.

Iowa, Illinois, Indiana, Michigan, Minnesota, Miss↗
USGS1996

Hydrogeologic terranes and potential yield of water to wells in the Valley and Ridge Physiographic Province in the eastern and southeastern United States

The Valley and Ridge Physiographic Province is underlain by deformed sedimentary rock of Paleozoic age including dolomite, limestone, shale, and sandstone. Regolith (soil, sediment, and weathered rock) covers the Paleozoic rock throughout most of the province. Local differences in lithology, structure, and weathering can result in four orders of magnitude variation in the water-yielding properties of the geologic units that underlie the area. Selected rock types, however, can account for a substantial part of this variation because of the unique way in which these dense, consolidated sedimentary rock types deform and weather to produce secondary openings. On the basis of relations among rock type, water-yielding openings, and water-yielding properties (as indicated by specific capacity), the regolith and consolidated rock were classified and mapped as five hydrogeologic terranes alluvium, dolomite, limestone, argillaceous carbonate rock, and siliciclastic rock. The hydrogeologic terranes are named after the predominant outcrop lithology within them. The western toe of the Blue Ridge Mountains is classified as a subdivision of the dolomite hydrogeologic terrane that may produce yields of water in excess of 1,000 gallons per minute (gal/min) to public and industrial supply wells. Specific-capacity data for homogeneous data sets, which consist of all wells that have the same characteristics in regard to casing diameter, primary use of the water, and topographic setting, revealed significant differences in water-yielding properties among the five hydrogeologic terranes. According to results of Tukey statistical tests at a probability (alpha level) of 0.05, 8 out of 10 pairs of hydrogeologic terranes (for example, alluvium/limestone) had significantly different median specific-capacity values. The median value for public and industrial supply wells in the western toe is three times greater than the value for comparable wells in the dolomite hydrogeologic terrane elsewhere. Estimates of potential yields to public and industrial supply wells were calculated from specific-capacity data for most-productive wells, which have casing diameter of 7 in. or more, discharge water primarily for public or industrial supply, and are in a valley. Median constant drawdowns, calculated from reported drawdowns, were assumed to be between 10 and 90 ft for wells completed in each of the five hydrogeologic terranes, and well-entrance losses were assumed to be negligible. Estimated interquartile ranges in potential yields to 412 mostproductive wells in the five hydrogeologic terranes were 170 to 580 gal/min, alluvium; 210 to 1,400 gal/min, dolomite; 80 to 720 gal/min, limestone; 65 to 850 gal/min, argillaceous carbonate rock; and 70 to 280 gal/min, siliciclastic rock.

Alabama, Georgia, Maryland, New Jersey, Pennsylvan↗
USGS1990

Stratigraphy of the Mesaverde Group in the central and eastern greater Green River basin, Wyoming, Colorado, and Utah

This paper establishes a stratigraphic framework for the Mesaverde Group, nearly 5,000 ft thick, in the central and eastern greater Green River basin based on data from measured outcrop sections and drill holes. Stratigraphic correlations are supported by ammonite zonation. No new stratigraphic names are introduced, and no nomenclature problems are discussed. Five long measured sections through the Mesaverde Group are described. The lower part of the Mesaverde Group, comprising the Rock Springs, Blair, Haystack Mountains, Allen Ridge, and Iles Formations, was deposited during a major eastward regression of the interior Cretaceous seaway of North America during the late Santonian and early Campanian. This regression was followed by regional uplift of the central Rocky Mountain area during the middle Campanian. The regional uplift was accompanied by widespread nondeposition and erosion, which, in turn, were followed by deposition of the Ericson and Pine Ridge Sandstones. The upper part of the Mesaverde Group, comprising the Almond and Williams Fork Formations, was deposited during a major westward transgression of the interior seaway in the early Maestrichtian. The major marine transgressions and regressions of the interior seaway were caused by eustatic changes of sea level, whereas intervening periods of nondeposition and erosion resulted from tectonism in the Sevier orogenic belt west of the study area. Formations of the Mesaverde Group are composed of sediments deposited in a landward-seaward progression of alluvial-plain, floodplain, coastal-plain, barrier-plain, tidal-flat, delta-plain, marine-shoreline, and marine-shelf and slope depositional environments. Each of these depositional environments is represented by specific lithofacies, sedimentary structures, and fossils, which are characteristic of depositional settings determined by water salinity, water depth, sedimentary and diagenetic processes, and the nature of sediment source terranes. The Mesaverde Group was deposited mainly along the western margins of the interior Cretaceous seaway as marine shorelines that trended north to northeast across the study area. Arcuate deltas, which formed at the mouths of major rivers along these shorelines, spread eastward onto shallow marine shelves. Embayed shoreline areas between the deltas were the sites of barrier-island and tidal-flat deposition. Alluvial-plain, flood-plain, and coastal-plain environments were present inland. The marine shorelines were tidally influenced and wave dominated, and shoreline deposits were mostly thick, linear sheets of quartzose sandstone. Deposition was largely controlled by the emergence or submergence of shoreline areas. Stillstands occurred close to local transgressions and regressions, depending on rates of sedimentation and subsidence.

