SEARCH · Geology Reports

Results for “Contribution”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86Linked to original sources

USGS2004

Ancient wet aeolian environments on Earth: Clues to presence of fossil/live microorganisms on Mars

Ancient wet aeolian (wet-sabkha) environments on Earth, represented in the Entrada and Navajo sandstones of Utah, contain pipe structures considered to be the product of gas/water release under pressure. The sediments originally had considerable porosity allowing the ingress of living plant structures, microorganisms, clay minerals, and fine-grained primary minerals of silt and sand size from the surface downward in the sedimentary column. Host rock material is of a similar size and porosity and presumably the downward migration of fine-grained material would have been possible prior to lithogenesis and final cementation. Recent field emission scanning electron microscopy (FESEM) and EDS (energy-dispersive spectrometry) examination of sands from fluidized pipes in the Early Jurassic Navajo Sandstone reveal the presence of fossil forms resembling fungal filaments, some bearing hyphopodium-like structures similar to those produced by modern tropical leaf parasites. The tropical origin of the fungi is consistent with the paleogeography of the sandstone, which was deposited in a tropical arid environment. These fossil fungi are silicized, with minor amounts of CaCO3 and Fe, and in some cases a Si/Al ratio similar to smectite. They exist as pseudomorphs, totally depleted in nitrogen, adhering to the surfaces of fine-grained sands, principally quartz and orthoclase. Similar wet aeolian paleoenvironments are suspected for Mars, especially following catastrophic sediment-charged floods of enormous magnitudes that are believed to have contributed to rapid formation of large water bodies in the northern plains, ranging from lakes to oceans. These events are suspected to have contributed to a high frequency of constructional landforms (also known as pseudocraters) related to trapped volatiles and water-enriched sediment underneath a thick blanket of materials that were subsequently released to the martian surface, forming piping structures at the near surface and constructional landforms at the surface. This constructional process on Mars may help unravel the complex history of some of the piping structures observed on Earth; on Earth, evidence for the constructional landforms has been all but erased and the near-surface piping structures exposed through millions of years of differential erosion and topographic inversion now occur as high-standing promontories. If the features on both Earth and Mars formed by similar processes, especially involving water and other volatiles, and since the piping structures of Earth provided suitable environments for life to thrive in, the martian features in the northern plains should be considered as prime targets for physico/mineral/chemical/microbiological analyses once the astrobiological exploration of the red planet begins in earnest. ?? 2004 Elsevier Inc. All rights reserved.

Icarus↗

USGS2010

Evidence for debris flow gully formation initiated by shallow subsurface water on Mars

The morphologies of some martian gullies appear similar to terrestrial features associated with debris flow initiation, erosion, and deposition. On Earth, debris flows are often triggered by shallow subsurface throughflow of liquid water in slope-mantling colluvium. This flow causes increased levels of pore pressure and thus decreased shear strength, which can lead to slide failure of slope materials and subsequent debris flow. The threshold for pore pressure-induced failure creates a distinct relationship between the contributing area supplying the subsurface flow and the slope gradient. To provide initial tests of a similar debris flow initiation hypothesis for martian gullies, measurements of the contributing areas and slope gradients were made at the channel heads of martian gullies seen in three HiRISE stereo pairs. These gullies exhibit morphologies suggestive of debris flows such as leveed channels and lobate debris fans, and have well-defined channel heads and limited evidence for multiple flows. Our results show an area-slope relationship for these martian gullies that is consistent with that observed for terrestrial gullies formed by debris flow, supporting the hypothesis that these gullies formed as the result of saturation of near-surface regolith by a liquid. This model favors a source of liquid that is broadly distributed within the source area and shallow; we suggest that such liquid could be generated by melting of broadly distributed icy materials such as snow or permafrost. This interpretation is strengthened by observations of polygonal and mantled terrain in the study areas, which are both suggestive of near-surface ice.

Icarus↗

USGS2025

Post-traumatic stress disorder in adult population of La Palma (Spain) after the 2021 Tajogaite eruption: Environmental and sociodemographic predictors

The adverse mental health effects of exposure to disasters have long been recognized, with earthquakes, floods, tsunamis, and volcanoes (among others) contributing to anxiety, depression, and post-traumatic stress disorder (PTSD). Concerning PTSD and volcanic eruptions specifically, most studies have highlighted risk factors related to demographic and social factors (e.g., gender, age, and education), mental health, and those associated with the experience of the volcanic eruption (e.g., having evacuated). Establishing the demographic scope of those more likely to suffer PTSD following volcanic eruptions as well as understanding the aggravating factors is key to best tailor precautionary measurements and psychological interventions. In this study, we supplement these analyses by investigating the role of environmental contaminants (specifically, exposure to tephra falls and degraded air quality) together with demographic, health, and hazard experiences in contributing to PTSD. We focus on data collected after the 2021 eruption of the Tajogaite volcano (Cumbre Vieja, La Palma, Spain). Our results show that in addition to sex, education, distance from the volcano, evacuation status, health issues related to the eruption, and mental health antecedents, exposure to volcanic gas but not tephra is associated with higher PTSD scores. Our findings establish a picture of the prevalence of PTSD symptoms in various demographics groups and aggravating factors following the 2021 eruption of the Tajogaite volcano. We further call for an extended investigation (and potentially, ultimately, a mechanistic explanation) of the role of air quality (as a potential synergic hazard) in shaping mental health following exposure to a primary hazard, such as a volcanic eruption.

Canary Islands, Island of La Palma↗

USGS2010

Vadose zone attenuation of organic compounds at a crude oil spill site - Interactions between biogeochemical reactions and multicomponent gas transport

Contaminant attenuation processes in the vadose zone of a crude oil spill site near Bemidji, MN have been simulated with a reactive transport model that includes multicomponent gas transport, solute transport, and the most relevant biogeochemical reactions. Dissolution and volatilization of oil components, their aerobic and anaerobic degradation coupled with sequential electron acceptor consumption, ingress of atmospheric O 2 , and the release of CH 4 and CO 2 from the smear zone generated by the floating oil were considered. The focus of the simulations was to assess the dynamics between biodegradation and gas transport processes in the vadose zone, to evaluate the rates and contributions of different electron accepting processes towards vadose zone natural attenuation, and to provide an estimate of the historical mass loss. Concentration distributions of reactive (O 2 , CH 4 , and CO 2 ) and non-reactive (Ar and N 2 ) gases served as key constraints for the model calibration. Simulation results confirm that as of 2007, the main degradation pathway can be attributed to methanogenic degradation of organic compounds in the smear zone and the vadose zone resulting in a contaminant plume dominated by high CH 4 concentrations. In accordance with field observations, zones of volatilization and CH 4 generation are correlated to slightly elevated total gas pressures and low partial pressures of N 2 and Ar, while zones of aerobic CH 4 oxidation are characterized by slightly reduced gas pressures and elevated concentrations of N 2 and Ar. Diffusion is the most significant transport mechanism for gases in the vadose zone; however, the simulations also indicate that, despite very small pressure gradients, advection contributes up to 15% towards the net flux of CH 4 , and to a more limited extent to O 2 ingress. Model calibration strongly suggests that transfer of biogenically generated gases from the smear zone provides a major control on vadose zone gas distributions and vadose zone carbon balance. Overall, the model was successful in capturing the complex interactions between biogeochemical reactions and multicomponent gas transport processes. However, despite employing a process-based modeling approach, honoring observed parameter ranges, and generally obtaining good agreement between field observations and model simulations, accurate quantification of natural attenuation rates remains difficult. The modeling results are affected by uncertainties regarding gas phase saturations, tortuosities, and the magnitude of CH 4 and CO 2 flux from the smear zone. These findings highlight the need to better delineate gas fluxes at the model boundaries, which will help constrain contaminant degradation rates, and ultimately source zone longevity.