Professional Paper↗
USGS1990

The San Andreas Fault System, California

Maps of northern and southern California printed on flyleaf inside front cover and on adjacent pages show faults that have had displacement within the past 2 million years. Those that have had displacement within historical time are shown in red. Bands of red tint emphasize zones of historical displacement; bands of orange tint emphasize major faults that have had Quaternary displacement before historical time. Faults are dashed where uncertain, dotted where covered by sedimentary deposits, and queried when doubtful. Arrows indicate direction of relative movement; sawteeth on upper plate of thrust fault. These maps are reproductions, in major part, of selected plates from the "Fault Map of California," published in 1975 by the California Division of Mines and Geology at a scale of 1:750,000; the State map was compiled and data interpreted by Charles W. Jennings. New data about faults, not shown on the 1975 edition, required modest revisions, primarily additions however, most of the map was left unchanged because the California Division of Mines and Geology is currently engaged in a major revision and update of the 1975 edition. Because of the reduced scale here, names of faults and places were redrafted or omitted. Faults added to the reduced map are not as precise as on the original State map, and the editor of this volume selected certain faults and omitted others. Principal regions for which new information was added are the region north of the San Francisco Bay area and the offshore regions. Many people have contributed to the present map, but the editor is solely responsible for any errors and omissions. Among those contributing informally, but extensively, and the regions to which each contributed were G.A. Carver, onland region north of lat 40°N.; S.H. Clarke, offshore region north of Cape Mendocino; R.J. McLaughlin, onland region between lat 40°00' and 40°30' N. and long 123°30' and 124°30' W.; D.S. McCulloch offshore region between lat 35° and 40° N.; J.G. Vedder, offshore reglor south of lat 35° N.; and D.G. Herd, southern San Francisco Bay region. The Fault Evaluation Program of the California Division of Mines and Geology under the direction of E.W. Hart, provided much data about many faults. Unpublished material about the Bartlett Springs fault zone that was gathered by Geomatrix Consultants for the Pacific Gas and Electric Co. was very useful. In addition, selected publications that provided invaluable data include Bortugno (1982), Herd (1977), Herd and Helley (1977), Pampeyan and others (1981), and Yerkes and others (1980).

California↗
USGS1996

Stratigraphy, structure, and graptolites of an Ordovician and Silurian sequence in the Terra Cotta Mountains, Alaska Range, Alaska

The geology and graptolite faunas of the Terra Cotta Mountains in south-central Alaska are described. Three new formations of Paleozoic age are named and described; they include graptolitiferous argillaceous rocks, sandstones, and limestones of the Dillinger Terrane. The structure and tectonics of the mapped area arc also discussed. Ninety-five species of Ordovician and Silurian graptolites, including four new species, are described and illustrated. The faunal succession is divided into nine Ordovician and ten Silurian biostratigraphic zones and is correlated with graptolite faunas found elsewhere.

Professional Paper↗
USGS2000

Revision of middle Proterozoic Yellowjacket Formation, central Idaho, and revision of Cretaceous Slim Sam Formation, Elkhorn Mountains area, Montana