Minnesota↗

USGS2023

A retrospective assessment of fuel break effectiveness for containing rangeland wildfires in the sagebrush biome

Escalated wildfire activity within the western U.S. has widespread societal impacts and long-term consequences for the imperiled sagebrush ( Artemisia spp.) biome. Shifts from historical fire regimes and the interplay between frequent disturbance and invasive annual grasses may initiate permanent state transitions as wildfire frequency outpaces sagebrush communities’ innate capacity to recover. Therefore, wildfire management is at the core of conservation plans for sagebrush ecosystems, especially critical habitat for species of conservation concern such as the greater sage-grouse ( Centrocercus urophasianus ; hereafter sage-grouse). Fuel breaks help facilitate wildfire suppression by modifying behavior through fuels modification and allowing safe access points for containment by firefighters. The Bureau of Land Management has proposed to roughly double the existing fuel break network in the western U.S., centered on the Great Basin. To our knowledge, no broad-scale examination of fuel break effectiveness or the environmental conditions under which fuel breaks are expected to be most effective has been conducted. We performed a retrospective assessment of probability of fuel break contributing to wildfire containment on recorded wildfire and fuel break interactions from 1985 to 2018 within the western U.S. We characterized environmental, fuels, and weather conditions within 500 m of wildfire contact, and within 5 km of the approaching wildfire. We used a binomial mixed model within a Bayesian framework to identify relationships between these variables and fuel break success. Fuel breaks were least successful in areas classified as having low resilience to disturbance and low resistance to invasion, in areas composed of primarily woody fuels, and when operating in high temperature and low precipitation conditions. Fuel breaks were most effective in areas where fine fuels dominated and in areas that were readily accessible. Maintenance history and fuel break type also contributed to the probability of containment. Overall results indicate a complex and sometimes paradoxical relationship between landscape characteristics that promote wildfire spread and those that impact fuel break effectiveness. Finally, we developed predictive maps of fuel break effectiveness by fuel break type to further elucidate these complex relationships and to inform urgently needed fuel break placement and maintenance priorities across the sagebrush biome.

Journal of Environmental Management↗

USGS2023

Water-soluble organic carbon release from mineral soils and sediments in an irrigated agricultural system

Water interactions with soil and vegetation are greatly altered in agricultural watersheds compared to natural landscapes, which impacts sources and fates of organic carbon (OC). While mineral soil horizons in natural ecosystems primarily act as filters for dissolved organic carbon (DOC) leached from organic surface horizons, tilled soils largely lack an organic horizon and their mineral horizons therefore act as a source for both DOC and sediment to surface waters. Irrigated watersheds highlight this difference, as DOC and total suspended sediment (TSS) concentrations simultaneously increase during the low-discharge irrigation season, suggesting that sediment-associated OC may constitute a significant source of DOC. While water-soluble OC (WSOC) from sediments and soils has been found to be compositionally similar to stream DOC, these contributions remain poorly quantified in agricultural streams. To address this, we conducted abiotic solubilization experiments using sediments (suspended and bed) and soils from an irrigated agricultural watershed in northern California, USA. Sediments (R 2 > 0.99) and soils (0.74 < R 2 < 0.89) displayed linear solubilization behaviors over the range of concentrations tested. Suspended sediment from the irrigation season exhibited the largest solubilization efficiency (10.9 ± 1.6% TOC sediment solubilized) and potential (1.79 ± 0.26 mg WSOC g −1 dry sediment), followed by suspended sediment from a winter storm, then bed sediment and soils. Successive solubilization experiments increased the total release of WSOC by ∼50%, but most (88–97%) of the solid-phase OC remained insoluble in water. Using these solubilization potential estimates and measured TSS concentrations, we estimated that WSOC from suspended sediment in streams represented 4–7% of the annual DOC export from the watershed. However, field sediment export is much higher than what is represented by suspended sediment in the water column, therefore field-scale contributions from sediments could be much higher than estimated.

California↗

USGS2015

PCB concentrations of lake whitefish ( Coregonus clupeaformis ) vary by sex

We determined whole-fish polychlorinated biphenyl (PCB) concentrations in 26 female lake whitefish ( Coregonus clupeaformis ) and 34 male lake whitefish from northern Lake Huron. In 5 of the 26 female lake whitefish, we also determined PCB concentrations in the somatic tissue and ovaries. In addition, bioenergetics modeling was used to determine the contribution of the growth dilution effect to the observed difference in PCB concentrations between the sexes. Whole-fish PCB concentrations for females and males averaged 60 ng/g and 80 ng/g, respectively; thus males were 34% higher in PCB concentration compared with females. Based on the PCB determinations in the somatic tissue and ovaries, we predicted that PCB concentration of females would increase by 2.5%, on average, immediately after spawning due to release of eggs. Thus, the change in PCB concentration due to release of eggs did not explain, to any degree, the higher PCB concentrations observed in males compared with females. Bioenergetics modeling results indicated that the growth dilution effect could account for males being only 0.7% higher in PCB concentration compared with females. Thus, the growth dilution effect contributed very little to the observed difference in PCB concentrations between the sexes. We conclude that males were higher than females in PCB concentration most likely due to a higher rate of energy expenditure, stemming from greater activity and a greater resting metabolic rate. A higher rate of energy expenditure leads to a higher rate of food consumption, which, in turn, leads to a higher PCB accumulation rate.

Michigan↗

USGS2016

Mixed stock analysis of Lake Michigan's Lake Whitefish Coregonus clupeaformis commercial fishery

Lake whitefish ( Coregonus clupeaformis ) support the primary commercial fishery in Lake Michigan. Discrete genetic stocks of lake whitefish have been identified and tagging data suggest stocks are mixed throughout much of the year. Our objectives were to determine if (1) differential stock harvest occurs in the commercial catch, (2) spatial differences in genetic composition of harvested fish were present, and (3) seasonal differences were present in the harvest by commercial fisheries that operate in management zones WI-2 and WFM-01 (Green Bay, Lake Michigan). Mixed stock analysis was conducted on 17 commercial harvest samples (n = 78–145/sample) collected from various ports lake-wide during 2009–2010. Results showed significant mixing with variability in stock composition across most samples. Samples consisted of two to four genetic stocks each accounting for ≥ 10% the catch. In 10 of 17 samples, the stock contributing the largest proportion made up < 60% of the harvest. In general, seasonal and annual differences existed in the proportional stock contribution at a single capture location. Samples from Wisconsin's primary commercial fishing management zone (WI-2) were composed predominately of fish from the Big Bay de Noc (Michigan) stock as opposed to the geographically proximate, North–Moonlight Bay (Wisconsin) stock. These findings have implications for management and allocation of fish to various quotas. Specifically, geographic location of harvest, the current means of allocating harvest quotas, is not the best predictor of genetic stock harvest.

Lake Michigan↗

USGS2016

Internal loading of phosphorus in western Lake Erie

This study applied eight techniques to obtain estimates of the diffusive flux of phosphorus (P) from bottom sediments throughout the western basin of Lake Erie. The flux was quantified from both aerobic and anaerobic incubations of whole cores; by monitoring the water encapsulated in bottom chambers; from pore water concentration profiles measured with a phosphate microelectrode, a diffusive equilibrium in thin films (DET) hydrogel, and expressed pore waters; and from mass balance and biogeochemical diagenetic models. Fluxes under aerobic conditions at summertime temperatures averaged 1.35 mg P/m 2 /day and displayed spatial variability on scales as small as a centimeter. Using two different temperature correction factors, the flux was adjusted to mean annual temperature yielding average annual fluxes of 0.43–0.91 mg P/m 2 /day and a western basin-wide total of 378–808 Mg P/year as the diffusive flux from sediments. This is 3–7% of the 11,000 Mg P/year International Joint Commission (IJC) target load for phosphorus delivery to Lake Erie from external sources. Using these average aerobic fluxes, the sediment contributes 3.0–6.3 μg P/L as a background internal contribution that represents 20–42% of the IJC Target Concentration of 15 μg P/L for the western basin. The implication is that this internal diffusive recycling of P is unlikely to trigger cyanobacterial blooms by itself but is sufficiently large to cause blooms when combined with external loads. This background flux may be also responsible for delayed response of the lake to any decrease in the external loading.