The Yellowjacket Formation is restricted to the strata originally assigned to it by Ross (1934). The Yellowjacket, the conformably overlying Hoodoo Quartzite, and succeeding unnamed argillaceous quartzite unit form a genetically related sequence that lies in a structural block delimited on the northeast by the Iron Lake fault. Directly northeast of the fault, strata currently assigned by others to the lower subunit of the Yellowjacket are correlated with the Apple Creek Formation in the Lemhi Range. Mapping in the western part of the Lemhi Range shows that the Apple Creek Formation lies depositionally above the Big Creek Formation and that no rocks of the Yellowjacket-Hoodoo unnamed unit stratigraphic sequence are present. In contrast, in the area of the Yellowjacket mapped by Ross (1934) and the area directly northeast of the Iron Lake Fault, the Big Creek Formation is absent, even though it is 2,700 m thick in the Lemhi Range. These data indicate that the Iron Lake Fault juxtaposed the Yellowjacket-Hoodoo-unnamed unit sequence against non-Yellowjacket strata to the northeast. The Upper Cretaceous Slim Sam Formation of the Elkhorn Mountains area is revised. Strata of the lower part are correlated with the regionally recognized marine Telegraph Creek Formation and the overlying marine to marginal marine Eagle Sandstone. Only lower strata of the Eagle are present in the study area and they are preserved discontinously. The nonmarine volcanic and volcaniclastic rocks of the upper part of the Slim Sam as originally defined retain the name Slim Sam Formation. These rocks, mainly of sedimentary origin, are genetically related to the Elkhorn Mountains Volcanics. The lower contact of the Slim Sam (restricted) is unconformable above the Eagle Sandstone or more commonly above the Telegraph Creek Formation. The upper contact is conformable with the Elkhorn Mountains Volcanics.

Idaho, Montana↗
USGS2005

Petrography, structure, age, and thermal history of granitic coastal plain basement in the Chesapeake Bay impact structure, USGS-NASA Langley core, Hampton, Virginia

The USGS-NASA Langley corehole at Hampton , Va., was drilled in 2000 and was the first corehole to reach coastal plain basement in the late Eocene Chesapeake Bay impact structure . The Langley core provided samples of granite that had been concealed by 626.3 meters (2,054.7 feet) of preimpact, synimpact, and postimpact sediments. The granite, here named the Langley Granite, is pale red, medium grained, massive, and homogeneous in composition and fabric. It has a peraluminous composition (alumina saturation index 1.1) and a seriate-inequigranular, hypidiomorphic, isotropic fabric. A pervasive secondary mineral assemblage of chlorite + albite + clinozoisite is consistent with either deuteric alteration or lower greenschist-facies metamorphism. Chlorite, the principal mafic mineral, occurs as tabular masses that suggest pseudomorphous replacement of biotite. The top of the granite is weathered but not saprolitized and is nonconformably overlain by Lower Cretaceous clastic sediments. A SHRIMP 206 Pb/ 238 U weighted average zircon age of 612±10 Ma (2σ) indicates Neoproterozoic crystallization of the Langley Granite. The 40 Ar/ 39 Ar ages of microcline and plagioclase are consistent with regional cooling and uplift after the late Paleozoic Alleghanian orogeny. Zircon and apatite fission-track cooling ages of 375±44 Ma and 184±32 Ma (2σ), respectively, indicate no discernible impact -related thermal disturbance at the Langley corehole location in the annular trough of the structure about 19 kilometers (12 miles) outside the margin of the central crater. Modeling the apatite fission-track data places upper limits on the impact -related heating at this location. For an impact -related thermal disturbance equivalent to a modeled thermal spike having a duration of 1 to 0.1 million years, temperatures in this part of the impact structure could not have been higher than about 100°C-120°C. Most fractures, faults, and veins in the Langley Granite contain lower greenschist-facies minerals and are inferred to predate the impact . No shock-metamorphosed minerals or other features clearly attributable to the impact were found in the granite. Studies of the granite provide a glimpse into the nature of crystalline terranes beneath the Atlantic Coastal Plain and Chesapeake Bay and provide limits on the geographic extent of impact -generated shock and thermal effects.

Chesapeake Bay↗
USGS2014

Coal and petroleum resources in the Appalachian basin: index maps of included studies