Lake Erie↗

USGS2022

Stream corridor and upland sources of fluvial sediment and phosphorus from a mixed urban-agricultural tributary to the Great Lakes

Like many impaired Great Lakes tributaries, Apple Creek, Wisconsin (119 km 2 ) has Total Maximum Daily Load (TMDL) targets for reducing suspended sediment and total phosphorus by 51.2 % and 64.2 %, respectively. From August 2017 - October 2018, a stream sediment budget and fingerprinting integrated study was conducted to quantify upland and stream corridor sources of suspended sediment and sediment-bound phosphorus. Phosphorus concentrations varied among source groups and fluvial sediments, with higher concentrations among suspended sediment and cropland soils. Eroding streambanks identified in the stream corridor sediment budget accounted for 100 % of the TMDL Soil and Water Assessment Tool (SWAT) suspended sediment load but only 20 % of the total phosphorus load. Fine-grained streambed sediment equated to approximately-three years of modeled suspended sediment load but only one third of total phosphorus load. The two primary sources of fine-grained streambed sediment were streambanks and cropland, with relative streambank contributions increasing with downstream direction and watershed area. The relative proportion of suspended sediment varied by season and streamflow; however, cropland and streambank erosion accounted for 54 % and 23 % of the suspended sediment when weighted by of the proportion for representative streamflow. Urban land was a source in the upper watershed, but the signature was sequestered by a mid-watershed detention basin. Contributions from construction sites were higher in the fall 2018, likely corresponding to increased activity following a wet spring. These integrated techniques helped describe sources, transport, and sinks of fluvial sediment and phosphorus throughout the watershed at a range of spatial and temporal scales.

Wisconsin↗

USGS2025

Changes in phosphorus concentration and flux from 2011 to 2023 in major U.S. tributaries to the Laurentian Great Lakes

Reducing phosphorus (P) flux to the Great Lakes is critical for improving water quality and controlling eutrophication. We used 13 water years (2011–2023) of U.S. Geological Survey data from 24 major U.S. tributaries (representing 47% of the U.S. Great Lakes watershed area) to evaluate temporal changes in orthophosphate (PO 4 -P) and total P (TP) using Weighted Regressions on Time, Discharge, and Season. We assessed actual and flow-normalized P concentrations and fluxes. Between 2011 and 2023, P concentrations and fluxes declined in many tributaries, although the extent and significance of these declines varied. Decreases were more common and statistically likely for TP than PO 4 -P, and several high-loading watersheds had modest or non-significant changes. Flow-normalized PO 4 -P:TP flux ratios increased in over half the tributaries, suggesting that even where P reductions occurred, reductions in the more bioavailable P fraction were proportionally smaller. Actual P fluxes were strongly correlated with streamflow, and year-to-year variability in actual fluxes was, on average, three times greater than variability related to trends in flow-normalized fluxes. This underscores the role of hydrology in modulating P export and highlights how changing precipitation and runoff patterns can obscure or counteract management progress. Spring accounted for the largest share of annual P flux in most tributaries, though many showed declining spring contributions. Our basin-wide analysis reveals that while management efforts may have yielded progress in reducing TP in many watersheds, additional strategies would be needed to address PO 4 -P reductions and account for changing hydrology, especially in high-contributing watersheds.

Journal of Great Lakes Research↗

USGS2004

Contamination of groundwater under cultivated fields in an arid environment, central Arava Valley, Israel

The purpose of this study is to obtain a better understanding of groundwater contamination processes in an arid environment (precipitation of 50 mm/year) due to cultivation. Additional aims were to study the fate of N, K, and other ions along the whole hydrological system including the soil and vadose zone, and to compare groundwater in its natural state with contaminated groundwater (through the drilling of several wells). A combination of physical, chemical, and isotopic analyses was used to describe the hydrogeological system and the recharge trends of water and salts to the aquifers. The results indicate that intensive irrigation and fertilization substantially affected the quantity and quality of groundwater recharge. Low irrigation efficiency of about 50% contributes approximately 3.5–4 million m 3 /year to the hydrological system, which corresponds to 0.65 m per year of recharge in the irrigated area, by far the most significant recharge mechanism. Two main contamination processes were identified, both linked to human activity: (1) salinization due to circulation of dissolved salts in the irrigation water itself, mainly chloride, sulfate, sodium and calcium, and (2) direct input of nitrate and potassium mainly from fertilizers. The nitrate concentrations in a local shallow groundwater lens range between 100 and 300 mg/l and in the upper sub-aquifer are over 50 mg/l. A major source of nitrate is fertilizer N in the excess irrigation water. The isotopic compositions of δ 15 N–NO 3 (range of 4.9–14.8‰) imply also possible contributions from nearby sewage ponds and/or manure. Other evidence of contamination of the local groundwater lens includes high concentrations of K (20–120 mg/l) and total organic carbon (about 10 mg/l).