This chapter B.1 of U.S. Geological Survey (USGS) Professional Paper 1708 provides index maps for many of the studies described in other chapters of the report. Scientists of the USGS and State geological surveys studied coal and petroleum resources in the central and southern Appalachian structural basins. In the southern Appalachian basin, studies focused on the coal-bearing parts of the Black Warrior basin in Alabama. The scientists used new and existing geologic data sets to create a common spatial geologic framework for the fossil-fuel-bearing strata of the central Appalachian basin and the Black Warrior basin in Alabama. Digital data have been compiled into a geographic information system (GIS) that is included in chapter I.1 (Trippi and others, this volume). Shape files and related metadata for features shown in the index maps of this chapter can be downloaded from chapter I.1. The study area for the Appalachian basin resource framework study includes the fossil-fuel-bearing strata of the following States (listed alphabetically): Alabama, Kentucky, Maryland, New York, Ohio, Pennsylvania, Tennessee, Virginia, and West Virginia. The outline of the study area is shown in figure 1; it differs from the boundary of the Appalachian Basin Province (Province 67) defined for the 1995 National Oil and Gas Assessment (NOGA) by the U.S. Geological Survey (1996a). The difference is that the study area includes regions where the Pennsylvanian coal-bearing strata crop out but does not include all of the oil- and gas-bearing strata of the Black Warrior basin, Alabama. The reasons for providing the index maps in this chapter are to show the locations of different studies, to give an overview of topics covered, and to help the user choose which chapter to read. Figures 1 and 2 show the study area outline and county names. Figure 3 shows oil and gas production in 1995 and 2005. Figure 4 shows locations of Upper Devonian sandstone oil and gas fields. Figure 5 shows major coal regions and coal fields. Figure 6 shows coal production by county. Figure 7 shows the locations of 10 cross sections of regional extent through the subsurface of the Appalachian basin. Figure 8 shows conodont alteration index sample locations and interpreted isograds for Ordovician rocks. Figure 9 shows vitrinite-reflectance data for Pennsylvanian coal in the Appalachian basin. Figure 10 shows the locations of coalbed-methane (CBM) assessment units in the study area, and figure 12 shows counties producing CBM. Figure 12 shows sulfur content of coal delivered to powerplants from coal-producing counties in the Appalachian basin and Black Warrior basin. Figure 13 shows locations of wells in Ohio and Pennsylvania where oil and gas were sampled in Lower Silurian reservoirs. Figure 14 shows the Conasauga-Rome/Conasauga Total Petroleum System and selected wells in the Rome trough in Kentucky and West Virginia having oil and gas production and shows. Figure 15 shows the locations of samples from Silurian reservoirs in Kentucky, New York, Ohio, Pennsylvania, and West Virginia; the samples yielded total organic carbon data. Figure 16 shows the locations of the Ben Hur and Rose Hill oil fields, Virginia, and the Swan Creek oil field, Tennessee. The one index map that is not shown is the areal extent of the shale gas plays in the basin. The extents of the plays can be found in Coleman and others (this volume, chap. G.13).

Appalachian basin↗
USGS2014

Assessment of Appalachian basin oil and gas resources: Utica-Lower Paleozoic Total Petroleum System

The Utica-Lower Paleozoic Total Petroleum System (TPS) in the Appalachian Basin Province is named for the Upper Ordovician Utica Shale, which is the source rock, and for multiple lower Paleozoic sandstone and carbonate units that are the important reservoirs. The total organic carbon (TOC) values for the Utica Shale are usually greater than 1 weight percent. TOC values ranging from 2 to 3 weight percent outline a broad, northeast-trending area that extends across western and southern Pennsylvania, eastern Ohio, northern West Virginia, and southeastern New York. The Utica Shale is characterized by type II kerogen, which is a variety of kerogen that is typically prone to oil generation. Conondont color-alteration index (CAI) isograds, which are based on samples from the Upper Ordovician Trenton Limestone (or Group), indicate that a pod of mature Utica Shale source rocks occupies most of the TPS. The following strata (in ascending stratigraphic order) are the most important reservoir rocks for oil and gas in the Utica-Lower Paleozoic TPS: (1) the Upper Cambrian Copper Ridge dolomite in Ohio; (2) the Upper Cambrian Rose Run sandstone in Ohio; (3) the Upper Ordovician Black River Limestone (or Group) and Trenton Limestone in New York, West Virginia, and Ohio; (4) the Lower Silurian “Clinton” sandstone, Medina sandstone, Medina Group sandstones, and Tuscarora Sandstone in Ohio, Pennsylvania, New York, and West Virginia; and (5) the Lower and Upper Silurian Lockport Dolomite (also known as the Newburg zone) in Ohio. Strata containing oil and gas reservoirs of secondary importance are sandstone reservoirs in the Upper Ordovician Queenston Shale in New York, the Upper Ordovician Bald Eagle Sandstone in Pennsylvania, and the Upper Silurian Williamsport Sandstone (also known as the Newburg sandstone) in West Virginia. The Upper Ordovician Utica Shale may be an important gas and oil(?) reservoir in the future. In about 2011, after this report was written, commercial natural gas and oil was discovered in the Utica Shale in eastern Ohio. Both conventional oil and gas resources and continuous (unconventional) gas resources are present in the UticaLower Paleozoic TPS. Conventional oil and gas resources in the Utica-Lower Paleozoic TPS were assessed by the U.S. Geological Survey (USGS) in 2002 in the following assessment units (AU): (1) the Lower Paleozoic Carbonates in Thrust Belt AU, (2) the Knox Unconformity AU, (3) the Black River-Trenton Hydrothermal Dolomite AU, and (4) the Lockport Dolomite AU. The total estimated undiscovered oil and gas resources for these four AUs, at a mean value, was about 46 million barrels of oil (MMBO) and about 3 trillion cubic feet of gas (TCFG), respectively. In contrast, continuous (unconventional) gas resources in the TPS were assessed by the USGS in 2002 in four AUs associated with the “Clinton” sandstone, Medina sandstone, Medina Group sandstones, Tuscarora Sandstone, and sandstones in the Queenston Shale. The total estimated undiscovered gas for these four AUs, at a mean value, was about 26.8 TCFG. A hypothetical Utica Shale AU for oil(?) and continuous gas is identified in this report. In 2012, the Utica Shale was recognized by the USGS as a continuous AU and was assessed by Kirschbaum and others (2012).

Appalachian basin, Utica-Lower Paleozoic Total Pet↗
USGS2005

26 km of offset on the Lake Clark fault since late Eocene time

Aeromagnetic data over the Lake Clark Fault reveal a north-trending band of magnetic anomalies that are right-laterally offset about 26 km across the fault. The magnetic anomalies correlate spatially with a belt of dated 34-39-Ma granitic plutons. Thus, the Lake Clark Fault has had ~26 km of right-lateral offset in the past 34-39 Ma. The Castle Mountain Fault, which lies along the strike of the Lake Clark Fault to the east-northeast, must have had a similar or, possibly, greater amount of offset. We infer the presence of an additional right-lateral strike-slip fault about 35 km northwest of the Lake Clark Fault, herein named the 'Telequana Fault,' on the basis of 11 km of right-lateral offset of a north-trending band of magnetic anomalies.

Professional Paper↗
USGS2009

Petroleum systems used to determine the assessment units in the San Joaquin Basin Province, California

For the San Joaquin Basin Province in California (fig. 8.1), six petroleum systems were identified, mapped, and described to provide the basis for the five total petroleum systems (TPS) and ten related assessment units (AU) used in the 2003 U.S. Geological Survey (USGS) National Oil and Gas Assessment (table 8.1; Gautier and others, 2004; Hosford Scheirer, 2007). The petroleum pools in the province were allocated to each petroleum system on the basis of (1) geochemical composition as described by Lillis and Magoon (this volume, chapter 9) and Lillis and others (this volume, chapter 10), (2) reservoir rock nomenclature (fig 8.2; appendix 8.1 and appendix 8.2) as described by Hosford Scheirer and Magoon (this volume, chapter 5), and (3) the volume of oil and gas discovered for each petroleum system by system, flank, and trap type (tables 8.2, 8.3 and 8.4). For this assessment, each petroleum system was determined, followed by the TPS from one or more petroleum systems. For example, the Miocene TPS includes two petroleum systems, the McLure-Tulare(!) and Antelope-Stevens(!) (notation described in Petroleum System Name section, below). Magoon and Schmoker (2000) describe how the TPS is used in this and the USGS world assessments. This chapter describes the six petroleum systems used to make five total petroleum systems in this San Joaquin Basin Province assessment. The figures and tables for each petroleum system and TPS are as follows: (1) the San Joaquin(?) petroleum system or the Neogene Nonassociated Gas TPS is a natural gas system in the southeast part of the province (figs. 8.3 through 8.8; table 8.5; this volume, chapter 22); (2) the Miocene TPS (this volume, chapters 13, 14, 15, 16, and 17) includes the McLure-Tulare(!) petroleum system north of the Bakersfield Arch (figs. 8.9 through 8.13; table 8.6), and the Antelope-Stevens(!) petroleum system south of the arch (figs. 8.14 through 8.18; table 8.7), and is summarized in figure 8.19; (3) the Eocene TPS (this volume, chapters 18 and 19) combines two petroleum systems, the Tumey-Temblor(.) covering much of the province (figs. 8.20 through 8.24; table 8.8) and the underlying Kreyenhagen-Temblor(!) (figs. 8.25 through 8.29: table 8.9), and is summarized in figure 8.30; (4) the Eocene-Miocene Composite TPS, formed by combining the Miocene and Eocene TPS (this volume, chapter 20); and (5) the Moreno-Nortonville(.) is both a petroleum system and a TPS consisting mainly of natural gas in the northern part of the province (figs. 8.31 through 8.36: table 8.10; this volume, chapter 21). Oil samples with geochemistry from surface seeps and wells used to map these petroleum systems are listed in table 8.11. Finally, the volume of oil and gas expelled by each pod of active source rock was calculated and compared with the discovered hydrocarbons in each petroleum system (figs. 8.37 through 8.39; tables 8.12 and 8.13).