Journal of Hydrology↗

USGS2005

Investigating surface water-well interaction using stable isotope ratios of water

Because surface water can be a source of undesirable water quality in a drinking water well , an understanding of the amount of surface water and its travel time to the well is needed to assess a well's vulnerability. Stable isotope ratios of oxygen in river water at the City of La Crosse, Wisconsin, show peak-to-peak seasonal variation greater than 4‰ in 2001 and 2002. This seasonal signal was identified in 7 of 13 city municipal wells, indicating that these 7 wells have appreciable surface water contributions and are potentially vulnerable to contaminants in the surface water. When looking at wells with more than 6 sampling events, a larger variation in δ 18 O compositions correlated with a larger fraction of surface water, suggesting that samples collected for oxygen isotopic composition over time may be useful for identifying the vulnerability to surface water influence even if a local meteoric water line is not available. A time series of δ 18 O from one of the municipal wells and from a piezometerlocated between the river and the municipal well showed that the travel time of flood water to the municipal well was approximately 2 months; non-flood arrival times were on the order of 9 months. Four independent methods were also used to assess time of travel. Three methods (groundwater temperature arrival times at the intermediate piezometer, virus-culture results, and particle tracking using a numerical groundwater-flow model) yielded flood and non-flood travel times of less than 1 year for this site. Age dating of one groundwater sample using 3 H– 3 He methods estimated an age longer than 1 year, but was likely confounded by deviations from piston flow as noted by others. Chlorofluorocarbons and SF 6 analyses were not useful at this site due to degradation and contamination, respectively. This work illustrates the utility of stable hydrogen and oxygen isotope ratios of water to determine the contribution and travel time of surface water in groundwater, and demonstrates the importance of using multiple methods to improve estimates for time of travel of 1 year or less.

Journal of Hydrology↗

USGS2005

Coupled inverse modeling of vadose zone water, heat, and solute transport: Calibration constraints, parameter nonuniqueness, and predictive uncertainty

In this study, an inverse methodology is presented and used to evaluate the effect that calibration of a synthetic artificial recharge model, constrained by different combinations of measurements (pressure head, temperature, and concentration), has on estimated vadose zone model parameter-value nonuniqueness and predictive water, heat, and solute transport uncertainty. Several findings are arrived at following model calibration and predictive analysis. First, composite scaled sensitivities revealed that all calibration measurement combinations contributed to the estimation of 30 water, heat, and solute transport parameters by inverting a set of vadose zone transport equations that were coupled explicitly through dependent variables and implicitly through parameters and fluid properties. Second, despite excellent model quality and perfect match of simulated-to-measured dependent field variables, the limitations in information content of field measurements used to constrain the calibration process promoted correlation among parameters; correlation among parameters promoted parameter nonuniqueness; and parameter nonuniqueness promoted predictive uncertainty. Consequently, simulations by transport models calibrated against field information represent a single realization associated with some quantifiable range of predictive uncertainty. Third, a primary reduction in uncertainty was achieved by increasing the number of calibration-constraint measurements, but reductions in uncertainty appeared restricted implying a practical limit to parameterization detail. Fourth, for a fixed number of measurements, a less prominent reduction in the range of predictive uncertainty could be realized through selective use of measurement types to constrain the calibration process. Therefore, field measurement types used to constrain the calibration process should be matched to target predictions. Fifth, because correlation among parameters contributes to predictive uncertainty, it may be possible to further reduce predictive uncertainty by estimating parameters that also minimize the largest eigenvalue in the normalized eigenvector matrix.

Journal of Hydrology↗

USGS2009

Interbasin flow in the Great Basin with special reference to the southern Funeral Mountains and the source of Furnace Creek springs, Death Valley, California, U.S.