California↗
USGS2008

The Gogebic Iron Range — A sample of the northern margin of the Penokean fold and thrust belt

The Gogebic iron range is an elongate belt of Paleoproterozoic strata extending from the west shore of Lake Gogebic in the upper peninsula of Michigan for about 125 km westward into northern Wisconsin. It is one of six major informally named iron ranges in the Lake Superior region and produced about 325 million tons of direct-shipping ore between 1887 and 1967. A significant resource of concentrating-grade ore remains in the western and eastern parts of the range. The iron range forms a broad, gently southward-opening arc where the central part of the range exposes rocks that were deposited somewhat north of the eastern and western parts. A fundamental boundary marking both the tectonic setting of deposition and the later deformation within the Penokean orogen lies fortuitously in an east-west direction along the range so that the central part of the range preserves sediments deposited north of that boundary, whereas the eastern and western parts of the range were deposited south of the boundary. Thus, the central part of the range provides a record of sedimentation and very mild deformation in a part of the Penokean orogen farthest from the interior of the orogen to the south. The eastern and western parts of the range, in contrast, exhibit a depositional and deformational style typical of parts closer to the interior of the orogen. A second fortuitous feature of the iron range is that the entire area was tilted from 40° to 90° northward by Mesoproterozoic deformation so that the map view offers an oblique cross section of the Paleoproterozoic sedimentary sequence and structures. Together, these features make the Gogebic iron range a unique area in which to observe (1) the lateral transition from deposition on a stable platform to deposition in a tectonically and volcanically active region, and (2) the transition from essentially undeformed Paleoproterozoic strata to their folded and faulted equivalents. Paleoproterozoic strata in the Gogebic iron range are part of the Marquette Range Supergroup. They were deposited unconformably on Neoarchean rocks consisting of a diverse volcanic suite (the Ramsay Formation) which was intruded by granitic rocks of the Puritan Quartz Monzonite. The Marquette Range Supergroup in this region consists of a basal sequence of orthoquartzite (Sunday Quartzite) and dolomite (Bad River Dolomite), both of which are part of the Chocolay Group. The group is preserved only in the eastern and western parts of the range but was probably present throughout before the erosion interval that separated it from the overlying Menominee Group. The Menominee Group consists of basal clastic rocks (Palms Formation) that grade upward into the Ironwood Iron-Formation, which is the principal iron-bearing unit of the range. The Ironwood interfingers with the Emperor Volcanic Complex in the eastern part of the range and with volcanic rocks and gabbro in the western part of the range. The Ironwood is overlain unconformably by the Tyler Formation in the central and western parts of the range and by the Tyler’s equivalent, the Copps Formation, in the eastern part of the range. Strata in the central part of the iron range are entirely sedimentary. Deposition occurred in a relatively stable tectonic setting, at least until the deposition of the Tyler Formation. The Tyler consists largely of turbidites deposited in a foreland basin in advance of accreting volcanic arcs to the south. Penokean deformation in the central part of the range was very minor; the evidence of deformation consists of steep faults with small offsets and a few bedding-parallel faults that also have small offsets and that are recognized only in mine workings. In both the eastern and western parts of the iron range, abrupt facies changes mark a passage into a more tectonically and volcanically active belt. These relationships are especially well displayed in the east where a graben, the Presque Isle trough, began to subside during deposition of the Ironwood Iron-Formation. The thickness of the Ironwood increases into the graben and its internal stratigraphy also changes. The most prominent changes in the graben are the presence of a thick volcanic unit, the Emperor Volcanic Complex of the Menominee Group, and comagmatic gabbro sills that interfinger with the Ironwood. In the western part of the range, volcanic rocks and comagmatic gabbro sills are also present in the Ironwood, but a graben that is equivalent to the Presque Isle trough is not evident. Penokean structures are well developed in both the eastern and western parts of the iron range. They consist of folds ranging from outcrop to regional scale and thrust faults which, in places, either repeated the section or detached it from Neoarchean basement. The sharp transition from the little-deformed central part of the range to the more intensely deformed eastern and western parts coincides closely with the earlier developed transition from the stable sedimentary setting in the central part to the tectonically active sedimentation in the east and west parts. The extensional structures that formed during sedimentation may have helped to control the extent of later Penokean compressional structures.