Interbasin flow in the Great Basin has been established by scientific studies during the past century. While not occurring uniformly between all basins, its occurrence is common and is a function of the hydraulic gradient between basins and hydraulic conductivity of the intervening rocks. The Furnace Creek springs in Death Valley, California are an example of large volume springs that are widely accepted as being the discharge points of regional interbasin flow. The flow path has been interpreted historically to be through consolidated Paleozoic carbonate rocks in the southern Funeral Mountains. This work reviews the preponderance of evidence supporting the concept of interbasin flow in the Death Valley region and the Great Basin and addresses the conceptual model of pluvial and recent recharge [Nelson, S.T., Anderson, K., Mayo, A.L., 2004. Testing the interbasin flow hypothesis at Death Valley, California. EOS 85, 349; Anderson, K., Nelson, S., Mayo, A., Tingey, D., 2006. Interbasin flow revisited: the contribution of local recharge to high-discharge springs, Death Valley, California. Journal of Hydrology 323, 276-302] as the source of the Furnace Creek springs. We find that there is insufficient modern recharge and insufficient storage potential and permeability within the basin-fill units in the Furnace Creek basin for these to serve as a local aquifer. Further, the lack of high sulfate content in the spring waters argues against significant flow through basin-fill sediments and instead suggests flow through underlying consolidated carbonate rocks. The maximum temperature of the spring discharge appears to require deep circulation through consolidated rocks; the Tertiary basin fill is of insufficient thickness to generate such temperatures as a result of local fluid circulation. Finally, the stable isotope data and chemical mass balance modeling actually support the interbasin flow conceptual model rather than the alternative presented in Nelson et al. [Nelson, S.T., Anderson, K., Mayo, A.L., 2004. Testing the interbasin flow hypothesis at Death Valley, California. EOS 85, 349] and Anderson et al. [Anderson, K., Nelson, S., Mayo, A., Tingey, D., 2006. Interbasin flow revisited: the contribution of local recharge to high-discharge springs, Death Valley, California. Journal of Hydrology 323, 276-302]. In light of these inconsistencies, interbasin flow is the only readily apparent explanation for the large spring discharges at Furnace Creek and, in our view, is the likely explanation for most large volume, low elevation springs in the Great Basin. An understanding of hydrogeologic processes that control the rate and direction of ground-water flow in eastern and central Nevada is necessary component of regional water-resource planning and management of alluvial and bedrock aquifers.

Journal of Hydrology↗

USGS2013

Estimating instream constituent loads using replicate synoptic sampling, Peru Creek, Colorado

The synoptic mass balance approach is often used to evaluate constituent mass loading in streams affected by mine drainage. Spatial profiles of constituent mass load are used to identify sources of contamination and prioritize sites for remedial action. This paper presents a field scale study in which replicate synoptic sampling campaigns are used to quantify the aggregate uncertainty in constituent load that arises from (1) laboratory analyses of constituent and tracer concentrations, (2) field sampling error, and (3) temporal variation in concentration from diel constituent cycles and/or source variation. Consideration of these factors represents an advance in the application of the synoptic mass balance approach by placing error bars on estimates of constituent load and by allowing all sources of uncertainty to be quantified in aggregate; previous applications of the approach have provided only point estimates of constituent load and considered only a subset of the possible errors. Given estimates of aggregate uncertainty, site specific data and expert judgement may be used to qualitatively assess the contributions of individual factors to uncertainty. This assessment can be used to guide the collection of additional data to reduce uncertainty. Further, error bars provided by the replicate approach can aid the investigator in the interpretation of spatial loading profiles and the subsequent identification of constituent source areas within the watershed. The replicate sampling approach is applied to Peru Creek, a stream receiving acidic, metal-rich effluent from the Pennsylvania Mine. Other sources of acidity and metals within the study reach include a wetland area adjacent to the mine and tributary inflow from Cinnamon Gulch. Analysis of data collected under low-flow conditions indicates that concentrations of Al, Cd, Cu, Fe, Mn, Pb, and Zn in Peru Creek exceed aquatic life standards. Constituent loading within the study reach is dominated by effluent from the Pennsylvania Mine, with over 50% of the Cd, Cu, Fe, Mn, and Zn loads attributable to a collapsed adit near the top of the study reach. These estimates of mass load may underestimate the effect of the Pennsylvania Mine as leakage from underground mine workings may contribute to metal loads that are currently attributed to the wetland area. This potential leakage confounds the evaluation of remedial options and additional research is needed to determine the magnitude and location of the leakage.

Colorado↗

USGS2013

Characterizing response of total suspended solids and total phosphorus loading to weather and watershed characteristics for rainfall and snowmelt events in agricultural watersheds

Understanding the response of total suspended solids (TSS) and total phosphorus (TP) to influential weather and watershed variables is critical in the development of sediment and nutrient reduction plans. In this study, rainfall and snowmelt event loadings of TSS and TP were analyzed for eight agricultural watersheds in Wisconsin, with areas ranging from 14 to 110 km2 and having four to twelve years of data available. The data showed that a small number of rainfall and snowmelt runoff events accounted for the majority of total event loading. The largest 10% of the loading events for each watershed accounted for 73–97% of the total TSS load and 64–88% of the total TP load. More than half of the total annual TSS load was transported during a single event for each watershed at least one of the monitored years. Rainfall and snowmelt events were both influential contributors of TSS and TP loading. TSS loading contributions were greater from rainfall events at five watersheds, from snowmelt events at two watersheds, and nearly equal at one watershed. The TP loading contributions were greater from rainfall events at three watersheds, from snowmelt events at two watersheds and nearly equal at three watersheds. Stepwise multivariate regression models for TSS and TP event loadings were developed separately for rainfall and snowmelt runoff events for each individual watershed and for all watersheds combined by using a suite of precipitation, melt, temperature, seasonality, and watershed characteristics as predictors. All individual models and the combined model for rainfall events resulted in two common predictors as most influential for TSS and TP. These included rainfall depth and the antecedent baseflow. Using these two predictors alone resulted in an R 2 greater than 0.7 in all but three individual models and 0.61 or greater for all individual models. The combined model yielded an R 2 of 0.66 for TSS and 0.59 for TP. Neither the individual nor the combined models were substantially improved by using additional predictors. Snowmelt event models were statistically significant for individual and combined watershed models, but the model fits were not all as good as those for rainfall events (R 2 between 0.19 and 0.87). Predictor selection varied from watershed to watershed, and the common variables that were selected were not always selected in the same order. Influential variables were commonly direct measures of moisture in the watershed such as snowmelt, rainfall + snowmelt, and antecedent baseflow, or measures of potential snowmelt volume in the watershed such as air temperature.

Wisconsin↗

USGS2014

Natural uranium and strontium isotope tracers of water sources and surface water-groundwater interactions in arid wetlands: Pahranagat Valley, Nevada, USA

Near-surface physical and chemical process can strongly affect dissolved-ion concentrations and stable isotope compositions of water in wetland settings, especially under arid climate conditions. In contrast, heavy radiogenic isotopes of strontium ( 87 Sr/ 86 Sr) and uranium ( 234 U/ 238 U) remain largely unaffected and can be used to help identify unique signatures from different sources and quantify end-member mixing that would otherwise be difficult to determine. The utility of combined Sr and U isotopes are demonstrated in this study of wetland habitats on the Pahranagat National Wildlife Refuge, which depend on supply from large-volume springs north of the Refuge, and from small-volume springs and seeps within the Refuge. Water budgets from these sources have not been quantified previously. Evaporation, transpiration, seasonally variable surface flow, and water management practices complicate the use of conventional methods for determining source contributions and mixing relations. In contrast, 87 Sr/ 86 Sr and 234 U/ 238 U remain unfractionated under these conditions, and compositions at a given site remain constant. Differences in Sr- and U-isotopic signatures between individual sites can be related by simple two- or three-component mixing models. Results indicate that surface flow constituting the Refuge’s irrigation source consists of a 65:25:10 mixture of water from two distinct regionally sourced carbonate aquifer springs, and groundwater from locally sourced volcanic aquifers. Within the Refuge, contributions from the irrigation source and local groundwater are readily determined and depend on proximity to those sources as well as water management practices.

Nevada↗