Michigan, Wisconsin↗
USGS2007

Geochemical and sulfur-isotopic signatures of volcanogenic massive sulfide deposits on Prince of Wales Island and vicinity, southeastern Alaska

Stratabound volcanogenic massive sulfide (VMS) deposits on Prince of Wales Island and vicinity, southeastern Alaska, occur in two volcanosedimentary sequences of Late Proterozoic through Cambrian and of Ordovician through Early Silurian age. This study presents geochemical data on sulfide-rich samples, in situ laser-ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) of sulfide minerals, and sulfur-isotopic analyses of sulfides and sulfates (barite) for identifying and distinguishing between primary sea-floor signatures and later regional metamorphic overprints. These datasets are also used here in an attempt to discriminate the VMS deposits in the older Wales Group from those in the younger Moira Sound unit (new informal name). The Wales Group and its contained VMS deposits have been multiply deformed and metamorphosed from greenschist to amphibolite grade, whereas the Moira Sound unit and related VMS deposits are less deformed and generally less metamorphosed (lower to middle greenschist grade). Variations in the sulfide mineral assemblages and textures of the VMS deposits in both sequences reflect a combination of processes, including primary sea-floor mineralization and sub-sea-floor zone refining, followed by metamorphic recrystallization. Very coarse grained (>1 cm diam) sulfide minerals and abundant pyrrhotite are restricted to VMS deposits in a small area of the Wales Group, at Khayyam and Stumble-On, which record high-grade metamorphism of the sulfides. Geochemical and sulfur-isotopic data distinguish the VMS deposits in the Wales Group from those in the Moira Sound unit. Although base- and precious-metal contents vary widely in sulfide-rich samples from both sequences, samples from the Moira Sound generally have proportionately higher Ag contents relative to base metals and Au. In situ LA-ICP-MS analysis of trace elements in the sulfide minerals suggests that primary sea-floor hydrothermal signatures are preserved in some samples (for example, Mn, As, Sb, and Tl in pyrite from the Moira Sound unit), whereas in other samples the signatures are varyingly annealed, owing to metamorphic overprinting. A limited LA-ICP-MS database for sphalerite indicates that low-Fe sphalerite is preferentially associated with the most Au rich deposits, the Niblack and Nutkwa. Sulfur-isotopic values for sulfide minerals in the VMS deposits in the Wales Group range from 5.9 to 17.4 permil (avg 11.5?2.7 permil), about 5 to 6 permil higher than those in the Moira Sound unit, which range from -2.8 to 10.4 permil (avg 6.1?4.0 permil). This difference in 34Ssulfide values reflects a dominantly seawater sulfate source of the sulfides and is linked to the 34S values of contemporaneous seawater sulfate, which were slightly higher during the Late Proterozoic through Cambrian than during the Ordovician through Early Silurian.

Alaska↗
USGS2005

Oceanic Pb-isotopic sources of Proterozoic and Paleozoic volcanogenic massive sulfide deposits on Prince of Wales Island and vicinity, southeastern Alaska

Volcanogenic massive sulfide (VMS) deposits on Prince of Wales Island and vicinity in southeastern Alaska are associated with Late Proterozoic through Cambrian volcanosedimentary rocks of the Wales Group and with Ordovician through Early Silurian felsic volcanic rocks of the Moira Sound unit (new informal name). The massive sulfide deposits in the Wales Group include the Big Harbor, Copper City, Corbin, Keete Inlet, Khayyam, Ruby Tuesday, and Stumble-On deposits, and those in the Moira Sound unit include the Barrier Islands, Moira Copper, Niblack, and Nichols Bay deposits. Pb-isotopic signatures were determined on sulfide minerals (galena, pyrite, chalcopyrite, pyrrhotite, and sphalerite) to constrain metal sources of the massive sulfides and for comparison with data for other deposits in the region. Except for the Ruby Tuesday deposit, galena is relatively rare in most of these deposits. Pb-isotopic signatures distinguish the mainly Cu+Zn±Ag±Au massive sulfide deposits in the Wales Group from the Zn+Cu±Ag±Au massive sulfide deposits in the Moira Sound unit. Among the older group of deposits, the Khayyam deposit has the widest variation in Pb-isotopic ratios ( 206 Pb/ 204 Pb=17.169–18.021, 207 Pb/ 204 Pb=15.341–15.499, 208 Pb/ 204 Pb=36.546–37.817); data for the other massive sulfide deposits in the Wales Group overlap the isotopic variations in the Khayyam deposit. Pb-isotopic ratios for both groups of deposits are lower than those on the average crustal Pbevolution curve (µ=9.74), attesting to a large mantle influence in the Pb source. All the deposits show no evidence for Pb evolution primarily in the upper or lower continental crust. Samples from the younger group of deposits have scattered Pb-isotopic compositions and plot as a broad band on uranogenic and thorogenic Pb diagrams. Data for these deposits overlap the trend for massive sulfide deposits in the Wales Group but extend to significantly more radiogenic Pb-isotopic values. Pb-isotopic ratios of samples from the massive sulfide deposits in the Moira Sound unit plot on a different trend ( 206 Pb/ 204 Pb=17.375–19.418, 207 Pb/ 204 Pb=15.361–15.519, 208 Pb/ 204 Pb=36.856–37.241) from the steep slope defined by the massive sulfide deposits in the Wales Group. In comparison, the Pb-isotopic ratios of Devonian polymetallic (Pb-Zn-Au-Ag) quartz-sulfide veins vary widely ( 206 Pb/ 204 Pb=18.339–18.946, 207 Pb/ 204 Pb=15.447–15.561, 208 Pb/ 204 Pb=37.358–38.354), straddling the slope defined by the massive sulfide deposits in the Moira Sound unit. The general decrease in 207 Pb/ 204 Pb ratio in these deposits, relative to the average crustal Pb-evolution curve, suggests that the most likely lead sources were those associated with oceanic volcanic rocks. The massive sulfide deposits in the Wales Group may have resided within an intraoceanic tectonic setting where the mantle was the predominant contributor of metals. Some contribution from reworked arc material or recycled older, hydrothermally altered oceanic crust (including pelagic sediment) is also possible. Lead sources of the massive sulfide deposits in the Moira Sound unit also included an older source region, possibly a Late Proterozoic or Cambrian volcanosedimentary sequence and the massive sulfide deposits in the Wales Group. Preliminary regional comparison of the Pb-isotopic data indicates that the Greens Creek (Admiralty Island, Alaska) and Windy Craggy (northern British Columbia) deposits probably did not share a common lead source with the VMS deposits on Prince of Wales Island. Other sulfide occurrences on Admiralty Island are also more radiogenic than those on Prince of Wales Island. Large differences in 207 Pb/ 204 Pb ratio suggest that the lead in the VMS deposits in different parts of the Alexander terrane evolved from sources with heterogeneous U/Pb ratios, resulting from mixing of mantle and crustal components.

Alaska↗
USGS1933

Some of Alpheus Hyatt's unfigured types from the Jurassic of California

Alpheus Hyatt named a considerable number of Jurassic fossils from California. Only a few of these were described, arid none were illustrated. In this paper 16 of these species are evaluated in terms of present-day nomenclature, figures of the type specimens are shown, and their probable age significance is given. Included are Monotis semiplicata (=Entolium semiplicata),Monotis symmetrica (=Entolium symmetrica), Daonella?subjecta ( = '' Daonella" subjecta), Daonella bOchiformts (=" Daonella" bOchiformis), Daonella cardinoides (="Duonella"cardinoides), A ucella erringtoni var. arcuata ( = Buchia arcuata), Aucella elongata ( = Buchia elongata), AuceUa var.elongata orbicularis ( = Buchia sinzovi), Aucella aviculaeformis ( = Buchia erringtoni var. aviculaeformis), Aucella aviculaeformis var. acuta ( = Buchia erringtoni var. orbicularis), Aucella orb·.icularis( = Buchia erringtoni var. orbicularis), Cardioceras dub\~um ( = Amoeboceras dubium), Perisphinctes virgulatiformis ( = Viigatosphinctes virgulatiformis), Perisphinctes miihlbachi ( = Dichotomoceras miihlbachi), iJlcostephanus lindgreni ( =" Galilaeiceras" lindgreni), Oecotraustes denticulata ( = "Oecotraustes" dent-iculata).

California↗